Search Results

Search found 227 results on 10 pages for 'e lease'.

Page 3/10 | < Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >

• Can't Start ISC DHCP IPv6 Server

  - by MrDaniel

  Trying to enable the ISC DHCP server for just IPv6 on Ubuntu 12.04 LTS. I have downloaded and installed the DHCP server via the following command: $ sudo apt-get install isc-dhcp-server Then I have followed the instructions in the following resources, Ubuntu Wiki DHCPv6, SixXS - Configuring ISC DHCPv6 Server and Linux IPv6 HOWTO - Configuration of the ISC DHCP server for IPv6 . So from review all those resources it seems like I need to: set a static IPv6 address for the Interface I want to run the DHCPv6 server from that is part of the IPv6 network subnet outside the DHCP range. Edit the /etc/dhcp/dhcpd6.conf file to configure the DHCPv6 range etc. Create the /var/lib/dhcp/dhcpd6.leases Manually start the DHCPv6 server. Setting the Static IP for eth0 $ sudo ifconfig eth0 inet6 add 2001:db8:0:1::128/64 My dhcpd6.conf default-lease-time 600; max-lease-time 7200; log-facility local7; subnet6 2001:db8:0:1::/64 { #Range for clients range6 2001:db8:0:1::129 2001:db8:0:1::254; } Created the dhcpd6.leases file As indicated in the dhcpd.leases man page. $ touch /var/lib/dhcp/dhcpd6.leases #Tried with sudo as well Manually starting the DHCPv6 server. Attempted to start the server using the following command: $ sudo dhcp -6 -f -cf /etc/dhcp/dhcpd6.conf eth0 The problem, the DHCP will not start, with an append error for the dhcpd6.leases file as indicated below when running the manual start command noted above. Can't open /var/lib/dhcp/dhcpd6.leases for append. Any ideas what I might be missing?

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• 100% Product Coverage in EBS CRM Communities

  - by Oracle_EBS

  Starting June 1st we are now providing 100% coverage for the entire Oracle CRM product line! To facilitate this growth we have made the following changes: Quoting, Telesales, Mobile Field Service and Lease and Finance Management have all been decommissioned and their content moved to their respective communities. Quoting and Telesales are now covered in the newly renamed Sales, Marketing & Common Apps community. Mobile Field Service is now covered in the Field Service Product Family community which used to be called Depot Repair. Lease and Finance Management is now under Contracts. The CRM Communities are an excellent channel for collaborating on issues that are not highly time sensitive or complex. Check with Oracle experts and Industry Peers as they can provide a clue or a nudge toward an answer or a confirmation on a workaround. Some of the best and brightest will be there to assist you. Check the News & Announcement regions for an updated list of covered products. Here are links to the current CRM communities. Service Install Base Contracts CRMO Field Service Product Family Sales, Marketing & Common Apps Trade Management Sales Compensation

  Read the article

• Can ping device from one computer and not the other

  - by Sean Duggan

  I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

  Read the article

• AppFabric Cache errors

  - by Joseph

  The AppFabric Cache in our production crashes almost every day, and is highly unstable. The below errors are logged: Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode:SubStatus:There is a temporary failure. Please retry later. (Sufficient secondaries not present or they are in throttled state.) Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode:SubStatus:There is a temporary failure. Please retry later. (The request did not find the primary.) AppFabric Caching service crashed.{Lease with external store expired: Microsoft.Fabric.Federation.ExternalRingStateStoreException: Lease already expired at Microsoft.Fabric.Data.ExternalStoreAuthority.UpdateNode(NodeInfo nodeInfo, TimeSpan timeout) at Microsoft.Fabric.Federation.SiteNode.PerformExternalRingStateStoreOperations(Boolean& canFormRing, Boolean isInsert, Boolean isJoining)} Could someone please provide me some inputs? This is a HA enabled cache environment with 3 cache hosts. All of them are running on Windows Server 2008 Enterprise Edition, and the SQL Server is used for config.

  Read the article

• DHCP and DNS services configuration for VOIP system, windows domain, etc

  - by Stemen

  My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

  Read the article

• 1 Million IOPS

  - by GrumpyOldDBA

  As a keen follower of storage performance I couldn't help but be drawn to this article in The Register http://www.theregister.co.uk/2010/04/14/lsi_million_iops/ this morning. I gave my 5 year old laptop a new lease of life with a SSD and in combination with the old drive made external managed to reduce the time of a demo query from 50 odd mins down to 6 mins. I also have 4 Silicon Power 32GB SSDs set up as a raid 0 on my home server, an overblown PC. http://www.futurestorage.co.uk/index.asp?selmanuf...(read more)

  Read the article

• DHCP server with multiple interfaces on ubuntu, destroys default gateway

  - by Henrik Alstad

  I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

  Read the article

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• No client internet access when setting up these iptables rules

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• ISC-DHCP not providing address

  - by kiler129

  I just replaced my old router using server with Ubuntu. Everything's fine except DHCP. When I tried connecting iPhone - it works: http://pastebin.com/NNEeiRLY but unfortunately some of my devices can't get IP from server, e.g. my computer: http://pastebin.com/N6LnsEWC Here's my isc configuration: http://pastebin.com/N5KQnhZV I've also tried running DHCP server as root (because of some permission denied in logs on lease file). What can I do?

  Read the article

• CRM: New Rollup Patches Released

  - by LuciaC

  See the table below for new rollup patches released for CRM family products. Product  Patch Number Reference Service Patch 17467506:R12.CS.B12.1.3:BUG FIXES FOR CS: OCTOBER'13 RUP PATCH n/a iStore Patch 16509570:R12.IBE.B- ORACLE ISTORE 12.1.3+ ROLLUP 1 Doc ID 1560963.1 Lease and Finance Management Patch 17485497:R12.OKL.B - OLFM : 1213 RUP3 DELTA 15 n/a For Trade Management and Price Protection the following Information Centers list the latest recommended patches and recently released patches: Critical, Recommended and Latest Patches for Oracle Trade Management (Doc ID 1569791.2) Critical, Recommended and Latest Patches for Oracle Price Protection (Doc ID 1305110.2)

  Read the article

• PXE boot linux. PXE-E51: No DHCP or proxyDHCP offers were received

  - by athspk

  I am trying to have an ubuntu box (192.168.10.9) acting as a PXE server, but i have trouble getting DHCP to work. The PXE server is connected to a SOHO router (192.168.10.1) acting as a switch. I have disabled the DHCP server on the router. $ dhcpd --version isc-dhcpd-4.2.4 The contents of /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name-servers 192.168.10.1; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; subnet 192.168.10.0 netmask 255.255.255.0 { range dynamic-bootp 192.168.10.101 192.168.10.200; option routers 192.168.10.1; option broadcast-address 192.168.10.255; next-server 192.168.10.9; filename "/tftpboot/pxelinux.0"; } The contents of /etc/default/isc-dhcp-server INTERFACES="eth0" When the client boots, it tries to get an IP address from the server but fails with the following Error message: PXE-E51: No DHCP or proxyDHCP offers were received. On Server side, i was tailing /var/log/syslog while the client tries to boot: Dec 4 12:57:10 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:11 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Please advise. Thanks in advance

  Read the article

• Unknown user in terminal

  - by Giles B

  Im having a strange problem with the terminal in OS X. When I open the terminal the username at the command prompt is: unknown-04-0c-ce-e3-0d-c2: ~ I can't pinpoint when this first started or why unfortunately. I usually use iTerm for web development purposes but this also occurs in the normal OS X Terminal app. Any ideas/help would be really appreciated. Thanks Update: Thanks to @fayadfami and @aliasgar for the correct answers and steering me in the right direction. Also this forum post helped http://forums.macrumors.com/showthread.php?t=152407 The extract from the right post: Having run into the exact same issue myself, and having come across this thread while attempting to figure it out, I thought I'd post the answer. OS X is initially setting your hostname to what's set for your Computer Name in Sharing; however, if you're set up for DHCP and you match a current lease on your DHCP server (i.e., match the IP address of another recent user), OS X will then set your hostname to whatever the DHCP server currently has for that lease. This freaked me out incredibly at first, as I had just reformatted (having just purchased my first Mac and wanting to see how the installer worked) and knew I had not yet changed the Computer Name in Sharing -- yet my system hostname at the Terminal prompt was indeed changed to what I had previously set, pre-format. I grepped around, not finding the name anywhere save log entries; I thought either the format didn't actually properly wipe everything, or I was losing my mind. Finally I logged into my router (it's a Linksys WRT54GS running OpenWRT), and found the hostname in the current leases file. I then manually set my Mac's IP to something different, and volia! -- the hostname was back to what I expected. I hope this helps save someone from the same paranoia I went through.

  Read the article

• How do I create a wifi network bridge with qemu on OS X?

  - by a paid nerd

  I grabbed a small FreeBSD live CD and QEMU, and I'm trying to bridge my Mac OS X 10.8 wifi connection so that the guest OS is available on my LAN. However, the guest OS never gets a DHCP lease. This works perfectly with VirtualBox in their "bridged" network mode, so I know it can be done. I need to get it working with QEMU because VirtualBox doesn't support the architecture that I need for this project. Here's what I've done so far based on hours of googling: Installed TUNTAP for OS X Told OS X to supposedly forward all packets, even ARP: (NOTE: This doesn't appear to work.) $ sudo sysctl -w net.inet.ip.forwarding=1 $ sudo sysctl -w net.link.ether.inet.proxyall=1 $ sudo sysctl -w net.inet.ip.fw.enable=1 Created a bridge: $ sudo ifconfig bridge0 create $ sudo ifconfig bridge0 addm en0 addm tap0 $ sudo ifconfig bridge0 up $ ifconfig bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:xx:xx:xx:xx Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 member: tap0 flags=3<LEARNING,DISCOVER> port 8 priority 0 path cost 0 tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether ca:3d:xx:xx:xx:xx open (pid 88244) Started tcpdump with -I in the hopes that it enables promiscuous mode on the wifi device: $ sudo tcpdump -In -i en0 Run QEMU using the bridged network instructions: $ qemu-system-x86_64 -cdrom mfsbsd-9.2-RELEASE-amd64.iso -m 1024 \ -boot d -net nic -net tap,ifname=tap0,script=no,downscript=no But the guest system never gets a DHCP lease: If I tcpdump -ni tap0, I see lots of traffic from the wireless network. But if I tcpdump -ni en0, I don't see any DHCP traffic from the QEMU guest OS. Any ideas? Update 1: I tried sudo defaults write "/Library/Preferences/SystemConfiguration/com.apple.Boot" "Kernel Flags" "net.inet.ip.scopedroute=0" and rebooting per this mailing list suggestion, but this didn't help. In fact, it made VirtualBox bridged mode stop working.

  Read the article

• (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

  - by mschr

  My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

  Read the article

• Inconsistent DHCP replies with Windows 2008R2 DHCP server

  - by verbalicious

  I've got a Windows 2008R2 standard server running DHCP services. We've noticed that certain clients are receiving inconsistent DHCP replies. We have over 175 Windows workstations in this VLAN that don't seem to have trouble getting DHCP leases. However, PXE-booting clients trying to reach our DHCP server are able to get a lease inconsistently. Additionally, we tried using the "dhcping" tool against our DHCP server and found that roughly two of every three requests time out with "no answer" -- and this holds true when we set the timeout value on dhcping to 20seconds. After a failed attempt, however, we may get a dhcp lease reply immediately with dhcping. This leads me to believe that this issue isn't confined to PXE booting clients, but something more systemic with my LAN layer2 or DHCP. And that possibly my 175 windows clients are experiencing this in some form without my knowledge. We have over 30% of our scope available so the addresses are there. I was unable to find anything in the Windows server "DHCP-Server" log. Of course, my goal is to have my DHCP server reply to every request that it receives on the LAN!

  Read the article

• fedora, dhcpd fails to start

  - by soxs060389

  History: I got a tiny shiny plugserver which I want to plug to my ADSL router (or however you want to call it) on one end (eth0), and the other end (eth1) I want to run a dhcp server for my LAN. ATM I am stuck with getting LAN to work. OS is fedora 12. I configured my /etc/dhcp/dhcpd.conf like this: # # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "unknown.org"; option domain-name-servers 192.168.44.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.44.255; default-lease-time 86400; max-lease-time 172800; subnet 192.168.44.0 netmask 255.255.255.0 { host fedorabigbox { hardware ethernet 00:19:66:8E:61:74; fixed-address 192.168.44.21; } #host mobile #{ # hardware ethernet ***; # fixed-address 192.168.44.22; #} range 192.168.44.100 192.168.44.110; option routers 192.168.44.1; } # this is just dummy, as read many howtos, some suggesting to add a subnet blah netmask blah for each interface subnet 192.168.33.0 netmask 255.255.255.0 { range 192.168.33.100 192.168.33.110; option routers 192.168.33.1; } But the server fails to start when trying to start it via /etc/init.d/dhcpd start In general it would be nice if someone can point me to a in detail explanation of how network works, I am pretty new to this stuff. More concrete question: How to point the subnets to eth1 and the other to eth0, how can this be achieved? Does someone see any errors or flaws? Syntax should be correct, allready checked that with the dhcpd syntax check. Thanks for any help

  Read the article

• ADSL Modem/Router sometimes hands out incorrect IP addresses

  - by Peter Keevill

  My setup is as follows:- Main ADSL modem / router (switch) configured as DHCP server with address range 192.168.0.25-60 The office machines are configured with fixed IP ( not in the same address pool of course ) and hard wired to this router. A wireless access point ( Router ) is connected to provide Internet access for guests in a separate area. This router is NOT configured as a DHCP server. Wireless authentication is turned off. IP address lease times are set to 4 hours. Sometimes guests are able to connect to the wireless access point but they are not given a valid IP. They get 169.x.x.x addresses. Rebooting their machines does not resolve the problem. The only way to resolve is to reboot the main ADSL/router which is often frustrating for other users who are successfully connected with valid IP and DG. The problem seems to occur more frequently to Apple/Mac guests although it also sometimes occurs with Win machines. I personally use Ubuntu on my Laptop and thus far, never have had any problem connecting and getting a valid IP address in the guest area. One further point of note which may give a clue is that certain guests ( always Apple/Mac ) get lease times of 90 days. However, this does not 'stack out' the number of available addresses and of course, rebooting the router clears them until the next time they login.

  Read the article

• Connect to Nonencrypted Wireless Network Using Ubuntu Commands

  - by Tim

  I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

  Read the article

• One Windows Domain workstation can ping gateway but gets no internet access

  - by dindeman

  One of the (Windows XP SP3) workstations of our Windows Domain could not access internet anymore, this problem suddenly happened overnight. The domain controllers (there are three of them) are all running Windows Server 2008. First I compared the output of ipconfig /all on the faulty workstation with the output of a working workstation and it was just fine as it had always been. In particular the default gateway was correct and always remained pingable from the faulty workstation. I guessed that something was wrong with the DHCP service and I restarted the DHCP server service on all of our three DCs as well as the DHCP client service on the faulty workstation. This didn't solve the issue. I then thought of renewing the DHCP lease with ipconfig /release and ipconfig /renew and here is my first question: why did this never work? The same IP address (192.168.0.45) kept being assigned despite all my attempts to renew it (note that all our workstation are getting their TCP/IP automatically.) Even by leaving the domain and changing the computer name the same address was yet again obtained... Anyway I then proceeded to switch the TCP/IP configuration for that machine manually to another free valid IP address (192.168.0.41)... and then the internet access came back! I then cleared any traces of the previous IP in the DHCP leases list and in the DNS tables of our DCs and, after setting back the TCP/IP configuration to 'automatic', finally, the new lease would be granted (192.168.0.41) alongside with the internet access. My second question: what went suddenly wrong with the original IP address?

  Read the article

• Web service for checking out / leasing a token

  - by JP Slavinsky

  I run a web site on AWS that has a number of web servers (say 4 of them) running behind a load balancer. For this particular web site, I have one license key of New Relic for doing instrumentation. At any one time, I only want one of the 4 web servers to be using the key. If that server goes offline, I want one of the remaining web servers to be able to begin using the license key. Does anyone know of a service that would let me manage this process? The service would not particularly need to store the key itself but rather just manage the fact that only one web server can lease out the right to use the key at any time. Something where the web servers would have to come back every few minutes and renew their lease, and if they don't it becomes available to someone else. I just realized I could maybe accomplish a hacked version of this using a file on S3, but that doesn't prevent race conditions / etc and is definitely hackish. Any thoughts welcome. FWIW, this site is built on Ruby on Rails. Thanks! JP

  Read the article

• Windows 7 computer apparently connected to working wireless network but can't access router page or internet

  - by Hemmer

  I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

  Read the article

• How can I assign DHCP leases from a script?

  - by devicenull

  I have an environment where there is one DHCP server servicing a number of different hosts/vlans. The switches are configured to forward the DHCP requests over (via ip-helper) and include information about the port (option 82). I'd like to take that information and translate it into an actual lease for the server. I don't think it's particularly feasible for me to pregenerate a list of available leases, but I should be able to determine an address for a lease as it comes in. Is there an DHCP server that can execute a script when it receives a request? (Note: I'm looking to assign the IP from the script, not have the DHCP server assign an IP then execute the script) Edit: So, ultimately I'm trying to provide DHCP/PXE services over a large number of distinct vlans. This is so we can do OS installs via PXE booting without having to have a separate PXE vlan. I've got the switch config down no problem, and I have the DHCP server recognizing option 82. I need a way to pull DHCP assignments from another system (this other system would know what subnet to use on what vlan), but I do not want to have to pregenerate a list of vlan:DHCP range pairs.

  Read the article

• ?11gR2 RAC???ASM DISK Path????

  - by Liu Maclean(???)

  ????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are  allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs  CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH?????????, ???????????????,????!

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >