Search Results

Search found 24755 results on 991 pages for 'linux mom'.

Page 354/991 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

  • KVM Guest not reachable from host

    - by Paul
    Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

    Read the article

  • How to create a fully functional server of own? [closed]

    - by Saransh Sharma
    Hi i am looking for various companies for cloud hosting and servers dedicated one but i am not pleased with service being provided in our country and don't wanna opt to other country rather then India,well and also looking in cost factor too....so what i am looking is to create our own server which we can manage basically its like we would create a server or a machine or a pc and make it online and will use it as a server Problem is we need fully managed solution and we are not getting it anywhere and we are a startup looking to save and create something new in server so guys is it possible to create a server a webserver with home/dedsktop pc PLease help Saransh sharma

    Read the article

  • Simple NNTP clent for Ubuntu

    - by Alexander Gladysh
    I need to download a particular NNTP group. I do not need to setup any crons, put group contents in /opt and other stuff. Just run <fetch-nntp> <server> <group-name> <output-dir> and be done with it without putting a lot of garbage in the system. If that <fetch-nntp> would not fetch the same messages on the second run — fine. But I can live without it. All NNTP clients that I've looked at are trying to be a NNTP server as well. Is there something simpler that is suitable for my needs?

    Read the article

  • Xinetd , vncserver memory requirement

    - by JP19
    Hi, I am installing the following on a low memory system: vnc4server xinetd xterm openbox obconf I will only occasionally be logging into the vncs for some admin work. My question is: 1) Does xinetd take memory / cpu even when vncserver is not running? If so, can I "run" xinetd on demand (how)? And if no, any idea how much memory it will take when vncserver is not running? 2) Does vncserver take substantial memory when no clients are connected? 3) Do openbox/obconf take memory when vncserver is running but no client are connected? 4) Do openbox/obconf take memory when no vncserver is running? thanks JP

    Read the article

  • Updating Network Solutions Virtual Private Server

    - by Peter Turner
    Just got a VPS from Network Solutions, it's got Red Hat 4, PHP 5.16, Java 1.4, no Yum and a whole bunch of packages I'd expect to have from a fresh install. Anyway, obviously I sound like a spoiled Ubunutoligist, but do I seriously have to manually update all this stuff, is there a shortcut, I'm used to Fedora, so I'm not sure what the differences are between using Yum in Redhat and Fedora. Should I just demand that Network Solutions give me a server that's not 4 years old or is there a way to update this thing that won't take all week?

    Read the article

  • sudoer scheme for a web developer that retains future control of a server?

    - by Tchalvak
    Background I have a server that I'm looking to set up, and provide access to another web developer. I don't want to put many constraints on him, though I wouldn't mind isolating the site that he'll be developing from others on the server that I will develop. The problem Mainly what I want is to make sure that I retain control over the server in the future. I want to reserve the ability to create/promote/demote and other administrative functions that don't deal with web software. If I make him an admin, he can sudo su - and become root and remove root control from me, for example. What is a good setup for the sudoers file so that he can do things like: *install software (through apt-get) restart apache access mysql configure mysql/apache reboot edit web development configuration type files in /etc * And can't do things like: take away other admin permissions change the root password have control over other security/administrative functions Example sudoer files that accomplish something like that could be useful, I'm sure that people have needed to do this before.

    Read the article

  • SSH Public Key Authentication only works if active session exists before

    - by Webx10
    I have a rather strange problem with my SSH configuration. I set up my server with the help of a Remote Access Card and configured everything with a KVM viewer. So while being logged into the server via the KVM Viewer I configured SSH with only pubkey and tried to login from my local laptop. It worked fine. If I quit the KVM Session (or logout with the user in the KVM session) I cannot login via ssh anymore (pubkey denied). SSH login only works as long as the user is somewhere still logged in. Any hints what the problem might be? Console output for a failed login (all personal data exchanged): OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /Users/mylocaluser/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 103: Applying options for * debug1: Connecting to 100.100.100.100 [100.100.100.100] port 12345. debug1: Connection established. debug1: identity file /Users/mylocaluser/.ssh/id_rsa type 1 debug1: identity file /Users/mylocaluser/.ssh/id_rsa-cert type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ab:12:23:34:45:56:67:78:89:90:12:23:34:45:56:67 debug1: Host '[100.100.100.100]:12345' is known and matches the RSA host key. debug1: Found key in /Users/mylocaluser/.ssh/known_hosts:36 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa2 debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/mylocaluser/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Console output for a successfull login (only possible while "active session" exists): OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /Users/mylocaluser/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 103: Applying options for * debug1: Connecting to 100.100.100.100 [100.100.100.100] port 12345. debug1: Connection established. debug1: identity file /Users/mylocaluser/.ssh/id_rsa type 1 debug1: identity file /Users/mylocaluser/.ssh/id_rsa-cert type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa type -1 debug1: identity file /Users/mylocaluser/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ab:12:23:34:45:56:67:78:89:90:12:23:34:45:56:67 debug1: Host '[100.100.100.100]:12345' is known and matches the RSA host key. debug1: Found key in /Users/mylocaluser/.ssh/known_hosts:36 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/mylocaluser/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 279 debug1: Authentication succeeded (publickey). Authenticated to 100.100.100.100 ([100.100.100.100]:12345). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = de_DE.UTF-8 Welcome to Ubuntu 14.04.1 LTS

    Read the article

  • Disable MOUSE wakeup when doing suspend on UBUNTU

    - by Shadyabhi
    When I do SUSPEND on ubuntu, in order to wake up, i can just move the mouse and the computer will wake up. But, I dont want that the computer is waked up when I move my mouse. How can I do that? My /proc/acpi/wakeup file:- shadyabhi@shadyabhi-desktop:~$ cat /proc/acpi/wakeup Device S-state Status Sysfs node SLPB S4 *enabled P32 S4 disabled pci:0000:00:1e.0 UAR1 S4 disabled pnp:00:09 ILAN S4 disabled pci:0000:00:19.0 PEGP S4 disabled PEX0 S4 disabled pci:0000:00:1c.0 PEX1 S4 disabled pci:0000:00:1c.1 PEX2 S4 disabled pci:0000:00:1c.2 PEX3 S4 disabled pci:0000:00:1c.3 PEX4 S4 disabled pci:0000:00:1c.4 PEX5 S4 disabled UHC1 S3 disabled pci:0000:00:1d.0 UHC2 S3 disabled pci:0000:00:1d.1 UHC3 S3 disabled pci:0000:00:1d.2 UHC4 S3 disabled EHCI S3 disabled pci:0000:00:1d.7 EHC2 S3 disabled pci:0000:00:1a.7 UH42 S3 disabled pci:0000:00:1a.0 UHC5 S3 disabled pci:0000:00:1a.1 UHC6 S3 disabled pci:0000:00:1a.2 AZAL S3 disabled pci:0000:00:1b.0 shadyabhi@shadyabhi-desktop:~$

    Read the article

  • Vim: tab-align multiple lines?

    - by Andrew Bolster
    In GUI style editors, you can generally select multiple lines, press tab a few times to move all the lines across (or shift-tab to go back). I have no idea how to do this in VIM. I googled around and couldn't find any straight answer to I came here.

    Read the article

  • Long connection times from PHP to MySQL on EC2

    - by Erik Giberti
    I'm having an intermittent issue connecting to a database slave with InnoDB. Intermittently I get connections taking longer than 2 seconds. These servers are hosted on Amazon's EC2. The app server is PHP 5.2/Apache running on Ubuntu. The DB slave is running Percona's XtraDB 5.1 on Ubuntu 9.10. It's using an EBS Raid array for the data storage. We already use skip name resolve and bind to address 0.0.0.0. This is a stub of the PHP code that's failing $tmp = mysqli_init(); $start_time = microtime(true); $tmp-options(MYSQLI_OPT_CONNECT_TIMEOUT, 2); $tmp-real_connect($DB_SERVERS[$server]['server'], $DB_SERVERS[$server]['username'], $DB_SERVERS[$server]['password'], $DB_SERVERS[$server]['schema'], $DB_SERVERS[$server]['port']); if(mysqli_connect_errno()){ $timer = microtime(true) - $start_time; mail($errors_to,'DB connection error',$timer); } There's more than 300Mb available on the DB server for new connections and the server is nowhere near the max allowed (60 of 1,200). Loading on both servers is < 2 on 4 core m1.xlarge instances. Some highlights from the mysql config max_connections = 1200 thread_stack = 512K thread_cache_size = 1024 thread_concurrency = 16 innodb-file-per-table innodb_additional_mem_pool_size = 16M innodb_buffer_pool_size = 13G Any help on tracing the source of the slowdown is appreciated. [EDIT] I have been updating the sysctl values for the network but they don't seem to be fixing the problem. I made the following adjustments on both the database and application servers. net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_sack = 0 net.ipv4.tcp_timestamps = 0 net.ipv4.tcp_fin_timeout = 20 net.ipv4.tcp_keepalive_time = 180 net.ipv4.tcp_max_syn_backlog = 1280 net.ipv4.tcp_synack_retries = 1 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 87380 16777216 [EDIT] Per jaimieb's suggestion, I added some tracing and captured the following data using time. This server handles about 51 queries/second at this the time of day. The connection error was raised once (at 13:06:36) during the 3 minute window outlined below. Since there was 1 failure and roughly 9,200 successful connections, I think this isn't going to produce anything meaningful in terms of reporting. Script: date /root/database_server.txt (time mysql -h database_Server -D schema_name -u appuser -p apppassword -e '') /dev/null 2 /root/database_server.txt Results: === Application Server 1 === Mon Feb 22 13:05:01 EST 2010 real 0m0.008s user 0m0.001s sys 0m0.000s Mon Feb 22 13:06:01 EST 2010 real 0m0.007s user 0m0.002s sys 0m0.000s Mon Feb 22 13:07:01 EST 2010 real 0m0.008s user 0m0.000s sys 0m0.001s === Application Server 2 === Mon Feb 22 13:05:01 EST 2010 real 0m0.009s user 0m0.000s sys 0m0.002s Mon Feb 22 13:06:01 EST 2010 real 0m0.009s user 0m0.001s sys 0m0.003s Mon Feb 22 13:07:01 EST 2010 real 0m0.008s user 0m0.000s sys 0m0.001s === Database Server === Mon Feb 22 13:05:01 EST 2010 real 0m0.016s user 0m0.000s sys 0m0.010s Mon Feb 22 13:06:01 EST 2010 real 0m0.006s user 0m0.010s sys 0m0.000s Mon Feb 22 13:07:01 EST 2010 real 0m0.016s user 0m0.000s sys 0m0.010s [EDIT] Per a suggestion received on a LinkedIn question, I tried setting the back_log value higher. We had been running the default value (50) and increased it to 150. We also raised the kernel value /proc/sys/net/core/somaxconn (maximum socket connections) to 256 on both the application and database server from the default 128. We did see some elevation in processor utilization as a result but still received connection timeouts.

    Read the article

  • Alsa hardware volume with PulseAudio

    - by Jan Hudec
    Before installing pulseaudio, I was able to control volume for the front (meaning on the front panel, the "headphone" jack) and rear (meaning on the back panel, the "line out" jack) separately. When I installed pulseaudio, it became possible to control volume for each playing process separately, but the individual controls for outputs disappeared. While the default device in alsa now routes via pulseaudio, the sysdefault device provides access to the hardware. But kmix does not seem to let me show them now. Is there any way to beat kmix into showing the sysdefault device too? Or something else X-based that would not fight with kmix too much? The system is Debian Jessie (testing) amd64, updated, KDE version 4:4.13.3-1.

    Read the article

  • Package Managers and Custom Installs?

    - by Miko
    Is it possible to use custom installs in conjunction with the package manager? For example, I would like to use apt-get to install EngineX because it will also install all the applicable dependencies. However, I prefer to use version 0.8.34 which I then configure to include modules that EngineX does nt come with by default. Is there some way for me to get the best of both worlds?

    Read the article

  • Host timeout during file upload/download over SFTP/SSH

    - by kritop
    I tried different clients because i thought its client related, but all of them sooner or later disconnect or stop uploading/downloading files, and getting a timeout disconnect. After a reconnect it works again for a bit of time. Really strange cannot figure out the reason. I'm on a mac and the server is a debian VPS! If u need further informations ask please! I appreciate any tips, because i'm kinda stuck!

    Read the article

  • How to add message that will be read with dmesg?

    - by calandoa
    I am trying to write some custom messages in my dmesg output. I tried: logger "Hello" but this does not work. It exits without error, but no "Hello" appears int the output of: dmesg I am using a Fedora 9, and it seems that there is no syslogd/klogd daemon running. However, all my kernel messages are succesfully written in the dmesg buffer. Any idea?

    Read the article

  • Dovecot not working pop3 with postfix

    - by samer na
    $ telnet localhost pop3 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused $ netstat -l tcp 0 0 *:www : LISTEN tcp 0 0 localhost.localdoma:ipp : LISTEN tcp 0 0 *:smtp : LISTEN tcp 0 0 localhost.localdo:mysql : LISTEN and nothing about dovecot in mail.log or mail.err when I run this service dovecot start I got start: Rejected send message, 1 matched rules; type="method_call", sender=":1.553" (uid=1000 pid=26250 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) in dovecot.conf protocols = imap imaps pop3 pop3s disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/spool/mail/%d/%n mail_access_groups = mail first_valid_uid = 106 first_valid_gid = 106 protocol imap { } protocol pop3 { listen=*:110 pop3_uidl_format = %08Xu%08Xv } protocol lda { postmaster_address = [email protected] mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } auth default { mechanisms = digest-md5 plain passdb sql { args = /etc/dovecot/dovecot-mysql.conf } userdb sql { args = /etc/dovecot/dovecot-mysql.conf } user = root }

    Read the article

  • Secure openVPN using IPTABLES

    - by bob franklin smith harriet
    Hey, I setup an openVPN server and it works ok. The next step is to secure it, I opted to use IPTABLES to only allow certain connections through but so far it is not working. I want to enable access to the network behind my openVPN server, and allow other services (web access), when iptables is disabaled or set to allow all this works fine, when using my following rules it does not. also note, I already configured openVPN itself to do what i want and it works fine, its only failing when iptables is started. Any help to tell me why this isnt working will appreciated here. These are the lines that I added in accordance with openVPN's recommendations, unfortunately testing these commands shows that they are requiered, they seem incredibly insecure though, any way to get around using them? # Allow TUN interface connections to OpenVPN server -A INPUT -i tun+ -j ACCEPT #allow TUN interface connections to be forwarded through other interfaces -A FORWARD -i tun+ -j ACCEPT # Allow TAP interface connections to OpenVPN server -A INPUT -i tap+ -j ACCEPT # Allow TAP interface connections to be forwarded through other interfaces -A FORWARD -i tap+ -j ACCEPT These are the new chains and commands i added to restrict access as much as possible unfortunately with these enabled, all that happens is the openVPN connection establishes fine, and then there is no access to the rest of the network behind the openVPN server note I am configuring the main iptables file and I am paranoid so all ports and ip addresses are altered, and -N etc appears before this so ignore that they dont appear. and i added some explanations of what i 'intended' these rules to do, so you dont waste time figuring out where i went wrong : 4 #accepts the vpn over port 1192 -A INPUT -p udp -m udp --dport 1192 -j ACCEPT -A INPUT -j INPUT-FIREWALL -A OUTPUT -j ACCEPT #packets that are to be forwarded from 10.10.1.0 network (all open vpn clients) to the internal network (192.168.5.0) jump to [sic]foward-firewall chain -A FORWARD -s 10.10.1.0/24 -d 192.168.5.0/24 -j FOWARD-FIREWALL #same as above, except for a different internal network -A FORWARD -s 10.10.1.0/24 -d 10.100.5.0/24 -j FOWARD-FIREWALL # reject any not from either of those two ranges -A FORWARD -j REJECT -A INPUT-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT-FIREWALL -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT-FIREWALL -j REJECT -A FOWARD-FIREWALL -m state --state RELATED,ESTABLISHED -j ACCEPT #80 443 and 53 are accepted -A FOWARD-FIREWALL -m tcp -p tcp --dport 80 -j ACCEPT -A FOWARD-FIREWALL -m tcp -p tcp --dport 443 -j ACCEPT #192.168.5.150 = openVPN sever -A FOWARD-FIREWALL -m tcp -p tcp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -m udp -p udp -d 192.168.5.150 --dport 53 -j ACCEPT -A FOWARD-FIREWALL -j REJECT COMMIT now I wait :D

    Read the article

  • How can I fix puppet refusing to start and asking for "master.pp"?

    - by cwd
    I'm using the very latest version of puppet and have been following the Apress "Pro Puppet" guide step by step. I have installed puppet sudo aptitude install ruby libshadow-ruby1.8 sudo aptitude install puppet puppetmaster facter I have edited /etc/puppet/puppet.conf to include certname [master] certname=puppet.mydomain.com I have edited /etc/hosts and added the following line 127.0.0.1 puppet.mydomain.com puppet I have set the hostname of the server echo "puppet.mydomain.com" > /etc/hostname hostname -F /etc/hostname And then I try and run puppet from the command line. puppet master --verbose --no-daemonize And puppet gives me this error: Could not parse for environment production: Could not find file /master.pp I'm running all commands with sudo and the last line of the error message always says that it can't find master.pp and the path before it is to my current working directory. What am I doing wrong? I should also mention that I don't have a DNS record set up for puppet.mydomain.com - I saw some online documentation mentioning this might be a problem - however I was fairly sure that the hosts file would let me get around that.

    Read the article

  • Reboot VPS by reaching memory limit

    - by Ali
    When a server uses memory more than available RAM, the system will shut down the virtual machine. Then, it is only possible to boot from outside (VPS control panel, e.g. vePortal or SolusVM). However, it should be possible to plan a reboot before possible shut down. What is the best practical method to check the used memory, and reboot the system upon reaching e.g. 90% of the allowed RAM? Is there a common program or script to do so? I am using Debian/Ubuntu.

    Read the article

  • SELinux Contexts

    - by Josh
    I am configuring Apache\PHP and noticed Apache complaining about permissions with the php shared object. Starting httpd: httpd: Syntax error on line 206 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib/httpd/modules/libphp5.so into server: /usr/lib/httpd/modules/libphp5.so: cannot restore segment prot after reloc: Permission denied I looked at the context (started fine with enforcement off) and found: [root@HDSSERVER conf]# ls --lcontext /usr/lib/httpd/modules/libphp5.so -rwxr-xr-x 1 root:object_r:httpd_modules_t root root 15565418 May 10 08:39 /usr/lib/httpd/modules/libphp5.so Shouldn't httpd (apache) be able to access files with a context of httpd_modules_t? I got it fixed by applying chcon -t textrel_shlib_t '/usr/lib/httpd/modules/libphp5.so' But I would think the httpd version would work before this one. Can someone explain this to me?

    Read the article

  • Apache only transferring partial content from a Samba share

    - by thaBadDawg
    I have an Apache server running on CentOS 5.3. It currently hosts 12 sites with no known issues. (I say this to point out that up to this point my Apache installation has performed flawlessly) I'm adding a new site where the DocumentRoot of the new VirtualHost is a Samba share. When at the command line of the server I can cp video.m4v ~ and the whole file is copied properly to my home directory. But when I try to access the file from IE/Firefox/Safari/Chrome it only passes back a partial result of 33k. The same thing is happening with my image and audio files. If I make the files local to the server by copying them from the share and then serving them up then the files transfer. Any ideas?

    Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >