Search Results

Search found 51109 results on 2045 pages for 'browser back button'.

Page 341/2045 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

  • How to prevent screen locking when lid is closed?

    - by Joe Casadonte
    I have Ubuntu 11.10 with Gnome 3 (no Unity), gnome-screen-saver has been removed and replaced with xscreensaver. The screensaver stuff all works fine -- no complaints there. When I close my laptop lid, even for a second, the screen locks (and the dialog box asking for my password is xscreensaver's). I'd like for this not to happen... Things I've tried/looked at already: xscreensaver settings - the "Lock Screen After" checkbox is not checked (though I've also tried it checked and set to 720 minutes) gconf-editor - apps -> gnome-screensaver -> lock_enabled is not checked System Settings - Power - "When the lid is closed" is set to "Do nothing" for both battery and A/C System Settings - Screen - Lock is "off" gconf-editor - apps -> gnome-power-manager -> buttons -> lid_ac && lid_battery are both set to "nothing" dconf-editor - apps -> org -> gnome -> desktop -> screensaver -> lock_enabled is not checked Output from: gsettings list-recursively org.gnome.settings-daemon.plugins.power: org.gnome.settings-daemon.plugins.power active true org.gnome.settings-daemon.plugins.power button-hibernate 'hibernate' org.gnome.settings-daemon.plugins.power button-power 'suspend' org.gnome.settings-daemon.plugins.power button-sleep 'suspend' org.gnome.settings-daemon.plugins.power button-suspend 'suspend' org.gnome.settings-daemon.plugins.power critical-battery-action 'hibernate' org.gnome.settings-daemon.plugins.power idle-brightness 30 org.gnome.settings-daemon.plugins.power idle-dim-ac false org.gnome.settings-daemon.plugins.power idle-dim-battery true org.gnome.settings-daemon.plugins.power idle-dim-time 10 org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing' org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing' org.gnome.settings-daemon.plugins.power notify-perhaps-recall true org.gnome.settings-daemon.plugins.power percentage-action 2 org.gnome.settings-daemon.plugins.power percentage-critical 3 org.gnome.settings-daemon.plugins.power percentage-low 10 org.gnome.settings-daemon.plugins.power priority 1 org.gnome.settings-daemon.plugins.power sleep-display-ac 600 org.gnome.settings-daemon.plugins.power sleep-display-battery 600 org.gnome.settings-daemon.plugins.power sleep-inactive-ac false org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'suspend' org.gnome.settings-daemon.plugins.power sleep-inactive-battery true org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'suspend' org.gnome.settings-daemon.plugins.power time-action 120 org.gnome.settings-daemon.plugins.power time-critical 300 org.gnome.settings-daemon.plugins.power time-low 1200 org.gnome.settings-daemon.plugins.power use-time-for-policy true gnome-settings-daemon is running: <~> $ ps -ef | grep gnome-settings-daemon 1000 1719 1645 0 19:37 ? 00:00:01 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1726 1 0 19:37 ? 00:00:00 /usr/lib/gnome-settings-daemon/gsd-printer 1000 1774 1645 0 19:37 ? 00:00:00 /usr/lib/gnome-settings-daemon/gnome-fallback-mount-helper Anything else I can check? Thanks!

    Read the article

  • Anti-Forgery Request Helpers for ASP.NET MVC and jQuery AJAX

    - by Dixin
    Background To secure websites from cross-site request forgery (CSRF, or XSRF) attack, ASP.NET MVC provides an excellent mechanism: The server prints tokens to cookie and inside the form; When the form is submitted to server, token in cookie and token inside the form are sent in the HTTP request; Server validates the tokens. To print tokens to browser, just invoke HtmlHelper.AntiForgeryToken():<% using (Html.BeginForm()) { %> <%: this.Html.AntiForgeryToken(Constants.AntiForgeryTokenSalt)%> <%-- Other fields. --%> <input type="submit" value="Submit" /> <% } %> This invocation generates a token then writes inside the form:<form action="..." method="post"> <input name="__RequestVerificationToken" type="hidden" value="J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP" /> <!-- Other fields. --> <input type="submit" value="Submit" /> </form> and also writes into the cookie: __RequestVerificationToken_Lw__= J56khgCvbE3bVcsCSZkNVuH9Cclm9SSIT/ywruFsXEgmV8CL2eW5C/gGsQUf/YuP When the above form is submitted, they are both sent to server. In the server side, [ValidateAntiForgeryToken] attribute is used to specify the controllers or actions to validate them:[HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult Action(/* ... */) { // ... } This is very productive for form scenarios. But recently, when resolving security vulnerabilities for Web products, some problems are encountered. Specify validation on controller (not on each action) The server side problem is, It is expected to declare [ValidateAntiForgeryToken] on controller, but actually it has be to declared on each POST actions. Because POST actions are usually much more then controllers, this is a little crazy Problem Usually a controller contains actions for HTTP GET and actions for HTTP POST requests, and usually validations are expected for HTTP POST requests. So, if the [ValidateAntiForgeryToken] is declared on the controller, the HTTP GET requests become invalid:[ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public class SomeController : Controller // One [ValidateAntiForgeryToken] attribute. { [HttpGet] public ActionResult Index() // Index() cannot work. { // ... } [HttpPost] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] public ActionResult PostAction2(/* ... */) { // ... } // ... } If browser sends an HTTP GET request by clicking a link: http://Site/Some/Index, validation definitely fails, because no token is provided. So the result is, [ValidateAntiForgeryToken] attribute must be distributed to each POST action:public class SomeController : Controller // Many [ValidateAntiForgeryToken] attributes. { [HttpGet] public ActionResult Index() // Works. { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction1(/* ... */) { // ... } [HttpPost] [ValidateAntiForgeryToken(Salt = Constants.AntiForgeryTokenSalt)] public ActionResult PostAction2(/* ... */) { // ... } // ... } This is a little bit crazy, because one application can have a lot of POST actions. Solution To avoid a large number of [ValidateAntiForgeryToken] attributes (one for each POST action), the following ValidateAntiForgeryTokenAttribute wrapper class can be helpful, where HTTP verbs can be specified:[AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)] public class ValidateAntiForgeryTokenWrapperAttribute : FilterAttribute, IAuthorizationFilter { private readonly ValidateAntiForgeryTokenAttribute _validator; private readonly AcceptVerbsAttribute _verbs; public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs) : this(verbs, null) { } public ValidateAntiForgeryTokenWrapperAttribute(HttpVerbs verbs, string salt) { this._verbs = new AcceptVerbsAttribute(verbs); this._validator = new ValidateAntiForgeryTokenAttribute() { Salt = salt }; } public void OnAuthorization(AuthorizationContext filterContext) { string httpMethodOverride = filterContext.HttpContext.Request.GetHttpMethodOverride(); if (this._verbs.Verbs.Contains(httpMethodOverride, StringComparer.OrdinalIgnoreCase)) { this._validator.OnAuthorization(filterContext); } } } When this attribute is declared on controller, only HTTP requests with the specified verbs are validated:[ValidateAntiForgeryTokenWrapper(HttpVerbs.Post, Constants.AntiForgeryTokenSalt)] public class SomeController : Controller { // GET actions are not affected. // Only HTTP POST requests are validated. } Now one single attribute on controller turns on validation for all POST actions. Maybe it would be nice if HTTP verbs can be specified on the built-in [ValidateAntiForgeryToken] attribute, which is easy to implemented. Submit token via AJAX The browser side problem is, if server side turns on anti-forgery validation for POST, then AJAX POST requests will fail be default. Problem For AJAX scenarios, when request is sent by jQuery instead of form:$.post(url, { productName: "Tofu", categoryId: 1 // Token is not posted. }, callback); This kind of AJAX POST requests will always be invalid, because server side code cannot see the token in the posted data. Solution The tokens are printed to browser then sent back to server. So first of all, HtmlHelper.AntiForgeryToken() must be called somewhere. Now the browser has token in HTML and cookie. Then jQuery must find the printed token in the HTML, and append token to the data before sending:$.post(url, { productName: "Tofu", categoryId: 1, __RequestVerificationToken: getToken() // Token is posted. }, callback); To be reusable, this can be encapsulated into a tiny jQuery plugin:/// <reference path="jquery-1.4.2.js" /> (function ($) { $.getAntiForgeryToken = function (tokenWindow, appPath) { // HtmlHelper.AntiForgeryToken() must be invoked to print the token. tokenWindow = tokenWindow && typeof tokenWindow === typeof window ? tokenWindow : window; appPath = appPath && typeof appPath === "string" ? "_" + appPath.toString() : ""; // The name attribute is either __RequestVerificationToken, // or __RequestVerificationToken_{appPath}. tokenName = "__RequestVerificationToken" + appPath; // Finds the <input type="hidden" name={tokenName} value="..." /> from the specified. // var inputElements = $("input[type='hidden'][name='__RequestVerificationToken" + appPath + "']"); var inputElements = tokenWindow.document.getElementsByTagName("input"); for (var i = 0; i < inputElements.length; i++) { var inputElement = inputElements[i]; if (inputElement.type === "hidden" && inputElement.name === tokenName) { return { name: tokenName, value: inputElement.value }; } } return null; }; $.appendAntiForgeryToken = function (data, token) { // Converts data if not already a string. if (data && typeof data !== "string") { data = $.param(data); } // Gets token from current window by default. token = token ? token : $.getAntiForgeryToken(); // $.getAntiForgeryToken(window). data = data ? data + "&" : ""; // If token exists, appends {token.name}={token.value} to data. return token ? data + encodeURIComponent(token.name) + "=" + encodeURIComponent(token.value) : data; }; // Wraps $.post(url, data, callback, type). $.postAntiForgery = function (url, data, callback, type) { return $.post(url, $.appendAntiForgeryToken(data), callback, type); }; // Wraps $.ajax(settings). $.ajaxAntiForgery = function (settings) { settings.data = $.appendAntiForgeryToken(settings.data); return $.ajax(settings); }; })(jQuery); In most of the scenarios, it is Ok to just replace $.post() invocation with $.postAntiForgery(), and replace $.ajax() with $.ajaxAntiForgery():$.postAntiForgery(url, { productName: "Tofu", categoryId: 1 }, callback); // Token is posted. There might be some scenarios of custom token. Here $.appendAntiForgeryToken() is provided:data = $.appendAntiForgeryToken(data, token); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); And there are scenarios that the token is not in the current window. For example, an HTTP POST request can be sent by iframe, while the token is in the parent window. Here window can be specified for $.getAntiForgeryToken():data = $.appendAntiForgeryToken(data, $.getAntiForgeryToken(window.parent)); // Token is already in data. No need to invoke $.postAntiForgery(). $.post(url, data, callback); If you have better solution, please do tell me.

    Read the article

  • Now Available &ndash; Windows Azure SDK 1.6

    - by Shaun
    Microsoft has just announced the Windows Azure SDK 1.6 and the Windows Azure Tools for Visual Studio 1.6. Now people can download the latest product through the WebPI. After you downloaded and installed the SDK you will find that The SDK 1.6 can be stayed side by side with the SDK 1.5, which means you can still using the 1.5 assemblies. But the Visual Studio Tools would be upgraded to 1.6. Different from the previous SDK, in this version it includes 4 components: Windows Azure Authoring Tools, Windows Azure Emulators, Windows Azure Libraries for .NET 1.6 and the Windows Azure Tools for Microsoft Visual Studio 2010. There are some significant upgrades in this version, which are Publishing Enhancement: More easily connect to the Windows Azure when publish your application by retrieving a publish setting file. It will let you configure some settings of the deployment, without getting back to the developer portal. Multi-profiles: The publish settings, cloud configuration files, etc. will be stored in one or more MSBuild files. It will be much easier to switch the settings between vary build environments. MSBuild Command-line Build Support. In-Place Upgrade Support.   Publishing Enhancement So let’s have a look about the new features of the publishing. Just create a new Windows Azure project in Visual Studio 2010 with a MVC 3 Web Role, and right-click the Windows Azure project node in the solution explorer, then select Publish, we will find the new publish dialog. In this version the first thing we need to do is to connect to our Windows Azure subscription. Click the “Sign in to download credentials” link, we will be navigated to the login page to provide the Live ID. The Windows Azure Tool will generate a certificate file and uploaded to the subscriptions those belong to us. Then we will download a PUBLISHSETTINGS file, which contains the credentials and subscriptions information. The Visual Studio Tool will generate a certificate and deployed to the subscriptions you have as the Management Certificate. The VS Tool will use this certificate to connect to the subscription in the next step. In the next step, I would back to the Visual Studio (the publish dialog should be stilling opened) and click the Import button, select the PUBLISHSETTINGS file I had just downloaded. Then all my subscriptions will be shown in the dropdown list. Select a subscription that I want the application to be published and press the Next button, then we can select the hosted service, environment, build configuration and service configuration shown in the dialog. In this version we can create a new hosted service directly here rather than go back to the developer portal. Just select the <Create New …> item in the hosted service. What we need to do is to provide the hosted service name and the location. Once clicked the OK, after several seconds the hosted service will be established. If we went to the developer portal we will find the new hosted service in my subscription. a) Currently we cannot select the Affinity Group when create a new hosted service through the Visual Studio Publish dialog. b) Although we can specify the hosted service name and DNS prefixing through the developer portal, we cannot do so from the VS Tool, which means the DNS prefixing would be the same as what we specified for the hosted service name. For example, we specified our hosted service name as “Sdk16Demo”, so the public URL would be http://sdk16demo.cloudapp.net/. After created a new hosted service we can select the cloud environment (production or staging), the build configuration (release or debug), and the service configuration (cloud or local). And we can set the Remote Desktop by check the related checkbox as well. One thing should be note is that, in this version when we set the Remote Desktop settings we don’t need to specify a certificate by default. This is because the Visual Studio will generate a new certificate for us by default. But we can still specify an existing certificate for RDC, by clicking the “More Options” button. Visual Studio Tool will create another certificate for the Remote Desktop connection. It will NOT use the certificate that managing the subscription. We also can select the “Advanced Settings” page to specify the deployment label, storage account, IntelliTrace and .NET profiling information, etc.. Press Next button, the dialog will display all settings I had just specified and it will save them as a new profile. The last step is to click the Publish button. Since we enabled the Remote Desktop feature, the first step of publishing was uploading the certificate. And then it will verify the storage account we specified and upload the package, then finally created the website in Windows Azure.   Multi-Profiles After published, if we back to the Visual Studio we can find a AZUREPUBXML file under the Profiles folder in the Azure project. It includes all settings we specified before. If we publish this project again, we can just use the current settings (hosted service, environment, RDC, etc.) from this profile without input them again. And this is very useful when we have more than one deployment settings. For example it would be able to have one AZUREPUBXML profile for deploying to testing environment (debug building, less roles with RDC and IntelliTrace) and one for production (release building, more roles but without IntelliTrace).   In-Place Upgrade Support Let’s change some codes in the MVC pages and click the Publish menu from the azure project node. No need to specify any settings,  here we can use the pervious settings by loading the azure profile file (AZUREPUBXML). After clicked the Publish button the VS Tool brought a dialog to us to indicate that there’s a deployment available in the hosted service environment, and prompt to REPLACE it or not. Notice that in this version, the dialog tool said “replace” rather than “delete”, which means by default the VS Tool will use In-Place Upgrade when we deploy to a hosted service that has a deployment already exist. After click Yes the VS Tool will upload the package and perform the In-Place Upgrade. If we back to the developer portal we can find that the status of the hosted service was turned to “Updating…”. But in the previous SDK, it will try to delete the whole deployment and publish a new one.   Summary When the Microsoft announced the features that allows the changing VM size via In-Place Upgrade, they also mentioned that in the next few versions the user experience of publishing the azure application would be improved. The target was trying to accomplish the whole publish experience in Visual Studio, which means no need to touch developer portal any more. In the SDK 1.6 we can see from the new publish dialog, as a developer we can do the whole process, includes creating hosted service, specifying the environment, configuration, remote desktop, etc. values without going back the the developer portal.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Simple Hack To Install iOS 5 Beta On iPhone/iPad Without Developer Account

    - by Gopinath
    Apple released iOS 5 beta couple of days ago with loads of new features(watch the keynote video) . This beta version of iOS is available to iPhone developers who pay Apple $99 per annum. What if you are not a developer or not willing to pay $99 for a developer account but desperately looking for ways to upgrade your iPhone to iOS 5? Here is a simple hack to install iOS 5 beta without having a developer account.   1. Download iOS 5 installer with the help of Google or Torrent sites 2. Manually update your iPhone with the help of iTunes. Connect your phone to computer -click on Update button with Shift (PC) or Option (Mac) key pressed — Select the downloaded iOS 5 IPSW file and let the iTunes update your iPhone. 3. After update completes you see Activation screen. 4. Triple click the home button. This will activate the Voice Over. Again triple click the home button and Emergency Call option will appear. 5. Click the Emergency Call option and while it’s opening, swipe your three fingers down to open Notification Center 6. Click on the Weather widget. The Weather application will load. 7. Click on the home button. Bam!! Your iPhone is loaded with iOS 5. Note: Upgrade iPhone to iOS 5 at your own risk. You can’t blame us if something goes wrong. I know that you are aware of the side effects in using the hacks, but just reminding you once again . via Gizmodo This article titled,Simple Hack To Install iOS 5 Beta On iPhone/iPad Without Developer Account, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Multiple file upload with asp.net 4.5 and Visual Studio 2012

    - by Jalpesh P. Vadgama
    This post will be part of Visual Studio 2012 feature series. In earlier version of ASP.NET there is no way to upload multiple files at same time. We need to use third party control or we need to create custom control for that. But with asp.net 4.5 now its possible to upload multiple file with file upload control. With ASP.NET 4.5 version Microsoft has enhanced file upload control to support HTML5 multiple attribute. There is a property called ‘AllowedMultiple’ to support that attribute and with that you can easily upload the file. So what we are waiting for!! It’s time to create one example. On the default.aspx file I have written following. <asp:FileUpload ID="multipleFile" runat="server" AllowMultiple="true" /> <asp:Button ID="uploadFile" runat="server" Text="Upload files" onclick="uploadFile_Click"/> Here you can see that I have given file upload control id as multipleFile and I have set AllowMultiple file to true. I have also taken one button for uploading file.For this example I am going to upload file in images folder. As you can see I have also attached event handler for button’s click event. So it’s time to write server side code for this. Following code is for the server side. protected void uploadFile_Click(object sender, EventArgs e) { if (multipleFile.HasFiles) { foreach(HttpPostedFile uploadedFile in multipleFile.PostedFiles) { uploadedFile.SaveAs(System.IO.Path.Combine(Server.MapPath("~/Images/"),uploadedFile.FileName)); Response.Write("File uploaded successfully"); } } } Here in the above code you can see that I have checked whether multiple file upload control has multiple files or not and then I have save that in Images folder of web application. Once you run the application in browser it will look like following. I have selected two files. Once I have selected and clicked on upload file button it will give message like following. As you can see now it has successfully upload file and you can see in windows explorer like following. As you can see it’s very easy to upload multiple file in ASP.NET 4.5. Stay tuned for more. Till then happy programming. P.S.: This feature is only supported in browser who support HTML5 multiple file upload. For other browsers it will work like normal file upload control in asp.net.

    Read the article

  • Schedule Auto Send & Receive in Microsoft Outlook

    - by Mysticgeek
    If you use Outlook as your email client, you might want to schedule how often it checks for new messages. Today we show you how to schedule how often auto send/receive occurs. If you’re busy during the day and need to keep up with your emails, you might want want Outlook to check for new messages every few minutes. Here we’ll show how to schedule it in Office 2010, 2007, and 2003 for a busy inbox where you want to keep on top of your important emails. Outlook 2010 To schedule Auto Send/Receive in Outlook 2010, click on the File tab then Options. The Outlook Options window opens…click on Advanced and scroll down to Send and receive and click on the Send/Receive button. In the Send/Receive Groups window under Setting for group “All Accounts” check the box Schedule an automatic send/receive every…minutes. It is set to 30 minutes by default and you can change the minutes to whatever you want it to be. If you’re busy and want to keep up with your messages you can go as low as every one minute. You can also get to the Send/Receive groups by selecting Send/Receive tab on the Ribbon and then Define Send/Receive Groups. Outlook 2007 To select the send/receive time intervals in Outlook 2007, open Outlook and click on Tools \ Options. Click on the Mail Setup tab, check the box next to Send immediately when connected then the Send/Receive button.   Now change the schedule to automatically send/receive. You can also access the Send/Receive Groups section by going to Send/Receive > Send/Receive Settings and Define Send/Receive Groups. Outlook 2003 In Outlook 2003 click on Tool \ Options… Click on the Mail Setup tab then check Send immediately when connected, then the Send/receive button. Then set the amount of time between send/receive attempts. If you live out of Microsoft Outlook and want to keep up with messages, setting the automatic send/receive minutes will keep you up to date. Similar Articles Productive Geek Tips Force Outlook 2007 to Download Complete IMAP ItemsUse Hotmail from Microsoft OutlookClear the Auto-Complete Email Address Cache in OutlookIntegrate Twitter With Microsoft OutlookCreate an Email Template in Outlook 2003 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

    Read the article

  • 24+ Coda Alternatives for Windows and Linux

    - by Matt
    Coda plays an important role in designing layout on Mac. There are numerous coda alternatives for windows and Linux too. It is not possible to describe each and everyone so some of the coda alternatives, which work on both windows and Linux platforms, are discussed below. EditPlus $35.00 Good thing about EditPlus is that it highlights URLs and email addresses, activating them when you ‘crtl + double-click’. It also has a built in browser for previewing HTML, and FTP and SFTP support. Also supports Macros and RegEx find and replace. UltraEdit $49.99 It is another good coda alternative for windows and Linux. It is the best suited editor for text, HTML and HEX. It also plays an advanced PHP, Perl, Java and JavaScript editor for programmers. It supports disk-based 64-bit or standard file handling on 32-bit Windows platforms or window 2000 and later versions. HippoEdit $39.95 HippoEDIT has the best autocomplete it gives pop a ‘tooltip’ above your cursor as you type, suggesting words you’ve already typed. It does syntax highlighting for over 2 dozen language. Sublime Text $59.00 Sublime Text awesome ‘zoomed out’ view of the file lets you focus on the area you want. It lets you open a local file when you right-click on its link, and there are a few automation features, so this would make a solid choice of a text editor. Textpad $24.70 TextPad is simple editor with nifty features such as column select, drag-and-drop text between files, and hyperlink support. It also supports large files. Aptana Free Aptana Studio is one of the best editors working on both windows and Linux. It is a complete web development setting that has a nice blend of powerful authoring tools with a collection of online hosting and collaboration services. It is quite helpful as it support for PHP, CSS, FTP, and more. SciTE Free It is a SCIntilla based Text Editor. It has gradually developed as a generally useful editor. It provides for building and running programs. It is best to be used for jobs with simple configurations. SciTE is currently available for Intel Win32 and Linux compatible operating systems with GTK+. It has been run on Windows XP and on Fedora 8 and Ubuntu 7.10 with GTK+ 2.12 E Text Editor $34.96 E Text Editor is a new text editor for Windows, which also works on Linux as well. It has powerful editing features and also some unique abilities. It makes text manipulation quite fast and easy, and makes user focus on his writing as it automatically does all the manual work. It can be extend it in any language. It supports Text Mate bundles, thus allows the user to tap into a huge and active community. Editra Free Editra is an upcoming editor, with some fantastic features such as user profiles, auto-completion, session saving, and syntax highlighing for 60+ languages. Plugins can extend the feature set, offering an integrated python console, FTP client, file browser, and calculator, among others. PSPad Free PSPad is a good Template for writing CSS, as it an internal web browser, and a macro recorder to the table. It also supports hex editing, and some degree of code compiling. JEdit Free It is a mature programmer’s text editor and has taken a good deal of time to be developed as it is today. It is better than many costlier development tools due to its features and simplicity of use. It has been released as free software with full source code, provided under the terms of the GPL 2.0. Which also adds to its attractiveness. NEdit Free It is a multi-purpose text editor for the X Window System, which also works on Linux. It combines a standard, easy to use, graphical user interface with the full functionality and stability required by users who edit text for long period a day. It also provides for thorough support for development in various languages. It also facilitates the use of text processors, and other tools at the same time. It can be used productively by anyone who needs to edit text. It is quite a user-friendly tool. Its salient features include syntax highlighting with built in pattern, auto indent, tab emulation, block indentation adjustment etc. As of version 5.1, NEdit may be freely distributed under the terms of the GNU General Public License. MadEdit Free Mad Edit is an Open-Source and Cross-Platform Text/Hex Editor. It is written in C++ and wxWidgets. MadEdit can edit files in Text/Column/Hex modes. It also supports many useful functions, such as Syntax Highlighting, Word Wrap, Encoding for UTF8/16/32,and others. It also supports word count, which makes it quite a useful text editor for both windows and Linux. It has been recently modified on 10/09/2010. KompoZer Free Kompozer is a complete web authoring system that has a combination of web file management and easy-to-use WYSIWYG web page editing. KompoZer has been designed to be completely and extensively easy to use. It is thus an ideal tool for non-technical computer users who want to create an attractive, professional-looking web site without knowing HTML or web coding. It is based on the NVU source code. Vim Free Vim or “Vi IMproved” is an advanced text editor. Its salient features are syntax highlighting, word completion and it also has a huge amount of contributed content. Vim has several “modes” on offer for editing, which adds to the efficiency in editing. Thus it becomes a non-user-friendly application but it is also strength for its users. The normal mode binds alphanumeric keys to task-oriented commands. The visual mode highlights text. More tools for search & replace, defining functions, etc. are offered through command line mode. Vim comes with complete help. NotePad ++ Free One of the the best free text editor for Windows out there; with support for simple things—like syntax highlighting and folding—all the way up to FTP, Notepad++ should tick most of the boxes Notepad2 Free Notepad2 is also based on the Scintilla editing engine, but it’s much simpler than Notepad++. It bills itself as being fast, light-weight, and Notepad-like. Crimson Editor Free Crimson Editor has the ability to edit remote files, using a built-in FTP client; there’s also a spell checker. TotalEdit Free TotalEdit allows file comparison, RegEx search and replace, and has multiple options for file backup / versioning. For cleanup, it offers (X)HTML and XML customizable formatting, and a spell checker. In-Type Free ConTEXT Free SourceEdit Free SourceEdit includes features such as clipboard history, syntax highlighting and autocompletion for a decent set of languages. A hex editor and FTP client. RJ TextED Free RJ TextED supports integration with TopStyle Lite. Provides HTML validation and formatting. It includes an FTP client, a file browser, and a code browser, as well as a character map and support for email. GEDIT Free It is one of the best coda alternatives for windows and Linux. It has syntax highlighting and is best suitable for programming. It has many attractive features such as full support for UTF-8, undo/redo, and clipboard support, search and replace, configurable syntax highlighting for various languages and many more supportive features. It is extensible with plug ins. Other important coda alternatives for windows and Linux are Redcar, Bluefish Editor, NVU, Ruby Mine, Slick Edit, Geany, Editra, txt2html and CSSED. There are many more. Its up to user to decide which one suits best to his requirements. Related posts:10 Useful Text Editor For Developer Applications to Install & Run Windows on Linux Open Source WYSIWYG Text Editors

    Read the article

  • Show #14 DotNetNuke 5.6.1, Razor/Webmatrix and WebCamps

    - by Chris Hammond
    Once again, it’s been far too long since the last show, this time just over 4 months, For Show #14 I am joined by Joe Brinkman. Take a listen and see what has been going on in the DNN world. Length: 47:56 Size: 43.8mb MP3 Download Welcome back to DNNVoice Welcome to guest Joe Brinkman ( http://blog.theaccidentalgeek.com/ ) Introduction to Joe and Welcome back from Chris Hammond ( http://www.chrishammond.com ) and what he's been doing DotNetNuke Training Free Extensions Module Development Templates...(read more)

    Read the article

  • Using jQuery Live instead of jQuery Hover function

    - by hajan
    Let’s say we have a case where we need to create mouseover / mouseout functionality for a list which will be dynamically filled with data on client-side. We can use jQuery hover function, which handles the mouseover and mouseout events with two functions. See the following example: <!DOCTYPE html> <html lang="en"> <head id="Head1" runat="server">     <title>jQuery Mouseover / Mouseout Demo</title>     <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.4.4.js"></script>     <style type="text/css">         .hover { color:Red; cursor:pointer;}     </style>     <script type="text/javascript">         $(function () {             $("li").hover(               function () {                   $(this).addClass("hover");               },               function () {                   $(this).removeClass("hover");               });         });     </script> </head> <body>     <form id="form2" runat="server">     <ul>         <li>Data 1</li>         <li>Data 2</li>         <li>Data 3</li>         <li>Data 4</li>         <li>Data 5</li>         <li>Data 6</li>     </ul>     </form> </body> </html> Now, if you have situation where you want to add new data dynamically... Lets say you have a button to add new item in the list. Add the following code right bellow the </ul> tag <input type="text" id="txtItem" /> <input type="button" id="addNewItem" value="Add New Item" /> And add the following button click functionality: //button add new item functionality $("#addNewItem").click(function (event) {     event.preventDefault();     $("<li>" + $("#txtItem").val() + "</li>").appendTo("ul"); }); The mouse over effect won't work for the newly added items. Therefore, we need to use live or delegate function. These both do the same job. The main difference is that for some cases delegate is considered a bit faster, and can be used in chaining. In our case, we can use both. I will use live function. $("li").live("mouseover mouseout",   function (event) {       if (event.type == "mouseover") $(this).addClass("hover");       else $(this).removeClass("hover");   }); The complete code is: <!DOCTYPE html> <html lang="en"> <head id="Head1" runat="server">     <title>jQuery Mouseover / Mouseout Demo</title>     <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.4.4.js"></script>     <style type="text/css">         .hover { color:Red; cursor:pointer;}     </style>     <script type="text/javascript">         $(function () {             $("li").live("mouseover mouseout",               function (event) {                   if (event.type == "mouseover") $(this).addClass("hover");                   else $(this).removeClass("hover");               });             //button add new item functionality             $("#addNewItem").click(function (event) {                 event.preventDefault();                 $("<li>" + $("#txtItem").val() + "</li>").appendTo("ul");             });         });     </script> </head> <body>     <form id="form2" runat="server">     <ul>         <li>Data 1</li>         <li>Data 2</li>         <li>Data 3</li>         <li>Data 4</li>         <li>Data 5</li>         <li>Data 6</li>     </ul>          <input type="text" id="txtItem" />     <input type="button" id="addNewItem" value="Add New Item" />     </form> </body> </html> So, basically when replacing hover with live, you see we use the mouseover and mouseout names for both events. Check the working demo which is available HERE. Hope this was useful blog for you. Hope it’s helpful. HajanReference blog: http://codeasp.net/blogs/hajan/microsoft-net/1260/using-jquery-live-instead-of-jquery-hover-function

    Read the article

  • Problems with updates

    - by legospace9876
    I can not update Weather Indicator with Update Manager. This is the terminal log: installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "sr_RS.utf_8_latin" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "sr_RS.utf_8_latin" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "sr_RS.utf_8_latin" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "sr_RS.utf_8_latin" are supported and installed on your system. perl: warning: Falling back to the andard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up indicator-weather (11.11.28-0ubuntu1.1) ... Installing indicator-specific icons... Installing indicator dconf schema... cp: cannot stat `/usr/share/indicator-weather/indicator-weather.gschema.xml': No such file or directory dpkg: error processing indicator-weather (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: indicator-weather Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up indicator-weather (11.11.28-0ubuntu1.1) ... Installing indicator-specific icons... Installing indicator dconf schema... cp: cannot stat `**/usr/share/indicator-weather/indicator-weather.gschema.xml**': No such file or directory dpkg: error processing indicator-weather (--configure): subprocess installed post-installation script returned error exit status 1 The file that I bold really does not exist. How can I solve this problem?

    Read the article

  • What strategies you followed to keep your programming skills fresh during a long break?

    - by TRoh
    After being away from development for more than a year, I find it challenging to join back the work force, and I can feel the rustiness. I wonder what you have done to either keep your skills fresh during such periods or how you gained back the skills you might have forgotten? I understand coding is a great way to become more competent, but how do you start getting more involved in it while you are not working as a developer?

    Read the article

  • Combination of Operating Mode and Commit Strategy

    - by Kevin Yang
    If you want to populate a source into multiple targets, you may also want to ensure that every row from the source affects all targets uniformly (or separately). Let’s consider the Example Mapping below. If a row from SOURCE causes different changes in multiple targets (TARGET_1, TARGET_2 and TARGET_3), for example, it can be successfully inserted into TARGET_1 and TARGET_3, but failed to be inserted into TARGET_2, and the current Mapping Property TLO (target load order) is “TARGET_1 -> TARGET_2 -> TARGET_3”. What should Oracle Warehouse Builder do, in order to commit the appropriate data to all affected targets at the same time? If it doesn’t behave as you intended, the data could become inaccurate and possibly unusable.                                               Example Mapping In OWB, we can use Mapping Configuration Commit Strategies and Operating Modes together to achieve this kind of requirements. Below we will explore the combination of these two features and how they affect the results in the target tables Before going to the example, let’s review some of the terms we will be using (Details can be found in white paper Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide11g Release 2): Operating Modes: Set-Based Mode: Warehouse Builder generates a single SQL statement that processes all data and performs all operations. Row-Based Mode: Warehouse Builder generates statements that process data row by row. The select statement is in a SQL cursor. All subsequent statements are PL/SQL. Row-Based (Target Only) Mode: Warehouse Builder generates a cursor select statement and attempts to include as many operations as possible in the cursor. For each target, Warehouse Builder inserts each row into the target separately. Commit Strategies: Automatic: Warehouse Builder loads and then automatically commits data based on the mapping design. If the mapping has multiple targets, Warehouse Builder commits and rolls back each target separately and independently of other targets. Use the automatic commit when the consequences of multiple targets being loaded unequally are not great or are irrelevant. Automatic correlated: It is a specialized type of automatic commit that applies to PL/SQL mappings with multiple targets only. Warehouse Builder considers all targets collectively and commits or rolls back data uniformly across all targets. Use the correlated commit when it is important to ensure that every row in the source affects all affected targets uniformly. Manual: select manual commit control for PL/SQL mappings when you want to interject complex business logic, perform validations, or run other mappings before committing data. Combination of the commit strategy and operating mode To understand the effects of each combination of operating mode and commit strategy, I’ll illustrate using the following example Mapping. Firstly we insert 100 rows into the SOURCE table and make sure that the 99th row and 100th row have the same ID value. And then we create a unique key constraint on ID column for TARGET_2 table. So while running the example mapping, OWB tries to load all 100 rows to each of the targets. But the mapping should fail to load the 100th row to TARGET_2, because it will violate the unique key constraint of table TARGET_2. With different combinations of Commit Strategy and Operating Mode, here are the results ¦ Set-based/ Correlated Commit: Configuration of Example mapping:                                                     Result:                                                      What’s happening: A single error anywhere in the mapping triggers the rollback of all data. OWB encounters the error inserting into Target_2, it reports an error for the table and does not load the row. OWB rolls back all the rows inserted into Target_1 and does not attempt to load rows to Target_3. No rows are added to any of the target tables. ¦ Row-based/ Correlated Commit: Configuration of Example mapping:                                                   Result:                                                  What’s happening: OWB evaluates each row separately and loads it to all three targets. Loading continues in this way until OWB encounters an error loading row 100th to Target_2. OWB reports the error and does not load the row. It rolls back the row 100th previously inserted into Target_1 and does not attempt to load row 100 to Target_3. Then, if there are remaining rows, OWB will continue loading them, resuming with loading rows to Target_1. The mapping completes with 99 rows inserted into each target. ¦ Set-based/ Automatic Commit: Configuration of Example mapping: Result: What’s happening: When OWB encounters the error inserting into Target_2, it does not load any rows and reports an error for the table. It does, however, continue to insert rows into Target_3 and does not roll back the rows previously inserted into Target_1. The mapping completes with one error message for Target_2, no rows inserted into Target_2, and 100 rows inserted into Target_1 and Target_3 separately. ¦ Row-based/Automatic Commit: Configuration of Example mapping: Result: What’s happening: OWB evaluates each row separately for loading into the targets. Loading continues in this way until OWB encounters an error loading row 100 to Target_2 and reports the error. OWB does not roll back row 100th from Target_1, does insert it into Target_3. If there are remaining rows, it will continue to load them. The mapping completes with 99 rows inserted into Target_2 and 100 rows inserted into each of the other targets. Note: Automatic Correlated commit is not applicable for row-based (target only). If you design a mapping with the row-based (target only) and correlated commit combination, OWB runs the mapping but does not perform the correlated commit. In set-based mode, correlated commit may impact the size of your rollback segments. Space for rollback segments may be a concern when you merge data (insert/update or update/insert). Correlated commit operates transparently with PL/SQL bulk processing code. The correlated commit strategy is not available for mappings run in any mode that are configured for Partition Exchange Loading or that include a Queue, Match Merge, or Table Function operator. If you want to practice in your own environment, you can follow the steps: 1. Import the MDL file: commit_operating_mode.mdl 2. Fix the location for oracle module ORCL and deploy all tables under it. 3. Insert sample records into SOURCE table, using below plsql code: begin     for i in 1..99     loop         insert into source values(i, 'col_'||i);     end loop;     insert into source values(99, 'col_99'); end; 4. Configure MAPPING_1 to any combinations of operating mode and commit strategy you want to test. And make sure feature TLO of mapping is open. 5. Deploy Mapping “MAPPING_1”. 6. Run the mapping and check the result.

    Read the article

  • How to Easily Put a Windows PC into Kiosk Mode With Assigned Access

    - by Chris Hoffman
    Windows 8.1′s Assigned Access feature allows you to easily lock a Windows PC to a single application, such as a web browser. This feature makes it easy for anyone to configure Windows 8.1 devices as point-of-sale or other kiosk systems. In the past, setting up a Windows PC in kiosk mode involved much more work, requiring the use of third-party software, group policy, or Linux distributions designed around kiosk mode. Assigned Access is available on Windows 8.1 RT, Windows 8.1 Professional, and Windows 8.1 Enterprise. The standard edition of Windows 8.1 doesn’t support Assigned Access. Create a User Account for Assigned Access Rather than turn your entire computer into a locked-down kiosk system, Assigned Access allows you to create a separate user account that can only launch a single app — such as a web browser. To set this up, you must be logged into Windows as a user with administrator permissions. First, open the PC settings app — swipe in from the right or press Windows Key + C to open the charms bar, tap Settings, and tap Change PC settings. In the PC settings app, select Accounts and select Other accounts. Use the Add an account button to create a new Windows account. Select  the “Sign in without a Microsoft account” option and select Local account to create a local user account. You could also create a Microsoft account, but you may not want to do this if you just want a locked-down account with only browser access. If you need to install apps from the Windows Store to use in Assigned Access mode, you’ll have to set up a Microsoft account instead of a local account. A local account will still allow you access to the preinstalled apps, such as Internet Explorer. You may want to create a user account with a blank password. This would make it simple for anyone to access kiosk mode, even if the system becomes locked or needs to be rebooted. The account will be created as a standard user account with limited permissions. Leave it as a standard user account — don’t make it an administrator account. Set Up Assigned Access Once you’ve created an account, you’ll first need to sign into it. If you don’t, you’ll see a “This account has no apps” message when trying to enable Assigned Access. Go back to the welcome screen, log in to the new account you created, and allow Windows to go through the first-time account setup process. If you want to use a non-default app in kiosk mode, install it while logged in as that user account. Once you’re done, log out of the other account, log back in as your administrator account, and go back to the Other accounts screen. Click the Set up an account for assigned access option to continue. Select the user account you created and select the app you want to limit the account to. For a web-based kiosk, this can be a web browser such as the Modern version of Internet Explorer. Businesses can also create their own Modern apps and set them to run in kiosk mode in this way. Note that Microsoft’s documentation says “web browsers are not good choices for assigned access” because they require more permissions than average Modern (or “Windows Store”) apps. However, if you want to provide a kiosk for web-browsing, using Assigned Access is a much better option than using Guest Mode and offering up a full Windows desktop. When you’re done, restart your PC and log in as the Assigned Access account. Windows will automatically open the app you chose and won’t allow a user to leave that app. Standard Windows 8 features like the charms bar, app switcher, and Start screen won’t appear. Pressing the Windows key once will do nothing. To sign out of Assigned Access mode, press the Windows key five times — quickly — while signed in. You’ll be sent back to the standard login screen. The account will actually still be logged in and the app will remain running — this method just “locks” the screen and allows another user to log in. Automatically Log Into Assigned Access Whenever your Windows device boots, you can log into the Assigned Access account and turn it into a kiosk system. While this isn’t ideal for all kiosk systems, you may want the device to automatically launch the specific app when it boots without requiring any login process. To do so, you’ll just need to have Windows automatically log into the Assigned Access account when it boots. This option is hidden and not available in the standard Control Panel. You’ll need to use the hidden netplwiz Control Panel tool to set up automatic login on boot. If you didn’t create a password for the user account, leave the Password field empty while configuring this. Security Considerations If you’re using this feature to turn a Windows 8.1 system into a kiosk and leaving it open to the public, remember to consider security. Anyone could come up to the system, press the Windows key five times, and try to log into your standard administrator user account. Ensure the administrator user account has a strong password so people won’t be able to get past the kiosk system’s limitations and tamper with the system. Even Windows 8′s detractors have to admit that it’s an ideal system for a touch-screen kiosk device, running either a browser or another specific application. Assigned Access finally makes this easy to set up on Windows systems in the real world — no IT experience, third-party software, or Linux distributions necessary.     

    Read the article

  • ubuntu wont boot,, frozen at boot manager

    - by user93417
    im running ubuntu desktop 12.04, and well, i have no idea what happened. my computer lost power and died, and when i plugged it in and powered back on it took me to the sign in page and froze. i turned the computer off again and powered back on, this time hitting f2 and going to boot options, and the boot options page is frozen. ive powered up and down and tried a few times, all i get is a frozen boot options screen any ideas?

    Read the article

  • SharePoint, HTTP Modules, and Page Validation

    - by Damon Armstrong
    Sometimes I really believe that SharePoint actively thwarts my attempts to get it to do what I want.  First you look at something and say, wow, that should work.  Then you realize it doesn’t.  Then you have an epiphany and see a workaround.  And when you almost have that work around working… well then SharePoint says no again.  Then it’s off on another whirl-wind adventure to find a work around for the workaround.  I had one of those issues today, but I think I finally got past the last roadblock. So, I was writing an HTTP module as a workaround for another problem.  Everything looked like it was working great because I had been slowly adding code into the HTTP module bit by bit in a prototyping effort.  Finally I put in the last bit of code in place… and I started to get an error: “The security validation for this page is invalid. Click Back in your Web browser, refresh the page, and try your operation again.” This is not an uncommon error – it normally occurs when you are updating an item on a GET request and you have not marked the web containing the item with AllowUnsafeUpdates.  One issue, however, is that I wasn’t updating anything in my code.  I was, however, getting an SPWeb object so I decided to set the AllowUnsafeUpdates property on it to true for good measure. Once that was in place, I ran it again… “The security validation for this page is invalid. Click Back in your Web browser, refresh the page, and try your operation again.” WTF?!?!  I really expected that setting the AllowUnsafeUpdates property on the SPWeb would fix the issue, but clearly that was not the case.  I have had occasion to disassemble some SharePoint code with .NET Reflector in the past, and one of the things SharePoint abuses a bit more than it should is the HttpContext.  One way to avoid this abuse is to clear out the HttpContext while your code runs and then set it back once you are done.  I tried this next, and everything worked out just like I had expected.  So, if you are building an HTTP Module for SharePoint and some code that you are running ends up giving you a security validation error, remember to try running that code with AllowUnsafeUpdates turned on and try running the code with the HttpContext nulled out (just remember to set it back after your code runs or else you’ll really jack things up).

    Read the article

  • How to fix the "Setting locale failed" error while installing vim?

    - by user211775
    When installing vim through Software Center , I get this error installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: install-info Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1

    Read the article

  • HTML5 Input type=date Formatting Issues

    - by Rick Strahl
    One of the nice features in HTML5 is the abililty to specify a specific input type for HTML text input boxes. There a host of very useful input types available including email, number, date, datetime, month, number, range, search, tel, time, url and week. For a more complete list you can check out the MDN reference. Date input types also support automatic validation which can be useful in some scenarios but maybe can get in the way at other times. One of the more common input types, and one that can most benefit of a custom UI for selection is of course date input. Almost every application could use a decent date representation and HTML5's date input type seems to push into the right direction. It'd be nice if you could just say:<form action="DateTest.html"> <label for="FromDate">Enter a Date:</label> <input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> <hr /> <input type="submit" id="btnSubmit" name="btnSubmit" value="Save Date" class="smallbutton" /> </form> but if you'd expect to just work, you're likely to be pretty disappointed. Problem #1: Browser Support For starters there's browser support. Out of the major browsers only the latest versions of WebKit and Opera based browsers seem to support date input. Neither FireFox, nor any version of Internet Explorer (including the new touch enabled IE10 in Windows RT) support input type=date. Browser support is an issue, but it would be OK if it wasn't for problem #2. Problem #2: Date Formatting If you look at my date input from before:<input type="date" id="FromDate" name="FromDate" value="11/08/2012" class="date" /> You can see that my date is formatted in local date format (ie. en-us). Now when I run this sadly the form that comes up in Chrome (and also iOS mobile browsers) comes up like this: Chrome isn't recognizing my local date string. Instead it's expecting my date format to be provided in ISO 8601 format which is: 2012-11-08 So if I change the date input field to:<input type="date" id="FromDate" name="FromDate" value="2012-10-08" class="date" /> I correctly get the date field filled in: Also when I pick a date with the DatePicker the date value is also returned is also set to the ISO date format. Yet notice how the date is still formatted to the local date time format (ie. en-US format). So if I pick a new date: and then save, the value field is set back to: 2012-11-15 using the ISO format. The same is true for Opera and iOS browsers and I suspect any other WebKit style browser and their date pickers. So to summarize input type=date: Expects ISO 8601 format dates to display intial values Sets selected date values to ISO 8601 Now what? This would sort of make sense, if all browsers supported input type=date. It'd be easy because you could just format dates appropriately when you set the date value into the control by applying the appropriate culture formatting (ie. .ToString("yyyy-MM-dd") ). .NET is actually smart enough to pick up the date on the other end for modelbinding when ISO 8601 is used. For other environments this might be a bit more tricky. input type=date is clearly the way to go forward. Date controls implemented in HTML are going the way of the dodo, given the intricacies of mobile platforms and scaling for both desktop and mobile. I've been using jQuery UI Datepicker for ages but once going to mobile, that's no longer an option as the control doesn't scale down well for mobile apps (at least not without major re-styling). It also makes a lot of sense for the browser to provide this functionality - creating a consistent date input experience across apps only makes sense, which is why I find it baffling that neither FireFox nor IE 10 deign it necessary to support date input natively. The problem is that a large number of even the latest and greatest browsers don't support this. So now you're stuck with not knowing what date format you have to serve since neither the local format, nor the ISO format works in all cases. For my current app I just broke down and used the ISO format and so I'll live with the non-local date format. <input type="date" id="ToDate" name="ToDate" value="2012-11-08" class="date"/> Here's what this looks like on Chrome: Here's what it looks like on my iPhone: Both Chrome and the phone do this the way it should be. For the phone especially this demonstrates why we'd want this - the built-in date picker there certainly beats manually trying to edit the date using finger gymnastics, and it's one of the easiest ways to pick a date I can think of (ie. easier to use than your typical date picker). Finally here's what the date looks like in FireFox: Certainly this is not the ideal date format, but it's clear enough I suppose. If users enter a date in local US format and that works as well (but won't work for other locales). It'll have to do. Over time one can only hope that other browsers will finally decide to implement this functionality natively to provide a unique experience. Until then, incomplete solutions it is. Related Posts Html 5 Input Types - How useful is this really going to be?© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  HTML   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Use of Business Parameters in BPM12c

    - by Abhishek Mittal-Oracle
    With the release of BPM12c, a new feature to use Business Parameters is introduced through which we can define a business parameter which will behave as a global variable which can be used within BPM project. Business Administrator can be the one responsible to modify the business parameters value dynamically at run-time which may bring change in BPM process flow where it is used.This feature was a part of BPM10g product and was extensively used. In BPM11g, this feature is not present currently.Business Parameters can be defined in 2 ways:1. Using Jdev to define business parameters, and 2. Using BPM workspace to define business parameters.It is important to note that business parameters need to be mapped with a valid organisation unit defined in a BPM project. If the same is not handled, exceptions like 'BPM-70702' will be thrown by BPM Engine. This is because business parameters work along with organisation defined in a BPM project.At the same time, we can use same business parameter across different organisation units with different values. Business Parameters in BPM12c has this capability to handle multiple values with different organisation units defined in a single BPM project. This enables business to re-use same business parameters defined in a BPM project across different organisations.Business parameters can be defined using the below data types:1. int2. string 3. boolean4. double While defining an business parameter, it is mandatory to provide a default value. Below are the steps to define a business parameter in Jdev: Step 1:  Open 'Organization' and click on 'Business Parameters' tab.Step 2:  Click on '+' button.Step 3: Add business parameter name, type and provide default value(mandatory).Step 4: Click on 'OK' button.Step 5: Business parameter is defined. Below are the steps to define a business parameter in BPM workspace: Step 1: Login to BPM workspace using admin-username and password.Step 2: Click on 'Administration' on the right top side of workspace.Step 3: Click on 'Business Parameters' in the left navigation panel under 'Organization'. Step 4:  Click on '+' button.Step 5: Add business parameter name, type and provide default value(mandatory).Step 6: Click on 'OK' button.Step 7: Business parameter is defined. Note: As told earlier in the blog, it is necessary to define and map a valid organization ID with predefined variable 'organizationalUnit' under data associations in an BPM process before the business parameter is used. I have created one sample PoC demonstrating the use of Business Parameters in BPM12c and it can be found here.

    Read the article

  • What bots are really worth letting onto a site?

    - by blunders
    Having written a number of bots, and seen the massive amounts of random bots that happen to crawl a site, I am wondering if the goal of the site allowing bots is for the potential for the bot to send real traffic back to the site if there is any reason to allow bots that are not known to be sending real traffic back, and how to spot these "good" bots; based on how they ID themselves, IPs they come from, behaviors, etc.

    Read the article

  • Convert Chrome Bookmark Toolbar Folders to Icons

    - by Asian Angel
    So you have your regular bookmarks reduced to icons but what about the folders? With our little hack and a few minutes of your time you can turn those folders into icons too. Condensing the Folders Reducing bookmark folders to icons is a little more tricky than regular bookmarks but not hard to do. Right click on the folder and select “Rename…”. The folder’s name should already be highlighted/selected as shown here. Delete the text…notice that the “OK Button” has become unusable for the moment. Now what you will need to do is: Hold down the “Alt Key” Type in “0160” (without the quotes) using the numbers keypad on the right side of your keyboard Release the “Alt Key” after you have finished typing in the number above Once you have released the “Alt Key” you will notice two things…the “cursor” has moved further into the text area and you can now click on the “OK Button” again. There is our folder after editing. And it works just as well as before but without taking up so much room. Here is how our “iconized” folder looks next to our bookmarks. Perfect! What if you want to reduce multiple folders to icons? Perform the same exact steps shown above for each folder and pack your “Bookmarks Toolbar” full of folder goodness! As seen here the folders will have a little more space between them in comparison with singular bookmarks due to the “blank name” for each folder. For those who may be curious this is what your bookmarks will look like in the “Bookmark Manager Page”. Note: If you export your bookmarks all bookmarks contained in multiple blank name folders will be combined into a single folder. Conclusion With just a little bit of work you can pack a lot of goodness into your “Bookmarks Toolbar”. No more wasted space… Similar Articles Productive Geek Tips Condense the Bookmarks in the Firefox Bookmarks ToolbarAccess Your Bookmarks with a Toolbar Button in Google ChromeAdd the Bookmarks Menu to Your Bookmarks Toolbar with Bookmarks UI ConsolidatorAdd a Vertical Bookmarks Toolbar to FirefoxReduce Your Bookmarks Toolbar to a Toolbar Button TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

    Read the article

  • How to minimize a window using mouse in PCManFM?

    - by Mithun P
    How can I minimize a window using mouse in PCManFM? I'm using Elementary Desktop Environment in Ubuntu 12.04 Update I tried to bring the minimize button back by opening gconf-editor and change the value of /apps/metacity/general/button_layout from close:maximize to close,minimize:maximize. Then I logged out and back in, but that change was simply ignored. Update Again Screenshot And the System settings

    Read the article

  • More Great Improvements to the Windows Azure Management Portal

    - by ScottGu
    Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal.  These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately.  Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them.  You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it.  This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts.  You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it.  This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site.  After that, subsequent sites could only be created in that same region.  This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region.  This allows you to now deploy sites to North America, Europe and Asia simultaneously.  Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories).  Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role.  The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal.  This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab.  All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure.  Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server).  When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server.  You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code.  Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts.  To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners.  It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • INETA Speaking engagement, July 14, Ft. Wayne, IN.

    - by Enrique Lima
    A while back I decided to get back to speaking engagements and such. For the most part I had kept that to some local User Groups and some conferences like TechEd. I decided to sign up for the INETA Speaker program. Well my first gig came through. I will be speaking at the SharePoint Users of Ft. Wayne, Indiana meeting on July 14th. The topic is on Building Solutions for SharePoint using Visual Studio LightSwitch.

    Read the article

  • Boot Problem in Asus EEE PC 1015CX

    - by Sâmrat VikrãmAdityá
    I am a newbie to Linux world, although I have previously worked on Ubuntu 11.04 for daily use (Net Access and simple recordings using Audacity). I am not sure, at what level I stand as a newbie. I bought this Asus Eee PC two days back. The model is Asus 1015CX. See the specs here http://www.flipkart.com/asus-1015cx-blk011w-laptop-2nd-gen-atom-dual-core-1gb-320gb-linux/p/itmd8qu4quzu8srr . I created a live USB to install 12.10. The usb booted fine. When I clicked "Try Ubuntu" option, it showed me a black screen with a cursor blinking. I waited for 15 minutes and had to restart using the power button. On clicking the "Install Ubuntu" button, the install process went seamlessly. [I have a Windows7 installed on one of the partitions]. i installed it alongside previous windows installation. The system was then rebooted for the first time. It showed the GRUB menu and I selected the first option Ubuntu. After showing the splash screen for a second, it began showing various messages on a black screen and then it struck on "Stopping Save kernel state message". I had to force shut the system using power button. Sometimes it just gives a blank screen with a cursor blinking and on pressing power button, some messages stating that acpid is doing something and stopping services pops up and the system shuts down. I tried booting with "nomodeset" and other parameters as directed in solution to previous such problems on forums. Also Ctrl+Alt+F1,F2,F3,F4,F5,F6..F12 is not doing anything for me anywhere. At installation, I checked Login automatically option. On booting into recovery several options comes up. Clicking resume just gives me a blank screen with cursor blinking. on dropping to root shell and remounting filesystem as RW, I am able to supply some command that worked for others. startx -- Several messages comes up with last one stating Fatal error: No screen found sudo service lightdm start -- Gives a blank screen with a cursor blinking lspci | grep VGA -- Shows some Intel Integrated Graphic... something I don't remember I had reconfigured xserver-xorg, lightdm, reinstalled ubuntu-desktop, unity. What should I do..?? Will going back to 11.04 work..?? Or I should leave all hopes of running Ubuntu on my netbook. Please help.

    Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >