Search Results

Search found 10515 results on 421 pages for 'automatically'.

Page 322/421 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

• Wireless signal changes from strong to weak after connecting

  - by gibberish

  Router (primary AP) is a WRVS4400N, WAP (signal booster) is a WAP4410N. Problem: User is physically located within ten feet of WAP (200 feet from main wireless router). Signal is at 5 bars as user connects to wireless network. Within seconds, signal is at or below two bars and connection is poor. Background: Trying to solve problem of weak wireless signal in back offices. Desired result is for client laptops to automatically switch to the stronger signal. WAP is connected to network via Ethernet cable. WAP is set to AP mode (instead of Wireless Repeater mode) WAP does appear to boost signal. Using Windows 7 sys tray Connect To A Network applet, can observe signal boost as laptop approaches the WAP. Above-described problem happens to users located near or beyond the WAP. It does not happen to users in close proximity to the router. Secondary Question: If using WAP in AP Mode, do WAP and Router (primary AP) need to be on the same channel?

  Read the article

• My bios datetime is resetting to 2002, what should I do?

  - by Thierry Lam

  I bought my PC brand new in mid-2006. I'm currently dual booting Win XP 32 bits and Ubuntu Karmic Desktop. Over the last few days, when I boot up my computer, it tells me that my bios time is not set. I now have 2 choices for booting in: Windows first: I can safely get into Windows but the date now shows 2002/01/01 at 00:00. From there, Windows will not sync its time to its servers, I have to manually advance the date myself. I can also advance the date from the bios at startup. Ubuntu first: Since the time date is still set at 2002, the boot system cannot find my linux partition. I can fix that issue by booting to Windows, set the date properly and the linux issue will be fixed automatically. The above two issues can also be fixed if I manually set the bios date/time manually when I turn on my computer. It's annoying to do that every single day since I shut down my PC daily. Am I having an OS issue or a hardware issue? How can I resolve this problem?

  Read the article

• Sending e-mail on behalf of our customer(s), with Postfix

  - by NathanE

  We send e-mail on behalf of our customers, via our own SMTP services. It's always been a problem for us because usually our "spoofing" of their source address results in the mails being caught in spam traps. This hasn't been a problem in the past due to the small volume and low importance of these mails that we sent. However this requirement has recently changed and we need to fix this issue. We realise that fundamentally our application is sending e-mail incorrectly, as per this post: Send email on behalf of clients However, we would like to resolve the problem at the SMTP server level. We have deployed a server running Postfix. Is it possible to have Postfix automatically adjust the mail headers so that we get this "Sent on behalf of" behaviour? I figure it should just be a case of Postfix noticing that the FROM address is the spoofed (i.e. a domain that is not mentioned in its config anywhere) and therefore inject/replace the appropriate headers to get the desired effect. Thanks.

  Read the article

• How can I make grub2 boot into Windows 7?

  - by Grzenio

  I had Windows 7 installed on my system, then I installed Debian testing with grub2 as its boot manager. Initially I couldn't see windows entry in grub at all, so I ran: aptitude install os-prober kcpuload update-grub Now I can see the entry, but when I select it I get only Win7 system restore, instead of the the real thing. Any ides how to make it work? EDIT: I tried the suggested approach to add a new file to /etc/grub.d, which generated an entry in grub.cfg, but it does not appear in the grub menu on boot :( I have this: grzes:/home/ga# cat /etc/grub.d/11_Windows #! /bin/sh -e echo Adding Windows >&2 cat << EOF menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And I have the following grub.cfg file: grzes:/home/ga# cat /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } insmod ext2 set root=(hd0,3) search --no-floppy --fs-uuid --set 6ce3ff31-0ef7-41df-a6f5-b6b886db3a94 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi set locale_dir=/boot/grub/locale set lang=en insmod gettext set timeout=5 ### END /etc/grub.d/00_header ###

  Read the article

• Use autocomplete in dropdown cells with Excel 2007?

  - by Martin

  I want to make a survey with Excel and I therefore have defined the cells for the answers as a dropdown cell which only accepts answers from a certain list, e. g.: The two Lists List1 and List2 (yellow cells) are the possible answers for the questions in Block 1.x resp. 2.x (blue) . There might be a block 4 with more questions, which again use List1 for their possible answers. My problem is: I'd like to be able to use the autocompleate feature to fill in the blue cells with the dropdown menu, so that the user only types 5 and it automatically expands to "5: extremely important" or "5: extremely difficult". According to my research on the www, this should be possible if I add the list with possible answers directly above the cells where autocomplete should work (I did this with the green helper cells which could be hidden) . But I have to enter at least 4 characters 5: e to get the autocompleted suggestion. Is there a way to make autocomplete already replace a "5" by the corresponding valid term? As the survey file shall be distributed to a lot of people "outside", I can not use VBA magic because it may be blocked on their computer and might not work. EDIT: it seems to have to do with the numbers I use: If I'd start my List items with A, B, C instead of 1, 2, 3, it would work perfectly. Excel seems to ignore the pure numbers when they are entered and does not try to autocomplete them.. is there a workaround? (I hope it is clear what I want, it seems a little difficult to explain.)

  Read the article

• Windows shutting down, CPU maxing out in Windows-7 32-bit? [closed]

  - by Vivek Sharma

  I have no idea, what is happening to my laptop. For last 5-6 times it has automatically shutdown while running, without doing anything serious. And I even do get the message during boot which says - Start windows normal - Start in safe mode It just boots up normal. Few days ago, my screen blinked and it the PC shutdown immediately. After that I was not able to get it started. I got it repaired, the guy said he has replaced the display chip (nVidia-nvs-140), but i seriously doubt that. Now it started working, but would shutdown every 20 mins or so. I have a dual boot, ubuntu-11.10 works just fine. Virus scan on windows shows nothing. I am pasting my perfmon output. My CPU for reason is maxing out to 100% continously, for windows internal processes. Please have a look at the attached file. Strangly now for last 2 hours it is working fine, but i am just writing emails and reading excels. ThinkPad T61 | t9300 | 3gb | nVidia 140 nvs-quadro (latest driver 296.10) What do you suggest?

  Read the article

• Send command through PuTTY automatic login

  - by Arthur

  I am using the following to login automatically to a remote server and then run commands listed in a commands.txt, like this: C:\path to\putty.exe -ssh adreese.ip -l user -pw Password -m C:\Path to\command.txt commands.txt contains the following: wakeonlan -i broadcast adress Macadress However, when I try to do so a new window for PuTTY appears, but it closes and exits instantly after login. As a result, I cannot see the output of the command(s). After a several tests, it appears that the command is not execute , cause my computer doesn't "wake on lan". I don't understand what's going on here ? I cannot use the plink.exe program cause I cannot make connection with public key ( too much distant site for doing all the registration keys in putty ) Can someone help me with this ? Or can i use another program to make ssh connection and send command with script from a windows os? Edit : I also try to make a bash file in the distant server with the same command and execute it from the session like this : C:\path to\putty.exe -ssh adreese.ip -l user -pw Password \home\user\script.sh Ihave the same problem... Need help please : /

  Read the article

• How can I use my cell phone to establish a dial-up networking connection?

  - by gWiz

  I am using Windows 7 and have a BlackBerry with T-Mobile (U.S.). I have paired the phone with my computer over Bluetooth, which automatically creates a serial port for it. I am able to open the port in PuTTY and successfully issue AT commands to the modem, including dialing. However, while using Windows to create and establish a Dial-Up Networking connection, I get an error dialog stating "Error 678. The remote computer did not respond." In my testing, I also tried setting up a connection to dial a number connected to a phone. When attempting to connect over this connection, the phone does ring but the very moment I answer the call, my computer displays the above error dialog. What must be done to successfully establish such a PPP connection? Some special AT initialization string perhaps? To clarify, I'm not referring to the well-described and popular technique known as "tethering," in which the remote host of the data link is the mobile service provider. I am interested specifically in establishing direct data links with remote hosts other than my mobile service provider. Think old-school landline connection to your friend's computer or BBS. Edit 1 As grawity pointed out in comments, the missing piece of the puzzle is the actual modulator that is compatible with v-series protocols, which I expected to be built into the cellphone. So far the best only software alternative I could find is this experimental project. Edit 2 Found this forum discussion today. The participants state that there is no old-school modem in the BlackBerry. Edit 3 When I place a call in PuTTY with ATD, immediately after the call is answered (and the callee is initiating the handshake) the cellphone returns OK. This is not the expected behavior for establishing a data connection. The phone should reciprocate the handshake, and upon success return CONNECT. (Alternatively it should return BUSY or NO CARRIER, but never simply OK.) Windows DUN must be interpreting this as the "Error 678" I was seeing.

  Read the article

• Auto Launching PHP-FPM

  - by Seth

  My plist file <?xml version='1.0' encoding='UTF-8'?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > <plist version='1.0'> <dict> <key>Label</key><string>org.macports.php-fpm</string> <key>ProgramArguments</key> <array> <string>/opt/local/bin/daemondo</string> <string>--label=php-fpm</string> <string>--start-cmd</string> <string>/opt/local/sbin/php-fpm</string> <string>;</string> <string>--pid=fileauto</string> <string>--pidfile</string> <string>/opt/local/var/run/php-fpm/php-fpm.pid</string> </array> <key>Debug</key><false/> <key>Disabled</key><true/> <key>OnDemand</key><false/> </dict> </plist> After rebooting, it's not loading up automatically. I still have to manually start php-fpm. I have tried unloading and adding RunAtLoad etc. with no luck and tried both these launchctl commands. sudo launchctl load -F /Library/LaunchDaemons/org.macports.php-fpm.plist sudo launchctl load -w /Library/LaunchDaemons/org.macports.php-fpm.plist

  Read the article

• Network topology for both direct and routed traffic between two nodes

  - by IndigoFire

  Despite it's small size, this is the most difficult network design problem I've faced. There are three nodes in this network: PC running Windows XP with an internal WiFi adapter.Base station with both WiFi and a Wireless Modem (WiModem)Mobile device with both WiFi and WiModem The modem is a low-bandwidth but high-reliability connection. We'd like to use WiFi for high-bandwidth stuff like file transfers when the mobile is nearby, and the modem for control information. Here's the tricky part: we'd like the wifi traffic to go directly from the mobile to the PC, as rebroadcasting packets on the same WiFi channel takes up double the bandwidth. We can do that with a manual configuration by giving the both the PC and the base station two IP addresses for their WiFi interfaces: one on a subnet shared with the mobile, and one on their own subnet. The routes on the PC are set up so that any traffic going to the mobile via WiModem goes through the secondary IP address so that return traffic from the mobile also goes through the WiModem. Here's what that looks like: PC WiFi 1: 192.168.2.10/24 WiFi 2: 192.168.3.10/24 Default route: 192.168.2.1 Base Station WiFi 1: 192.168.2.1/24 WiFi 2: 192.168.3.1/24 WiModem: 192.168.4.1/24 Mobile WiFi: 192.168.3.20/24 WiModem: 192.168.4.20/24 We'd like to move to having the base station automatically configure the mobile and PC, as the manual setup is problematic when you start having multiple mobiles and PCs. This means that the PC can only have 1 IP address and needs to be treated as being pretty simple. Is it possible to have a setup driven by DHCP on the base station that is efficient with bandwidth?

  Read the article

• On clients use generic driver for printer shared by CUPS

  - by Daniel

  I know this worked really easy with a recent CUPS version some years ago. Unfortunately I fail to do the following with latest CUPS nowadays. How to share a printer without using printer specific drivers on the clients with CUPS? The printer is a Samsung ML-2010. The important fact is that it needs a quite specific library for printing called splix. That is installed on the server and prints well. What makes trouble is using that printer over the network. I found out how to use Avahi under Linux to make use of DNSSD to advertise and discover printers. But as far as I understand the new CUPS offers the internal driver interface on the network. This has 2 major issues: anybody can fiddle with the driver and I don't trust any uncommon printer library to be "network secure" anyone who wants to use my printer including guests needs to install the specific drivers first I remember the old days when I could enable "Share this printer" on the CUPS server and all clients would magically detect the printer and just send their job data to the server and have it do the driver stuff. After everything a read I guess this is related to the changes Apple introduced with CUPS including dropping of the integrated network discovery protocol. If it helps: Server: Ubuntu LTS 12.04 Server with CUPS 1.5.3 Client: Arch Linux with current CUPS 1.6.1 On another box with Ubuntu the printer was setup automatically at least but the mechanism used the Splix library for that.

  Read the article

• How can I avoid my web browser from redirecting to localhost using WAMP in Windows7?

  - by Josh

  I'm currently using Windows 7 with WAMP to try and work on some software, but my web browsers will not accept cookies from the "localhost" domain. I tried creating a few bogus domains in my hosts file by pointing them to 127.0.0.1 but when I type them in I am automatically redirected back to localhost. I have also configured virtualhosts in apache to correspond with the domains I added to the hosts file and it still redirects back to localhost. Is there anything special I must do on Windows 7 to get around this localhost redirect? Thanks for looking :) I'll include my host file here: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost 127.0.0.1 magento.localhost.com www.localhost.com Thanks for looking :)

  Read the article

• Ubuntu 10.04 network manager issues

  - by Shark

  I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

  Read the article

• Offline productivity

  - by Frank Meulenaar

  On some days I'm commuting 2hs (oneway) in the train. I don't have any mobile internet nor is there always WiFi service in the train. Because of security reasons I can't do any work in the train so I'm trying to work on my geek time. I'm looking for general solutions on how to do this (I'm on FireFox/Windows but I don't think it matters) Email works perfectly with gmail offline. It syncs directly when online and remembers complicated stuff. So far I used the ScrapBook plugin to store an website. It works good, but I have to download my favorite news page every day again - I want it to sync as soon as possible. It would even be more awesome if I could click a page on my desktop and my laptop would sync as soon as it has the chance. (edit: maybe the autosave plugin for scrapbook can do this) Similarily, I use the Downloadhelper plugin to download youtube vids, but I'd like something that automatically downloads videos from a given channel. Any tips are welcome. So far my early morning schedule is: wake up, power on laptop, make coffee, power off laptop and leave within 10 minutes (enough time for GMail to sync) but I can imagine a system where my laptop stays on during the night (or boots before I wake (and makes me coffee :])).

  Read the article

• Azure Virtual Machines - what fault tolerance do they provide?

  - by Borek

  We are thinking about moving our virtual machines (Hyper-V VHDs) to Windows Azure but I haven't found much about what kind of fault tolerance that infrastructure provides. When I run VHD in Azure, I've got two questions: Is my VHD and all the data in it safe? I think that uploaded VHDs use the "Storage" infrastructure so they should be automatically replicated to multiple disks and geographically distributed but should I still make a full-image backup just to be safe? (Note that of course I will be backing up the actual data inside VMs that I care about; I just want to know if there is a chance greater than 0.0000001% that one day I will receive an email from Microsoft telling me that my VM is gone and that I should create or restore it from scratch). Do I need to worry about other things regarding the availability of my VMs? I mean, when I have an on-premise server I need to worry about the hardware itself, about the host operating system, what would happen if my router failed, if my Hyper-V's C: drive failed etc. Am I right in thinking that with Azure, their infrastructure takes care of all of this? Thanks.

  Read the article

• How can I totally flatten a PDF in Mac OS on the command line?

  - by Matthew Leingang

  I use Mac OS X Snow Leopard. I have a PDF with form fields, annotations, and stamps on it. I would like to freeze (or "flatten") that PDF so that the form fields can't be changed and the annotations/stamps are no longer editable. Since I actually have many of these PDFs, I want to do this automatically on the command line. Some things I've tried/considered, with their degree of success: Open in Preview and Print to File. This creates a totally flat PDF without changing the file size. The only way to automate seems to be to write a kludgy UI-based AppleScript, though, which I've been trying to avoid. Open in Acrobat Pro and use a JavaScript function to flatten. Again, not sure how to automate this on the command line. Use pdftk with the flatten option. But this only flattens form fields, not stamps and other annotations. Use cupsfilter which can create PDF from many file formats. Like pdftk this flattened only the form fields. Use cups-pdf to hook into the Mac's printserver and save a PDF file instead of print. I used the macports version. The resulting file is flat but huge. I tried this on an 8MB file; the flattened PDF was 358MB! Perhaps this can be combined with a ghostscript call as in Ubuntu Tip:Howto reduce PDF file size from command line. Any other suggestions would be appreciated.

  Read the article

• Enable bitlocker an save key to share

  - by user273694

  I have searched all over the web but cannot find a complete answer to this: How to enable Bitlocker on a laptop with TPM, and store a file with the Bitlocker recovery key and TPM password by USING THE manage-bde command line tool. The file should be the same as when created in the Bitlocker manager UI. I DO NOT want to save to AD. The same question was asked here but was not answered correctly. The goal is to write a script to be used with an endpoint manager. I have tried the following: manage-bde -on C: Works fine, but does not create or save a key. manage-bde -on C: -rk C:\myfolder\ and manage-bde -on C: -RecoveryKey C:\myfolder\ -rp The output from the last two methods state that a key has been saved to c:\myfolder and so on, but that is not the case. It also says that I have to: Save the password in a secure location Insert a USB flash drive with an external key file into the computer. Restart and run hardware test type "manage-bde -status" to check if the hardware test succeeded After a restart, I get an error saying that Bitlocker could not be enabled because the bitlocker startup key or recovery kpassword cannot be found on the USB device.... C: was not encrypted. Why am I asked to insert a USB?? I simply want to encrypt the hard drive and save the recovery information to a file automatically. Is that too much to ask? Help please!

  Read the article

• Postfix auto create Maildir

  - by Eugene

  I've been beating my head against a wall for a while now on this one. Basically, here is the rundown: Our MX record points to a frontend SMTP server, which contains aliases for actually routing the mail. No alias, no access to the backend storage server, which is what our clients connect to. I'm upgrading the backend email server. Currently, a user is created for every email user on the server, which creates the mailbox. On the new server, everything autheticates through PAM to an LDAP server (all of which is working properly). My goal is to get Postfix to create the Maildir directory for the user automatically. This works fine when I have the /home directory with 777 permissions, but for obvious reasons, this should be avoided. I would like to do this with 775 permissions on /home with a group owner of whatever user Postfix is running as, but I can't seem to figure out what user to use. With the 777 permissions, the /home/$user/Maildir directory is created on message delivery. Does anybody know how I can do this without 777 permissions? The system I am working on is a 64-bit Debian Lenny 5.07 install. Any advice would be appreciated.

  Read the article

• Can't see more than the first few lines in an SSH connection

  - by hello

  I need some help for SSH buffer size. I have a vista machine at home and i have installed "Free SSHD" on it. I also have Dynamic DNS setup to access some of my home lab equipment which are connected to this vista machine. From my work machine which is an XP machine I connect to my home machine using Putty. Everything up to this point is working fine without any problem. The issue is I can't see more lines than the first few lines of the output. I press the space bar to get more output off the screen and the output scrolls up and it gets lost as the more output gets displayed on the screen. The Putty client i am using on my work machine has been setup with enough buffer size but the output still only displays few lines and as it moves up, the buffer gets empty automatically. I have searched the entire web and haven’t found any proper solution any where. Can someone please help here? Thanks.

  Read the article

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• Recovering ZFS pool with errors on import.

  - by Sqeaky

  I have a machine that had some trouble with some bad RAM. After I diagnosed it and removed the offending stick of RAM, The ZFS pool in the machine was trying to access drives by using incorrect device names. I simply exported the pool and re-imported it to correct this. However I am now getting this error. The pool Storage no longer automatically mounts sqeaky@sqeaky-media-server:/$ sudo zpool status no pools available A regular import says its corrupt sqeaky@sqeaky-media-server:/$ sudo zpool import pool: Storage id: 13247750448079582452 state: UNAVAIL status: The pool is formatted using an older on-disk version. action: The pool cannot be imported due to damaged devices or data. config: Storage UNAVAIL insufficient replicas raidz1 UNAVAIL corrupted data 805066522130738790 ONLINE sdd3 ONLINE sda3 ONLINE sdc ONLINE A specific import says the vdev configuration is invalid sqeaky@sqeaky-media-server:/$ sudo zpool import Storage cannot import 'Storage': invalid vdev configuration I should have 4 devices in my ZFS pool: /dev/sda3 /dev/sdd3 /dev/sdc /dev/sdb I have no clue what 805066522130738790 is but I plan on investigating further. I am also trying to figure out how to use zdb to get more information about what the pool thinks is going on. For reference This was setup this way, because at the time this machine/pool was setup it needed certain Linux features and booting from ZFS wasn't yet supported in Linux. The partitions sda1 and sdd1 are in a raid 1 for the operating system and sdd2 and sda2 are in a raid1 for the swap. Any clue on how to recover this ZFS pool?

  Read the article

• How is network mounted software executed?

  - by CptSupermrkt

  I would like to understand how network mounted software works. For example, at my place of work, we have a software server. Each client machine (hundreds of them) automatically mounts directories from the software server on boot. For example, a program like Matlab is installed just once on the software server, but each client machine can start up an instance of Matlab. What is going on under the hood? Let's say I run /opt/bin/matlab and /opt/ is mounted from the software server, what happens when I press Enter to execute matlab on a client machine? The process is on the client machine, and I've already narrowed down that there isn't any implicit or hidden file transfer (i.e. copying matlab to my machine temporarily for that session) by running matlab on a computer with nearly zero disk space (i.e. not enough room to transfer). Since Matlab was installed on the server, how is my client computer executing it? What mechanism is controlling this? What is happening behind the scenes?

  Read the article

• program to track recent saved files or downloads?

  - by DiegoDD

  Back to windows XP times, i used a program named Ava Find that can find any file in the system, but a really nice feature it had, called "scout bot" that automatically finds new files, that is, recently created. More info here: AvaFind For example, if i saved or downloaded a file (in any program), but i cant remember its name or where i put it, i just simply looked at the scoutbot list, and it showed me the most recent files, and then i could just open them from there, or jump to their path. Since i changed to windows 7 (passing through vista), the program no longer works. It simply keeps indexing forever and never finds anything. I don't know if it is not compatible with win 7 itself, or because the fact that my windows 7 is 64 bit. I already tried to contact the Avafind creators, but they never answered, and the program seems to be no longer supported (although the site still works). Now, is there a similar program that finds RECENT files? e.g. listing the most recently saved files, system-wide (or even limiting it to some folders, discs)? And that of course, that is confirmed to work with win 7 64 bit. I know that there are many programs that can find any file, like everything, but what i want is to find recent files and their paths, without knowing their name or e. "everything" also can sort results by date, which is almost what i need, simply to look for part of the file name or extension, and get the most recent one. but if i get to many results, it takes a while, plus, i STILL need to know the name or at least extension of the file. What i want is simply a "Most recently Saved files" tool. i.e., a replacement for Scout Bot in Ava Find. Do you know any alternative?

  Read the article

• proftpd initial directory for each user

  - by Dels

  After successfully setting up proftpd server, i want to add initial directory for each users, i have 2 user, webadmin that can access all folder and upload that can only access upload folder ... # Added config DefaultRoot ~ RequireValidShell off AuthUserFile /etc/proftpd/passwd # VALID LOGINS <Limit LOGIN> AllowUser webadmin, upload DenyALL </Limit> <Directory /home/webadmin> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser webadmin </Limit> </Directory> <Directory /home/webadmin/upload> <Limit ALL> DenyAll </Limit> <Limit DIRS READ WRITE> AllowUser upload </Limit> </Directory> All set ok, but i need to tell my ftp client initial directory for each user (otherwise it keep fail to retrieve directory), which i think it should be automatically set for each user (no need to type initial directory in ftp client)

  Read the article

• Windows 7 logon script net use fails

  - by Bryan

  Our network PCs currently consists of Windows XP Professional on a mixed 2008/2003 domain, with exception to one machine, which is a new Windows 7 PC we have bought for testing before we deploy the operating system. But we have discovered a problem with our logon script which automatically maps network drives for our users. The logon scripts are done via User GPOs, but the script itself is just a .cmd file using net use. The permissions are perfectly fine, as the same user can log on to a Windows XP machine and get their drives mapped without problem, but this one drive mapping constantly fails. This is repeatable using the net use command, and fails every time - it actually prompts the user for a username and password when executed interactively, yet if we enter \\server\share from a run dialog, the contents of the network share appear and are accessible without any further authentication. The Windows 7 PC (just like the XP systems) are domain members and the account being used is a domain account, which does have access to the share (as stated, it works fine on XP). I fail to understand what is happening here, as other shares on the server get mapped on the Windows 7 system. More info: The effective permissions of the share in question only grant the user 'list' permission on the root directory, the share permissions are 'everyone,full control'. I've created a new share with the same permissions just to test if it was down to the 'list' permissions on the root directory, but the Windows 7 machine maps this one fine.

  Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >