Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 338/1051 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

• Stop squid caching 302 and 307 with deny_info

  - by 0xception

  TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

  Read the article

• 2 nics. 2 Defaults Gateways

  - by andre.dias

  Here is my scenario: i have this server with 2 nics, each one with different IPs, connected to differents routers. Almost everything is configured whe way i need. Traffic coming from eth0 exits using eth0, traffic coming from eth1 exits using eth1. And there is a default gateway configured. $route: default IP 0.0.0.0 UG 0 0 0 eth0 With this configuration, the traffic generated in the server is going out using eth0 (lynx www.google.com for example). The problem is: the Internet link from eth0 went down today. The traffic coming from eth1 was ok...no problem. But the traffic generated in the server was a problem...the default gateway was out...no access do the Internet anymore (no more lynx www.google.com) So i added a new default gateway configuration, pointing to eth1. For 30 minutes i kept that way...2 default gateways, but just one was "working"...and everything was working just fine. But then i removed de eth0 gateway entry because, well, 2 default gateways is kind of weird. My question: is there any problem on keeping these 2 default gateways, one for each? So i don´t need to do nothing when one link go down again? $route: default IP1 0.0.0.0 UG 0 0 0 eth0 default IP2 0.0.0.0 UG 0 0 0 eth1

  Read the article

• open mysql to any connection on ubuntu

  - by ThomasReggi

  I simply want to open up mysql to be accessible from any server ip. I have already commented out the bind-address in /etc/mysql/my.conf. I have already setup the user account within mysql. I have no clue whats stopping me from connecting. The more challenging I see this being the more I realize how much of a security risk it is, and I get that, I just want to be able to do it temporarily. I think that the iptables firewall is the last thing that is preventing me from achieving this, but sudo iptables -A INPUT -p tcp -m tcp --dport 3306 -j ACCEPT is seemingly doing nothing.

  Read the article

• How do I add missing dictionaries for aspell?

  - by Ahmed

  Aspell version: $ aspell -v @(#) International Ispell Version 3.1.20 (but really Aspell 0.60.6) Dump dict yields no results: $ aspell dump dicts First noticed the problem when I did this, was originally working on web server, but someone updated something and it hasn't worked since: $ aspell check temp_test_file.txt Error: No word lists can be found for the language "en_US". What's the proper way of installing the required dictionaries? I believe we're running this on CentOS. And also, /usr/lib/aspell-0.60 does not contain the required dictionaries (provided that they're supposed to be saved there). data-dir: /usr/lib/aspell-0.60

  Read the article

• IPv6 static routes

  - by user98651

  I am looking to configure a few hosts with IPv6 on my network. The router (running CentOS 5) is configured with an Hurricane Electric (HE) tunnel which works fine on that host. However, I would like to statically add a few additional hosts on the same LAN to have IPv6 through this tunnel. No, I don't want radvd or dhcpv6 to do the work for me in this case. I already have IPv6 forwarding enabled in sysctl.conf. I am looking for help with the next steps (statically adding the routes). Lets say the IP addresses are as follows: Router: 2001:470:1b07:1:: Host1: 2001:470:1b07:2:: How would I go about making them see each other? Thanks in advance for the help.

  Read the article

• OSSEC agent behind NAT

  - by Eric

  I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

  Read the article

• Monitoring outgoing bandwidth of application

  - by jnolte

  I currently have a VPS that is consuming a ton of outgoing bandwidth and I am trying to drill down to where this may be coming from. Does anyone know of a logical way to go about finding out which pages on the site are consuming the most outgoing data. We have done a ton of front-end optimizations to the site and our google page speed rankings ar 85% so I feel we have done a pretty great job at optimizing the site for speed. Can someone lend some insight on how they have made similar optimizations? Application / Server Stack LEMP Running Varnish Cache / PHP5-FPM WordPress running w3 Total Cache Ubuntu 12.04 LTS

  Read the article

• Read only bind-mount?

  - by depesz

  I use mount -o bind to mount directories inside chroots, which works really well. The problem is that I'd like some of these bind-mounted directories to be read only in chroot. Is it possible? If not - any other way to achieve it? I was thinking about using NFS for localhost mounts, but it looks like overkill.

  Read the article

• Pecl install ssh2, make failed

  - by user28259

  Hi! I'm trying really hard since two hours to install ssh2 with pecl... But all I get is: /bin/sh /root/ssh2-0.11.0/libtool --mode=compile cc -I. -I/root/ssh2-0.11.0 -DPHP_ATOM_INC -I/root/ssh2-0.11.0/include -I/root/ssh2-0.11.0/main -I/root/ssh2-0.11.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/ssh2-0.11.0/ssh2.c -o ssh2.lo mkdir .libs cc -I. -I/root/ssh2-0.11.0 -DPHP_ATOM_INC -I/root/ssh2-0.11.0/include -I/root/ssh2-0.11.0/main -I/root/ssh2-0.11.0 -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/ssh2-0.11.0/ssh2.c -fPIC -DPIC -o .libs/ssh2.o /root/ssh2-0.11.0/ssh2.c:52: error: duplicate 'static' /root/ssh2-0.11.0/ssh2.c: In function 'zif_ssh2_methods_negotiated': /root/ssh2-0.11.0/ssh2.c:503: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:504: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:508: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:509: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:510: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:511: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:516: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:517: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:518: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c:519: warning: passing argument 4 of 'add_assoc_string_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:360: note: expected 'char *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c: In function 'zif_ssh2_publickey_add': /root/ssh2-0.11.0/ssh2.c:1045: warning: passing argument 1 of '_efree' discards qualifiers from pointer target type /usr/include/php/Zend/zend_alloc.h:46: note: expected 'void *' but argument is of type 'const char *' /root/ssh2-0.11.0/ssh2.c: In function 'zif_ssh2_publickey_list': /root/ssh2-0.11.0/ssh2.c:1104: warning: passing argument 4 of 'add_assoc_stringl_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:361: note: expected 'char *' but argument is of type 'const unsigned char *' /root/ssh2-0.11.0/ssh2.c:1105: warning: passing argument 4 of 'add_assoc_stringl_ex' discards qualifiers from pointer target type /usr/include/php/Zend/zend_API.h:361: note: expected 'char *' but argument is of type 'const unsigned char *' make: *** [ssh2.lo] Error 1 I looked on google a lot, I found some patches which didn't worked at all. So if you think you could help me, go ahead! Thanks!

  Read the article

• My server freezes within a few hours of logging out. Staying logged in keeps the server running

  - by HappyEngineer

  I have an Ubuntu Godaddy server I use to host mail and webapps. It started having problems a couple months ago. It would lock up and stop responding to anything. I couldn't ssh into it, so I'd have godaddy power cycle the server. I have never seen anything that looked suspicious in the var logs (although I'm no expert at reading them). An fsck turned up no problems. Godaddy replaced the ram, but found no hardware problems. I started logging the output from "top" to a log file and found that even that stops running when the server freezes. Now, here is the crazy part: It got so bad that it would actually go down every few hours, but then it stopped going down. I eventually realized I had left an ssh terminal logged into the machine running top. This seemed unlikely to be a reason, but after the server was up with no problems for a full week (remember, it had been going down after just a few hours), I disconnected from the ssh session. Lo and behold, within a few hours the server froze again! I had them power cycle again and then left another ssh session open with top. It has been going without problems for 8 days now. I told others about this and they hardly believe me. I simply can't imagine what is going on. I don't know what else to try other than to just get a new server and reinstall everything. Does anyone have any ideas about what I can look for to determine what the cause is? Is it possible there's some sort of exploit on the server which only runs if everyone is logged out of the system? EDIT: The power management gone haywire sounds plausible, so I've modified the /boot/grub/menu.lst to boot with acpi=off and apm=off. It appears to have prevented kacpid and kacpid_notify from being in the process list, so I assume I did that right. I've disconnected all my sessions from the server. I'll check later tonight to see if it's still up. If it goes down then I'll try the pinging process idea. EDIT: It went down again. It lasted about a day. I've had them reboot, so now I'll try running "nohup ping -i 5 google.com &" and then disconnect. If it goes down again I'll come back. Hopefully someone will have some more ideas.

  Read the article

• Why is (free_space + used_space) != total_size in df? [migrated]

  - by Timothy Jones

  I have a ~2TB ext4 USB external disk which is about half full: $ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdc 1922860848 927384456 897800668 51% /media/big I'm wondering why the total size (1922860848) isn't the same as Used+Available (1825185124)? From this answer I see that 5% of the disk might be reserved for root, but that would still only take the total used to 1921328166, which is still off. Is it related to some other filesystem overhead? In case it's relevant, lsof -n | grep deleted shows no deleted files on this disk, and there are no other filesystems mounted inside this one.

  Read the article

• RHEL 5/CentOS 5 - sshd becomes unresponsive

  - by ewwhite

  I have a number of CentOS 5.x and RHEL 5.x systems whose SSH daemons become unresponsive, preventing remote logins. The typical error from the connecting side is: $ ssh db1 db1 : ssh_exchange_identification: Connection closed by remote host Examining /var/log/messages after a forced reboot shows the following leading up to the restart: Dec 10 10:45:51 db1 sshd[14593]: fatal: Privilege separation user sshd does not exist Dec 10 10:46:02 db1 sshd[14595]: fatal: Privilege separation user sshd does not exist Dec 10 10:46:54 db1 sshd[14711]: fatal: Privilege separation user sshd does not exist Dec 10 10:47:38 db1 sshd[14730]: fatal: Privilege separation user sshd does not exist These systems use LDAP authentication and the nsswitch.conf file is configured to look at local "files" first. [root@db1 ~]# cat /etc/nsswitch.conf # # /etc/nsswitch.conf # passwd: files ldap shadow: files ldap group: files ldap hosts: files dns The Privilege-separated SSH user exists in the local password file. [root@db1 ~]# grep ssh /etc/passwd sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin Any ideas on what the root cause is? I did not see any Red Hat errata that covers this.

  Read the article

• All traffic is passed through OpenVPN although not requested

  - by BFH

  I have a bash script on a Ubuntu box which searches for the fastest openvpn server, connects, and binds one program to the tun0 interface. Unfortunately, all traffic is being passed through the VPN. Does anybody know what's going on? The relevant line follows: openvpn --daemon --config $cfile --auth-user-pass ipvanish.pass --status openvpn-status.log There don't seem to be any entries in iptables when I enter sudo iptables --list. The config files look like this: client dev tun proto tcp remote nyc-a04.ipvanish.com 443 resolv-retry infinite nobind persist-key persist-tun persist-remote-ip ca ca.ipvanish.com.crt tls-remote nyc-a04.ipvanish.com auth-user-pass comp-lzo verb 3 auth SHA256 cipher AES-256-CBC keysize 256 tls-cipher DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA There is nothing in there that would direct everything through tun0, so maybe it's a new vagary of Ubuntu? I don't remember this happening in the past.

  Read the article

• can't figure out why apache LDAP auth fails

  - by SethG

  Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

  Read the article

• Can I use a package manager of one distribution on another?

  - by Yktula

  I want to use Gentoo's packages on Fedora. Is this possible?

  Read the article

• needing storage integrity (write/read) test - for BASH

  - by Mr. Bash

  In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

  Read the article

• NAT ports - how do they work?

  - by Davidoper

  I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

  Read the article

• socat and rich terminals (with Ctrl+C/Ctrl+Z/Ctrl+D propogation)

  - by Vi

  socat - exec:'bash -li',pty,stderr,ctty - bash: no job control in this shell What options should I use to get fully fledged shell as I get with ssh/sshd? I want be able to connect the shell to everything socat can handle (socks5, udp, openssl), but also to have a nice shell which correctly interprets all keys, various Ctrl+C/Ctrl+Z and jobs control. Update: Found "setsid" socat option. It fixes "no job control". Now trying to fix Ctrl+D.

  Read the article

• What's the best way of handling permissions for apache2's user www-data in /var/www ?

  - by gyaresu

  Has anyone got a nice solution for handling files in /var/www/ ? We're running Name Based Virtual Hosts and the apache2 user is 'www-data' We've got two regular users & root. So when messing with files in /var/www ,rather than having to... chown -R www-data:www-data ...all the time, what's a good way of handling this? Supplementary question. How hardcore do you then go on permissions? This one has always been a problem in collaborative development environments. Cheers.

  Read the article

• GlusterFS on VMWare ESXi 5

  - by Dharmavir

  I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

  Read the article

• NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use

  - by Francesco

  I have an issue with sendmail on my server (ubuntu 12.10) with php, mysql,and wordpress installed. Basically I want to create a contact form in my blog to receive emails from visitors directly into my gmail account but it doest work! I created a php file called testmail.php to recall it from the browser: <?php $to = '[email protected]'; $subbject = 'TEST MAIL'; $msg = 'test test test test test test test test test test test test test test test'; $isMailed = mail($to, $subbject, $msg, 'From:me <[email protected]>'); if($isMailed) echo 'mail has been send to: ' . $to; else echo 'mail has NOT been send..'; ?> But I dont receive anything! The /var/log/mail.log says: NOQUEUE: SYSERR(root): opendaemonsocket: daemon MTA-v4: cannot bind: Address already in use What do i do wrong? Where do I need to check? What info do you need more? I checked also into the spam folder, nothing. Thank you!

  Read the article

• Wake On Lan for Fedora 12

  - by Toymakerii

  I have a fedora 12 box that I am using as a sandbox for web development and a few other toys. The box gets really hot so I would like it to sleep/hibernate when no one is using it, however most of the people connecting to the box will not be able to access it physically. Is it possible to set up a Wake On Lan that wakes up the machine when it detects an SSH connection? A google search didn't yield much information. (or atleast I wasn't smart enough to register it as useful!)

  Read the article

• Limiting Sybase ASE 15 CPU usage on VM

  - by reiniero

  I've set up a single CPU Sybase ASE 15.7 test/hobby/experimentation system on a Debian Squeeze x64 KVM VM. I notice the CPU load goes to 100% and stays there. Definitely not a Sybase guru, only interested to see if some programs I'm running work on the database. Looking at Sybase docs it seems ASE detects the machine is idle and then takes over all processing just waiting for a connection (and if needed, doing some housekeeping apparently). Normally that would be fine but as it is running in a VM it's taking away processor resources other VMs could use - and the increased fan noise of the PC near my desk annoy me. I've tried to remedy this: set the "runnable process search count" parameter from DEFAULT (2000 IRC) to 3 in /opt/sybase/ASE-15_0/SYBASE.cfg from http://sybase.reygrobellet.com/tutorials/install_sybase_vb/standalone04_configure_oralin11#TOC-Configure-kernel I added this to my /etc/init.d/sybase startup script: echo 0 /proc/sys/kernel/randomize_va_space (though I don't think it'll make much difference) How can I tell Sybase to "behave" and not hog the processor - I don't mind reduced performance.

  Read the article

• How do I determine the cause of a sustained spike in mysql queries/activity?

  - by mattmcmanus

  So this is more of a "I'm trying to learn about how this works" question rather than "there is a serious problem I can't figure out!" question. I'm setting up a VPS and have been tweaking and changing things here and there. I recently installed munin (like two days ago) and yesterday I noticed a significant increase in mysql activity. So now my curiosity is going crazy. How do I setup/access mysql's query log? I have about 5 databases on the server so I want to see which one is getting all the action. Is there anything else I can do to keep a better eye on what's going on? Here are the graphs. As you can tell, it's not that much activity at all but I'm just curious at the change. The sites that are on the server right now do not get a lot of traffic. It's running a couple drupal sites, only one of which is live. The live one hasn't had a spike in traffic and the last spike was 250 visitors so it's barely a spike at all.

  Read the article

• Protect Gnome Screen Saver Settings

  - by Jared Brown

  By default in Gnome standard users can access their screensaver preferences and change settings such as the idle time and whether or not it locks the screen. I desire to set the screensaver settings as the root user for each user and only allow the root user to adjust them. What is the best (read: simplest + fool proof) way to accomplish this?

  Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >