Search Results

Search found 11364 results on 455 pages for 'port blocking'.

Page 318/455 | < Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• Can you use a DVI-VGA Adapter on a monitor instead of a video card?

  - by Joel Coehoorn

  I suspect the answer to this is "no", but here goes: I have a monitor with inputs for DVI and VGA. I want to be able to share this display with two computers (one at a time, of course) that both have VGA only. I also have a DVI-VGA dongle that came with a video card that's in a different computer. Can I connect this dongle directly to the DVI port on the monitor so that I can connect both VGA computers? I'd rather not resort to a kvm.

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• How to specify which GCC for MacPorts to use?

  - by penyuan

  I compiled GCC 4.4.3 and installed it in /usr/local/bin, but whenever I install a port via MacPorts 1.8.2 the verbose output says MacPorts is using /usr/bin/gcc-4.2: checking for gcc... /usr/bin/gcc-4.2 How do I make MacPorts find my own GCC 4.4.3? Here is my existing path: /opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/local/lib:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin Thank you! P.S. I am running Mac OS X 10.6.2 Snow Leopard.

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• SSL on app - nginx web server

  - by Adam

  I am running an nginx web server where I redirect all http requests to https (with a self signed cert). Here is how I REDIRECT all http requests to https in the nginx config file: server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; server_name my.server.ip; return 301 https://$server_name$request_uri; Problem is - I cannot seem to do so for an app running on a port. Example: http://my.server.ip:1234 does not redirect to https://my.server.ip:1234 ir works fine on all other urls like http://my.server.ip/temp etc. How can I modify the nginx config file to force that app url through ssl?

  Read the article

• Need help translating rate limiting iptables rules to Puppet format

  - by geoffroy

  I use Puppet Iptables module to manage Iptables rules on my machine. I'd like to implement to rate limit failed SSH connections as described here : Hundreds of failed ssh logins iptables -A INPUT -p tcp --dport 22 -m recent --update --seconds 60 --hitcount 5 --name SSH --rsource -j DROP iptables -A INPUT -p tcp --dport 22 -m recent --set --name SSH --rsource -j ACCEPT Is it possible to translate it to Puppet syntax, such as firewall { '015 drop 5 failed attemps to connect to SSH in a minute ': proto => 'tcp', port => 22, action => 'drop', // what are the other paramters ? } Any help welcome. Best regards Geoffroy

  Read the article

• What is the "real" difference between a NAS and NFS? Or, why pick a NAS device over "mere" NFS?

  - by warren

  From an end-user perspective, what is the difference between a NAS device and using NFS exports from a file server? They seem to accomplish the same end result. The difference between a SAN and other file storage is related (in my experience) to how they are connected to the server infrastructure. However, the difference between a NAS, connecting over a standard ethernet port, and NFS (sharing storage off specific servers, also over the network), seems more nebulous. Is there a good reason to pick a NAS filer over just running NFS on servers?

  Read the article

• unable to transfer files from handy cam to PC

  - by user143989

  I am using a Windows 7 PC,I am using sony dcr -sr88 handy cam . I need to transfer all my videos from handycam to my PC. when i try to connect to the PC through USB. it detects the usb drive in the Handycam on my PC and shows the used memory. But when i open the folder it shows "folder is empty". How i can copy the files? I have tried following: Changed the USB cable CHanged the USB port I can play the videos through handicam, but those files not visible in PC when connected in USB mode. Please help ..bit urgent!

  Read the article

• Other computer can't connect to MySQL Database

  - by user23950

  I have a VB .NET program the uses a MySQL database. It works when the computer that has WAMP installed is the one running the program. The same program now displays an Unhandled Exception error when the computer it's running on does not have WAMP installed (and running). The only thing that is installed is the MySQL connecter net. How can I make this work? I have already tried opening port 20 by configuring the firewall. I did this for both TCP and UDP.

  Read the article

• Arch Linux doesn't mount two USB drive?

  - by unixbhaskar

  One is USB modem which is connected and working and problematic one is a plain vfat USB stick which contain data ....that is the fellow not mounting :( I have tried to see it by fdisk ....it doesn't mount autometically... Is there any UDEV rule for that?? Because I have put a udev rule to remove the usb-storage thing( I had to.. otherwise the usb modem wont get connected... it waits for storage to relase the port) Any idea and solution would be greatly appreciated PS: I am running Arch distribution. Thanks

  Read the article

• cPanel IPTables custom rules

  - by James Haigh

  Hi, I'm trying to allow a host access to port 3306 by IP. I've added the rule and ran an iptables-save and also service iptables save. These commands show as "OK" with no reported errors. And this works absolutely fine. Now, the server hasn't been restarted at all since I've been having this problem, but every day when I start developing on the server that needs mySQL access, it reports that the connection is refused. Back on the mySQL server, all I need to do is service iptables restart and everything then works as normal. The mySQL server is a CentOS cPanel VPS running on OpenVZ. Anyone know how I can make these rules persist? Is it something cPanel is doing overnight that is messing with my config? Thanks.

  Read the article

• How can I apply proxy settings system-wide on Linux?

  - by Sravan

  Our campus employs proxy server with authentication. So, I have to apply http://username:password@proxyIp:port/ bash configure file(suppose for wget or curl) or manually entering details for every graphical application (like gtalk).And also if I work with localhost (XAMPP), I have to configure XAMPP, and so on. If I have my proxy password changed I have to change it everywhere on the system! Is there a way I can apply proxy settings system-wide at one place.Even though I am asking for Linux, I would like to know it on windows also.

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Is there a feature in Nagios that allows Memory between checks?

  - by Kyle Brandt

  There are various instances where there are values I want to monitor with Nagios, and I don't care as much about the value itself, but rather how it compares to the previous value. For instance, I wrote one to check the fail counters in OpenVZ. In this case, I didn't care about the value that much, but rather I cared if the value increased. Another example might be switch ports, I would be most interested to get alerted about the change of state of a port (Although perhaps a trap would be better for this one). For my OpenVZ script, I used a temp file, but I am wondering if there is a better way? Maybe Nagios has some variables that plugins (check scripts) can access that are persistent across checks?

  Read the article

• Manipulating Exchange 2003 shared contacts folder remotely

  - by andybak

  I've got a CRM web app running on a remote server that needs to synchronise it's contacts with the in-house Exchange 2003 shared contacts. Exchange 2003 doesn't appear to support web services. What would the typical approach to this problem be? My initial instinct would be to open port 80 on the Exchange server, run a simple webserver, POST to it and then control Exchange via OLE automation scripting (if that's what people are still calling it!) but there might be a better solution I'm not aware of. Any suggestions?

  Read the article

• Roll standalone JBoss app under Tomcat

  - by Seva Alekseyev

  I've got a Linux box where there’s Tomcat running, with some JSP applications in it. Now, I’ve received a third party app from a developer shop to be eventually deployed. It came as an archive called "jboss7.tar" which, it seems, contained a whole standalone Web server. Once I’ve followed their instructions and run the designated shell script, it would start a server that would listen on port 8081, and app pages are being served up. Still, this strikes me as an inelegant setup. Why run two Web servers side by side, both of them Java-enabled? Also, the manual startup of the standalone app, I don't like that either. The real question is – can I take the user-provided portions from the said archive and somehow plug it under the existing Tomcat instance? It looks like the user code is packaged into files with .war extension, I can see them under /var/jboss7/standalone/deployments.

  Read the article

• reverse-proxy web access on a server where only SSH is allowed

  - by Kaii

  Every once in a while i have to connect to a server where access is highly restricted. Only inbound SSH is allowed by the DMZ firewall - outbound HTTP connections are blocked. I'm looking for a good way to tunnel web access through my SSH session, so i can install updates and software via yum / apt-get. What do you do in such a situation? SSH has the -D <port> SOCKS proxy option. But unfortunately it is one-way only from client to server and there is no reverse option.

  Read the article

• Authenticated proxy in Windows command prompt

  - by tlvince

  My Internet access is delivered through an authenticated proxy. This is setup correctly in the "Internet Options" control panel applet and all browsing/GUI apps work fine. For cmd, proxy settings are typically set by exporting http_proxy. The applications I'm trying to use are git and Putty's pscp.exe. I've tried the following syntax to no avail: set http_proxy=http://username:[email protected]:port/ I've also experimented with Netsh.exe and ProxyCfg.exe with no luck. How does one configure an authenticated proxy in the Windows command prompt?

  Read the article

• Why do people tell me not to use VLANs for security?

  - by jtnire

  Hi Everyone, As per title, why do people tell me not to use VLANs for security purposes? I have a network, where a have a couple of VLANS. There is a firewall between the 2 VLANs. I am using HP Procurve switches and have made sure that switch-to-switch links accept tagged frames only and that host ports don't accept tagged frames (They are not "VLAN Aware"). I've also made sure that the native VLAN (PVID) of the trunk links are not the same as either of the 2 host VLANs. I've also enabled "Ingress Filtering". Furthermore, I've made sure that host ports are only members of a single VLAN, which is the same as the PVID of the respective port. The only ports which are members of multiple VLANs are the trunk ports. Can someone please explain to me why the above isn't secure? I believe I've addressed the double tagging issue.. Thanks

  Read the article

• Seeking recommendations on resolving sporadic network connectivity latency for Notes client

  - by Russell Maher

  I have Domino servers in geographically disperse data centers in the U.S. Sometimes when I open an NSF on one of those servers the connection times out then when I open the NSF again it connects immediately. This has been going on for years and during that time I have upgraded and changed my own internet connection and moved servers to different data centers. Of course I have direct connection documents using fixed IP addresses. When I do a Notes client Trace nothing is out of the ordinary. My business partner experiences the same thing from an entirely different city and different ISP but to the same servers. Never have any trouble connecting to the HTTP server, just over port 1352. Does anyone have any recommendations on a process to determine what is causing this problem?

  Read the article

• Binding backward-kill-word to Ctrl+w

  - by nocturnal

  I'm trying to switch from prolonged use of Tcsh to recent exploration of Bash. I've managed to port over all my favorite features, except for Ctrl+w which treats spaces and slashes as word boundaries, most likely backward-kill-word. In Bash however readline deletes all the way to the first space, deleting all slashes between. I've tried many various combinations of \C-w: backward-kill-word in both .inputrc and .bashrc using bind but I can't get it to work the way I want. Funny enough, through Putty from Windows at work I can use Alt+Backspace, which also the manual says is the default binding, to produce the exact behavior I want. But in Terminal.app on my Macs at home this does not work. Same goes for any FreeBSD or Linux server I happen to be logged into from Terminal.app. So I turn to superuser for help.

  Read the article

• Apache httpd + FreeTDS hangs until restarted

  - by Jordan Reiter

  Every so often requests to a Linux server (say, linux.example.org) where the web app (Django) pulls in data from a SQL Server database via FreeTDS will hang. Requests on other servers pointing to the database still work, as do requests on linux.example.org that use local MySQL databases. Only the server plus FreeTDS appear to be affected. Restarting httpd makes the database connections work correctly again. What could cause this problem? Using: Centos 5.9 freetds 0.91 Apache httpd 2.2.3 /etc/obdc.ini: [DSN] Description = SQL Server 2005 Driver = FreeTDS ;Database = dbname Servername = SERVERNAME ;TDS_Version = 8.0 /etc/freetds.conf: [SERVERNAME] driver = /usr/lib64/libtdsodbc.so host = db.example.org port = 1433 tds version = 8.0 client charset = UTF-8

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• How can I use my own, external IP instead of localhost with Glassfish?

  - by Debopam

  I am using Glassfish v3 to develop couple of servlets. For testing the servlets the localhost:8080/MyServlet is working fine. But whenever I am using IP instead of localhost, its returning an error, saying: Oops! Google Chrome could not connect to xxx.xx.xx.xxx:8080. The address in the Glassfish is already set to 0.0.0.0. I even tried changing the 0.0.0.0 to my IP but the Glassfish is not starting saying the port is not empty. It was not a problem with XAMMP while I used it for PHP development. I am using Windows 7.

  Read the article

< Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >