Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 347/805 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• Is it possible to combine two internet connections to increase performance?

  - by cornjuliox

  I've got a small home network, 3 PCs plus a laptop or two when the relatives come to visit, connected to a single cable internet connection. Now, as soon as everyone starts using the 'net the performance starts to suffer and if the load is heavy enough nobody can get anything done and everyone complains. At one point it was so bad that only one of us could use it at a time. I was researching possible solutions to this problem and I heard that internet cafes that utilize 2 internet connections, possibly from different providers, and have some sort of router that allows them to split the traffic between the both of them, with online games going through one and web traffic going through another. Is this possible? What is the technical term for it, and can/should it be applied to a home network setup or is there another solution to this problem?

  Read the article

• trying to understand how Linux /etc/hosts file works with local and external IP addresses

  - by gkdsp

  Let's say I have a Linux server with an external IP of 123.456.789.012 and a local IP of 192.168.0.1. If it's /etc/hosts file looks like, for example, 123.456.789.012 host2.mydomain.com 192.168.0.1 host2.mydomain.com When an application on the server generates traffic to send using host2.mydomain.com, how does the server know whether to use the local or external IP address (since the same host name shows two IP addresses)? Or, does it need something additional than what I've presented here to decide this? Or, does it just sent it out as host2.mydomain.com and let the receiving end deal with it (if so, how to make sure traffic intended for local network indeed goes to local network)?

  Read the article

• Is SCCM overkill for medium-sized organizations?

  - by Le_Quack

  I am an IT technician in a high school with around 1600 students 250 staff and 800+ client computers mostly running Windows 7. Our team is composed of three members. My boss seems content with a network that works (just about) not necessarily a productive well maintained network that is easy to run and maintain. I'm still fairly early on in my I.T. career so I'm not up to speed on all the different endpoint management solutions that are available. I'm looking for a better way to manage clients (deploy software, track changes, inventory etc) I like the look of SCCM 2012's features but the case studies seem to be aimed at large multi-site infrastructural rather than a single mid sized site. Is SCCM suitable for a mid sized single site or is it aimed at much larger corporations? How can I determine whether or not an endpoint management solution like SCCM is a good fit for our organization? EDIT: Thanks for all the help I'll take a look at SCE and SCCM and get some proposals drawn up to take to my boss/deputy head

  Read the article

• What if a computer with Ethernet

  - by George Nixon

  I'm just revising for an exam on Networks and Data Communications, and there's one thing I don't get about CSMA/CD and Ethernet. It's supposed to be fairly stable, for instance if a computer drops out of the network, it's not a problem like it might be in a token ring network (I think). But Ethernet works by all the other computers waiting for the currently transmitting computer to finish what it's doing, and then the others use CMSA/CD to determine who goes next. What if one computer malfunctioned and kept sending a continuous stream of data in an infinite loop? In fact, is there a standard time for pcs to transmit before they yield to others?

  Read the article

• How to set up a file server in a restricted corporate environment

  - by Emilio M Bumachar

  I work in a big corporation, and the disk space my team gets in the corporate file server is so low, I am considering turning my work PC into a file server. I ask this community for links to tutorials, software suggestions, and advice in general about how to set it up. My machine is an Intel Core2Duo E7500 @ 3GHz, 3 GB of RAM, Running Windows XP Service Pack 3. Upgrading, formatting or installing another OS is out of the question. But I do have Administrator priviledges on the PC, and I can install programs (at least for now). A lot of security software I don't even know about is and must remain installed. But I only need communication whithin the corporate network, which is not restricted. People have usernames (logins) on the corporate network, and I need to use them to restrict access. Simply put, I have a list of logins of team members, and only people in the list should access the files. I have about 150 GB of free disk space. I'm thinking of allocating 100 GB to the team's shared files. I plan monthly backups on machines of co-workers, same configuration. But automation of backups is a nice, unnecessary feature: it's totally acceptable for me to manually copy the contents to a different machine once a month. Uptime is important, as everyone would use these files in their daily work. I have experience as a python and C programmer, but no experience whatsoever as a sysadmin, and almost nothing of my programming experience is network programming. I'm a complete beginner in this. Thanks in advance for any help. EDIT I honestly appreciate all the warnings, I really do, but what I plan to make available is mostly stuff that now is solely on DVDs just for space reasons. It's 'daily work' to read them, but 'daily work write' files will remain on the corporate server. As for the importance of uptime, I think I overstated it: a few outages are OK, it's already an improvement over getting the DVDs. As for policy, my manager is kind of on my side, I will confirm that before making my move. As for getting more space through the proper channels, well, that was Plan A, and it's still on the table... But I don't have much hope. I'm not as "core businees" as I'd like.

  Read the article

• The new Google Analytics - what new useful features have you found?

  - by Rob

  If you don't know already a new version of Google Analytics has just come out. On first initial views it doesn't seem like much of an improvement on the previous version. There's lot's linking to Google's social stats but I'm yet to see the value of that. Also it doesn't seem to make the best use of the important data, it's tending to push referral sites, keywords to the back and bring the less important data to the front. Is that a sign of things to come??? One feature I did find interesting was the visitors flow as it shows the visitors path through your site. What new features have you found useful/interesting?

  Read the article

• Remote Desktop Connection over VPN on mac

  - by Diego Faria

  I'm trying to connect to a Windows computer on over a VPN connection using Remote Desktop connection. I opened Network on mac and created a new connection. Interface: VPN. VPN Type: PPTP. I filled the inputs for server address, account name, password and applied. I connect the VPN and it connects. I open Remote Desktop Connection and put the IP of the machina i want to connect but it dont connect, a problem occurs saying that the machina may be turned off and etc. But in a windows machine I can connect there and the machine is up and running. On my mac I ping to the ip address that a want to connect and it has no response. I think that the vpn have a problem, is there a way for me to certificate that i am on the vpn network ? Whats going on?

  Read the article

• apt-get update stuck on "Waiting for Headers"

  - by crasic

  I'm setting up a Maverick server on a spare PC. The install completes fine and the system boots up into the shell. However, when I try to do a apt-get update , apt hangs on almost every entry with the message 99% [Waiting for headers] sometimes a message of 96 b/s appears on the far right. The actual percent that it claims also varies. Searching around online gave a potential solution by using the option Acquire::http::Pipeline-Depth="0" this somewhat alleviates the problem, i.e. it stalls on every other entry with the same message as above. If you wait it out (the whole update took about 4 hours), the update still fails as a good portion of the hits show a "unable to connect" or similar message, despite the fact that I can ping the server from the pc just fine. The problem is also unrelated to the mirror used since I've tried about a dozen mirrors with no success, I've even tried commenting out everything but the main entry in sources.list and it still refuses to update. The network connection is fine since I can ping and wget (apt won't let me install lynx until I run a successful update) just fine. I've also reinstalled the distro with no luck. The only thing weird about the setup is that the PC is connecting to the internet through my windows laptop with ICS configured properly, but as I've said before, the network connection is fine.

  Read the article

• Naming your website longname.com vs shortcatchy.net vs shortcatchy.info

  - by jskye

  I'm designing a website that will basically be a social network for sharing information. I have the domain $$$$d.net and the same domain $$$$d.info where $$$$ is a word (that runs into the d) pertaining to the purpose of the site . The .com of this domain was already taken, but they've got nothing showing. They only have a not reached google error showing ie. dont seem to be trying to sell it either. I also have the long name of the site $$$$------&&&&&&&&&.com where the words $$$$ and &&&&&&&&& would contribute relevant seo to the site. In fact the word $$$$------ would also if a one letter spelling mistake is recognised at all by google, which i doubt but am unsure about. But as a brandname the $$$$------ word still works relevantly. Which do you think is a better choice to use? The short catchy name with the .info for relevance to information The .net which is more familiar than .info but slightly less relevant maybe. (But i think net as in network still works cos as i said it will be a social networking site). The long, .com domain which has more SEO plus a pun albeit on a spelling mistake. I know its kind of a subjective question and also hard to answer without knowing the name (which I've obfuscated because I'm only in initial design stage) but nevertheless im interested in what some of you guys think.

  Read the article

• SSIS Tips & Tricks (Presentation)

  This has been a rather well used presentation title but it does allow a certain degree of flexibility, and we covered a good range of topics in my session at the UK SQL Server User Group in Cambridge last night. Thanks to all who attended. Here is the rather limited slide deck and the all important demo packages for download as promised. For reference, high level topics covered were BIDS Helper Inserts and Updates Transactions Script Debugging Data Flow Checkpoints I’ll update the post with a link to the Live Meeting recording when I get it. Presentation & Demo Packages (194KB) SSIS Tips & Tricks - Darren Green.zip

  Read the article

• SSIS Denali CTP1 Source Assistant

  - by andyleonard

  I like the new Data Flow Source Assistant in SSIS Denali. The default view is shown above, with the "Show installed only" checkbox checked. When not checked, the list of Source types changes: In previous versions of SSIS, I rarely created connections in the Connection Managers pane - I usually hit a New button in either a Source or Destination Adapter, or in a task. It was just easier letting the task or adapter pick the proper Connection Manager editor. This is handy and a time-saver. :{>...(read more)

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• Windows server 2008 R2 nas connection

  - by Msmit1993

  I am a student and i'm experimenting with my own home server running windows server 2008 R2. Now i have a NAS in my network an i can connect with it trough my server but only if i am on the administrator account. My own account is in the administrators group but can't establish a connection with the NAS unless the administrator account has already connected. How do i make my own account connect with the NAS without first connecting with the admin account. The error message on my account: An error occurred while reconnecting Y: to \NAS\Download Microsoft Windows Network: The user name could not be found. This connection has not been restored.

  Read the article

• How to port forward https traffic via ssh and/or remote desktop to through several networks and PCs?

  - by donttellya

  I have the following environment: In company X I develop a application on a pc A in network A with ip address 192.168.100.50 which has to do an https request to an http server located in the intranet of company Y In company X is another pc B in network B with ip address 192.168.200.100 pc B (of company X) can access the intranet from company Y via ssh tunnel (putty) pc A (of company X) can ping pc B (of company X) note: pc A can also do a remote desktop connection to pc B) pc B can ping the http sever pc A can not ping the http server How can the https request from pc A of company X get to the http server of company Y? On which pc must be putty configured? And which settings for host, port forwarding etc. has to be done in putty? So finally the https request should go from PC A - PC B - Http Server in company Y.

  Read the article

• Media Drive Permissions

  - by Wade Wofford

  I just switched from a Hackintosh to Linux, and am trying to make sense of it. On my hackintosh, I partitioned a big drive into 3 parts--1 which holds music, 1 for film/tv, and one for the OS. I installed Ubuntu onto the OS partition, and am now trying to make it so I can write to the media drives. I've searched around and tried several things. I tried gksu nautilus in Terminal, which brought me into root permissions. When I select a folder and try to change permissions, I get "The owner could not be changed...Error setting owner: Read-only file system" Ultimately, I have two specific aims: - I want to make it so I can write to the film/tv drive from the ubuntu machine only - I want to make it so I can write to the music drive from the ubuntu machine, or any other machine on the network (all Macs). That is, I want a single music library (an iTunes file) that will serve all Mac laptops/iPads/iPhones on the network, but which XBMC on the Ubuntu machine can also see / read from. Music will be added to the iTunes library via a single Mac laptop, but all other devices should be able to see the music drive.

  Read the article

• How to synchronize users, passwords, hosts, etc without NIS

  - by joshxdr

  I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

  Read the article

• Windows 8.1 killed my wifi

  - by char1es

  Was running Windows 8 on a Lenovo G780 and updated to windows 8.1 Wifi does not work anymore, i always receive a dns server not responding error. I have tried using public dns servers from Google but with still no results. I've restarted my router with no results. All other devices on my network are having no trouble at all. I've tried updating the wireless driver but the manufacturers website claims that the Win8.1 driver should be updated with the update from windows. So i cant find a wireless driver... Anyone else having this error and does anyone have any ideas on how to fix it?? EDIT: here are the driver details: Broadcom 802.11n Network Adapter Provider: Microsoft Driver Date: 2013-05-31 Driver Version: 6.30.223.102 Digital Signer: Microsoft Windows Thanks

  Read the article

• Samba as a PDC and offline authentication

  - by Aimé Barteaux

  Say I have a Windows laptop which has been connected to a domain. The domain has a Samba server as a PDC. Now say that I move the laptop outside of the network (the network is completely inaccessible). Will I be able to logon into accounts I have accessed before on the laptop (through GINA)? Update: Looking at the smb.comf documentation I noticed the setting winbind offline logon: This parameter is designed to control whether Winbind should allow to login with the pam_winbind module using Cached Credentials. If enabled, winbindd will store user credentials from successful logins encrypted in a local cache.. To me it looks like this solves the issue but can anyone else confirm it and/or point out if any additional values need to be set?

  Read the article

• Configure IIS 6 to deny access to specific file based upon IP address

  - by victorferreira

  Hello guys, We are using IIS 6 as our webserver. And we need to deny the access for one specif file, placed in only one specific URL, to everybody OUTSIDE the local network. In other words, if somebody is trying to access that filme/page from their own computer at home, using the internet, they must not succeed. But, if the same person try to do that at the same network of the web server, its ok. I am not sure about that, but Apache uses ORDER DENY,ALLOW. You specify the URL, allow or deny to all or to a range of IP. Any suggestions? Thanks!

  Read the article

• Where do Outlook folders go when moved?

  - by balexandre

  I have an account with external user mailboxes opened and accidentally I have moved a folder and now I can't find it anywhere. Action: I clicked on a folder and dragged it into another one. Result: Can't find the moved folder anywhere The above picture is the folders I currently have from my Outlook 2010 (via Exchange 2010), under an AD Network. Where can I (me, having admin rights over the network) retrieve that missing folder again? Attempts: The original and the one folder I need was accidentally moved, but I have created a poi folder and tried the same way, and I got the same result... the folder went missing. I also tried to reboot the client machine and access the same mailbox from OWA ... no luck on both attempts :( Any ideas on how I can retrieve the missing folder and its emails again?

  Read the article

• 12.04 WiFi issue on a particular access point

  - by user71706

  I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• TCP/IP performance tuning under KVM/Qemu

  - by vpetersson

  With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

  Read the article

• How is DNS used by individual processes?

  - by atroon

  When resolving FQDNs or machine names to IP addresses on my local network (mycompany.internal) I can use dig on the command line (linux/mac) or nslookup (windows) to query the configured server and get a response. But trying to enter the FQDN or even just the machine name in a ping command or in a web browser results in 'Unknown Host' or DNS errors. Here's a sample, this one from the Mac: mac:~ atroon$ dig server.mycompany.internal ; <<>> DiG 9.6.0-APPLE-P2 <<>> server.mycompany.internal ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 5219 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;server.mycompany.internal. IN A ;; ANSWER SECTION: server.mycompany.internal. 1200 IN A 172.16.254.36 ;; Query time: 0 msec ;; SERVER: 172.16.254.8#53(172.16.254.8) ;; WHEN: Wed Dec 16 11:39:15 2009 ;; MSG SIZE rcvd: 55 mac:~ atroon$ ping server.mycompany.internal<br> ping: cannot resolve server.mycompany.internal: Unknown host I cannot for the life of me figure this one out. The DNS server is a SBS 2003 box which handles AD, some file/print, etc for a small company network. This issue happens to me about three times a week, and when I'm connected to the local network directly, the same switch as the server even. I can make any connection I want with IP addresses, I just can't make DNS work. Additionally, at the same time I'm experiencing this, other users are fine, which makes me think it's a problem on my Mac. But what sort of problem? How can dig send a query and get a reply, and ping say 'unknown host'? I'm posting here vs. serverfault because I think this is a local problem not a server problem...but if anyone can point me at the server, I guess we'll head down the street a domain or two.

  Read the article

• Can only access asp.net app on localhost

  - by Kevin Donn

  I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >