Search Results

Search found 12281 results on 492 pages for 'ip blocking'.

Page 340/492 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• Mass change Microsoft DNS & IIS server settings

  - by Antonius Bloch

  I need to change about 100 DNS records and IIS configurations on a Windows 2003 web server. The gui doesn't accommodate it and the MS command line tools seem incomplete (for example: dnscmd cannot edit a record, only create). Is there a third party tool out there I can use? Basically I just need to change one IP address to another. <vent It's frustrating that what would take a simple search and replace in Linux is this massive exercise under Windows. I mean IIS 6 wasn't Microsoft's first web platform! What were they thinking??? </vent

  Read the article

• Add power over Ethernet without new switches?

  - by dannymcc

  I need to power 16 IP phones over their Ethernet connections. I am in the process of changing our switches and only the phones need PoE, everything else is powered by mains cables. I have contacted the supplier of the phones and for 16 mains leads it will be close to £300. I know it's possible to get a PoE injector that goes between the mains and the phone but I would like to do this as tidily as possible and ideally in bulk. I imagine something that looks like a switch but doesn't actually 'switch' if that makes sense. Basically I want to inject power to 16 devices at once.

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• Where to begin with IPv6 [closed]

  - by Willem de Vries

  I am fairly familiar with setting-up IPv4 networks for bigger server configurations, only now I wanted to start familiarizing myself with doing the same for IPv6. I have been Googling for the second night in a row for things like: IPv6 network design, IPv6 for dummies, etc. So far most things you find go on about why IPv6 and the amazing amount of numbers that we have now. Yet I am looking for practical stuff, for example: what would be a good way to assign IP-number, as I understand it DHCP shouldn't be the default course of action. How do other assignment methods work with DNS configuration? what would be a good or standard way of dividing the network in to sub-nets? (database, application, web servers spread over multiple domains/applications and some what intertwined) In short I would like to find good resources with practical information books, webpages, etc.

  Read the article

• Load balancing with rsync

  - by David

  i have 2 server with public ip: SERVER A - 10.10.10.11 SERVER B - 10.10.10.12 both of them are centos 6 in OS, installed nginx with php-fpm, 2 exact same website stored at: /var/www/html. Domain with: myxdomain.com and dns hosted with cloudflare ( since cloudflare do support round robin ) to point the domain to A record of 10.10.10.11 and 10.10.10.12. I know that round robin dns does not cover the failover or fallover, but it does not matter, what i need is: How do i sync the both content of /var/www/html server A and server B to be exactly same? Lets say: 1) user uploaded their file to server A, the file content will be sync to server B as well. 2) user uploaded their file to server B, the file content will be sync to server A as well. rsync will be good choice here? Any example of command line and cronjob time that suitable? thanks

  Read the article

• mod_proxy security

  - by brad

  I'm on Debian Lenny using apache2. in my proxy.conf I tried adding Allow from localhost as suggested in some other forums to get proxying to work. Didn't work. It only worked if I say Allow from all My question is this. Are there any security implications to this Allow from all directive? Most people were saying to make this as limited as possible, but "all" is the client right? I want anyone regardless of their IP to be forwarded properly. Is there a better way to configure this?

  Read the article

• SSL Proxy: Forwarding without the encryption

  - by John

  I have a python application listening on port 9001 for HTTP traffic. I'm trying to configure Apache (or anything, really) to listen on port 443 for HTTPS connections, and then forward the connection, sans encryption, to port 9001 on the same machine. My application would then reply via the proxy, where the encryption would be reapplied, and returned to the client transparently. I'm not doing anything crazy with the site names and SSL certs, I have one public IP, one hostname, and one SSL cert. Stripping the encryption at the proxy doesn't seem to be a common requirement. Is what I'm asking for a normal requirement? Are there other concerns with this sort of configuration?

  Read the article

• Failed pinging a LAN card of the server from the client using shared internet connection

  - by bobo

  The server (Windows XP Pro SP3) has two LAN cards (LAN card A and B) and is connected to the internet using ADSL. The ADSL connection is shared to LAN card B using Internet Connection Sharing. The client (Windows XP Pro SP3) has one LAN card, and is connected to LAN card B of the server so that it has access to the internet. The IP address on the LAN cards are defined as follows: Server: LAN card A: 192.168.0.3/24 (manually defined by me) LAN card B: 192.168.0.1/24 (manually defined by Internet Connection Sharing) Client: LAN card: 192.168.0.123/24 (assigned by DHCP) Default gateway: 192.168.0.1 From the server, I can ping 192.168.0.123 successfully. From the client, it can access the internet without any problem. I can also ping 192.168.0.1 successfully but for 192.168.0.3, it failed with the Request Timeout error message. Why did the ping fail, and what should be done to make the ping possible? (all firewalls have been turned off.)

  Read the article

• In ufw is there any way to disable logging for a particular rule?

  - by thomasrutter

  I am using UFW with a default logging policy of "low". I would like to keep this logging on for the default deny action, but disable it for a particular IP address only. So I'd like to create one particular new rule that doesn't have logging. Is there a way to achieve this? I have a rather uncomplicated ufw setup so far, like this: Status: active Logging: on (low) Default: deny (incoming), allow (outgoing) New profiles: skip To Action From -- ------ ---- 22/tcp LIMIT Anywhere 80/tcp ALLOW Anywhere 443/tcp ALLOW Anywhere 22/tcp ALLOW Anywhere (v6) 80/tcp ALLOW Anywhere (v6) 443/tcp ALLOW Anywhere (v6)

  Read the article

• does heartbeat v3 support same resource agent types of pacemaker?

  - by Emre He

  As we know, Pacemaker supports three types of Resource Agents, ? LSB Resource Agents, ? OCF Resource Agents, ? legacy Heartbeat Resource Agents http://www.linux-ha.org/wiki/Resource_Agents does heartbeat v3 support above 3 types resource agent? or it only support LSB and legacy heartbeat resource agents? because we have only virtual ip and one service need to switch in ha cluster, so we decide not involve pacemaker, so we come to this question, for example we cannot monitor the application service by heartbeat, heartbeat only can handle to start it on active node. thanks, Emre

  Read the article

• Configure apache to reverse proxy for specific name

  - by Phrogz

  I have a working intranet server that: Properly serves some content from http://hqmktgwb01/ Is currently properly configured to reverse proxy from http://hqmktgwb01/dashstats to a round-robin of localhost:3000 - localhost:3003 Also has the DNS name dashstats (going to the same IP) The current working configuration file can be found here: http://pastie.org/1426082 I would like to modify the configuration so that:    4. http://dashstats/ performs the same reverse proxying http://hqmktgwb01/dashstats. I (naively) modified the config like this: http://pastie.org/1426047 (added lines 90-98) but this is not a valid Apache config. Please help me to modify the original config file to accomplish 1-4 above.

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• securing server to server http post

  - by ad-inf

  Website is developed on JSF, Servlet, using apache web server. In my website, I accept data submission from few restricted websites using HTTP POST method. We exchange some secure key to ensure that correct source is sending data. But is there any way to ensure that the data is submitted from specific domain / IP address only? In application level I can check request.header('Referer') , but some proxy or firewall might hide the referer. Can this configuration done on firewall or webserver level to authenticate server to server communication? Eg. Say my website is a payment gateway website, integrated with www.abc.com. I want only abc.com to submit data. So a user using abc.com should be able to submit data to my website only through abc.com, and not any other website.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• What is the best way to configure Apache or AWS to support a Rails multi tenancy application that allows each customer to have their own domain name?

  - by Ryan Arneson

  I'm building a Rails 3 SaaS site that allows for multi-tenancy. When a customer signs up they put in their own domain name, e.g. example.com. I need example.com to point to my SaaS application and serve them their content. My questions are as follows: Do I need to create an Apache vhost for each customer using their own domain? Is there an easier way with CNAME's to just have the customer point to the IP address of my server(s) that then forwards the request onto my application through some catch all vhost? Would I be able to create the CNAME record for the customer so they don't have to do any setup? Would this be a case better suited to Amazon Web Services? Any help or explanation or corrections on my understanding of dns would be appreciated. I'm a developer so the server ops portion of this is a bit cloudy.

  Read the article

• Confusion about TCP packet analysis terms

  - by Berkay

  I'm analyzing our network and have some confusion about the terms: this is the 2-packet output from source to destination. from these i have to get some features as describe, pls make me clear... packets with at least a bytes of TCP data payload: it seems tcp.len0; The minimum segment size (confusion is headers are included or or not) The average segment size observed during the lifetime of the connection, the definition: is calculated as the value reported in the actual data bytes divided by the actual data pkts reported. Total bytes in IP packets, should be ip_len value. Total bytes in (Ethernet) The total number of bytes sent probably related to frame.len and frame.cap_len these two terms are describes as, also make me clear about these two terms. frame.cap_len: Frame length stored into the capture file frame.len: Frame length on the wire

  Read the article

• DNS server failure when forwarding

  - by Abraham Katz

  I run Bind 9 on a Ubuntu 12.04 server. I want this server to be a sort of a "wrapper" over my default server, so that it will respond to "domain_name.My_TLD" itself and forward requests to any other request. The server resides in a domain (Disconnected from the internet), so I configured it to zone "company_domain."{ type forward; forwarders { 1.2.3.4 }; #the DC's ip }; When i query it about sommething.company_domain. it sends a query to the DC and gets a response, but it returns "server failure". What can cause that? Cheers, Abraham

  Read the article

• Setup asp.net mvc application as subdomain website

  - by a_m0d

  I'm trying to setup a local application on a subdomain on our company server. There is already an installation of sharepoint running on http://companyweb/, but I would like my application to run on http://orders.companyweb/. I tried creating a new website, leaving the IP address the same as it is for http://companyweb, and just changing the host header value to orders.companyweb. However, no matter where I try to access the site from (different computers around the network, including the server itself), I keep getting 404 errors. I then tried setting up a simple index.html and serving that up as the highest priority; however, I still got 404 errors. This makes me think that I have actually setup the site itself wrong. What should I change to be able to access this application correctly on all the local computers?

  Read the article

• Connected 2 routers, but they won't talk

  - by ekolis

  I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

  Read the article

• How do I connect to my wireless router settings on Linux?

  - by Joshua Robison

  My network is as follows: Internet Provider's DSL modem connected to Internet Provider's router connected to My Buffalo Wireless router connected to My Toshiba Laptop via WEP network My Toshiba Laptop is running LMDE Linux Mint Debian Edition Service Pack 3 i686 kernel I have experience using various routers and their configuration settings but for some reason I can not access my wireless router. In my cromium browser I tried the following ip addresses: Standard Usual IPs : 192.168.1.1, 192.168.0.1 (connection hangs and goes no where) On the back of my router: 192.168.11.1, 192.168.11.100 (connection hangs and goes nowhere ) In some tcpip info: 192.168.24.1 (unable to connect error message) If someone could give me some terminal commands that will help me find my wireless router address or some trouble shooting ideas, I would be very thankful.

  Read the article

• OpenDNS servers initial response is very slow

  - by Ben Collins

  I've got a Time Warner cable ISP package (RoadRunner), and the modem they gave me doesn't allow me to specify which DNS servers to use; it always uses whatever the upstream dhcp server gives it. I prefer to use OpenDNS on my home network, so i've configured a couple of my PCs manually in the Windows adapter settings for IPv4 such that their IP addresses are obtained via DHCP, but the DNS server settings are fixed to the OpenDNS server IPs. Now, when I startup Windows on these PCs, it always takes 2-3 minutes to start receiving responses from the DNS servers; any request before that times out. While not debilitating, this is quite annoying. Any ideas why this might be happening?

  Read the article

• Find DNS server automatically

  - by jdickson

  I've got a Windows 2012 server set up as a domain controller and DNS server in my basement. On my laptop, if I set it to use the IP address of my server as the DNS server, then it works as expected. The problem with that is that I use my laptop outside my home network and I need to switch it back to automatic. Setup is like this: ISP Router running DD-WRT Win 2012 DC/DNS and other network computers How can I have my laptop find the DNS server automatically instead of using my ISP's DNS servers?

  Read the article

• System 67 error scheduled task to transfer files

  - by grom

  Running directly on command line the batch script works. But when scheduled to run (Windows 2003 R2 server) as the local administrator, I get the following error: D:\ScadaExport\exported>ping 192.168.10.78 Pinging 192.168.10.78 with 32 bytes of data: Reply from 192.168.10.78: bytes=32 time=11ms TTL=61 Reply from 192.168.10.78: bytes=32 time=15ms TTL=61 Reply from 192.168.10.78: bytes=32 time=29ms TTL=61 Reply from 192.168.10.78: bytes=32 time=10ms TTL=61 Ping statistics for 192.168.10.78: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 10ms, Maximum = 29ms, Average = 16ms D:\ScadaExport\exported>net use Z: \\192.168.10.78\bar-pccommon\scada\ System error 67 has occurred. The network name cannot be found. Any ideas? Google is turning up nothing useful, just keep finding results relating to DNS etc, but using IP address here.

  Read the article

• How to set the hostname according to the DNS name on Ubuntu 9.10?

  - by tangens

  Motivation I have to manage a lot of virtual machines that I create by copying a template (VmWare image). Problem Now I have the problem that in the template the file /etc/hostname contains a given name that I want to change for each copy of the template. Facts The network interface is configured by DHCP. DNS entries exist. The system is a Ubuntu 9.10 server. Question I wonder if I can configure the template so that on startup it sets its hostname according to its DNS name. I could create an init script that parses the IP address, makes a DNS lookup and sets the hostname accordingly. But is there an easier way?

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >