Search Results

Search found 31625 results on 1265 pages for 'private network'.

Page 331/1265 | < Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >

• iptables forward rule not working in openwrt

  - by Udit Gupta

  I am trying to apply some iptables forwarding rules in openwrt. Here is my scenario - My server has two cards ath0 and br-lan. br-lan is connected to internet and ath0 to private network. The other m/c in n/w also has ath0 that connects with this server's ath0 and they are able to ping each other. Now, I want other m/c in network to use internet using br-lan of server so I thought of using iptables forwarding rule- Here is what I tried - Server : $ ping 1.1.1.6 // <ath0-ip of client> works fine $ iptables -A FORWARD -i ath0 -o br-lan -j ACCEPT $ /etc/init.d/firewall restart Client : $ ping 1.1.1.5 // <ath0-ip of server> works fine $ ping 132.245.244.60 // <br-lan ip of server> (not working) I am new to iptables stuff and openwrt. What I am doing wrong here ?? Any other help if anyone could suggest for my scenario Edit- m/c - machine n/w - network

  Read the article

• Homework with allocate subnet IP address

  - by Don Lun

  I'm having difficulty solving a subnet allocation homework problem. Assume that a university has an address block 128.205.224.0/19. It has to allocate addresses for 2 departments' networks, each of size 1800, and for 4 offices, of sizes 550, 600, 650, and 750 nodes respectively. Assuming that the university network allocates addresses sequentially from the beginning of the allocated allocated address space, what are the prefix allocations for these subnetworks? I first thought in this way: There should be 6 subnets in the network. So I need 3 bits for the subnets. So 3 + 19 = 22 bits should be the network bits. Then there are only 10 bits left. 2^10 = 1024 < 1800, so this cannot work. Could you guys give me a hint or some thoughts for solving this problem?

  Read the article

• Setting up Windows 2008 with VPN and NAT

  - by Benson

  I have a Windows 2008 box set up with VPN, and that works quite well. NPS is used to validate the VPN clients, who are able to access the private address of the server, once connected. I can't for the life of me get NAT working for the VPN clients, though. I've added NAT as a routing protocol, and set the one on in the VPN address pool as private, and the other as public - but it still won't NAT connections when I add a route through the VPN server's IP on the client side (route add SomeInternetIp IpOfPrivateInterfaceOnServer). I know I can reach the server's private interface (which happens to be 10.2.2.1) with remote desktop client, so I can't think of any issues with the VPN.

  Read the article

• Troubles uploading big pics to Picassa when pics are on NAS

  - by Bascy

  Hi all, I'm working from Vista a laptop on a WLAN, my pictures are all on a shared (samba) network drive on a FreeNAS system, which has a wired network connection to the WLAN router (DLink 655). I'v noticed that when i try to upload pics to picassa, and select files from the network share the pics won't upload successfully. If i first copy them locally (on the laptop) and then upload them to picassa, everything works fine. If i try to copy smaller pics (<500kB) it doesnt go wrong Anybody know what is going wrong here?

  Read the article

• android game performance regarding timers

  - by iQue

  Im new to the game-dev world and I have a tendancy to over-simplify my code, and sometimes this costs me alot fo memory. Im using a custom TimerTask that looks like this: public class Task extends TimerTask { private MainGamePanel panel; public Task(MainGamePanel panel) { this.panel=panel; } /** * When the timer executes, this code is run. */ public void run() { panel.createEnemies(); } } this task calls this method from my view: public void createEnemies() { Bitmap bmp = BitmapFactory.decodeResource(getResources(), R.drawable.female); if(enemyCounter < 24){ enemies.add(new Enemy(bmp, this)); } enemyCounter++; } Since I call this in the onCreate-method instead of in my views contructor (because My enemies need to get width and height of view). Im wondering if this will work when I have multiple levels in game (start a new intent). And if this kind of timer really is the best way to add a delay between the spawning-time of my enemies performance-wise. adding code for my timer if any1 came here cus they dont understand timers: private Timer timer1 = new Timer(); private long delay1 = 5*1000; // 5 sec delay public void surfaceCreated(SurfaceHolder holder) { timer1.schedule(new Task(this), 0, delay1); //I call my timer and add the delay thread.setRunning(true); thread.start(); }

  Read the article

• Intercept method calls in Groovy for automatic type conversion

  - by kerry

  One of the cooler things you can do with groovy is automatic type conversion.  If you want to convert an object to another type, many times all you have to do is invoke the ‘as’ keyword: def letters = 'abcdefghijklmnopqrstuvwxyz' as List But, what if you are wanting to do something a little fancier, like converting a String to a Date? def christmas = '12-25-2010' as Date ERROR org.codehaus.groovy.runtime.typehandling.GroovyCastException: Cannot cast object '12-25-2010' with class java.lang.String' to class 'java.util.Date' No bueno! I want to be able to do custom type conversions so that my application can do a simple String to Date conversion. Enter the metaMethod. You can intercept method calls in Groovy using the following method: def intercept(name, params, closure) { def original = from.metaClass.getMetaMethod(name, params) from.metaClass[name] = { Class clazz -> closure() original.doMethodInvoke(delegate, clazz) } } Using this method, and a little syntactic sugar, we create the following ‘Convert’ class: // Convert.from( String ).to( Date ).using { } class Convert { private from private to private Convert(clazz) { from = clazz } static def from(clazz) { new Convert(clazz) } def to(clazz) { to = clazz return this } def using(closure) { def originalAsType = from.metaClass.getMetaMethod('asType', [] as Class[]) from.metaClass.asType = { Class clazz -> if( clazz == to ) { closure.setProperty('value', delegate) closure(delegate) } else { originalAsType.doMethodInvoke(delegate, clazz) } } } } Now, we can make the following statement to add the automatic date conversion: Convert.from( String ).to( Date ).using { new java.text.SimpleDateFormat('MM-dd-yyyy').parse(value) } def christmas = '12-25-2010' as Date Groovy baby!

  Read the article

• Podcast Show Notes: Architect Day Panel Highlights

  - by Bob Rhubart

  The 2010 series of Oracle Technology Network Architect Day events kicked off in May with events in Dallas, Texas, Redwood Shores, California, and Anaheim, California. The centerpiece of each Architect Day event is a panel discussion that brings together the day's various presenters along with experts drawn from the local Oracle community. This week’s ArchBeat program presents highlights from the panel discussion from the event held in Anaheim. Listen The voices you’ll hear in these highlights belong to (listed in order of appearance): Ralf Dossmann: Director of SOA and Middleware in Oracle’s Enterprise Solutions Group LinkedIn | Oracle Mix Floyd Teter: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Basheer Khan: Innowave Technology, Oracle ACE Director Blog | Twitter | LinkedIn | Oracle Mix | Oracle ACE Profile Jeff Savit:  Oracle virtualization expert, former Sun Microsystems principal engineer Blog | LinkedIn | Oracle Mix Geri Born: Oracle security analyst LinkedIn | A 10-minute podcast can't really do justice to the hour-long panel discussion at each Architect Day event, let alone the discussion that is characteristic of each session throughout each Architect Day. But at least you’ll get a taste of what you’ll find at the live events. You’ll find slide decks and more from this first series of 2010 events in the Architect Day Artifacts post on this blog. More dates/cities will be added soon to the Architect Day schedule.  Coming Soon Next week’s ArchBeat program kicks off a three-part series featuring Cameron Purdy,  Oracle ACE Director Aleksander Seovic, and Oracle ACE John Stouffer in a conversation about data grid technology and Oracle Coherence. Stay tuned: RSS Technorati Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day del.icio.us Tags: oracle,oracle technology network,archbeat,arch2arch,podcast,architect day

  Read the article

• Why does eth0 show an IP if I'm booting into runlevel 1?

  - by banjer

  I'm having some issues with networking on a new Linux server I'm building. The OS is SLES 11. When booting into runlevel 1, I see that eth0 is showing an IP. Physically, there is a network cable plugged into the card associated with eth1, and then there is a network cable plugged into a QLogic iSCSI card (eth4, not shown). I've been troubleshooting this for awhile, and it seems like eth0 is somehow getting assigned an IP, even though it isn't configured in Linux or even plugged into the network for that matter. Thoughts? ifconfig -a Here is the ifconfig output (Sorry, I need more rep before I can post images on SF...)

  Read the article

• vSphere ESX 5.5 hosts cannot connect to NFS Server

  - by Gerald

  Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

  Read the article

• Shared Folders in VirtualBox on Windows 7

  In my adventures with VirtualBox, my latest victory was in figuring out how to share folders between my host OS (Windows 7) and my virtual OS (Windows Server 2008).  Im familiar with VirtualPC and other such products, which allow you to share local folders with the VM.  When you do, they just show up in Windows Explorer and all is good.  However, after configuring shared folders in VirtualBox like so:   I couldnt see them anywhere within the machine. Where are Shared Folders in a VirtualBox VM? Fortunately a bit of searching yielded this article, which describes the problem nicely.  It turns out that there is a magic word you have to know, and that is the share name for the host OS: \\vboxsrv Once you know this, mapping shared folders is straightforward.  From Windows Explorer, click on the Map network drive option, and then map a drive to \\vboxsrv\YOURSHAREDFOLDER Like so: With that, its easy to share folders between the client and host OS using VirtualBox.  The reason I didnt simply use a standard network share to my host OS machine name is that both guest and host are in a VPN, and the VPN is over the Internet and in a different country, so when I went that route my files were (apparently) traveling from host to guest by way of the remote VPN network, rather than locally.  Using the Shared Folders feature dramatically sped up my ability to transfer files between Host and Guest machines. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• acessing a subnetwork from within a vm

  - by yan bellavance

  I have a pc running windows 7. I have vmwareplayer running RHEL5 I have 1 physical ethernet connection. this ethernet connection is wired to a hub. there is another device on that hub that needs to be in a certain subnetwork (192.168.0.xxx)(lets call him device X) but the general network is 192.168.1.xxx How can I configure the network adapters so that I can ping device X from RHEL5 in the vm. Originally I could ping google from both windows and rhel (I was in the .1 network) but not device X since he is on a different subnetwork address. Now that I have put it on the .0 I can ping device X from windows but not from rhel5 and cannot access the web. I did this by manually setting the IP address.

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

• ASP.NET ViewState Tips and Tricks #1

  - by João Angelo

  In User Controls or Custom Controls DO NOT use ViewState to store non public properties. Persisting non public properties in ViewState results in loss of functionality if the Page hosting the controls has ViewState disabled since it can no longer reset values of non public properties on page load. Example: public class ExampleControl : WebControl { private const string PublicViewStateKey = "Example_Public"; private const string NonPublicViewStateKey = "Example_NonPublic"; // DO public int Public { get { object o = this.ViewState[PublicViewStateKey]; if (o == null) return default(int); return (int)o; } set { this.ViewState[PublicViewStateKey] = value; } } // DO NOT private int NonPublic { get { object o = this.ViewState[NonPublicViewStateKey]; if (o == null) return default(int); return (int)o; } set { this.ViewState[NonPublicViewStateKey] = value; } } } // Page with ViewState disabled public partial class ExamplePage : Page { protected override void OnLoad(EventArgs e) { base.OnLoad(e); this.Example.Public = 10; // Restore Public value this.Example.NonPublic = 20; // Compile Error! } }

  Read the article

• Virtual Box Networking; How to configure bridged networking on Windows 7

  - by Krist van Besien

  I have VirtualBox on Windows 7. I have two virtual machines running RHEL, that work fine when the network is set to NAT. However I want to change the network adapters for the VM's to bridged in stead of NAT. However when I go in to the VM configuration, and select bridged I also need to select an adapter, but there is nothing to select. Apparently I need to install a separate driver/filter on the network adapter. However I don't know where to start. I reinstalled VirtualBox (latest version) but did not see an option to install such driver. What should I do?

  Read the article

• How does flocking algorithm work?

  - by Chan

  I read and understand the basic of flocking algorithm. Basically, we need to have 3 behaviors: 1. Cohesion 2. Separation 3. Alignment From my understanding, it's like a state machine. Every time we do an update (then draw), we check all the constraints on both three behaviors. And each behavior returns a Vector3 which is the "correct" orientation that an object should transform to. So my initial idea was /// <summary> /// Objects stick together /// </summary> /// <returns></returns> private Vector3 Cohesion() { Vector3 result = new Vector3(0.0f, 0.0f, 0.0f); return result; } /// <summary> /// Object align /// </summary> /// <returns></returns> private Vector3 Align() { Vector3 result = new Vector3(0.0f, 0.0f, 0.0f); return result; } /// <summary> /// Object separates from each others /// </summary> /// <returns></returns> private Vector3 Separate() { Vector3 result = new Vector3(0.0f, 0.0f, 0.0f); return result; } Then I search online for pseudocode but many of them involve velocity and acceleration plus other stuffs. This part confused me. In my game, all objects move at constant speed, and they have one leader. So can anyone share me an idea how to start on implement this flocking algorithm? Also, did I understand it correctly? (I'm using XNA 4.0)

  Read the article

• What are the challenges when my enterprise desires to move the processing component of an applicatio

  - by Berkay

  Assume that i have an enterprise accounting application that consists of a front-end interface, a processing tier, and a back-end database. This is an application that contains private business data, and thus is traditionally run in a secure private network environment within the enterprise. What are the challenges that appear when my enterprise desires to move the processing component of this application to a cloud computing data center in order to achieve greater scalability or to reduce IT costs ? Pls note: do i have to make significant changes to my own infrastructure to enable external access to formerly private resources? do i have to modify the application code to handle new network topology ? thanks, if you give your answers in a simple manner, really appreciated.

  Read the article

• Cannot Access a Shared Folder Using Windows 2008

  - by peter

  Hi All, I have a NAS drive, and this is sharing some folders. I cannot access those folders from a windows 2008 machine which is on the network. The are both connected to the same network switch. e.g. if I go like this, \\server\ or \\server\folder I get the message 'windows cannot access \\server check the spelling, click diagnose' etc. Error code: 0x80004005 The thing is that I can connect to this shared drive from a windows 7 laptop connected wirelessly to the same network. I can ping the server from windows 2008, but only if I use the IP address, not the server name.

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

  - by user900749

  I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

  Read the article

• Hyper-V virtual machine unable to get IP address from DHCP server running on same physical box

  - by Bronumski

  We have a Windows server 2008 R2 with two network cards running AD, DHCP, DNS and Hyper-V The first nic is setup with a static IP address and DHCP, WDS, and DNS are bound to it. The second nic is configured in Hyper-V to be only used by Hyper-V and has been automatically configured so that only the virtual switch is enabled on the adapter. DHCP and DNS work fine for all physical machines on the network. It also works for Virtual Machines running on another physical box. Virtual machines that are bound to the virtual switch network adapter are unable to get a IP address. If the virtual machine is given a static IP address with correct subnet, gateway and dns everything works. Has anyone else got this working?

  Read the article

• How can I permanently remove default root hints from a Server 2008 DNS server?

  - by TonyD

  My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

  Read the article

• VirtualBox - Mac OSX host Win7 guest - no Internet access for guest VM

  - by nodelayheehoo

  I have a Mac running OSX 10.9.2, and I just downloaded and installed a Win7 IE9 VM in VirtualBox. My Mac uses Wi-Fi for internet access, and it's behind a proxy (it's a work machine). VirtualBox loads the VM fine, and at some point the VM can see the DNS servers of the host. But I've never been able to make the VM have internet access. I've tried all kinds of combinations of Network settings on the VM via the VirtualBox Settings, in conjunction with Internet Sharing in OSX's System Preferences, but no luck. Has anyone done a similar setup and made the VM successfully connect to the Internet? Thanks in advance for any inputs. [ Update: I was able to get internet access for the VM when the host was using my home network. When I ran the VPN software to connect to the work network, the internet access went away again.] (Initially posted this on stackoverflow.com, but it was put on hold as off-topic by several users, and was advised to ask here instead)

  Read the article

• WolframAlpha Can Now Do In-depth Analysis of Your Facebook Account

  - by Jason Fitzpatrick

  If you’re a big fan of WolframAlpha’s ability to crunch the numbers on just about anything–and we certainly are–you’ll likely be just as delighted as we were to watch it massage the data from your Facebook account. Find out your most liked, discussed, and shared posts, see your Facebook habits, and other neat trends. I unleashed it on my account this morning, not sure what to expect from the results. Within the results tabulation WolframAlpha provided me with all sorts of neat data break downs. I now know exactly how many days it is to my next birthday, the composition of my aggregate posting habits (how many posts are status updates, links, or photos), the time of day when I do the most posting (and what the composition of those posts is), and my average post length. I also know my most liked post and my most commented on post. It will even crunch the numbers on your network of friends (60.6% of my friends are married, for example). By far one of the more interesting data analysis it does on the friendship data, however, is organizing all your friends into relationship clusters so you can see who in your Facebook network is friends with other people in your Facebook network. The service from WolframAlpha is free: simply visit the WolframAlpha search portal and type in “Facebook report” to start the process. You’ll be prompted to create a WolframAlpha account if you don’t have one and to authorize the WolframAlpha Facebook app to access your data. Your Facebook data is cached to your WolframAlpha account for one hour in order to crunch the numbers and display the results. WolframAlpha HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

  Read the article

• Windows Server 2008 Active Directory DNS setup

  - by Mister IT Guru

  I have to setup a small windows network inside my bigger linux/mac infrastructure. In order to get the windows clients logging onto the domain, I have had to make the DC their primary DNS server, which seems to have worked. I would much prefer to have one DNS server running on my network, or at least one authoritative server running on the network. I have a USG 200 router/firewall and I can configure some static records for DNS, but I an not sure what I need to put in order to get DNS and AD working together, and hints and tips appreciated.

  Read the article

• Setting up 802.1X wireless connection on OSX

  - by hizki

  I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort. I am trying to connect to my university's wireless network, but it has a complex security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my MAC? Thank you. P.S. I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password.

  Read the article

< Previous Page | 327 328 329 330 331 332 333 334 335 336 337 338  | Next Page >