Search Results

Search found 11078 results on 444 pages for 'virtual inheritance'.

Page 299/444 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

• Trouble joining Windows Server 2008 to Domain

  - by Jim R

  When I try to join my new server to my existing domain I get the following error: "An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resove DNS names in the target domain." I have tried all of the following already: Successfully pinged the domain controller. Ping the new server from the domain controller by IP address and by DNS name. Ping the DC server from the new server by IP address and by DNS name. Changed the network to DHCP (it was originally static). No joy as static or DHCP. Turned off all firewall settings. Added the domain name to 'hosts' file. Added the server name of the primary domain controller to the 'hosts' file in the new server. Any ideas? Thanks in advance for any help! Jim Update: With help from J. Brian Kelly (Thanks) I have managed to narrow down the problem to a DNS issue. Specifically, UDP/53 packets are being sent (they are seen in Network Monitor), but are not getting to the DNS server. But, I do not yet know why. Update: The quested output from IPCONFIG for the HyperV host and the virtual machine. IPCONFIG from HyperV Server Windows IP Configuration Host Name . . . . . . . . . . . . : HYPER Primary Dns Suffix . . . . . . . : sfi-wfc.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi-wfc.com Ethernet adapter Local Area Connection 4: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Primary Network Physical Address. . . . . . . . . : 00-30-48-CA-CC-7A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd16:3ac2:3d4f:e275%679(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.100.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.100.10 DHCPv6 IAID . . . . . . . . . . . : -1476382648 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-10-20-E9-00-30-48-CA-CC-7A DNS Servers . . . . . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Intel(R) 82576 Gigabit Dual Port Network Connection #2 Physical Address. . . . . . . . . : 00-30-48-CA-CC-7B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPCONFIG from Virtual Machine Windows IP Configuration Host Name . . . . . . . . . . . . : DB Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-66-03-02 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.100.128(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, August 29, 2009 10:44:45 AM Lease Expires . . . . . . . . . . : Tuesday, September 01, 2009 3:08:33 PM Default Gateway . . . . . . . . . : 192.168.100.10 DHCP Server . . . . . . . . . . . : 192.168.100.5 DNS Servers . . . . . . . . . . . : 192.168.102.5 Primary WINS Server . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 8: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : isatap.sfi Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• Windows Server 2003 Hacked - Files Being Uploaded

  - by jreedinc

  Blank directories are being created on my Windows Server 2003 virtual server with sub directories that are weird (for example: "88ÿ ÿ ÿÿþþ þþ13þ"). It looks like they are uploading bootlegged DVDs and pirated software. All of my bandwidth and file space is being eaten up. Could this be a shared permissions issue? Where should I look to further investigate this? My security permissions for the directory that is being hit are as followed: Administrators - ALL GRANTED IIS_WPG - Read & Execute, List Folder Contents, Read Internet Guest - DENY SYSTEM - ALL GRANTED Users - Read & Execute, List Folder Contents, Read My Event Viewer is showing many Logon/Logoff with NO IP?

  Read the article

• Ubuntu Nvidia Xorg Twinview doesnt like my monitors

  - by Andrew Bolster

  Basically, using the latest available ubuntu drivers (195.36.15) I cannot for the life of me get my two monitors to operate at suitable resolutions. When not using the drivers atall and going single-screen, both monitors support 1680x1050, but this option is only shown for one monitor in nvidia-settings, and when i manually add a metamode into the xorg.conf, it just gives up initialising the second screen. (**) Mar 25 15:49:47 NVIDIA(0): TwinView enabled (II) Mar 25 15:49:47 NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1 (II) Mar 25 15:49:47 NVIDIA(0): Validated modes: (II) Mar 25 15:49:47 NVIDIA(0): "1680x1050,1680x1050" (II) Mar 25 15:49:47 NVIDIA(0): Virtual screen size determined to be 1680 x 1050 Any ideas?

  Read the article

• Ubuntu Nvidia Xorg Twinview doesnt like my monitors

  - by Andrew Bolster

  Basically, using the latest available ubuntu drivers (195.36.15) I cannot for the life of me get my two monitors to operate at suitable resolutions. When not using the drivers atall and going single-screen, both monitors support 1680x1050, but this option is only shown for one monitor in nvidia-settings, and when i manually add a metamode into the xorg.conf, it just gives up initialising the second screen. (**) Mar 25 15:49:47 NVIDIA(0): TwinView enabled (II) Mar 25 15:49:47 NVIDIA(0): Assigned Display Devices: CRT-0, CRT-1 (II) Mar 25 15:49:47 NVIDIA(0): Validated modes: (II) Mar 25 15:49:47 NVIDIA(0): "1680x1050,1680x1050" (II) Mar 25 15:49:47 NVIDIA(0): Virtual screen size determined to be 1680 x 1050 Any ideas?

  Read the article

• Hyper-V R2 Performance Counters

  - by Ascendo

  Hi all I've been playing around with the WMI performance counters for Hyper-V. Of interest to me are the Virtual NIC bytes/sec input and output counters. I notice that the results are very "spikey". Over what time period is the latest counter averaged? I'm trying to calculate total traffic volume per VM, but sometimes a very high instantaneous poll result is inflating the result as I only poll the result each minute. I would prefer to read a 'bytes total' counter instead of a 'bytes/sec' counter - is there such a thing? Thanks Acendo

  Read the article

• Visual Studio Agents 2012 on Server 2003 SP2

  - by Corith Malin

  I'm attempting to build out our Lab Manager with TFS 2012. On a virtual machine running Server 2003 SP2 32bit, I'm attempting to install the Visual Studio Agents 2012 and am running into an error: Setup Failed! Install cannot continue because some required components failed. Microsoft .NET Framework 4.5 Asia Looking into it, the install log is erroring when it's attempting to install dotNetFx45_Full_x86_x64.exe component. Looking at that install log, it is failing with: The .NET Framework 4.5 is not supported on this operating system. So, I see according to the Agents 2012 MSDN documentation, that Server 2003 SP2 is supported by Agents 2012. But I also see that according to the .NET 4.5 MSDN documentation, Server 2003 isn't supported. So how do I install Agents 2012 on 2003 SP2 as the documentation implies I can?

  Read the article

• Parallels 5: upgrade from Vista to Win 7: annoying deadlock

  - by nobody

  What I have: Parallels 5, Vista installed. Trying to upgrade to Win 7. I have the Win7 .iso mounted as a DVD to my virtual machine. When I start the machine from this DVD, and attempt the upgrade, I'm told (paraphrased) "You booted from DVD. Don't do this. Reboot, then insert the DVD, commence the upgrade from there." But when I try that, the upgrade keeps failing because "There is not enough disk space". I've proven this is a red herring of an error message; the real problem is the installer can't find -any- disk drives. When I instead choose the "Advanced" install, and I am prompted to choose the disk drive, there aren't any to choose from. How do unblock this deadlock?

  Read the article

• firehol (firewall) with bridge: how to filter

  - by Leon

  I have two interfaces: eth0 (public address) and lxcbr0 with 10.0.3.1. I have a LXC guest running with ip 10.0.3.10 This is my firehol config: version 5 trusted_ips=`/usr/local/bin/strip_comments /etc/firehol/trusted_ips` trusted_servers=`/usr/local/bin/strip_comments /etc/firehol/trusted_servers` blacklist full `/usr/local/bin/strip_comments /etc/firehol/blacklist` interface lxcbr0 virtual policy return server "dhcp dns" accept router virtual2internet inface lxcbr0 outface eth0 masquerade route all accept interface any world protection strong #Outgoing these protocols are allowed to everywhere client "smtp pop3 dns ntp mysql icmp" accept #These (incoming) services are available to everyone server "http https smtp ftp imap imaps pop3 pop3s passiveftp" accept #Outgoing, these protocols are only allowed to known servers client "http https webcache ftp ssh pyzor razor" accept dst "${trusted_servers}" On my host I can connect only to "trusted servers" on port 80. In my guest I can connect to port 80 on every host. I assumed that firehol would block that. Is there something I can add/change so that my guest(s) inherit the rules of the eth0 interface?

  Read the article

• After installing Windows Phone 8 SDK, Connectify doesn't work

  - by Pratyush Nalam

  Today I installed Windows Phone 8 SDK from the official site. After installing and a couple of restarts (it restarted the PC to enable Hyper-V), I opened Connectify. I use Connectify Hotspot to connect my iPod to the internet as I have an ethernet connection and no wireless router. The problem is that now, Connectify doesn't show WiFi in Share Over. The attached screenshot shows this. Previously, before I installed the SDK, it would show Ethernet and Wi-Fi. I would select WiFi and share my internet. Now, this is completely screwed. EDIT: I found out that the Microsoft Virtual Wi-Fi Miniport Driver has got disabled and I am not able to enable it again. Please advise. Please advise on what to do Hardware: Windows 8 Pro with Media Center, Apple MacBook Pro 9,1 15 inch Mid-2012 (non retina)

  Read the article

• How to persist changes to instances in the cloud.

  - by Peter NUnn

  Hi folks, I must be missing something here, but can someone clue me in on how to persist changes (such as software installs etc) on machines in the cloud (either EC2 or my own Eucalyptus cloud). I have instances running.. can attach extra disks to them etc., but every time I terminate the instance, all of my changes are lost the next time I run them. Now, this sort of makes sense in that the instances are virtual, but, there must be some way to make these changes persist. I'm just missing how its done. Thanks. Peter.

  Read the article

• Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

  - by Justin Grant

  I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

  Read the article

• Netinstalling CentOS if the gateway is in a different subnet

  - by James Lawrie

  I have a KVM host (A) running a virtual machine (B). They each have their own external IP address and the networking is setup using bridging between eth0 and br0 on A. B uses eth0, with A being the gateway. The problem is that the two external IP addresses are on different subnets (different /8s in fact) so by default, B claims it cannot reach A (Network Unreachable). I can resolve this by adding a static route on B: echo "any host gateway_ip dev eth0" > /etc/sysconfig/static-routes Modifying /etc/init.d/networking to reload the gateway after applying static routes (I only added the final line before fi): if [ -f /etc/sysconfig/static-routes ]; then grep "^any" /etc/sysconfig/static-routes | while read ignore args ; do /sbin/route add -$args done route add default gw "${GATEWAY}" fi If I then restart networking, it comes online. How can I do this (or work around it some other way) prior to the system being installed, ideally inside an Anaconda kickstart file?

  Read the article

• Both servers running keepalived become master

  - by pcent

  After a network failure,both servers running keepalived become master. When the network is reestablished, both keep the MASTER state. What could be causing it? Edited: Another information that might be relevant, each server has two NICs. Here is the virtual instance configuration: vrrp_instance VGAPP { interface eth0 virtual_router_id 61 state BACKUP nopreempt priority 50 advert_int 3 virtual_ipaddress { 10.26.57.61/24 } track_interface { eth0 } track_script { jboss_check #tomcat_check #interface_check #interface_check02 } notify_master "/opt/keepalived/scripts/set_state.sh MASTER" notify_backup "/opt/keepalived/scripts/set_state.sh BACKUP" notify_fault "/opt/keepalived/scripts/set_state.sh FAULT" notify_stop "/opt/keepalived/scripts/set_state.sh STOPPED"}

  Read the article

• Should I replace libapache2-mod-php5-filter with libapache2-mod-php5 on Debian 6 Apache 2.2.16?

  - by luison

  Upgrading various virtual machines we are having an issue with the Debian package upgrade to version 2.2.16 The upgrade (surprisingly) seems to remove libapache2-mod-php5 replacing it with libapache2-mod-php5-filter. This gave us some headache as the php.ini was pointing to the "old" one and some of the apache.conf conditional module rules stopped working. We can fix all those but we can't figure out if there would be any issues if we just "reversed" this and simply install libapache2-mod-php5 again and load that module instead of the "filter" one or in there is anyway to "alias" a module. I tend to think that the change "has a reason" but after reading apache2 and php5: module or filter I understand the module differences are to do with post delivery security issues.

  Read the article

• MS-DOSdivide overflow

  - by repozitor

  when i want to install my dear application on MS-DOS os, i see error "Divide Overflow" what is the meaning of this error and how to fix it? the procedure of installing is: 1-partitioing my HDD disk 2-format C drive 3-installing MS-DOS 4-add the flowing lines to config.sys "DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE RAM DEVICE=C:\DOS\RAMDRIVE.SYS 6000 512 64 /e" 5-insert my floppy application and then restart 6-when boot process completed, all of the thing appear correctly and i now how to do the next steps note:for installing my application i need to boot from floppy app when i have ms-dos on my hdd disk i do it successfully on the Virtual machine, Q emulator but i can't do it on the real machine, Vectra HP PC, because of divide overflow

  Read the article

• router w/ WOL out-of-the-box, or is known to work with open firmware

  - by Jaroslav Záruba

  I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed to dd-wrt I'd prefer if the new one supported WOL out-of-the-box. other required features would be: dyndns service support port forwarding sometimes it is called "virtual server" I guess NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes) did I mention WiFi? preferably w/ some range extending technology, if such stuff works at all

  Read the article

• tcp flags in iptables: What's the difference between RST SYN and RST and SYN RST ? When to use ALL?

  - by Kris

  I'm working on a firewall for a virtual dedicated server and one of the things I'm looking into is port scanners. TCP flags are used for protection. I have 2 questions. The rule: -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP First argument says check packets with flag SYN Second argument says make sure the flags ACK,FIN,RST SYN are set And when that's the case (there's a match), drop the tcp packet First question: I understand the meaning of RST and RST/ACK but in the second argument RST SYN is being used. What's the difference between RST SYN and RST and SYN RST ? Is there a "SYN RST" flag in a 3 way handshake ? Second question is about the difference between -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP and -p tcp --tcp-flags ALL SYN,ACK,FIN,RST SYN -j DROP When should ALL be used ? When I use ALL, does that mean if the tcp packet with the syn flag doesn't have the ACK "and" the FIN "and" the RST SYN flags set, there will be no match ?

  Read the article

• Adsense-type services without the content check?

  - by Ryan Ahearn

  Are there any ad-placing services that don't mind that the page is nothing but a page of ads? Someone else with a .cn tld is pointing to my IP address. I currently have that site on its own name based virtual host that responds to every request with a 403, but I figure if I am paying for the incoming bandwidth, I might as well try to make some money off it. I don't want to actually create any content for this site, which prevents me from using adsense. My only requirements are that it is free for me to sign up and that they don't mind the lack of content.

  Read the article

• Can't access USB drive anymore

  - by marie

  I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

  Read the article

• OS X Lion - Installing Oracle 10g Standard Edition

  - by Cellze

  Im trying to install oracle 10g on to OS X Lion, I have previous achieved this on snow leopard with the following http://blog.rayapps.com/2009/09/14/how-to-install-oracle-database-10g-on-mac-os-x-snow-leopard/ The issue im having is that the ulimit settings in the oracle/.bash_profile cannot be modified. I have the following in the bash_profile: export DISPLAY=:0.0 export ORACLE_BASE=$HOME umask 022 # must match `sysctl kern.maxprocperuid` ulimit -Hu 512 ulimit -Su 512 # must match `sysctl kern.maxfilesperproc` ulimit -Hn 10240 ulimit -Sn 10240 Upon applying the bash_profile settings . ~/.bash_profile i get the following error: -bash: ulimit: max user processes: cannot be modify limit: Invalid argument This then results in $ sqlplus / as sysdba not functioning correctly with a Segmentation fault: 11 The output of $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 10240 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 512 virtual memory (kbytes, -v) unlimited If any one knows how I can apply these ulimit settings to the oracle user I have created to allow me to install sqlplus and therefore create a db, that would be great.

  Read the article

• Virtualised Sharepoint Backup Strategies

  - by dunxd

  I have a Sharepoint (OSS 2007) farm running on three virtual machines in VMWare ESX, plus a SQL Server backend on physical hardware. During a recent Business Continuity Planning event I tried restoring the sharepoint farm with only the config and content databases, and failed to get things working. My plan was to build a new sharepoint server, then attach this to a restoration config database and install the Central Management site on this server, then reattach the content databases. This failed at the Central Management part of the plan. So I am back to the drawing board on the best strategy for backup and recovery, with reducing the time and complexity of the restore job the main objective. I haven't been able to find much in the way of discussion of backup/restore strategies for Sharepoint in a VMWare environment, so I figured I'd see if anyone on server fault has any ideas or experience.

  Read the article

• Does anybody wish to help a poor researcher publish a paper?

  - by Mihai Todor

  I don't know if this is a good place to beg for help, but here it goes: basically, I need to run a secure recommender system simulation (C++ console application) in order to meet tonight's deadline, and the faculty's server grid decided to go offline. I could really use something like 10+ (actually, about 16 would be required to meet the deadline) virtual instances of some Linux that has GMP installed... Ideally, they should all have the same specs, because a part of the simulation will represent performance benchmarks. If my question is inappropriate in any way, I kindly ask the administrators to remove it.

  Read the article

• Hyper-V 2012 and P2000 SAS SAN

  - by user155950

  Hi I am having major problems setting up a Hyper-V 2012 cluster on a P2000 SAS SAN. Running System Center VMM 2012 SP1 I am unable to see any storage to create my cluster. Has anyone had experienced anything similar? Under fabric and storage I can't add the P2000, all I can do is use storage spaces in server manager to create a storage pool and virtual disk. This allows me to create a file share which I can add to VMM but I still can't see any disk to create a cluster. I am just about at the point where I want to tear my hair out wipe the servers and stick VMware on them because I know it works as I have set several systems up like this in the past. The Hyper-V servers can see the storage and in server manager on my management machine it seems to know both servers can see the same disk. VMM is running on the same machine and it can't see any disk. Help..... Thanks Mike

  Read the article

• Accessing a website's directory in IIS from File Zilla

  - by Cdeez

  I have my Asp.net website deployed in my IIS's Virtual directory. Usually a FTP software like File Zilla is used to upload files to a website's directory from a remote system. File Zilla asks for a Host name, Username, password to connect to the remote server. Now all I want is my users in LAN should be able to access this directory from their system using FTP software like FileZilla. So how can I provide the Host name, username and password to my website's directory. I tried to find it on google but no help. Detailed steps please. Its IIS 5.1 version.

  Read the article

• Setting up routing for MS DirectAccess to a VMWare EsXi Host

  - by Paul D'Ambra

  I'm trying to set up DirectAccess on a virtual machine so I can demonstrate it's value and then if need be add a physical machine to host it. I'm hitting a problem because the Direct Access machine (DA01) needs to have 2 public addresses actually configured on the external adapter but there is a Zyxel Zywall USG300 between the VMware ESXi host and the outside world. I've summarised my setup in this diagram If I ping from the LAN to 212.x.y.89 I get a response but if I ping from the VM I get destination host unreachable. I used "route add 212.x.y.89 192.c.d.1" and get request timed out. At that point I see outbound traffic allowed on the Zyxel firewall but nothing coming back. I'm past my understanding of routing and VMWare so am not sure how to tie down where my problem lies (or even if this setup is possible). So any help massively appreciated. Paul

  Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >