Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 315/1221 | < Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Connection drops while transferring large files to one server on a network

  - by Charlotte

  My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

  Read the article

• Posting data from multiple servers routing through one server to client server

  - by Swaroop Kundeti

  I have 5 webservers behind Load balancer and we have a client server at other end. Client has white listed my 5 webserver public ip so that my webservers will post a file to the client server. Here the problem is my webservers is going to increase and i cannot always ask client to make my new webserver ip's white list. So i would like to make my infra this way, my webservers will post data to the client server routing from a single server. Like assume that web-1 is main server and the remaining 4 web servers will post data to client server routing through main web-1. I was told that this can be achieved by doing IP Tunneling. But i have no idea how to do that. Would be great for any kind of help.

  Read the article

• Oracle 11g network configuration

  - by Kylo

  I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Problem with VPN using 2 Wire Router with a Linksys Router.

  - by Hiram Hubbard

  I am having a problem with a VPN between a 2 Wire router and a Linksys router. 2 wire is the client PC using Linksys Quick VPN software and Linksys RVS4000 is the server. The PC is not the issue. It works on a different network not using 2 wire. Also the Linksys RVS4000 is not the issue, 3 other user can VPN to it with no problem not using 2 Wire. The problem is with 2 Wire. The client PC is getting this error: "The remote gateway is not responding" What configuration changes are needed on the 2 Wire router (port, UPNP, etc...) and what changes are needed if any on the Linksys RVS4000? Thanks.

  Read the article

• ISP Load Balancing with ISA 2006

  - by Bill Best

  I understand that ISA 2006 has an integrated Network Load Balancing feature. We also recently acquired a second internet line through a second service provider. I know it is possible to purchase a NLB router for using both incoming lines but this is not the route we would like to take if at all possible. Thus, is it possible to have two ISA 2006 servers each with there own external connection, Load balanced to be viewed as one gateway? My thought was to have two ISA servers each with three NICs, one external, one internal and one for cross communication. I am under the impression that this should work but was hoping someone else has had experience with it.

  Read the article

• Microsoft Remote Desktop Bandwidth Usage

  - by Salman A

  I am wondering how much bandwidth in terms of bytes sent/received is consumed by a typical remote desktop session. I need to know this because our ISP enforces a cap on monthly bandwidth usage (i.e. the total amount data in GB that can sent or received in a month). So just wondering like how much KBs or MBs are transferred per hour in an average RDP session.

  Read the article

• How to setup Mac server to use two gateways

  - by Brady

  I recently asked this question: How to set Mac server to use different Gateway for internet bound traffic The answer given works but has presented me with another issue that I didnt make clear in that question. Here is my network layout as it stands: At the moment outside staff members use some services on the existing internet 1 link. Those services are hosted by the Mac server. If I change the gateway of the Mac server to the second modem those outside staff lose visabilty on those services. Now I dont know how to go about solving this issue. I want the second link to be used when the Mac server goes to rsync data offsite but everything else use link one. How do I do this? Thanks Scott EDIT: This has been resolved by setting the default gateway on the Mac server to 192.168.1.254 Thus leaving everything on the network as it was before. but to get the Mac server to use the other link for rsync I've added a route to the Mac server to route traffic to the rsync server through the second gateway. sudo route add -net {server IP's}/{Netmask} 192.168.1.1 I've awarded the answer to gravyface for pointing me to a post on how to make this route persistant in Mac

  Read the article

• Connect work laptop (domain) to home workgroup

  - by jjeaton

  Is there an easy way to have my work laptop connect to a home workgroup for file sharing with my other PCs, but then easily switch back to connecting to my work domain when I'm at work? I have the following setup: Windows 7 Home Premium Server/HTPC 2 Windows XP laptops 1 Vista laptop (Work) The work laptop connects to a work domain, the remaining computers are on a home workgroup for sharing files/printer. Also is it possible to share files over my LAN while I'm connected to the work domain, but at home? I've tried Live Mesh, but my 2 home laptops are very slow and don't work well with it. I also use Dropbox, but I'd like to be able to share larger files. I may be missing a simple solution here...

  Read the article

• Is to possible to achieve the SATA II's 3Gbps (375MBps) between home network storage and home computers?

  - by techaddict

  Gigabit ethernet only has 1Gbps (125MBps), whereas SATA II has up to three times that rate. Is it possible to achieve the rate of three times Gigabit ethernet connection which is SATA II speeds, between home network storage and the laptops and desktops with SATA II hard drives? If so, how? Or, is the limitation of a gigabit ethernet port on the laptops the limitng factor, making 1000Gbps the fastest practical transfer speed possible? (practical, meaning that without taking apart the laptop and doing physical modifications like branching a SATA II transfer cable, etc.) -- I just realized -- wouldn't a USB 3.0 cable do the trick? Since USB 3.0 can reach up to 675MBps?

  Read the article

• Wireless Repeating with two Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogin of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• Setting up Windows 2008 with VPN and NAT

  - by Benson

  I have a Windows 2008 box set up with VPN, and that works quite well. NPS is used to validate the VPN clients, who are able to access the private address of the server, once connected. I can't for the life of me get NAT working for the VPN clients, though. I've added NAT as a routing protocol, and set the one on in the VPN address pool as private, and the other as public - but it still won't NAT connections when I add a route through the VPN server's IP on the client side (route add SomeInternetIp IpOfPrivateInterfaceOnServer). I know I can reach the server's private interface (which happens to be 10.2.2.1) with remote desktop client, so I can't think of any issues with the VPN.

  Read the article

• Correct way to set up office network - 8 workstations, a file server and a staging server

  - by naunu

  Our office had this old school windows 2003 domain setup, our server caught fire, and now we are looking to do it right from scratch. Here is what we need: 5 PC and 3 Mac workstations for web development, they will each have WAMP/MAMP setup on them, managed by their developers. We will have a file server for assets, and a LAMP server with an external IP for staging. Here is what we have to work with: 5 IP addresses, brand new PC file server with windows 2008 SE, D-Link DSS-16+ 16 port switch, belkin 5 port wireless router, cable modem with 4 ports. How I have it set up now (this is a temporary makeshift setup): Cable modem = LAMP server, wireless router Wireless router = Switch = All of the workstations and file server (setup as a workgroup). We have noticed our internet is very slow with us all plugged in to the switch, and the switch plugged in to the router. I am not positive, but I think it is because our router does not have NAT. We are also having problems with the MACs connection to the network drive - it keeps disconnecting. I want this done right, and we have a ~$600 budget to buy anything else we need. Does anybody have any advice for me? Should I set up a domain or workgroup?

  Read the article

• Is dual boot via wake on lan possible?

  - by ianfuture

  Is it possible to set up a PC so it can Wake on Lan and then have the option of which OS to boot into? I want to have a secondary PC with Windows and a *nix variant installed. I want the PC to be in a remote room so I can connect via a wireless hub to it and then boot it up as and when required and choose which OS to boot into. If it is possible how would I go about it? Any recommendations on how to do it or where I can get more info on how to do it? Thanks.. Ian

  Read the article

• Trying to understand why VLANs need to be created on intermediate switches

  - by Jon Reeves

  I'm currently studying for the Cisco switching exam and having trouble understanding exactly how 802.1q tagging works. Given three daisy chained switches (A,B, and C) with trunk ports between them and VLAN 101 defined on both end switches (A and C), I'm not sure why the VLAN also needs to be defined on the middle one (B)? Note that I am not disputing that it does need to be configured, I'm just trying to understand why exactly. As I understand it, traffic from VLAN 101 on switch A will be tagged as it goes through the trunk to switch B. According to the documentation I have read, trunks will pass all VLANs by default, and the .1q tag is only removed when the frame leaves through an access port on the relevant VLAN. From this I would expect switch B to simply forward the tagged frame unchanged through the trunk to switch C. Can anyone shed some light on how switch B processes this frame and why it does not get forwarded through the other trunk ?

  Read the article

• Upgrade AirPort on Macs to support Snow Leopard's Wake on Wireless/WLAN?

  - by wojo

  Snow Leopard now supports Wake on WLAN, but not all hardware supports this. For example, my Octo Mac Pro from early 2008 has an AirPort card, but it does not support this. Nor does my 2007 2.33GHz MacBook Pro. For reference to what is needed, look at http://www.macrumors.com/2009/08/28/a-closer-look-at-snow-leopards-wake-on-demand-feature/ which includes a screenshot of what the System Profiler should show. It's pretty hard to find Apple parts, but is it possible to put newer cards into these machines to have them support Wake on Wireless?

  Read the article

• Win7 Command Prompt drives not available

  - by jmerrill

  I have the opposite problem compared to the author of this question: Hard drive access denied from Windows Explorer (but works from command prompt as Admin) I can see all the drive letters for a particular server in Windows Explorer, and can navigate through them exactly as would be expected. The drive letters are displayed in Explorer in parens to the right of the path info -- finalpathportion (\\server\otherpathportions) (driveletter:) e.g. jmerrill (\\server\users) (H:) But the drive letters are not usable in a "Run as Administrator" command prompt. They have worked in the past, but I have since rebooted. I thought that perhaps I had to start a new command prompt having visited them in Explorer -- but that did not help. "net use" in the command prompt shows Unavailable H: \\server\users\jmerrill Microsoft Windows Network with similar info for the other drives. I can do net use h: /d net use h: \\server\users\jmerrill for each drive, and get the letters to be available in the command prompt. It is perhaps obvious that I don't think that it should be necessary to do that. Does anyone have any ideas?

  Read the article

• trying to connect to non-standard port over esxi guest network

  - by user52874

  I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

  Read the article

• Sniffing at work- How to detect

  - by coffeeaddict

  Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

  Read the article

• Good Wireless Range Extender

  - by Joseph Sturtevant

  Can anyone recommend a good wireless (802.11g) range extender? I would like to find something that will provide reliable wireless to areas of the building that aren't covered or get poor reception. I would also like a product that won't require big changes to my current wireless setup (multiple APs with a wireless controller are out). Latency and bandwidth aren't terribly important. Does anyone have experience with a product like this?

  Read the article

• How do you confirm network adapter is gigabit capable?

  - by StrandedPirate

  Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

  Read the article

• How to connect to a PEAP GTC wifi network with Android 2.2 on a nexus one?

  - by Glen

  Hi, I recently updated my nexus one to 2.2. Now I can't connect to my uni's wifi. They use PEAP with GTC. I had it working fine on 2.1. Also it works fine on my Ubuntu laptop. I have entered my uni number (user name) in the identity box. I have entered my password in the password box. I have emailed the certificated that works on Ubuntu to my self and installed it on the nexus one. I have enabled secure credentials. What am I doing wrong? Thanks, Glen.

  Read the article

• Problems using PC as a media server with PS3

  - by Tiger

  I recently got a PS3 and decided to take advantage of the fact that it can be used to stream movies by making my PC a media server. I've done this in the past with the same router I have now before I sold my old PS3, but not on this PC. I've tried using both Tversity and PS3 Media server, but I don't think the problem lies within the configuration of either of those programs because I am unable to ping the PS3. This problem only occurs when I am using a wired connection on my pc, attempting to connect to a WLAN connection on the PS3. If I switch to WLAN on my PC I can successfully ping the PS3 and connect to the media server. Thanks

  Read the article

• Is real-time or synchronous replication possible over WAN link?

  - by johnnyb10

  The company I work for is looking to implement truly real-time file replication with file locking over a WAN link that spans over 2000 miles. We currently have a 16-drive SAN setup in our east coast office. We also have an office out in Colorado that will have the same exact SAN setup. The idea is to have those two SANs contain the same exact data at all times, which will allow us to work with the same data pool, and which will also provide use with an offsite backup solution, should a failure occur on either end. We're running Server 2008. The objective is to enable users in the east coast office to work on files and have those changes be instantly updated on the Colorado SAN as well. We also need there to be file locking so that there will be no conflicts or overwritten changes if users attempt to work on the same file. Is this scenario even possible, at speeds that would make the files usable? And if so, what software would we need to pull this off? As I understand it, DFS-R does not provide file locking, so if we used that, we would need to go with a third-party product like Peerlock. But I don't even know if DFS-R is an option. Can it replicate quickly enough over a WAN link? Can any product? It seems that if we were to use synchronous replication, the programs would be unacceptably slow, as every write would have to wait for confirmation from the other end of the link. But if we used asynchronous replication, what kind of latency would we be looking at? There is a product from GlobalScape called WAFS that claims to provide "File coherence with real-time file locking, file release, and synchronization" and says that "As files are modified, changes are mirrored instantly using intelligent byte-level differencing to minimize the impact on network bandwidth". So this sounds like synchronous replication, but that doesn't even seem possible, given physical limitations such as the speed of light. If anyone has any experience with this kind of setup, or knows whether it's even possible, I'd appreciate your input and suggestions, including recommendations for software that we should check out.

  Read the article

• Sharing files between 2 different routers

  - by Chris

  I realize this has been asked before and I have read as much as I could find on the topic but I still need help with this because there are so many different approaches and the ones I am trying aren't working. So I have 2 routers, lets call them A and B. Both have a wireless feature and are active. A is in the basement and receives the internet. There is a TV on the ground floor that is connected to A through an ethernet wire. B is upstairs and gets the internet from A through an ethernet wire. Connected to B, is a desktop running Plex Media Server. What I want to do is make sure devices connected to both routes can access the Plex Media Server. So what I have read is that I should plug in the ethernet wire connecting B to a into a LAN port instead of the WAN port. After that I should turn off DHCP. I have tried this and B stops receiving internet. What am I doing wrong? Another thing I have read is to use Router B in bridge mode but Router B is running openwrt and I have QoS on it so gaming/VoIP/browsing is unaffected by heavy downloading/uploading. I would prefer to keep this active. I realize it might be ineffective if a device in Router A is doing some hardcore downloading but all that stuff is done on Router B anyway so it doesn't matter. Router A can't get openwrt because it is a shitty one provided by Bell. So, how do I proceed with this?

  Read the article

< Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >