Search Results

Search found 22007 results on 881 pages for 'variable reference'.

Page 297/881 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• django: cannot import settings, cannot login to admin, cannot change admin password

  - by xpanta

  Hi, It seems that I am completely lost here. Yesterday I noticed that I cannot login to the admin panel (don't use it much, so it's been some weeks since last login). I thought that I might have changed the admin password and now I can't remember it (though I doubt it). I tried django-admin.py changepassword (using django 1.2.1) but it said that 'changepassword' is unknown command (I have all the necessary imports in my settings.py. Admin interface used to work ok). Then I gave a django-admin.py validate. Then the hell begun. django-admin.py validate gave me this error: Error: Settings cannot be imported, because environment variable DJANGO_SETTINGS_MODULE is undefined. I then gave a set DJANGO_SETTINGS_MODULE=myproject.settings and then again a django-admin.py validate This is what I get now: Error: Could not import settings 'myproject.settings' (Is it on sys.path? Does it have syntax errors?): No module named myproject.settings and now I am lost. I tried django console and sys.path.append('c:\workspace') or sys.append('c:\workspace\myproject') but still get the same errors. I use windows 7 and my project dir is c:\workspace. I don't use a PYTHONPATH variable (although I tried setting it temporarily to C:\workspace but I still get the same error). I don't use Apache, just the django development server. What am I doing wrong? My web page works fine. I think that the fact that I can't login as admin is related to the previous import error, no? PS: I also tried this: http://coderseye.com/2007/howto-reset-the-admin-password-in-django.html but still I couldn't change admin password for some reason. Although I could create another admin user (with which I couldn't login).

  Read the article

• C# compiler error CS0006: metadata file is not found

  - by Rob

  I've built a c# compiler using the tutorial on MSDN and a few other resources including here, and I've gotten it to work until I add additional reference assemblies. My errors stem from adding "System.dll" and "System.Windows.Forms.dll" to the ReferenceAssemblies list. here's my code: private void SetUpCompilingParameters() { string ver = string.Format("{0}.{1}.{2}", Environment.Version.Major, Environment.Version.MajorRevision, Environment.Version.Build); string libDir = string.Format(@"{0}", Environment.CurrentDirectory); string raDir = @"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0"; string exWpfDir = string.Format(@"C:\WINDOWS\Microsoft.NET\Framework\v{0}\WPF", ver); string exDir = string.Format(@"C:\WINDOWS\Microsoft.NET\Framework\v{0}", ver); MyCompiler = new CSharpCodeProvider(); CompilingParam = new CompilerParameters(); CompilingParam.GenerateExecutable = false; CompilingParam.GenerateInMemory = true; CompilingParam.IncludeDebugInformation = false; CompilingParam.TreatWarningsAsErrors = false; CompilingParam.CompilerOptions = string.Format("/lib:{0}", libDir); CompilingParam.CompilerOptions = string.Format("/lib:{0}", raDir); CompilingParam.CompilerOptions = string.Format("/lib:{0}", exDir); //CompilingParam.CompilerOptions = string.Format("/lib:{0}", exWpfDir); CompilingParam.ReferencedAssemblies.Add("System.dll"); CompilingParam.ReferencedAssemblies.Add("System.Windows.Forms.dll"); } As you can see, I've explicitly referenced directories in CompilerOptions but its not helping. I'd like to test the solution on here on stackoverflow that utilizes: CompilingParam.ReferencedAssemblies.Add(typeof(System.Xml.Linq.Extensions).Assembly.Location); but I'm having trouble using it for the general System.dll etc...

  Read the article

• How to handle SalesForce WSDL files for sandbox and production sites in ASP.Net?

  - by Traveling Tech Guy

  I need to authenticate users and get info about them from an ASP.Net application. Since I have 2 sites (sandbox, production) and 2 org IDs - I needed to generate 2 SalesForce WSDL files. I diffed the 2 files (each about 600kb in size) and while they are 95% the same, there are enough differences strewn all over the place - enough for me to need to use them both. I added both as web references to my solution, and here's where my problem starts.Obviously, I cannot use both references in the same file, as they contain the same classes/functions. I had to write a quick-and-dirty solution over the weekend, so I just created 2 classes - each using a different web reference - but otherwise the exact functionality, and I use the appropriate one, based on the URL the user is coming from. This works well, but strikes me as a bad (read: quick-and-dirty) solution. My question: is there any way to do one or more of the following: change the web reference on the fly? use both web references in the same file, but put one in a different namespace? find a better solution to the whole situation? I nd up with a huge XmlSerializer.dll (3mb!) - probably due to using both huge WSDL files. Thanks for your time.

  Read the article

• nested insert exec work around

  - by stackoverflowuser

  i have 2 stored procedures usp_SP1 and usp_SP2. Both of them make use of insert into #tt exec sp_somesp. I wanted to created a 3rd stored procedure which will decide which stored proc to call. something like create proc usp_Decision ( @value int ) as begin if (@value = 1) exec usp_SP1 -- this proc already has insert into #tt exec usp_somestoredproc else exec usp_SP2 -- this proc too has insert into #tt exec usp_somestoredproc end Later realized I needed some structure defined for the return value from usp_Decision so that i can populate the SSRS dataset field. So here is what i tried: within usp_Decision created a temp table and tried to do "insert into #tt exec usp_SP1". Didn't work out. error "insert exec cannot be nested" within usp_Decision tried passing table variable to each of the stored proc and update the table within the stored procs and do "select * from ". That didnt work out as well. Table variable passed as parameter cannot be modified within the stored proc. Pls. suggest what can de done?

  Read the article

• How can use the currently displayed node to filter a block-level view on that node's page?

  - by Deane

  I have parent/child relationship set up via Node Reference. A Child record can have a Parent record selected from a Node Reference field (this is optional -- I can have Parent-less Children as well). I've created a Views block to appear on the Parent pages, below the content. It's going to show a table of all the Child nodes for that Parent. Problem is, right now it shows every Child node. I need to filter it for just the Parent being displayed. What I need to be able to do is add a filter to this View to effectively say, "Only show the Child nodes that are assigned to the Parent being displayed on this page." So, somehow I need to be able to get the Nid of the currently displaying node (which will be a Parent, in all cases when this block is displayed), and use that in a filter in my View. How exactly can I do this? (Initially I used an attachment view for this (as this page instructs). I created a page view to display the Parent, then an attachment view to display all the Children, then attached that under the page view. This worked, but it was almost absurdly complicated to set up, and it was an undesirable for a number of other reasons -- primarily that my Parent now has two dedicated URLs, it's own node-level page, and the similar page created by this view.) Using Drupal 6.15.

  Read the article

• Embedding Lua functions as member variables in Java

  - by Zarion

  Although the program I'm working on is in Java, answering this from a C perspective is also fine, considering that most of this is either language-agnostic, or happens on the Lua side of things. In the outline I have for the architecture of a game I'm programming, individual types of game objects within a particular class (eg: creatures, items, spells, etc.) are loaded from a data file. Most of their properties are simple data types, but I'd like a few of these members to actually contain simple scripts that define, for example, what an item does when it's used. The scripts will be extremely simple, since all fundamental game actions will be exposed through an API from Java. The Lua is simply responsible for stringing a couple of these basic functions together, and setting arguments. The question is largely about the best way to store a reference to a specific Lua function as a member of a Java class. I understand that if I store the Lua code as a string and call lua_dostring, Lua will compile the code fresh every time it's called. So the function needs to be defined somehow, and a reference to this specific function wrapped in a Java function object. One possibility that I've considered is, during the data loading process, when the loader encounters a script definition in a data file, it extracts this string, decorates the function name using the associated object's unique ID, calls lua_dostring on the string containing a full function definition, and then wraps the generated function name in a Java function object. A function declared in script run with lua_dostring should still be added to the global function table, correct? I'm just wondering if there's a better way of going about this. I admit that my knowledge of Lua at this point is rather superficial and theoretical, so it's possible that I'm overlooking something obvious.

  Read the article

• Query on object id in VQL

  - by Banang

  I'm currently working with the versant object database (using jvi), and have a case where I need to query the database based on an object id. What I'm trying to achieve is something along the lines of Employee employee = new Employee("Mr. Pickles"); session.commit(); FundVQLQuery q = new FundVQLQuery(session, "select * from Employee employee where employee = $1"); q.bind(employee); q.execute(); However, I'm finding out the hard way (I get an EVJ_NOT_A_VALID_KEY_TYPE error thrown at me) that this is infact not the way to do it. Anyone got any experience in working with VQL? Your help is much apreciated! A small clarification: The problem is I'm running some performance tests on the database using the pole position framework, and one of the tests in that framework requires me to fetch an object from the database using either an object reference or a low level object id. Thus, I'm not allowed to reference specific fields in the employee object, but must perform the query on the object in its entirety. So, it's not allowed for me to go "select * from Employee e where e.id = 4", I need it to use the entire object. Accepted answer: Since there is some sort of lunacy magic built into SO that prevents me to mark an accepted answer after a bounty has run out, readers should know that the answer posted by Chris Holmes solves this issue. Readers are encouraged to up-vote his post to further signalize the correctness of his answer to any future readers of this thread.

