Search Results

Search found 27973 results on 1119 pages for 'power point vba'.

Page 335/1119 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >

  • Skipping scheduled self-tests and predicting drive EOL

    - by Steve Madsen
    For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

    Read the article

  • Why does my Delphi program's memory continue to grow?

    - by lkessler
    I am using Delphi 2009 which has the FastMM4 memory manager built into it. My program reads in and processes a large dataset. All memory is freed correctly whenever I clear the dataset or exit the program. It has no memory leaks at all. Using the CurrentMemoryUsage routine given in spenwarr's answer to: http://stackoverflow.com/questions/437683/how-to-get-the-memory-used-by-a-delphi-program, I have displayed the memory used by FastMM4 during processing. What seems to be happening is that memory is use is growing after every process and release cycle. e.g.: 1,456 KB used after starting my program with no dataset. 218,455 KB used after loading a large dataset. 71,994 KB after clearing the dataset completely. If I exit at this point (or any point in my example), no memory leaks are reported. 271,905 KB used after loading the same dataset again. 125,443 KB after clearing the dataset completely. 325,519 KB used after loading the same dataset again. 179,059 KB after clearing the dataset completely. 378,752 KB used after loading the same dataset again. It seems that my program's memory use is growing by about 53,400 KB upon each load/clear cycle. Task Manager confirms that this is actually happening. I have heard that FastMM4 does not always release all of the program's memory back to the Operating system when objects are freed so that it can keep some memory around when it needs more. But this continual growing bothers me. Since no memory leaks are reported, I can't identify a problem. Does anyone know why this is happening, if it is bad, and if there is anything I can or should do about it?

    Read the article

  • How to recover basic networking utilities on Debian?

    - by Rizo
    I am administrating a small server for LAN, providing basic services such as web-proxy, ldap, kerberos, afs, etc. Yesterday there was a power cut so server halted. When I restarted it no network interfaces were available and configured. I tried restarting networking daemon but it just exited with 0 status. So I tried to run one of the interfaces manually, but ifup and ifdown commands simply are not there. No only in PATH, but they disappeared from /sbin. So my question is: how can I recover these network utilities?

    Read the article

  • Windows 7 - Runs in safe mode, crashes in "normal" mode

    - by JonHopkins
    A couple of days ago I came back from a meeting to find my laptop had locked up. Power lights still on but the screen was blank (by which I mean black, though still "backlit" so not dead). Didn't respond to anything. I rebooted and it powered up fine and I got to the login screen. I logged in and it seemed to be going fine for about 30 seconds (gmail notifier and pidgin popped up) then the same thing happened - black screen. If I boot into Safe Mode it's all fine, no problems. I've tried removing everything from the startup folders (All users and my login), everything from the Run section of the registry (Local Machine and my login) and I've disabled every service which doesn't run in Safe Mode (assuming anything running in safe mode is OK) but the problem still exists. I've scanned the memory for errors (all fine). Any thoughts on what else I could try?

    Read the article

  • Raid HDD Boot up

    - by user234695
    My server is Power Edge 1950 running server 2008 32Bit, using 3 Physical SAS HDD as a Virtual 2 Disk configured for RAID5, with partition of C drive as OS and D drive as Data. Planning to format and install Server 2008 R2 64Bit so I insert a New Physical disk and configured as RAID5 and clone the C drive and D drive to the new hard disk. Now I need to test that the new hard disk is able to boot windows and work as expected. How do I test, I am not able to boot the windows by choosing the new harddisk, the bios show only the existing HDD, not the new one. Also, if I remove the old three hard disk, and leave the new harddisk and then am I able to boot the device, if I do this does my existing RAID5 configuration and data on the hard disk still remain.

    Read the article

  • Virtual Box fails my OSes :(

    - by Kingston Town
    I have a little problem with Virtual Box latest version in which i have installed Mint (also latest version).During creation of a new vdi partition I chose settings as default, that is, I don't create any tiny partitions myself. The installation works. But later while the new OS is running (not in Live mode) I try installing/updating new software available, the system automatically fails, it reports an error of DISKFULL, I close the message box then power off my system. Later on I can't boot it up again anymore. It hangs with a black screen and the PAUSE status. I have no idea why. I have installed 2 OSes and both fail at the same error. I doubt something is not right about the current version of VBox. Thank you . My host OS is Windows7 and my Clients are Mint and CentOS

    Read the article

  • Submit information to url, but also open PDF

    - by Mad Ducky Digital Branding
    I have a client whose desire is to have her Wordpress blog show a MailChimp form on her home page as a gateway to a .pdf. I need the following behavior to occur when the user clicks "Submit": execute the included MailChimp's javascript file; this ensures the form was properly filled, and then performs the sign-up to the newsletter list (don't need help with this part) then show the user an informational PDF for download or viewing EDIT: The logical order was flipped from when I originally posted this. The script should execute, and only if the script gets executed properly should the PDF show to the user Note: My experience level with HTML and PHP is 3/4, and with JS I am 2/4 EDIT: (seems more like 1/4 at this point lol). If my research is correct, PHP (server-side language) would be used to do that which the client wants. Additional validation is not necessary beyond what MailChimp's script provides (it ensures that user has submitted a completed form) is not necessary in this case (the client says it's ok if the e-mail isn't valid at all). EDIT: Reworded this sentence from original post to be more clear The .pdf URL and content is static, and simply needs to be shown, not generated. ----RESEARCH---- I know that the Mailchimp form uses the following line to actually submit the information, but I want to do the action mentioned below, as well as open the aforementioned .pdf: <form action="http://*BLAH*.us2.list-manage.com/subscribe/post?u=*BLAHBLAH*&amp;id=*BLAHBLAHBLAH*" method="post" id="mc-embedded-subscribe-form" name="mc-embedded-subscribe-form" class="validate" target="_blank"> I am reading on other sites that I can conceivably point "action" to a .php file, but if there is a way to do this with javascript - since its using the .js file that I created for that already anyways, then I would be most happy. Barring that, I'll take what I can get.. ----SOLUTION?---- ...

    Read the article

  • How should I remotely manage Dell Poweredge 2850 running Ubuntu server?

    - by Saul
    First I've got to say I'm a Linux / Ubuntu novice, so go gentle on me as I'm on day 3. I've managed to get Ubuntu server Ubuntu 8.04 LTS installed and running on the Poweredge 1850 I bought off ebay. The box will go in a rack at my office but I want to be able to work on it and power on and off from home and I gather that (maybe) IPMI over LAN might be the way to do this, or maybe its something to do with BMC or something? I want to be able to administer/manage from a client PC at home running XP. I will be configuring the office router to port forward port 80 and 443 to the Ubuntu server running Apache2, and I'm puzzled about how the remote management works (unless it comes on a different port forwarded to a different internal IP) Thanks for any help

    Read the article

  • Program complains not enough disk space even if the disk space exists

    - by user1189899
    I have an EXT3 partition mounted in ordered data mode. If a power failure occurs when a program is creating files on that partition, I see that space usage reported is normal and I don't see any partial written files. But when I try to run the same program again after the system comes back up it complains that there is not enough disk space. Even though the free space reported is far more than required. The program always succeeds in normal conditions. Also the problem seems to disappear when the partition is remounted. I was wondering what could be the right way to handle the situation other than unmounting and remounting.

    Read the article

  • Scaling Literate Programming?

    - by Tetha
    Greetings. I have been looking at Literate Programming a bit now, and I do like the idea behind it: you basically write a little paper about your code and write down as much of the design decisions, the code probably surrounding the module, the inner workins of the module, assumptions and conclusions resulting from the design decisions, potential extension, all this can be written down in a nice way using tex. Granted, the first point: it is documentation. It must be kept up-to-date, but that should not be that bad, because your change should have a justification and you can write that down. However, how does Literate Programming Scale to a larger degree? Overall, Literate Programming is still just text. Very human readable text, of course, but still text, and thus, it is hard to follow large systems. For example, I reworked large parts of my compiler to use and some magic to chain compile steps together, because some "x.register_follower(y); y.register_follower(z); y.register_follower(a);..." got really unwieldy, and changing that to x y z a made it a bit better, even though this is at its breaking point, too. So, how does Literate Programming scale to larger systems? Does anyone try to do that? My thought would be to use LP to specify components that communicate with each other using event streams and chain all of these together using a subset of graphviz. This would be a fairly natural extension to LP, as you can extract a documentation -- a dataflow diagram -- from the net and also generate code from it really well. What do you think of it? -- Tetha.

    Read the article

  • Best fit curve for trend line

    - by Dave Jarvis
    Problem Constraints Size of the data set, but not the data itself, is known. Data set grows by one data point at a time. Trend line is graphed one data point at a time (using a spline/Bezier curve). Graphs The collage below shows data sets with reasonably accurate trend lines: The graphs are: Upper-left. By hour, with ~24 data points. Upper-right. By day for one year, with ~365 data points. Lower-left. By week for one year, with ~52 data points. Lower-right. By month for one year, with ~12 data points. User Inputs The user can select: the type of time series (hourly, daily, monthly, quarterly, annual); and the start and end dates for the time series. For example, the user could select a daily report for 30 days in June. Trend Weight To calculate the window size (i.e., the number of data points to average when calculating the trend line), the following expression is used: data points / trend weight Where data points is derived from user inputs and trend weight is 6.4. Even though a trend weight of 6.4 produces good fits, it is rather arbitrary, and might not be appropriate for different user inputs. Question How should trend weight be calculated given the constraints of this problem?

    Read the article

  • When does MSBuild set the $(ProjectName) property?

    - by bwerks
    I'm fairly new to MSBuild, and I've done some customization on a Wpf project file that I'm building both in VS2010 and TFS2010. I've customized the output path as follows: <OutputPath Condition=" '$(TeamBuildOutDir)' == '' ">$(SolutionDir)build\binaries\$(ProjectName)\$(Configuration)\$(Platform)</OutputPath> <OutputPath Condition=" '$(TeamBuildOutDir)' != '' ">$(TeamBuildOutDir)binaries\$(ProjectName)\$(Configuration)\$(Platform)</OutputPath> This allows me to build to a centralized binaries directory when building on the desktop, and allows TFS to find the binaries when CI builds are running. However, it seems that in both cases, the $(ProjectDir) property is evaluating to '' at buildtime, which creates strange results. Doing some debugging, it appears as if $(ProjectName) is set by the time BeforeBuild executes, but that my OutputPath property is evaluating it prior to that point. <ProjectNameUsedTooEarly Condition=" '$(ProjectName)' == '' ">true</ProjectNameUsedTooEarly> The preceeding property is in the same property group as my OutputPath property. In the BeforeBuild target, $(ProjectNameUsedTooEarly) evaluates to true, but $(ProjectName) evaluates to the project name as normal by that point. What can I do to ensure that $(ProjectName) has got a value when I use it? edit: I just used Attrice's MSBuild Sidekick to debug through my build file, and in the very first target available for breakpoint (_CheckForInvalidConfigurationAndPlatform) all the properties seem to be set already. ProjectName is already set correctly, but my OutputPath property has already been set using the blank value of ProjectName.

    Read the article

  • Dedicated GPU in Dell PowerEdge C1100

    - by Eli Gundry
    We recently purchased a Dell PowerEdge C1100 off lease with the initention of using it for graphics processing. We installed an AMD HD 7000 series GPU in it that runs off of board power and it sends video to the display. That said, the video is very choppy, leading us to belive that the onboard video is doing all the processing and sending it to the card. Is there any way to either disable the VGA on this server or tell the OS to only use the dedicated card. More info: The server is running REHL 6.4 The graphics running the proprietary AMD drivers The video card only works in OS and does not show the BIOS on boot (we know that it's impossible to change this) Any ideas, guys? Update We are now thinking that the GPU is doing the graphics processing, but not working at the full speed of the PCI bus. Which is odd, because it is an x16 slot, but probably optimized to use a RAID card (if that makes any sense). Is there any way to remedy the choppy graphics on this server?

    Read the article

  • How small is too small (of laptop for a programmer)

    - by defn
    Im thinking of replacing my HP Pavilion dv5-1004nr with Acer Aspire AS5738-6444, I'm a CS student... so im torn between screen size (liking the 15in and decent gpu.. but it weight nearly 8 pounds and battery can barely last 2 hours in power saver mode) and wanting something portable to carry to classes/take notes ect (3 pounds and up to 8 hour battery life of the acer) what would you guys suggest? acer any good? i love my hp keyboard.. (or have links to other good laptops, im aiming for 600$ range?)

    Read the article

  • Relational vs. Dimensional Databases, what's the difference?

    - by grautur
    I'm trying to learn about OLAP and data warehousing, and I'm confused about the difference between relational and dimensional modeling. Is dimensional modeling basically relational modeling, but allowing for redundant/un-normalized data? For example, let's say I have historical sales data on (product, city, # sales). I understand that the following would be a relational point-of-view: Product | City | # Sales Apples, San Francisco, 400 Apples, Boston, 700 Apples, Seattle, 600 Oranges, San Francisco, 550 Oranges, Boston, 500 Oranges, Seattle, 600 While the following is a more dimensional point-of-view: Product | San Francisco | Boston | Seattle Apples, 400, 700, 600 Oranges, 550, 500, 600 But it seems like both points of view would nonetheless be implemented in an identical star schema: Fact table: Product ID, Region ID, # Sales Product dimension: Product ID, Product Name City dimension: City ID, City Name And it's not until you start adding some additional details to each dimension that the differences start popping up. For instance, if you wanted to track regions as well, a relational database would tend to have a separate region table, in order to keep everything normalized: City dimension: City ID, City Name, Region ID Region dimension: Region ID, Region Name, Region Manager, # Regional Stores While a dimensional database would allow for denormalization to keep the region data inside the city dimension, in order to make it easier to slice the data: City dimension: City ID, City Name, Region Name, Region Manager, # Regional Stores Is this correct?

    Read the article

  • Lock screen keeps making sound when screen is off

    - by row1
    I have my laptop (Asus UL20FT) on external power and hooked up to an external monitor. I keep the laptop lid closed and am using the 'second screen only' option. If you leave it on the lock screen for a short period of time the screen powers off. While the screen is off it keeps repeating a "duuuh duh duh" sound (sounds just like the device plugged in sound). The monitor is connected via HDMI and I have Microsoft and Logitech wireless USB dongles plugged in. How can I prevent this sound loop?

    Read the article

  • Should the entity framework + self tracking entities be saving me time

    - by sipwiz
    I've been using the entity framework in combination with the self tracking entity code generation templates for my latest silverlight to WCF application. It's the first time I've used the entity framework in a real project and my hope was that I would save myself a lot of time and effort by being able to automatically update the whole data access layer of my project when my database schema changed. Happily I've found that to be the case, updating my database schema by adding a new table, changing column names, adding new columns etc. etc. can be propagated to my business object classes by using the update from database option on the entity framework model. Where I'm hurting is the CRUD operations within my WCF service in response to actions on my Silverlight client. I use the same self tracking entity framework business objects in my Silverlight app but I find I'm continually having to fight against problems such as foreign key associations not being handled correctly when updating an object or the change tracker getting confused about the state of an object at the Silverlight end and the data access operation within the WCF layer throwing a wobbly. It's got to a point where I have now spent more time dealing with this quirks than I have on my previous project where I used Linq-to-SQL as the starting point for rolling my own business objects. Is it just me being hopeless or is the self tracking entities approach something that should be avoided until it's more mature?

    Read the article

  • WPF: Same line drawn different?

    - by stefan.at.wpf
    Hello, I have a canvas and in it I'm drawing some lines: for (int i = 1; i >= 100; i++) { // Line LineGeometry line = new LineGeometry(); line.StartPoint = new Point(i * 100, 0); line.EndPoint = new Point(i * 100, 100 * 100); // Path Path myPath = new Path(); myPath.Stroke = Brushes.Black; myPath.StrokeThickness = 1; // Add to canvas myPath.Data = line; canvas1.Children.Add(myPath); } Well, nothing special, but it makes problems - the lines are drawn different! The canvas is inside a scrollviewer, the following image shows different positions of the canvas, however the lines should look the same? Hell, how is this possible? The code above is the only code I've written by hand and it's the only content in the canvas. Anyone knows why this happens and how to prevent this? Thank you very much! Screenshot: http://www.imagebanana.com/view/c01nrd6i/lines.png

    Read the article

  • Secure Password Storage and Transfer

    - by Andras Zoltan
    I'm developing a new user store for my organisation and am now tackling password storage. The concepts of salting, HMAC etc are all fine with me - and want to store the users' passwords either salted and hashed, HMAC hashed, or HMAC salted and hashed - not sure what the best way will be - but in theory it won't matter as it will be able to change over time if required. I want to have an XML & JSON service that can act as a Security Token Service for client-side apps. I've already developed one for another system, which requires that the client double-encrypts a clear-text password using SHA1 first and then HMACSHA1 using a 128 unique key (or nonce) supplied by the server for that session only. I'd like to repeat this technique for the new system - upgrading the algo to SHA256 (chosen since implementations are readily available for all aforementioned platforms - and it's much stronger than SHA1) - but there is a problem. If I'm storing the password as a salted hash in the user-store, the client will need to be sent that salt in order to construct the correct hash before being HMACd with the unique session key. This would completely go against the point of using a salt in the first place. Equally, if I don't use salt for password storage, but instead use HMAC, it's still the same problem. At the moment, the only solution I can see is to use naked SHA256 hashing for the password in the user store, so that I can then use this as a starting point on both the server and the client for a more secure salted/hmacd password transfer for the web service. This still leaves the user store vulnerable to a dictionary attack were it ever to be accessed; and however unlikely that might be - assuming it will never happen simply doesn't sit well with me. Greatly appreciate any input.

    Read the article

  • Cannot see http (apache) server outside home network

    - by user165155
    Ive been racking my brain with this all evening. Power went out with a tstorm today, started back up my server... running apache and a team speak server on it. TS is great, cant see my web page outside my network! Firewall is disabled on the pc running it (centos btw), apache is running and working. correct ports are forwarded on my router (my isp blocks port 80). Ive tried changing ports, pretty much everything i can think of. httpd.conf is pointing to the correct addy and port, and my domain is pointing to the correct external ip. Im at a loss, any ideas out there?

    Read the article

  • Windows 7 - cancel mirror synchronisation

    - by Chris W
    I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

    Read the article

  • Windows 7 - cancel mirror synchronisation

    - by Chris W
    I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

    Read the article

  • Ubuntu, No wireless networks found after correctly installed madwifi

    - by Peter
    Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

    Read the article

  • Internet (Flash) video without a PC

    - by Rob Allen
    I am looking to retire my HTPC. So much of what we do with it can be done with one of our video game consoles or an AppleTV that is seems like a waste of space, power and time to maintain. The trouble is that my wife does streaming yoga classes served up via specific websites. I am assuming they are Flash based and so far I have been unable to find Apps for these content providers. My question is, is there a GOOD way to handle flash-based or even HTML5/h.264 web content with one of the other Internet enabled devices in our stack? So far we have: Nintendo Wii Playstation 3 XBox 360 And we're looking to purchase a current generation AppleTV. update The sites are YogisAnonymmous.com and YogaJournal.com, both are confirmed as Flash.

    Read the article

  • How do you change your Airport or Ethernet MAC address in Mac OS X 10.6?

    - by Dave Gallagher
    I have a MacBook Pro and would like to set a custom MAC address for either my Airport WiFi card, or Ethernet port. In older versions of Mac OS X, you could do it like this: $ sudo ifconfig en0 ether 00:11:22:33:44:55 // Ethernet $ sudo ifconfig en1 lladdr AA:BB:CC:DD:EE:FF // Airport For it to work on Airport, you'd have to power it on (e.g. $ sudo ifconfig en1 up), ensure it's not connected to any wireless network, and execute the command. I'm aware such a change won't propagate across reboots. Unfortunately, this doesn't work on Mac OS X 10.6.6 anymore. Apple appears to have removed the functionality (the command fails silently). Does anyone have any idea how to do it? Thanks for any help you can offer! :)

    Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342  | Next Page >