Search Results

Search found 14757 results on 591 pages for 'switch statement'.

Page 344/591 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Windows 7 recognises the wrong router.

  - by Henry

  I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

  Read the article

• Moving Portable Office. Have a LAN & Phone line query?

  - by John Smith

  We are about to move a portable office that has 8 phones and 12 lan connections. They are all wired back to our main switch and Nortel bcm200 phone system which are only about 20m (65ft) away. After the move the office will be 180m (600ft) away from these. What is the maximum length of cable a digital phone line can be? I am aware that a lan connection can only be 100m (305ft) when using cat5e utp. Does this rule apply to phone connections also? If so how can I extend beyond 100m for the phones? I was going to install about three cabinets, 3 switches and 6 patch panels for the lan connections but the ideal struck me tonight that maybe I could run a fibre optic line. Would this be feasible? Any feedback on this is greatly appreciated. Thanks

  Read the article

• sudo/su command for Red Hat Server 5.4

  - by rednaxela

  Without going into too much detail, I need to execute one linux command on redhat with root user access. Red Hat Server 5.4 does not recognise the sudo command. The command su can be used to switch to the root user on redhat, but su cannot be done in one line. For example the command: su ; cd opt/storage/RootAccessFolder will not work because this only switches you to root, then executes the cd command once you have logged out from the root user. I guess what i'm looking for is like a.. sudo cd opt/storage/RootAccessFolder but I say again, sudo doesn't work. Any ideas?

  Read the article

• Keyboard shortcut to jump between tabs on OSX Terminal

  - by Dan Fabulich

  In OSX Terminal.app, if you open new windows, you can easily switch between them with Cmd-1, Cmd-2, Cmd-3, etc. You can also cycle between tabs, using Cmd-Shift-{ and Cmd-Shift-}. But is there a way to jump straight to a particular tab, like you can with windows? e.g. Cmd-Shift-3 to jump to the third tab? (That's not it, of course.) I'm pretty sure it's impossible out of the box, but what if I'm willing to write some AppleScript to make this work?

  Read the article

• To Delete a tape from the ACSLSlibrary

  - by Senthil Kumar

  Hi Anyone there can help me out for an issue as below: There was a stuck tape in the drive and so the stuck tape was removed, but i need to logically delete the tape entry from NB, so that the same media can be inserted back for operations. Netback thinks that the tape is still in that location, hence it should be removed so that the entry is not there and NB does not recognise that the tape in that location, so the same tape can be taken in through inventory. The NB used is NB5.1 Any command to delete this entry, this is a clustered based Environment (Active/Passive), and we use a ACSLS library (Physical) as well a Switch-SN6000(Logical) Kindly help me out as when we tried to delete the media from GUI it said- Could not delete- Cannot delete assigned volume (92).

  Read the article

• Check_webinject plugin will not connect to https site using

  - by uSlackr

  We're using Nagios to monitor some of our web sites. We have a script that uses the older plugin that we are trying to switch to using webinject.pl from cpan. When the script runs, it generates this error: LWP::Protocol::https::Socket: SSL connect attempt failed with unknown error error:1407741A:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert decode error at /usr/local/share/perl5/LWP/Protocol/http.pm line 51. It appears the web site does not support TLSv1 for https. If it matters, the site is a Cisco WebVPN. I've pointed the same script at a different site that does support TLSv1 and it seems to work fine. My web search is coming up empty. Successful connect: <case id="1" description1="Metro Home Page" description2="Metro, login test" method="get" url="https://metro.myco.com/index.php" verifypositive="restricted" logrequest="yes" logresponse="yes" sleep="1" / Failing connect: <case id="2" description1="WebVPN Home Page" description2="webvpn.myco.com login test" method="get" url="https://webvpn.myco.com/webvpn.html" verifypositive="Authorized" logrequest="yes" logresponse="yes" sleep="1" /

  Read the article

• Which is better for running Ubuntu and other Linux OSes, Chromebook or Windows, why? [on hold]

  - by Serge

  I'm learning programming and I would like to switch to a Linux OS, perhaps Ubuntu, to continue this, but the current machine is generally getting pretty old and slow and Windows is the least favorite option for production, and I can manage getting something new right around the price range of the nicest Chromebook on the market right now. However, I have compared specs of HP Chromebook 14 with those of regular PC laptops that roughly cost the same, and the latter consistently have approximately the same and sometimes higher (like the processor speed) specs. Yet usage of Chromebooks for this purpose is pretty widespread nowadays. Is this because they were initially built for a Linux OS - and is it really THAT crucial - or are there other major factors at play here?

  Read the article

• Why would only the cpu fan not spin and no video displayed?

  - by Patrick

  I just built a new computer and when I first powered it on I got a continuous beeping which according to the manual means a power failure. After moving the voltage switch to the left a little I was able to get the beeping to stop. Even after the stopping though the CPU fan doesn't spin, and there is no display on the monitor. All the other fans and lights come on in the computer though, the DVD drive is working and ejects the tray, and the hard drive sounds like it spins up. Has anyone seen this before and know what is wrong or what has failed?

  Read the article

• Making a Live Thumb drive boot with Persistent files, settings AND *drivers* that load on boot?

  - by Luke Stanley

  I have seen https://wiki.ubuntu.com/LiveUsbPendrivePersistent but it's a mess. What methods support persistent drivers as well as files and settings and don't screw up lifespan of the flash drive? I'd like to see your personal recommendations on say, Portable Linux, USB Creator, Remastersys + Unetbootin, etc Backstory: I have a Inspiron 1525 that's hard drive has been slowly dying. I want to switch to a live USB/CD/DVD system until I can get it repaired but my laptops internal wifi device requires a network connection by another means for Xubuntu to let it work, and then I have to enter my Wifi key again, and THEN I have to reinstall Skype etc... I'd be damned every time I have to shut the laptop down. I'm ok with making a shell script for installing apps and copying settings as required but a good persistent install should make this old hat and slow and it doesn't take care of drivers. The last time I tried making an ISO with Remastersys it didn't seem to copy all the required settings.

  Read the article

• Improving Chrome performance on OSX

  - by Giannis

  There are a number of sites that do not display properly on Safari and I need to switch to Chrome. Although when the content of the sites requires flash player, Chrome will consume a significant amount of CPU. Running more than 3 windows, will cause my MBP to overheat, start the fans, and reduce battery life way more than Safari. What I am looking for is suggestions on ways to improve performance of Chrome running flash. I know Safari is optimised for OSX, but any improvement is welcome. Following I have a demo to display the issue. I am running same youtube video on Safari 6 and Chrome 21,both updated,at the same time. Both browsers have been reseted and have no extensions. This is run on MBP 13" 2012 with 2.9 i7 running OSX 10.8.1. p.s If any additional details can help please let me know.

  Read the article

• Can I trust that ZFS is consistent between Linux and FreeBSD?

  - by iconoclast

  I'm planning to build a FreeNAS box sometime soon, but if ZFS on Linux eventually proves to be reliable, I might want to switch, just to have a more familiar OS. So I'm wondering if I can trust that the different implementations of ZFS are compatible. In other words, if I just swap out the boot disk from FreeNAS to Linux or OpenIndiana, can I trust that nothing bad will happen to my data? This may seem like a stupid question--obviously it ought to be compatible--but I'm guessing that ZFS isn't commonly used in cases where drives are moved between computers, so I'm hoping someone can provide a better answer than just "it ought to be".

  Read the article

• What's wrong with Lotus Notes / Lotus Domino?

  - by user20242

  I have a client who is using Lotus Domino for their web application/server platform. The client has two "web developers" who are more comfortable with Lotus Domino than more mainstream tools and technologies and are not enthusiastic about making a switch. I have been asked to provide an assessment of why it may be prudent to migrate to a different web application platform. I would be particularly interested in understanding deficiencies related to the platform as I have very little knowledge of Domino but am very familiar with other platforms. In addition to the fact that Apache has over 70% of web server market, IIS over 21%, and Lotus almost 0%, what other reasons would you give for moving away from this platform?

  Read the article

• test of ICMP block

  - by Marcos

  In my bash scripts I have been using something like: until fping -u google.com; do echo "$0[$$] Network/DNS down?? $(date)" 1>&2 && sleep $(($RANDOM%(1 + ++trynum * 1) +1)).222; done to test for online connectivity. It halts in place, sleeping growing random intervals, until it can ping google.com again. Problem: At some sites ICMP pings are blocked altogether, and web pages are still reachable. What's a short way to test for this general case? Based on that test I will switch over to an http-based test like the exit status of curl -s google.com >/dev/null if that is a good one.

  Read the article

• Windows 7 Activation with Bootcamp and VMWare

  - by Jason Hernandez

  I have windows 7(64) installation setup on a Boot Camp partition on my MacBook Pro 13". I also access this partition through VMware hosted by OS X (snow leopard). Every time I switch between VMware and Boot Camp windows says that it needs to be re-activated because of hardware or driver changes. I've tried wmware KB KB 1003426 to no avail. Edo Thanks, Jason Edit, I am using the most recent VMware and tools. I've tried "KB 1004917" as well. No Dice. I'm considering re-installing at this point.

  Read the article

• Find DNS server automatically

  - by jdickson

  I've got a Windows 2012 server set up as a domain controller and DNS server in my basement. On my laptop, if I set it to use the IP address of my server as the DNS server, then it works as expected. The problem with that is that I use my laptop outside my home network and I need to switch it back to automatic. Setup is like this: ISP Router running DD-WRT Win 2012 DC/DNS and other network computers How can I have my laptop find the DNS server automatically instead of using my ISP's DNS servers?

  Read the article

• Disable/enable the proxy on a tab by tab basis in Firefox

  - by Rich

  Is it possible to disable/enable the proxy connection on a tab-by-tab basis in Firefox? I can access the internet with the proxy enabled, and I can access our internal servers with the proxy disabled, but neither configuration allows the other. I have a feeling that Firefox 4's per tab profiles may permit this, but was wondering whether there was a way to achieve this on Firefox 3.6.13, perhaps through the use of an extension. For the moment I'm making do with quickProxy (not QuickProxy which I've just discovered while trying to find quickProxy) which allows me to switch the proxy on and off for the whole browser, but would prefer something more fine-grained.

  Read the article

• Using client certificates with wget

  - by Doc

  I cannot get wget to use the client certificates. The documentation speaks about using the --certificate flag. The use of the certificate flag is clear, I set it to use the PEM version of the client certificate. But when I connect I get the following error: HTTP request sent, awaiting response... Read error (error:14094410:SSL routines: SSL3_READ_BYTES:sslv3 alert handshake failure; error:140940E5:SSL routines:SSL3_ READ_BYTES:ssl handshake failure) in headers. Giving up. ssl handshake failure means the client did not supply a correct client cert. Still the client cert I use, works in a browser. Note: When I disable client authentication on the server, wget can connect. Note: The use of curl is suggested, but I'd like to avoid the switch.

  Read the article

• XFS and loss of data when power goes down

  - by culebrón

  Each time electricity goes down, my desktop (without UPS) loses some temporary information. Opera can lose settings, history, cache, or mail accounts (Thanks heavens I was wise to use IMAP). Partially or all together. a whole file (complete and save) in Geany appeared empty (and I didn't commit it to Git) rhythmbox lost all podcasts subscription data I'm afraid there are other losses I just didn't see. What's the reason? A memory files cache, a mem-disk? Or non-atomic file writes in xfs? I have Ubuntu 9.10 and XFS on both / and /home partitions. Is ext4 safer in such circumstances? I've seen ext3 is faster. Is it as safe as *4? Given that the apartment I rent is connected to a common bus and 1 safety switch for several apartments, and the neighbors - alone or together - overload it at least once every week, the lights go down often enough for this to be an issue.

  Read the article

• Monitor HTTP usage on network from Linux free

  - by David

  I manage a small office network. I am looking to start monitoring/logging internet usage (website requests) for each user on a small network. All the windows clients are running through a switch to a BT router. I also have a linux (centos) machine which is connected as a client to the BT router as well. Is there any free software I can install on the linux box (or my own machine) to allow me to log and monitor websites requested by users kind of like browser history. Ideally, something that would collect each client's browser history in 1 place. Thanks

  Read the article

• gnu screen - mouse does not work in nested screen session

  - by Matthew

  I started a screen session inside another screen session, both on my local machine. This is using cygwin, but I don't think it matters. I have tried via ssh to a real unix machine but the behaviour is the same. Mouse works great in the first screen session, I'm able to open vim with :set mouse=a and I can click to move the cursor or switch tabs, and the mouse wheel scrolls. But in the nested session it does not work, mouse is only useful for selecting terminal text that gets put in the clipboard, but is not able to interact with vim. I want this to work because I usually work with a local screen session, then ssh to a remote server and have a remote screen session running too (hence the nesting) and I like to scroll swiftly in vim by using the mouse wheel. Can anyone tell me why the mouse works in the first layer of screen but not in the second, nested screen session, and how I can make it work? Thanks in advance, Matthew

  Read the article

• Norton Security Suite Symantec Download Manager Error: "Error writing to disk"

  - by Stephen Pace

  My broadband provider (Comcast) decided to switch their 'included with service' security suite from McAfee to Norton Security Suite. Their email directed me to a site that downloaded the Symantec Download Manager (NortonDL.exe) and that went fine. I'm running Windows 7 32-bit and running this application pops up the standard User Account Control message and the software is correctly identified as coming from Symantec. I answer 'yes' to allow the software to install and upon launch immediately get an "Error writing to disk" error. I searched the Internet for this error, but mainly I find Comcast users complaining about the same issue with no resolution other than to call Symantec. I found no one suggesting a successful workaround and it appeared that most of the support calls took up to three hours. I'd like to avoid that if possible. Ideas? To be honest, I'm getting close to bagging this installation and just moving to Microsoft Security Essentials.

  Read the article

• Software RAID 10 on Linux

  - by vpetersson

  For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

  Read the article

• Bug in CDP implementation

  - by Suraj

  We are developing a Linux based ethernet switch which has 6 ports. We are done with CDP protocol. I have connected a Cisco device to port 2. When I quiery for the Cisco device, I get the reply and instead of getting lan1 (port 1 - lan0 .. port 6 = lan5), I always get the interface name as eth0. The same is the case for all the ports. What changes are required to get the correct interface name? I will be very thankful for the information. The snap packet is received in the routine snap_rcv() in the file "linux._2.6.XX/net/802/psnap.c"; Regards, Suraj..

  Read the article

• moved wordpress site to rackspace cloud, now custom queries breaks code

  - by nikki

  Moved a wordpress site onto a rackspace account from a linux server. Everything is working except for any custom post queries that I programmed. these were working just fine before, and I have tested to make sure it is these queries that is breaking the code. For example here is a snippet that will make the page not load <?php query_posts( "p=215" ); ?> <?php if (have_posts()) : while (have_posts()) : the_post(); ?> <? the_content(); ?> <? endwhile; endif; wp_reset_query(); ?> Does anyone have any insights? My thoughts are that the switch to Rackspace account has something to do with it.

  Read the article

• does heartbeat v3 support same resource agent types of pacemaker?

  - by Emre He

  As we know, Pacemaker supports three types of Resource Agents, ? LSB Resource Agents, ? OCF Resource Agents, ? legacy Heartbeat Resource Agents http://www.linux-ha.org/wiki/Resource_Agents does heartbeat v3 support above 3 types resource agent? or it only support LSB and legacy heartbeat resource agents? because we have only virtual ip and one service need to switch in ha cluster, so we decide not involve pacemaker, so we come to this question, for example we cannot monitor the application service by heartbeat, heartbeat only can handle to start it on active node. thanks, Emre

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >