execution speed - Page 326

mercurial: how to synchronize mq patches from a master repo as mq patches to a set of clone repos

- by dim

I have to run a dozen of different build tests on a code base maintained in a mercurial repository. I don't want to run serially these tests on same repository because they modify a set of common files and I want to run them in parallel on different machines. Also, after all tests are run I want to have access to latest test results from those test work areas. Currently I'm cloning the master repository a dozen of times and run in each clone one different test. Before each test execution I do a pull/update/purge preparation sequence in order to start the test on latest clean state. That's good for me. I'm also preparing new changes using mq extension that I would test on all clones as above before committing them. For testing some ready candidate mq patches I want somehow to deploy/synchronize them to be available in test clones and apply those ready for testing using some guard before running the test. Did anybody do this synchronization before? What's the most simple way to do it? Do I need to have versioned mq patches for that?

Read the article

Is it practical to program with your feet?

- by bmm

Has anyone tried using foot pedals in addition to the traditional keyboard and mouse combo to improve your effectiveness in the editor? Any actual experiences out there? Does it work, or is it just for carpal tunnel relief? I found one blog entry from a programmer who actually tried it: So now I can type using my feet for most of the modifier keys. I am using the pedals as I type this. I am still getting used to them, but the burning in my left wrist has definitely reduced. I think I can also type a little faster, but I am too lazy to do the speed tests with and without the pedals to verify this. On the negative side: Working out where to put your feet when you aren’t typing can be a little awkward. The pedals tend to move around the carpet, despite being metal and quite heavy. Some small spikes might have helped. Although the travel on the pedals is small, they are surprisingly stiff. Another programmer's experience: Anybody with hand pain must get foot pedals, since they can remove a tremendous load from your hands. I have two foot pedals, and use one for the SHIFT key, and the other for the CONTROL key. (I still type META by hand.) I have found that in the process of using the Emacs text editor to compose computer programs, I tend to use the SHIFT, CONTROL and META keys constantly, and it is easy to remove most of this load from one's hands. Some foot switch products: Savant Elite Triple Foot Switch FragPedal Bilbo Step On It!

Read the article

Is it possible that a single-threaded program is executed simultaneously on more than one CPU core?

- by Wolfgang Plaschg

When I run a single-threaded program that i have written on my quad core Intel i can see in the Windows Task Manager that actually all four cores of my CPU are more or less active. One core is more active than the other three, but there is also activity on those. There's no other program (besided the OS kernel of course) running that would be plausible for that activitiy. And when I close my program all activity an all cores drops down to nearly zero. All is left is a little "noise" on the cores, so I'm pretty sure all the visible activity comes directly or indirectly (like invoking system routines) from my program. Is it possible that the OS or the cores themselves try to balance some code or execution on all four cores, even it's not a multithreaded program? Do you have any links that documents this technique? Some infos to the program: It's a console app written in Qt, the Task Manager states that only one thread is running. Maybe Qt uses threads, but I don't use signals or slots, nor any GUI. Link to Task Manager screenshot: http://img97.imageshack.us/img97/6403/taskmanager.png This question is language agnostic and not tied to Qt/C++, i just want to know if Windows or Intel do to balance also single-threaded code on all cores. If they do, how does this technique work? All I can think of is, that kernel routines like reading from disk etc. is scheduled on all cores, but this won't improve performance significantly since the code still has to run synchronous to the kernel api calls. EDIT Do you know any tools to do a better analysis of single and/or multi-threaded programs than the poor Windows Task Manager?

Read the article

What algorithms are suitable for this simple machine learning problem?

- by user213060

I have a what I think is a simple machine learning question. Here is the basic problem: I am repeatedly given a new object and a list of descriptions about the object. For example: new_object: 'bob' new_object_descriptions: ['tall','old','funny']. I then have to use some kind of machine learning to find previously handled objects that had similar descriptions, for example, past_similar_objects: ['frank','steve','joe']. Next, I have an algorithm that can directly measure whether these objects are indeed similar to bob, for example, correct_objects: ['steve','joe']. The classifier is then given this feedback training of successful matches. Then this loop repeats with a new object. a Here's the pseudo-code: Classifier=new_classifier() while True: new_object,new_object_descriptions = get_new_object_and_descriptions() past_similar_objects = Classifier.classify(new_object,new_object_descriptions) correct_objects = calc_successful_matches(new_object,past_similar_objects) Classifier.train_successful_matches(object,correct_objects) But, there are some stipulations that may limit what classifier can be used: There will be millions of objects put into this classifier so classification and training needs to scale well to millions of object types and still be fast. I believe this disqualifies something like a spam classifier that is optimal for just two types: spam or not spam. (Update: I could probably narrow this to thousands of objects instead of millions, if that is a problem.) Again, I prefer speed when millions of objects are being classified, over accuracy. What are decent, fast machine learning algorithms for this purpose?

Read the article

How do I Unit Test Actions without Mocking that use UpdateModel?

- by Hellfire

I have been working my way through Scott Guthrie's excellent post on ASP.NET MVC Beta 1. In it he shows the improvements made to the UpdateModel method and how they improve unit testing. I have recreated a similar project however anytime I run a UnitTest that contains a call to UpdateModel I receive an ArgumentNullException naming the controllerContext parameter. Here's the relevant bits, starting with my model: public class Country { public Int32 ID { get; set; } public String Name { get; set; } public String Iso3166 { get; set; } } The controller action: [AcceptVerbs(HttpVerbs.Post)] public ActionResult Edit(Int32 id, FormCollection form) { using ( ModelBindingDataContext db = new ModelBindingDataContext() ) { Country country = db.Countries.Where(c => c.CountryID == id).SingleOrDefault(); try { UpdateModel(country, form); db.SubmitChanges(); return RedirectToAction("Index"); } catch { return View(country); } } } And finally my unit test that's failing: [TestMethod] public void Edit() { CountryController controller = new CountryController(); FormCollection form = new FormCollection(); form.Add("Name", "Canada"); form.Add("Iso3166", "CA"); var result = controller.Edit(2 /*Canada*/, form) as RedirectToRouteResult; Assert.IsNotNull(result, "Expected to be redirected on successful POST."); Assert.AreEqual("Show", result.RouteName, "Expected to redirect to the View action."); } ArgumentNullException is thrown by the call to UpdateModel with the message "Value cannot be null. Parameter name: controllerContext". I'm assuming that somewhere the UpdateModel requires the System.Web.Mvc.ControllerContext which isn't present during execution of the test. I'm also assuming that I'm doing something wrong somewhere and just need to pointed in the right direction. Help Please!

Read the article

applicationWillTerminate Appears to be Inconsistent

- by Lauren Quantrell

This one has me batty. In applicationWillTerminate I am doing two things: saving some settings to the app settings plist file and updating any changed data to the SQLite database referenced in the managedObjectContext. Problem is it works sometimes and not others. Same issue in the simulator and on the device. If I hit the home button while the app is running, I can only sometimes get the data to store in the plist and into the CoreData store. It seems that it's both works or neither works, and it makes no difference if I switch the execution order (saveState, managedObjectContext or managedObjectContext, saveState). I can't figure out how this can happen. Any help is greatly appreciated. lq AppDelegate.m @synthesize rootViewController; - (void)applicationWillTerminate:(UIApplication *)application { [rootViewController saveState]; NSError *error; if (managedObjectContext != nil) { if ([managedObjectContext hasChanges] && ![managedObjectContext save:&error]) { // Handle error exit(-1); // Fail } } } RootViewController.m - (void)saveState { NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults]; [userDefaults setInteger:self.someInteger forKey:kSomeNumber]; [userDefaults setObject:self.someArray forKey:kSomeArray]; }

Read the article

use of assertions for type checking in php?

- by user151841

I do some checking of arguments in my classes in php using exception-throwing functions. I have functions that do a basic check ( ===, in_array etc ) and throw an exception on false. So I can do assertNumeric($argument, "\$argument is not numeric."); instead of if ( ! is_numeric($argument) ) { throw new Exception("\$argument is not numeric."); } Saves some typing I was reading in the comments of the php manual page on assert() that As noted on Wikipedia - "assertions are primarily a development tool, they are often disabled when a program is released to the public." and "Assertions should be used to document logically impossible situations and discover programming errors— if the 'impossible' occurs, then something fundamental is clearly wrong. This is distinct from error handling: most error conditions are possible, although some may be extremely unlikely to occur in practice. Using assertions as a general-purpose error handling mechanism is usually unwise: assertions do not allow for graceful recovery from errors, and an assertion failure will often halt the program's execution abruptly. Assertions also do not display a user-friendly error message." This means that the advice given by "gk at proliberty dot com" to force assertions to be enabled, even when they have been disabled manually, goes against best practices of only using them as a development tool So, am I 'doing it wrong'? What other/better ways of doing this are there?

Read the article

Self - hosted WCF server and SSL

- by jitm

Hello, There is self - hosted WCF server (Not IIS), and was generated certificates (on the Win Xp) using command line like makecert.exe -sr CurrentUser -ss My -a sha1 -n CN=SecureClient -sky exchange -pe makecert.exe -sr CurrentUser -ss My -a sha1 -n CN=SecureServer -sky exchange -pe These certificates was added to the server code like this: serviceCred.ServiceCertificate.SetCertificate(StoreLocation.LocalMachine, StoreName.My, X509FindType.FindBySubjectName, "SecureServer"); serviceCred.ClientCertificate.SetCertificate(StoreLocation.LocalMachine, StoreName.My, X509FindType.FindBySubjectName, "SecureClient"); After all previous operation I created simple client to check SSL connection to the server. Client configuration: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="BasicHttpBinding_IAdminContract" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Basic"/> </security> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="https://myhost:8002/Admin" binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_IAdminContract" contract="Admin.IAdminContract" name="BasicHttpBinding_IAdminContract" /> </client> </system.serviceModel> </configuration> Code: Admin.AdminContractClient client = new AdminContractClient("BasicHttpBinding_IAdminContract"); client.ClientCredentials.UserName.UserName = "user"; client.ClientCredentials.UserName.Password = "pass"; var result = client.ExecuteMethod() During execution I receiving next error: The provided URI scheme 'https' is invalid; expected 'http'.\r\nParameter name: via Question: How to enable ssl for self-hosted server and where should I set - up certificates for client and server ? Thanks.

Read the article

web browser become slow or no response after several ajax calls

- by Patrick

I'm totally newbie to jquery and ajax, my recently project is to help the representatives (reps) to manage customer quotations online. I have a page which displays all the quotations in a big table. I've managed to use ajax to fetch and display the quotations which associate to a particular rep after i click that rep's name. But the only problem is the speed of response. The first few clicks are ok and very smooth. But after several tries, the response become slow and I cant even scroll down the webpage, and later on the web browser craches.... Please have a look at my ajax code. here it is:  <script type="text/javascript"> //<![CDATA[ $(function(){ $("a.repID").click(function(){ $('div#loader').append("<p align='center'><img src='images/loadingbar2.gif' id='loading' /></p>"); var repID = $(this).attr("title"); $.ajax({ type:'POST', url:'quote_info.php', data:'repID=' + repID, cache: false, success:function(data) { $("#container").html('<div id="content">' + data + '</div>'); $("#loading").fadeOut(500, function() {$(this).remove();}); $("#sortme").tablesorter(); $('.tbl').fixedtableheader(); } }); return false; }); }); </script>

Read the article

Registry access error when Migrating ASP.NET application to IIS7

- by fande455

I'm running windows 7 64-bit and iis7. I'm trying to setup a web application that was previously in iis6 on XP. It's giving me the error below. I've added the network service user to the Performance Monitor Users group to no avail. Access to the registry key 'Global' is denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Access to the registry key 'Global' is denied. ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via , the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.

Read the article

SQL Where Clause Against View

- by Adam Carr

I have a view (actually, it's a table valued function, but the observed behavior is the same in both) that inner joins and left outer joins several other tables. When I query this view with a where clause similar to SELECT * FROM [v_MyView] WHERE [Name] like '%Doe, John%' ... the query is very slow, but if I do the following... SELECT * FROM [v_MyView] WHERE [ID] in ( SELECT [ID] FROM [v_MyView] WHERE [Name] like '%Doe, John%' ) it is MUCH faster. The first query is taking at least 2 minutes to return, if not longer where the second query will return in less than 5 seconds. Any suggestions on how I can improve this? If I run the whole command as one SQL statement (without the use of a view) it is very fast as well. I believe this result is because of how a view should behave as a table in that if a view has OUTER JOINS, GROUP BYS or TOP ##, if the where clause was interpreted prior to vs after the execution of the view, the results could differ. My question is why wouldn't SQL optimize my first query to something as efficient as my second query?

Read the article

Workflow UI Integration - is WF a good approach?

- by AJ

Somewhat similar to this question, except we haven't decided that we're going with WF yet. I'm working on designing a system that requires a series of decisions and activities on a "work object," so I naturally began to consider workflow, specifically WF. What I'm wondering is if WF is a good solution for a situation like the following (oversimplified for this question) case (please forgive bad ascii art): __________________ | Gather some info | | (web page) | |__________________| | | / \ / \ / \ / \ / cond \ \ 1 / \ / \ / \ / \ / | | ______________|_______________ | | | | | ______|______ ______|________ / do some / | Get more info | / process / | (web page) | /____________/ |_______________| | | / \ / \ / \ / cond. \ \ 2 / \ / \ / \ / | | |__________________ | | | | _____|_____ _____|_____ / some / / another / / process / / process / /__________/ /__________/ The part I'm struggling with is the get more info (web page) step and what happens subsequent, which would mean a halt in the execution of the workflow runtime. I'm aware that this is possible, but I'm not sure that WF is the best approach for this type of code, as the user interaction may be required at many different points through the entire workflow, and the workflow will drive what data entry screens are needed. We are using a WinForms/ASP.NET web forms package for UI, which is homegrown and difficult to push deployments on, so something like SharePoint integration is out of the question. Our back-end is DB2, and the workflow code (whether it's in WF or otherwise) will need to interact with that as well. I guess the bottom line is, should we look into using WF for this, or would we be better served just coding it ourselves? Can WF easily integrate data entry screens to capture information that can be used further on in the workflow?

Read the article

Optimizing PHP require_once's for low disk i/o?

- by buggedcom

Q1) I'm designing a CMS (-who isn't!) but priority is being given to caching. Literally everything is cached. DB rows, DB id queries, Configuration data, processed data, compiled templates. Currently it has two layers of caching. The first is a opcode cache or memory cache such as apc, eaccelerator, xcache or memcached. If an entry is not found in there it is then searched for in the secondary slow cache, ie php includes. Are the opcode caches actually faster than doing a require_once to a php file with a var_export'd array of data in it? My tests are inconclusive as my development box (5.3 of XAMPP) keeps throwing errors installing any of the aforementioned programs. Q2) The CMS has numerous helper classes that are autoloaded on demand instead of loading all files. Mostly each has a require before it so no autoloading needs to take place, however this is not the question. Because a page script can have up to 50/60 helper files included I have a feeling that if the site was under pressure it would buckle because of all the i/o that this incurs. Ignore for the moment that there is output cache in place that would remove the need for what I am about to suggest, and also that opcode caches would render this moot. What I have tried to do is join all the helper files required for the scripts execution in one single file. This is achievable and works well, however it has a side effect of greatly increasing the memory usage dramatically even though technically the same code is being used. What are your thoughts and opinions on this?

Read the article

Fast JSON serialization (and comparison with Pickle) for cluster computing in Python?

- by user248237

I have a set of data points, each described by a dictionary. The processing of each data point is independent and I submit each one as a separate job to a cluster. Each data point has a unique name, and my cluster submission wrapper simply calls a script that takes a data point's name and a file describing all the data points. That script then accesses the data point from the file and performs the computation. Since each job has to load the set of all points only to retrieve the point to be run, I wanted to optimize this step by serializing the file describing the set of points into an easily retrievable format. I tried using JSONpickle, using the following method, to serialize a dictionary describing all the data points to file: def json_serialize(obj, filename, use_jsonpickle=True): f = open(filename, 'w') if use_jsonpickle: import jsonpickle json_obj = jsonpickle.encode(obj) f.write(json_obj) else: simplejson.dump(obj, f, indent=1) f.close() The dictionary contains very simple objects (lists, strings, floats, etc.) and has a total of 54,000 keys. The json file is ~20 Megabytes in size. It takes ~20 seconds to load this file into memory, which seems very slow to me. I switched to using pickle with the same exact object, and found that it generates a file that's about 7.8 megabytes in size, and can be loaded in ~1-2 seconds. This is a significant improvement, but it still seems like loading of a small object (less than 100,000 entries) should be faster. Aside from that, pickle is not human readable, which was the big advantage of JSON for me. Is there a way to use JSON to get similar or better speed ups? If not, do you have other ideas on structuring this? (Is the right solution to simply "slice" the file describing each event into a separate file and pass that on to the script that runs a data point in a cluster job? It seems like that could lead to a proliferation of files). thanks.

Read the article

IUsable: controlling resources in a better way than IDisposable

- by Ilya Ryzhenkov

I wish we have "Usable" pattern in C#, when code block of using construct would be passed to a function as delegate: class Usable : IUsable { public void Use(Action action) // implements IUsable { // acquire resources action(); // release resources } } and in user code: using (new Usable()) { // this code block is converted to delegate and passed to Use method above } Pros: Controlled execution, exceptions The fact of using "Usable" is visible in call stack Cons: Cost of delegate Do you think it is feasible and useful, and if it doesn't have any problems from the language point of view? Are there any pitfalls you can see? EDIT: David Schmitt proposed the following using(new Usable(delegate() { // actions here }) {} It can work in the sample scenario like that, but usually you have resource already allocated and want it to look like this: using (Repository.GlobalResource) { // actions here } Where GlobalResource (yes, I know global resources are bad) implements IUsable. You can rewrite is as short as Repository.GlobalResource.Use(() => { // actions here }); But it looks a little bit weird (and more weird if you implement interface explicitly), and this is so often case in various flavours, that I thought it deserve to be new syntactic sugar in a language.

Read the article

Embedded Vimeo Video Callbacks

- by Andrew

This post is kind of a follow up to a post I made earlier in regards to HTML5 video callbacks. In that thread, I was given a great piece of code that would allow for the browser to be informed of when the video stops playing and then fire off an action (with jQuery). This is the code I'm currently using: $('video.normal').bind('ended', function(){ $(this).fadeOut().queue(function(){ $(this).siblings('.post-video').fadeIn(); $(this).dequeue(); }); }); Which basically fades the video out when it's completed and brings a poster frame of the video (or similar image) back into view. Well, the scope of the project has changed and now the client is asking for true full screen video and different size videos to be delivered based on user connection speed, something that's a little over my head and a lot over budget. So I've been researching and a Vimeo Plus player seems like a great alternative for visitors using a desktop browser (HD embeds, true full screen, and more). Thing is, I need that above code to continue working in some capacity or another, so does the embedded Vimeo player offer a similar callback that I can utilize? Or am I SOL here? Thanks in advance!

Read the article

How to add an image to an SSRS report with a dynamic url?

- by jrummell

I'm trying to add an image to a report. The image src url is an IHttpHandler that takes a few query string parameters. Here's an example: <img src="Image.ashx?item=1234567890&lot=asdf&width=50" alt=""/> I added an Image to a cell and then set Source to External and Value to the following expression: ="Image.ashx?item="+Fields!ItemID.Value+"&lot="+Fields!LotID.Value+"&width=50" But when I view the report, it renders the image html as: <IMG SRC="" /> What am I missing? Update Even if I set Value to "image.jpg" it still renders an empty src attribute. I'm not sure if it makes a difference, but I'm using this with a VS 2008 ReportViewer control in Remote processing mode. Update I was able to get the images to display in the Report Designer (VS 2005) with an absolute path (http://server/path/to/http/handler). But they didn't display on the Report Manager website. I even set up an Unattended Execution Account that has access to the external URLs.

Read the article

AuthorizationExecuteWithPrivileges and osascript failing

- by cygnl7

I'm attempting to execute an uninstaller (written in AppleScript) through AuthorizationExecuteWithPrivileges. I'm setting up my rights after creating an empty auth ref like so: char *tool = "/usr/bin/osascript"; AuthorizationItem items = {kAuthorizationRightExecute, strlen(tool), tool, 0}; AuthorizationRights rights = {sizeof(items)/sizeof(AuthorizationItem), &items}; AuthorizationFlags flags = kAuthorizationFlagDefaults | kAuthorizationFlagExtendRights | kAuthorizationFlagPreAuthorize | kAuthorizationFlagInteractionAllowed; status = AuthorizationCopyRights(authorizationRef, &rights, NULL, flags, NULL); Later I call: status = AuthorizationExecuteWithPrivileges(authorizationRef, tool, kAuthorizationFlagDefaults, (char *const *)args, NULL); On Snow Leopard this works fine, but on Leopard I get the following in syslog.log: Apr 19 15:30:09 hostname /usr/bin/osascript[39226]: OpenScripting.framework - 'gdut' event blocked in process with mixed credentials (issetugid=0 uid=501 euid=0 gid=20 egid=20) Apr 19 15:30:12: --- last message repeated 1 time --- ... Apr 19 15:30:12 hostname [0x0-0x2e92e9].com.example.uninstaller[39219]: /var/folders/vm/vmkIi0nYG8mHMrllaXaTgk+++TI/-Tmp-/TestApp_tmpfiles/Uninstall.scpt: Apr 19 15:30:12 hostname [0x0-0x2e92e9].com.example.uninstaller[39219]: execution error: «constant afdmasup» doesn’t understand the «event earsffdr» message. (-1708) Am I going about this all wrong? I just want to run the equivalent of "sudo /usr/bin/osascript ..."

Read the article

How to form submit and show a different page in ASP.Net MVC?

- by melaos

hi guys i'm new to asp.net mvc.. so basically i just build up a two page app which takes the registration information of the user and post it to the database. i use a lot of jquery and ajax calls to retrieve data from the database using linq to sql stored proc object. and currently i'm stuck at one page where after the user submits the form it should redirect him to /Home/AddProduct. What i found was the error: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. what used on my form are basically a combination of html controls, asp.net controls and some asp.net mvc type controls. i submit the form using action="/Home/ProductAdded" and after doing some googling i found i was supposed to add in the machine key but after doing so, the index page becomes unviewable. because it couldn't find the index file now. removing the action helps, but now it just doesn't go anywhere. so what am i missing here? i feel i'm missing a lot of fundamentals understanding about asp.net mvc and i don't even know how to submit a form and go to a different page here!!

Read the article

(solved) jQuery click and drag/scroll window: jagged movement

- by Josh

Edit: derp, using pageX/Y instead of clientX/Y -- apparently scrollBy expects input with that offset rather than the other. Jaggy movement gone. I am getting jagged movement when doing small scroll increments using the following bindings. Can anyone point me in the right direction for how to smooth this out? FYI, its intermittent. It seems like, if I click and hold for a second, then drag at a decent speed there are no problems. Edit: What the hell? I get this output on debug... obvious jog backwards and forwards. This will happen in succession and seems to have no correlation with the mouse, other than the mouse is moving. x 398 : 403 y 374 : 377 x 403 : 399 y 377 : 374 x 399 : 404 y 374 : 377 Josh sococo.client.panMap = function(e){ e.preventDefault(); var movex = sococo.client.currX - e.pageX ; var movey = sococo.client.currY - e.pageY; console.log( sococo.client.currX +" : " + e.pageX ); window.scrollBy(movex,movey); sococo.client.currY = e.pageY; sococo.client.currX = e.pageX; } $(document).mousedown( function(e){ e.preventDefault(); sococo.client.currX = e.pageX; sococo.client.currY = e.pageY; $(document).bind( "mousemove", sococo.client.panMap ); }); $(document).mouseup( function(e){ e.preventDefault(); $(document).unbind( "mousemove", sococo.client.panMap ); });

Read the article

How to preload images using jquery for carousel?

- by Pandiya Chendur

I used jquery stepcarousel plugin and it works fine... But how to preload images that is used by the plugin... I am using this, <div id="mygallery" class="stepcarousel"> <div class="belt"> <div class="panel"> <img src="Images/img1.jpg" /> </div> <div class="panel"> <img src="Images/img2.jpg" /> </div> </div> </div> <script type="text/javascript"> stepcarousel.setup({ galleryid: 'mygallery', //id of carousel DIV beltclass: 'belt', //class of inner "belt" DIV containing all the panel DIVs panelclass: 'panel', //class of panel DIVs each holding content autostep: { enable: true, moveby: 1, pause: 3000 }, panelbehavior: { speed: 500, wraparound: false, persist: true }, defaultbuttons: { enable: true, moveby: 1, leftnav: ['Images/lft_arrow.jpg', -5, 220], rightnav: ['Images/rit_arrow.jpg', -5, 220] }, statusvars: ['statusA', 'statusB', 'statusC'], //register 3 variables that contain current panel (start), current panel (last), and total panels contenttype: ['inline'] //content setting ['inline'] or ['ajax', 'path_to_external_file'] }) </script> How to preload images used by mygallery div such that i can avoid flickering.....

Read the article

Advice on improving programming skills, learning capabilities?

- by anonymous-coward1234

Hi all, After 2,5 years of professional Java programing, I still have problems that make my job difficult and, more importantly - more times that I would like to admit - not enjoyable. I would like to ask for advice by more experienced people on ways that would help me overcome them. These are the problems I have: I do not absorb new knowledge easily. Even when I understand something, after a couple of days I easily forget even basic stuff. Other co-workers, even with the same working experience, when reading new technologies put things easily into "context", and are able to compare in "real time| similar technologies they already have used. I always try to address all the issues to whatever I am doing at one go, which results in me trying to resolve too many problems at the same time, losing completely control. I find it difficult to make my mind on a single problem that I should address first, and even when I do, and find myself throwing away code that I wrote because I started addressing the wrong issue first. As far as architecture and data modeling is concerned, I have difficulty making decisions on what objects must be created, with what hierarchy, interfaces, abstraction etc. I imagine that - to a certain degree - these things come with experience. But after 2,5 years of Java programming, I would expect myself to have come much farther that I have come, both in terms of absorption and experience. Is there a way to improve my learning speed? Any books, methods, advice is welcome.

Read the article

Transitive SQL query on same table

- by MiKu

Read the article

Algorithm to determine which points should be visible on a map based on zoom

- by lgratian

Hi! I'm making a Google Maps-like application for a course at my Uni (not something complex, it should load the map of a city for example, not the whole world). The map can have many layers, including markers (restaurants, hospitals, etc.) The problem is that when you have many points and you zoom out the map it doesn't look right. At this zoom level only some points need to be visible (and at the maximum map size, all points). The question is: how can you determine which points should be visible for a specified zoom level? Because I have implemented a PR Quadtree to speed up rendering I thought that I could define some "high-priority" markers (that are always visible, defined in the map editor) and put them in a queue. At each step a marker is removed from the queue and all it's neighbors that are at least D units away (D depends on the zoom levels) are chosen and inserted in the queue, and so on. Is there any better way than the algorithm I thought of? Thanks in advance!

Read the article

C# NullReferenceException when passing DataTable

- by Timothy

I've been struggling with a NullReferenceException and hope someone here will be able to point me in the right direction. I'm trying to create and populate a DataTable and then show the results in a DataGridView control. The basic code follows, and Execution stops with a NullReferenceException at the point where I invoke the new UpdateResults_Delegate. Oddly enough, I can trace entries.Rows.Count successfully before I return it from QueryEventEntries, so I can at least show 1) entries is not a null reference, and 2) the DataTable contains rows of data. I know I have to be doing something wrong, but I just don't know what. private delegate void UpdateResults_Delegate(DataTable entries); private void UpdateResults(DataTable entries) { dataGridView.DataSource = entries; } private void button_Click(object sender, EventArgs e) { Thread t = new Thread(new ThreadStart(PerformQuery)); t.Start(); } private void PerformQuery() { DateTime start = new DateTime(dateTimePicker1.Value.Year, dateTimePicker1.Value.Month, dateTimePicker1.Value.Day, 0, 0, 0); DateTime stop = new DateTime(dateTimePicker2.Value.Year, dateTimePicker2.Value.Month, dateTimePicker2.Value.Day, 0, 0, 0); DataTable entries = QueryEventEntries(start, stop); Invoke(new UpdateResults_Delegate(UpdateResults), entries); } private DataTable QueryEventEntries(DateTime start, DateTime stop) { DataTable entries = new DataTable(); entries.Columns.Add("colEventType", typeof(Int32)); entries.Columns.Add("colTimestamp", typeof(Int32)); entries.Columns.Add("colDetails", typeof(String)); ... conn.Open(); using (SqlDataReader r = cmd.ExecuteReader()) { while (r.Read()) { entries.Rows.Add(result.GetInt32(0), result.GetInt32(1), result.GetString(2)); } } return entries; }

Search Results

Search found 10033 results on 402 pages for 'execution speed'.

Page 326/402 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333 | Next Page >

- by dim

- by bmm

- by Wolfgang Plaschg

- by user213060

- by Hellfire

- by Lauren Quantrell

- by user151841

- by jitm

- by Patrick

- by fande455

- by Adam Carr

- by AJ

- by buggedcom

- by user248237

- by Ilya Ryzhenkov

- by Andrew

- by jrummell

- by cygnl7

- by melaos

- by Josh

- by Pandiya Chendur

- by anonymous-coward1234

- by MiKu

- by lgratian

- by Timothy

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333 | Next Page >