Search Results

Search found 26810 results on 1073 pages for 'fixed point'.

Page 299/1073 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

  • 12.10 Wireless hotspot configuration and internet browsing - question

    - by Indian
    In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

    Read the article

  • Incorrect lighting results with deferred rendering

    - by Lasse
    I am trying to render a light-pass to a texture which I will later apply on the scene. But I seem to calculate the light position wrong. I am working on view-space. In the image above, I am outputting the attenuation of a point light which is currently covering the whole screen. The light is at 0,10,0 position, and I transform it to view-space first: Vector4 pos; Vector4 tmp = new Vector4 (light.Position, 1); // Transform light position for shader Vector4.Transform (ref tmp, ref Camera.ViewMatrix, out pos); shader.SendUniform ("LightViewPosition", ref pos); Now to me that does not look as it should. What I think it should look like is that the white area should be on the center of the scene. The camera is at the corner of the scene, and it seems as if the light would move along with the camera. Here's the fragment shader code: void main(){ // default black color vec3 color = vec3(0); // Pixel coordinates on screen without depth vec2 PixelCoordinates = gl_FragCoord.xy / ScreenSize; // Get pixel position using depth from texture vec4 depthtexel = texture( DepthTexture, PixelCoordinates ); float depthSample = unpack_depth(depthtexel); // Get pixel coordinates on camera-space by multiplying the // coordinate on screen-space by inverse projection matrix vec4 world = (ImP * RemapMatrix * vec4(PixelCoordinates, depthSample, 1.0)); // Undo the perspective calculations vec3 pixelPosition = (world.xyz / world.w) * 3; // How far the light should reach from it's point of origin float lightReach = LightColor.a / 2; // Vector in between light and pixel vec3 lightDir = (LightViewPosition.xyz - pixelPosition); float lightDistance = length(lightDir); vec3 lightDirN = normalize(lightDir); // Discard pixels too far from light source //if(lightReach < lightDistance) discard; // Get normal from texture vec3 normal = normalize((texture( NormalTexture, PixelCoordinates ).xyz * 2) - 1); // Half vector between the light direction and eye, used for specular component vec3 halfVector = normalize(lightDirN + normalize(-pixelPosition)); // Dot product of normal and light direction float NdotL = dot(normal, lightDirN); float attenuation = pow(lightReach / lightDistance, LightFalloff); // If pixel is lit by the light if(NdotL > 0) { // I have moved stuff from here to above so I can debug them. // Diffuse light color color += LightColor.rgb * NdotL * attenuation; // Specular light color color += LightColor.xyz * pow(max(dot(halfVector, normal), 0.0), 4.0) * attenuation; } RT0 = vec4(color, 1); //RT0 = vec4(pixelPosition, 1); //RT0 = vec4(depthSample, depthSample, depthSample, 1); //RT0 = vec4(NdotL, NdotL, NdotL, 1); RT0 = vec4(attenuation, attenuation, attenuation, 1); //RT0 = vec4(lightReach, lightReach, lightReach, 1); //RT0 = depthtexel; //RT0 = 100 / vec4(lightDistance, lightDistance, lightDistance, 1); //RT0 = vec4(lightDirN, 1); //RT0 = vec4(halfVector, 1); //RT0 = vec4(LightColor.xyz,1); //RT0 = vec4(LightViewPosition.xyz/100, 1); //RT0 = vec4(LightPosition.xyz, 1); //RT0 = vec4(normal,1); } What am I doing wrong here?

    Read the article

  • Set default owner/user

    - by Daniel Hollands
    I'm a web developer, and so have set-up an old machine in the office as an Ubuntu Server, for the purposes of testing websites. I've set-up LAMP and have created a /var/www folder, from which all my local sites are served. The issue is that of user permissions, i.e. any files that I copy into that folder (from my Windows machine via the network) automatically take on me (daniel) as their owner. The problem is that I want www-data to become the owner. I did some research and saw that it should be possible to use setuid (and setgid) to automatically set www-data as the owner of all files put into /var/www automatically, so far I've not had any luck making it work. Can someone help please? Thank you UPDATE: Would this do what I want it to do? Default file permissions for php user www-data UPDATE 2: I've kinda fixed my issue by changing my samba settings. Using Webmin, I was able to go in and change the default settings (as seen here: http://imageshack.us/photo/my-images/521/captureon.png/)

    Read the article

  • Chromebook C720 - issue suspending and booting

    - by user72727
    I recently bought an Acer C720 chromebook (Celeron, 2GB RAM, 16GB SSD) with the intention of loading Linux and using it as a cheap development laptop while on my holiday. The installation sort of went ok but initially the trackpad didn't work so I ran a script that mostly fixed that. My current issues are: Booting: it still goes to the chrome "unknown os" white screen - I have to press ctrl L - then escape then 1 then wait for 30 secs while it seems to be searching for something. Then Ubunto loads up fine. Any idea how to fix this? Suspend: if I close the lid of the laptop then it doesn't seem to suspend properly. At least when I open the lid the screen appears to be on but the screen is blank with a cursor. Nothing responds on the keyboard and I have to hold the power down to restart it. The suspend from the top menu has the same issue. Moving windows: I don't have a mouse click button so how do I move windows around the screen? Launcher bar: I've set mine to auto hide (which it does) but what exactly do you have to do to get it back? I just repeatedly jab the mouse at the side of the screen and eventually it pops up. I don't mind starting all over again but obviously a quick fix is preferred ;) Mike Ubunto 14.04.1 LTS Kernel 3.13.0-32-generic PS Sorry for so many questions.

    Read the article

  • Directory error when trying to create a new user

    - by Tom Brossman
    I added a second user 'shirley' in Settings - User Accounts, and set a password. The account type is Standard. In 11.04, this worked and I logged in and had a functioning desktop for this user. How is this done in 11.10? When I try to log in as this user I have this error: Nautilus could not create the required folder "/home/shirley/.config/nautilus". Before running Nautilus, please create the following folder, or set permissions such that Nautilus can create it. The only option then is to click OK, this dumps me out to full-screen Nautilus, like this: There is no launcher or visible way to start any programs. Print screen doesn't take a screengrab. The desktop is similar to this question but I get no terminal when I press CTRL+ALT+T. I have to press CTRL+ALT+F2 and restart from the terminal to get out of this. This answer is to install gnome-system-tools. Shouldn't I be able to add a second user with the default install? EDIT: I tried the deluser+adduser suggestion, there was no change after trying it. Here is what I got: tom@desktop:~$ sudo deluser shirley [sudo] password for tom: Removing user `shirley' ... Warning: group `shirley' has no more members. Done tom@desktop:~$ sudo adduser shirley Adding user `shirley' ... Adding new group `shirley' (1001) Adding new user shirley' (1001) with groupshirley' The home directory '/home/shirley' already exists. Not copying from `/etc/skel'. Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully Changing user information for shirley Enter the new value, or press ENTER for the default Full Name []: Room Number []: Work Phone []: Home Phone []: Other []: Is the information correct? [Y/n] y What has gone so wrong with simply adding a second user? Am I the only one having this problem? I'd reinstall if that fixed things, but this is a fresh install only a few days old.

    Read the article

  • Access denied error while mounting a shared folder?

    - by SSH
    I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

    Read the article

  • Collision and Graphics integration

    - by Shlomi Atia
    I'm a little confused about the integration between collision and graphics. They both need to share the same position in the world. The most obvious choice is the center of the entity, which is good for bounding volumes and fixed sized sprites. However, for characters with variable height size sprites like this: http://gamemedia.wcgame.ru/data/2011-07-17/game-sprite-sheet.jpg This is no longer good. The character won't align to the ground if I'll draw it from the center. I can just make the sprites the same height, but it will be a waste of memory (the largest sprite is 4 times larger then the smallest one). Even then, this is not an option at all with skeletal sprites like this one: http://user-generated-content.java-gaming.org/img-vault/212a171fc1ebb27ab77608fb9b2dd9bd9205361ce6300b21a7f8d06d025fbbd8.png It seems that the graphics need to be drawn from the ground for characters, but not for other images such as scenery and obstacles. The only solution I could think of was having another position called draw-position, which is the entity center for images, and is the the bottom of the collision volume for characters. Then when I draw relative to that position, it should work properly. I haven't found any references for something like that, so I'm kinda insecure about it. Does anyone knows of a better approach for this problem? Thanks

    Read the article

  • Why are you doing this? [closed]

    - by NIcholas Lawson
    I am working on a story that I am going to be querying to several magazines in my hometown about this work that is being done by the AXR group. This is a group of people who have networked online and are working on developing a higher level syntax structure than CSS and HTML currently offer. I am covering this is as a story because I see potential in this as a human interest story in cosmopolitan society. I have been asked by the group to pose this question to you and would appreciate any and all comments you would have on the following ... To AXR: So when does the internet become finished? At what point does a computer scientist say to himself ... my job here is finished ... the internet is complete? When is the internet ready to be more about the display of content than the uploading of new websites or computer tech? You are embarking on upon a sixty year project every day you work with this internet, what drives you? Why are you spending your hard earned hours working on the code to this computer? I spend thirty hours a week online because I love the writing and I know what would make the internet better ... ease of use ... i know it is difficult to program but I see some very elegant solutions online ... in this early inception phase of your programming development for this HSS prototype ... I would like to know why I do not see you programmers asking questions such as ... What would make the end user's life the easiest when using this code? I know you can solve the problem but an evolution forward would be simple, not simple to a computer scientist but simple to use for a career janitor ... if you could solve the problem of alleviating the stress at using a the computer you could get better content out of the computer ... right now the main problem is that the best content is in the hands of the people least likely to use the computer and the more simple you make the computer to use ... the better the content collection will be in the long run ... That is not what I want to talk about though ... why are you writing code when you could be writing stories? I know the computer is worthless without content so I build content, I know the book is worthless without the combinations of words in them, i know the television is worthless without the television news anchor or the actor, what I want to know from you folks in a very journalistic sense is why are you even bothering to bother to write code for a machine that has only made our lives i would dare say less interesting. why are you feeding the beast your time when you could be writing stories or being an actor or musician or auto mechanic ... why code? why this machine? what do you love about it? what do you hate about it? what do you wonder about it? I want to know so that starting out I know how to further shape my questions with axr ... i want the full story ... i want the real answers ... and i want to know why you are doing this, it would make for great writing if you could elucidate on this point.

    Read the article

  • Visual Studio 2010 Pro Power Tools Screencast

    - by Steve Michelotti
    Microsoft just released the Visual Studio 2010 Pro Power Tools extension and it is awesome. A summary of all the features can be found here and it is available in the Visual Studio Gallery here. There are a bunch of great features but, in my opinion, the best one is the replacement for the Add Reference dialog. This gives sub-string search capabilities as well as the ability to add multiple references without having to continually re-open the dialog. For this feature alone, you should install the Pro Power Tools right now. There are a few blogs posts that do a good job describing all the features but what I wanted to do here was to post a quick screencast (7 minutes) that shows the features that I think are really cool. I show most (but not all) of the features focusing on the ones I think are the best. The features I cover are: Installation with the Extension Manager Add Reference Dialog replacement Tab Well including pinned tabs, pinned tabs in second row, fixed close button, colorized tabs, dirty indicator Highlight current line Triple Click for full-line selection Ctrl + Click for Go To Definition Colorized Parameter Help Enjoy! (Right-click and Zoom to view in full screen)

    Read the article

  • CodePlex Daily Summary for Sunday, July 21, 2013

    CodePlex Daily Summary for Sunday, July 21, 2013Popular ReleasesMagick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6.MISAO: Ver. 5.33: Latest app and add-insC# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesDaRenamer: Renamer 2.1.0.5: Version 2.1.0.5 -fixed minor bugInstall Verify Tool: Install Verify Tool V 1.0: Win Service Web Service Win Service Client Web Service ClientOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0PMU Connection Tester: PMU Connection Tester v4.4.0: This is the current release build of the PMU Connection Tester, version 4.4.0 This version of the connection tester was released with openPDC 1.5 SP1 and openPDC 2.0 BETA. This application requires that .NET 4.0 already be installed on your system. Note this is the last release of the PMU Connection Tester that will built on .NET 4.0 using the TVA Code Library and the Time-series Framework. Future releases of the PMU Connection Tester will be built on .NET 4.5 (or later) using the Grid Sol...HiUpdateTools - easy publish and update your app: HiUpdateTools Add-in 1.0.0.5: - Generate ClientConfig.xml and adding to the project - Set ClientConfig.xml option "CopyToOutputDirectory"= Copy if newer - Fix client path not ending the backslash - Add Client assembly to VSX package - On first use, the tool is added to the reference to the client assembly - Fix client application - Multi-instance application - Run single instance of update applicationopen gaze and mouse analyzer: Ogama 4.4 BETA: This beta was published on 16.07.2013 and includes fixes and improvements since last 4.3 release, mainly in the recording section which solves problems with tobii and mirametrix devices, see the source code tab for details. Please test it, if you have one of this devices and give me feedback using the issue tracker or discussion tabs. Don´t forget to install .Net 4 framework and SQL Express before installing Ogama. When using Tobii tracking devices, you have to install apple bonjour also. On...SpaceFlight: SpaceFlight_v1.1: Added VCRedist.exe , run this first if you get the "MSVCP100.dll is missing" issueAdvanced Resource Tab for Blend: Advanced Resource Tab 2.0: Added filtering of (sub)-resource items and collapsing / expanding of all resource dictionaries.Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTNew ProjectsBlindspot: This project aims to create a fully-functional windowless desktop application allowing blind/visually impaired music fans the chance to access Spotify.HelloReading: ???????MonteMediaCC: The Monte Media Library is a Java library for processing media data. Supported media formats include still images, video, audio and meta-data. NETDeob: Deobfuscator and Unpacker for .NET Files.NthCatalanNumber: Write a program to calculate the Nth Catalan number by given N. http://en.wikipedia.org/wiki/Catalan_numberPokemon Battle Online 0791: ???????project site: the-west minimapPSeG Server FIles: PSeG Server FilesSample VariableSizedWrapGrid: This is an example of the use of particular VariableSizedWrapGrid GridView control. Where we can set the size of each item as needed It can make an appearance oServices Monitoring Management Pack: La supervision des services automatiques est un élément qui est déficient dans Operations Manager. Ce « Management Pack » sert à surveiller les services automatSinaIsTestingHisNewProject: this project is only for testing this site and any copying without my permission will be sewed by me and will be tracked by CIA and FBI and will be HeadShotSum of a sequence: Write a program that, for a given two integer numbers N and X, calculates the sum S = 1 + 1!/X + 2!/X2 + … + N!/XN Synchrophasor Analytics: Synchrophasor Analytics is a front end data processing and conditioning for downstream phasor based applications and an extension for development and analysis.tcp-bridge: a tcp bridge service to redirect incoming connections to another machine by using another incoming or outgoing connectionTypeScript Class Library: The TypeScript Class Library WPDialog: Library for developing app dialogs for Windows phone similar to Monotouch.DialogWPF File Renamer: Simple file renaming application made to brush up on my WPF data binding and MVVM skills.

    Read the article

  • C# Cursor stuck on busy state

    - by Ben
    So I implemented a fixed time step loop for my C# game. All it does at the moment is make a square bounce around the screen. The problem I'm having is that when I execute the program, the window doesn't allow me to close the program and the cursor is stuck on the busy icon. I have to go into visual studio and stop the program manually. Here's the loop at the moment public void run() { int updates = 0; int frames = 0; double msPerTick = 1000.0 / 60.0; double threshhold = 0; long lastTime = getCurrentTime(); long lastTimer = getCurrentTime(); while (true) { long currTime = getCurrentTime(); threshhold += (currTime - lastTime) / msPerTick; lastTime = currTime; while (threshhold >= 1) { update(); updates++; threshhold -= 1; } this.Refresh(); frames++; if ((getCurrentTime() - lastTimer) >= 1000) { this.Text = updates + " updates and " + frames + " frames per second"; updates = 0; frames = 0; lastTimer += 1000; } } }

    Read the article

  • Fix for poor hd playback for 11.04 upwards

    - by mark kirby
    Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

    Read the article

  • Making AI jump on a spot effectively

    - by Pasquale Sada
    How to calculate, in 3D environment, the closest point, from which an AI character can jump onto a platform? Setup I have an initial velocity V(Vx,Vy,VZ) and a spot where the character stands still at S(Sx,Sy,Sz). What I'm trying to achieve is a successful jump on a spot E(Ex,Ey,Ez) where you have clicked on(only lower or higher spot, because I've in place a simple steering behavior for even terrains). There are no obstacles around. I've implemented a formula that can make him jump in a precise way on a spot but you need to declare an angle: the problem arise when the selected spot is straight above your head. It' pretty lame that the char hang there and can reach a thing that is 1cm above is head. I'll share the code I'm using: Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 *a)); return vel * dir.normalized; Ended up using the lowest angle (20 degree) and checking for collision on the trajectory. If found any increase the angle. Here some code (to improve the code maybe must stop the check at the highest point of the curve): Vector3 BallisticVel(Vector3 target, float angle) { Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 * a)); return vel * dir.normalized; } Vector3 TrajectoryPoint(Vector3 startingPosition, Vector3 startingVelocity, float n ) { float t = 1/60 ; // seconds per time step Vector3 stepVelocity = t * startingVelocity; // m/s Vector3 stepGravity = t * t * Physics.gravity; // m/s/s return startingPosition + n * stepVelocity + 0.5f * (n*n+n) * stepGravity; } bool CheckTrajectory(Vector3 startingPosition,Vector3 target, float angle_jump) { Debug.Log("checking"); if(angle_jump < 80f) { Debug.Log("if"); Vector3 startingVelocity = BallisticVel(target, angle_jump); for (int i = 0; i < 180; i++) { //Debug.Log(i); Vector3 trajectoryPosition = TrajectoryPoint( startingPosition, startingVelocity, i ); if(Physics.Raycast(trajectoryPosition,Vector3.forward,safeDistance)) { angle_jump += 10; break; // restart loop with the new angle } else continue; } return true; JumpVelocity = BallisticVel(target, angle_jump); } return false; }

    Read the article

  • trying to setup wireless

    - by JohnMerlino
    I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

    Read the article

  • Where Have All the Ugly Forms Gone? Users and ADF Took Care Of It

    - by ultan o'broin
    Sometimes I hear that our application demos are a bit too "cutsey" and that we never talk about with any user roles that have lots of data entry as a requirement. Some (no names) consider those old clunker forms, with the myriad rows of fields, to be super-productive for data clerks. We do have such roles covered in Oracle Fusion Applications for sure. But consider what is really the issue here: productivity. Check out how the Oracle Fusion Financials Applications User Experience team went about designing for productivity when receiving and entering invoice data, for example. See how Fusion Financials caters so well for input and control of data? Central to all this is knowing the users and how they work: what tasks do they need to perform, and when. Read more about Fusion Financials productivity in the white paper, Get It Done Fast, Get It Done Right: The Oracle Fusion Financials User Experience. Now and then, I see forms that weren't designed for end user activity at all. Instead, they were designed by developers or by the IT department around the database schema. Forms with literally dozens of fields on the same page, sometimes. Forms that give the impression there was only task involved, when there may have been several. At times, completing one of these huge forms accurately became so tedious that, under pressure, it made more sense for the user to complete it quickly as possible and then let somebody else check it for accuracy and fill in the gaps from data emailed along in spreadsheet form. Data accuracy is critical in our business. Not good. Not efficient. Not productive. So here are a few basics on forms design for data entry-type user roles. A great place for developers to start exploring what is possible with forms layout is the Rich Client User Experience (RCUX) guidance on Form Layout, using ADF components. User-Centered Forms Design Considerations The starting point--something you must always keep in mind with your own design--is design for the end user. Find a representative end user, and keep that user engaged throughout the design, deployment, and test process. Consider these points in user testing those forms: Are there automated or technical solutions to entering the data that avoid manual input in the first place? For example, imports, uploads, OCR, whatever. Some day we will be able to tell Siri to do it, but leave that for now. Design your form to reflect the task involved (i.e., the business process) and not the database schema. On the form, group like fields together, logically. Eliminate duplicate data entry or prepopulate from previous data entry. Allow users to complete fields in the order they wish (i.e., no interdependency). Allow for tabbing between fields (keyboard is faster than mouse), so know how the browser supports this (see that RCUX guideline). Allow for final validation at the page level not at field-level entry. Way better for heads-down users. For example, ADF messages allow you to see a list of all validation errors on a page on a final submit or navigation action and to easily navigate to the point of error. Better still, be error tolerant. Allow users to enter data in formats they comfortable with. Bind any relevant user preference setting to the input format allowed (for example, the locale date format). Explore what data entry conversion can do for you automatically too (see the ADF converter demos, convenience patterns can also be written). Only ask for data input when it's needed. Get rid of, or hide optional fields. Cut down on the number of mandatory fields, and mark them clearly (use a *). Clearly label the fields in plain language. I am sure you may have a few more tips on forms design for data entry users. Remember the user before finding the comments.

    Read the article

  • Comparing Apples and Pairs

    - by Tony Davis
    A recent study, High Costs and Negative Value of Pair Programming, by Capers Jones, pulls no punches in its assessment of the costs-to- benefits ratio of pair programming, two programmers working together, at a single computer, rather than separately. He implies that pair programming is a method rushed into production on a wave of enthusiasm for Agile or Extreme Programming, without any real regard for its effectiveness. Despite admitting that his data represented a far from complete study of the economics of pair programming, his conclusions were stark: it was 2.5 times more expensive, resulted in a 15% drop in productivity, and offered no significant quality benefits. The author provides a more scientific analysis than Jon Evans’ Pair Programming Considered Harmful, but the theme is the same. In terms of upfront-coding costs, pair programming is surely more expensive. The claim of productivity loss is dubious and contested by other studies. The third claim, though, did surprise me. The author’s data suggests that if both the pair and the individual programmers employ static code analysis and testing, then there is no measurable difference in the resulting code quality, in terms of defects per function point. In other words, pair programming incurs a massive extra cost for no tangible return in investment. There were, inevitably, many criticisms of his data and his conclusions, a few of which are persuasive. Firstly, that the driver/observer model of pair programming, on which the study bases its findings, is far from the most effective. For example, many find Ping-Pong pairing, based on use of test-driven development, far more productive. Secondly, that it doesn’t distinguish between “expert” and “novice” pair programmers– that is, independently of other programming skills, how skilled was an individual at pair programming. Thirdly, that his measure of quality is too narrow. This point rings true, certainly at Red Gate, where developers don’t pair program all the time, but use the method in short bursts, while tackling a tricky problem and needing a fresh perspective on the best approach, or more in-depth knowledge in a particular domain. All of them argue that pair programming, and collective code ownership, offers significant rewards, if not in terms of immediate “bug reduction”, then in removing the likelihood of single points of failure, and improving the overall quality and longer-term adaptability/maintainability of the design. There is also a massive learning benefit for both participants. One developer told me how he once worked in the same team over consecutive summers, the first time with no pair programming and the second time pair-programming two-thirds of the time, and described the increased rate of learning the second time as “phenomenal”. There are a great many theories on how we should develop software (Scrum, XP, Lean, etc.), but woefully little scientific research in their effectiveness. For a group that spends so much time crunching other people’s data, I wonder if developers spend enough time crunching data about themselves. Capers Jones’ data may be incomplete, but should cause a pause for thought, especially for any large IT departments, supporting commerce and industry, who are considering pair programming. It certainly shouldn’t discourage teams from exploring new ways of developing software, as long as they also think about how to gather hard data to gauge their effectiveness.

    Read the article

  • Armchair CEO: Windows

    - by Scott Kuhl
    Originally posted on: http://geekswithblogs.net/scottkuhl/archive/2013/10/12/armchair-ceo-windows.aspxWelcome to part 3 of my Armchair CEO series where I prove just why I’m not running Microsoft.  In this insightful edition I’ll tell you how to make Windows, the golden flagship of Microsoft, a better product. Android Apps Windows Phone is not the only app store that needs a boost.  But unlike Windows Phone, there is a very easy way to get a lot more apps on your Windows PC: BlueStacks.  Right now BlueStacks has 3 things going against it: its UI integration is a desktop app hack, it does not work on RT, and no one know about it.  All three could be fixed if Microsoft bought the company or pulled off the same thing.  The store can be designed to give preference to Windows Store apps but it closes a lot of holes quickly. The Desktop Experience Windows should switch between desktop mode and tablet mode automatically.  Laptops without touch and desktops should work a lot more like Windows 7.  The PC should boot to desktop and Metro apps should run in windows, like MetroMix.  A tablet should boot to the Start Screen by default and pretty much work the same way it does now in 8.1.  Touch laptops should give the user an in your face option on first boot to pick the experience.  And finally, the experience can be changed automatically if the PC is docked or has external monitors hooked up. Death of the Desktop This might seem completely opposite to the last feature, but its not.  I should have no need to ever see the desktop from Start Screen mode.  Every settings needs to be available, an amazing port of the file explorer is needed, and Office Metro must be released.  Desktop apps should also be able to run in full screen mode like other Metro apps.

    Read the article

  • Need help partitioning when reinstalling Ubuntu 14.04

    - by Chris M.
    I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

    Read the article

  • June 2012 Critical Patch Update for Java SE Released

    - by Eric P. Maurice
    Hi, this is Eric Maurice. Oracle just released the June 2012 Critical Patch Update for Java SE.  This Critical Patch Update provides 14 new security fixes across Java SE products.  As discussed in previous blog entries, Critical Patch Updates for Java SE will, for the foreseeable future, continue to be released on a separate schedule than that of other Oracle products due to previous commitments made to Java customers.  12 of the 14 Java SE vulnerabilities fixed in this Critical Patch Update may be remotely exploitable without authentication.  6 of these vulnerabilities have a CVSS Base Score of 10.0.  In accordance with Oracle’s policies, these CVSS 10 scores represent instances where a user running a Java applet or Java Web Start application has administrator privileges (as is typical on Windows XP).  When the user does not run with administrator privileges (typical on the Solaris and Linux operating systems), the corresponding CVSS impact scores for Confidentiality, Integrity, and Availability for these vulnerabilities would be "Partial" instead of "Complete", thus lowering these CVSS Base Scores to 7.5. Due to the high severity of these vulnerabilities, Oracle recommends that customers obtain and apply these security fixes as soon as possible: Developers should download the latest release at http://www.oracle.com/technetwork/java/javase/downloads/index.html    Java users should download the latest release of JRE at http://java.com, and of course  Windows users can take advantage of the Java Automatic Update to get the latest release. In addition, Oracle recommends removing old an unused versions  of Java as the latest version is always the recommended version as it contains the most recent enhancements, and bug and security fixes.  For more information: •Instructions on removing older (and less secure) versions of Java can be found at http://java.com/en/download/faq/remove_olderversions.xml  •Users can verify that they’re running the most recent version of Java by visiting: http://java.com/en/download/installed.jsp   •The Advisory for the June 2012 Critical Patch Update for Java SE is located at http://www.oracle.com/technetwork/topics/security/javacpujun2012-1515912.html

    Read the article

  • The World of SQL Database Deployment

    - by GGBlogger
    In my early development days, I used Microsoft Access for building databases. It made things easy since I only needed to package the database with the installation package so my clients would have access to it. When we began the development of a new package in Visual Studio .NET I decided to use SQL Server Express. It was free and provided good tools - also free. I thought it was a tremendous idea until it came time to distribute our new software! What a surprise. The nightmare Ah, the choices! Detach the database and have the client reattach it to a newly installed – oh wait. FIRST my new client needs to download and install SQL Server Express with SQL Server Management Studio. That’s not a great thing, but it is one more nightmare step for users who may have other versions of SQL installed. Then the question became – do we detach and reattach or do we do a backup. It was too late (bad planning) to revert to Microsoft Access but we badly needed a simple way to package and distribute both the database AND sample contents. Red Gate to the rescue It took me a while to find an answer but I did find it in a package called SQL Packager sold by a relatively unpublicized company in England called Red Gate. They call their products “ingeniously simple” and I must agree with that description. With SQL Packager you point to the database (more in a minute) you want to distribute. A few mouse clicks and dialogs and you have an executable file that you can ship virtually anywhere and virtually any way which, when run, installs the database on your destination SQL Server instance! It really is that simple. Easier to show than tell Let’s explore a hypothetical case. Let’s say you have a local SQL database of customers and you have decided you want to share it with your subsidiaries or partners. Here is the underlying screen you will see on starting SQL Packager. There are a bunch of possibilities here but I’m going to keep this relatively simple. At this point I simply want to illustrate the simplicity of generating an executable to deliver your database. You will notice that you can set up a new package, edit an existing package or change a bunch of options. Start SQL packager And the following is the default dialog you get on startup. In the next dialog, I’ve selected the Server and Database. I’ve also selected Windows Authentication. Pressing Next causes SQL Packager to run a number of checks and produce a report. Now you’re given a comprehensive list of what is going to be packaged and you’re allowed to change it if you desire. I’ve never made any changes here so I can’t really make any suggestions. The just illustrates the comprehensive nature of so many Red Gate products including this one. Clicking Next gives you still further options. SQL Packager then works its magic and shows you a dialog with the results. Packager then gives you a dialog of the scripts it has generated. The capture above only shows 1 of 4 tabs. Finally pressing Next gives you the option to generate a .NET executable of a C# project. I’ve only generated an executable so I’m not in a position to tell you what the C# project looks like. That may be the subject of further discussions. You can rename the package and tell SQL Packager where to save it. I’ve skipped a lot but this will serve to illustrate the comprehensive (and ingenious) things Red Gate does. All in all, it’s a superb way to distribute populated SQL databases. Oh – we’ll save running the resulting executable for later also but believe me it’s insanely simple.

    Read the article

  • Why does working processors harder use more electrical power?

    - by GazTheDestroyer
    Back in the mists of time when I started coding, at least as far as I'm aware, processors all used a fixed amount of power. There was no such thing as a processor being "idle". These days there are all sorts of technologies for reducing power usage when the processor is not very busy, mostly by dynamically reducing the clock rate. My question is why does running at a lower clock rate use less power? My mental picture of a processor is of a reference voltage (say 5V) representing a binary 1, and 0V representing 0. Therefore I tend to think of of a constant 5V being applied across the entire chip, with the various logic gates disconnecting this voltage when "off", meaning a constant amount of power is being used. The rate at which these gates are turned on and off seems to have no relation to the power used. I have no doubt this is a hopelessly naive picture, but I am no electrical engineer. Can someone explain what's really going on with frequency scaling, and how it saves power. Are there any other ways that a processor uses more or less power depending on state? eg Does it use more power if more gates are open? How are mobile / low power processors different from their desktop cousins? Are they just simpler (less transistors?), or is there some other fundamental design difference?

    Read the article

  • Is this method of writing Unit Tests correct?

    - by aspdotnetuser
    I have created a small C# project to help me learn how to write good unit tests. I know that one important rule of unit testing is to test the smallest 'unit' of code possible so that if it fails you know exactly what part of the code needs to fixed. I need help with the following before I continue to implement more unit tests for the project: If I have a Car class, for example, that creates a new Car object which has various attributes that are calculated when its' constructor method is called, would the two following tests be considered as overkill? Should there be one test that tests all calculated attributes of the Car object instead? [Test] public void CarEngineCalculatedValue() { BusinessObjects.Car car= new BusinessObjects.Car(); Assert.GreaterOrEqual(car.Engine, 1); } [Test] public void CarNameCalculatedValue() { BusinessObjects.Car car= new BusinessObjects.Car(); Assert.IsNotNull(car.Name); } Should I have the above two test methods to test these things or should I have one test method that asserts the Car object has first been created and then test these things in the same test method?

    Read the article

  • Moving 2d camera in the y direction

    - by Alex
    I'm developing a simple game for the iphone and am struggling to work out the best way for the camera to follow the main character. The following picture hightlights the three main components: There are 3 components to this: Circle - the main character Green line - terrain Black background The terrain is simply made from an array of points (approx 20 points per screen width). The terrain is moved in the x direction relative to the black background in order to keep the circle in its position shown. The distance to move the terrain is simply: movex = circle.position.x - terrain.position.x with a constant to fix the circle at some distance from the left of the screen. I am struggling to determine the best way to position the terrain in the y plane keep the focus in the character. I want to move the terrain in the y direction smoothly and not fix it to the position of the circle, so the circle can move in the y plane. If I take the same approach as the x positioning, the character is fixed at a point on the screen and the terrain moves. I could sample some terrain points either side of the character and produce an average, but in my implementation this was not smooth. I thought another approach might be to create a camera 'line' that is a smooth version of the terrain line and make the camerea follow this, but I'm not sure if this is the optimum solution. Any advice is much appreciated!

    Read the article

  • Frame Independent Movement

    - by ShrimpCrackers
    I've read two other threads here on movement: Time based movement Vs Frame rate based movement?, and Fixed time step vs Variable time step but I think I'm lacking a basic understanding of frame independent movement because I don't understand what either of those threads are talking about. I'm following along with lazyfoo's SDL tutorials and came upon the frame independent lesson. http://lazyfoo.net/SDL_tutorials/lesson32/index.php I'm not sure what the movement part of the code is trying to say but I think it's this (please correct me if I'm wrong): In order to have frame independent movement, we need to find out how far an object (ex. sprite) moves within a certain time frame, for example 1 second. If the dot moves at 200 pixels per second, then I need to calculate how much it moves within that second by multiplying 200 pps by 1/1000 of a second. Is that right? The lesson says: "velocity in pixels per second * time since last frame in seconds. So if the program runs at 200 frames per second: 200 pps * 1/200 seconds = 1 pixel" But...I thought we were multiplying 200 pps by 1/1000th of a second. What is this business with frames per second? I'd appreciate if someone could give me a little bit more detailed explanation as to how frame independent movement works. Thank you.

    Read the article

  • Virtualization or Raw Metal?

    - by THE
    Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-fareast-language:EN-US;} With the growing number of customers who want to run the Oracles EPM/BI (or other Fusion Middleware Software) in a virtualized environment, we face a growing number of people asking if running Oracle Software within VMware is supported or not. Two KM articles reflect Oracles policy towards the use of VMware: 249212.1 and 475484.1 . The bottom line is: “you may use it at your own risk, but Oracle does not recommend it”. So far we have seen few problems with the use of VMware (other than performance and the usual limitations) but Oracle does not certify its software for the use in VMware (and specifically for RAC Software actively refuses any support) and any issue that may occur will be fixed for the native OS only. It is on the customer to prove that the issue is NOT due to VMware in case that an issue is encountered. See: “Oracle Fusion Middleware Supported System Configurations page” And also “Supported Virtualization and Partitioning Technologies for Oracle Fusion Middleware”

    Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >