Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 312/444 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Problem connecting to MySQL with zend

  - by wheresrhys

  I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• Access my mac's local server from a windows machine

  - by Simon Davies

  I am running my test sites on my mac, but I would like be able to use my windows machine to also access this server and be able to write / read fiels form this server. I can access my sites on my windows by using the IP address 192.168.1.???. But I would like to be able to use my windows machine to also access the fiels and edit them. Any ideas much appreciated. Some details: Mac OSX SL file sharing set to on. Windows 7 (tried setting up network map using afp://192.... but nothing) Both machines are connected to a local network, with several other machine (windows) Thanks

  Read the article

• dig and dig -x are answering different

  - by erdemkeren

  I don't want the name provider to manage my records. I want to handle it myself. So I installed bind9 and made some configurations reading some articles and following some examples. bind didn't show any error after I created/edited the required files but; When I write `dig www.foo.com, I see the IP of the advertisement page of my name provider. But when I write dig -x server_ip_address; I see the name I purchased. What am I doing wrong? Can't a server be the nameserver of it's own? Is it a must to configure the records from the company I bought the name from? By the way, I realised that, my previous question was not clear, I deleted it, and asking the same question in a different way.

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system?

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• Setting up WAMP to run on a LAN

  - by Steve

  I've installed WAMP on a Windows 7 PC, and it is running fine locally, as localhost. I want PCs on the LAN to be able to view the local server. When they load my PC's IP address in their browser, they receive a "You don't have permission to access / on this server" error. I followed this guide, but the issue remains. To recap: I've added an inbound exception to Windows Firewall for port 80 for Private and Domain connections. I've edited Apache's httpd.conf to include: Listen 80 Listen 192.168.0.5:80 < Directory "c:/wamp/www/wordpress/" allow from all < /Directory I've edited httpd-vhosts.conf to include: < VirtualHost 192.168.0.5:80 DocumentRoot "C:/wamp/www/wordpress" < /VirtualHost Any ideas?

  Read the article

• Squid throws error, The requested URL could not be retrieved

  - by Supratik

  Sometimes I am getting the following error The requested URL could not be retrieved While trying to retrieve the URL: http://groups.google.com/ The following error was encountered: Unable to determine IP address from host name for groups.google.com The dnsserver returned: Refused: The name server refuses to perform the specified operation. This means that: The cache was not able to resolve the hostname presented in the URL. Check if the address is correct. Your cache administrator is root. What could be the reason for the above error ? Regards Supratik

  Read the article

• Connect to MySql on other machine on LAN

  - by Ankur Sachdeva

  I am facing problem with connecting MySql database on the other machine on the same network. Could not connect to the specified instance. MySql error number 1130 Host 'abc' is not allowed to connect to this MySql server (Pinging ok time 1-3 ms ttl =128) I have check out the followings: Tcp/IP enabled RegEdit under hlocal machine .... parameters .. maxUserpORT And timedelay.. Grant all . to 'root'@'Myipaddress' please help to the earliest..

  Read the article

• Blocked connections passing through firewall. What is wrong?

  - by Kiranu

  In our company we have a small business router (Cisco RV082) on which we are using its standard configuration (block all incoming traffic). We also have an SMTP relay configured (using WS2008R2) so that our internal applications can send email through google apps (which requires authentication). The thing is that the server was being used to send spam. We fixed the problem by only allowing the server to relay email from our internal IP address range (10.0.0.0/16). My concern is that there was a way by which external IPs connected to the network and that underlying problem has not been fixed, but I cannot imagine how these machines connected. Any thoughts?

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• How can I access an Apple Xserve with no I/O ports

  - by DigitalJedi805

  I have an Apple Xserve at my place of employment, that I stumbled across one day going through some old equipment. The Xserve has one card installed on it, being the NIC, and is labelled with the static IP adresses that it has assigned, but other than that it is totally 'headless'. I would like to put it to use ( by either rolling it over to a Linux, or Windows Server 08 environment... 0_o ) but have yet to figure out how to get into the system to manage it. I'm a frequent at StackOverflow, but this is my first SuperUser post, so please let me know if this should be on one of the affiliate sites.

  Read the article

• VirtualBox "Bridged Adapter" when host NIC is turned off

  - by chris_l

  Hi, I'm running Linux (Debian Etch) in a VirtualBox VM on my MacBook. I usually ssh from my Mac terminal to the guest machine. I also want to access the internet from my guest, so I set up my host's WLAN card (en1) as a bridged adapter for eth0 on the client. This works fine, but when I turn off the WLAN card (e.g. to reduce battery consumption), I'd still like to ssh from my host to the guest. This fails of course, because en1 loses its IP address. Is a bridged adapter the best option for what I want to do? How can I make it work? (A simple "ifconfig en1 add 10.0.0.4" didn't do the trick...) Thanks Chris

  Read the article

• Git and Amazon EC2 public key denied

  - by MrNart

  I had git working before on /var/html/projectfolder and realized it was a security risk so I made a new folder /projects from the root folder and tried to replicate what I did and now it doesnt work. Here is the backlog of what I did for my local machine and EC2 - server Server-EC2 1.I added my public key to the authorized_user file in ~/.ssh folder 2.Create a bare repository git init --bare 3.Change folder permissions to sudo chgrp -R ec2-user * sudo chmod -R g+ws * Local Machine create a local repository with git init touch, add, commit readme file pointed origin master to ec2 via git remote add origin ssh://ec2-user@remote-ip/path/to/folder This is my output: Permission Denied (publickey) fatal: The remote end hung up unexpectedly

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Active node stops resources when pasive node is shutdown

  - by Wakaru44

  2 nodes, active/pasive. 2 resources, a virtual ip, openLdap, and the nfs mount where openldap saves the data. When both nodes are up, things worked fine. You could move resources away and put the active in stanby. But when i rebooted the passive node, ( with the resources in the active node), and the passive node loses conectivity, all the resources in the active where stopped by pacemaker. I'm reading the documentation right now, but I just need a little quick tip to figure what could be hapenning here. Im using: corosync pacemaker RHEL 6

  Read the article

• Mikrotik queues and limiting total upstream bandwidth

  - by g18c

  With a Mikrotik router (form of embedded Linux) I have created simple queues per machine matched by source IP address. Each of the 4 machine queues has an unlimited burst 3Mbps/3Mbps for Tx/Rx. During speedtest.net on all 4 machines at the same time, each machine shows 3Mbps (and is limited correctly there), however the total bandwidth on the uplink goes to 12Mbps (i need to set this to 10Mbps max for the upstream). I want to restrict the actual traffic passing across the uplink port to 10Mbps regardless of what the other queues are doing (I need this catch all queue to have the final say on the uplink speed). For example I need: Scenario A Machine A transferring @ 3Mbps Machine B transferring @ 3Mbps Machine C transferring @ 3Mbps Machine D transferring @ 0Mbps Up-link speed = 9Mbps Scenario B Machine A trying to transfer @ 3Mbps Machine B trying to transfer @ 3Mbps Machine C trying to transfer @ 3Mbps Machine D trying to transfer @ 3Mbps Up-link speed = 10Mbps Actual transfer speed of machine A,B,C,D = 2.5Mbps This is to allow slight over subscription of bandwidth queues as not all will be transmitting at 3Mbps all the time. Is this possible and if so how would one go about doing this?

  Read the article

• Changing shared printer settings to default to greyscale

  - by Chris

  My company has about 60 employees all running Windows Vista or 7 and a gigantic Minolta printer hooked up to an EFI Fiery Image Processor. We're burning about $300 a month in printer supplies alone. I'm trying to find a way to cause the printer to default to grayscale in order to save money. So far I've tried: Changing settings on the image processor Changing settings on the print server Looking through the Group Policy editor to see if I can find anything useful Creating a new printer on the print server and setting it to be grayscale only Adding the printer to my computer directly (through a TCP/IP port) and setting it to be greyscale only Has anybody successfully done this before? If so, how was it gone about? I don't expect anybody to know the specifics of my environment, I just not sure what the right direction is.

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Configuring BIND to use VM's DNS for specific domain

  - by Srirangan

  I work on a project for which I use an Ubuntu server vm on an Ubuntu host. The VM runs all the services / webapps through haproxy and nginx and serves it on the domain (xyz.com). I manually modify my resolv.conf to use the VMs IP address as the nameserver and I can run my app on the host browser. The problem is I am modifying an auto-generated file (resolv.conf) and I need to do it each time. Is there a smart way to say: -- are you accessing xyz.com? -- if yes use VM's DNS server, else use the hosts

  Read the article

• Appropriate Network switch for small server cluster

  - by Chris Dutrow

  Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• OS X clients ignoring Windows print server permissions

  - by Ilumiari

  I'm in the process of testing a Windows Server 2008 R2 print server for a mixed OS X/Windows environment. Any security permissions (AD groups) I set for the printers on the print server are not honoured by the OS X clients. Only if I remove absolutely all permissions for a given printer will an OS X client not print to that printer. The Windows clients honour the permissions as expected. The PrintService log doesn't record any activity when an unprivileged Windows client attempts to print, and records a typical print job when an unprivileged OS X client attempts to print. Has anyone encountered this problem before and have a fix? With 600-700 clients, a number of which are dual-booting, restricting by IP address is not viable. EDIT: The jobs are definitely going through the print server, they show up in the logs with their AD credentials.

  Read the article

• One EC2 source with distributed varnish machines

  - by Elad Lachmi

  I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

  Read the article

• Web service not accessible from behind corporates firewalls - how come?

  - by Niro

  We run a Saas serving a widget which is embedded in customer websites. The service include static javascript code hosted on amazon S3 and dynamic part hosted on EC2 with Scalr (using scalr name servers). We received some feedback from users behind corporate firewalls that they cant access our service (while they can access the sites including the widget). This does not make sense to me since the service is using normal http calls on port 80 and our URL is quite new without any reason to be banned by firewalls. My questions are: 1. Why is the service is not accessible and what can I do about it? 2. Is it possible that one of the following is blocked by corporate firewalls: Amazon s3, the dynamic IP address provided by amazon, Scalr name servers. Any other possible reasons, way to check them and remedies for this? Thanks!

  Read the article

• Running Multiple sites with multiple domains apache

  - by PsychoData

  I am having a rough time running apache and using multiple domain names here is a snippet of my config file. I keep getting a error saying that NameVirtualHost has no VirtualHosts. I want them both running on the same IP and I'm not sure why this doesn't work. I've been digging through the documentation for VirtualHosts, NameVirtualHost, and apache's page about name based virtual hosting. That example in the name based page is almost exactly my config! What am I doing wrong? Listen *:80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.sample1.net DocumentRoot /var/www/sample1-net </VirtualHost> <VirtualHost *:80> ServerName www.example2.net DocumentRoot /var/www/example2-net </VirtualHost>

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >