Search Results

Search found 17749 results on 710 pages for 'connection pool'.

Page 316/710 | < Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >

• What are the implications of expanding an internal subnet mask?

  - by Philip

  Our network is currently working on a 192.168.0.x subnet, all controlled through DHCP, except for the few main servers who have hard-configured IP address settings. What would I kill if I changed the DHCP-published subnet mask from 255.255.255.0 to 255.255.0.0? The reason for doing this is not because we have a huge sudden influx of machines, but because I'd like to start partitioning specific devices into specific IP ranges (to be neat and tidy). For what its worth, I don' plan on changing the allocated DHCP address range, but rather want to move some of the reserved and excluded DHCP addresses out of the address pool. e.g. printers will be 192.168.2.x I will obviously need to change the subnet mask manually on my manually configured devices.

  Read the article

• Jira access with AJP-Proxy

  - by user60869

  I want to Configure the Jira-Acces over APJ-Proxy. I proceeded as follows (Following this howto: http://confluence.atlassian.com/display/JIRA/Configuring+Apache+Reverse+Proxy+Using+the+AJP+Protocol) : 1) In the server.xml I activate the AJP: 2) Edit VHOST Konfiguration: # Load Proxy-Modules LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so # Load AJP-Modules LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so # Proxy Configuration <IfModule proxy_http_module> ProxyRequests Off ProxyPreserveHost On # Basic AuthType configuration <Proxy *> AuthType Basic AuthName Bamboo-Server AuthUserFile /var/www/userdb Require valid-user AddDefaultCharset off Order deny,allow Deny from all Allow from 192.168.0.1 satisfy any </Proxy> ProxyPass /bamboo http://localhost:8085/bamboo ProxyPassReverse /bamboo http://localhost:8085/bamboo ProxyPass /jira ajp://localhost:8009/ ProxyPassReverse /jira ajp://localhost:8009/ </IfModule> EDIT: In the logs if found follow: //localhost:8080/ [Fri Nov 19 14:51:13 2010] [debug] proxy_util.c(1819): proxy: worker ajp://localhost:8080/ already initialized [Fri Nov 19 14:51:13 2010] [debug] proxy_util.c(1913): proxy: initialized single connection worker 1 in child 5578 for (localhost) [Fri Nov 19 14:51:32 2010] [error] ajp_read_header: ajp_ilink_receive failed [Fri Nov 19 14:51:32 2010] [error] (120006)APR does not understand this error code: proxy: read response failed from (null) (localhost) [Fri Nov 19 14:51:32 2010] [debug] proxy_util.c(2008): proxy: AJP: has released connection for (localhost) [Fri Nov 19 14:51:32 2010] [debug] mod_deflate.c(615): [client xx.xx.xx.xx Zlib: Compressed 468 to 320 : URL /jira But It dosen´t work. Somebody have an idea?

  Read the article

• No Outbound Internet on Windows Home Server

  - by Kyle B.

  Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

  Read the article

• Drop database on DB2 9.5 - SQL1035N The database is currently in use

  - by Tommy

  I've never got this working the first time, but now I can't seem to do i at all. There is a connection pool somewhere using the database, so trying to drop the database when an application is using the database should give this error. The problem is there are no connection to the database when I issue these commands: db2 connect to mydatabase db2 quiesce database immediate force connections db2 connect reset db2 drop database mydatabase This allways give: SQL1035N The database is currently in use. SQLSTATE=57019 running this command shows no connections/applications DB2 list applications I can even deactivate the database, but still can't drop it. db2 => deactivate database mydatabase DB20000I The DEACTIVATE DATABASE command completed successfully. db2 => drop database mydatabase SQL1035N The database is currently in use. SQLSTATE=57019 db2 => Anyone got any clues? I'm running the cmd-windows as the local administrator (windows 2008) and this is also the admin for DB2. The connectionpool-user cannot connect during quiesce-state.

  Read the article

• Http 400 'Bad Request' and win32status 1450 when larger messages are sended to a WCF service

  - by Tim Mahy

  Hi all, we sometimes receive Http 400 bad request resultcodes when posting a large file (10mb) to a WCF service hosted in IIS 6. We can reproduce this using SOAP UI and it seems that it is unpredictable when this happens. In our WCF log the call is not received, so we believe that the request does not reach the ASP.NET nor WCF runtime. This happens on multiple websites on the same machine each having their own application pool. All IIS settings are default, only in ASP.NET and WCF we allow bigger readerQuota's etc.... The win32status that is logged in the IIS log is 1450 which we think means "error no system resources". So now the question: a) how can we solve this b) (when a is not applicable :) ) which performance counters or logs are usefull to learn more about this problem? greetings, Tim

  Read the article

• Max. Bandwidth Cannot be Reached

  - by Poyraz Sagtekin

  I have a question regarding the bandwidth usage. I don't think it's a very technical question but I really want to know the reason behind the problem. I'm having my education in one of my university's campuses. There is a 200mbps bandwidth availability for approx. 2100 students. Our main campus has 25,000 students and 2gbps bandwidth and there is no problem with the internet connection speed in main campus. However, in my campus, we are having difficulties with the internet connection speed. I went to IT department of my university and they've showed me some graphics about the bandwidth usage. The usage of the bandwidth has never reached 200mbps and it generally is around 130-140mbps. According to this information, maximum bandwidth is never made by the users but the browsing speed is not very convincing. What can be the problem? Maybe this is a silly question but I really want to know the reason. They told me that they've reached 180mbps before.

  Read the article

• NAS4Free disk encryption and ZFS error

  - by MiNT

  I have installed a NAS4Free on a VM, and as recommended, i installed it on a 1GB virtual disk, and assigned another disk 500GB to this VM for file storage. I have created the disk, encrypted it, created a ZFS virtual disk, and then a ZFS storage pool. Everything was working. On every restart of this VM i needed to go on and mount the encrypted drive. Recently i upgraded the host machine, and now i cant mount or make it work. I have tried removing everything and setting up from scratch everything, with the exception of formating the disk, i have used an encrypted one without formating it. Does anybody have any suggestion on how can i at least get back my data, can i mount somehow the encrypted drive even in another utility, just need to get back the data that were on it.

  Read the article

• VPN networking issue

  - by DuncanDavies

  I have 2 servers hosted in the cloud. One an application server, one a VPN server, both running Win2008. Both have a local IP address assigned by DHCP in different network subnets, 10.227.55.0 (VPN) and 10.231.5.0 (App Server). These servers can ping each other. My VPN client connects in to the VPN server (using a L2TP connection on a Win7 client). It is assigned an IP Address from the VPN server's static pool (the VPN server takes 192.168.100.1, the client is given 192.168.100.2). The client can ping both the 192.168.100.1 address of the VPN server, and its 'local' IP address (10.227.55.X). What the client can't do is ping the App Server. How can I configure routing so that my client can access the App Server, without hard-coding any of the DHCP IP addresses anywhere? thanks Duncan

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• Missing Home Folder XP Clients 2008R2 Domain

  - by minamhere

  We just completed a migration from Server 2003 to Server 2008R2. Everything seems to have gone well except that many of our desktops have stopped mapping the Home Folder as set in Active Directory. Other mappings that are defined on individual clients are mapping just fine, these mappings are all on the same file server as the failing Home Folders. Half of the users are on 1 file server and half are on another. Users from both servers are having this problem. I have enabled the Group Policy setting to "Wait for network before logging in". I enabled the policy to "Run Logon Scripts synchronously". There are no errors on the Domain Controller or either File Server. When I enabled Group Policy Preferences as an attempted workaround, I get this error: The user 'V:' preference item in the '<Policy Name>' Group Policy object did not apply because it failed with error code '0x800708ca This network connection does not exist.' This error was suppressed. This seems to indicate that the network connection is not ready by the time Group Policy is processed. But isn't this the point of the "Wait before logging in" and "Run Logon scripts synchronously" settings? Some other background facts: The new Server 2008R2 installation is a Virtual Machine. It is on a new Subnet in a different building from the old server. DNS and DHCP were also migrated from the old DC to this new DC. These Home Folders were all working properly before the migration. Are there new security restrictions/policies in Server 2008R2 that might be causing this? Is there a way to check whether I have an underlying network connectivity issue? Maybe moving the server to the new building is causing a delay/timeout? Any thoughts or ideas on what could be causing this or how I can resolve this? Thanks.

  Read the article

• Nokia 5800 v50, getting "Invalid server name" with ad-hoc wlan with Windows 7

  - by Krunal

  After upgrading to v50 firmware in my Nokia 5800 xpress music phone. I am not able to connect to ad-hoc wlan network in my laptop(Windows 7 OS). I have a dialup internet connection and created wireless ad-hoc network to access the internet in my phone. But I am getting "invalid server name" in the phone and my wireless network access type in Windows 7 shows "no internet access". I am able to connect to wlan infrastructure network using 5800 in my office. So my phone is working with wlan and I m able to access internet on it. BUT The problem is "dial up with ICS enabled" and "AD-HOC wlan network" in Windows 7. Can anyone give some solution on it. Or can you provide a guide/tutorial to connect 5800 with adhoc network and dialup internet in Windows 7. System: Windows 7 Dial up internet connection with ICS enabled. Ad-Hoc wireless network with WEP Nokia 5800 Xpress Music phone Note: I have read other posts also and tried their solutions but didn't worked for me. the first solution is to bridge the network and access it. but how can I bridge the dialup and wlan netwok? second solution is manually configure IP and DNS addresses in phone. But what should I add as IP and DNS as my dial up and adhoc network have automatic addresses.

  Read the article

• INFORMIX - listener thread err 25582

  - by Samuel Lao

  I´ve been digging different forums in the last 7 days looking for a possible solution.... Our database is based on informix running in a Linux server (LINUX SUSE 11). Suddenly, last saturday informix began to show an error message: listener-thread err=-25582 oserr=0, network connection is broken End users started to call reporting about slow network performance to this server, moments where the database application lost connection with server...so we proceeded doing a ping to the db server, getting good responses (1ms) without losing packets. I tried typing telnet (ipserver) 1526 which is informix's port for the application, it works. We had to disconnect the server and enable a backup db server which is located on another branch. It has been working in a regular way because the backup server hasn´t good specs (it is an old dell server model). So, I scanned the main server looking for viruses using Trend Micro Server Protect, it didn´t find anything (0 viruses and spywares). I revised the switches and routers, but I haven´t find anything strange... What else could be ? Thanks in advanced for your time and help with this issue.....I would really appreciate any advice...

  Read the article

• Default route not on LAN

  - by jarmund

  I have a network that in principle looks like this: H1---\ /----Inet1 H2---->---GW1---< H3---/ \----GW2-----Inet2 H1 and H2 = Hosts that need access to internet with GW1 Inet1 = Internet link over 3G connection Inet2 = 5GHz link to Internet (not always up) GW1 = Works as a router, automatically picking the "best" connection between Inet1 and Inet2 (the latter via GW2). GW2 = 5GHz wifi router And here's the problem: H3 only needs internet access when Inet2 is up. What i was thinking of doing was a routing table that looks like this: route to GW2 via GW1 default route is via GW2 I first set the route to GW2 via GW1 without a problem. But when i try route add default gw 1.2.3.4 (1.2.3.4 being the IP of GW2), it complains "SIOCADDRT: No such device" Is the problem that the default gw i'm trying to set is not reachable directly? Is there a different approach that would allow me to achieve this? An alternative (and hypothetical) approach: Since H3 will be using a static IP, is it possible to do some magic with iptables on GW1 to forward any packets from H3 to GW3, thereby "tricking" H3 into using GW2 as its default router?

  Read the article

• Nginx & Passenger - failed (11: Resource temporarily unavailable) while connecting to upstream

  - by Toby Hede

  I have an Nginx and Passenger setup that is proving problematic. At relatively low loads the server seems to get backed up and start churning results like this into the error.log: connect() to unix:/passenger_helper_server failed (11: Resource temporarily unavailable) while connecting to upstream My passenger setup is: passenger_min_instances 2; passenger_pool_idle_time 1200; passenger_max_pool_size 20; I have done some digging, and it looks like the CPU gets pegged. Memory usage seems fine passenger_memory_stats shows at most about 700MB being used, but CPU approaches 100%. is this enough to cause this type of error? Should i bring the pool size down? Are there other configuration settings I should be looking at? Any help appreciated Other pertinent information: Amazon EC2 Small Instance Ubuntu 10.10 Nginx (latest stable) Passenger (latest stable) Rails 3.0.4

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• Understanding what needs to be in place for a server to send outgoing email from a linux box

  - by Matt

  I am attempting to configure an openSuse 11.1 box to send outgoing email for a domain that the same server is hosting. I don't understand enough about smtp servers and the like to know what needs to be in place and working. The system already had Postfix installed, and I confirmed it was running via a > sudo /etc/init.d/postfix status I examined the Postfix config file in /etc/main.cf and configured a couple of items regarding the domain/host name and such, but left it largely default. I attempted to send an email from the command line with the following command: > echo "test 123" | mail -s "test subject" [email protected] Where differentdomain.com was not the same domain as the one best hosted on the server. However, the email never reaches the target account. Any suggestions? EDIT: In the postfix log, (/var/log/mail.info, there's nothing in .err) I see that postfix is trying to connect to what appears to be a different smtp server on our network, with a connection refused: connect to ourdomain.com.inbound15.mxlogic.net[our ip address]:25: Connection refused However, I can't figure out why it is 1) trying to connect to that server and 2) not just sending the messages itself... I mean, isn't postfix an smtp server? I did a grep -ri on ourdomain from /etc and see no configuration files anywhere telling it to do this. Why is it?

  Read the article

• Dual VGA monitors with Quadro FX 580?

  - by dentrasi

  I have a machine with a Quadro FX 580 card (DVI and two Displayport). Attached to it are two 19" Acer screens, which are both (annoyingly) VGA. The first one works perfectly, with a DVI-VGA adaptor. The second one doesn't work. It's got a VGA cable, which goes into a VGA-DVI converted, which then goes into a DVI-Displayport converter. Initally, I was getting 'Cable Unplugged' on the screen, and it couldn't be seen by Windows or the nVidia control panel. After swapping the VGA-DVI adaptor (which works perfectly on another machine), Windows can now see the monitor. The nVidia panel sees the model and native resolution, but I get a constant 'No Signal' error. Switching to the other Displayport makes no difference. I suspect that the card is seeing a DVI connection plugged into it (nVididaCP shows the monitor as having a DVI connection), and it only sending out a digital signal because of this. Does anyone know of a solution (other than trying to get a Displayport-VGA adaptor), or of a way to force the card to see it as VGA? Thanks, ~Dentrasi

  Read the article

• Application losing Printer within Terminal Services for remote users

  - by Richard

  Question: What I need to do is have a permanent link to a printer, normally only accessible through Terminal Services (Printer Redirect), to allow Sage Line 50 layouts to see that printer persistently, even after users have disconnected and reconnected to the Terminal Services session? Although the printer is accessible each time a user connects to the Sage Server via Terminal Services, it is given a different session number and therefore the Sage Layout sees it as a different printer. History behind question: Users using Terminal Services connecting to a Sage Server on a different site Using Sage Line 50 v 15 on that Server Users want to print invoices (sage layouts) locally Sage Server cannot see the users local printers, to get around this user uses the Print redirect features of Terminal Services The individual reports can be edited to point to a specific printer by default. This means the user just has to select an invoice and click print, then select the layout/report wanted and it auto prints that invoice to the default printer specified. The problem occurs because the layouts are edited to point to the users local printer "Ricoh 1018d (session#)", note the "(session#)" as this is the users local printer being redirected through the terminal services session. Users are able to print using the sage layouts once the default printer is setup within the layout and saved, but as soon as the users disconnects from the Terminal Services session and then reconnect in the morning go to print, it has lost the connection to that printer. I understand why its failed, because that the printer is on a per session basis and the layout would not be able to hold on to the connection from a previous session. Thanks in advance for any assistance...

  Read the article

• Getting ZFS per dataset IO statistics (or NFS per export IO statistics)

  - by jkj

  Where do I find statistics about how IO is divided between zfs datasets? (zpool iostat only tells me how much IO a pool is experiencing.) All the relevant datasets are used through NFS, so I'd be happy with per export NFS IO statistics also. We're currently running OpenIndiana [edit] It seems that operation and byte counter are available in kstat kstat -p unix:*:vopstats_??????? ... unix:0:vopstats_2d90002:nputpage 50 unix:0:vopstats_2d90002:nread 12390785 ... unix:0:vopstats_2d90002:read_bytes 22272845340 unix:0:vopstats_2d90002:readdir_bytes 477996168 ... ...but the strange hexadecimal ID numbers have to be resolved from /etc/mnttab (better ideas?) rpool/export/home/jkj /export/home/jkj zfs rw,...,dev=2d90002 1308471917 Now writing a munin plugin to use the data...

  Read the article

• Url rewriting stops working after changing default port on iis7

  - by Somesh

  I have migrated the IIS6 webserver 2003 websites to IIS7 webserver 2008 using msdeploy tool. Application pool setting are changed with "Enable 32-bit Applications=true", "Managed_Pipeline_Mode=Classic","Identity=NetworkService" Framework=v1.1/2.0. All the websites are working fine on default port along with url rewriting migrated from iis6. When I start the webserver on port other than default port by changing bindings, url rewriting stops workings and get 404 error in logs. I think I don't have to change the handler mapping cause I am running it in classic mode. How can I troubleshoot this?

  Read the article

• Forward all tracif from one IP to another Ip on OS X

  - by Josh

  This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

  Read the article

• Cannot connect on TFS 2012 server through SSL with invalid certificate

  - by DaveWut

  I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

  Read the article

• Multiple cable adapter setup not working - VGA to smartphone. All cables tested and work

  - by Christopher Rucinski

  Issue Pictured overhead projector setup does not work. #1 - #2 - #3 - Phone. All cables are tested and work! The issue is the HDMI connection between cable #2 and #3. With all other cables, the screen will automatically be displayed onto the projector screen. No extra work needed. With the pictured setup, the smartphone screen is not displayed onto the projector screen. What is the issue with the HDMI connection?? Background We recently had to do presentations at work (school), but the administration only provided VGA means of hooking up to it. Mostly likely reason probably dealt with cost. Anyways, there are several teachers that have brand new Samsung Series 9 ultrabooks (or similar). You know, the ones without VGA support. So I bought an adapter for those ultrabooks. Cable #5 in the picture below. However, both my coworker and I have been wanting to just display our phone screens on the projector. This I knew would require some extra work. What I have VGA cable to projector (cables go through the wall) For laptops HDMI to VGA cable For laptops MHL adapter For 11-pin microUSB phones microHDMI to VGA cable For ultrabooks 11-pin to 5-pin microUSB adapter For older 5-pin microUSB phones) Equipment Projectors 1 projector with VGA and HDMI input (issue is coworkers forget to switch sources) 1 projector with VGA only input Laptops 2 new Samsung ultrabooks w/o VGA or HDMI support 1 ultrabook with VGA and HDMI support several other laptops with at least VGA support 1 tablet with 11-pin microUSB at least 1 new phone with 11-pin microUSB at least 1 old phone with 5-pin microUSB Tested VGA cable (#1) to laptop Good VGA cable (#1) to HDMI adapter (#2) to laptop Good VGA cable (#1) to microHDMI adapter (#5) to laptop Good Projector to HDMI cable (not shown) to MHL adapter (#3) to Galaxy Note 3 smartphone Good VGA cable (#1) to HDMI adapter (#2) to MHL adapter (#3) to Galaxy Note 3 smartphone Does not work!! Extra Notes The 11-pin MHL adapter will not fit inside the 11-pin to 5-pin microUSB adapter so older phones can be displayed on the screen.

  Read the article

• Unable to login to Amazon EC2 compute server

  - by MasterGaurav

  I am unable to login to the EC2 server. Here's the log of the connection-attempt: $ ssh -v -i ec2-key-incoleg-x002.pem [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8p 16 Nov 2010 debug1: Reading configuration data /home/gvaish/.ssh/config debug1: Applying options for * debug1: Connecting to ec2-50-16-0-207.compute-1.amazonaws.com [50.16.0.207] port 22. debug1: Connection established. debug1: identity file ec2-key-incoleg-x002.pem type -1 debug1: identity file ec2-key-incoleg-x002.pem-cert type -1 debug1: identity file /home/gvaish/.ssh/id_rsa type -1 debug1: identity file /home/gvaish/.ssh/id_rsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'ec2-50-16-0-207.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/gvaish/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: ec2-key-incoleg-x002.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: Trying private key: /home/gvaish/.ssh/id_rsa debug1: No more authentication methods to try. Permission denied (publickey). What can be the possible reason? How do I fix the issue?

  Read the article

• Socket options for a tcp server with 3G clients & frequent disconnections

  - by Joel

  I have a TCP server, written in java, sending and receiving many short messages, from 500 bytes to 100 KB long. It's a chess game and chat server, to make it simple. The server is running Debian 6. Half of the clients are connecting from 3G networks, and half over standard DSL. A portion of the 3G clients lose connection pretty often. The error I get on the server and on the client socket is Connection reset. I have come across this page at Oracle documentation: socketOpt. I am wondering what I could tune there to lower the number of disconnections from 3G clients. I don't mind about the ping or transfer rate, but just about the TCP disconnections. I am not skilled enough to understand the impact of each setting, but I sort of understood that the TCP window was important, although I don't know exactly how. So I'm asking if anyone here has an idea ? Thanks if you can help.

  Read the article

< Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >