Search Results

Search found 10033 results on 402 pages for 'fuzz testing'.

Page 333/402 | < Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >

• Efficient Clojure workflow?

  - by Alex B

  I am developing a pet project with Clojure, but wonder if I can speed up my workflow a bit. My current workflow (with Compojure) is: Start Swank with lein swank. Go to Emacs, connect with M-x slime-connect. Load all existing source files one by one. This also starts a Jetty server and an application. Write some code in REPL. When satisfied with experiments, write a full version of a construct I had in mind. Eval (C-c C-c) it. Switch REPL to namespace where this construct resides and test it. Switch to browser and reload browser tab with the affected page. Tweak the code, eval it, check in the browser. Repeat any of the above. There are a number of annoyances with it: I have to switch between Emacs and the browser (or browsers if I am testing things like templating with multiple browsers) all the time. Is there a common idiom to automate this? I used to have a JavaScript bit that reloads the page continuously, but it's of limited utility, obviously, when I have to interact with the page for more than a few seconds. My JVM instance becomes "dirty" when I experiment and write test functions. Basically namespaces become polluted, especially if I'm refactoring and moving the functions between namespaces. This can lead to symbol collisions and I need to restart Swank. Can I undef a symbol? I load all source files one by one (C-c C-k) upon restarting Swank. I suspect I'm doing it all wrong. Switching between the REPL and the file editor can be a bit irritating, especially when I have a lot of Emacs tabs open, alongside the browser(s). I'm looking for ways to improve the above points and the entire workflow in general, so I'd appreciate if you'd share yours. P. S. I have also used Vimclojure before, so Vimclojure-based workflows are welcome too.

  Read the article

• Managing multiple customer databases in ASP.NET MVC application

  - by Robert Harvey

  I am building an application that requires separate SQL Server databases for each customer. To achieve this, I need to be able to create a new customer folder, put a copy of a prototype database in the folder, change the name of the database, and attach it as a new "database instance" to SQL Server. The prototype database contains all of the required table, field and index definitions, but no data records. I will be using SMO to manage attaching, detaching and renaming the databases. In the process of creating the prototype database, I tried attaching a copy of the database (companion .MDF, .LDF pair) to SQL Server, using Sql Server Management Studio, and discovered that SSMS expects the database to reside in c:\program files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\MyDatabaseName.MDF Is this a "feature" of SQL Server? Is there a way to manage individual databases in separate directories? Or am I going to have to put all of the customer databases in the same directory? (I was hoping for a little better control than this). NOTE: I am currently using SQL Server Express, but for testing purposes only. The production database will be SQL Server 2008, Enterprise version. So "User Instances" are not an option.

  Read the article

• Strange build issue using Flex Mojo. Looking for troubleshooting suggestions.

  - by WeeJavaDude

  I have ran into a strange issue and I was hoping for some suggeestion on how to attack the problem. Here is the environment. 1) We develop locally using Flex Builder. 2) We use QuickBuild with FlexMojo 3.4.2 for test builds and production 3) In both cases we don't believe optimization is enabled. What we are seeing is some strange behavior relating to the Ctrl-Enter key when doing testing on IE only in our test environment but not locally. By copying some files over locally I have narrowed the issue down to swf files differences. We do see a difference in the size of swf files in our test environment vs our local environments. Couple things that would help me in troubleshooting would be. 1) Is there a way to know what exactly is in the SWF file? What SWCs are included. 2) How does one compare compile settings between a maven mojo configuration and Flex IDE envioronment? Any thoughts or opinions would be very helpful.

  Read the article

• Why doesn't my test run tearDownAfterTestClass when it fails

  - by Memor-X

  in a test i am writing the setUpBeforeTests creates a new customer in the database who is then used to perform the tests with so naturally when i finish the test i should get rid of this test customer in tearDownAfterTestClass so that i can create then anew when i rerun the test and not get any false positives how when the tests all run fine i have no problem but if a test fails and i go to rerun it my setUpBeforeTests fails because i check for mysql errors in it like this try { if(!mysqli_query($connection,$query)) { $this->assertTrue(false); } } catch (Exception $exc) { $msg = '[tearDownAfterTestClass] Exception Error' . PHP_EOL . PHP_EOL; $msg .= 'Could not run query - '.mysqli_error($connection). PHP_EOL;; $this->fail($msg); } the error i get is that there is a primary key violation which is expected cause i'm trying to create a new customer using the same data (primary key is on email which is also used to log in) however that means when the test failed it didn't run tearDownAfterTestClass now i could just move everything in tearDownAfterTestClass to the start of setUpBeforeTests however to me that seems like bad programming since it defeates the purpose of even have tearDownAfterTestClass so i am wondering, why isn't my tearDownAfterTestClass running when a test fails NOTE: the database is a fundamental part of the system i'm testing and the database and system are on a separate development environment not the live one, the backup files for the database are almost 2 GBs and takes almost 1/2 an hour to restore, the purpose of the tear down is to remove any data we have added because of the test so that we don't have to restore the database every time we run the tests

  Read the article

• ~1 second TcpListener Pending()/AcceptTcpClient() lag

  - by cpf

  Probably just watch this video: http://screencast.com/t/OWE1OWVkO As you see, the delay between a connection being initiated (via telnet or firefox) and my program first getting word of it. Here's the code that waits for the connection public IDLServer(System.Net.IPAddress addr,int port) { Listener = new TcpListener(addr, port); Listener.Server.NoDelay = true;//I added this just for testing, it has no impact Listener.Start(); ConnectionThread = new Thread(ConnectionListener); ConnectionThread.Start(); } private void ConnectionListener() { while (Running) { while (Listener.Pending() == false) { System.Threading.Thread.Sleep(1); }//this is the part with the lag Console.WriteLine("Client available");//from this point on everything runs perfectly fast TcpClient cl = Listener.AcceptTcpClient(); Thread proct = new Thread(new ParameterizedThreadStart(InstanceHandler)); proct.Start(cl); } } (I was having some trouble getting the code into a code block) I've tried a couple different things, could it be I'm using TcpClient/Listener instead of a raw Socket object? It's not a mandatory TCP overhead I know, and I've tried running everything in the same thread, etc.

  Read the article

• Is it possible to replace values ina queryset before sending it to your template?

  - by Issy

  Hi Guys, Wondering if it's possible to change a value returned from a queryset before sending it off to the template. Say for example you have a bunch of records Date | Time | Description 10/05/2010 | 13:30 | Testing... etc... However, based on the day of the week the time may change. However this is static. For example on a monday the time is ALWAYS 15:00. Now you could add another table to configure special cases but to me it seems overkill, as this is a rule. How would you replace that value before sending it to the template? I thought about using the new if tags (if day=1), but this is more of business logic rather then presentation. Tested this in a custom template tag def render(self, context): result = self.model._default_manager.filter(from_date__lte=self.now).filter(to_date__gte=self.now) if self.day == 4: result = result.exclude(type__exact=2).order_by('time') else: result = result.order_by('type') result[0].time = '23:23:23' context[self.varname] = result return '' However it still displays the results from the DB, is this some how related to 'lazy' evaluation of templates? Thanks! Update Responding to comments below: It's not stored wrong in the DB, its stored Correctly However there is a small side case where the value needs to change. So for example I have a From Date & To date, my query checks if todays date is between those. Now with this they could setup a from date - to date for an entire year, and the special cases (like mondays as an example) is taken care off. However if you want to store in the DB you would have to capture several more records to cater for the side case. I.e you would be capturing the same information just to cater for that 1 day when the time changes. (And the time always changes on the same day, and is always the same)

  Read the article

• VirtualBox limits size of .js file, that can be included from guest additions folder?

  - by c69

  This question might belong to SuperUser, but i'll try to ask it here anyway, because i believe, some web developers might encountered this weird behavior. When testing a site for IE8/winXP compatibility on VirtualBox i run into weird issue of $ is undefined, which is caused by jQuery (and jQuery UI) being not included, when referenced by relative path, which resolves to file:/// url. Seemingly because their size was too big (above 200KB). Simply replacing links to those 2 big files to http:// ones solved the issue for me. But here is the question: why did this happen ? is it a misconfiguration ? a bug ? a known design decision ? Details: VirtualBox 4.1.8 host os: win7 64bit, guest os: xp sp3 32 bit guest additions installed, page was launched from VB shared folder the bug was manifesting itself in all browsers (even in opera, which ignores ie security settings, afaik) ie configuration is default script was included like this: <script type="text/javascript" src="js/libs/jquery/jquery-1.7.2.js"> exact size limit was not deducted.

  Read the article

• Looping through an List to select an Element in Selenium

  - by ChrisMcLellan

  I'm attempting to write a Page Class for Links within the Header of the website I'm testing. I have the following link structure below <ul> <li><a href="/" title="Home">Home</a></li> <li><a href="/AboutUs" title="About Us">About Us</a> </li> <li><a href="/Account" title="Account">Account</a></li> <li><a href="/Account/Orders" title="Orders">Orders</a></li> <li><a href="/AdministrationPortal" title="Administration Portal">Administration Portal</a></li> </ul> What I want to do is store these into a List, then when a user select one of the links, it will take then to the page they should go to. I have started with the following code below List<IWebElement> headerElements = new List<IWebElement>(); headerElements.Add(WebDriver.FindElement(By.LinkText("Home"))); headerElements.Add(WebDriver.FindElement(By.LinkText("About Us"))); headerElements.Add(WebDriver.FindElement(By.LinkText("Account"))); headerElements.Add(WebDriver.FindElement(By.LinkText("Orders"))); headerElements.Add(WebDriver.FindElement(By.LinkText("Administration Portal"))); headerElements.Add(WebDriver.FindElement(By.LinkText("Log in / Register"))); headerElements.Add(WebDriver.FindElement(By.LinkText("Log off"))); I was thinking for using a for loop to do this, would this be the best way. I'm trying to avoid writting methods like the one below for each link public void SelectCreateNewReferralLink() { var selectAboutUsLink = ( new WebDriverWait(WebDriver, new TimeSpan(50))).Until (ExpectedConditions.ElementExists(By.CssSelector("#main > a:nth-of-type(1)"))); selectCreateNewReferralLink.Click(); } I'm using C#, with WebDriver attempting to write this Any Help would be great Thanks Chris

  Read the article

• Fastest inline-assembly spinlock

  - by sigvardsen

  I'm writing a multithreaded application in c++, where performance is critical. I need to use a lot of locking while copying small structures between threads, for this I have chosen to use spinlocks. I have done some research and speed testing on this and I found that most implementations are roughly equally fast: Microsofts CRITICAL_SECTION, with SpinCount set to 1000, scores about 140 time units Implementing this algorithm with Microsofts InterlockedCompareExchange scores about 95 time units Ive also tried to use some inline assembly with __asm {} using something like this code and it scores about 70 time units, but I am not sure that a proper memory barrier has been created. Edit: The times given here are the time it takes for 2 threads to lock and unlock the spinlock 1,000,000 times. I know this isn't a lot of difference but as a spinlock is a heavily used object, one would think that programmers would have agreed on the fastest possible way to make a spinlock. Googling it leads to many different approaches however. I would think this aforementioned method would be the fastest if implemented using inline assembly and using the instruction CMPXCHG8B instead of comparing 32bit registers. Furthermore memory barriers must be taken into account, this could be done by LOCK CMPXHG8B (I think?), which guarantees "exclusive rights" to the shared memory between cores. At last [some suggests] that for busy waits should be accompanied by NOP:REP that would enable Hyper-threading processors to switch to another thread, but I am not sure whether this is true or not? From my performance-test of different spinlocks, it is seen that there is not much difference, but for purely academic purpose I would like to know which one is fastest. However as I have extremely limited experience in the assembly-language and with memory barriers, I would be happy if someone could write the assembly code for the last example I provided with LOCK CMPXCHG8B and proper memory barriers in the following template: __asm { spin_lock: ;locking code. spin_unlock: ;unlocking code. }

  Read the article

• Overlapping 2 Flash objects and controlling z-index

  - by Magnus Smith

  I have two Flash objects on a webpage (call them A and B), and they overlap so one partially obscures the other. I don't seem to have any control over the z-index, to force B in front of A. Whatever I try, A always 'wins' and stays on the top! I have read many people's posts about problem with getting HTML to show over the top of Flash...but nothing about when your two overlapping items are both Flash objects. I have tried various combinations of wmode=opaque/transparent/window I have tried CSS position:absolute/relative and z-index:0/999 I have tried placing the HTML sections in a different order The problem is the same in IE6 and Firefox 2.0 I do not want to use jQuery in this case In my particular situation B must have position:absolute and wmode=transparent, and sit above A. A needs relative positioning and transparency is not required. However, I have been testing without these restrictions, and I still have no control over the overlap. Are some SWFs (ours are adverts sent by clients) created in such a way as to override any code control of z-index? Thanks for any advice you can give.

  Read the article

• [jscript] Good (better) substition for setInterval or setTimeout

  - by riffnl

  I've got a masterpage with some nice UI (jQuery) features. One of these options is interefering with my embedded YouTube (or other alike-) objects. On each, in this case, setInterval event the embedded video stops displaying new frames (for like a second). More detail: I've got a "polaroid" gallery (in the header) with only 5 100x100 images in it (test: preloading has no effect on performance) and my gallery will show or hide them (fade-in / fade-out) after a period of time. (test: non-animated display:hide or display:block has no effect on performance). After some testing and I've come to the conclusion that it isn't the "animated" showing or hiding of the pictures, but it's the interval itself (- since altering to display:hide or block had the same result). Perhaps it is my "gallery" "function" on itself ... function poladroid() { if (!galleryHasFocus) { if (galleryMax >= 0) { galleryCurrent++; if (galleryCurrent > galleryMax) { galleryCurrent = 0; showPictures = !showPictures; } if (showPictures) { $('#pic-' + galleryCurrent.toString()).show("slow"); } else { $('#pic-' + galleryCurrent.toString()).hide("slow"); } } } if (!intervalSet) { window.setInterval("poladroid()", 3000); intervalSet = true; } } It's not like my function is doing really awkward stuff is it? So, I was thinking I needed a more "loose" interval function.. but is there an option for it?

  Read the article

• How to parse phpDoc style comment block with php?

  - by Reveller

  Please consider the following code with which I'm trying to parse only the first phpDoc style comment (noy using any other libraries) in a file (file contents put in $data variable for testing purposes): $data = " /** * @file A lot of info about this file * Could even continue on the next line * @author [email protected] * @version 2010-05-01 * @todo do stuff... */ /** * Comment bij functie bar() * @param Array met dingen */ function bar($baz) { echo $baz; } "; $data = trim(preg_replace('/\r?\n *\* */', ' ', $data)); preg_match_all('/@([a-z]+)\s+(.*?)\s*(?=$|@[a-z]+\s)/s', $data, $matches); $info = array_combine($matches[1], $matches[2]); print_r($info) This almose works, except for the fact that everything after @todo (including the bar() comment block and code) is considered the value of @todo: Array ( [file] => A lot of info about this file Could even continue on the next line [author] => [email protected] [version] => 2010-05-01 [todo] => do stuff... / /** Comment bij functie bar() [param] => Array met dingen / function bar() { echo ; } ) How does my code need to be altered so that only the first comment block is being parsed (in other words: parsing should stop after the first "*/" encountered?

  Read the article

• Moving from a non-clustered PK to a clustered PK in SQL 2005

  - by adaptr

  HI all, I recently asked this question in another thread, and thought I would reproduce it here with my solution: What if I have an auto-increment INT as my non-clustered primary key, and there are about 15 foreign keys defined to it ? (snide comment about original designer being braindead in the original :) ) This is a 15M row table, on a live database, SQL Standard, so dropping indexes is out of the question. Even temporarily dropping the foreign key constraints will be difficult. I'm curious if anybody has a solution that causes minimal downtime. I tested this in our testing environment and finally found that the downtime wasn't as severe as I had originally feared. I ended up writing a script that drops all FK constraints, then drops the non-clustered key, re-creates the PK as a clustered index, and finally re-created all FKs WITH NOCHECK to avoid trawling through all FKs to check constraint compliance. Then I just enable the CHECK constraints to enable constraint checking from that point onwards, and all is dandy :) The most important thing to realize is that during the time the FKs are absent, there MUST NOT be any INSERTs or DELETEs on the parent table, as this may break the constraints and cause issues in the future. The total time taken for clustering a 15M row, 800MB index was ~4 minutes :)

  Read the article

• What would be different in Java if Enum declaration didn't have the recursive part

  - by atamur

  Please see http://stackoverflow.com/questions/211143/java-enum-definition and http://stackoverflow.com/questions/3061759/why-in-java-enum-is-declared-as-enume-extends-enume for general discussion. Here I would like to learn what exactly would be broken (not typesafe anymore, or requiring additional casts etc) if Enum class was defined as public class Enum<E extends Enum> I'm using this code for testing my ideas: interface MyComparable<T> { int myCompare(T o); } class MyEnum<E extends MyEnum> implements MyComparable<E> { public int myCompare(E o) { return -1; } } class FirstEnum extends MyEnum<FirstEnum> {} class SecondEnum extends MyEnum<SecondEnum> {} With it I wasn't able to find any benefits in this exact case. PS. the fact that I'm not allowed to do class ThirdEnum extends MyEnum<SecondEnum> {} when MyEnum is defined with recursion is a) not relevant, because with real enums you are not allowed to do that just because you can't extend enum yourself b) not true - pls try it in a compiler and see that it in fact is able to compile w/o any errors PPS. I'm more and more inclined to believe that the correct answer here would be "nothing would change if you remove the recursive part" - but I just can't believe that.

  Read the article

• When and why can sprintf fail?

  - by Srekel

  I'm using swprintf to build a string into a buffer (using a loop among other things). const int MaxStringLengthPerCharacter = 10 + 1; wchar_t* pTmp = pBuffer; for ( size_t i = 0; i < nNumPlayers ; ++i) { const int nPlayerId = GetPlayer(i); const int nWritten = swprintf(pTmp, MaxStringLengthPerCharacter, TEXT("%d,"), nPlayerId); assert(nWritten >= 0 ); pTmp += nWritten; } *pTaskPlayers = '\0'; If during testing the assert never hits, can I be sure that it will never hit in live code? That is, do I need to check if nWritten < 0 and handle that, or can I safely assume that there won't be a problem? Under which circumstances can it return -1? The documentation more or less just states "If the function fails". In one place I've read that it will fail if it can't match the arguments (i.e. the formatting string to the varargs) but that doesn't worry me. I'm also not worried about buffer overrun in this case - I know the buffer is big enough.

  Read the article

• What is your favorite API developer community site? And why? [closed]

  - by whatupwilly

  There are a lot of great sites out there that offer good documentation, tools, tips, best-practices, sample code, etc. for the API's they are publishing. A sample: http://apiwiki.twitter.com http://developer.netflix.com/ http://developers.facebook.com/ https://affiliate-program.amazon.com/gp/advertising/api/detail/main.html http://code.google.com/ http://remix.bestbuy.com/ http://www.flickr.com/services/api/misc.overview.html http://products.wolframalpha.com/api/webserviceapi.html There are some no-brainers that I think a good developer site should have: Hi level introduction Quick start guide API specific details - showing example request and responses Links to sample code and/or 3rd party libraries Developer registration (e.g. get an API key) Blog But what about some other things: Online-Forum or Msg Board vs. Google Group (or similar) Galleries/ShowCases - spotlighting great apps built on the API - who has done nice galleries? Community Wiki - How do people feel about letting the community have edit rights on API documentation pages Online testing tools (like Facebook has a lot of nice interactive tools to simulate request/responses) What are some packages that you would recommend to put this all together: pbwiki Google Group pages MediaWiki API vendor package such as Sonoa Systems that offers a customizable developer portal So, to summarize: What are some other great API developer portals out there What are some nice features you like on them Any recommendations on what to use to build these features out Thanks, Will Zappos.com Public API (soon to launch) Product Manager

  Read the article

• AudioRecord problems with non-HTC devices

  - by Marc

  I'm having troubles using AudioRecord. An example using some of the code derived from the splmeter project: private static final int FREQUENCY = 8000; private static final int CHANNEL = AudioFormat.CHANNEL_CONFIGURATION_MONO; private static final int ENCODING = AudioFormat.ENCODING_PCM_16BIT; private int BUFFSIZE = 50; private AudioRecord recordInstance = null; ... android.os.Process.setThreadPriority(android.os.Process.THREAD_PRIORITY_URGENT_AUDIO); recordInstance = new AudioRecord(MediaRecorder.AudioSource.MIC, FREQUENCY, CHANNEL, ENCODING, 8000); recordInstance.startRecording(); short[] tempBuffer = new short[BUFFSIZE]; int retval = 0; while (this.isRunning) { for (int i = 0; i < BUFFSIZE - 1; i++) { tempBuffer[i] = 0; } retval = recordInstance.read(tempBuffer, 0, BUFFSIZE); ... // process the data } This works on the HTC Dream and the HTC Magic perfectly without any log warnings/errors, but causes problems on the emulators and Nexus One device. On the Nexus one, it simply never returns useful data. I cannot provide any other useful information as I'm having a remote friend do the testing. On the emulators (Android 1.5, 2.1 and 2.2), I get weird errors from the AudioFlinger and Buffer overflows with the AudioRecordThread. I also get a major slowdown in UI responsiveness (even though the recording takes place in a separate thread than the UI). Is there something apparent that I'm doing incorrectly? Do I have to do anything special for the Nexus One hardware?

  Read the article

• rspec and ruby 1.9.1: problem with dummy controller and routes

  - by giorgian

  I want to test a module that basically executes some verify statements, to ensure that actions are invoked with the correct method. # /lib/rest_verification.rb module RestVerification def self.included(base) # :nodoc: base.extend(ClassMethods) end module ClassMethods def verify_rest_actions verify :method => :post, :only => [:create], :redirect_to => { :action => :new } ... end end end I tried this: describe RestVerification do class FooController < ActionController::Base include RestVerification verify_rest_actions def new ; end def index ; end def create ; end def edit ; end def update ; end def destroy ; end end # controller_name 'foo' # this only works with ruby 1.8.7 : 1.9.1 says "uninitialized constant FooController" tests FooController # this works with both before(:each) do ActionController::Routing::Routes.draw do |map| map.resources :foo end end after(:each) do ActionController::Routing::Routes.reload! end it ':create should redirect to :new if invoked with wrong verb' do [:get, :put, :delete].each do |verb| send verb, :create response.should redirect_to(new_foo_url) end end ... end When testing: $ ruby -v ruby 1.8.7 (2010-01-10 patchlevel 249) [i486-linux] $ rake RestVerification :create should redirect to :new if invoked with wrong verb Finished in 0.175586 seconds $ rvm use 1.9.1 Using ruby 1.9.1 p378 $ rake RestVerification :create should redirect to :new if invoked with wrong verb (FAILED - 1) 1) 'RestVerification :create should redirect to :new if invoked with wrong verb' FAILED expected redirect to "http://test.host/foo/new", got redirect to "http://test.host/spec/rails/example/controller_example_group/subclass_1/foo/new" Is this a known issue? Is there a workaround?

  Read the article

• select failing with C program but not shell

  - by Gary

  So I have a parent and child process, and the parent can read output from the child and send to the input of the child. So far, everything has been working fine with shell scripts, testing commands which input and output data. I just tested with a simple C program and couldn't get it to work. Here's the C program: #include <stdio.h> int main( void ) { char stuff[80]; printf("Enter some stuff:\n"); scanf("%s", stuff); return 0; } The problem with with the C program is that my select fails to read from the child fd and hence the program cannot finish. Here's the bit that does the select.. //wait till child is ready fd_set set; struct timeval timeout; FD_ZERO( &set ); // initialize fd set FD_SET( PARENT_READ, &set ); // add child in to set timeout.tv_sec = 3; timeout.tv_usec = 0; int r = select(FD_SETSIZE, &set, NULL, NULL, &timeout); if( r < 1 ) { // we didn't get any input exit(1); } Does anyone have any idea why this would happen with the C program and not a shell one? Thanks!

  Read the article

• Third party multipart request in playframework

  - by Brian

  I'm making an application to post photos to yfrog and twitpic and I am having a little trouble figuring out how to set the parameters. Here is my code: public static Result index() { HttpClient httpclient = new DefaultHttpClient(); WSRequestHolder holder = WS.url("http://api.twitpic.com/2/upload.json"); holder.setHeader("Authorization", ""); return async(holder.post("").map(new Function<WS.Response, Result>() { public Result apply(WS.Response response) { return ok(response.getBody()); } })); } Now, I don't expect this to actually get an ok response from the server, as I am just testing the responses that I get back from the server, and that is one that says I need to provide the api key. I figured as much, but I'm not sure of the syntax for providing that parameter, as I need to also give the name of the file and the file. I tried setting holder.post("key=somekey"), with the hope that I would get a different error message (like the key you provided is invalid) but I just get the same error. I'm assuming that I probably need to send it in the for of a multipart request, but I am not very experienced with this kind of request and can't find any play documentation on how to create a multipart request, other than in an html form. Any suggestions and help will be much appreciated. And fyi, I do know that there are yfrog and twitpic java classes to handle this kind of stuff, but I want to do it myself, more so for learning how to do this kind of stuff. Thanks in advance!

  Read the article

• Collision of dot and line in 2D space

  - by Anderiel

  So i'm trying to make my first game on android. The thing is i have a small moving ball and i want it to bounce from a line that i drew. For that i need to find if the x,y of the ball are also coordinates of one dot from the line. I tried to implement these equations about lines x=a1 + t*u1 y=a2 + t*u2 = (x-a1)/u1=(y-a2)/u2 (t=t which has to be if the point is on the line) where x and y are the coordinates im testing, dot[a1,a2] is a dot that is on the line and u(u1,u2) is the vector of the line. heres the code: public boolean Collided() { float u1 =Math.abs(Math.round(begin_X)-Math.round(end_X)); float u2 =Math.abs(Math.round(begin_Y)-Math.round(end_Y)); float t_x =Math.round((elect_X - begin_X)/u1); float t_y =Math.round((elect_Y - begin_Y)/u2); if(t_x==t_y) { return true; } else { return false; } } points [begin_X,end_X] and [begin_Y,end_Y] are the two points from the line and [elect_X,elect_Y] are the coordinates of the ball theoreticaly it should work, but in the reality the ball most of the time just goes straigth through the line or bounces somewhere else where it shouldnt

  Read the article

• BasicDBObject or QueryBuilder and some newbie questions of Java and mongo

  - by Kevin Xu

  hi I'm a fresh newbie to mongodb Q1 using query=new BasicDBObject(); query.put("i", new BasicDBObject("$gt",13)); and query=new QueryBuilder().put("i").Greaterthan(13).get() is there any difference inside of the system? Q2 I've created a class class findkv extends BasicDBObject{ //is gt gte lt lte public findkv(String fieldname,String op,Object tvalue) { if (op=="") this.put(fieldname,tvalue); else this.put(fieldname, new BasicDBObject(op,tvalue)); } } shall I use it or shall I just use original function? Q3 I've used mongo shell for a few weeks, and was customed to it, and find writing in mongo shell faster and shorter, which side has more advantage, writing in mongo or in java? I shall dump them from mongo to mysql Q4 I've an if (statement==true) return else dowhat; seems can't be compiled I know I can write if (statement!=true) dowhat else return, but can I still write in first style? q5 my eclipse is Eclipse Java EE IDE for Web Developers. Version: Juno Release Build id: 20120614-1722 I'd like to install Perl which I haven't learned yet I choose Install Update http://e-p-i-c.sf.net/updates/testing but it doesn't work, any method to install perl to eclipse manually?

  Read the article

• Creating a Ruby method that pads an Array

  - by CJ Johnson

  I'm working on creating a method that pads an array, and accepts 1. a desired value and 2. an optional string/integer value. Desired_size reflects the desired number of elements in the array. If a string/integer is passed in as the second value, this value is used to pad the array with extra elements. I understand there is a 'fill' method that can shortcut this - but that would be cheating for the homework I'm doing. The issue: no matter what I do, only the original array is returned. I started here: class Array def pad(desired_size, value = nil) desired_size >= self.length ? return self : (desired_size - self.length).times.do { |x| self << value } end end test_array = [1, 2, 3] test_array.pad(5) From what I researched the issue seemed to be around trying to alter self's array, so I learned about .inject and gave that a whirl: class Array def pad(desired_size, value = nil) if desired_size >= self.length return self else (desired_size - self.length).times.inject { |array, x| array << value } return array end end end test_array = [1, 2, 3] test_array.pad(5) The interwebs tell me the problem might be with any reference to self so I wiped that out altogether: class Array def pad(desired_size, value = nil) array = [] self.each { |x| array << x } if desired_size >= array.length return array else (desired_size - array.length).times.inject { |array, x| array << value } return array end end end test_array = [1, 2, 3] test_array.pad(5) I'm very new to classes and still trying to learn about them. Maybe I'm not even testing them the right way with my test_array? Otherwise, I think the issue is I get the method to recognize the desired_size value that's being passed in. I don't know where to go next. Any advice would be appreciated. Thanks in advance for your time.

  Read the article

• Why do the outputs differ when I run this code using Netbeans 6.8 and Eclipse?

  - by Vimal Basdeo

  When I am running the following codes using Eclipse and Netbeans 6.8. I want to see the available COM ports on my computer. When running in Eclipse it is returning me all available COm ports but when running t in Netbeans, it does not seem to find any ports .. public static void test(){ Enumeration lists=CommPortIdentifier.getPortIdentifiers(); System.out.println(lists.hasMoreElements()); while (lists.hasMoreElements()){ CommPortIdentifier cn=(CommPortIdentifier)lists.nextElement(); if ((CommPortIdentifier.PORT_SERIAL==cn.getPortType())){ System.out.println("Name is serail portzzzz "+cn.getName()+" Owned status "+cn.isCurrentlyOwned()); try{ SerialPort port1=(SerialPort)cn.open("ComControl",800000); port1.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE); System.out.println("Before get stream"); OutputStream out=port1.getOutputStream(); InputStream input=port1.getInputStream(); System.out.println("Before write"); out.write("AT".getBytes()); System.out.println("After write"); int sample=0; //while((( sample=input.read())!=-1)){ System.out.println("Before read"); //System.out.println(input.read() + "TEsting "); //} System.out.println("After read"); System.out.println("Receive timeout is "+port1.getReceiveTimeout()); }catch(Exception e){ System.err.println(e.getMessage()); } } else{ System.out.println("Name is parallel portzzzz "+cn.getName()+" Owned status "+cn.isCurrentlyOwned()+cn.getPortType()+" "); } } } Output with Netbeans false Output using Eclipse true Name is serail portzzzz COM1 Owned status false Before get stream Before write After write Before read After read Receive timeout is -1 Name is serail portzzzz COM2 Owned status false Before get stream Before write After write Before read After read Receive timeout is -1 Name is parallel portzzzz LPT1 Owned status false2 Name is parallel portzzzz LPT2 Owned status false2

  Read the article

• Using javascript and php together

  - by EmmyS

  I have a PHP form that needs some very simple validation on submit. I'd rather do the validation client-side, as there's quite a bit of server-side validation that happens to deal with writing form values to a database. So I just want to call a javascript function onsubmit to compare values in two password fields. This is what I've got: function validate(form){ var password = form.password.value; var password2 = form.password2.value; alert("password:"+password+" password2:" + password2); if (password != password2) { alert("not equal"); document.getElementByID("passwordError").style.display="inline"; return false; } alert("equal"); return true; } The idea being that a default-hidden div containing an error message would be displayed if the two passwords don't match. The alerts are just to display the values of password and password2, and then again to indicate whether they match or not (will not be used in production code). I'm using an input type=submit button, and calling the function in the form tag: <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post" onsubmit="return validate(this);"> Everything is alerting as expected when entering non-matching values. I would have hoped (and assumed, based on past use) that if the function returned false, the actual submit would not occur. And yet, it is. I'm testing by entering non-matching values in the password fields, and the alerts clearly show me the values and the not equal result, but the actual form action is still occurring and it's trying to write to my database. I'm pretty new at PHP; is there something about it that will not let me combine with javascript this way? Would it be better to use an input type=button and include submit() in the function itself if it returns true?

  Read the article

< Previous Page | 329 330 331 332 333 334 335 336 337 338 339 340  | Next Page >