  Read the article

• In languages which create a new scope each time in a loop block, a new local copy of the local loop

  - by Jian Lin

  It seems that in language like C, Java, and Ruby (as opposed to Javascript), a new scope is created for each iteration of a loop block, and the local variable defined for the loop is actually made into a local variable every single time and recorded in this new scope? For example, in Ruby: p RUBY_VERSION $foo = [] (1..5).each do |i| $foo[i] = lambda { p i } end (1..5).each do |j| $foo[j].call() end the print out is: [MacBook01:~] $ ruby scope.rb "1.8.6" 1 2 3 4 5 [MacBook01:~] $ So, it looks like when a new scope is created, a new local copy of i is also created and recorded in this new scope, so that when the function is executed at a later time, the "i" is found in those scope chains as 1, 2, 3, 4, 5 respectively. Is this true? (It sounds like a heavy operation). Contrast that with p RUBY_VERSION $foo = [] i = 0 (1..5).each do |i| $foo[i] = lambda { p i } end (1..5).each do |j| $foo[j].call() end This time, the i is defined before entering the loop, so Ruby 1.8.6 will not put this i in the new scope created for the loop block, and therefore when the i is looked up in the scope chain, it always refer to the i that was in the outside scope, and give 5 every time: [MacBook01:~] $ ruby scope2.rb "1.8.6" 5 5 5 5 5 [MacBook01:~] $ I heard that in Ruby 1.9, i will be treated as a local defined for the loop even when there is an i defined earlier? The operation of creating a new scope, creating a new local copy of i each time through the loop seems heavy, as it seems it wouldn't have matter if we are not invoking the functions at a later time. So when the functions don't need to be invoked at a later time, could the interpreter and the compiler to C / Java try to optimize it so that there is not local copy of i each time?

  Read the article

• Reading a large file into Perl array of arrays and manipulating the output for different purposes

  - by Brian D.

  Hello, I am relatively new to Perl and have only used it for converting small files into different formats and feeding data between programs. Now, I need to step it up a little. I have a file of DNA data that is 5,905 lines long, with 32 fields per line. The fields are not delimited by anything and vary in length within the line, but each field is the same size on all 5905 lines. I need each line fed into a separate array from the file, and each field within the line stored as its own variable. I am having no problems storing one line, but I am having difficulties storing each line successively through the entire file. This is how I separate the first line of the full array into individual variables: my $SampleID = substr("@HorseArray", 0, 7); my $PopulationID = substr("@HorseArray", 9, 4); my $Allele1A = substr("@HorseArray", 14, 3); my $Allele1B = substr("@HorseArray", 17, 3); my $Allele2A = substr("@HorseArray", 21, 3); my $Allele2B = substr("@HorseArray", 24, 3); ...etc. My issues are: 1) I need to store each of the 5905 lines as a separate array. 2) I need to be able to reference each line based on the sample ID, or a group of lines based on population ID and sort them. I can sort and manipulate the data fine once it is defined in variables, I am just having trouble constructing a multidimensional array with each of these fields so I can reference each line at will. Any help or direction is much appreciated. I've poured over the Q&A sections on here, but have not found the answer to my questions yet. Thanks!! -Brian

  Read the article

• JSF/Seam - new component instance on submit?

  - by purecharger

  And my confusion with JSF continues. This is a continuation of a question asked yesterday, but I feel it warrants a new question. I have a single seam component that expects a URL parameter to be injected for retrieving a List<String> from a method. This works perfectly on the first navigation to the page. The List is used to display many different selectOneRadio groups that populate a <h:form/>. Now on the submit, I cannot get the URL parameter to be injected or otherwise set on the component! Adding <h:inputHidden/> causes FacesExceptions to be thrown. Then I tried setting the List as an instance variable on the object, and when the subsequent call is made on the submit (which I also do not understand why that is done) I check to see if the variable is non-null: if it isn't, return it. Now I found that a new instance of the component is created on submit!!! getList() called this.toString(): .BeanAction@5fd98420 #### This is when submit is clicked getList() called this.toString(): .BeanAction@22aacbce The component has the following annotations: Stateful @Scope(ScopeType.CONVERSATION) @Name("bean") @Restrict("#{identity.loggedIn}") Can someone explain why there is a new instance of the component created? I'm really not quite sure how to go about handling this. I thought the hidden parameter would work, because that is how I would do it with straight HTML, and I'm a little surprised that its not working for JSF/Seam.

  Read the article

• Merging datasets based on 2 variables in SAS.

  - by John

  Hye Guys, my question is the following, i'm working with different databases, all contain information about 1000+ companies, a company is defined by its ticker code (the short version of the name( Ford as F) usually seen on stock quotation boards). Aside from the ticker code to merge on I also have to merge on the time, I used month as a count variable throughout my time series. The final purpose is to have a regression in the kind of Y(jt) = c + X(jt) +X1(jt) etc with j = company (ticker) and t = time (month). So imagine I have 2 databases, one which is the base database with variables such as Tickers, months, beta's of a company (risk measure) etc and a second database which has an extra variable (let's say market capitalisation). What I want to do then is to merge these 2 databases based on the ticker and the month. Example: Base database: Ticker __ Month __ Betas AA __ 4 __ 1.2 BB __ 8 __ 1.18 Second database: Ticker __ Month __ MCAP AA __ 4 __ 8542 BB __ 6 __ 1245 Then after merge I would like to have something like this: Ticker __ Month _ Betas ___ MCAP AA __ 4 _ 1.2 ___ 8542 So all observations that do not match BOTH date and ticker have to be dropped, I'm sure this is possible, just can't find the right type of code. Thanks! PS: I'm guessing the underscars have something to do with font layout but both the bold as italic is supposed to be normal :)

  Read the article

• PHP syntax for referencing self with late static binding

  - by Chris

  When I learned PHP it was pretty much in procedural form, more recently I've been trying to adapt to the OOP way of doing things. Hoever the tutorials I've been following were produced before PHP 5.3 when late static binding was introduced. What I want to know is how do I reference self when calling a function from a parent class. For example these two methods were written for a User class which is a child of DatabaseObject. Right now they're sitting inside the User class, but, as they're used in other child classes of DatabaseObject I'd like to promote them to be included inside DatabaseObject. public static function find_all() { global $database; $result_set = self::find_by_sql("select * from ".self::$table_name); return $result_set; } and: protected function cleaned_attributes() { global $database; $clean_attributes = array(); foreach($this->attributes() as $key => $value) { $clean_attributes[$key] = $database->escape_value($value); } return $clean_attributes; } So I have three questions: 1) How do I change the self:: reference when I move it to the parent. Is it static:: or something similar? 2) When calling the function from my code do I call it in the same way, as a function of the child class eg User::find_all() or is there a change there also? 3) Is there anything else I need to know before I start chopping bits up?

  Read the article

• Delphi 6 OleServer.pas Invoke memory leak

  - by Mike Davis

  There's a bug in delphi 6 which you can find some reference online for when you import a tlb the order of the parameters in an event invocation is reversed. It is reversed once in the imported header and once in TServerEventDIspatch.Invoke. you can find more information about it here: http://cc.embarcadero.com/Item/16496 somewhat related to this issue there appears to be a memory leak in TServerEventDispatch.Invoke with a parameter of a Variant of type Var_Array (maybe others, but this is the more obvious one i could see). The invoke code copies the args into a VarArray to be passed to the event handler and then copies the VarArray back to the args after the call, relevant code pasted below: // Set our array to appropriate length SetLength(VarArray, ParamCount); // Copy over data for I := Low(VarArray) to High(VarArray) do VarArray[I] := OleVariant(TDispParams(Params).rgvarg^[I]); // Invoke Server proxy class if FServer <> nil then FServer.InvokeEvent(DispID, VarArray); // Copy data back for I := Low(VarArray) to High(VarArray) do OleVariant(TDispParams(Params).rgvarg^[I]) := VarArray[I]; // Clean array SetLength(VarArray, 0); There are some obvious work-arounds in my case: if i skip the copying back in case of a VarArray parameter it fixes the leak. to not change the functionality i thought i should copy the data in the array instead of the variant back to the params but that can get complicated since it can hold other variants and seems to me that would need to be done recursively. Since a change in OleServer will have a ripple effect i want to make sure my change here is strictly correct. can anyone shed some light on exactly why memory is being leaked here? I can't seem to look up the callstack any lower than TServerEventDIspatch.Invoke (why is that?) I imagine that in the process of copying the Variant holding the VarArray back to the param list it added a reference to the array thus not allowing it to be release as normal but that's just a rough guess and i can't track down the code to back it up. Maybe someone with a better understanding of all this could shed some light?

  Read the article

• Problems with reading into buffer using boost::asio::async_read

  - by Max

  Good day. I have a Types.hpp file in my project. And within it i have: .... namespace RC { ..... ..... struct ViewSettings { .... }; ..... } In the Server.cpp file I'm including this Types.hpp file, and i have there: class Session { ..... RC::ViewSettings tmp; boost::asio::async_read(socket_, boost::asio::buffer(&tmp, sizeof(RC::ViewSettings)), boost::bind(&Session::Finish_Reading_Data, shared_from_this(), boost::asio::placeholders::error)); ..... } And during the compilation i have an errors: error C2825: 'F': must be a class or namespace when followed by '::' : see reference to class template instantiation 'boost::_bi::result_traits<R,F>' being compiled with [ R=boost::_bi::unspecified, F=void (__thiscall Session::* )(void) ] : see reference to class template instantiation 'boost::_bi::bind_t<R,F,L>' being compiled with [ R=boost::_bi::unspecified, F=void (__thiscall Session::* )(void), L=boost::_bi::list2<boost::_bi::value<boost::shared_ptr<Session>>,boost::arg<1>> ] error C2039: 'result_type' : is not a member of '`global namespace'' And the code like this works in proper way: int w; boost::asio::async_read(socket_, boost::asio::buffer(&w, sizeof(int)), boost::bind(&Session::Handle_Read_Width, shared_from_this(), boost::asio::placeholders::error)); Please, help. What's the problem here? Thanks in advance.

  Read the article

• Can I ignore a SIGFPE resulting from division by zero?

  - by Mikeage

  I have a program which deliberately performs a divide by zero (and stores the result in a volatile variable) in order to halt in certain circumstances. However, I'd like to be able to disable this halting, without changing the macro that performs the division by zero. Is there any way to ignore it? I've tried using #include <signal.h> ... int main(void) { signal(SIGFPE, SIG_IGN); ... } but it still dies with the message "Floating point exception (core dumped)". I don't actually use the value, so I don't really care what's assigned to the variable; 0, random, undefined... EDIT: I know this is not the most portable, but it's intended for an embedded device which runs on many different OSes. The default halt action is to divide by zero; other platforms require different tricks to force a watchdog induced reboot (such as an infinite loop with interrupts disabled). For a PC (linux) test environment, I wanted to disable the halt on division by zero without relying on things like assert.

  Read the article

• System.Design cannot be referenced in Class Library?

  - by Alex Yeung

  Hi all, I have a very strange problem that I cannot fix and don't know what's going on... I am using VS 2010 Premium and .NET 4.0. Here are my steps to simulate the problem. Step 1. Create a new VB class library project named "MyClassLib" Step 2. Create a new class named "MyTestingClass". Public Class MyTestingClass Inherits System.ComponentModel.Design.CollectionEditor Public Sub New() MyBase.New(GetType(List(Of String))) End Sub End Class Step 3. Add two .net reference. "System.Design" and "System.Drawing". Step 4. Create a new VB console application named "MyClassExe" Step 5. Add "MyClassLib" reference to "MyClassExe". Step 6. Open Module1.vb in "MyClassExe" project Step 7. In the Main method, type Dim a = New MyClassLib.MyTestingClass() Step 8. Try to compile "MyClassLib". It doesn't have problem. Step 9. Try to compile "MyClassExe". It cannot compile because the WHOLE MyClassLib cannot be found!!! I have no idea what's going on? Moreover, the same case happens in C#. Does anyone know what's the problem with "System.Design"? Thank!!!

  Read the article

• Django aggregate query generating SQL error

  - by meepmeep

  I'm using Django 1.1.1 on a SQL Server 2005 db using the latest sqlserver_ado library. models.py includes: class Project(models.Model): name = models.CharField(max_length=50) class Thing(models.Model): project = models.ForeignKey(Project) reference = models.CharField(max_length=50) class ThingMonth(models.Model): thing = models.ForeignKey(Thing) timestamp = models.DateTimeField() ThingMonthValue = models.FloatField() class Meta: db_table = u'ThingMonthSummary' In a view, I have retrieved a queryset called 'things' which contains 25 Things: things = Thing.objects.select_related().filter(project=1).order_by('reference') I then want to do an aggregate query to get the average ThingMonthValue for the first 20 of those Things for a certain period, and the same value for the last 5. For the first 20 I do: averageThingMonthValue = ThingMonth.objects.filter(turbine__in=things[:20],timestamp__range="2009-01-01 00:00","2010-03-00:00")).aggregate(Avg('ThingMonthValue'))['ThingMonthValue__avg'] This works fine, and returns the desired value. For the last 5 I do: averageThingMonthValue = ThingMonth.objects.filter(turbine__in=things[20:],timestamp__range="2009-01-01 00:00","2010-03-00:00")).aggregate(Avg('ThingMonthValue'))['ThingMonthValue__avg'] But for this I get an SQL error: 'Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.' The SQL query being used by django reads: SELECT AVG([ThingMonthSummary].[ThingMonthValue]) AS [ThingMonthValue__avg] FROM [ThingMonthSummary] WHERE ([ThingMonthSummary].[thing_id] IN (SELECT _row_num, [id] FROM ( SELECT ROW_NUMBER() OVER ( ORDER BY [AAAA].[id] ASC) as _row_num, [AAAA].[id] FROM ( SELECT U0.[id] FROM [Thing] U0 WHERE U0.[project_id] = 1 ) AS [AAAA]) as QQQ where 20 < _row_num) AND [ThingMonthSummary].[timestamp] BETWEEN '01/01/09 00:00:00' and '03/01/10 00:00:00') Any idea why it works for one slice of the Things and not the second? I've checked and the two slices do contain the desired Things correctly.

  Read the article

• Handling Errors in PHP

  - by Mike

  I have a custom class that, when called, will redirect to a page and send a 'message_type' and 'message' variable via GET. When the page opens it checks for these variables and displays a 'success', 'warning', or 'error' message depending on the 'message_type' variable. I made it so the user thinks they stay on the same page. It also allows for other variables to be passed along with the message. Is this good practice, or should I just start using exceptions? Example: //Call a static function that will redirect to a page, with an error message RedirectWithMessage::go('somepage.php', MessageType::ERROR, 'Error message here.'); The following checkMessage() function is an include file: function checkMessage() { if((isset($_GET['message_type']) && strlen($_GET['message_type'])) && (isset($_GET['message']) && strlen($_GET['message_type']))) { DisplayMessage::display($_GET['message_type'], $_GET['message']); return true; } return false; } On the page that is redirected to, call checkMessage(); //If a message is received, display it. If not, do nothing checkMessage(); I know this might be vague, and I can supply more code if necessary. I guess the issue is that I don't have much experience using exceptions, but I think they seem cumbersome (writing try-catch blocks everywhere). Please let me know if I am making this more difficult for myself or if there is a better solution. Thanks! Mike

  Read the article

• Trouble compiling C/C++ project in NetBeans 6.8 with MinGW on Windows

  - by dontoo

  I am learning C and because VC++ 2008 doesn't support C99 features I have just installed NetBeans and configure it to work with MinGW. I can compile single file project ( main.c) and use debugger but when I add new file to project I get error "undefined reference to ... function(code) in that file..". Obviously MinGW does't link my files or I don't know how properly add them to my project (c standard library files work fine). /bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf make[1]: Entering directory `/c/Users/don/Documents/NetBeansProjects/CppApplication_7' /bin/make -f nbproject/Makefile-Debug.mk dist/Debug/MinGW-Windows/cppapplication_7.exe make[2]: Entering directory `/c/Users/don/Documents/NetBeansProjects/CppApplication_7' mkdir -p dist/Debug/MinGW-Windows gcc.exe -o dist/Debug/MinGW-Windows/cppapplication_7 build/Debug/MinGW-Windows/main.o build/Debug/MinGW-Windows/main.o: In function `main': C:/Users/don/Documents/NetBeansProjects/CppApplication_7/main.c:5: undefined reference to `X' collect2: ld returned 1 exit status make[2]: *** [dist/Debug/MinGW-Windows/cppapplication_7.exe] Error 1 make[2]: Leaving directory `/c/Users/don/Documents/NetBeansProjects/CppApplication_7' make[1]: *** [.build-conf] Error 2 make[1]: Leaving directory `/c/Users/don/Documents/NetBeansProjects/CppApplication_7' make: *** [.build-impl] Error 2 BUILD FAILED (exit value 2, total time: 1s) main.c #include "header.h" int main(int argc, char** argv) { X(); return (EXIT_SUCCESS); } header.h #ifndef _HEADER_H #define _HEADER_H #include <stdio.h> #include <stdlib.h> void X(void); #endif source.c #include "header.h" void X(void) { printf("dsfdas"); }

  Read the article

• Using variables inside macros in SQL

  - by Tim

  Hello I'm wanting to use variables inside my macro SQL on Teradata. I thought I could do something like the following: REPLACE MACRO DbName.MyMacro ( MacroNm VARCHAR(50) ) AS ( /* Variable to store last time the macro was run */ DECLARE V_LAST_RUN_DATE TIMESTAMP; /* Get last run date and store in V_LAST_RUN_DATE */ SELECT LastDate INTO V_LAST_RUN_DATE FROM DbName.RunLog WHERE MacroNm = :MacroNm; /* Update the last run date to now and save the old date in history */ EXECUTE MACRO DbName.RunLogUpdater( :MacroNm ,V_LAST_RUN_DATE ,CURRENT_TIMESTAMP ); ); However, that didn't work, so I thought of this instead: REPLACE MACRO DbName.MyMacro ( MacroNm VARCHAR(50) ) AS ( /* Variable to store last time the macro was run */ CREATE VOLATILE TABLE MacroVars AS ( SELECT LastDate AS V_LAST_RUN_DATE FROM DbName.RunLog WHERE MacroNm = :MacroNm; ) WITH DATA ON COMMIT PRESERVE ROWS; /* Update the last run date to now and save the old date in history */ EXECUTE MACRO DbName.RunLogUpdater( :MacroNm ,SELECT V_LAST_RUN_DATE FROM MacroVars ,CURRENT_TIMESTAMP ); ); I can do what I'm looking for with a Stored Procedure, however I want to avoid for performance. Do you have any ideas about this? Is there anything else I can try? Cheers Tim

  Read the article

• rpy2: Converting a data.frame to a numpy array

  - by Mike Dewar

  I have a data.frame in R. It contains a lot of data : gene expression levels from many (125) arrays. I'd like the data in Python, due mostly to my incompetence in R and the fact that this was supposed to be a 30 minute job. I would like the following code to work. To understand this code, know that the variable path contains the full path to my data set which, when loaded, gives me a variable called immgen. Know that immgen is an object (a Bioconductor ExpressionSet object) and that exprs(immgen) returns a data frame with 125 columns (experiments) and tens of thousands of rows (named genes). robjects.r("load('%s')"%path) # loads immgen e = robjects.r['data.frame']("exprs(immgen)") expression_data = np.array(e) This code runs, but expression_data is simply array([[1]]). I'm pretty sure that e doesn't represent the data frame generated by exprs() due to things like: In [40]: e._get_ncol() Out[40]: 1 In [41]: e._get_nrow() Out[41]: 1 But then again who knows? Even if e did represent my data.frame, that it doesn't convert straight to an array would be fair enough - a data frame has more in it than an array (rownames and colnames) and so maybe life shouldn't be this easy. However I still can't work out how to perform the conversion. The documentation is a bit too terse for me, though my limited understanding of the headings in the docs implies that this should be possible. Anyone any thoughts?

  Read the article

• subtotals in columns usind reshape2 in R

  - by user1043144

  I have spent some time now learning RESHAPE2 and plyr but I still do not get it. This time I have a problem with (a) subtotals and (b) passing different aggregate functions . Here an example using data from the excellent tutorial on the blog of mrdwab http://news.mrdwab.com/ # libraries library(plyr) library(reshape2) # get data and add few more variables book.sales = read.csv("http://news.mrdwab.com/data-booksales") book.sales$Stock = book.sales$Quantity + 10 book.sales$SubjCat[(book.sales$Subject == 'Economics') | (book.sales$Subject == 'Management') ] <- '1_EconSciences' book.sales$SubjCat[book.sales$Subject %in% c('Anthropology', 'Politics', 'Sociology') ] <- '2_SocSciences' book.sales$SubjCat[book.sales$Subject %in% c('Communication', 'Fiction', 'History', 'Research', 'Statistics') ] <- '3_other' # to get to my starting dataframe (close to the project I am working on) book.sales1 <- ddply(book.sales, c('Region', 'Representative', 'SubjCat', 'Subject', 'Publisher'), summarize, Stock = sum(Stock), Sold = sum(Quantity), Ratio = round((100 * sum(Quantity)/ sum(Stock)), digits = 1)) #melt it m.book.sales = melt(data = book.sales1, id.vars = c('Region', 'Representative', 'SubjCat', 'Subject', 'Publisher'), measured.vars = c('Stock', 'Sold', 'Ratio')) # cast it Tab1 <- dcast(data = m.book.sales, formula = Region + Representative ~ Publisher + variable, fun.aggregate = sum, margins = c('Region', 'Representative')) Now my questions : I have been able to add the subtotals in rows. But is it possible also to add margins in the columns. Say for example, Totals of Stock for one Publisher ? Sorry I meant to say example total sold for all publishers There is a problem with the columns with “ratio”. How can I get “mean” instead of “sum” for this variable ? P.S: I have seen some examples using reshape. Will you recommend to use it instead of reshape2 (which seems not to include the functionalities of two functions).

  Read the article

• Trying to modify the text of a document onkeydown is inserting text incorrectly.

  - by Benny

  I have the following html: <html> <head> <script> function myKeyDown() { var myDiv = document.getElementById('myDiv'); myDiv.innerHTML = myDiv.innerHTML.replace(/(@[a-z0-9_]+)/gi, '<strong>$1</strong>'); } function init() { document.addEventListener('keydown', myKeyDown, false); document.designMode = "on"; } window.onload = init; </script> </head> <body> <div id="myDiv"> This is my variable name: @varname. If I type here things go wrong... </div> </body> </html> My goal is to do a kind of syntax highlighting on edit, to highlight variable names that begin with an @ symbol. However, when I edit the document's body, the function runs but the cursor is automatically shifted to the beginning of the body before the keystroke is performed. My hypothesis is that the keypress event is trying to insert the new character at a specified index, but when I run the replace function the indices get messed up so it defaults the character insertion point to the beginning. I'm using Firefox to test by the way. Any help would be appreciated. Thanks, B.J.

  Read the article

• TFS Solution build cascading to several other builds even when common components were not modified

  - by Bob Palmer

  Hey all, here is the issue I am currently trying to work through. We are using Team Foundation Server 2008, and utilizing the automated build support out of the box. We have one very large project that encompasses a number of interrelated components and web sites, each of which is set up as a Visual Studio solution file. Many of these solutions are highly interrelated since they may contain applications, or contain common libraries or shared components. We have roughly 20 or so applications, three large web sites, and about 20 components. Each solution may include projects from other solutions. For example, a solution for a console app would also include the project files for all of the components it utilizes, since we need to ensure that when someone changes a component and rebuilds it, it is reflected in all of the projects that consume that component, and we can make sure nothing was broken. We have build projects for each solution, whether that's an application, component, or web site. For this example, we will call them solutions 01, 02, and 03. These reference multiple projects (both their own core project and test projects, plus the projects relating to various components). Solution 01 has projects A, B, and C. Solution 02 has projects C, D, and E. Solution 03 has projects E, F, and G. Now, for the problem. If I modify project A, the system will end up rebuilding all three solutions. Worse, all thirty solutions reference common projects used for data access (let's call it project H). Because they all share one project in common, if I modify any solution in my stack, even if it does not touch project H, I still end up kicking off every single build script. Any thoughts on how to address this? Ideally I would only want to kick off builds where their constituant projects were directly modified - i.e in the example below, if I modified project C, I would only rebuild solutions 01 and 02. Thanks!

  Read the article

• How do i close the alert dialog that displays custom view

  - by Asdfg

  I have an activity named MainActivity which has a button. On click of that button i am displaying an AlertDialog which contains a custom view named ChildWindow.xml. That custom view has multiple textboxes and a OK button. On click of the OK button, i am calling a method of MainActivity. I am able to access the ChildWindow here as view.getRootView().findViewById(R.id.txtFirstName); Once the user clicks on the OK button, i have to close the alert dialog which i am able to do as view.getRootView().setVisibility(View.GONE); My problem is even though i have closed the the ChildWindow in the above statement, i am able to get reference to the textbox in the next line which means AlertDialog is closed but child window is still there. This is how the OK button click looks like: This works as expected: EditText tb = (EditText) view.getRootView().findViewById(R.id.txtFirstName); Toast toast = Toast.makeText(getApplicationContext(), tb.getText(), Toast.LENGTH_LONG); toast.show(); view.getRootView().setVisibility(View.GONE); This should not work as i am closing the alert dialog and then getting the reference of the textbox but this works too. view.getRootView().setVisibility(View.GONE); EditText tb = (EditText) view.getRootView().findViewById(R.id.txtFirstName); Toast toast = Toast.makeText(getApplicationContext(), tb.getText(), Toast.LENGTH_LONG); toast.show(); I think i am closing the alert dialog but i am not destroying it from the memory. Can someone point me out what am i missing here?

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >