Search Results

Search found 9634 results on 386 pages for 'proxy pattern'.

Page 314/386 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• Integrated Graphics went kaput, can I switch to dedicated graphics if I can't get into the BIOS

  - by Om Nom Nom

  I have an 8 year old computer (Pentium 4 1.6 GHz, 256 MB DDR RAM) which is not turning on (it beeps for 10 seconds and then goes off). Nothing appears on the screen, so I can't get into the BIOS. A computer repair person listened to the beeping pattern and told me that its because of the integrated graphics on the motherboard is defective. It's an ASUS P4S333-VM motherboard and the graphics solution is SiS 650. He tried putting in a PCI graphics card expecting that the computer will use that instead and ignore the integrated graphics, but apparently older computers don't switch automatically to the dedicated graphics card; it needs to be changed from the BIOS. But, I can't get inside the BIOS settings as I already said. I am told that the only option now is to replace the motherboard (which is not feasible since it's very old now). So, is there any way to make the computer use the PCI graphics card? IIRC, the motherboard also has an AGP port, but I think that it will also need to be selected from the BIOS?

  Read the article

• Where to place Nginx IP blacklist config file?

  - by ProfessionalAmateur

  I have an Nginx web server hosting two sites. I created a blockips.conf file to blacklist IP addresses that are constantly probing the server and included this file in the nginx.conf file. However in my access logs for the sites I still see these IP addresses showing up. Do I need to include the black list in each site's conf instead of the global conf for Nginx? Here is my nginx.conf user nginx; worker_processes 1; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; include /etc/nginx/conf.d/*.conf; # Load virtual host configuration files. include /etc/nginx/sites-enabled/*; # BLOCK SPAMMERS IP ADDRESSES include /etc/nginx/conf.d/blockips.conf; } blockips.conf deny 58.218.199.250; access.log still shows this IP address. 58.218.199.250 - - [27/Sep/2012:06:41:03 -0600] "GET http://59.53.91.9/proxy/judge.php HTTP/1.1" 403 570 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" "-" What am I doing incorrectly?

  Read the article

• Spots appear in a rectangle area on screen, ubuntu gnome 13.04, nvidia driver

  - by frozen-flame

  I am using Ubuntu Gnome 13.04 with nvidia-310 driver installed. My GPU is GeForce GTX650. Strange spots freqently appear on screen, with following traits: Spots are restricted in one or two rectangle areas at any instant. When typing, the pattern of spots change. Possibly increase, or all disappear when one key pressed. Mouse movement also influences. This problem last within one boot. The only way can I get rid of this problem is to reboot. It can be detected as soon as entering desktop if it appears. Simultaneously, the "power off" option is lost in the top-right menu of Gnome3. Never such problem when using windows 7 on the same computer, neither ubuntu with Nouveou driver. Seldomly, half of the screen become black. I googled a lot. Similar conditions are described, but no confirmed solution. Uninstall-r einstall strategy does not work. Any clue solving this will be appeciated.

  Read the article

• Users database empty after Samba3 to Samba4 migration on different servers

  - by ouzmoutous

  I have to migrate a Samba 3 to a new Samba 4 server. My problem is that the database on the samba 3 server seems a bit empty. The secrets.dtb file is only 20K whereas the “pbedit -L |wc -l”command give me 16970 lines. On my Samba3 /var/lib/samba is 1,5M After I had migrate the databse (following instructions on http://dev.tranquil.it/index.php/SAMBA_-_Migration_Samba3_Samba4), “pdbedit -L” command on the new server give me only : SAMBA4$, Administrator, dns-samba4, krbtgt and nobody. So I tried to create a VM with a Samba3. I added some users, done the same things I did for the migration and now I can see the users created on the VM. It’s like users on the Samba 3 server are in a sort of cache. I already migrate the /etc/{passwd,shadow,group} files and I can see users with the “getent passwd” command. Any ideas why my users are present when I use pdbedit but the database is so empty ? The global part of my smb.conf on the Samba 3 server : [global] workgroup = INTERNET netbios name = PDC-SMB3 server string = %h server interfaces = eth0 obey pam restrictions = Yes passdb backend = smbpasswd passwd program = /usr/bin/passwd %u passwd chat = *new* %n\n *Re* %n\n *pa* username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%U max log size = 1000 socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 add user script = /usr/sbin/useradd -s /bin/false -m '%u' -g users delete user script = /usr/sbin/userdel -r '%u' add group script = /usr/sbin/groupadd '%g' delete group script = /usr/sbin/groupdel '%g' add user to group script = /usr/sbin/usermod -G '%g' '%u' add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null '%u' -g machines logon script = logon.cmd logon home = \\$L\%U domain logons = Yes os level = 255 preferred master = Yes local master = Yes domain master = Yes dns proxy = No ldap ssl = no panic action = /usr/share/samba/panic-action %d invalid users = root admin users = admin, root, administrateur log level = 2

  Read the article

• Widespread misinterpretation of DNS rules in resolving wildcards

  - by Dominic Sayers

  [EDITED to add: This problem has gone away on its own. I believe Cloudflare's name resolution may have been to blame. See my own answer below] Here is a snippet of my zone file *.example.com. 300 IN CNAME proxy.herokuapp.com. foo.example.com. 300 IN A 111.111.111.111 If I dig @8.8.8.8 foo.example.com I get the answer I expect: ;; ANSWER SECTION: foo.example.com. 30 IN A 111.111.111.111 The same is true of all other public DNS servers I've tried. However, when I try to set up a check with Pingdom to a URL on foo.example.com it instead sends the traffic to my Heroku app referenced by the *.example.com RR. The same is true of checks set up on New Relic, Errplane and traffic generated by the Heroku app itself. So on the one side, all public DNS servers interpret the zone file one way. Yet four service providers all interpret it a different way, one that differs to the standard suggested by RFC 4592. My question is: are these reputable, mature service providers all wrong? Or is it little me?

  Read the article

• Load Sharing Regarding Large Websites

  - by JHarley1

  Hello, I have a question regarding Load Sharing for large websites. My Understanding: So if you have a website that has millions of fits a day you will need to have an architecture that can support this sort of pressure. You can either do one or two things: Invest in a single large server that has huge amounts of processing power, memory and storage (such as Microsoft's TerraServer). Spread the load of your website across a number of machines. Let me tackle the second approach, so you have a collection of machines all running Web Server Software and all having access to identical copies of the websites pages. You can either spread the load across these machines using a cyclic pattern in a DNS or you can use a Load Ballancing Switch. The advantages of this approach is: - Redundancy - servers can fail and the others would "pick up the slack" - Incremental - the ability to easily add new machines to this set-up. My Question's Is there a Virtual approach to this issue of load balancing now? If the website runs from a database - is there still only a single copy of the database? If a user had a session running on one Server (e.g. they had gone to www.example.org and had been assigned to Server 2 - were they had created a session) if they refreshed the website (and were allocated Server 3) would they still have their session? What are the other disadvantages associated with Load Balancing? Many Thanks, J

  Read the article

• One server running Django (with Nginx and Apache) and Wordpress Blog

  - by JCWong

  I have nginx listening to port 80 for my primary site foo.com. It proxys to port 8080 which is where the Django app lives server { listen 80; server_name www.foo.com foo.com; access_log /home/jeffrey/www/ddt/logs/nginx_access.log; error_log /home/jeffrey/www/ddt/logs/nginx_error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/jeffrey/www/ddt/; } location /static/ { root /home/jeffrey/www/ddt/; } location /public/ { root /home/jeffrey/www/ddt/; } } I'd like to have a wordpress blog run on the same server. Apache is listening to port 8080 with this http.conf file NameVirtualHost *:8080 WSGIScriptAlias / /home/jeffrey/www/ddt/apache/ddt.wsgi WSGIPythonPath /home/jeffrey/www/ddt <Directory /home/jeffrey/www/ddt/apache/> <Files ddt.wsgi> Order deny,allow Allow from all </Files> </Directory> I added my Wordpress site using a virtualhost <VirtualHost *:8080> ServerName www.bar.com ServerAlias bar.com DocumentRoot /home/jeffrey/www/jeffrey_wp </VirtualHost> When I go to bar.com I still see my django app. Is it possible for these two sites to run on the same server?

  Read the article

• Bluehost Emails Getting Blocked

  - by colithium

  A site for my client has the run-of-the-mill "website with users" email pattern. Create an account, get an activation email. Get an email when a subscription is expiring, etc. The site is hosted on Bluehost and currently it uses php's mail() function. There isn't much configuration that is allowed (as far as I know). The trouble is, about a third of these emails disappear into the void. They aren't in spam or junk folders, there's no bounce message, they just cease to exist. I've read about Bluehost email troubles but I can't figure out what my options are for fixing it. These aren't marketing emails, ie they have user-specific information contained within them. I suppose if a solution offers a good templating system that would be fine. What are my options? Excerpt of headers when delivered to a Gmail address: Received-SPF: neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) client-ip=00.000.000.000; DomainKey-Status: good Authentication-Results: mx.google.com; spf=neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) smtp.mail=domain@box###.bluehost.com; domainkeys=pass [email protected]

  Read the article

• ASA Slow IPSec Performance with Inconsistent Window Size

  - by Brent

  I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremely poor performance when traffic passes over the IPSec VPN. CPU on the devices is ~13%, Memory at 408 MB, and active VPN sessions 2. The load on both of the the devices is particularly low. Latency between the two sites is ~40ms. Screenshot of wireshark file transfer between the two hosts over the firewall IPSec VPN performing at 10MBPS. Note the changing window size. http://imgur.com/wGTB8Cr Screenshot of wireshark file transfer between the two hosts over the firewall not going over IPSec performing at 55MBPS. Constant window size. http://imgur.com/EU23W1e I'm showing an inconsistent window size when transferring over the IPSec VPN ranging in 46,796 to 65535. When performing at 55+MBPS, the window size is consistently 65,535. Does this show a problem in my configuration of the IPSec VPN in the ASA or a Layer1/2 issue? Using ping xxxxxx -f -l I finally get a non-fragment at 1418 bytes so 1418+28 for IP/ICMP headers = 1446. I know that I have 1500 set on the ASA and Ethernet. I do have "Force Maximum segment size for TCP proxy connection to be" "1380" bytes set under Configuration Advanced TCP Options on the ASA. Using IPERF, I am getting a "TCP Window Full" every few seconds and ~3 MBPS performance. http://imgur.com/elRlMpY Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

  Read the article

• Web based file search in the lan?

  - by Magnetic_dud

  I would like to search files in my lan easily. (over 500k files on SMB shares, it would take ages with other ways) I mean, i just need to do a quick search on file names, i don't care content indexing at all, as most of my files are in a proprietary format, and the file name is explicative enough. But, date range filters are a must for me. I just need a quick search like voidtools' everything can do, but in a network way The files are on a WHS box (lol, Videos and Music share names are not appropriate for a company, but a license for that win2003-based os is cheaper than an xp home one!) I tried: Lansearch pro: it is not good for me, as i need a quick index Network Search Engine: it would be perfect, but does not offer a date range filter Microsoft Search Server 2008 Express, but it is horrible! First, does NOT index filenames, and then, my Core2Duo is not powerful enough to run it smoothly. Google Desktop with a proxy on localhost to make it run on the lan, but i don't like the hacked result. The preinstalled Windows Search 4.0 but it sucks totally in choosing the relevance of data - uninstalled Docco... what's that? I am considering to try: Ibm omnifind DocFetcher (can it work as a client? did not investigated yet) Strigi (it looks like that it can work as a client, right?) Any ideas/suggestions?

  Read the article

• linux + create host file from CSV file by sed or awk or perl

  - by yael

  I have the following CSV file this file defined which Linux machine exist in the system and there ip's my target is to create host file from this file please advice how to create host file as example 1 from my CSV file ( I need to match the IP address from CSV file and put it on the first field of the host file , then match the LINUX name and locate this name in the sec field – as example 1 ) remark - should be performed by sed or awk or perl .. , I need to write the solution in my bash script CSV file , machine , VM-LINUX1 , SZ , Phy , 10.213.158.18 , PROXY , VM-LINUX2 , SZ , 10.213.158.19 , OLD HW , VM-LINUX3 , SZ , 10.213.158.20 , , VM-LINUX4 , SZ , Phy , 10.213.158.21 , , VM-LINUX5 , SZ , Phy , OUT , EXT , LAN3 , 10.213.158.22 , INTERNAL , VM-LINUX6 , SZ , Phy , 10.213.158.23 , , server , new HW , VM-LINUX7 , SZ , Phy , 10.213.158.24 , OUT, LAN3 , VM-LINUX8 , SZ , 10.213.158.25 , OLD HW , machine , VM-LINUX9 , SZ , Phy , INT , 10.213.158.26 , LAN2, AN45, , VM-LINUX10 , SZ , Phy , 10.213.158.27 , , VM-LINUX11 , SZ , Phy , LAN5 , 10.213.158.28 , example 1 ( host file ) 10.213.158.18 VM-LINUX1 10.213.158.19 VM-LINUX2 10.213.158.20 VM-LINUX3 10.213.158.21 VM-LINUX4 10.213.158.22 VM-LINUX5 10.213.158.23 VM-LINUX6 10.213.158.24 VM-LINUX7 10.213.158.25 VM-LINUX8 10.213.158.26 VM-LINUX9 10.213.158.27 VM-LINUX10 10.213.158.25 VM-MACHINE8 10.213.158.26 STAR9 10.213.158.27 TOP10 10.213.158.28 SERVER11

  Read the article

• HAProxy "503 Service Unavailable" for webserver running on a KVM virtual machine

  - by Menda

  I'm setting up a server with KVM (IP 192.168.0.100) and I have created inside of it one virtual machine using network bridging at 192.168.0.194. This virtual machine has an nginx instance running, which I can access from the server or from any computer computer in the internal network just typing in the browser http://192.168.0.194. However, I try configure HAProxy in the same server that hosts KVM and looking the status page of HAProxy it always shows the virtual machine as "DOWN". If I try from the server http://localhost, it should be the same than if I go to http://192.168.0.194. My goal is to build a reverse proxy, but I tried this little example and won't work. What am I doing bad? This is my config file in the server: # /etc/haproxy/haproxy.cfg global maxconn 4096 user haproxy group haproxy daemon defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen ServerStatus *:8081 mode http stats enable stats auth haproxy:haproxy listen Server *:80 mode http balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /check.txt HTTP/1.0 server mv1 192.168.0.194:80 cookie A check Thanks.

  Read the article

• Apache2 - Hosting two sites on the same domain with different ports

  - by user1026361

  I am hosting a staging site (test.mydomain.com) which currently work well on port 80 for two sites (test.mydomain.com and test.FRmydomain.com) I am working on a new backend and I would like to deploy a third site on this server for testing. My hope is that it will live at test.mydomain.com:4204. I've got some experience with apache and quickly added statements: Listen 4204 NameVirtualHost *:4204 and created a new config for my site. What I imagine are the relevant parts of my config: <VirtualHost *:4204 > ServerAdmin [email protected] ServerName test.mydomain.com:4204 However, the site is not publicly available, by name or ip. If i curl localhost:4204 from the server, I get the expected page content At this point, I'm a bit of a loss on how to go forwards. It seems like my config is correct but not available to be served. Am I better off defining a proxy definition so that, for instance: test.mydomain.com/4204 proxies to my localhost server or is there a way to make the site available via the internet? EDIT: I have added an iptable rule after further Googling with the command: iptables -I INPUT -p tcp --dport 4204 -j ACCEPT I can see apache listening on 4204 and the rule is definitely in place but cant reach the site

  Read the article

• Why do I often have to refresh pages I navigate to once for them (or content in them) to load?

  - by GetOutOfBox

  I have noticed a bizarre pattern when using my PC, that when I open a link to a website, it often will often take a very long time to load, or time out. Sometimes content on the website will be drawn, but again, it seems to get "stuck" for an unusual amount of time before finishing. Most affected is Youtube; almost every time I navigate to a youtube video from another website such as Google, the video will not begin playing, but will instead just display the player controls with a black screen where the video should be and the buffering symbol, usually before displaying an error such as "The video failed to load". The unusual part of this problem is that whenever this happens, refreshing the page always causes it to load almost immediately the second time around, without any problems. Note that I'm not talking about how some browsers will dump whatever has been cached to the "pallet" briefly when the page is refreshed or loading stopped; but that the second time loading the website being faster. I have done my best to rule out some of the obvious causes: My Windows 7 desktop computer is the only device that seems to be affected. I use Firefox on it (latest version, flash updated, etc). My connection has more than enough bandwidth (30 megabits down, 4 up), and I've even tried QoSing all other devices to make sure this isn't happening due to usage spikes. Wireshark is not showing any clearly unusual network activity (i.e frequently dropped packets).

  Read the article

• Squid with mikrotik router

  - by niren

  I tried to connect squid3 in my network to use high anonymity proxy. This is how my network is right now WAN LINK | ------------- ----------------------------- | Mikrotik Box | | Ubuntu Server with squid3 | ------------- ----------------------------- | / | / ---------------------- | Switch ( Cheap one ) | ---------------------- | | | Client1 Client2 Client3 etc. after this setup I changed squid.conf in Ubuntu server as http_port 8080 acl localhost src xxx.xxx.xxx.xxx(Ubuntu server IP) acl to_localhost dst xxx.xxx.xxx.xxx(Mikrotik router gateway) I assume that redirected http from Mikrotik router will be redirect again to Mikrotik router. uncomment access log /var/log/squid3/access.log add visible_hostname myname save squid.conf and restart squid3 server. Then I have added nat rule in Mikrotik router ip/firewall/nat 1. add chain=dstnat src_address=xxx.xxx.xxx.xxx(ununtu server IP) dst-port=80 protocol=tcp action=accept 2. add chain=dstnat src_address=xxx.xxx.xxx.xxx/28(LAN address) dst-port=80 protocol=tcp action=dst-nat to-address=xxx.xxx.xxx.xxx(ununtu server IP) to-port=8080 now I can not able to access internet from client1 system, If I remove these two nat rule then I can access internet. what is wrong I have made?

  Read the article

• Installing mod_pagespeed (Apache module) on CentOS

  - by Sid B

  I have a CentOS (5.7 Final) system on which I already have Apache (2.2.3) installed. I have installed mod_pagespeed by following the instructions on: http://code.google.com/speed/page-speed/download.html and got the following while installing: # rpm -U mod-pagespeed-*.rpm warning: mod-pagespeed-beta_current_x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 7fac5991 [ OK ] atd: [ OK ] It does appear to be installed properly: # apachectl -t -D DUMP_MODULES Loaded Modules: ... pagespeed_module (shared) And I've made the following changes in /etc/httpd/conf.d/pagespeed.conf Added: ModPagespeedEnableFilters collapse_whitespace,elide_attributes ModPagespeedEnableFilters combine_css,rewrite_css,move_css_to_head,inline_css ModPagespeedEnableFilters rewrite_javascript,inline_javascript ModPagespeedEnableFilters rewrite_images,insert_img_dimensions ModPagespeedEnableFilters extend_cache ModPagespeedEnableFilters remove_quotes,remove_comments ModPagespeedEnableFilters add_instrumentation Commented out the following lines in mod_pagespeed_statistics <Location /mod_pagespeed_statistics> **# Order allow,deny** # You may insert other "Allow from" lines to add hosts you want to # allow to look at generated statistics. Another possibility is # to comment out the "Order" and "Allow" options from the config # file, to allow any client that can reach your server to examine # statistics. This might be appropriate in an experimental setup or # if the Apache server is protected by a reverse proxy that will # filter URLs in some fashion. **# Allow from localhost** **# Allow from 127.0.0.1** SetHandler mod_pagespeed_statistics </Location> As a separate note, I'm trying to run the prescribed system tests as specified on google's site, but it gives the following error. I'm averse to updating wget on my server, as I'm sure there's no need for it for the actual module to function correctly. ./system_test.sh www.domain.com You have the wrong version of wget. 1.12 is required.

  Read the article

• Can't connect to research.microsoft.com on home Qwest DSL connection

  - by rakingleaves

  I have a puzzling issue regarding accessing research.microsoft.com from my home Qwest DSL connection. By default, I frequently get timeouts when accessing research.microsoft.com from Firefox, Safari, or Chrome on my Mac. I also cannot access the site from Internet Explorer in a Windows VM. However, I am able to access the site through proxify.com, so I know the site is not down. Furthermore, I haven't noticed problems accessing other sites (in particular, www.microsoft.com works fine). Also, I can access research.microsoft.com when I'm connected to networks other than my home Qwest DSL connection. Together, the above make me suspect a problem with either my router (Airport Express) or, more likely, my ISP. Anyone have any thoughts on how I can narrow down the problem further? I could call my ISP and tell them the above, but my feeling is that probably won't get me very far. I can get by browsing research.microsoft.com through a proxy, but it would be nice to figure out what's going on here and fix the problem. Oh, the only relevant discussion I found via Google was here: http://forums.whirlpool.net.au/forum-replies-archive.cfm/1311734.html Update: Thanks to those who have tried to help! I found one other thing while Googling that may be vaguely relevant: http://thedaneshproject.com/posts/supportmicrosoftcom-not-working-behind-squid/ Disabling the Accept-Encoding headers in Firefox actually didn't make a difference for me. I just thought the above might spark some other ideas about how mishandling of HTTP headers somewhere might be causing this problem. Thanks again! Another update: In case anyone is still thinking about this; I've found that I can't surf research.microsoft.com using the links text-based browser, but I can reliably download individual files with wget. Maybe that helps?

  Read the article

• pptpd-logwtmp.so config wrong ip address

  - by rgc

  i have setup a pptp vpn on ubuntu 10.04, and i config local ip address , remote ip address as following: local IP address 10.0.30.100 remote IP address 192.168.13.100 after i use windows to connect to vpn server in windows , i only could send packets, can not receive any packets. i also check the pptp log in ubuntu server, and find this strange thing rcvd [IPCP ConfAck id=0x1 <compress VJ 0f 01> <addr 10.0.30.100>] rcvd [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 192.168.13.100> <ms-dns1 202.119.32.6> <ms-dns2 202.119.32.12>] sent [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 192.168.13.100> <ms-dns1 202.119.32.6> <ms-dns2 202.119.32.12>] Cannot determine ethernet address for proxy ARP local IP address 10.0.30.100 remote IP address 192.168.13.100 pptpd-logwtmp.so ip-up ppp0 **172.25.146.174** i did not set 172.25.146.174, it should be 192.168.13.100, can anyone tell me what should i do to fix this problem?

  Read the article

• Search for partial IP address using Windows Search?

  - by Dr. Dre

  I have a folder, c:\projects\, added to Windows Index. I know the indexing is working because I search for stuff in this folder all the time and the results come up very fast, and I've never noticed any accuracy problem until now. (I have had to tweak Indexing options to expand which file types have their contents indexed rather than just the file name, etc, but after that Search has worked pretty well for me). I've encountered a problem while trying to search for references to a particular IP address subnet. I'm trying to find all references to IP's with the pattern "192.168.220.xxx" (AKA, the 192.168.220.0/24, AKA 192.168.220.0/255.255.255.0 IP/netmask). Within Windows Explorer: c:\projects**.* is indexed c:\projects\work\project1\network_list.txt contains several "192.168.220.xxx" IP's Indexing status says all items are indexed (193,000 items). When I try to search for partial IP match, there are no search results. Tried searching for: 192.168.220, 192.168, 192.168.220., 192.168.220., 192.168.220.?, 192.168.220.??, 192.168.220.???, 192.168., 192.168.. Also tried variants of all the above surrounded with double quotes. All the searches returned 0 results. Within MS Outlook 2007: My mailbox, and all my offline .pst's are indexed. I search in Outlook pretty frequently, so I'm pretty sure indexed searches work across inbox and all .pst's. Indexing status in Outlook says all items are indexed. I also have references to these IP's in email, and I'd like to find all of them. Basically same deal as above, can't search for "192.168.220.xxx" IP's. Any way to fix this?

  Read the article

• Linux DHCPD Mac-Address based Groups

  - by GruffTech

  Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

  Read the article

• Split big Apache log to folder structure

  - by Dough

  I just changed my Apache log behavior because it was making me having very BIG files... So I now use cronolog to split my logs to log/httpd/2012/11/access_2012.11.30.log for exemple, pattern : %Y/%m/access_%Y.%m.%d.log I now want to split my old 42GB file to the same structure but really don't know how to do that efficiently. I tried some simple commands with cat, egrep, awk... but really don't know how to handle all that in a more powerful script. Here is how the log looks like : x.x.237.134 - - [08/Apr/2011:14:43:09 +0200] "GET... x.x.50.15 - - [08/Apr/2011:14:43:09 +0200] "GET... [...] x.x.254.19 - - [28/Feb/2012:15:24:48 +0100] "GET... So I need for yeah line to get : year %Y (ex. 2012) month %m (ex. 11) day %d And to push out the entire line to : %Y/%m/access_%Y.%m.%d.log Can someone give me clues to get that working ? Thanks a lot for your interest.

  Read the article

• Dynamic subdomain routing

  - by Nader

  Hi everyone, I asked this question over at stackoverflow, but got very few views: http://stackoverflow.com/questions/2284917/route-web-requests-to-different-servers-based-on-subdomain Perhaps it's more applicable to this crowd. Here it is again for convenience: I have a platform where a user can create a new website using a subdomain. There will be thousands of these, eg abc.mydomain.com, def.mydomain.com . Hopefully if we are successful hundreds of thousands. I need to be able to route these domains to a different IPs to point at a particular app server. I have this mapping in a database right now. What are the best practices and recommended technologies here? I see a couple options: Have DNS setup with a wildcard CNAME entry so that all requests go to a single IP where perhaps two machines using heartbeat (for failover) know how to look up the IP in the database and then do an http redirect to the appropriate app server. This seems clunky and slow to me. Run my own DNS server that can be programatically managed such that when a new site is created a DNS entry is added. We also move sites around to different app servers, so I would need to be able to update DNS entries in close to real time. Thoughts anyone? Thanks. Update2: I've setup external wildcard DNS pointing at an HAProxy web server whose job it is to route requests to backend servers. The mapping is stored in our internal PowerDNS server. Question now is how to get the HAProxy server (or another) to use the value of the internal DNS and not some config file or access list? – Update: Based on some suggestions below, it seems like reverse-proxy server(s) is the way to go. As I'll be rebalancing the domain-server mapping, these need to work instantly and the TTL on a DNS solution could be a problem. Any recommendations on software to use considering this domain-IP data is stored in a DB, and I'll need this to be performant?

  Read the article

• How to configure a shortcut for an SSH connection through a SSH tunnel

  - by Simone Carletti

  My company production servers (FOO, BAR...) are located behind two gateway servers (A, B). In order to connect to server FOO, I have to open a ssh connection with server A or B with my username JOHNDOE, then from A (or B) I can access any production server opening a SSH connection with a standard username (let's call it WEBBY). So, each time I have to do something like: ssh johndoe@a ... ssh webby@foo ... # now I can work on the server As you can imagine, this is a hassle when I need to use scp or if I need to quickly open multiple connections. I have configured a ssh key and also I'm using .ssh/config for some shortcuts. I was wondering if I can create some kind of ssh configuration in order to type ssh foo and let SSH open/forward all the connections for me. Is it possible? Edit womble's answer is exactly what I was looking for but it seems right now I can't use netcat because it's not installed on the gateway server. weppos:~ weppos$ ssh foo -vv OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /Users/xyz/.ssh/config debug1: Applying options for foo debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Executing proxy command: exec ssh a nc -w 3 foo 22 debug1: permanently_drop_suid: 501 debug1: identity file /Users/xyz/.ssh/identity type -1 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/xyz/.ssh/id_rsa type 1 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/xyz/.ssh/id_dsa type 2 bash: nc: command not found ssh_exchange_identification: Connection closed by remote host

  Read the article

• Website does not resolve in browser but traceroute is successful

  - by Colum

  I am trying to figure out an issue. My internet is working fine, but this one website is not resolving. It works via a proxy, traceroute works: 1 192.168.1.1 (192.168.1.1) 4.205 ms 0.568 ms 0.510 ms 2 * * * 3 67.59.255.13 (67.59.255.13) 10.583 ms 7.949 ms 7.557 ms 4 67.59.255.61 (67.59.255.61) 10.256 ms 9.576 ms 13.083 ms 5 64.15.8.126 (64.15.8.126) 9.943 ms 11.929 ms 11.452 ms 6 64.15.0.217 (64.15.0.217) 14.655 ms 14.092 ms 13.771 ms 7 64.15.0.118 (64.15.0.118) 33.201 ms 34.875 ms 36.544 ms 8 xe-6-0-3.ar1.ord1.us.nlayer.net (69.31.111.169) 34.027 ms 34.957 ms 34.231 ms 9 ae1-30g.cr1.ord1.us.nlayer.net (69.31.111.133) 82.683 ms 35.138 ms 37.592 ms 10 xe-3-0-0.cr2.iad1.us.nlayer.net (69.22.142.26) 41.657 ms 34.063 ms 34.519 ms 11 ae2-30g.ar2.iad1.us.nlayer.net (69.31.31.186) 35.780 ms 36.361 ms 33.968 ms 12 as33597.xe-3-0-7.ar2.iad1.us.nlayer.net (69.31.30.230) 35.086 ms as33597.xe-3-0-7.ar2.iad1.us.nlayer.net (69.31.30.234) 38.031 ms as33597.xe-3-0-7.ar2.iad1.us.nlayer.net (69.31.30.230) 36.833 ms 13 cr1.iad2.inforelay.net (66.231.176.246) 32.595 ms cr2.iad1.inforelay.net (66.231.176.10) 31.771 ms cr1.iad2.inforelay.net (66.231.176.246) 32.622 ms 14 cr1.iad2.inforelay.net (66.231.176.246) 32.956 ms 33.625 ms !X 41.058 ms 15 * cr1.iad2.inforelay.net (66.231.176.246) 35.312 ms !X * 16 * cr1.iad2.inforelay.net (66.231.176.246) 32.814 ms !X * 17 cr1.iad2.inforelay.net (66.231.176.246) 35.459 ms !X * 53.137 ms !X Ping returns this: Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 Request timeout for icmp_seq 4 Request timeout for icmp_seq 5 Request timeout for icmp_seq 6 But what I can not figure out is why my browsers (Firefox, Safari, Opera) can not resolve the domain. I am on a Wifi connection. What could be the problem? BTW I am on a Mac (10.6.5)

  Read the article

• Remote desktop type software that the client need not install anything...

  - by allentown

  I am primarily a Macintosh user, and can usually walk a client though any troubles they may have because I have a Macintosh in front of me. If they are on a different OS, things are close enough, or I cam remember, that I can get by. When trying to help clients on Windows, I get stuck. I do not have access to windows, and even if I did, there are far too many versions of Outlook, all with their various esoteric settings and checkboxes, that I could never see exactly what they are seeing. I mostly need to just help them with email setup. Something like copilot.com may do the trick. What is the simplest remote control software out there, ideally, it would accomplish these: No software needed on remote end, or, a single .exe that they can toss when done. I need Mac based software on my end. I do have ARD, which support VNC Free :) If possible, it would be really nice Needs a port forwarding proxy run by the company. There is no way I can get the user to alter their router, or to even plug directly into their WAN for a short time. On the Mac, I just have them open iChat, and this is all built in, proxying through AIM, looking for the same for Windows and Mac.

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >