Search Results

Search found 16987 results on 680 pages for 'second'.

Page 298/680 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• Dual booted Windows 7 freezes after login screen

  - by Cathal

  First-time Linux user, using a Packard Bell Easy Note TS laptop. My problem arose after I dual boot installed Ubuntu 12.04 on Windows 7 via WUBI. I backed up all my data, and reinstalled Windows from factory settings on the recovery partition. When I first tried to install Ubuntu I mistakenly closed the lid at the start of the installation, stopping it. After that I rebooted, and my second installation attempt went without a hitch. Ubuntu works perfectly, the data on the partitions seem to be fine. My problem is I can't log back in to Windows 7. After selecting it in GRUB, and then in the Windows 7/ WUBI choice on boot, it loads up perfectly til the user log in screen. After the password is inputted, it stalls on the "Welcome" busy screen. This happens in Safe mode as well. Startup repair can't find a problem and neither can CHKDSK. System restore and Last known good config have no effect either. If anyone could help me out, I'd be real grateful. edit in response to the question below, since I don't know how to comment: Windows was installed first and its partitions are the first on the list. Should I move the windows partitions to after the Linux ones on the disk? Thanks for your help.

  Read the article

• Hyperlink to doc file slow opening

  - by mserioli

  I've two excel file with inside some link to .doc and .pdf file. Both excel files and linked files are on a network shared folder. The first excel file is an .xls, the second an .xlsm. While opening link to .pdf file is very fast (the file is open in few seconds) it take a long time to open .doc files (about 40 secs.). I have searched on internet but found no solution at the moment. I have this problem with both excel 2007 and 2010. Does anyone know how to solve this problem? Thanks a lot Marco

  Read the article

• Is it usual if my employer asks me to get MCP certificates for higher salary?

  - by Vimvq1987

  I just got a salary negotiation this morning (I passed three interviews last 3 weeks), and it was like a game. I was stubborn with my expectation, or that number, or I leave. OK, to be honest, it's not about money, but I, a not-very-experienced developer, want to see how much the employer pays me, and it was fun. And at last, my employer gave me this: "OK, * $, but with two conditions, first, you get your spoken skill improved (English is not my native), and second, you got MCPs before the end of the year". He asked me to get 3 MCP certificates. The company will buy any books that necessary to the exam, but I must read them at free time, take and pass the exams . If I not get them, my employer will not kick me out, but, salary discussion will be harder, for me. I accepted that offer, I thought it's good enough. But I wonder, is it usual? If you're an employer, have you ever given that offer to a candidate? If you're an employee, have you ever got, or will you accept an offer like that?

  Read the article

• Why does Unity not extend to my 2nd monitor, even when it is displaying an X-Screen?

  - by Gridwalker

  I recently added a 2nd video card to my system, but unity refuses to extend my desktop over to the second screen. Although the secondary monitor initialises when I boot and I can move the mouse cursor over to the 2nd screen, the screen is otherwise blank (showing no wallpaper or interface elements) and I am unable to move any windows to this monitor. Moving the mouse cursor over to the 2nd monitor changes it from the default cursor to the old-style X cursor, such as the one that appears when you run X-kill, indicating that this screen is initialised in the X Server but that Unity is not recognising it. Although the Nvidia X Server Settings application can see both monitors, the unity systems settings application does not detect the 2nd adapter. Sometimes the additional drivers application can see both adapters, but it doesn't consistently show options for them both. Xrandr also fails to detect the 2nd monitor, but iNex lists both adapters. I have experimented with several different drivers for each adapter and with setting each of the graphics cards as the primary adapter in the BIOS, but this has made little difference. The two adapters are an onboard Geforce 8200 and a PCIE Geforce 7200 GX. The onboard adapter is currently set as the primary, however this adapter crashes whenever I use the Nouveau driver and I have to switch over to the PCIE as a primary whenever I purge the proprietary drivers (switching back when the 304 driver has been reinstalled). It doesn't matter which adapter I set as my primary, the results are the same : one screen showing the unity interface and one screen showing an X-Screen that only displays the mouse cursor. All I want is to be able to run this system in a dual screen configuration. I am not a gamer, nor do I require 3D rendering capabilities. Anything you can suggest to get the desktop to extend across both screens will be massively appreciated!

  Read the article

• Help with OpenVPN setup on Windows Server 2003

  - by Bill Johnson

  Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

  Read the article

• Imagemagick apparently correctly configured, still won't work under IIS 7.5 + PHP 5.3.2

  - by Razor

  I have managed to get imagemagick working (tested using the command line example on their website) It also appears that the php extension is correctly installed: I can see it listed in my phpinfo(); list. However, when I try to run the following code: $im = new imagick( 'examples.jpg' ); $im->thumbnailImage( 200, 0); $im->writeImage( 'a_thumbnail.jpg' ); The execution stops at the second line, because it cannot find the thumbnailImage method. What I can think of is that some user doesn't have enough privileges to access/run something else, but I obviously cannot give user access to everything. Another possibility is that the PHP extension I'm using is not the suitable one for the latest imagemagick distribution.

  Read the article

• Grails project structure

  - by Martin Janicek

  Good news everyone! I've changed the structure of the Grails project as requested in the issue 160028 and it should be much more user friendly than before. There are actually two things I've fixed/implemented. First of all the source folders are finally represented in the same way as for the Java projects (which means instead of the folder based structure it uses package based structure). The difference can be seen on pictures bellow:    Folder based structure:                                                 Package based structure: Second, minor and quite related change could be seen on those pictures too. There are different icons for different structures. For example Views and Layouts items are folder based, Domain Classes are package based and so on.

  Read the article

• Purpose oriented user accounts on a single desktop?

  - by dd_dent

  Starting point: I currently do development for Dynamics Ax, Android and an occasional dabble with Wordpress and Python. Soon, I'll start a project involving setting up WP on Google Apps Engine. Everything is, and should continue to, run from the same PC (running Linux Mint). Issue: I'm afraid of botching/bogging down my setup due to tinkering/installing multiple runtimes/IDE's/SDK's/Services, so I was thinking of using multiple users, each purposed to handle the task at hand (web, Android etc) and making each user as inert as possible to one another. What I need to know is the following: Is this a good/feasible practice? The second closest thing to this using remote desktops connections, either to computers or to VM's, which I'd rather avoid. What about switching users? Can it be made seamless? Anything else I should know? Update and clarification regarding VM's and whatnot: The reason I wish to avoid resorting to VM's is that I dislike the performance impact and sluggishness associated with it. I also suspect it might add a layer of complexity I wish to avoid. This answer by Wyatt is interesting but I think it's only partly suited for requirements (web development for example). Also, in reference to the point made about system wide installs, there is a level compromise I should accept as experessed by this for example. This option suggested by 9000 is also enticing (more than VM's actually) and by no means do I intend to "Juggle" JVMs and whatnot, partly due to the reason mentioned before. Regarding complexity, I agree and would consider what was said, only from my experience I tend to pollute my work environment with SDKs and runtimes I tried and discarded, which would occasionally leave leftovers which cause issues throught the session. What I really want is a set of well defined, non virtualized sessions from which I can choose at my leisure and be mostly (to a reasonable extent) safe from affecting each session from the other. And what I'm really asking is if and how can this be done using user accounts.

  Read the article

• quick check of open port

  - by shantanuo

  The following is working as expected. (do not want to use nmap) I need to use nc (or any other built-in centOS) command in shell script to check the port 6379 of a remote server. I want the script to exit quickly if no response received in less than 1 second. But it seems that nc will wait for too long before quitting with exit code of 1 How do I "quickly" check if the port is listening? # time nc -z 1.2.3.4 1234 real 0m21.001s user 0m0.000s sys 0m0.000s # echo $? 1 # time nc -z 1.2.3.4 6379 Connection to 1.2.3.4 6379 port [tcp/*] succeeded! real 0m0.272s user 0m0.000s sys 0m0.008s # echo $? 0

  Read the article

• If you develop on multiple operating systems, is it better to have multiple computers + displays?

  - by dan

  I develop for iOS and Linux. My preferred OS is Ubuntu. Now my software shop (me and a partner) is developing for Windows too. Now the question is, is it more efficient to have multiple workstations, one for each target OS? Efficiency and productivity is a higher priority than saving money. I have a 3.4Ghz i7 desktop workstation running Ubuntu and virtualized Windows with two displays, and I'm putting together an even more powerful i7 Hackintosh with 16GB RAM (to replace my weak 2.2Ghz i5 Macbook Pro). My specific dilemma is whether I should sell the first computer and triple boot on the second one, or buy two more displays and run both desktop systems simultaneously. Would appreciate answers from developers who write software for multiple OSes. Running guest OSes in VirtualBox on one system not ideal, because in my experience performance is seriously degraded under virtualization. So the choice is between dual/triple booting on one system vs having two systems, one for OSX+iOS/Windows (dual boot) and the other for Ubuntu (which I prefer to use as my main OS). For much of our work, I write a server-side application in Linux and a client for iOS (or for Windows or OS X) simultaneously.

  Read the article

• A simple example of movement prediction

  - by Daniel

  I've seen lots of examples of theory about the reason for client-side prediction, but I'm having a hard time converting it into code. I was wondering if someone knows of some specific examples that share some of the code, or can share their knowledge to shed some light into my situation. I'm trying to run some tests to get a the movement going (smoothly) between multiple clients. I'm using mouse input to initiate movement. I'm using AS3 and C# on a local Player.IO server. Right now I'm trying to get the Client side working, as I'm only forwarding position info with the client. I have 2 timers, one is an onEnterFrame and the other is a 100ms Timer, and one on mouseClick listener. When I click anywhere with a mouse, I update my player class to give it a destination point On every enterFrame Event for the player, it moves towards the destination point At every 100ms it sends a message to the server with the position of where it should be in a 100ms. The distance traveled is calculated by taking the distance (in Pixels) that the player can travel in one second, and dividing it by the framerate for the onEnterFrame handler, and by the update frequency (1/0.100s) for the server update. For the other Players, the location is interpolated and animated on every frame based on the new location. Is this the right way of doing it?

  Read the article

• JavaApplicationStub Compatibility with all java versions

  - by neelamsharma

  Hi, I am running a Java application on Mac Leopard & on Mac Mini. My Mac Mini upgraded, it is using Java Version 1.6.0_17 and Mac Leopard have version 1.5.0_13. To run that application on Mac Mini I have to copy JavaApplicationStub from path -"/System/Library/Frameworks/JavaVM.framework/Resources/MacOS/JavaApplicationStub" to my application "Content/Resources/Java". But this application successfully run on Mac Leopard. If I do not copy stub at Mac Mini then I am unable to launch application using app by double click, it shows icon for few second then disappears, so in that case I have to run application with its jar. I want that without copying explicitly JavaApplicationStub, how can I run app with all versions of java. If this possible then what changes I have to made? The info.plist file contain JVMVersion is 1.4+. Thanks!

  Read the article

• rsync does't work

  - by jspooner

  I set up a new ec2 ubuntu server and I'm unable to use rsync to push a file up. I can ssh to the machine with my keypair. I'm not sure why this looks like it works but finishes in half a second and there is nothing in /home/ubuntu on the server. ? ~ rsync -av -i ~/.ec2/my-keypair ~/Downloads/pushcom.2012-06-26T01-10-04.gz [email protected] building file list ... done >f..t.... gsg-keypair >f..t.... pushwoodcom.2012-06-26T01-10-04.gz sent 3624 bytes received 64 bytes 7376.00 bytes/sec total size is 3392 speedup is 0.92 I've tried 50 different ways of the rsync command but I can't get anything to work. Please help! Thanks

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• Okular (on Ubuntu 9.10) prints multiple pages per sheet (n-up) very small

  - by dgleich

  I'm trying to print a set of beamer slides with multiple slides per page (4-up or 6-up). When I select 4 pages or 6 pages per sheet in the Okular print dialog, the pages print quite small (perhaps even tiny -- about 1.75" by 1.25") and leave significant white-space on the page. I can get around this behavior by using the pdfnup utility (in the pdfjam package); which will correctly generate a 4- or 6-up pdf file but it's annoying to generate a second pdf file when I should be able to accomplish this task from the print dialog. Details: Ubuntu 9.10 (Karmic), 64-bit, Color Postscript printer.

  Read the article

• How to use symbolic links in windows server 2008R2 across the network (mklink)

  - by server info

  I have One Server (Srv1) which holds data with file shares and the storage is full. Now I have second Server (Srv2) which has alot more space. No I would like to transfer all the data von Serv1 to Serv2 and have links to the new destination. I found mklink very useful here but unfortunately it does not work over the network. Which also points the docu out. People heavily rely on the path's so it would be helpful if somone has a pointer for me... how to handle symbolic links a cross the network with Windows Servers. I am running Windows Server 2008. Thanks for any help

  Read the article

• Can't copy Ilias-folder via FQDN, but via ip-address?

  - by Lars

  I have an Ilias-Installation, which is available through two virtual hosts: the FQDN and the ip-address. The first server is ssl only, the second plain http. Both configuration files look the same except for the SSL-part: SSLEngine on SSLCertificateFile /etc/apache2/ssl/ilias.pem In the Ilias-Webinterface, I can copy a folder on the plain http. But if I try to copy the same folder on the ssl virtual host, I get the notice, that the copy was started (rough german translation here), but the folder does not show up. There are no errors in the error-logs of php or the webserver and as said, no differences beside the ssl-part. The guys at an ilias-forum did not have an idea, either. Any ideas in here?

  Read the article

• Malzilla Tutorial #4 - how to get it working

  - by Sim

  I am trying to understand the basic work flow of using Malzilla , and therefore doing the tutorials. But already in the first one, where you actually get to do something I am lost as it doesn't work for me at all, even though I follow it step by step. In the first paragraph where you have to concatenate the string and then translate it using the MiscDecoders->DecodeUCS2, I am getting not printable chars as a solution, after concatenating and using the decoder. In the second paragraph where you are told to run the script after adding the function-call at the bottom of the script, the Decoder tells me that he cannot handle the arguments.callee.toString() method and therefor wont run the script. How outdated are those tutorials and how can I get them to work?

  Read the article

• Reducing Loading of Advertisers Scripts

  - by HollerTrain

  I have a website (http://dev2.liquor.com) that loads very quickly when I remove the advertisers and tracking scripts our partners give us. Of course we need to reduce page load time from 6 seconds to 1 second, and I see that it is 100% all of our external js files for partner tracking, ads, etc. I have been banging my head against the wall trying to find alternate ways to load/compress/serve the multidue of js the user needs to download. I can easily compress/minify mine, but someone else's that is not on our server is becoming hard to do so. The best I can do is get a C on YSlow, and each suggestion they give me pertains to my stupid tracking js scripts! Any help would be greatly appreciated.

  Read the article

• Moving FederatedEmail/SystemMailbox from One Store to Another - Exchange 2010

  - by ThaKidd

  Hello all. Just upgraded from Exchange 2003 to 2010. Somehow, I have two mailbox databases on my single Exchange 2010 server. One database contains all of the mailboxes I had moved from the 2003 exchange server; the other contains two SystemMailboxes and one FederatedEmail box. I am just starting to get a grasp on the commands used in the EMS. I was wondering if someone could point me in the right direction to move these three "system" mailboxes into my actual mailbox database so I can eliminate the second database. Just trying to sure up this one server before I role out my backup Exchange server. Thanks in advance! Your help and ideas are greatly appreciated as I try to make this setup as simple as possible.

  Read the article

• Problem with missing JSON functions on PHP 5.2.6 / Plesk 8.4

  - by Drachenviech

  I have a vserver running openSuse 10.3, Apache 2 and Plesk 8.4. I can update/upgrade neither, as it is apparently not recommended to upgrade openSuse 10.3 (and an update to the EOL 10.4 does not seem to make much sense) and Plesk fails to update no matter what version I try (even fails to upgrade to 8.4.1). Still I can live with that somehow, primarily because I don’t have the time to do a fresh remote install on the vserver. What really is a problem is, that though the installed PHP is 5.2.6 it has no zip library and no json functions. The first is probably because PHP was not compiled with --enable-zip. The second is a big mystery though. As I understand it, it always comes with PHP unless its compiled with the --disable-json configure option. This is however not the case. And the json extension module is just not there. I even tried to enable it with extension=json.so with no luck either. the configure options of my PHP are (as shipped with Plesk 8.4) '../configure' '--prefix=/usr' '--datadir=/usr/share/php5' '--mandir=/usr/share/man' '--bindir=/usr/bin' '--with-libdir=lib' '--includedir=/usr/include' '--sysconfdir=/etc/php5/apache2' '--with-config-file-path=/etc/php5/apache2' '--with-config-file-scan-dir=/etc/php5/conf.d' '--enable-libxml' '--enable-session' '--with-mm' '--with-pcre-regex=/usr' '--enable-xml' '--enable-simplexml' '--enable-spl' '--enable-filter' '--disable-debug' '--enable-inline-optimization' '--disable-rpath' '--disable-static' '--enable-shared' '--program-suffix=5' '--with-pic' '--with-gnu-ld' '--with-system-tzdata=/usr/share/zoneinfo' '--with-apxs2=/usr/sbin/apxs2' '--disable-all' '--disable-cli' As I understand it, PECL is not an option with 5.2.6. Or am I mistaken? Even if I was not, the openSuse repository only goes as far as PHP 5.2.4. The openSuse install even came without zypper, which I had to manually install. So is there a way to get ziplib and json running in PHP 5.2.6 without having to recompile the binary?

  Read the article

• Outlook 2010 sharing calendars and updating

  - by Stef

  We recently purchased Outlook 2010 for our law firm. We have several secretaries that need to view all calendars and input information in each of them. We do not have Exchange. I did a test by creating a calendar on one computer and sharing it with another computer. On the second computer I created a calendar and shared it with the first computer. Everything seems to work, except when I put events on computer 1 calendar and look at computer 1 calendar on computer 2. I can not see anything. Any advice would help. Thanks

  Read the article

• That Tool is cURLy

  When you just use IE, Firefox or Chrome it can be easy to forget that HTTP is about more then just going to check the latest tech news at Engadget. It is a full and rich protocol, and a great way to experience that richness is the powerful command line utility cURL. cURL has a lot of options, but the syntax starts out simple. You can retrieve the contents of a web page with a simple curl http://blogs.claritycon.com/. The results should be the full text of the web page, tags and all. From there, you can use X to specify the HTTP verb to use, POST, PUT, DELETE, PATCH, etc and d to specify the payload of a POST or PUT. I have found cURL to be incredibly useful for two scenarios. First, as a good way to test basic web services. Second, while working a bit with CouchDB and another document based database, cURL has helped me learn more about RESTful APIs, including different verbs and response codes. cURL is a mainstay in our environments and programming languages precisely because it is simple, powerful and discoverable. I encourage more .NET developers to take a look, bask on the command line for a while and enjoy the plain text of the web. And this excellent logo:     -- Relevant Links -- Its not always the case with manuals, but the manual for cURL is quite useful: http://curl.haxx.se/docs/manual.html To make your command line look a little nicer (and more powerful) on Windows, check out Console and add some transparency effects: http://sourceforge.net/projects/console/Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Maintaining Two Separate Software Versions From the Same Codebase in Version Control

  - by Joseph

  Let's say that I am writing two different versions of the same software/program/app/script and storing them under version control. The first version is a free "Basic" version, while the second is a paid "Premium" version that takes the codebase of the free version and expands upon it with a few extra value-added features. Any new patches, fixes, or features need to find their way into both versions. I am currently considering using master and develop branches for the main codebase (free version) along side master-premium and develop-premium branches for the paid version. When a change is made to the free version and merged to the master branch (after thorough testing on develop of course), it gets copied over to the develop-premium branch via the cherry-pick command for more testing and then merged into master-premium. Is this the best workflow to handle this situation? Are there any potential problems, caveats, or pitfalls to be aware of? Is there a better branching strategy than what I have already come up with? Your feedback is highly appreciated! P.S. This is for a PHP script stored in Git, but the answers should apply to any language or VCS.

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >