Search Results

Search found 14757 results on 591 pages for 'switch statement'.

Page 353/591 | < Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >

• Vista laptop won't connect to airport extreme

  - by Hutch

  Our previous router died, and to replace it I procured an apple airport extreme. My mac, my wrt54gs (with ddwrt acting as a bridge) and a linux machine have had no problem connecting to the wireless. None of the wired clients are having a problem obviously. The problem is one of my roommates can not connect. That's not strictly true. He can connect to the network, and will, infact, get a dhcp lease. However he cannot get any packets out. Can't ping the router, can't access any web sites, nothing. However he's fine if we switch to an unsecured network. Which is obviously not acceptable. The airport only allows for 'wpa/wpa2 personal' and 'wpa2 personal' (and of course the enterprise versions there of) I keep reading about this problem in multiple spots on the web, but never see any actual answers... Anyway the laptop: hp/compaq cq50-215nr vista home premium wireess card: atheros 5007 airport is simultaneos dualband II

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• Multi screen RDP in Windows 8.1 Enterprise

  - by bgs264

  I have just flattened my machine and installed Windows 8.1 Enterprise Edition. I have used the Hyper-V to create a virtual machine for my Software Development stuff, on my VM I have also installed Windows 8.1 Enterprise Edition. I want to have two screen support when using this VM (not using /span) Both the Hyper-V viewer and Remote Desktop give me a tickbox to "Use all my monitors for the remote session". However even with it ticked (and even when I tried the /multimon switch on the command line), I only get a single screen. Am I missing something - this should be supported in Enterprise edition, right? Is there some extra config I need to do on the RDP host? Forgive me if it's an obvious question, I'm more a developer and just stumbling through ;-) Cheers! Ben

  Read the article

• How can I follow someone from my non-default account?

  - by JonW

  In Tweetdeck I have two accounts; a default one and a secondary one. I have them both in separate columns. However, when a person crops up in my non-default account column that I want to follow I can't seem to find a way to follow them from that account. Hovering over the 'Follow' button brings up the tooltip saying 'From {@Account A}' but no way to switch to the other account. Aside from opening up the link in my browser, signing into Twitter from my second account and then finding the user that way, can I do it directly from Tweetdeck?

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• Windows 7 systeminfo reporting incorrect System Boot Time?

  - by rdingwall

  I work 9-5 and switch my PC off when I leave the office each day. When doing timesheets I need to know what time I got to work, so I usually use cmd systeminfo for finding the System Boot Time. Since upgrading to Windows 7 however, it's started reporting bizarre numbers between 11pm-2am instead of 8-9am. Today it says it booted at 11:34pm last night! I checked the event log and there is no entries between when I shutdown at 5:30pm yesterday and booted around 8am this morning. Has anyone else encountered this?

  Read the article

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• disable RADIUS for Cisco 2500 wireless controller

  - by Tim Vaughan

  I have a Cisco 2500 wireless controller and four lightweight access points. I want to use the controller to manage a wireless network secured by WPA only, without using RADIUS or anything else. We'll handle the authentication using a captive portal behind the access points. However, it seems like the controller's default security policy requires a RADIUS server and I can't find out how to switch the policy off. The documentation assumes I'm in an environment which needs heavy-duty security and the use case is actually a small charity/business with much less stringent security requirements. How do I disable the complicated security policy and instead run a simple one that just uses WPA?

  Read the article

• Wireless DHCP doesn't work until wired Ethernet plugged in

  - by MT_Head

  A client of mine has an Asus R1F tablet running Windows XP Tablet SP3. It has an Intel 3945ABG wireless card; wired Ethernet is a Realtek something-or-other. In the past few days, it's developed an odd problem: WiFi authenticates, but can't get an address via DHCP. plug in wired Ethernet - both interfaces get good addresses unplug cable, WiFi continues to work until shutdown. Next morning, repeat process. I've tried: turning WiFi off/on (there's a slider switch) disabling/re-enabling via Device Mangler uninstalling and reinstalling the driver for the 3945ABG... changing from Intel Pro/SET to Windows Wireless Zero Config (and back) restarting the router changing the static DHCP assignments at the router upgrading the router firmware, just on general principles The router/access point is pfSense 1.2.3RC1 (was 1.2.2); wireless card is Atheros-based. None of the 12 other users (5 with tablets) are having problems.

  Read the article

• FreeNas running on ESXi - sometimes gets very slugish.

  - by Luma

  Hello everyone, I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the throughput of this VM just dies, for example right now it can't even handle streaming a song and when I tried to transfer a folder the speed goes from 10-400KB/s. Might I add at this point that the ESXi box has dual gigabit network cards plugged into a good solid gigabit switch and other linux and windows VM's are just fine I have seen speeds over 90MB/s (frequently) The server still has ram left over (plenty actually) and cpu is very low (500-1000mhz) any ideas what could cause this? thanks. Luc

  Read the article

• infiniband network between 3 servers

  - by grumpf

  Let's say I have 3 different servers, each one with an infiniband card. Each card has 2 different ports. (I don't know about the model yet) Is it possible to create 3 different networks and to allow the 3 servers to communicate with each other without any problems? (and any spof). I guess I just have to setup the /etc/hosts correctly. I really don't know about infiniband, so please help me :) Thanks in advance. EDIT: Point is to NOT USE a switch!

  Read the article

• Computer won't start unless power is removed for ~5 minutes

  - by Paul Tarjan

  I have a fairly standard 2-year old desktop computer (quad-core intel, single hard drive, decent video card, 300W power supply) which recently started acting up. I'm not sure what the cause is, so hopefully you can help. Sometimes (once a week-ish) I press the power button and nothing happens. No blinking, no sounds, no nothing. If I remove the power cord (or flip the switch on the power supply) I hear a capacitor discharge. If I leave it in the "no power at all" state for about 5 minutes then I can put the plug back in and the computer works perfectly. What is the issue? What do you think I have to replace?

  Read the article

• Bluetooth radio device is not available

  - by Mike

  I reinstalled my Windows 7 operating system, and have since been unable to detect my Logitech m555b bluetooth mouse. Here is some info about my system: I have have a working connection with a bluetooth printer. I have a message in the "My Bluetooth" section of explorer stating "Bluetooth radio device is not available". The Device Manager indicates that the Generic Bluetooth radio is working correctly. The bluetooth "F12" switch is on. Mouse batteries are new and the right way around. I'm presuming that I need a bluetooth driver which is non generic. The computer is a Clevo P150HMx (the version with the GTX485 GPU) with the default WLAN / bluetooth combo card manufactured by Realtek (I think it's a Realtek RTL8188CE card). I think I have the drivers installed, but I still get the generic driver in the Device Manager. I'm confused. Please help, I'm going mad on the touchpad. (Thanks for the touchup wizlog)

  Read the article

• How to create a template with contact info in Windows Live Mail?

  - by Elliott

  Is it possible to create a template to use in Windows Live mail which I can load peoples details into from my contact list? I currently send emails to people but I have to manually view them in the address book, then copy there details into an email. What I would like is to open the template, select the email address and everything else is auto completed, such as first name, address etc. These would go in set fields which I set within the template. Is this possible? I am willing to switch to another mail account if needed but I would prefer it to be in Windows Live Mail. Thank you. :)

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• How to start wuala on the linux commandline with auto login

  - by mit

  When i start wuala on the linux commandline like this, it logs me in and the folder is mounted: wualamcd login username password enableAutoLogin I can shut it down from another console typing wuala shutdown But how do I actually use the auto login that I just set using the enableAutoLogin switch? What is the command to start it again, so it logs in but does not need the password? I tried wualamcd login and wuala starts but no one gets logged in. Auto login in gui mode works fine. This is 32 bit linux with openjdk 6 JRE.

  Read the article

• How do I get 480i resolution for an external monitor in Windows 7?

  - by Carson Myers

  I'm trying to get a laptop video signal to my really old television, so that I can play movies on it. But the TV won't accept the video signal. I found the manual online, and apparently the output has to be 480i. But I don't know how to do that -- Windows 7 will only let me set the resolution down to 800x600. Even if I get it down to 640x480- is that 480i or 480p? How do I tell the difference? How do I switch between them? How do I get the resolution down so low in the first place?

  Read the article

• Is it possible to share a big-screen monitor - switching between personal Windows 7 laptop in the office?

  - by Nam Gi VU

  Hi everyone, This would be strange to ask this but I'll try a go :). The situation is as below. We use laptop & wifi in the office. We often make demo to each other and need to show the demo on a big screen mornitor hang in the middle of the room :). I want to switch the display between each of the staffs using LAN wifi network. Please give me some suggestions on how to do that. Thank you! Nam.

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• Redirect To Domain Before SSL Is Read

  - by Devin Dixon

  I had to switch servers and I want to redirect all SSL urls to the non-ssl site. The problem I am running into is the https site still throws invalid certificate error even through apache has the redirect implemented. <VirtualHost *:443> ServerAdmin [email protected] DocumentRoot /data/sites/www.example.com/main/ RewriteEngine on Redirect 301 / http://www.example.com SSLEngine on SSLCertificateFile /etc/httpd/ssl/www.examplecom/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/httpd/ssl/www.example.com/ssl-cert-snakeoil.key ServerName www.example.com ErrorLog "logs/example.com-error_log" CustomLog "logs/example.com-access_log" common </VirtualHost> My question is, how can I do a redirect and avoid the invalid ssl certifcation error in the browser?

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• Shortcut to open URL from clipboard

  - by good boy

  I want to create a shortcut that opens links from the clipboard. I frequently switch browsers and it's very annoying to copy/paste hundreds of URLs from one to another. I have created a shortcut to launch a page on each browser - but how can I make the URL field include data from clipboard, so that when I copy a URL and click on the shortcut, it will direct to the URL that is currently on the clipboard. If this is not possible, then is there an AutoHotKey script or something similar that can accomplish this? I would prefer a Desktop shortcut, but whatever works.

  Read the article

• How to tell if you are connected to Wireless B, G or N?

  - by Raheel Khan

  I am using Windows 7 on all wired desktops and wireless laptops in my home network. I recently upgraded my Ethernet switch to Gigabit and instantly noticed an increase in throughput in wired devices. I also bought a Wireless-N WAP but with degredation in wireless file transfer speeds. I have been told that a number of reasons could affect wireless speeds including which WAP is used, how many wireless devices are connected, which security mode is used, etc. However, that remains irrelevant to my question. Each of my laptops claim to support Wireless-N but I cannot seem to figure out how to determine if the laptops are truly running Wireless-N or are connected to the WAP through some sort of mixed-mode. I do not have control of the WAP device so cannot tell what mode it is running in. Is there a way to tell which mode is being used and what the throughput is for each connected device without having access to the WAP interface?

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZSF version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

< Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >