Search Results

Search found 9032 results on 362 pages for 'fast math'.

Page 324/362 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

  • No warning from gcc when function definition in linked source different from function prototype in h

    - by c_c
    Hi, I had a problem with a part of my code, which after some iterations seemed to read NaN as value of a int of a struct. I think I found the error, but am still wondering why gcc (version 3.2.3 on a embedded Linux with busybox) did not warn me. Here are the important parts of the code: A c file and its header for functions to acquire data over USB: // usb_control.h typedef struct{ double mean; short *values; } DATA_POINTS; typedef struct{ int size; DATA_POINTS *channel1; //....7 more channels } DATA_STRUCT; DATA_STRUCT *create_data_struct(int N); // N values per channel int free_data_struct(DATA_STRUCT *data); int aqcu_data(DATA_STRUCT *data, int N); A c and header file with helper function (math, bitshift,etc...): // helper.h int mean(DATA_STRUCT *data); // helper.c (this is where the error is obviously) double mean(DATA_STRUCT *data) { // sum in for loop data->channel1->mean = sum/data->N; // ...7 more channels // a printf here displayed the mean values corretly } The main file // main.c #include "helper.h" #include "usb_control.h" // Allocate space for data struct DATA_STRUCT *data = create_data_struct(N); // get data for different delays for (delay = 0; delay < 500; delay += pw){ acqu_data(data, N); mean(data); // printf of the mean values first is correct. Than after 5 iterations // it is always NaN for channel1. The other channels are displayed correctly; } There were no segfaults nor any other missbehavior, just the NaN for channel1 in the main file. After finding the error, which was not easy, it was of course east to fix. The return type of mean(){} was wrong in the definition. Instead of double mean() it has to be int mean() as the prototype defines. When all the functions are put into one file, gcc warns me that there is a redefinition of the function mean(). But as I compile each c file seperately and link them afterwards gcc seems to miss that. So my questions would be. Why didn't I get any warnings, even non with gcc -Wall? Or is there still another error hidden which is just not causing problems now? Regards, christian

    Read the article

  • ThreadQueue problems in "Accelerated C# 2008"

    - by Singlet
    Example for threading queue book "Accelerated C# 2008" (CrudeThreadPool class) not work correctly. If I insert long job in WorkFunction() on 2-processor machine executing for next task don't run before first is over. How to solve this problem? I want to load the processor to 100 percent public class CrudeThreadPool { static readonly int MAX_WORK_THREADS = 4; static readonly int WAIT_TIMEOUT = 2000; public delegate void WorkDelegate(); public CrudeThreadPool() { stop = 0; workLock = new Object(); workQueue = new Queue(); threads = new Thread[ MAX_WORK_THREADS ]; for( int i = 0; i < MAX_WORK_THREADS; ++i ) { threads[i] = new Thread( new ThreadStart(this.ThreadFunc) ); threads[i].Start(); } } private void ThreadFunc() { lock( workLock ) { int shouldStop = 0; do { shouldStop = Interlocked.Exchange( ref stop, stop ); if( shouldStop == 0 ) { WorkDelegate workItem = null; if( Monitor.Wait(workLock, WAIT_TIMEOUT) ) { // Process the item on the front of the queue lock( workQueue ) { workItem =(WorkDelegate) workQueue.Dequeue(); } workItem(); } } } while( shouldStop == 0 ); } } public void SubmitWorkItem( WorkDelegate item ) { lock( workLock ) { lock( workQueue ) { workQueue.Enqueue( item ); } Monitor.Pulse( workLock ); } } public void Shutdown() { Interlocked.Exchange( ref stop, 1 ); } private Queue workQueue; private Object workLock; private Thread[] threads; private int stop; } public class EntryPoint { static void WorkFunction() { Console.WriteLine( "WorkFunction() called on Thread {0}",Thread.CurrentThread.GetHashCode() ); //some long job double s = 0; for (int i = 0; i < 100000000; i++) s += Math.Sin(i); } static void Main() { CrudeThreadPool pool = new CrudeThreadPool(); for( int i = 0; i < 10; ++i ) { pool.SubmitWorkItem( new CrudeThreadPool.WorkDelegate( EntryPoint.WorkFunction) ); } pool.Shutdown(); } }

    Read the article

  • AJAX Div Retrieval every 60 seconds

    - by Sam
    Hello everyone! What I would like to do is retrieve the contents of a PHP file and insert it into a div every 60 seconds, basically refreshing the dynamic div. I've come up with the following code so far, however it doesn't seem to be working. The code is just like this, nothing extra, apart from the MYSQL login. PHP to grab: <?php $time = date("m/d/Y h:i:s a", time()); mysql_query("UPDATE djs SET requesttime='{$time}' WHERE username='{$djs['username']}'") or die(mysql_error()); $request_db = mysql_query("SELECT * FROM requests WHERE haveplayed='0'") or die(mysql_error()); echo "<table style=\"border:1px solid;width:99%;margin-left:auto;margin-right:auto;\" border=\"1\">"; echo "<tr><th>Title</th><th>Artist</th><th>Dedicated To...</th></tr>"; while($request = mysql_fetch_array( $request_db )) { echo "<tr><td style=\"width:33%;padding:1px;\">"; echo $request['SongName']; echo "</td><td style=\"width:33%;\">"; echo $request['Artist']; echo "</td><td style=\"width:33%;\">"; echo $request['DedicatedTo']; echo "</td></tr>"; } echo "</table>"; ?> The original PHP code is just the same, enclosed in a div with an id attribute of 'ajax_table'. The JavaScript is: // JavaScript Document var xmlHttp_moniter function moniter() { xmlHttp_moniter = GetXmlHttpObject_parcel() if(xmlHttp_moniter == null) { alert("browser does not support HTTP Request") return } var url="ajax_table.php?random=" + Math.random() xmlHttp_moniter.onreadystatechange = stateChanged xmlHttp_moniter.open("GET",url,true) xmlHttp_moniter.send(null) } function stateChanged() { if(xmlHttp_moniter.readyState==4 || xmlHttp_moniter.readyState == "complete") { document.getElementById("ajax_table").innerHTML = xmlHttp_moniter.responseText setTimeout('ajax_table()',60000); } } function GetXmlHttpObject_parcel() { var xmlHttp_moniter=null; try { xmlHttp_moniter=new XMLHttpRequest(); } catch (e) { //Internet Explorer try { xmlHttp_moniter=new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { xmlHttp_moniter=new ActiveXObject("Microsoft.XMLHTTP"); } } return xmlHttp_moniter; } and that is on the page that is requesting the other php page.

    Read the article

  • CUDA memory transfer issue

    - by Vaibhav Sundriyal
    I am trying to execute a code which first transfers data from CPU to GPU memory and vice-versa. In spite of increasing the volume of data, the data transfer time remains the same as if no data transfer is actually taking place. I am posting the code. #include <stdio.h> /* Core input/output operations */ #include <stdlib.h> /* Conversions, random numbers, memory allocation, etc. */ #include <math.h> /* Common mathematical functions */ #include <time.h> /* Converting between various date/time formats */ #include <cuda.h> /* CUDA related stuff */ #include <sys/time.h> __global__ void device_volume(float *x_d,float *y_d) { int index = blockIdx.x * blockDim.x + threadIdx.x; } int main(void) { float *x_h,*y_h,*x_d,*y_d,*z_h,*z_d; long long size=9999999; long long nbytes=size*sizeof(float); timeval t1,t2; double et; x_h=(float*)malloc(nbytes); y_h=(float*)malloc(nbytes); z_h=(float*)malloc(nbytes); cudaMalloc((void **)&x_d,size*sizeof(float)); cudaMalloc((void **)&y_d,size*sizeof(float)); cudaMalloc((void **)&z_d,size*sizeof(float)); gettimeofday(&t1,NULL); cudaMemcpy(x_d, x_h, nbytes, cudaMemcpyHostToDevice); cudaMemcpy(y_d, y_h, nbytes, cudaMemcpyHostToDevice); cudaMemcpy(z_d, z_h, nbytes, cudaMemcpyHostToDevice); gettimeofday(&t2,NULL); et = (t2.tv_sec - t1.tv_sec) * 1000.0; // sec to ms et += (t2.tv_usec - t1.tv_usec) / 1000.0; // us to ms printf("\n %ld\t\t%f\t\t",nbytes,et); et=0.0; //printf("%f %d\n",seconds,CLOCKS_PER_SEC); // launch a kernel with a single thread to greet from the device //device_volume<<<1,1>>>(x_d,y_d); gettimeofday(&t1,NULL); cudaMemcpy(x_h, x_d, nbytes, cudaMemcpyDeviceToHost); cudaMemcpy(y_h, y_d, nbytes, cudaMemcpyDeviceToHost); cudaMemcpy(z_h, z_d, nbytes, cudaMemcpyDeviceToHost); gettimeofday(&t2,NULL); et = (t2.tv_sec - t1.tv_sec) * 1000.0; // sec to ms et += (t2.tv_usec - t1.tv_usec) / 1000.0; // us to ms printf("%f\n",et); cudaFree(x_d); cudaFree(y_d); cudaFree(z_d); return 0; } Can anybody help me with this issue? Thanks

    Read the article

  • Can't add client machine to windows server 2008 domain controller

    - by Patrick J Collins
    A bit of background before I dive into the gritty details: I have a single server running Windows 2003 Server where I host my ASP.net website and SQL Server + Reports. I've been creating ordinary windows user accounts to authenticate my users, and I enabled integrated windows authentication with impersonation. I've set up a bunch of user groups which correspond to certain roles (admin, power user, normal user, etc) and I test membership to enable or disable certain features. Overall, I'm pretty happy with the solution, it was quick to setup and I don't have to worry about messing around storing passwords and whatnot. Well, what I'm trying to do now is set up a new environment with 3 servers (Web, SQL, Reports) and I'd like these three servers to share common user accounts. I understand that I could add these three machines to a domain, which means installing Active Directory on one of the machines. I am barking up the wrong tree here? Would you suggest an alternative configuration? Assuming that I stick with AD, I have a couple of questions regarding DNS. To be honest, I'd rather not fiddle around with the DNS settings because my ISP already has their own DNS server which works just fine. It would appear however that DNS and AD are intertwined. Firstly, if I am to create a new domain in called mycompany.net, do I actually need to be the registered owner of that domain name and ensure the DNS entry points to the IP address of the machine hosting AD? Secondly, for the two other machines that I am trying to add to the domain, do I need to fiddle with their DNS settings? I've tried setting the preferred DNS Server IP address to that of my newly installed AD, but no luck. At this point, I can't add the two other machines to the domain. Here are some diagnostics that I have run based on a few suggestions I read on forums (sorry they're in French, although I could translate if needed). I ran nltest, which seems to indicate that the client can discover the domain controller. When I run dcdiag, the call to DsGetDcName fails with error 1722, not really sure what that means. Any suggestions? Thanks! C:\Users\Administrator>nltest /dsgetdc:mycompany.net Contrôleur de domaine : \\REPORTS.mycompany.net Adresse : \\111.111.111.111 GUID dom : 3333a4ec-ca56-4f02-bb9e-76c29c6c3832 Nom dom : mycompany.net Nom de la forêt : mycompany.net Nom de site du contrôleur de domaine : Default-First-Site-Name Nom de notre site : Default-First-Site-Name Indicateurs : PDC GC DS LDAP KDC TIMESERV WRITABLE DNS_DC DNS_DOMAIN DNS _FOREST CLOSE_SITE FULL_SECRET La commande a été correctement exécutée C:\Users\Administrator>dcdiag /s:mycompany.net /u: mycompany.net \pcollins /p:somepass Diagnostic du serveur d'annuaire Exécution de l'installation initiale : * Forêt AD identifiée. Collecte des informations initiales terminée. Exécution des tests initiaux nécessaires Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Connectivity ......................... Le test Connectivity de REPORTS a réussi Exécution des tests principaux Test du serveur : Default-First-Site-Name\REPORTS Démarrage du test : Advertising Erreur irrécupérable : l'appel DsGetDcName (REPORTS) a échoué ; erreur 1722 Le localisateur n'a pas pu trouver le serveur. ......................... Le test Advertising de REPORTS a échoué Démarrage du test : FrsEvent Impossible d'interroger le journal des événements File Replication Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test FrsEvent de REPORTS a échoué Démarrage du test : DFSREvent Impossible d'interroger le journal des événements DFS Replication sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test DFSREvent de REPORTS a échoué Démarrage du test : SysVolCheck [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test SysVolCheck de REPORTS a échoué Démarrage du test : KccEvent Impossible d'interroger le journal des événements Directory Service sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test KccEvent de REPORTS a échoué Démarrage du test : KnowsOfRoleHolders ......................... Le test KnowsOfRoleHolders de REPORTS a réussi Démarrage du test : MachineAccount Impossible d'ouvrir le canal avec [REPORTS] : échec avec l'erreur 53 : Le chemin réseau n'a pas été trouvé. Impossible d'obtenir le nom de domaine NetBIOS Échec : impossible de tester le nom principal de service (SPN) HOST Échec : impossible de tester le nom principal de service (SPN) HOST ......................... Le test MachineAccount de REPORTS a réussi Démarrage du test : NCSecDesc ......................... Le test NCSecDesc de REPORTS a réussi Démarrage du test : NetLogons [REPORTS] Une opération net use ou LsaPolicy a échoué avec l'erreur 53, Le chemin réseau n'a pas été trouvé.. ......................... Le test NetLogons de REPORTS a échoué Démarrage du test : ObjectsReplicated ......................... Le test ObjectsReplicated de REPORTS a réussi Démarrage du test : Replications ......................... Le test Replications de REPORTS a réussi Démarrage du test : RidManager ......................... Le test RidManager de REPORTS a réussi Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.mycompany.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué Démarrage du test : SystemLog Impossible d'interroger le journal des événements System sur le serveur REPORTS.mycompany.net. Erreur 0x6ba « Le serveur RPC n'est pas disponible. » ......................... Le test SystemLog de REPORTS a échoué Démarrage du test : VerifyReferences ......................... Le test VerifyReferences de REPORTS a réussi Exécution de tests de partitions sur ForestDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de ForestDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de ForestDnsZones a réussi Exécution de tests de partitions sur DomainDnsZones Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de DomainDnsZones a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de DomainDnsZones a réussi Exécution de tests de partitions sur Schema Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Schema a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Schema a réussi Exécution de tests de partitions sur Configuration Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de Configuration a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de Configuration a réussi Exécution de tests de partitions sur mycompany Démarrage du test : CheckSDRefDom ......................... Le test CheckSDRefDom de mycompany a réussi Démarrage du test : CrossRefValidation ......................... Le test CrossRefValidation de mycompany a réussi Exécution de tests d'entreprise sur mycompany.net Démarrage du test : LocatorCheck Avertissement : l'appel DcGetDcName(GC_SERVER_REQUIRED) a échoué ; erreur 1722 Serveur de catalogue global introuvable - Les catalogues globaux ne fonctionnent pas. Avertissement : l'appel DcGetDcName(PDC_REQUIRED) a échoué ; erreur 1722 Contrôleur principal de domaine introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(TIME_SERVER) a échoué ; erreur 1722 Serveur de temps introuvable. Le serveur contenant le rôle PDC ne fonctionne pas. Avertissement : l'appel DcGetDcName(GOOD_TIME_SERVER_PREFERRED) a échoué ; erreur 1722 Serveur de temps introuvable. Avertissement : l'appel DcGetDcName(KDC_REQUIRED) a échoué ; erreur 1722 Centre de distribution de clés introuvable : les centres de distribution de clés ne fonctionnent pas. ......................... Le test LocatorCheck de mycompany.net a échoué Démarrage du test : Intersite ......................... Le test Intersite de mycompany.net a réussi Update 1 : I am under the distinct impression that the problem is caused by some security settings. I have read elsewhere that the client needs to be able to access the fileshare sysvol. I had to enable Client for Microsoft Windows and File and Printer Sharing which were previously disabled. When I now run dcdiag the Advertising test works, which I suppose is forward progress. It currently chokes on the Services step (unable to open remote IPC). Démarrage du test : Services Impossible d'ouvrir IPC distant à [REPORTS.locbus.net] : erreur 0x35 « Le chemin réseau n'a pas été trouvé. » ......................... Le test Services de REPORTS a échoué The original English version of that error message : Could not open Remote ipc to [server] Update 2 : I attach some more diagnostics : Netsetup.log (client): 09/24/2009 13:27:09:773 ----------------------------------------------------------------- 09/24/2009 13:27:09:773 NetpValidateName: checking to see if 'WEB' is valid as type 1 name 09/24/2009 13:27:12:773 NetpCheckNetBiosNameNotInUse for 'WEB' [MACHINE] returned 0x0 09/24/2009 13:27:12:773 NetpValidateName: name 'WEB' is valid for type 1 09/24/2009 13:27:12:805 ----------------------------------------------------------------- 09/24/2009 13:27:12:805 NetpValidateName: checking to see if 'WEB' is valid as type 5 name 09/24/2009 13:27:12:805 NetpValidateName: name 'WEB' is valid for type 5 09/24/2009 13:27:12:852 ----------------------------------------------------------------- 09/24/2009 13:27:12:852 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:12:992 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:12:992 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:320 ----------------------------------------------------------------- 09/24/2009 13:27:21:320 NetpDoDomainJoin 09/24/2009 13:27:21:320 NetpMachineValidToJoin: 'WEB' 09/24/2009 13:27:21:320 OS Version: 6.0 09/24/2009 13:27:21:320 Build number: 6002 09/24/2009 13:27:21:320 ServicePack: Service Pack 2 09/24/2009 13:27:21:414 SKU: Windows Server® 2008 Standard 09/24/2009 13:27:21:414 NetpDomainJoinLicensingCheck: ulLicenseValue=1, Status: 0x0 09/24/2009 13:27:21:414 NetpGetLsaPrimaryDomain: status: 0x0 09/24/2009 13:27:21:414 NetpMachineValidToJoin: status: 0x0 09/24/2009 13:27:21:414 NetpJoinDomain 09/24/2009 13:27:21:414 Machine: WEB 09/24/2009 13:27:21:414 Domain: MYCOMPANY.NET 09/24/2009 13:27:21:414 MachineAccountOU: (NULL) 09/24/2009 13:27:21:414 Account: MYCOMPANY.NET\pcollins 09/24/2009 13:27:21:414 Options: 0x25 09/24/2009 13:27:21:414 NetpLoadParameters: loading registry parameters... 09/24/2009 13:27:21:414 NetpLoadParameters: DNSNameResolutionRequired not found, defaulting to '1' 0x2 09/24/2009 13:27:21:414 NetpLoadParameters: status: 0x2 09/24/2009 13:27:21:414 NetpValidateName: checking to see if 'MYCOMPANY.NET' is valid as type 3 name 09/24/2009 13:27:21:523 NetpCheckDomainNameIsValid [ Exists ] for 'MYCOMPANY.NET' returned 0x0 09/24/2009 13:27:21:523 NetpValidateName: name 'MYCOMPANY.NET' is valid for type 3 09/24/2009 13:27:21:523 NetpDsGetDcName: trying to find DC in domain 'MYCOMPANY.NET', flags: 0x40001010 09/24/2009 13:27:22:039 NetpDsGetDcName: failed to find a DC having account 'WEB$': 0x525, last error is 0x79 09/24/2009 13:27:22:039 NetpDsGetDcName: status of verifying DNS A record name resolution for 'KING.MYCOMPANY.NET': 0x0 09/24/2009 13:27:22:039 NetpDsGetDcName: found DC '\\KING.MYCOMPANY.NET' in the specified domain 09/24/2009 13:27:30:039 NetUseAdd to \\KING.MYCOMPANY.NET\IPC$ returned 53 09/24/2009 13:27:30:039 NetpJoinDomain: status of connecting to dc '\\KING.MYCOMPANY.NET': 0x35 09/24/2009 13:27:30:039 NetpDoDomainJoin: status: 0x35 09/24/2009 13:27:30:148 ----------------------------------------------------------------- ipconfig /all (on client): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : WEB Suffixe DNS principal . . . . . . : Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-17-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.122(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : **.***.163.123 NetBIOS sur Tcpip. . . . . . . . . . . : Activé ipconfig /all (on server): Configuration IP de Windows Nom de l'hôte . . . . . . . . . . : KING Suffixe DNS principal . . . . . . : mycompany.net Type de noeud. . . . . . . . . . : Hybride Routage IP activé . . . . . . . . : Non Proxy WINS activé . . . . . . . . : Non Liste de recherche du suffixe DNS.: locbus.net Carte Ethernet Connexion au réseau local : Suffixe DNS propre à la connexion. . . : Description. . . . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated) Adresse physique . . . . . . . . . . . : **-15-5D-A1-1E-** DHCP activé. . . . . . . . . . . . . . : Non Configuration automatique activée. . . : Oui Adresse IPv4. . . . . . . . . . . : **.***.163.123(préféré) Masque de sous-réseau. . . . . . . . . : 255.255.255.0 Passerelle par défaut. . . . . . . . . : **.***.163.2 Serveurs DNS. . . . . . . . . . . . . : 127.0.0.1 NetBIOS sur Tcpip. . . . . . . . . . . : Activé nslookup (on client): Serveur : *******.***.com Address: **.***.163.123 Nom : mycompany.net Addresses: ****:****:a37b::****:a37b **.****.163.123

    Read the article

  • Update php 5.2.0 to 5.2.4 with aptitude

    - by Kiva
    Hi guy, I would like to update my php 5 in my server. At this moment, I use php 5.2.0 so I want to update it to php 5.2.4 (not php 5.3). I tried to do this: aptitude update aptitude upgrade 63 packets were updated but not php which is always in 5.0 How can I update my php please ? Here is the output of commands asked by David in another post: aptitude search php5 p libapache-mod-php5 - server-side, HTML-embedded scripting langu i A libapache2-mod-php5 - server-side, HTML-embedded scripting langu i php5 - server-side, HTML-embedded scripting langu p php5-apache2-mod-bt - PHP bindings for mod_bt p php5-auth-pam - A PHP5 extension for PAM authentication i php5-cgi - server-side, HTML-embedded scripting langu p php5-clamavlib - PHP ClamAV Lib - ClamAV Interface for PHP5 p php5-cli - command-line interpreter for the php5 scri i A php5-common - Common files for packages built from the p i php5-curl - CURL module for php5 p php5-dev - Files for PHP5 module development i A php5-gd - GD module for php5 p php5-idn - PHP api for the IDNA library p php5-imagick - ImageMagick module for php5 p php5-imap - IMAP module for php5 p php5-interbase - interbase/firebird module for php5 p php5-json - JSON serialiser for PHP5 p php5-ldap - LDAP module for php5 p php5-mapscript - module for php5-cgi to use mapserver p php5-maxdb - PHP extension to access MaxDB databases fo i A php5-mcrypt - MCrypt module for php5 p php5-memcache - memcache extension module for PHP5 p php5-mhash - MHASH module for php5 p php5-ming - Ming module for php5 i A php5-mysql - MySQL module for php5 p php5-odbc - ODBC module for php5 p php5-pgsql - PostgreSQL module for php5 p php5-ps - ps module for PHP 5 p php5-pspell - pspell module for php5 p php5-radius - PECL radius module for PHP 5 p php5-recode - recode module for php5 p php5-snmp - SNMP module for php5 p php5-sqlite - SQLite module for php5 p php5-sqlite3 - SQLite3 module for php5 p php5-sqlrelay - SQL Relay PHP API p php5-suhosin - advanced protection module for php5 p php5-sybase - Sybase / MS SQL Server module for php5 p php5-tidy - tidy module for php5 p php5-uuid - OSSP uuid module for php5 p php5-xapian - Xapian search engine interface for PHP5 p php5-xcache - Fast, stable PHP opcode cacher p php5-xmlrpc - XML-RPC module for php5 p php5-xsl - XSL module for php5 aptitude show php5 | grep Version Version : 5.2.0-8+etch13 aptitude show php5-cgi | grep Version Version : 5.2.0-8+etch13 php5 --version -bash: php5: command not found php-cgi --version PHP 5.2.0-8+etch13 (cgi-fcgi) (built: Oct 2 2008 08:21:17) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies

    Read the article

  • VMware Player loses internet connectivity

    - by Martha
    Periodically, the internet simply stops working in my virtual machine, and the only way I can get it working again is to restart the host computer. Since I use the virtual machine specifically for testing web pages, this is, shall we say, a bother. Details: I have Windows XP Pro running in VMware Player (v. 3.0.0 build-203739) on a Windows 7 host. It's set to NAT (shared IP address) because the firewall won't allow a bridged connection. Every couple of days or so, first the internet slows down to a crawl, then eventually it stops working altogether. Both VMWare and the virtual OS report that they are connected, everything looks just peachy, I can reach the internet from the host, but on the VM, all web pages time out and/or report that the server could not be found. (Browser-independent; tried with IE, FF, Chrome, Safari, and Opera.) When this happens, the only way I've found to restore the internet connectivity is to restart the host machine. Restarting the VM doesn't help, nor does refreshing network connections on either the host or the guest. (Although I'm not entirely sure I've found the proper way to refresh a network connection in Windows 7...) I have not noticed any predictability about when the problem occurs, i.e. it's not immediately after I do anything special. It seems to occur mostly after putting the host to sleep once or twice, but it has happened even if the host has been in continuous use. It also seems independent of when I start using the VM - sometimes, I wake up the VM and the internet is really slow in it, then eventually stops working altogether; other times, I wake up the VM, use it perfectly happily for a while, then suddenly the internet is gone. Does anyone know why this is occurring? Failing that, is there a workaround that's less drastic than restarting the host? (Windows 7 startup times are blazingly fast compared to previous versions of Windows, but it's still a hassle to close all my programs and reopen them again.) Edit: while badges overall are nice, the Tumbleweed badge isn't helping me to solve my problem. Hasn't anyone encountered anything even remotely similar?

    Read the article

  • What is the difference between Anycast and GeoDNS / GeoIP wrt HA?

    - by Riyad
    Based on the Wikipedia description of Anycast, it includes both the distribution of a domain-name-to-many-IP-mapping across many DNS servers as well as replying to clients with the most geographically close (or fastest) server. In the context of a globally distributed, highly available site like google.com (or any CDN service with many global edge locations) this sounds like the two key features one would need. DNS services like Amazon's Route53, EasyDNS and DNSMadeEasy all advertise themselves as Anycast-enabled networks. Therefore my assumption is that each of these DNS services transparently offer me those two killer features: multi-IP-to-domain mapping AND routing clients to the closest node. However, each of these services seem to separate out these two functionalities, referring to the 2nd one (routing clients to closest node) as "GeoDNS", "GeoIP" or "Global Traffic Director" and charge extra for the service. If a core tenant of an Anycast-capable system is to already do this, why is this functionality being earmarked as this extra feature? What is this "GeoDNS" feature doing that a standard Anycast DNS service won't do (according to the definition of Anycast from Wikipedia -- I understand what is being advertised, just not why it isn't implied already). I get extra-confused when a DNS service like Route53 that doesn't support this nebulous "GeoDNS" feature lists functionality like: Fast – Using a global anycast network of DNS servers around the world, Route 53 is designed to automatically route your users to the optimal location depending on network conditions. As a result, the service offers low query latency for your end users, as well as low update latency for your DNS record management needs. ... which sounds exactly like what GeoDNS is intended to do, but geographically directing clients is something they explicitly don't support it yet. Ultimately I am looking for the two following features from a DNS provider: Map multiple IP addresses to a single domain name (like google.com, amazon.com, etc. does) Utilize a DNS service that will respond to client requests for that domain with the IP address of the nearest server to the requestee. As mentioned, it seems like this is all part of an "Anycast" DNS service (all of which these services are), but the features and marketing I see from them suggest otherwise, making me think I need to learn a bit more about how DNS works before making a deployment choice. Thanks in advance for any clarifications.

    Read the article

  • PHP-FPM High Memory Usage

    - by Ruel
    I have a wordpress blog, that uses WP-SuperCache, and normally I get 100 visitors per day. With nginx + php-fpm it's blazing fast, and I have no regrets. One thing i noticed, php-fpm takes a lot of memory: top - 09:20:43 up 5 days, 15:53, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 26 total, 1 running, 25 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 329956k used, 718620k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10226 www-data 15 0 145m 52m 4584 S 0.0 5.1 0:07.55 php-fpm 10223 www-data 16 0 141m 48m 4692 S 0.0 4.8 0:08.70 php-fpm 20277 www-data 15 0 138m 46m 4368 S 0.0 4.5 0:07.55 php-fpm 20259 www-data 15 0 133m 41m 4600 S 0.0 4.0 0:06.68 php-fpm 12201 www-data 15 0 133m 41m 4632 S 0.0 4.0 0:08.31 php-fpm 11586 www-data 15 0 132m 40m 4292 S 0.0 3.9 0:03.27 php-fpm 29822 www-data 15 0 128m 36m 4356 S 0.0 3.6 0:05.26 php-fpm 28427 mysql 15 0 200m 7300 4764 S 0.0 0.7 0:47.89 mysqld 10202 root 18 0 98.3m 4320 1204 S 0.0 0.4 0:03.80 php-fpm 22524 root 18 0 86064 3396 2652 S 0.0 0.3 0:16.74 sshd 9882 www-data 18 0 42052 2572 804 S 0.0 0.2 0:27.52 nginx 9884 www-data 18 0 42052 2560 804 S 0.0 0.2 0:26.26 nginx 9881 www-data 18 0 42064 2524 804 S 0.0 0.2 0:29.24 nginx 9879 www-data 18 0 42032 2480 804 S 0.0 0.2 0:29.58 nginx 23771 root 15 0 12176 1820 1316 S 0.0 0.2 0:00.08 bash 28344 root 22 0 11932 1416 1184 S 0.0 0.1 0:00.00 mysqld_safe 18167 root 16 0 62628 1208 648 S 0.0 0.1 0:00.55 sshd 25941 root 15 0 12612 1192 928 R 0.0 0.1 0:02.21 top 11573 root 15 0 20876 1168 592 S 0.0 0.1 0:00.67 crond 9878 root 18 0 41000 1112 284 S 0.0 0.1 0:00.00 nginx 21736 root 23 0 21648 936 716 S 0.0 0.1 0:00.00 xinetd 11585 root 18 0 46748 816 428 S 0.0 0.1 0:00.00 saslauthd 14125 root 12 -4 12768 768 452 S 0.0 0.1 0:00.00 udevd 1 root 18 0 10352 728 616 S 0.0 0.1 0:17.93 init 24564 root 15 0 5912 680 544 S 0.0 0.1 0:01.90 syslogd 11618 root 18 0 46748 548 160 S 0.0 0.1 0:00.00 saslauthd Here's my php-fpm config: [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.start_servers = 3 pm.min_spare_servers = 3 pm.max_spare_servers = 10 pm.max_requests = 500 Sometimes it goes up to 400MB. And I'm planning to add a new website on my VPS. Is this normal?

    Read the article

  • New Computer Build Questions

    - by MJ
    I'm in the process of gathering parts and specs for a new machine. I wear many hats, so the machine needs to do a lot. I need at least 2 monitor support, if not three. I also play many online MMOs (wow, aion, war hammer, etc), along with some freelance programming projects. I already have a case which is very large, so it will fit anything. I have 2 other SATA HDs. They are more for storage and basic programs. I feel that the best improvement could be done with a solid state HD, true or not? I'm more of a software/programming guy, so ANY input at all on improving this system build would be appreciated. I have a few questions with this list. AMD or Intel? I don't know enough about either to choose what would best fit me. Thanks! **EDIT: Thanks for the input everyone! Here are some answers: I do a lot of programming and gaming, so I do need things for both. The newer video card covers the gaming aspect, as well as allowing me to have many monitors. (hopefully upgrade to dual 30' or more) I don't need any additional HDs at this time. I have a SATA 160g and 120g from my previous computer, and a NAS system with over 2TB of storage on the homenetwork. I just wanted a fast HD for OS/programs/games. With the memory. I have used G.SKILL before in 2 system builds. It's done excellent for me in them. Very stable. **EDIT2: Made some additional changes. Lowered the power supply down to 750, which saves me more $$. Also changed the SSD to 2 WD 650G HDs. Thinking of doing a CPU upgrade to the 3.4GHZ AMD Phenom II X4 965 Black Edition Deneb 3.4GHz System Specs - Budget:$1500 CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz MB: GIGABYTE GA-MA790GPT-UD3H AM3 AMD 790GX HDMI ATX Memory: G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 1066 Video: DIAMOND 5870PE51G Radeon HD 5870 (Cypress XT) 1GB 256-bit GD Power Supply: XCLIO GREATPOWER 1000W ATX12V SLI Ready CrossFire Ready HD:Intel X25-M Mainstream SSDSA2MH080G2C1 2.5" 80GB SATA II MLC Changes: Power Supply: CORSAIR CMPSU-750TX 750W ATX12V / EPS12V HD: 2x Western Digital Caviar Blue WD6400AAKS 640GB CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz

    Read the article

  • VPN IP Routing - slow connections

    - by dannymcc
    UPDATE: Router error logs show: LCP Time-out 0 I'm not sure how to correct this. The Lan-to-Lan profiles are set to -1 Idle Timeout (for the remote branch). I have a PPTP VPN running between two Draytek 2820 routers. They are setup that one dials out to the other one. Main Practice - 192.168.1.0/24 Branch - 192.168.3.0/24 I have then set (on the Branch) router the following route: 192.168.1.0/24 If I then request a server running on 192.168.1.1 from the Branch, it correctly routes through VPN tunnel. If I request the branch server at 192.168.3.1 it correctly routes to the local server without using the VPN tunnel. I have temporarily disabled the firewall on both routers, and made sure that QoS is disabled. The Main Practice internet connection is ~30mb down / ~10mb up, and the Branch connection is ~5mb down / ~2mb up. Anything over the VPN tunnel runs pretty slowly (VNC, Remote Desktop and Terminal Emulators). However, if I dial using the Windows VPN wizard, creating a connection from the laptop to the Main Practice - everything runs quickly. I'm looking for possible causes, and/or ways of further diagnosing the issue. Any help would be greatly appreciated! UPDATE: In summary, when I connect within the Branch and try and access a host that's within the Main Practice it works, but slowly. If I then dial the VPN on my Windows 7 laptop whilst still connected to the Branch network, it's fast. Main Practice Branch Practice Routing Table from Branch Router Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 126.256.126.103 WAN2 C~ 192.168.1.99/ 255.255.255.255 directly connected VPN-1 S~ 192.168.1.0/ 255.255.255.0 via 192.168.1.99 VPN-1 S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.99 VPN-1 C~ 192.168.3.0/ 255.255.255.0 directly connected LAN2 C 126.256.126.103/ 255.255.255.224 directly connected WAN2 Routing Table from Main Practice Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 81.139.64.1, WAN2 S 81.137.176.1/ 255.255.255.255 via 81.137.176.1, WAN2 * 81.139.64.1/ 255.255.255.255 via 81.139.64.1, WAN2 C~ 192.168.1.204/ 255.255.255.255 is directly connected, VPN C~ 192.168.1.0/ 255.255.255.0 is directly connected, LAN S~ 192.168.2.0/ 255.255.255.0 via 192.168.1.204, VPN S~ 192.168.3.0/ 255.255.255.0 via 192.168.1.203, VPN Connection Details (from Branch Router) Connection Details (from Main Practice Router) IPERF.exe Output

    Read the article

  • Bidirectional real-time sync of large file tree between two distant linux servers

    - by dlo
    By large file tree I mean about 200k files, and growing all the time. A relatively small number of files are being changed in any given hour though. By bidirectional I mean that changes may occur on either server and need to be pushed to the other, so rsync doesn't seem appropriate. By distant I mean that the servers are both in data centers, but geographically remote from each other. Currently there are only 2 servers, but that may expand over time. By real-time, it's ok for there to be a little latency between syncing, but running a cron every 1-2 minutes doesn't seem right, since a very small fraction of files may change in any given hour, let alone minute. EDIT: This is running on VPS's so I might be limited on the kinds of kernel-level stuff I can do. Also, the VPS's are not resource-rich, so I'd shy away from solutions that require lots of ram (like Gluster?). What's the best / most "accepted" approach to get this done? This seems like it would be a common need, but I haven't been able to find a generally accepted approach yet, which was surprising. (I'm seeking the safety of the masses. :) I've come across lsyncd to trigger a sync at the filesystem change level. That seems clever though not super common, and I'm a bit confused by the various lsyncd approaches. There's just using lsyncd with rsync, but it seems this could be fragile for bidirectionality since rsync doesn't have a notion of memory (eg- to know whether a deleted file on A should be deleted on B or whether it's a new file on B that should be copied to A). lipsync appears to be just a lsyncd+rsync implementation, right? Then there's using lsyncd with csync2, like this: http://www.axivo.com/community/threads/lightning-fast-synchronization-with-csync2-and-lsyncd.121/ ... I'm leaning towards this approach, but csync2 is a little quirky, though I did do a successful test of it. I'm mostly concerned that I haven't been able to find a lot of community confirmation of this method. People on here seem to like Unison a lot, but it seems that it is no longer under active development and it's not clear that it has an automatic trigger like lsyncd. I've seen Gluster mentioned, but maybe overkill for what I need? UPDATE: fyi- I ended up going with the original solution I mentioned: lsyncd+csync2. It seems to work quite well, and I like the architectural approach of having the servers be very loosely joined, so that each server can operate indefinitely on its own regardless of the link quality between them.

    Read the article

  • tproxy squid bridge very slow when cache is full

    - by Roberto
    I have installed a bridge tproxy proxy in a fast server with 8GB ram. The traffic is around 60Mb/s. When I start for first time the proxy (with the cache empty) the proxy works very well but when the cache becomes full (few hours later) the bridge goes very slow, the traffic goes below 10Mb/s and the proxy server becomes unusable. Any hints of what may be happening? I'm using: linux-2.6.30.10 iptables-1.4.3.2 squid-3.1.1 compiled with these options: ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --localstatedir=/var/lib --sysconfdir=/etc/squid --libexecdir=/usr/libexec/squid --localstatedir=/var --datadir=/usr/share/squid --enable-removal-policies=lru,heap --enable-icmp --disable-ident-lookups --enable-cache-digests --enable-delay-pools --enable-arp-acl --with-pthreads --with-large-files --enable-htcp --enable-carp --enable-follow-x-forwarded-for --enable-snmp --enable-ssl --enable-async-io=32 --enable-linux-netfilter --enable-epoll --disable-poll --with-maxfd=16384 --enable-err-languages=Spanish --enable-default-err-language=Spanish My squid.conf: cache_mem 100 MB memory_pools off acl manager proto cache_object acl localhost src 127.0.0.1/32 acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 acl to_localhost dst ::1/128 acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl net-g1 src xxx.xxx.xxx.xxx/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow net-g1 from where browsing should be allowed http_access allow localnet http_access allow localhost http_access deny all http_port 3128 http_port 3129 tproxy hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid 8000 16 256 access_log none cache_log /var/log/squid/cache.log coredump_dir /var/spool/squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . I have this issue when the cache is full, but do not really know if it is because of that. Thanks in advance and sorry my english. roberto

    Read the article

  • Need to increase nginx throughput to an upstream unix socket -- linux kernel tuning?

    - by Ben Lee
    I am running an nginx server that acts as a proxy to an upstream unix socket, like this: upstream app_server { server unix:/tmp/app.sock fail_timeout=0; } server { listen ###.###.###.###; server_name whatever.server; root /web/root; try_files $uri @app; location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://app_server; } } Some app server processes, in turn, pull requests off /tmp/app.sock as they become available. The particular app server in use here is Unicorn, but I don't think that's relevant to this question. The issue is, it just seems that past a certain amount of load, nginx can't get requests through the socket at a fast enough rate. It doesn't matter how many app server processes I set up, it doesn't even matter what the app is (tried it with a dummy app with just a single endpoint that returned an empty page with status 404). The bottleneck seems to be the socket, not the app. I'm getting a flood of these messages in the nginx error log: connect() to unix:/tmp/app.sock failed (11: Resource temporarily unavailable) while connecting to upstream Many requests result in status code 502, and those that don't take a long time to complete. The nginx write queue stat hovers around 1000. Anyway, I feel like I'm missing something obvious here, because this particular configuration of nginx and app server is pretty common, especially with Unicorn (it's the recommended method in fact). Are there any linux kernel options that needs to be set, or something in nginx? Any ideas about how to increase the throughput to the upstream socket? Something that I'm clearly doing wrong? Additional information on the environment: $ uname -a Linux app1 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ ruby -v ruby 1.9.3p194 (2012-04-20 revision 35410) [x86_64-linux] $ unicorn -v unicorn v4.3.1 $ nginx -V nginx version: nginx/1.2.1 built by gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) TLS SNI support enabled Current kernel tweaks: net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.ipv4.tcp_mem = 16777216 16777216 16777216 net.ipv4.tcp_window_scaling = 1 net.ipv4.route.flush = 1 net.ipv4.tcp_no_metrics_save = 1 net.ipv4.tcp_moderate_rcvbuf = 1 net.core.somaxconn = 8192 net.netfilter.nf_conntrack_max = 131072

    Read the article

  • Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

    - by Ben Campbell
    Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

    Read the article

  • OpenBSD pf 'match in all scrub (no-df)' causes HTTPS to be unreachable on mobile network

    - by Frank ter V.
    First of all: excuse me for my poor usage of the English language. For several years I'm experiencing problems with the 'match in all scrub (no-df)' rule in pf. I can't find out what's happening here. I'll try to be clear and simple. The pf.conf has been extremely shortened for this forum posting. Here is my pf.conf: set skip on lo0 match in all scrub (no-df) block all block in quick from urpf-failed pass in on em0 proto tcp from any to 213.125.xxx.xxx port 80 synproxy state pass in on em0 proto tcp from any to 213.125.xxx.xxx port 443 synproxy state pass out on em0 from 213.125.xxx.xxx to any modulate state HTTP and HTTPS are working fine. Until the moment a customer in France (Wanadoo DSL) couldn't view HTTPS pages! I blamed his provider and did no investigation on that problem. But then... I bought an Android Samsung Galaxy SII (Vodafone) to monitor my servers. Hours after I walked out of the telephone store: no HTTPS-connections on my server! I thought my servers were down, drove back to the office very fast. But they were up. I discovered that disabling the rule match in all scrub (no-df) solves the problem. Android phone (Vodafone NL) and Wanadoo DSL FR are now OK on HTTPS. But now I don't have any scrubbing anymore. This is not what I want. Does anyone here understand what is going on? I don't. Enabling scrubbing causes HTTPS webpages not to be loaded on SOME ISP's, but not all. In systat, I strangely DO see a state created and packets received from those ISP's... Still confused. I'm using OpenBSD 5.1/amd64 and OpenBSD 5.0/i386. I have two ISP's at my office (one DSL and one cable). Affects both. This can be reproduced quite easily. I hope someone has experience with this problem. Greetings, Frank

    Read the article

  • What do you use to store all of your personal data?

    - by codeflunky
    I have been on a quest for years to find the perfect tool to store all "my stuff". You know... personal information, code snippets, software keys, people's birthdays, whatever. There are lots of tools out there for this sort of thing, but I've never found any of them quite what I need. Ideally, I would just be able to type some notes, tag them (I don't like the idea of folder organization... too cumbersome) and then easily search and retrieve what I need later. It seems so simple, but for some reason I just can't find it. I currently use Backpack (sometimes), which is OK, but I hate the fact that you always have to create "pages" to store things. I don't want to have to do that. I want to just type some notes, tag it and save. That's it. And Backpack didn't even have search for a long time. What I do like about Backpack is that it's fast and it's web based. I've tried some desktop apps, which probably came closer to the functionality I want, but I just hate being tied to a single machine. I want to be able to get to my stuff anywhere, so the web based thing is a definite requirement. Anyway, I'm thinking about writing my own thing for this if I can't find anything, but before I make the attempt, I was wondering if anyone has any suggestions? I've used Backpack, Zoho Planner, Stikkit and Google Notes so far, and they are not quite to my liking. Anyone? (Sorry if this is off-topic, but I figured you guys might be legitimately into this kind of thing... you know, storing code snippets and such.) UPDATE: I've been using Evernote for a few days, and it is exactly what I've been looking for. It is totally tag based and allows both online and offline usage. The desktop app sits in your system tray and allows you to add whatever you want on the fly either as text notes or clippings from the browser. It also syncs it to the web (if you want) where you can get to it from anywhere using their web client. They even have a mobile client which I haven't used, but I will try it soon. Thanks again 18hrs. I wish I could give you 10 upvotes.

    Read the article

  • Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

    - by linni
    I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

    Read the article

  • How to grow to be global sysadmin of an organization?

    - by user64729
    Bit of a non-technical question but I have seen questions of the career development type on here before so hopefully it is fine. I work for a fast growing but still small organization (~65 employees). I have been their external sysadmin for a while now, looking after hosted Linux servers and infrastructure. In the past 12 months I have been transforming into the internal sysadmin for our office too. I'm currently studying Cisco CCNA to cover the demands of being an internal sysadmin and looking after the office LAN, routers, switches and VPNs. Now they want me to look after the global sysadmin function of the organization as a whole. The organization has 3 offices in total, 2 in the UK and 1 in the US. I work in one of the UK offices. The other offices are primarily Windows desktops with AD domain shops. My office is primarily a Linux shop with a file-server and NFS/NIS (no AD domain for the Windows desktops yet but it's in the works). Each other office has a sysadmin which in theory I am supposed to supervise but in reality each is independent. I have a very competent junior sysadmin working with me who shares the day-to-day tasks and does some of the longer term projects with my supervision. My boss has asked me how to grow from being the external sysadmin to the global sysadmin. I am to ponder this and then report back to him on how to achieve this. My current thoughts are: Management training or professional development - eg. reading books such as "Influencer" and "7 Habits". Also I feel I should take steps to improving communication skills since a senior person is expected to talk and speak out more often. Learn more about Windows and Active Directory - I'm an LPI-certified guy and have a lot of experience in Linux (Ubuntu or desktop, Debian/Ubuntu as server). Since the other offices are mainly Windows-domains it makes sense to skill-up in that area so I can understand what the other admins are talking about. Talk to previous colleagues who have are are in this role already - to try and get the benefit of their experience. Produce an "IT Roadmap" or similar that maps out where we want the organization to be and when, plotted out over the next couple of years with regards to internal and external infrastructure. I have produced a "Security roadmap" already which does cover some of these things. I guess this can summed up as "thinking more strategically"? I'd appreciate comments from anyone who has been through a similar situation, thanks.

    Read the article

  • Looking for a fiber optic "switch" or "router" for home use

    - by Shrout1
    The gist of my question: What is a "fiber optic" switch called? I.E. a layer 2 ethernet switch that uses fiber TX and RX connections and sends layer 2 network traffic between the fiber strands that are connected. Can someone purchase a dedicated fiber switch that does not have copper ethernet ports? What is the current average price of a device like this? Not necessarily looking for product endorsements, just information Might not make sense to go this route if it is too cost prohibitive What type of fiber connector is used for terminating a fiber strand into a jack on the wall? Can fiber be "patched" using two jacks and a "patch" cable? Is signal loss a concern with the longest runs at 100-200ft, a patch cable and media converters? The full story: My parents had unterminated fiber optic cable and terminated Cat5e run throughout their home when it was built in 2004. 10 years later the Cat5e isn't providing the throughput that my father needs to accomplish multiple streams of HD and fast system backups throughout the house. He can't reach gigabit speeds across the distance of the Cat5e runs. We are both interested in terminating the fiber connections and using them as high speed "backbones" to copper switches in each room of the house. It would be easy to attain gigabit speeds (or better, eventually) using the fiber. I have searched and searched for a "fiber optic switch" or "fiber optic router" and cannot find the correct term to describe this piece of hardware. We can use fiber media converters at the end points of each connection, however it would be nice to have a "patch panel" set up in the network closet in the basement that has fiber connections on it and switches the ethernet streams between the connections/systems in the house. Each fiber media converter costs between $50-$100 a piece... After 10 or so terminated connections it might make sense to find a piece of hardware that does not require media converters. That would depend upon the cost of this hardware Somewhat unrelated, if we are able to route between these fiber strands successfully, what is the physical connector type used in a jack on the wall? Just like RJ45 has a wall outlet (depicted below): What is the fiber optic equivalent of this? In the interim could we "patch" a couple fiber strands together in the network closet? Would signal loss be of concern with a run length of 100-200 feet, a patch cable and two media converters? If that would work then it could be used until the funds are available for more.

    Read the article

  • Python Django sites on Apache+mod_wsgi with nginx proxy: highly fluctuating performance

    - by Halfgaar
    I have an Ubuntu 10.04 box running several dozen Python Django sites using mod_wsgi (embedded mode; the faster mode, if properly configured). Performance highly fluctuates. Sometimes fast, sometimes several seconds delay. The smokeping graphs are al over the place. Recently, I also added an nginx proxy for the static content, in the hopes it would cure the highly fluctuating performance. But, even though it reduced the number of requests Apache has to process significantly, it didn't help with the main problem. When clicking around on websites while running htop, it can be seen that sometimes requests are almost instant, whereas sometimes it causes Apache to consume 100% CPU for a few seconds. I really don't understand where this fluctuation comes from. I have configured the mpm_worker for Apache like this: StartServers 1 MinSpareThreads 50 MaxSpareThreads 50 ThreadLimit 64 ThreadsPerChild 50 MaxClients 50 ServerLimit 1 MaxRequestsPerChild 0 MaxMemFree 2048 1 server with 50 threads, max 50 clients. Munin and apache2ctl -t both show a consistent presence of workers; they are not destroyed and created all the time. Yet, it behaves as such. This tells me that once a sub interpreter is created, it should remain in memory, yet it seems sites have to reload all the time. I also have a nginx+gunicorn box, which performs quite well. I would really like to know why Apache is so random. This is a virtual host config: <VirtualHost *:81> ServerAdmin [email protected] ServerName example.com DocumentRoot /srv/http/site/bla Alias /static/ /srv/http/site/static Alias /media/ /srv/http/site/media WSGIScriptAlias / /srv/http/site/passenger_wsgi.py <Directory /> AllowOverride None </Directory> <Directory /srv/http/site> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> Ubuntu 10.04 Apache 2.2.14 mod_wsgi 2.8 nginx 0.7.65 Edit: I've put some code in the settings.py file of a site that writes the date to a tmp file whenever it's loaded. I can now see that the site is not randomly reloaded all the time, so Apache must be keeping it in memory. So, that's good, except it doesn't bring me closer to an answer... Edit: I just found an error that might also be related to this: File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1049, in _execute_child self.pid = os.fork() OSError: [Errno 12] Cannot allocate memory The server has 600 of 2000 MB free, which should be plenty. Is there a limit that is set on Apache or WSGI somewhere?

    Read the article

  • Windows XP long login (15 minutes +)

    - by Emily Pinkerton
    I'm having a lot of issues with our Windows XP SP3 machines (about 5, but every week another gets on the bandwagon of this issue). They take forever (15 minutes) to apply the user settings once our employee's enter their username and password to login to our domain. It only happens say if a user has reboot the machine and then when they go to log back in then it hangs forever. Reboot and restart are the key words for sure I've noticed with this issue. Here are things I have tested: •Made sure the DNS was set to point to our two servers (Server01 & Server02 are DNS Domain Controllers, 01 is primary and 02 backup). •No major changes have been applied to our network. •All profiles are local, so I have deleted out local profiles that aren't being used on those machines that run slow. •Also I have tried to enable and disable the Enable Fast Login under the local machines GP. It was not configured originally and when I tested both, it made the computer hang on "applying computer settings" for about 15 minutes. When it finally came up to the login screen the it was very quick to login to the domain. However this doesn't fix my issue, and even more frustrating upon setting it back to being not configured it now still takes for forever to apply computer settings. •I enabled the userenv log and here is what I see, but my experience is limited and I'm not sure how to read it exactly. (see below for log, this isn't the whole thing because it's really long) USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: LoadUserProfileP succeeded USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: Returning success. Final Information follows: USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-UserName = USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-lpProfilePath = < USERENV(2ec.2f0) 10:50:41:843 lpProfileInfo-dwFlags = 0x0 USERENV(2ec.2f0) 10:50:41:843 LoadUserProfile: Returning TRUE. hProfile = <0x818 USERENV(2ec.2f0) 10:50:41:984 IsSyncForegroundPolicyRefresh: Synchronous, Reason:NonCachedCredentials USERENV(2ec.248) 10:50:41:984 IsSyncForegroundPolicyRefresh: Synchronous, Reason:NonCachedCredentials USERENV(3c4.3dc) 10:51:26:166 LibMain: Process Name: C:\WINDOWS\system\wbem\wmiprvse.exe USERENV(2ec.5cc) 11:05:08:741 ProcessGPOs: network name is 192.168.49.0 USERENV(4a8.888) 11:05:08:804 GetProfileType: Profile already loaded. USERENV(4a8.888) 11:05:08:804 LoadProfileInfo: Failed to query central profile with error 2 USERENV(4a8.888) 11:05:08:804 GetProfileType: ProfileFlags is 0 Also this error is in the file quite a lot: USERENV(328.5bc) 11:05:29:733 GetUserDNSDomainName: Failed to impersonate user USERENV(328.834) 11:05:29:733 ImpersonateUser: Failed to impersonate user with 5. I'm really not sure what else to do with my limited experience, but I'm hoping someone can help me. I feel like I'm dealing with an issue way above my level and any knowledge I can gain out of getting this issue fixed would be amazing.

    Read the article

  • How to stop a random ramp in FCGI Processes Killing the server

    - by Andy Main
    So got the below earlier to day... Around that time the logs show a ramp in processes(600) and associated memory (1.2g), cpu usage load average (80) untill the server gave out. Server had to be hard reset by host as there was no ssh or plesk panel access. Fast CGI is configured as below and is setup for one high use site. As I understand it FcgidMaxProcesses 20 should protect against what happen but has not. I've read many forums with differing answers and references to many different fcgi directives, but have found nothing conclusive. Any one got some definitive answers on how to stop this sort of server process ramping and subsequent server failure? If you need more info let me know. Cheers Andy  /var/log/apache2/error_log [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17651 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17650 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17649 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17644 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17643 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17638 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17633 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17627 graceful kill fail, sending SIGKILL [Thu May 17 07:40:47 2012] [warn] mod_fcgid: process 17622 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17674 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17673 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17672 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17667 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17666 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17665 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17664 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17659 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17658 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17657 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17656 graceful kill fail, sending SIGKILL [Thu May 17 07:40:51 2012] [warn] mod_fcgid: process 17651 graceful kill fail, sending SIGKILL https://docs.google.com/a/thesugarrefinery.com/open?id=0B_XbpWChge0VRmFLWEZfR2VBb2M https://docs.google.com/a/thesugarrefinery.com/open?id=0B_XbpWChge0VWTcwZEhoV2Fqejg https://docs.google.com/a/thesugarrefinery.com/open?id=0B_XbpWChge0VUUtVWWFINHZjZ0U https://docs.google.com/a/thesugarrefinery.com/open?id=0B_XbpWChge0VZEVMclh6ZUdaOUE <IfModule mod_fcgid.c> <IfModule !mod_fastcgi.c> AddHandler fcgid-script fcg fcgi fpl </IfModule> FcgidIPCDir /var/lib/apache2/fcgid/sock FcgidProcessTableFile /var/lib/apache2/fcgid/shm FcgidIdleTimeout 40 FcgidProcessLifeTime 30 FcgidMaxProcesses 20 FcgidMaxProcessesPerClass 20 FcgidMinProcessesPerClass 0 FcgidConnectTimeout 30 FcgidIOTimeout 120 FcgidInitialEnv RAILS_ENV production FcgidIdleScanInterval 10 FcgidMaxRequestLen 1073741824 </IfModule>

    Read the article

  • Deleting windows.edb and unchecking Indexing service lead to hard drive file records swapping

    - by linni
    I followed the instructions listed here:http://www.mydigitallife.info/2007/09/18/turn-off-and-disable-search-indexing-service-in-windows-xp/ to free up space on hard drive by deleting the windows.edb indexing file... I also stopped windows search service as mentioned in the comments following the article. In addition to unchecking the "Allow Indexing Service to index this disk for fast file searching" check box on the properties dialog for the C:\ drive, I did the same for two usb connected hard drives (J:\ and I:\ ). I'm not sure why I did that, thought it might shrink the windows.edb file so I wouldn't have to delete it (which sounded a bit risky in my ears at the time). The file of course didn't shrink so I ended up deleting it and freeing up over 3 GB of space, yeehaw. However, as soon as I had done this I could not access the usb connected hard drives anymore. The error I got was "I:\photos is not accessible" "The file or directory is corrupted and unreadable" when I tried to open the photos directory on I:\ Here is where I enter the twilight zone... I try disconnecting I:\ usb hard drive. But XP shows me that instead J:\ drive has disconnected and I:\ is still there. So I disconnect both drives and restart the computer. I then connect one drive, but it lists up the contents of the other drive on root level. I tried connecting the drives vice versa and the same thing happens. I try taking one of the hard drives to another computer and when I connect it there it lists up not its own contents but the contents of the other hard drive and gives the same error as above when I try and access any of the folders (even folders on the root that have the same name as folders on the other drive (e.g. J:\photos and I:\photos)??? And no, this is not a me mixing up my drive letters. Computer Manager - Disk management shows the same result as explorer: The drive size is correct (one is 500GB, the other is 640GB) but the drive name is of the opposite drive, as long as the contents. Also, one drive was full of data and the other almost empty but they incorrectly show their free space status of the other drive. Somehow the usb drives seem to have switched file tables, file records, boot records or something, extremely weird! Even weirder, if I try and create a text file or folder on this drive, it works fine, accessing them, saving, whatever, all good, but accessing any other data on the drive gives me an error. Does anyone have a clue what is going on and more importantly, how I can restore the correct folder listings to access my family photos ??? cheers, linni

    Read the article

  • how to notify a program of another program? dll? directory? path?

    - by Brady Trainor
    I am trying to experiment with GNUS email in Emacs, in Windows (EDIT: x64 bit). I've got it to work in Ubuntu, but struggling with it in Windows. From http://www.gnu.org/software/emacs/manual/html_mono/emacs-gnutls.html#Help-For-Users I read in second paragraph: This is a little bit trickier on the W32 (Windows) platform, but if you have the GnuTLS DLLs (available from http://sourceforge.net/projects/ezwinports/files/ thanks to Eli Zaretskii) in the same directory as Emacs, you should be OK. I have downloaded and unzipped the gnutls-3.0.9-w32-bin package, but am not sure what to do with it. I have tried putting it in Program Files (x86), which is "the same directory as Emacs". I have tried putting it in the emacs-24.3 folder. I consider merging all the folders in between the two, but am hesitant as that seems a difficult troubleshoot attempt compared to my knowledge on these matters. I think Emacs needs to somehow see the gnutls binaries and/or dlls. My knowledge is limited on this. I've also struggled to understand PATHs for sometime now, and am not sure if that approach is relevant here. FYI, the emacs directory contains folders labeled bin, etc, info, leim, lisp and site-lisp. The gnutls directory contains folder labeled bin, include, lib and share. Hmm, now I'm finding lots of links on adding paths. Still, I'm skeptical that I would only add gnutls.exe path, as it seems the dlls are needed. Some additional data for Ramhound's first comment I have been attempting the (require 'gnutls) route. This seems to be the most relevant parts in the log: Opening connection to imap.gmail.com via tls... gnutls.c: [1] (Emacs) GnuTLS library not found Opening TLS connection to `imap.gmail.com'... Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com'...failed Opening TLS connection with `gnutls-cli --insecure -p 993 imap.gmail.com --protocols ssl3'...failed Opening TLS connection with `openssl s_client -connect imap.gmail.com:993 -no_ssl2 -ign_eof'...failed Opening TLS connection to `imap.gmail.com'...failed I am not sure what "in stallion" means. Emacs seems to have installed itself in program files (x86), so I assume it is 32 bit. I can try and figure out how to double check, but did not realize I would get such fast response time, and am headed out right now. I will try merging the files later tonight?

    Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >