Search Results

Search found 19949 results on 798 pages for 'print css'.

Page 332/798 | < Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >

  • How can I check if Python´s ConfigParser has a section or not?

    - by Voidcode
    How can I check if the ConfigParser mainfile has a section or not, And if it don´t then add a new section to it? I am trying with this code: import ConfigParser config = ConfigParser.ConfigParser() #if the config file don´t has the section 'globel', then add it to the config-file if not config.has_section("globel"): config.add_section("globel") config.set("globel", "settings", "someting") config.write(open("/tmp/myfile.conf", "w")) print "The new sestion globel is now added!!" #else just return the the value of globle->settings else: config.read("/tmp/myfile.conf") print "else... globle->settings == "+config.get("globel", "settings")

    Read the article

  • Python PyBluez loses Bluetooth connection after a while

    - by Travis G.
    I am using Python to write a simple serial Bluetooth script that sends information about my computer stats periodically. The receiving device is a Sparkfun BlueSmirf Silver. The problem is that, after the script runs for a few minutes, it stops sending packets to the receiver and fails with the error: (11, 'Resource temporarily unavailable') Noticing that this inevitably happens, I added some code to automatically try to reopen the connection. However, then I get: Could not connect: (16, 'Device or resource busy') Am I doing something wrong with the connection? Do I need to occasionally reopen the socket? I'm not sure how to recover from this type of error. I understand that sometimes the port will be busy and a write operation is deferred to avoid blocking other processes, but I wouldn't expect the connection to fail so regularly. Any thoughts? Here is the script: import psutil import serial import string import time import bluetooth sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' #gauges = serial.Serial() #gauges.port = '/dev/rfcomm0' #gauges.baudrate = 9600 #gauges.parity = 'N' #gauges.writeTimeout = 0 #gauges.open() filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) def connect(): while(True): try: gaugeSocket = bluetooth.BluetoothSocket(bluetooth.RFCOMM) gaugeSocket.connect(('00:06:66:42:22:96', 1)) break; except bluetooth.btcommon.BluetoothError as error: print "Could not connect: ", error, "; Retrying in 5s..." time.sleep(5) return gaugeSocket; gaugeSocket = connect() while(1): usage = psutil.cpu_percent(interval=sampleTime) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) try: #gauges.write(USAGE_CHAR) gaugeSocket.send(USAGE_CHAR) #gauges.write(chr(int(usage))) #write the first byte gaugeSocket.send(chr(int(usage))) #print("Wrote usage: " + str(int(usage))) #gauges.write(TEMP_CHAR) gaugeSocket.send(TEMP_CHAR) #gauges.write(chr(temp)) gaugeSocket.send(chr(temp)) #print("Wrote temp: " + str(temp)) except bluetooth.btcommon.BluetoothError as error: print "Caught BluetoothError: ", error time.sleep(5) gaugeSocket = connect() pass gaugeSocket.close() EDIT: I should add that this code connects fine after I power-cycle the receiver and start the script. However, it fails after the first exception until I restart the receiver. P.S. This is related to my recent question, Why is /dev/rfcomm0 giving PySerial problems?, but that was more about PySerial specifically with rfcomm0. Here I am asking about general rfcomm etiquette.

    Read the article

  • Make the Firefox Awesome Bar Semi-Transparent Like Google Chrome

    - by Matthew Guay
    Would you like to make the Firefox Awesome Bar drop-down menu semi-transparent like in Google Chrome?  Here’s a quick trick that can make your Firefox Awesome Bar a bit more awesome. When you type an address or search query into the address bar in Google Chrome, the drop-down list of history and search suggestions that appears is slightly transparent.  Nothing extreme, but it adds a nice touch. Firefox’s Awesome bar, on the other hand, is fully opaque by default. We can change that with a simple change.  Exit Firefox, then open your Firefox profile folder by entering the following in the address bar in Explorer or in the Run command: %appdata%\Mozilla\Firefox\Profiles\ Open the default folder, and then open the Chrome folder in it. Now, open the userChrome.css file in an editor such as Notepad.  If you do not have a userChrome.css file, open the userChrome-example.css file instead. Now, add the following to the end of the file: #PopupAutoCompleteRichResult[type="autocomplete-richlistbox"]{    opacity: 0.9 !important;} You can change the opacity value, but 0.9 seemed the closest to Chrome’s transparency while keeping the text readable. Save the file as userChrome.css in that same folder.  If you’re editing with Notepad, make sure to select to save as All Files so the file won’t be saved with a .txt extension. Open Firefox, and now your Awesome Bar’s drop-down list will be transparent.  Actually, it may look even more awesome than Google Chrome’s address bar! Conclusion With this simple trick, you can make your Firefox Awesome bar a bit more awesome.  With tweaks like this, it’s no wonder Firefox is still so popular. Special thanks to Daniel Spiewak for the tip! Similar Articles Productive Geek Tips Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeHow to Make Google Chrome Your Default BrowserEnable Vista Black Style Theme for Google Chrome in XPMake your Gnome Terminal Background (mostly)Transparent on UbuntuStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule

    Read the article

  • Problems sending and receiving data between php and perl?

    - by Chip Gà Con
    I have a problem in sending and receiving data between php and perl socket: -Problem: +php can not send all byte data to perl socket +Perl socket can not receiving all data from php . Here code php: function save(){ unset($_SESSION['info']); unset($_SESSION['data']); global $config,$ip; $start=$_POST['config']; $fp = fsockopen($_SESSION['ip'], $config['port'], $errno, $errstr, 30); if(!$fp) { $_SESSION['info']="Not connect "; transfer("Not connect".$ip, "index.php?com=server&act=info"); } else { $_SESSION['info']="Save config - ".$ip; fwrite($fp,$start); transfer("Sending data to ".$ip, "index.php?com=server&act=info"); } } Here code perl socket: #!/usr/bin/perl use strict; use warnings; use Carp; use POSIX qw( setsid ); use IO::Socket; $| = 1; my $socket = new IO::Socket::INET ( LocalHost => '192.168.150.3', LocalPort => '5000', Proto => 'tcp', Listen => 5, Reuse => 1 ); die "Coudn't open socket" unless $socket; print "\nTCPServer Waiting for client on port 5000"; my $client_socket = ""; while ($client_socket = $socket->accept()) { my $recieved_data =" "; my $send_data=" "; my $peer_address = $client_socket->peerhost(); my $peer_port = $client_socket->peerport(); print "\n I got a connection from ( $peer_address , $peer_port ) "; print "\n SEND( TYPE q or Q to Quit):"; $client_socket->recv($recieved_data,20000); #while (defined($recieved_data = <$client_socket>)) { if ( $recieved_data eq 'q' or $recieved_data eq 'Q' ) { close $client_socket; last; } elsif ($recieved_data eq 'start' or $recieved_data eq 'START' ) { $send_data = `/etc/init.d/squid start`; } elsif ($recieved_data eq 'restart' or $recieved_data eq 'RESTART' ) { $send_data = `/etc/init.d/squid restart`; } elsif ($recieved_data eq 'stop' or $recieved_data eq 'STOP' ) { $send_data = `/etc/init.d/squid stop`; } elsif ($recieved_data eq 'hostname' or $recieved_data eq 'HOSTNAME' ) { $send_data= `hostname`; } elsif ($recieved_data eq 'view-config' or $recieved_data eq 'VIEW-CONFIG' ) { $send_data = `cat /etc/squid/squid.conf` ; } else { # print $recieved_data; open OUTPUT_FILE, '> /root/data' or die("can not open file"); print OUTPUT_FILE $recieved_data; close OUTPUT_FILE } #} if ($send_data eq 'q' or $send_data eq 'Q') { $client_socket->send ($send_data); close $client_socket; last; } else { $client_socket->send($send_data); } }

    Read the article

  • Cutting Paper through Visualization and Collaboration

    - by [email protected]
    It's hard not to hear about "Going Green" these days. Many are working to be more environmentally conscious in their personal lives, and this has extended to the corporate world as well. I know I'm always looking for new ways. Environmental responsibility is important at Oracle too, and we have an entire section of our website dedicated to our solutions around the Eco-Enterprise. You can check it out here: http://www.oracle.com/green/index.html Perhaps the biggest and most obvious challenge in the world of business is the fact that we use so much paper. There are many good reasons why we print today too. For example: Printing off a document, spreadsheet, or CAD design that will be reviewed and marked up while on a plane Having a printout of a facility when a field engineer performs on-site maintenance During a multi-party design review where a number of people will review a drawing in a meeting room, scribbling onto a large scale drawing print to provide their collaborative comments These are just a few potential use cases, and they're valid ones. However, there's a way in which you can turn these paper processes into digital ones. AutoVue allows you to view, mark-up, and collaborate on all the data you would print. Indeed, this is the core of what AutoVue does. So if we take the examples above, we could address each as follows: Allow you to view the document, spreadsheet, or CAD drawing in AutoVue on your laptop. Even if you originally had this data vaulted in some time of system of record (like an ECM solution) and view your data from there, AutoVue allows you to "Work Offline" and take the documents you need to review on your laptop. From there, the many annotation tools in AutoVue will give you what you need to comment upon the documents that you are reviewing. The challenge with the mobile workforce is always access to information. People who perform maintenance and repair operations often are in locations with little to no Internet connectivity. However, technology is coming to these people in the form of laptops, tablet PCs, and other portable devices too. AutoVue can address situations with limited bandwidth through our streaming technology for viewing, meaning that the most up to date information can be pulled up from the central server - without the need for large data transfer. When there is no connectivity at all, the "Work Offline" option will handle this. For a design review session, the Real-Time Collaboration capabilities of AutoVue will let all the participants view the same document in a synchronized view, allowing each person to be able to mark-up the document at the same time. Since this is done in a web-based manner, not only is it not necessary to print the document, but you benefit by reducing the travel needed for these sessions. Not only are trees spared, but jet fuel as well. There are many steps involved with "Going Green", but each step is a necessary one. What we do today will directly influence our future generations, and we're looking to help.

    Read the article

  • ASP.NET MVC 4: Short syntax for script and style bundling

    - by DigiMortal
    ASP.NET MVC 4 introduces new methods for style and scripts bundling. I found something brilliant there I want to introduce you. In this posting I will show you how easy it is to include whole folder with stylesheets or JavaScripts to your page. I’m using ASP.NET MVC 4 Internet Site template for this example. When we open layout pages located in shared views folder we can see something like this in layout file header: <link href="@System.Web.Optimization.BundleTable.Bundles.ResolveBundleUrl("~/Content/css")" rel="stylesheet" type="text/css" />    <link href="@System.Web.Optimization.BundleTable.Bundles.ResolveBundleUrl("~/Content/themes/base/css")" rel="stylesheet" type="text/css" />    <script src="@System.Web.Optimization.BundleTable.Bundles.ResolveBundleUrl("~/Scripts/js")"></script> Let’s take the last line and modify it so it looks like this: <script src="/Scripts/js"></script> After saving the layout page let’s run browser and see what is coming in over network. As you can see the request to folder ended up with result code 200 which means that request was successful. 327.2KB was received and it is not mark-up size for error page or directory index. Here is the body of response: I scrolled down to point where one script ends and another one starts when I made the screenshot above. All scripts delivered with ASP.NET MVC project templates start with this green note. So now we can be sure that the request to scripts folder ended up with bundled script and not with something else. Conclusion Script and styles bundling uses currently by default long syntax where bundling is done through Bundling class. We can still avoid those long lines and use extremely short syntax for script and styles bundling – we just write usual script or link tag and give folder URL as source. ASP.NET MVC 4 is smart enough to combine styles or scripts when request like this comes in.

    Read the article

  • Second Edition of Regular Expressions Cookbook Has Been Published

    - by Jan Goyvaerts
    %COOKBOOKFRAME% The first edition of Regular Expressions Cookbook was published in May of 2009. It quickly became a bestseller, briefly holding the #1 spot in computer books on Amazon.com. It also had staying power. The ebook version was O’Reilly’s top seller during the whole year of 2010. So it’s no surprise that our editor at O’Reilly soon contacted us for a second edition. With Steven and I always being very busy, those plans were delayed until finally both of us found the time to update the book. Work started in January. Today you can buy your own copy of the second edition of Regular Expressions Cookbook. O’Reilly’s online shop sells the eBook in DRM-free ePub, Mobi, and PDF formats for $39.99 and the print version for $49.99. These are the list prices for the eBook and the print book. If you’re looking for a discount and free shipping of the print book, you can pre-order on one of the various Amazon sites. Deliveries should start soon. The discount rates differ and are subject to change. Amazon will also pay me an affiliate commission if you use one of these links, which pretty much doubles the income I get from the book. Amazon.com. Free shipping to the USA. Amazon.co.uk. Free shipping to the UK and Ireland. Amazon.fr. Free shipping to France, Monaco, Luxembourg, and Belgium. Amazon.de. Free shipping to Germany, Austria, Switzerland, Luxembourg, Liechtenstein, Belgium, and The Netherlands. If you don’t want to wait for the print book to arrive, the Kindle edition is already available for instant delivery. The Kindle edition works on Amazon’s Kindle hardware, and on PCs via Amazon’s Kindle software (free download). Amazon.com Amazon.co.uk Amazon.fr Amazon.de I’ll blog more about the book in the coming days and weeks with details about what’s new in the second edition.

    Read the article

  • Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

    - by Weston C
    I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

    Read the article

  • "Page Size" and "Orientation" are disabled when printing from some applications

    - by Michael
    There are many different Print dialogs but one is very common and is used by Gimp, Shutter, Evloution and Simple Scan. In all these apps the "Page Size" and "Orientation" are disabled. The same dialog in Firefox, Thunderbird and GEdit works OK. I program in Gambas3 which uses this dialog in conjunction with the GTK+ library and it also has these options disabled. If I use the QT4 library then a different print dialog is displayed with no problems. Anybody else notice this problem and found a solution?

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

  • Action delegate in C#

    - by Jalpesh P. Vadgama
    In last few posts about I have written lots of things about delegates and this post is also part of that series. In this post we are going to learn about Action delegates in C#.  Following is a list of post related to delegates. Delegates in C#. Multicast Delegates in C#. Func Delegates in C#. Action Delegates in c#: As per MSDN action delegates used to pass a method as parameter without explicitly declaring custom delegates. Action Delegates are used to encapsulate method that does not have return value. C# 4.0 Action delegates have following different variants like following. It can take up to 16 parameters. Action – It will be no parameter and does not return any value. Action(T) Action(T1,T2) Action(T1,T2,T3) Action(T1,T2,T3,T4) Action(T1,T2,T3,T4,T5) Action(T1,T2,T3,T4,T5,T6) Action(T1,T2,T3,T4,T5,T6,T7) Action(T1,T2,T3,T4,T5,T6,T7,T8) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13,T14) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13,T14,T15) Action(T1,T2,T3,T4,T5,T6,T7,T8,T9,T10,T11,T12,T13,T14,T15,T16) So for this Action delegate you can have up to 16 parameters for Action.  Sound interesting!!… Enough theory now. It’s time to implement real code. Following is a code for that. using System; using System.Collections.Generic; namespace DelegateExample { class Program { static void Main(string[] args) { Action<String> Print = p => Console.WriteLine(p); Action<String,String> PrintAnother = (p1,p2)=> Console.WriteLine(string.Format("{0} {1}",p1,p2)); Print("Hello"); PrintAnother("Hello","World"); } } } In the above code you can see that I have created two Action delegate Print and PrintAnother. Print have one string parameter and its printing that. While PrintAnother have two string parameter and printing both the strings via Console.Writeline. Now it’s time to run example and following is the output as expected. That’s it. Hope you liked it. Stay tuned for more updates!!

    Read the article

  • Cooking with Wessty: WordPress and HTML 5

    - by David Wesst
    WordPress is easily one, if not the most, popular blogging platforms on the web. With the release of WordPress 3.x, the potential for what you can do with this open source software is limitless. This technique intends to show you how to get your WordPress wielding the power of the future web, that being HTML 5. --- Ingredients WordPress 3.x Your favourite HTML 5 compliant browser (e.g. Internet Explorer 9) Directions Setup WordPress on your server or host. Note: You can setup a WordPress.com account, but you will require an paid add-on to really take advantage of this technique.Login to the administration panel. Login to the administration section of your blog, using your web browser.  On the left side of the page, click the Appearance heading. Then, click on Themes. At the top of the page, select the Install Themes tab. In the search box, type the “toolbox” and click search. In the search results, you should see an theme called Toolbox. Click the Install link in the Toolbox item. A dialog window should appear with a sample picture of what the theme looks like. Click on the Install Now button in the bottom right corner. Et voila! Once the installation is done, you are done and ready to bring your blog into the future of the web. Try previewing your blog in HTML 5 by clicking the preview link.   Now, you are probably thinking “Man…HTML 5 looks like junk”. To that, I respond: “HTML was never why your site looked good in the first place. It was the CSS.” Now you have an un-stylized theme that uses HTML 5 elements throughout your WordPress site. If you want to learn how to apply CSS to your WordPress blog, you should check out the WordPress codex that pretty much covers everything there is to cover about WordPress development. Now, remember how we noted earlier that your free WordPress.com account wouldn’t take advantage of this technique? That is because, as of the time of this writing, you needed to pay a fee to use custom CSS. Remember now, this only gives you the foundation to create your own HTML 5 WordPress site. There are some HTML 5 themes out there that already look good, and were built using this as the foundation and added some CSS 3 to really spice it up. Looking forward to seeing more HTML 5 WordPress sites! Enjoy developing the future of the web. Resources Toolbox Theme JustCSS Theme WordPress Installation Tutorial WordPress Theme Development Tutorial This post also appears at http://david.wes.st

    Read the article

  • Why is my class worse than the hierarchy of classes in the book (beginner OOP)?

    - by aditya menon
    I am reading this book. The author is trying to model a lesson in a college. The goal is to output the Lesson Type (Lecture or Seminar), and the Charges for the lesson depending on whether it is a hourly or fixed price lesson. So the output should be: lesson charge 20. Charge type: hourly rate. lesson type seminar. lesson charge 30. Charge type: fixed rate. lesson type lecture. When the input is as follows: $lessons[] = new Lesson('hourly rate', 4, 'seminar'); $lessons[] = new Lesson('fixed rate', null, 'lecture'); I wrote this: class Lesson { private $chargeType; private $duration; private $lessonType; public function __construct($chargeType, $duration, $lessonType) { $this->chargeType = $chargeType; $this->duration = $duration; $this->lessonType = $lessonType; } public function getChargeType() { return $this->getChargeType; } public function getLessonType() { return $this->getLessonType; } public function cost() { if($this->chargeType == 'fixed rate') { return "30"; } else { return $this->duration * 5; } } } $lessons[] = new Lesson('hourly rate', 4, 'seminar'); $lessons[] = new Lesson('fixed rate', null, 'lecture'); foreach($lessons as $lesson) { print "lesson charge {$lesson->cost()}."; print " Charge type: {$lesson->getChargeType()}."; print " lesson type {$lesson->getLessonType()}."; print "<br />"; } But according to the book, I am wrong (I am pretty sure I am, too). The author gave a large hierarchy of classes as the solution instead. In a previous chapter, the author stated the following 'four signposts' as the time when I should consider changing my class structure: Code Duplication The Class Who Knew Too Much About His Context The Jack of All Trades - Classes that try to do many things Conditional Statements The only problem I can see is Conditional Statements, and that too in a vague manner - so why refactor this? What problems do you think might arise in the future that I have not foreseen?

    Read the article

  • Looping in Python and keeping current line after sub routine [migrated]

    - by Brendan
    I've been trying to nut out an issue when looping in python 3. When returning from sub routine the "line" variable has not incremented. How do I get the script to return the latest readline from the subsroutine? Code below def getData(line): #print(line) #while line in sTSDP_data: while "/service/content/test" not in line: line = sTSDP_data.readline() import os, sys sFileTSDP = "d:/ess/redo/Test.log" sTSDP_data = open(sFileTSDP, "r") for line in sTSDP_data: if "MOBITV" in line: getData(line) #call sub routine print(line)

    Read the article

  • New free DotNetNuke 7.0 Skin

    - by Chris Hammond
    With the pending release of DotNetNuke 7, scheduled for this week, I updated my free DotNetNuke (DNN) skin , MultiFunction v1.3 . This latest release requires DotNetNuke 7, it shouldn’t install on an earlier version of DNN. This release updates a number of the CSS classes for DNN 7 specific styles and objects. Overall the design of the skin doesn’t really change much, just cleans up CSS mainly for this release. I also updated to the 3.0 version of the Orangebox jQuery plugin, you can find the code...(read more)

    Read the article

  • Problem running the python code for backup on Ubuntu?

    - by Akash
    I was trying to run following python code through terminal but something is wrong as it is producing some errors source = ['/home/akash/', '/home/akash/code'] target_dir = '/media' target = target_dir + os.sep + time.strftime('%Y%m%d%H%M%S') + '.zip' zip_command = "zip -qr {0} {1}".format(target, ' '.join(source)) if os.system(zip_command) == 0: print('Successful backup to', target) else: print('Backup FAILED') but when i try to run it following error appears zip I/O error: Permission denied zip error: Could not create output file (/media/20131019083404.zip) Backup FAILED

    Read the article

  • Fixing a NoClassDefFoundError

    - by Chris Okyen
    I have some code: package ftc; import java.util.Scanner; public class Fer_To_Cel { public static void main(String[] argv) { // Scanner object to get the temp in degrees Farenheit Scanner keyboard = new Scanner(System.in); boolean isInt = true; // temporarily put as true in case the user enters a valid int the first time int degreesF = 0; // initialy set to 0 do { try { // Input the temperature text. System.out.print("\nPlease enter a temperature (integer number, no fractional part) in degrees Farenheit: "); degreesF = Integer.parseInt(keyboard.next()); // Get user input and Assign the far. temperature variable, which is casted from String to int. } // Let the user know in a user friendly notice that the value entered wasnt an int ( give int value range ) , and then give error log catch(java.lang.Exception e) { System.out.println("Sorry but you entered a non-int value ( needs to be between ( including ) -2,147,483,648 and 2,147,483,647 ).. \n"); e.printStackTrace(); isInt = false; } } while(!isInt); System.out.println(""); // print a new line. final int degreesC = (5*(degreesF-32)/9); // convert the degrees from F to C and store the resulting expression in degreesC // Print out a newline, then print what X degrees F is in Celcius. System.out.println("\n" + degreesF + " degrees Farenheit is " + degreesC + " degrees Celcius"); } } And The following error: C:\Program Files\Java\jdk1.7.0_06\bin>java Fer_To_Cel Exception in thread "main" java.lang.NoClassDefFoundError: Fer_To_Cel (wrong name: ftc/Fer_To_Cel) at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:791) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:14 at java.net.URLClassLoader.defineClass(URLClassLoader.java:449) at java.net.URLClassLoader.access$100(URLClassLoader.java:71) at java.net.URLClassLoader$1.run(URLClassLoader.java:361) at java.net.URLClassLoader$1.run(URLClassLoader.java:355) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:354) at java.lang.ClassLoader.loadClass(ClassLoader.java:423) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:356) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:480) The code compiled without compile errors, but presented errors during execution. Which leads me to two questions. I know Errors can be termed Compiler, Runtime and Logic Errors, but the NoClassDefFoundError inherits java.lang.LinkageError. Does that make it a Linker error, being niether of the three types of errors I listed, If I am right this is the answer. For someone else who obtains the singular .java file and compiles it, would this be the only way to solve this problem? Or can I (should I ) do/have done something to fix this problem? Basically, based on a basis of programming, is this a fault of me as the writer? Could this be done once on, my half and be distributed and not needed be done again?

    Read the article

  • Strange Flash AS3 xml Socket behavior

    - by Rnd_d
    I have a problem which I can't understand. To understand it I wrote a socket client on AS3 and a server on python/twisted, you can see the code of both applications below. Let's launch two clients at the same time, arrange them so that you can see both windows and press connection button in both windows. Then press and hold any button. What I'm expecting: Client with pressed button sends a message "some data" to the server, then the server sends this message to all the clients(including the original sender) . Then each client moves right the button 'connectButton' and prints a message to the log with time in the following format: "min:secs:milliseconds". What is going wrong: The motion is smooth in the client that sends the message, but in all other clients the motion is jerky. This happens because messages to those clients arrive later than to the original sending client. And if we have three clients (let's name them A,B,C) and we send a message from A, the sending time log of B and C will be the same. Why other clients recieve this messages later than the original sender? By the way, on ubuntu 10.04/chrome all the motion is smooth. Two clients are launched in separated chromes. windows screenshot Can't post linux screenshot, need more than 10 reputation to post more hyperlinks. Listing of log, four clients simultaneously: [16:29:33.280858] 62.140.224.1 >> some data [16:29:33.280912] 87.249.9.98 << some data [16:29:33.280970] 87.249.9.98 << some data [16:29:33.281025] 87.249.9.98 << some data [16:29:33.281079] 62.140.224.1 << some data [16:29:33.323267] 62.140.224.1 >> some data [16:29:33.323326] 87.249.9.98 << some data [16:29:33.323386] 87.249.9.98 << some data [16:29:33.323440] 87.249.9.98 << some data [16:29:33.323493] 62.140.224.1 << some data [16:29:34.123435] 62.140.224.1 >> some data [16:29:34.123525] 87.249.9.98 << some data [16:29:34.123593] 87.249.9.98 << some data [16:29:34.123648] 87.249.9.98 << some data [16:29:34.123702] 62.140.224.1 << some data AS3 client code package { import adobe.utils.CustomActions; import flash.display.Sprite; import flash.events.DataEvent; import flash.events.Event; import flash.events.IOErrorEvent; import flash.events.KeyboardEvent; import flash.events.MouseEvent; import flash.events.SecurityErrorEvent; import flash.net.XMLSocket; import flash.system.Security; import flash.text.TextField; public class Main extends Sprite { private var socket :XMLSocket; private var textField :TextField = new TextField; private var connectButton :TextField = new TextField; public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(event:Event = null):void { socket = new XMLSocket(); socket.addEventListener(Event.CONNECT, connectHandler); socket.addEventListener(DataEvent.DATA, dataHandler); stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler); addChild(textField); textField.y = 50; textField.width = 780; textField.height = 500; textField.border = true; connectButton.selectable = false; connectButton.border = true; connectButton.addEventListener(MouseEvent.MOUSE_DOWN, connectMouseDownHandler); connectButton.width = 105; connectButton.height = 20; connectButton.text = "click here to connect"; addChild(connectButton); } private function connectHandler(event:Event):void { textField.appendText("Connect\n"); textField.appendText("Press and hold any key\n"); } private function dataHandler(event:DataEvent):void { var now:Date = new Date(); textField.appendText(event.data + " time = " + now.getMinutes() + ":" + now.getSeconds() + ":" + now.getMilliseconds() + "\n"); connectButton.x += 2; } private function keyDownHandler(event:KeyboardEvent):void { socket.send("some data"); } private function connectMouseDownHandler(event:MouseEvent):void { var connectAddress:String = "ep1c.org"; var connectPort:Number = 13250; Security.loadPolicyFile("xmlsocket://" + connectAddress + ":" + String(connectPort)); socket.connect(connectAddress, connectPort); } } } Python server code from twisted.internet import reactor from twisted.internet.protocol import ServerFactory from twisted.protocols.basic import LineOnlyReceiver import datetime class EchoProtocol(LineOnlyReceiver): ##### name = "" id = 0 delimiter = chr(0) ##### def getName(self): return self.transport.getPeer().host def connectionMade(self): self.id = self.factory.getNextId() print "New connection from %s - id:%s" % (self.getName(), self.id) self.factory.clientProtocols[self.id] = self def connectionLost(self, reason): print "Lost connection from "+ self.getName() del self.factory.clientProtocols[self.id] self.factory.sendMessageToAllClients(self.getName() + " has disconnected.") def lineReceived(self, line): print "[%s] %s >> %s" % (datetime.datetime.now().time(), self, line) if line=="<policy-file-request/>": data = """<?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd"> <!-- Policy file for xmlsocket://ep1c.org --> <cross-domain-policy> <allow-access-from domain="*" to-ports="%s" /> </cross-domain-policy>""" % PORT self.send(data) else: self.factory.sendMessageToAllClients( line ) def send(self, line): print "[%s] %s << %s" % (datetime.datetime.now().time(), self, line) if line: self.transport.write( str(line) + chr(0)) else: print "Nothing to send" def __str__(self): return self.getName() class ChatProtocolFactory(ServerFactory): protocol = EchoProtocol def __init__(self): self.clientProtocols = {} self.nextId = 0 def getNextId(self): id = self.nextId self.nextId += 1 return id def sendMessageToAllClients(self, msg): for client in self.clientProtocols: self.clientProtocols[client].send(msg) def sendMessageToClient(self, id, msg): self.clientProtocols[id].send(msg) PORT = 13250 print "Starting Server" factory = ChatProtocolFactory() reactor.listenTCP(PORT, factory) reactor.run()

    Read the article

  • Windows 8 App Wish List

    - by Tim Murphy
    As I have been using Windows 8 more some of them apps that come with the system have been missing some features that I would like to see.  So Microsoft, here is my wish list for some new features. Skydrive Copy files from one folder to another in Skydrive Get public and read only URLs of a file   OneNote MX Print a page   Mail Accept/Reject appointments Sort inbox Search inbox (use the search charm) Print email   Store Keyword search (use the search charm)   del.icio.us Tags: Windows 8

    Read the article

  • SafariBooks: Oracle BI 11g Developer's Guide

    - by user554629
    Oracle Business Intelligence 11g Developer’s Guide By: Rittman Mark Publisher: McGraw-Hill Pub. Date: October 11, 2012 Print ISBN-13: 978-0-07-179874-7 E-Book ISBN-13: 978-0-07-179875-4 Pages in Print Edition: 1088 http://techbus.safaribooksonline.com/book/-/9780071798747 

    Read the article

  • samsung printer SCX 5737FW on Ubuntu 11.10

    - by Pepe
    can anyone please help? I am trying to install samsung printer SCX 5737FW on Ubuntu 11.10, but when I plug in the usb cable it tries to look for the driver, but can't find it. Indeed the webpage http://www.samsung.com/uk/consumer/print-solutions/print-solutions/mono-multi-function-products/SCX-5737FW/SEE-spec tells me that the printer is supported up to Ubuntu 10. This true because it installs perfectly on my other machine with ubuntu 9. Can anyone help please? Thanks

    Read the article

  • Rails /tmp/cache/assets permissions issue using Debian virtual machine hosted on OS X Lion

    - by Jim
    I am running Parallels Desktop 7 on OS X Lion. I have a VM with Debian installed, and inside that VM I setup a Rails development environment. I am using Parallels Tools to share out my OS X home directory to the VM - the goal here is to run the Rails server on the VM, but host the files on OS X (so they are automatically backed up, and so I can use tools like Textmate to develop with). Everything seems to work with the shared directory - my Debian user can read, write, and execute files. However, when I cloned a recent Rails project from Git, I got an error message when it tried to compile the CSS assets. My symptoms are exactly the same as in the question: http://stackoverflow.com/questions/7556774/rails-sprocket-error-compiling-css-assest-chown-issue I believe this is permissions-based, but it is really weird. My entire Rails project directory has permissions set to 777 and my Debian user owns it. If I navigate into /tmp/cache/assets, those permissions are the same. However, the three-character directories Rails is creating (DCE, DA1, D05, etc...) are being created without write permissions! If I refresh the Rails page a few times, about 4 or 5 (with Rails creating new three-character directories every time), eventually it will create one of the directories with the proper 777 permissions and everything will work! This will persist until I make a change to the CSS files and it has to recompile. Does anyone have any idea what might be going on here? I can't fathom why it is creating temp directories with incorrect permissions, or why after a few refreshes the good permissions kick in and it works... It definitely seems to be an issue with the share, since if I move the project into a different directory on the VM, it seems to work fine. On the OS X side, I've given the shared folder 777 permissions as well, but no dice...any ideas? Update I've found that the number of times I need to refresh before it works is not random - it has to do with how many assets are being compiled. For example, if I edit one of my CSS files, and there are four CSS files in the app/assets/stylesheets directory, I have to refresh four times before the app will finally work without the operation not permitted error...

    Read the article

  • Restructuring a large Chrome Extension/WebApp

    - by A.M.K
    I have a very complex Chrome Extension that has gotten too large to maintain in its current format. I'd like to restructure it, but I'm 15 and this is the first webapp or extension of it's type I've built so I have no idea how to do it. TL;DR: I have a large/complex webapp I'd like to restructure and I don't know how to do it. Should I follow my current restructure plan (below)? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? While it isn't relevant to the question, the actual code is on Github and the extension is on the webstore. The basic structure is as follows: index.html <html> <head> <link href="css/style.css" rel="stylesheet" /> <!-- This holds the main app styles --> <link href="css/widgets.css" rel="stylesheet" /> <!-- And this one holds widget styles --> </head> <body class="unloaded"> <!-- Low-level base elements are "hardcoded" here, the unloaded class is used for transitions and is removed on load. i.e: --> <div class="tab-container" tabindex="-1"> <!-- Tab nav --> </div> <!-- Templates for all parts of the application and widgets are stored as elements here. I plan on changing these to <script> elements during the restructure since <template>'s need valid HTML. --> <template id="template.toolbar"> <!-- Template content --> </template> <!-- Templates end --> <!-- Plugins --> <script type="text/javascript" src="js/plugins.js"></script> <!-- This contains the code for all widgets, I plan on moving this online and downloading as necessary soon. --> <script type="text/javascript" src="js/widgets.js"></script> <!-- This contains the main application JS. --> <script type="text/javascript" src="js/script.js"></script> </body> </html> widgets.js (initLog || (window.initLog = [])).push([new Date().getTime(), "A log is kept during page load so performance can be analyzed and errors pinpointed"]); // Widgets are stored in an object and extended (with jQuery, but I'll probably switch to underscore if using Backbone) as necessary var Widgets = { 1: { // Widget ID, this is set here so widgets can be retreived by ID id: 1, // Widget ID again, this is used after the widget object is duplicated and detached size: 3, // Default size, medium in this case order: 1, // Order shown in "store" name: "Weather", // Widget name interval: 300000, // Refresh interval nicename: "weather", // HTML and JS safe widget name sizes: ["tiny", "small", "medium"], // Available widget sizes desc: "Short widget description", settings: [ { // Widget setting specifications stored as an array of objects. These are used to dynamically generate widget setting popups. type: "list", nicename: "location", label: "Location(s)", placeholder: "Enter a location and press Enter" } ], config: { // Widget settings as stored in the tabs object (see script.js for storage information) size: "medium", location: ["San Francisco, CA"] }, data: {}, // Cached widget data stored locally, this lets it work offline customFunc: function(cb) {}, // Widgets can optionally define custom functions in any part of their object refresh: function() {}, // This fetches data from the web and caches it locally in data, then calls render. It gets called after the page is loaded for faster loads render: function() {} // This renders the widget only using information from data, it's called on page load. } }; script.js (initLog || (window.initLog = [])).push([new Date().getTime(), "These are also at the end of every file"]); // Plugins, extends and globals go here. i.e. Number.prototype.pad = .... var iChrome = function(refresh) { // The main iChrome init, called with refresh when refreshing to not re-run libs iChrome.Status.log("Starting page generation"); // From now on iChrome.Status.log is defined, it's used in place of the initLog iChrome.CSS(); // Dynamically generate CSS based on settings iChrome.Tabs(); // This takes the tabs stored in the storage (see fetching below) and renders all columns and widgets as necessary iChrome.Status.log("Tabs rendered"); // These will be omitted further along in this excerpt, but they're used everywhere // Checks for justInstalled => show getting started are run here /* The main init runs the bare minimum required to display the page, this sets all non-visible or instantly need things (such as widget dragging) on a timeout */ iChrome.deferredTimeout = setTimeout(function() { iChrome.deferred(refresh); // Pass refresh along, see above }, 200); }; iChrome.deferred = function(refresh) {}; // This calls modules one after the next in the appropriate order to finish rendering the page iChrome.Search = function() {}; // Modules have a base init function and are camel-cased and capitalized iChrome.Search.submit = function(val) {}; // Methods within modules are camel-cased and not capitalized /* Extension storage is async and fetched at the beginning of plugins.js, it's then stored in a variable that iChrome.Storage processes. The fetcher checks to see if processStorage is defined, if it is it gets called, otherwise settings are left in iChromeConfig */ var processStorage = function() { iChrome.Storage(function() { iChrome.Templates(); // Templates are read from their elements and held in a cache iChrome(); // Init is called }); }; if (typeof iChromeConfig == "object") { processStorage(); } Objectives of the restructure Memory usage: Chrome apparently has a memory leak in extensions, they're trying to fix it but memory still keeps on getting increased every time the page is loaded. The app also uses a lot on its own. Code readability: At this point I can't follow what's being called in the code. While rewriting the code I plan on properly commenting everything. Module interdependence: Right now modules call each other a lot, AFAIK that's not good at all since any change you make to one module could affect countless others. Fault tolerance: There's very little fault tolerance or error handling right now. If a widget is causing the rest of the page to stop rendering the user should at least be able to remove it. Speed is currently not an issue and I'd like to keep it that way. How I think I should do it The restructure should be done using Backbone.js and events that call modules (i.e. on storage.loaded = init). Modules should each go in their own file, I'm thinking there should be a set of core files that all modules can rely on and call directly and everything else should be event based. Widget structure should be kept largely the same, but maybe they should also be split into their own files. AFAIK you can't load all templates in a folder, therefore they need to stay inline. Grunt should be used to merge all modules, plugins and widgets into one file. Templates should also all be precompiled. Question: Should I follow my current restructure plan? Does that sound like a good starting point, or is there a different approach that I'm missing? Should I not do any of the things I listed? Do applications written with Backbone tend to be more intensive (memory and speed) than ones written in Vanilla JS? Also, can I expect to improve this with a proper restructure or is my current code about as good as can be expected?

    Read the article

  • A name was started with an invalid character. Error processing resource

    - by Gallen
    Here is the exact error I'm getting when I try to launch my default.aspx file from the published folder. Can anybody point me in the right direction? The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. -------------------------------------------------------------------------------- A name was started with an invalid character. Error processing resource 'file:///C:/inetpub/wwwroot/MHNProServices/Default.... <%@ Page Title="" Language="C#" MasterPageFile="~/ProServices.Master" AutoEventWireup="true" CodeBehind="Default.aspx.cs"... Here are the contents of default.aspx <%@ Page Title="" Language="C#" MasterPageFile="~/ProServices.Master" AutoEventWireup="False" CodeBehind="Default.aspx.cs" Inherits="MHNProServices.Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server"> <link type="text/css" href="css/Default.css" rel="Stylesheet" /> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <div id="contentHead"> <img src="css/img/heading_landing.jpg" /> </div> <div id="contentTop"></div> <div id="content"> <div id="contentLeft"> <asp:Image ID="displayPicture" runat="server" /> <img id="displayOverlay"src="css/img/profilepicture_overlay.gif" /> <a id="contentButton_makeAppointment" href="Appointments.aspx?step=start"></a> <a id="contentButton_cancelAppointment" href="Appointments.aspx?step=cancel"></a> </div> <div id="contentRight"> <h3><asp:Label ID="lbl_homepageHeader" runat="server" Text=""></asp:Label></h3> <hr /> <asp:Label ID="lbl_homepageContent" runat="server" Text=""></asp:Label> </div> </div> <div id="contentBottom"></div> </asp:Content>

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10 oneiric

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

< Previous Page | 328 329 330 331 332 333 334 335 336 337 338 339  | Next Page >