Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 326/750 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• Kernel Panic Fatal Machine Check

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-(

  Read the article

• Sharing samba-folder with root access

  - by Industrial

  Hi everyone, I have a staging server in my network running Ubuntu server 10.10, being my main development area. As I need to access the files in the Apache root from other computers in the network, I have setup samba with the following settings: [www] comment = Apache root www path = /var/www writable = yes force user = root force group = root On the host computer, running Ubuntu 10.10 desktop, I am trying to mount the drive with a bash file looking like below: #!/bin/bash sudo mount -t cifs //192.168.1.5/www /media/www/ -o username=myusername,password=mypassword,rw,iocharset=utf8,file_mode=0777,dir_mode=0777 What happens is that I get mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) thrown in my face whilst trying to execute the mount. I've done exactly the same, with exactly the same smb.conf & mount-bash file on another computer in my network, but this just wont work. What am I doing wrong? I am running out of ideas.

  Read the article

• glsl demo suggestions ?

  - by brainydexter

  In a lot of places I interviewed recently, I have been asked many a times if I have worked with shaders. Even though, I have read and understand the pipeline, the answer to that question has been no. Recently, one of the places asked me if I can send them a sample of 'something' that is "visually polished". So, I decided to take the plunge and wrote some simple shader in GLSL(with opengl).I now have a basic setup where I can use vbos with glsl shaders. I have a very short window left to send something to them and I was wondering if someone with experience, could suggest an idea that is interesting enough to grab someone's attention. Thanks

  Read the article

• Where do my programs get installed?

  - by Micah

  Coming from windows I'm used to having everything installed in c:\program files\company\product. On Ubuntu I'm totally stumped. It seems like everything I install winds up somewhere different. Somethings are in /bin some in /home/myuser and others in /etc or /usr. I can't seem to figure this out. In particular I'm trying to find where they're located so I can either setup shortcuts on the task bar or associate them with other programs (like my greasemonkey editor) but I'm not having any luck.

  Read the article

• How can I fix latency problems for car game?

  - by Freddy

  Basically I'm trying to make a online car racing game for IOS using Game Center real time multiplayer. I have setup a timer that sends data every 0.02 seconds to the other player with the current position and current angle. However sometimes, it will take LONGER then these 0.02 seconds for the package to be sent and then received. In this case i have implemented a method that "calculate" what the next position should be if no position is received based on the last position and angle. However, when the data then receives for let say 0.04 seconds after, it will change back to the last position, which will result in the car "jumping" back and lag. And If i just keep ignoring the data it will never take any input from the other user. Is their any way to prevent this? I suppose this needs to be fixed with some client-sided algorithm.

  Read the article

• Python GUI and MVC - get variable from other module

  - by lyvic

  I am trying to split my code in different layers: GUI, reading the GUI, creating input, calculating the model, interpreting data, creating view, sending the view to the GUI. I got the idea of the MVC and would like to try to build my program that way. But I'm a little confused about how to exchange information between those modules. I'm running into problems with undefined global names and so forth. Example code how I'm trying to get out of this can be found here: http://stackoverflow.com/questions/17385373/setup-a-mvc-mvw-system-in-python-with-tkinter

  Read the article

• Desktop sharing options for Ubuntu 12.04 with Unity

  - by Stefan Buynov

  I would like to be able to access my office Ubuntu 12.04 machine from home, from a Mac Mini with Mac OSX. I have a VPN and I am able to access my office machine over SSH, so connectivity is not a problem. I browsed other questions, and it seems that there are several options: VNC XRDP FreeNX (haven't heard this one before) Are there any other? I have been using Remote Desktop on Windows before, and I actually like it. Not sure how well is XRDP implemented. I also used VNC several years back, and I didn't like its performance back then - not sure if things have changed since then. As I said above, the machine I want to access is running Ubuntu 12.04, with Unity. And I am using Unity by choice - I really like it and would like to continue using it :) The client computer is running Mac OSX (Snow Leopard). Based on your previous experience what is the best setup for this environment?

  Read the article

• Reminder: For a Complete View Of Your Concurrent Processing Take A Look At The CP Analyzer!

  - by LuciaC

  For a complete view of your Concurrent Processing take a look at the CP Analyzer!  Doc ID 1411723.1 has the script to download and a 9 min video. The Concurrent Processing Analyzer is a Self-Service Health-Check script which reviews the overall Concurrent Processing Footprint, analyzes the current configurations and settings for the environment providing feedback and recommendations on Best Practices.This is a non-invasive script which provides recommended actions to be performed on the instance it was run on.  For production instances, always apply any changes to a recent clone to ensure an expected outcome. E-Business Applications Concurrent Processing Analyzer Overview E-Business Applications Concurrent Request Analysis E-Business Applications Concurrent Manager Analysis Identifies Concurrent System Setup and configurations Identifies and recommends Concurrent Best Practices Easy to add Tool for regular Concurrent Maintenance Execute Analysis anytime to compare trending from past outputs Feedback welcome!

  Read the article

• Improve Your Photo Prints By Properly Preparing Your Printer

  - by Eric Z Goodnight

  Whether your photo printer is new or has been collecting dust between the holidays, you’ve likely spent a few frustrating moments setting up the machine. But did you know proper setup can improve the quality of your prints? Spend a few moments looking over the basics, and see why it can be a good idea to keep your drivers updated, learn about some basic printer maintenance, and see some advanced options for setting up great prints. Keep reading Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation Winter Theme for Windows 7 from Microsoft Score Free In-Flight Wi-Fi Courtesy of Google Chrome

  Read the article

• Which programming language suits a system that must work without user input

  - by Ruud

  I'm building a prototype of a device that will function much alike a digital photoframe. It will display images retrieved from the internet. The device must start up and run the photoframe. It will have no user interface. The device has a minimal ubuntu installation, but I could install Xorg or whatever needed. Question: I have trouble figuring out which programming language will be suitable. I've just started using Python to try out several things and I am able to download and display images. I guess that means Python can do what I'd like, but is it suitable as a language that will be run on boot without any user interference? Related questions: - How do I set up Linux to start that script automatically? - How to setup a second Python script as a server that runs in the background to retrieve images before they are displayed (Because I think I'll need threading of some sort?)

  Read the article

• Thinktecture IdentityServer Azure Edition RC

  - by Your DisplayName here!

  I found some time over the holidays to finalize the Azure edition of IdentityServer. http://identityserver.codeplex.com/releases/view/81206 The biggest difference to the on-premise version (and earlier Azure betas) is, that by default IdSrv now uses Azure Storage for all data storage (configuration & user data). This means that there is no need anymore for SQL Azure (which is still supported out of the box – just not the default anymore). The download includes a readme file with setup instructions. In a nutshell: Create a new hosted service and upload your certificates Modify the service configuration file in the download to your needs (signing cert, connection strings to storage…) Deploy the package via the portal or other tools Use the new Powershell scripts to add users If you encounter any problem, please give me feedback.

  Read the article

• Can I use Ubuntu as a wireless media server which performs all decoding/processing server-side?

  - by AthloX

  I want to setup UBUNTU 12.04 desktop as Home media server. I have window 7 netbook and UBUNTU 12.04lts laptop even a samsun galaxy note tablet (android). Two desktop in other room with dualboot win7 and ubuntu. SHARP AQUOS Plasma Tv with Wi-Fi connected. I want to install ubuntu as media server to stream audio/video files over wi-fi. Not only this i want this media server to use its own processing power to decode ans stream so that on remote end only file can play without using their own resource. Is it possible to use ubuntu as media server to stream files without making the remote end to use there own resource. I want only bandwidth of Wi-Fi to be use in this and media center hardware resource.Remote end gadget should use only speaker and screen and not processing power of their own. Please any suggestion is it possible to do so ?

  Read the article

• Sun & Moon Movement

  - by Thomas Mosey

  I'm creating a 2D HTML5 Canvas Game and am stuck on how to go about animating my Sun & Moon. The current setup is basically setting the moon at -1024 on the X-axis and the sun at 0 and animating them at 1 pixel a second. My canvas width is 1024 pixels and whenever the sun/moons X position crosses over the width of the canvas, it's X position is then set to -1024 to repeat the animation. What I am trying to do is get it to sync up with my day/night cycles. Each day is 10000 ticks long (A tick being added every frame) with Day/Night being 50% each (5000 ticks each). What I am trying to calculate is what I'll need to add to the X position of each per frame to get the sun from an X of 0 to 1024 after 5000 ticks/frames. Any help is appreciated.

  Read the article

• Bitbucket and a small development house

  - by Marlon

  I am in the process of finally rolling Mercurial as our version control system at work. This is a huge deal for everyone as, shockingly, they have never used a VCS. After months of putting the bug in management's ears, they finally saw the light and now realise how much better it is than working with a network of shared folders! In the process of rolling this out, I am thinking of different strategies to manage our stuff and I am leaning towards using Bitbucket as our "central" repository. The projects in Bitbucket will solely be private projects and everyone will push and pull from there. I am open to different suggestions, but has anyone got a similar setup? If so, what caveats have you encountered?

  Read the article

• XEN 4.1 missing from the Grub Menu

  - by Sid

  I installed Xen with following Commands. apt-get install xen-hypervisor-4.1-i386 apt-get install xen-utils-4.1 apt-get install xenwatch apt-get install xen-tools apt-get install xen-utils-common apt-get install xenstore-utils apt-get install virtinst apt-get install virt-viewer apt-get install virt-manager as given in http://www.beyondlinux.com/2011/11/02/install-xen-4-1-and-setup-your-cloud-os-on-ubuntu-11-10/ But I cant see any entry for Xen 4.1 in my GRUB Menu upon reboot. (As soon as I install above listed packages) Any solution? Please Help

  Read the article

• Good PPA for ffmpeg

  - by teeks99

  Its annoying that the default ffmpeg in ubuntu's repositories is outdated and hobbled for legal reasons, however, there's a great page on the forums that walks you through building it from scratch: http://ubuntuforums.org/showthread.php?t=786095 (I also add in support for --enable-libdc1394 --enable-libgsm --enable-libopenjpeg --enable-libschroedinger --enable-libspeex when I build, which is nice, but not essential.) Anyway, I'm getting set to setup a computer lab running ubuntu for a multimedia class I'm teaching, and I was wondering if there was PPA out there that did something similar to what is available when building from scratch. The things I absolutely need from it are up-to-date libxvid, libx264, libfaac, and libmp3lame support plus the un-encumbered stuff (vorbis, theora, vpx). Is there a PPA out there that provides something like this?

  Read the article

• Why does my computer just keep restarting while trying to install Ubuntu 13.04 (x86) from USB alongside Windows 7?

  - by Sumit Chahal

  I have checked the other questions, but none of them match my problem (the ones that do don't have satisfactory answers). I downloaded the Ubuntu 13.04 iso and burned it to my USB device following the given instructions. I was also able to boot the Ubuntu setup from it by changing the boot sequence so that the USB device is now at the top. But I am only able to use the "trial" version of Ubuntu. Every time I tick "Install Ubuntu alongside Windows" and click "Continue", the computer just restarts and I see the same Try-Ubuntu-or-install-it menu. I have tried pressing any key when that little icon appears at the bottom, but it is not at all helpful. I also read somewhere that I should eject my USB device after I click "Continue", but doing so just makes the computer run Windows 7 instead.

  Read the article

• How much to charge for Wordpress installation?

  - by Jack Duluoz

  I know this isn't properly a technical question but I hope this is ok here. The question is simple: how much should I charge a customer for a Wordpress installation & configuration? Configuration simply means I have to install him a theme (which is not provided by me), various plugins and maybe edit some lines of code here and there to make the whole thing work fine. MORE INFO I don't do this for a living, I'm just doing this for this single customer. He told me he wants to customize some features of the blog which I think will require a bit of code editing, but these will be small modifications, because I already told him that more substantial modifications will be billed separately. I don't know exactly how long will this take, but probably just 1 day for the setup and some more days to adapt the blog to the customer requests which will eventually come up later

  Read the article

• Running a startup program in terminal as sudo

  - by Brandon

  I need to run a python script in a terminal, myscript.py at startup (on Lubunt). This script requires root. I've setup a .desktop file that runs the following command: lxterminal --command="python /home/d/Jarvis/alarm.py && /bin/bash" The terminal window opens at startup and runs the script, but then closes when the Python script returns an error (because it's not being run as root). When I change the Exec= to this... lxterminal --command="sudo python /home/d/Jarvis/alarm.py && /bin/bash" ... (prefixing command with 'sudo') which works. However, the terminal opens on startup and displays the [sudo] password for d: \ prompt, requiring me to input my password. I would like the execution of the python script at startup to be completely automatic with no user interaction. How can I accomplish this?

  Read the article

• Tweaks to allows maximum number of users to login to ubuntu server.

  - by nixnotwin

  I use ubuntu server 10.04 on a fairly good machine, with 2.40 duel-core processor and 2GB RAM. My users login with ssh or samba. I have setup LDAP with PAM to sync user accounts between unix and samba. When I allowed about 90 users to login over ssh at once the server refused login for many users. I am using dropbear as ssh server. Even samba logins failed for many users. I need to allow at least 100 users to login at once. Is there anyway to do this?

  Read the article

• Why is my Quickly app full of fail?

  - by bstpierre

  I tried to use quickly on Ubuntu 12.04 to create an application, but it does not behave as described in that linked page. I don't get a popup when creating the application (see error below). % quickly create ubuntu-application foo Creating project directory foo Creating bzr repository and committing Launching your newly created project! (foo:16847): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Congrats, your new project is setup! cd /tmp/foo/ to start hacking. It creates a project, but when I try to run, it crashes and burns: % cd foo % quickly run (foo:22639): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Is this because I'm not using gnome-shell? What can I do to get a working project? (Edit: As a side note, I'd be willing to debug this myself, but I don't even get a traceback. What do I have to do to get quickly to give me a traceback?)

  Read the article

• Will moving to Facebook/Disqus Commenting lighten the load on my server any?

  - by sublet

  I manage a site that gets about 50 million hits a month. It's a Wordpress site, load balanced over 6 servers, and has a varnish caching system setup. Right now, 95 - 97% of the time, page views hit the cache. The only time it serves up a new page from the server is when a new story is created, or someone is logged in looking at the stories and commenting. What I am trying to figure out is that if I move over to Facebook Comments or Disqus commenting, and get rid of the users entirely, will that lighten the load? I would think it would because the only time you would be hitting the server, and not the cache, is when you're logged in - which only the admins would be. I know it's only 2.5 - 3% but I wasn't 100% sure.

  Read the article

• Computer Lab School for Orphans

  - by Brendon

  I am helping out an NGO, called Orphans Found Fund, here in Arusha Tanzania setup a computer lab to teach students about Ubuntu and open source applications. I have installed Ubuntu 10.10 on all the systems. What I'm wondering about is how to tweak the systems so that the kids cannot: Delete or alter system files Alter the system settings Add or remove applications Exceed a time limit (like an Internet Cafe) Also as the administrator I would like to monitor the usage for another system to make sure that abuse of network is not taking place. Any advice is much appreciated. Brendon

  Read the article

• Find visitors to multiple subdomains on single visit with Google Analytics

  - by mrwweb

  I'm working on a site that has quite the backlog of Google Analytics data for their site network. One of our big questions is whether people enter on one site and move to another (and if so, of course, how do these visits differ from single site visits). The hostname report (Audience Network Hostname) shows all the host names and I've setup Advanced Segments to get site-specific data. That all works great, but I'm really having a hard time figuring out how to find visits to multiple sites as defined by visiting more than one subdomain or the root site and one or more subdomains. I do see that other hostnames somehow come through when I apply one of the segments to the host name report. Which I can't say I expected. Is that the best way to see if people are visiting 2+ sites?

  Read the article

• experience: coding on netbooks

  - by pascal

  HI, i want to buy a netbook for doing some stuff in the train. Can someone report how it is to code simple stuff on a netbook? 10/12". I wanted to buy a very cheap one. like 1gb ram 1,6ghz blabla. and run linux on it with apache. i will code with JS/PHP. and as IDE i'll be using notepad++. so nothing big like eclispe or something else. maybe later on eclipse for java, but that doesn't really matter. so first, would this setup work fine on such a netbook and, is it okay for coding? I don't style any homepages on the netbook, I just want to code. would be nice if someone can share his experience in that. thanks :)

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >