Search Results

Search found 9634 results on 386 pages for 'proxy pattern'.

Page 317/386 | < Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >

• Webcam becomes "Unknown Device" after Windows Messenger 2011 is installed

  - by Boris

  I have Sony VAIO VGN-NS290J laptop. I installed Windows 7 Ultimate 64-bit. I was able to find drivers for all hardware without any problems. Recently, I installed Microsoft Windows Live Essentials 2011, i.e. Windows Live Messenger 2011. Ever since that application is running on my computer, my webcam is not recognized by the OS any more. It is listed as the "Unknown Device" and placed in the Universal Serial Bus controllers group in the Device Manager. There don't seem to be any drivers for this webcam. It's a standard Sony Motion Eye web camera and Sony does not offer any drivers for it. There is one application to download that utilizes the camera, but there are no drivers (and the system is showing the same behavior regardless of the presence of the application). It happens from time to time that the webcam becomes recognized by the OS again, after a couple of restarts; but not always. Then it becomes unknown again. I am absolutely positive that this issue is caused by the Windows Live Messenger 2011, because same symptoms caused the same effects before. I wish to be able to continue to use this software, but also to use my webcam. I was wondering if anyone had a similar issue and if there is a way to fix it. Thanks for all the help, I appreciate it. Update: I have discovered a pattern - if the camera goes astray, restarting the machine does not bring it back; but switching the computer off and turning it back on does. Every time! This is getting super complicated :)

  Read the article

• Connect to Apache times out randomly

  - by Amadan

  We are trying to set up an Apache server on a remote machine, but we experience strange behaviour. Checking with telnet remote.machine 80, one of these things happen randomly: Connect and serve content normally (no delay) Connect after a long pause Connect normally, then time out without response Timeout on connect Once connected, the request seems to be processed normally. These things do not occur if I connect from that machine directly to localhost 80. The Apache is dedicated, as is the server it runs on (runs only this one application, no-one else is using it for anything else). I am not an administrator of the remote site, and I do not know the network architecture over there, but apparently it's firewalled: (HTTP port is open, SSH port is IP-restricted, most others are closed). If there was any one pattern, I might have some ideas, but this variety of symptoms baffles me. Any ideas as to what could be causing this? Apache is 2.2; Server version is: Linux version 2.6.9-22.ELsmp ([email protected]) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:32:14 EDT 2005

  Read the article

• Content not being compressed even though I'm using zlib in php.ini

  - by Tola Odejayi

  I've edited my php.ini file so that it has these two entries: zlib.output_compression = On zlib.output_compression_level = 4 However, after restarting apache, when I request php pages, the headers returned in the response indicate that my server is still NOT serving compressed pages (here are selected headers as viewed using Chrome's Network feature): Cache-Control:no-cache, must-revalidate, max-age=0 Connection:Keep-Alive Content-Type:text/html; charset=UTF-8 Date:Mon, 17 Sep 2012 23:46:13 GMT Expires:Wed, 11 Jan 1984 05:00:00 GMT Last-Modified:Mon, 17 Sep 2012 23:46:13 GMT Pragma:no-cache Proxy-Connection:Keep-Alive Server:Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.17 Transfer-Encoding:chunked Via:1.1 XXX-PRXY-07 X-Powered-By:PHP/5.2.17 What might I be doing wrong? Is there any other setting that I need to change? EDIT Here is another set of headers returned to another computer: Cache-Control:no-cache, must-revalidate, max-age=0 Connection:close Content-Type:text/html; charset=UTF-8 Date:Thu, 20 Sep 2012 09:45:26 GMT Expires:Wed, 11 Jan 1984 05:00:00 GMT Last-Modified:Thu, 20 Sep 2012 09:45:26 GMT Pragma:no-cache Server:Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.17 Transfer-Encoding:chunked Vary:Cookie X-Powered-By:PHP/5.2.17

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

• How does Tunlr work?

  - by gravyface

  For those of you not in the US, Tunlr uses DNS witchcraft to allow you to access US-only (and UK-only stuff like BBC radio online) services and Websites like Hulu.com, etc. without using traditional methods like a VPN or Web proxy. From their FAQ: Tunlr does not provide a virtual private network (VPN). Tunlr is a DNS (domain name system) unblocking service. We’re using sophisticated technologies (a.k.a. the Tunlr Secret Sauce ©) to re-adress certain data envelopes, tricking the receiver into thinking the envelope originated from within the U.S. For these data envelopes, Tunlr is transparently creating a network tunnel from your location to our U.S.-based servers. Any data that’s not directly related to the video or music content providers which Tunlr supports is not only left untouched, it’s also not even routed through Tunlr. In order to use Tunlr, you will have to change the DNS address. See Get started for more information. I can't really wrap my head around how this works; I have always assumed that these services performed a geolocation lookup via your client IP. Just really curious as to how this works. EDIT 2 I believe they're only proxying the initial geo check and then modifying the data stream request to include your real IP address so that the streaming is direct, not proxied.

  Read the article

• Cisco 3560+ipservices -- IGMP snooping issue with TTL=1

  - by Jander

  I've got a C3560 with Enhanced (IPSERVICES) image, routing multicast between its VLANs with no external multicast router. It's serving a test environment where developers may generate multicast traffic on arbitrary addresses. Everything is working fine except when someone sends out multicast traffic with TTL=1, in which case the multicast packet suppression fails and the traffic is broadcast to all members of the VLAN. It looks to me like because the TTL is 1, the multicast routing subsystem doesn't see the packets, so it doesn't create a mroute table entry. If I send out packets with TTL=2 briefly, then switch to TTL=1 packets, they are filtered correctly until the mroute entry expires. My question: is there some trick to getting the switch to filter the TTL=1 packets, or am I out of luck? Below are the relevant parts of the config, with a representative VLAN interface. I can provide more info as needed. #show run ... ip routing ip multicast-routing distributed no ip igmp snooping report-suppression ! interface Vlan44 ip address 172.23.44.1 255.255.255.0 no ip proxy-arp ip pim passive ... #show ip igmp snooping vlan 44 Global IGMP Snooping configuration: ------------------------------------------- IGMP snooping : Enabled IGMPv3 snooping (minimal) : Enabled Report suppression : Disabled TCN solicit query : Disabled TCN flood query count : 2 Robustness variable : 2 Last member query count : 2 Last member query interval : 1000 Vlan 44: -------- IGMP snooping : Enabled IGMPv2 immediate leave : Disabled Multicast router learning mode : pim-dvmrp CGMP interoperability mode : IGMP_ONLY Robustness variable : 2 Last member query count : 2 Last member query interval : 1000

  Read the article

• Problem with Outlook 2010 (SMTP AUTH LOGIN)

  - by Filipe YaBa Polido

  **IGNORE THIS QUESTION - SOLVED WITH A PYTHON SCRIPT available at: http://yabahaus.blogspot.com I have to connect one customer Outlook 2010 to a remote server on which I have either no right, neither way to talk to the sysadmin. This is the thing, after installing and reviewing the logs on Wireshark: Outlook Express: HELO machine AUTH LOGIN username base64 encoded password base64 encoded mails go through. Outlook 2010: HELO machine AUTH DIGEST-MD5 response from server Outlook sends just a * AUTH LOGIN password base64 encoded So... I can send mails in the same domain, but can't send outside, it gives me a relay denied message. My point is... Why the h**l Outlook 2010 doesn't send the username AND the password?! It can never login the right way :| With other versions of Outlook it works fine, and with OE works great, it auths and allows to send mail to a different domain. I've googled and nothing worked. I'm pretty sure that I'm not alone with this one. My last resort will be to configure a local proxy/server that relays to the original one :| Any help would be appreciated. Sorry my bad english as is not my natural language. Thanks.

  Read the article

• What performance degradation to expect with Nginx over raw Gunicorn+Gevent?

  - by bouke

  I'm trying to get a very high performing webserver setup for handling long-polling, websockets etc. I have a VM running (Rackspace) with 1GB RAM / 4 cores. I've setup a very simple gunicorn 'hello world' application with (async) gevent workers. In front of gunicorn, I put Nginx with a simple proxy to Gunicorn. Using ab, Gunicorn spits out 7700 requests/sec, where Nginx only does a 5000 request/sec. Is such a performance degradation expected? Hello world: #!/usr/bin/env python def application(environ, start_response): start_response("200 OK", [("Content-type", "text/plain")]) return [ "Hello World!" ] Gunicorn: gunicorn -w8 -k gevent --keep-alive 60 application:application Nginx (stripped): user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; } http { sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; upstream app_server { server 127.0.0.1:8000 fail_timeout=0; } server { listen 8080 default; keepalive_timeout 5; root /home/app/app/static; location / { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } } Benchmark: (results: nginx TCP, nginx UNIX, gunicorn) ab -c 32 -n 12000 -k http://localhost:[8000|8080]/ Running gunicorn over a unix socket gives somewhat higher throughput (5500 r/s), but it still does't match raw gunicorn's performance.

  Read the article

• Laptop authentication/logon via accelometer tilt, flip, and twist

  - by wonsungi

  Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

  Read the article

• Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

  - by jensendarren

  I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

  Read the article

• xauth, ssh and missing home directory

  - by flolo

  We have several servers, and normaly everything works fine, except now... we get a new aircondition installed. This takes 36 hours and for this time almost all servers got shutdown, only 2 remaining servers run for the most important tasks (i.e. accepting incoming email, delivering some important websites, login-server). Everybody was informed that when they need appropiate data from the homedirs they should fetch it before take down. Long story short: Someone realized that he have run a certain program on one of the servers. No Problem, he can remote login into our login server and run the programm there without home directory (binaries are local and necessary information can be copied to the /tmp). That works like a charm until... ... the user needs to run a GUI programm. I find no easy way to make it running, usually ssh -Y honk@loginserver is enough but now the homedirectory is missing and ssh is not able to copy the cookies into ~/.Xauthority (as the file server with the home directories is down). Paranoid as all systemadmins all X-Server just listen locally not on tcp ports, so no remote X connection possible SSH config is waterproof - i.e. no way to set environment variables. My Problem is, that the generated proxy MIT cookie from ssh get lost as the .Xauthority doesnt exist. If I could retrieve it somehow I could reenter it a .Xauthority in /tmp. The only other option (besides changing the config) which came to my mind is, makeing a tunnel (netcat, or better ssh) from the remote host to the loginserver and copy the cookie manually (not sure if it the tcp-unix domain socket stuff works as expected). Any good suggestions (for the future - now our servers are already up)?

  Read the article

• Outlook 2010 not resolving SMTP address to Display Name

  - by Ben

  I have a weird problem where a user (director, naturally) has an odd problem with the way the to field shows in his Outlook. We are using Outlook 2010 (with RPC/HTTP) and Exch 2003 at the back end. Most of his mail shows in his mailbox with the To: field as normal. (e.g. Fred Bloggs in the to field.) However, some mails come in showing in the To: field as [email protected]. (Apparently this is an issue!) For example, most show as: but a few come in as: There doesn't appear to be a pattern to this. I have tried to replicate by: Sending from any specific senders to see if it recurs (it doesn't) Typing his full name in my Outlook and sending (it resolves as normal) Sending programatically (e.g. from script) - (it still resolves OK) Forcing a "[email protected]" entry in my Outlook. It resolves as soon as I hit enter Sending in cached mode Sending disconnected Anyone got any ideas how I can either replicate the problem or fix it! I can't tell at the moment whether it is a problem at his end or the sender's. EDIT This seems to be a global issue, following some more digging. Most people seem to have a few emails in their inbox addressed to their smtp address, rather than display name.

  Read the article

• Computer sponteously reboots when doing heavy file copy to/from disk

  - by Mark Hosang

  I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

  Read the article

• Getting 0xc00000e windows 7 "Boot device inaccessible" after random crashes

  - by Dynde

  I've been having some weird random crashes that I can't seem to locate, and I'm unsure if it's windows or hardware related. It's a brand new computer and very powerful. I've run into a couple of these random crashes, now I don't know what causes them, as it happens during the night, when I'm sleeping. When I wake up, all I see is a boot manager screen that says Exception: 0xc00000e "Boot device inaccessible". A simple restart doesn't fix the problem - it seems to struggle locating my primary hdd - but a complete shutdown works, it'll just fly straight into windows again. The event viewer doesn't tell me much. The most reason incident just gives me this: "The previous system shutdown at 08:55:44 on ?11-?12-?2011 was unexpected." And also a kernel power event: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. and I can see only two application event entries around that time at 8.47 (about 8 minutes prior to the crash): The Windows Modules Installer service entered the running state. The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. Can anyone tell me anything about this, or direct me to a forum or something that might know what's wrong? I can supply the extra details of the events too if needed. The hdd is an SSD - could that have anything to do with it? I ran a few diagnostics and memory and hdd should be okay - at least the diagnostics report is clean. Is it a faulty drive?

  Read the article

• No LAN and SMB access, and Explorer not responsive, when using a second connection

  - by Lorenzo

  I apologize if this is a duplicate question, I know that there are several questions about multiple connection (LAN + LAN and LAN + dialup) but I haven't been able to find one that fits my scenario. I'm still using Windows XP on my corporate laptop, and I'm connected to the corporate LAN via Ethernet. The LAN NIC has a public IP address, although not accessible externally, obtained via the corporate DNS server. This connection is firewalled and requires a proxy to access Internet. To access Internet sites blocked by the corporate firewall, I use my smartphone via USB tethering. It is seen as a new LAN interface, and I get a private IP address (class 192.168..). There are two problems: The LAN is not accessible, as the default gateway goes to the tethering NIC. I'd like to solve this, but I can live with it. My PC becomes unresponsive if I use Windows Explorer to view local files, or even when I open the start menu. I guess that this is caused by attemps to connect to a mapped network drive. But I disabled the "Client for Microsoft Networks" in the tethering NIC. Why the system still hangs? Of course if I disable the Ethernet NIC, Explorer stops hanging. If you need further details, add a comment. Thanks!

  Read the article

• Nginx - Serve blank page on "Bad Gateway" error

  - by TheLittleCheeseburger

  Hello all. I want to use Nginx as a simple reverse proxy, but if the server behind Nginx is down I just was to display a blank page. For some reason this configuration isn't displaying a blank page on error 502 and I can't figure out why. Thanks for your help! user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; use epoll; # multi_accept on; } http { keepalive_timeout 65; proxy_read_timeout 200; upstream tornado { server 127.0.0.1:8001; } server { listen 80; server_name www.something.com; location / { error_page 502 = @blank; proxy_pass http://tornado; } location @blank { index index.html; root /web/blank; } } }

  Read the article

• Problem with Outlook 2010 (SMTP AUTH LOGIN)

  - by Filipe YaBa Polido

  I have to connect one customer Outlook 2010 to a remote server on which I have either no right, neither way to talk to the sysadmin. This is the thing, after installing and reviewing the logs on Wireshark: Outlook Express: HELO machine AUTH LOGIN username base64 encoded password base64 encoded mails go through. Outlook 2010: HELO machine AUTH DIGEST-MD5 response from server Outlook sends just a * AUTH LOGIN password base64 encoded So... I can send mails in the same domain, but can't send outside, it gives me a relay denied message. My point is... Why the h**l Outlook 2010 doesn't send the username AND the password?! It can never login the right way :| With other versions of Outlook it works fine, and with OE works great, it auths and allows to send mail to a different domain. I've googled and nothing worked. I'm pretty sure that I'm not alone with this one. My last resort will be to configure a local proxy/server that relays to the original one :| Any help would be appreciated. Sorry my bad english as is not my natural language. Thanks.

  Read the article

• How browsers handle multiple IPs

  - by Sandman4

  Can someone direct me to information on exact browsers behavior when browser gets multiple A records for a given hostname (say ip1 and ip2), and one of them is not accessible. I interested in EXACT details, like (but not limited to): Will browser get 2 IPs from OS, or it will get only one ? Which ip will browser try first (random or always the first one) ? Now, let's say browser started with the failed ip1 For how long will browser try ip1 ? If user hits "stop" while it waits for ip1, and then clicks refresh which IP will browser try ? What will happen when it times-out - will it start trying ip2 or give error ? (And if error, which ip will browser try when user clicks refresh). When user clicks refresh, will any browser attempt new DNS lookup ? Now let's assume browser tried working ip2 first. For the next page request, will browser still use ip2, or it may randomly switch ips ? For how long browsers keep IPs in their cache ? When browsers sends a new DNS request, and get SAME ips, will it CONTINUE to use the same known-to-be-working IP, or the process starts from scratch and it may try any of the two ? Of course it all may be browser dependent, and may also vary between versions and platforms, I'd be happy to have maximum of details. The purpose of this - I'm trying to understand what exactly users will experience when round-robin DNS based used and one of the hosts fails. Please, I'm NOT asking about how bad DNS load balancing is, and please refrain from answering "don't do it", "it's a bad idea", "you need heartbeat/proxy/BGP/whatever" and so on.

  Read the article

• Not getting IP from ISP on Multicast Network

  - by Johan Nielsen

  Im having an odd issue with my ISP (COMX.dk) I have a managed access gateway box (Telsay) with three 8P8C ports for use with Internet and Ip-Tv (respectively on different VLANS (so does my ISP tell me)) To utilize a port you will need to register your device's mac address through an online interface. You will then get your device paired with a static ip. I am using one port actively and I have registered another device (router). The router is configured to listen for an active dhcpd on the network. When my router get a lease I get a private ip 192.168.2.2 (not the one bound to my mac) which is odd! I unconnected my router from the gateway and connected my laptop directly. Same thing happened - I was given a private address. I did a port scan on the gateway and found port 80 to be open and browsed to the ip. I was then presented with a management interface of a Belkin wireless router (HMMM!!!!) <--by the way, not my gear At this point I called the ISP to let them know of my issue/findings - Only to be replied "Well, we cant see any rogue dhcp servers" (thinking to myself, well I can) I then decided that it could be fun to try the other port of my gateway, only to experience the same. So I reconnected my router and used the remaining port to make an observer(wireshark promic etc.) I am able to see my router trying to discover a dhcp server but I can also see my ISP's IGMP and PIMv2 packages just repeating the same pattern. Hello...Hello...Hello :) So I called them again, only to get the same response, "we dont see any rogue dhcp's...we cant see the host you are talking to (mac address of the Belkin router)...you are definitively connected through wireless?!?(no im not, no such thing as a wireless wire - i thought to myself)" My questions is, What is going on? (besides from what im reporting here) What am I seeing that the don't? What can I tell them in order for them to resolve mine/their issue?

  Read the article

• Why would e-mail from our own domain not be forwarded to gmail

  - by netboffin

  To solve a problem with spam on our server we tried to forward e-mail from our dedicated server's mailserver(matrix smtp service) to gmail, but while most e-mails got through e-mail from our own domain all went missing. They weren't in the inbox or spam or anywhere else. We've had to go back to using the old system, which means my boss gets a huge amount of spam. We have a windows 2003 server with iis 6 and the matrix smtp service installed. I've toyed with the idea of installing a mail proxy like ASSP but it looks pretty complicated. We're hosting 20 domains on the server as well as our own which has an online shop whose payment system depends on email. I can't start playing around with complicated solutions when it could have disastrous consequences and I don't know enough to implement them safely. So my question has two parts: Part One: Why can't we forward e-mails from people using the same domain. If our domain was foobar.com then [email protected] can't receive from [email protected], but he can receive from everyone else. Part Two: Is there a really simple server side solution to spam that would work with matrix? For instance popfile?

  Read the article

• I want to use OpenVPN to access the web and email from China. How?

  - by gaoshan88

  My question: How do I use my already existing OpenVPN setup to enable secure, remote web surfing and email checking from open wireless hotspots? Some long winded details: I am running Ubuntu and have OpenVPN up and working fine as a server. My client machine connects fine as well. However, that just gets me a secure connection to my home network. What I want is to be able to access my VPN server and surf the web or check email securely from anywhere with an open wireless connection. I am frequently in China and having secure, unblocked access would be a boon (especially since I like to work from tea houses and coffee shops and I've already had a password sniffed and hacked once). I already know how to tunnel over SSH via a SOCKS proxy using something like: ssh -ND 8887 -p 22 [email protected] but since I have OpenVPN I figure why not try it? So... what are the steps involved in making it so I can connect to my VPN and the surf and check mail to my hearts content (slowly to be sure but at least it wold be secure). Thx!

  Read the article

• Need advise for choosing software\hardware for virtualization.

  - by Anatoly

  Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

  Read the article

• SSL Handshake negotiation on Nginx terribly slow

  - by Paras Chopra

  I am using Nginx as a proxy to 4 apache instances. My problem is that SSL negotiation takes a lot of time (600 ms). See this as an example: http://www.webpagetest.org/result/101020_8JXS/1/details/ Here is my Nginx Conf: user www-data; worker_processes 4; events { worker_connections 2048; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; sendfile on; keepalive_timeout 0; tcp_nodelay on; gzip on; gzip_proxied any; server_names_hash_bucket_size 128; } upstream abc { server 1.1.1.1 weight=1; server 1.1.1.2 weight=1; server 1.1.1.3 weight=1; } server { listen 443; server_name blah; keepalive_timeout 5; ssl on; ssl_certificate /blah.crt; ssl_certificate_key /blah.key; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; ssl_prefer_server_ciphers on; location / { proxy_pass http://abc; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } The machine is a VPS on Linode with 1 G of RAM. Can anyone please tell why SSL Hand shake is taking ages?

  Read the article

• Ubuntu server crashes; need help figuring how to figure out why

  - by neezer

  I have a 768 Slice at slicehost.com running Ubuntu Server 8.04.2 LTS (hardy) with a LAMP stack on it that periodically crashes, though why I am not sure. From what I can tell, there is a process that basically goes rogue and consumes all the memory on the slice, suffocating all the other programs running until the whole thing comes to a grinding halt, and I have to do a hard reboot of the slice to get it back up and running again. I can't detect any pattern for this (it seems to happen about once a month, more or less). Here's a screenshot of my console during the last crash: I would assume that a possible cause might a PHP script or an apache configuration rule that might cause the crash if triggered? How would I be able to find out which one is the offending one? I've checked and rechecked all my PHP scripts, and running them doesn't seem to trigger the crash. I've also been able to log on to my system during a crash and see what's running (with top), but I can't tell how the offending process was started, so I can't trace the root of the problem! I know my description is overly generic, but unfortunately my expertise in tracking down the source of these glitches is very limited. If you need any additional information about my system in order to help me figure this out, please let me know in the comments, and I will append it to the question. My only other lead as to the culprit here is Wordpress, which we have installed on this server. Here are the details: Wordpress 3.0.3 with the following plugins installed and activated: Addmarx - Bookmark/Share/Email Dropdown, Akismet, All in One SEO Pack, Animated Banners, Automatically publish highlights of any website, directly to your Blog, Broken Link Checker, CMS Dashboard, Collapsing Categories, Status Updater, SubHeading, Ultimate Google Analytics, VastSubCat, WP-CMS Post Control, and WP Super Cache

  Read the article

• Apache 2.4 with PHP-FPM

  - by tubaguy50035

  I'm trying to setup Apache 2.4 with PHP-FPM 5.4 using the new modules with Apache 2.4. The following is what I have currently in my virtual host file: <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www #Directory permissions <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Require all granted </Directory> CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> I have PHP-FPM running using Unix sockets with a sock file located at /var/run/php5-fpm.sock. How do I proxy my requests to this sock file? I've seen some sites say to use ProxyPassMatch and others are saying Rewrite Rule. Are there pros or cons on either side? Also, most sites I'm seeing are showing ProxyPassMatch with a regex to only pass .php files. Could I also send it .html files? For whatever reason, we have a ton of PHP inside .html files. Edit: As noted in the comments, it looks like mod_proxy_fcgi doesn't support Unix sockets. Is there another module I should be using?

  Read the article

< Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >