Search Results

Search found 17870 results on 715 pages for 'screen resolution'.

Page 320/715 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• Can't see more than the first few lines in an SSH connection

  - by hello

  I need some help for SSH buffer size. I have a vista machine at home and i have installed "Free SSHD" on it. I also have Dynamic DNS setup to access some of my home lab equipment which are connected to this vista machine. From my work machine which is an XP machine I connect to my home machine using Putty. Everything up to this point is working fine without any problem. The issue is I can't see more lines than the first few lines of the output. I press the space bar to get more output off the screen and the output scrolls up and it gets lost as the more output gets displayed on the screen. The Putty client i am using on my work machine has been setup with enough buffer size but the output still only displays few lines and as it moves up, the buffer gets empty automatically. I have searched the entire web and haven’t found any proper solution any where. Can someone please help here? Thanks.

  Read the article

• How to distill / rasterize a PDF in Linux

  - by Sampo

  We have a printer at our office that prints PDF files from a USB stick. It prints most files okay, but it has problems with some, especially ones generated with Latex. Some PDFs it simply refuses to print, some PDFs it prints with courier-type font, and some it prints fine except for equations. I'm looking for a way to "distill" PDFs into a dead-sure format to print. Either by simplifying / normalizing the PDF to the point that any renderer will render it correctly, or by simply making each page a 600dpi raster image in the PDF. (I could split the PDF into individual raster images and combine them manually, but I want something scriptable.) The output file size doesn't matter, as long as it's sure to print, has A4 paper size (or the original) and 300~600dpi resolution.

  Read the article

• Monitor has yellow tint when used with the graphics card

  - by artknish

  I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

  Read the article

• ESXi 5.1 - Unable to register host

  - by deanvz

  I download and successfully installed ESXi 5.1. I am however unable to get the licence key I received installed. An error occurred when assigning the specified licence key: The system Memory is not satisfied with the 32 GB of Maximum memory limit. Current with 80.00 GB of Memory. Is there now way around this? A quick google revealed that this is a global problem with no real answer or resolution. The only workaround is to remove the physical RAM chips, but as this is in going to be in production I dont want to do that as it would mean down time when I have to reinsert the memory

  Read the article

• Is it possible to upgrade PHP to 5.3 on a Centos Kloxo installation?

  - by Malachi Soord

  I have a VPS running Centos with Kloxo on and I was wondering how I would upgrade the PHP to 5.3 - It's currently running 5.2.6. When I try and do a yum update I get the following errors: Resolving Dependencies --> Running transaction check --> Processing Dependency: libpq.so.4 for package: lxphp ---> Package postgresql-libs.i386 0:8.3.7-umask.7 set to be updated --> Finished Dependency Resolution lxphp-5.2.1-400.i386 from installed has depsolving problems --> Missing Dependency: libpq.so.4 is needed by package lxphp-5.2.1-400.i386 (installed) Error: Missing Dependency: libpq.so.4 is needed by package lxphp-5.2.1-400.i386 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. Any help would be greatly appreciated.

  Read the article

• IBM WebSphere Host On-Demand (HoD): Cannot run program with "runprogram" command. What can I do?

  - by kokbira

  I access a system that uses an IBM Host on Demand client. I am tryig to create a macro to do a hard task (more than 90,000 keys must be pressed to complete it), but to do it easier I need to call some "external" aplications using "runprogram" tag. But I don't know why it does not function (following IBM help - http://publib.boulder.ibm.com/infocenter/hodhelp/v11r0/index.jsp?topic=/com.ibm.hod.doc/doc/macro/macro.html - did not help...). I am running in Firefox 3.6 and my Java version is jdk1.6.0_20. Below, an example of macro that should function, but didn't. <HAScript name="TEST4" description="" timeout="60000" pausetime="300" promptall="true" blockinput="false" author="wingman" creationdate="05/05/2011 16:14:31" supressclearevents="false" usevars="false" ignorepauseforenhancedtn="true" delayifnotenhancedtn="0" ignorepausetimeforenhancedtn="true"> <vars> <create name="$intReturn$" type="integer" value="0" /> </vars> <screen name="Tela1" entryscreen="true" exitscreen="false" transient="false"> <description > <oia status="NOTINHIBITED" optional="false" invertmatch="false" /> </description> <actions> <runprogram exe= "'c:\\Program Files\\Windows NT\\Accessories\\Wordpad.exe'" param="'c:\\a.txt'" wait="true" assignexitvalue="$intReturn$" /> <message title="" value="'Return value is '+$intReturn$" /> </actions> <nextscreens timeout="0" > </nextscreens> </screen> </HAScript>

  Read the article

• how to correctly download tomcat 6 on centos 5.5

  - by user582862

  hi guys, i am a big confused about how to install tomcat 6 on centos 5.5 final. this is what i am trying to do: # cd /etc/yum.repos.d/ # wget http://jpackage.org/jpackage50.repo # yum install tomcat6 tomcat6-webapps tomcat6-admin-webapps but when i type the widget command, this is what i get: Resolving www.jpackage.org... failed: Temporary failure in name resolution. wget: unable to resolve host address `www.jpackage.org' could anyone kindly show me the right way please. really in trouble at the moment with this. thanks in advance.

  Read the article

• What is the largest flatscreen monitor available for PC use?

  - by Avery Payne

  I'll qualify this specifically (by order of preference): must have the highest diagonal measurement, widescreen or "normal" aspect ratio doesn't matter here, just the diagonal. must have the highest resolution available, which means 72 inches of 1280x1024 won't cut it. must not have a TV tuner built into it, I'm not looking for a TV set, this is a monitor! must be available at a retail outlet that caters to the general public, i.e. Best Buy, Sears, Costco (all of these examples are in the U.S., although you can suggest something from whatever chain is in your area/nation/geography). Non-retail or non-physical venues like eBay, or businesses that only cater to other businesses, do not qualify under this requirement. I should be able to walk into this place and purchase it, not just whip up an order online. If you are unsure about this requirement, just ask yourself: can I physically see it before I open my wallet and purchase it?

  Read the article

• Is there a remote desktop or vnc app for the IPad that properly handles Bluetooth keyboard shortcuts?

  - by Steve Bison

  I've tried 4 or 5 remote desktop apps, the most notable being Jump Desktop and Splashtop Streamer. Most of these remote desktop apps have some sort of on-screen keyboard for typing with the IPad, including special keys like shift, control, alt. The special keys act like "sticky keys" meaning they stay depressed until another key is pressed, to make it easier to do key combinations. Even non-standard keyboard combinations like shift+enter work, in this sticky sense. When using a Bluetooth keyboard with the remote desktop apps, both Jump and Splashtop Streamer recognize the shift + letter combination for doing capital letters. However, generically pressing shift, cntrl, or alt does not depress the sticky on screen shift buttons or do anything at all. Only a few combinations are recognized (again like shift+letter, cntrl+C). Most combinations do not work (shift+enter, alt+tab). Even having the keyboard shortcuts work like sticky keys (press shift then enter, not both at once) would be much better than the limited functionality they have now. Is there an app, jailbreak app, or workaround that lets me use bluetooth keyboard properly with remote desktop on the ipad?

  Read the article

• Boxee on Dell 32in TV causes headaches, how to troubleshoot?

  - by brown145

  I have revamped an old pc, installing 4GB ram and a 256MB video card so that I could run Boxee to a Dell W3200 series TV that came with my apartment. It is connected via VGA, resolution is 1360x768, 24bit color, 60Htz refresh rate. Unfortunately, every time I use it I end up with a headache after less that 30 min. I have had my eyes check recently, and am able to play xbox (connected via hdmi) on the same TV without problems. What are the potential causes? My system seems to well meet or exceed the min requirements for boxee, XP, AMD Atholon 64 X2 Dual Core, 4GB RAM. Could it be the VGA cable? What is the most cost effective way to trouble shoot?

  Read the article

• Need an idiot-proof picture resizing program for Windows.

  - by marcusw

  My friend needs to resize some pictures as part of a web publishing job, but he is rather clueless when it comes to computers. I am in charge of teaching him how to do this, but only have Linux (albeit with Wine installed) at my disposal for testing. Could you guys recommend a fast, easy, batch-capable, and hopefully open-source program that will resize pictures to the resolution he wants? It doesn't have to be anything fancy, but it needs to be quick and easy to use. Thanks!

  Read the article

• What to do with old laptop screens?

  - by Lord Torgamus

  This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

  Read the article

• Acer Aspire Touchscreen Not Responding

  - by Jerry

  I have an Acer Aspire z3101 all-in-one Touch screen running Windows 7 Home Premium. I am unable to get the screen to respond to my touch. I have checked the system and all drivers are ok according to comp. Using the settings to setup the pen and touch and to calibrate does not work. My touch brings no response at all. I had reinstalled the applications - Windows Touch Pack and Acer Touch Portal which didn't help. Today I done a complete reinstall returning comp back to factory settings and still there is no response. At first I thought that perhaps a driver or file was missing but now doubt that due to the reinstall not helping. Have you any idea what could be causing this problem? I am now at the stage of pulling my hair out and haven't had too much help from Acer. I have had the computer for just over a year now and so it is no longer under guarantee and this has me very worried due to my being unemployed. Any help is much appreciated. Thank you.

  Read the article

• How can I get Windows to apply its settings?

  - by Jouke van der Maas

  I have a computer with a major problem; it gives a blue screen when the login screen loads. I've been using this guide to troubleshoot the issue, and now I've run into a problem. I have determined the issue is not bad memory or a bad hard drive. According to the guide, this means the problem is in the OS. I've tried to follow the steps, but Windows (Vista SP1) somehow doesn't remember any changes. On every reboot, the computer is in exactly the same state it was in before. Any changes to system settings or files won't be recorded. As this means I can't check what is causing the problem, I can't fix my PC. Is there a way to find out what's causing this? Is it just a mode Windows goes into to protect itself, or is it some other problem? Anything to help troubleshoot will be of great help here. PS. I'm kind of new to this site. If I messed up, please tell me in the comments.

  Read the article

• Ubuntu 11.04 fresh install - "Input signal out of range" or "Mode not supported..."

  - by Dennis

  I recently installed Ubuntu 11.04 using a CD .iso. Installation went fine. Upon completion I rebooted and after a second or two I got a black screen with the message "Input signal out of range". And there it sits... Read a few things about how this could be related to screen resolution, refresh rate, etc. For the heck of it I tried a different monitor. The result is the same but the message provides some clues - "Mode not supported - H:92.7kHz, V:58.3Hz" (the latter is Hz; not kHz). So my thought is that I should probably be able to use the 11.04 install disc to "Try out Ubuntu", find and edit some file that was created by the install with the correct values. Problem is, I am not too sure what I am supposed to edit. Looked at the xorg.conf file but this is so minimal at this point I am not sure it is where I want to go. By the way, the monitor is an I-Inc ix191a. Anyone have any ideas on how to get around this?

  Read the article

• Converting massive images to PDF, without crashing applications

  - by BloodyIron

  I'm trying to work with a large-format scanner, and we are scanning very long documents. Example, one of our documents we cut into two pieces, and one of those pieces is 3633x82486 in resolution. My application, Scanning Master 21+, which comes with the device (Graphtec CSX300-09) can output PDF, however when I try to save to PDF it complains about file being too large. I can successfully output to BMP however. GIMP can even open this BMP, after taking a while to load it. The resulting files range from 200MB - 1.2GB in size. Acrobat refuses to open the BMP format, saying it isn't supported or is damaged (which I know is not true). As I mentioned, the PDF plugin for GIMP crashes when I try to export to PDF. I'm really not sure what is the best tool for this job. So what is the best tool to produce PDF documents of very large images?

  Read the article

• How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

  - by goober

  Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• Are these three brand new sticks of RAM really dead?

  - by David Brown

  I'm working on a Dell Dimension 4700 desktop for a friend. It came with 512MB of DDR2 RAM (two sticks of 256MB). One morning, it started blue screening on startup with no helpful error messages. It refused to boot into any form of Windows installation, including Safe Mode, original recovery disk, and my custom Windows PE disk. It did boot into the Ultimate Boot CD, so I ran memtest86, which reported errors everywhere. I removed one stick of RAM and the system booted up just fine. I moved the remaining stick into each slot and the system continued to operate normally, so I came to the conclusion that the stick that I removed was dead. I ordered an exact replacement, along with 2 more sticks of 256MB DDR2 (again, exactly the same as the original), bringing the total system memory to 1GB. Upon installing the three brand new sticks, the system blue screened again, this time stating that win32k.sys attempted to write to read-only memory. I inserted my custom Windows PE disk in order to get a better look at the memory dump with BlueScreenView, but it refused to boot and produced another blue screen, but without an error message. I removed each new stick one-by-one, restarting each time. It continued to blue screen until I was left with only the original stick. I then tried inserting the new sticks in various different orders, but this only produced more blue screens. I reinserted all three sticks (along with the original) and ran memtest86 again, which reported errors all over the place. So, now I'm right back where I started. I don't think it could be the slots themselves, because I can plug the original stick into any slot and it works just fine. System setup reports each stick correctly and shows the total as 1GB, however. It just seems strange to me that all three brand new sticks of RAM could be dead on arrival. Is there something I missed? Or should I just go ahead and RMA them?

  Read the article

• troubleshooting really slow login on a (linux) machine

  - by Peeter Joot

  Within the last couple of weeks, any attempt to login to a specific linux server has gotten really slow. Once I've logged in, things appear to run without significant delay, but some other login like activities (like starting a new screen session) are slow. The machine's been rebooted a couple of times recently and that hasn't helped. , and it doesn't appear to be $PATH search (where $PATH can sometimes include bad NFS mounts), which I've seen historically in our environment. I've also tried completely removing my .profile/.bash*/... type of init files to rule out anything bad there. I also see slow login for at least one other userid on the system. One thing I've noticed is the following message when trying to exit from a screen terminal: Utmp slot not found -> not removed and am wondering if this is related (having a vague recollection that Utmp has something to do with login). Any idea what that message means, or how to fix it, and if it would be related? Failing that, what sort of problem determination tools are available to investigate what is slowing down this login process?

  Read the article

• How can I create a separate toolbar from the Task Bar?

  - by Iszi

  In Windows XP, you could separate toolbars from the Task Bar by dragging them to the desktop. They could then be left lying about anywhere on your screen or, my preferred option, docked to any side of the screen. I found this particularly useful to keep a handy list of common phone numbers quickly accessible. I'd create a new toolbar pointing to a custom folder, and put a bunch of dead shortcuts in the folder that had names and numbers as their file names. I'd then dock the toolbar to the left side, set it to auto-hide and always on top (options which could be set separate from the Task Bar as well) and it would be readily available no matter what else I was doing on my system. However, on my Windows 7 system, I seem unable to perform the crucial step of pulling the new toolbar off of the Task Bar. This is of course with the Task Bar "unlocked" so that I can move all my toolbars around. Is there something I'm missing here, or is this a feature that's been disabled in Windows 7? Is there any way to re-enable it, or otherwise achieve similar functionality? I'd rather be able to do this without additional software, if possible.

  Read the article

• How can HAProxy improve availibility, or "how can I prevent my site from going down"? [closed]

  - by Joe Hopfgartner

  I am aware of what HAProxy does, but what if my HAproxy goes down? Or what if my DNS servers go down? Yes, dns is less the problem. However dns only solves to an IP and an IP is announced via BGP to be routed over some router. What if that router goes down? Of course if I have complicated application servers that are likely to fail HAProxy can significantly improve uptime. But my application isnt. In fact my application may very well just be delivering a small static html file via HTTP. Basically if any user anywhere types in MYDOMAIN.COM, I want the user to get SOMETHING on the screen other than a timeout or DNS resolution error. How can I do that? The point of entry is difficult. The so called "initial closure mechanism".

  Read the article

• Can GNU sed (for Windows) handle Unicode? If so, is it a code-page/locale issue, or a switch?

  - by Peter.O

  I've been using GNU SED on and off for a couple of years now. It spins me out a bit sometimes, but it does a good job... for single-byte char sets! I now and then notice references to GNU SED being Unicode-aware, but the closest I've seen of this is its "binary" mode.. and binary is not Unicode. Can GSED process a Unicode text file at CodePoint resolution, including and especially \r\n (Windows)... and if it can, does it expect UTF-8, UTF-16, or what? and how does SED detect the encoding?

  Read the article

• Windows 7: blue faces in VLC... sometimes

  - by Mala

  There are a bunch of forum posts about this issue from the last several years but no resolution that I could find. I have the newest VLC installed on Windows 7 with the newest nvidia drivers. Suddenly, VLC plays some videos in such a way as faces are blue. When viewed in another media player, or when looking at the thumbnails, this is not an issue. Other videos are not affected. I've tried resetting VLC options, deleting the VLC folder in the AppData area, etc. I have no other color issues. Does anyone have a fix?

  Read the article

• setting up a second monitor in centos

  - by Rob

  I have CentOS installed on my laptop. I hooked up my TV via VGA and it works, just not as I'd like it to. The left side (on the tv) is cut off, like the image is justified too far left. I want it to be centered, but I also want to use a different resolution. You see, I use a netbook, and thus my laptop screen is tiny, meaning some things cant fit in the same window without scrolling. I want my TV to fix that for me.

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >