Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 360/805 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• Windows XP doesn't like small subnets?

  - by erniedwork

  This totally sounds like a bug to me, because my subnet mask and IP address should be valid by all accounts. My ISP has assigned me a fixed IP address of 65.110.7.20, with a subnet mask of 255.255.255.252. Which sounds about right, because we're trying to set up a router with a /31 network - just 4 ip addresses. But when I try to set this IP and netmask up in Windows XP, I get the following error: "The combination of IP address and subnet mask are invalid. All of the bits in the host address portion of the IP address are set to 0." But they're not all set to 0. That would be a subnet mask of 255.255.255.255. Even then, that too is a valid subnet mask, consisting of a network of 1 IP address. Is there a way around this? A registry hack maybe?

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• VMWare Player disrupting Samba on Ubuntu 9.04 host?

  - by TonyUser

  I've had Ubuntu 9.04 running on this computer for a while now. I just installed VMWare Player on my system and now when I try to browse the network in the Ubuntu host all the computers will show up one time only. If I try to browse again, no computers appear and even the workgroup is missing. I have to run: sudo /etc/init.d/vmware stop sudo /etc/init.d/samba restart to get the network visable again. As long as VMWare Player is stopped Samba seems fine. I guess it's got to do with the virtual adaptors that VMWare installs. Is there a way to get them both to work, or did I just miss-configure something?

  Read the article

• Where in a typical rendering pipeline does visibility and shading occur?

  - by user29163

  I am taking a computer graphics course. The book and the lecture notes are vague on the on the order of flow between the different steps in the rendering process. For example, if we have specified a view in a scene, and then want to perform a projection transformation for that given view, then we have to go through a sequence of transformations. In the end we end up with a normalized "viewcube" ready to be mapped 2D after clipping. But why do we end up with a cube (ie 3D thing), when a projection results in projecting the 3D objects to 2D. (depth information is lost?) The other line of reasoning is that all information further needed is stored within the "cube" and that visibility detection and shading is performed with respect to this cube and then we perform rasterezation.

  Read the article

• Relating ping to perceived browser GUI response

  - by cvsdave

  We periodically get complaints of poor GUI (browser page) response that we need to explore. I am looking for a quick and cheap first check to see if the issue is network latency, or server performance. Has anyone encountered any discussion of ping time and perceived GUI response? I understand that GUI response is complicated, but it would be nice if we could find or develop a rule of thumb along the lines of "Hmmmm, ping is over 200, it might be network problems". Ideally, this lives in a script on the user's machine so that we can see the latency that they are seeing... (BASH, Linux). A reference to a good discussion page would be a fine answer, as would any recommendation of other source material.

  Read the article

• How do I log in to the ubuntu 10.04 server using grub2 from a remote computer/terminal with GUI running

  - by Steve Cornall

  I upgraded my server from ubuntu 8.04 to 10.04. It now uses the grub2 bootloader. In 8.04 from the grub log-in page I could select the option log in to server and thereby connect through SSH directly to my server and have the GUI running. I can currently log in to my upgraded server now from any of my 8.04 machines using grub1 with the GUI running. I cannot log in that way from a machine that uses grub2 and ubuntu 10.04. I want to upgrade my entire network to ubuntu 10.04 but cannot until I know how to log in to the network from grub2 with the gui open. I have exhausted all my ideas as to the solution to this problem. Any help would be most appreciated. Thank-you

  Read the article

• Running a dhcp server on windows 7 ultimate

  - by nikhil

  I'm trying to get my HP T5740 thin clients to connect to my local network without much success. I asked a question here but haven't got any response. I think that question should have been posted on serverfault instead. I was thinking that the problem seems to be that the thin clients aren't able to get an IP address when they are connected and I can't manually set it. So if I was to somehow set up a dhcp server on the network with my server that runs a 32 bit version of windows 7 ultimate edition. How do we set up a dhcp server in windows?

  Read the article

• vmware workstation shared vm remote connection

  - by user1875332

  I'm running vmware workstation 9 on a dedicated server so I can connect to my virtual machines from a remote connection using workstation 9 as well. I've gone ahead and shared the VM, but I've searched all over and can't seem to figure out how to connect to the shared vm. What do you put as the Host/IP, user, pass? Is it of the shared vm, or the host vm? Is there some other settings you need to do as well? I'm completely stumped. Most of the videos I see seem to be people using shared vm's on the same network, not a remote network.

  Read the article

• local wordpress installation not accessible from the outside world

  - by hello

  I have a working installation of wordpress located in /var/www/html/wordpress It is accessible in my local network at [local-machine-ip]/wordpress/ There is also a test page located in /var/www/html/test.html It is also accessible in my local network at [local-machine-ip] I would like the wordpress website to be accessible from the outside world. I know that my ISP blocks incoming requests on port 80, so I set my router to redirect requests from port 8080 to 80. This feature appears to be working correctly since I can access the test.html page using my public ip address as follows: [public-ip]:8080 However, I cannot access [public-ip]:8080/wordpress Here is my Apache config : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/html ServerName [my.domain.com] <Directory /var/www/html/> Options FollowSymLinks Indexes MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Thanks!

  Read the article

• Backup restore issue

  - by rrahman_bd

  I have a windows server 2008 with exchange database full backup. Now for testing purpose i want to restore that full server to a VM. I have copied the whole backup to VM01 and took it to Private Network. And now i want to take backup from VM01 and restore it to VM02. Both are at private network. I was able to find VM02 test backup by searching in VM1. But the copyed restore file is not showing in the window !!! Is there any policy so that i can not restore except from the original location?

  Read the article

• OpenVPN and brouting issue

  - by JavierMartinz

  I have a Guest XEN Machine in which I want to connect by OpenVPN to other network. But I have this problem: when I want to connect to that OpenVPN I get a lot of TLS handshake errors because I think that the packages did not come rightly. When, at the end, the guest machine achieve to connect (after several tries) I can't ping the other machines of the OpenVPN network. Except sometimes, where if I ping 20 times MAYBE i get ping-answer in 1-2 times. I think that this problem is related about how the HOST Xen machine 'filters' the packages to the bridge. I mean, I think that all the outgoing guest machines packages are good but the incoming traffic to the guests is not recognized well. How could I detect/solve the problem? Im using Debian Linux in both machines

  Read the article

• linux static ip problem

  - by out_sider

  I have a serve running centOS and I'd like to have the following setup: The server needs to have a static ip and be accessible by name. What I want is independently of the network being able to connect the server to the network and access it by name on Firefox as it will be running a web page. I tried setting the ip manually but while the inet addr is set as I want it the Bcast isn't. And I only can ping the server on the Bcast ip and because it is 192.168.2.255 ssh says it's not valid.

  Read the article

• How to set up a local webDAV server for use with Goodreader on the ipad?

  - by confused-about-webdav

  I need to know how to set up a local webDav server on my PC so that goodreader on ipad can automatically sync with it over the local wifi network? I am really a rookie when it comes to setting up a web server and have tried various guides on the internet. I tried setting up a webdav server using IIS and forwarded the required ports and enabled webdav publishing but goodreader can find it in the local wifi network automatically nor is it able to connect even after manually entering the credendtials. So i'll be really greateful if someone who has successfully setup a webdav server for use with goodreader can point me on how to do it?

  Read the article

• How to specify the order of startup scripts (CLI)?

  - by bcsteeve

  Startup really confuses me. It seems various methods for starting things happen in different locations all over the place. But is there a way to define the order they are loaded? Specifically... I have an issue where Plex Media Server (PMS) can't be discovered by clients if the server's VPN connection is established prior PMS starting. It was driving me nuts, but I discovered that I could solve the problem by shutting down PMS, shutting down the VPN, turning on PMS and then turning on VPN. I'm not exactly sure how PMS auto-loads itself at startup, but the VPN is something I defined by editing: /etc/network/if-up.d/slickvpn with the following: #! /bin/bash REQUIRED_CONNECTION_NAME="Wired connection 1" VPN_CONNECTION_NAME="myvpn" activ_con=$(nmcli con status | grep "${REQUIRED_CONNECTION_NAME}") activ_vpn=$(nmcli con status | grep "${VPN_CONNECTION_NAME}") if [ "${activ_con}" -a ! "${activ_vpn}" ]; then nmcli con up id "${VPN_CONNECTION_NAME}" fi That's a script I found somewhere (I think on this site) when looking for help autoconnecting a VPN. So I guess /etc/network/if-up.d/ scripts are initiated prior to the PMS service. How can I flip that? Or other solution?

  Read the article

• Iis multiple domain binding

  - by user2979484

  I've a server with vshpere running and one vm with Windows 2008 r2. I'm hosting a website on this vm. But I want to try to add another domain. Now I have 3 ip-adresses. 1 for vspehere. 1 for vm. 1 for 2nd domain. When I add a new site and edit the bindings to the last ip-adress (2nd domain) it doesn't work. I've added also a new network adapter on vsphere and edited in the windows network adapter. Could anyone help me out with this. Sorry for my bad english I hope you will understand it.

  Read the article

• remove an open wifi of a service provider near my house

  - by wannik

  I'm using Win 7. There is an access point of a service provider wifi near my house. The wifi is not free and not WEB/WPA protected. Everyone can connect to it and it will show the company's login page. (if the username/password are put correctly, their customer can use the net.) I'm not the customer of the company and have my own access point in my house. But my computer always connect to the network of that company. I tried to remove the network but it keep coming back and connect to that access point instead of mine. What can I do to make my computer choose my access point first?

  Read the article

• Setting primary IP for VPS (out of 2 available)

  - by Flyer

  I've got a little problem. My VPS (Debian box) has 1 primary IP address, but now my hosting provider decided to assign me another one due to problems with first one. Let's say new IP is 91.222.152.20 and old one 91.221.190.170. How should I make 91.222.152.20 primary one, so that everything works on this address instead of 91.221.190.170 (like ftp, mysql etc) I tried editing /etc/newtwork/interfaces setting iface eth1 inet static address 91.222.152.20 netmask 255.255.252.0 network 91.222.152.0 broadcast 91.222.155.255 gateway 91.222.152.1 I know that network is 91.222.152.0/22 so I assume that above configuration should be right. Saved, rebooted and that ended pretty bad. Couldn't even ping box on old or new IP. Had to revert to working one. So question is. What am I doing wrong and how to do it right?

  Read the article

• Separate 2 networks with 1 Windows Server

  - by SamuGG

  The situation is: I have 1 router 192.168.1.1, 1 switch, 1 windows server and a basic LAN of devices accessing it. I need to split into 2 separate LANs with full Internet access each, but isolated from each other. Given that, the server is a Windows Server 2008 R2 with 2 NICs: NIC1: 192.168.1.2 NIC2: 192.168.2.2 The router has no dhcp configuration. Please, can anyone explain gracefully, step by step, what do I need to do? What would be the 2 NICs full configuration? What services do I need to install? I don't want devices on either network to see devices on the other network, they must be completely separate. I guess I'm missing the routing procedure step, but I have no idea how is that done. For example: tell the server that devices with gateway 192.168.2.2 must send traffic for internet to 192.168.1.1 router. Thanks in advance.

  Read the article

• Pushing image changes to multiple servers

  - by gms8994

  I need the ability to push images out to multiple servers whenever they're updated. I've looked at Network Filesystems, but they're all but worthless due to their speed. Images can be uploaded to any one of 3 servers, and would then need to be copied to the other 2. Any suggestions? I'm open to try just about anything. EDIT: Graphics data (jpg, gif, png, etc). Linux only. We're currently using rsync. But having it work back and forth is getting cumbersome. It's all local network.

  Read the article

• process ksoftirqd consumes permanent 15% CPU load [closed]

  - by markus

  Possible Duplicate: Anyone else experiencing high rates of Linux server crashes during a leap second day? The process ksoftirqd/0 uses permanent 15% CPU on our debian squeeze server. 4 root 20 0 0 0 0 R 15.0 0.0 850:59.17 ksoftirqd/0 I already read that this can have various reason like Full harddisk or high network traffic. In our case we do have more or less low network traffic and enough space on hard disk. How can I analyse what causes ksoftirqd/0 to use permanently 15% CPU?

  Read the article

• Run command on init and restart on errors

  - by chersanya

  I have internet access on my PC through proxy through SSH, so every time I need to execute ssh -L PORT:SERVER:PORT LOGIN@SERVER and then type a password. After each network failure or reconnect this command has to be executed again. I've got bored of it and look for a way to do this automatically: first run this after boot (it doesn't seem to be a problem - put this command in some init file and that's all) and then rerun it (if possible, then type password) on each network failure. Is it possible, and how? OS Linux (Debian)

  Read the article

• What is the best appliance you've used?

  - by phuzion

  Post your favorite appliances or "all-in-one" programs. Whether it runs in a virtual machine, or on its own hardware, it all goes. My submission is Untangle. It's an open source network gateway (their term). Essentially, it can run a plethora of things that you may otherwise end up buying another appliance for: Web filtering logging mail spam filtering phishing monitor spyware blocking VPN You name it, it's all there. Best of all, it's mostly free. A few appliances have annual costs due to inherent licensing or subscription costs. If you are looking for a new network perimeter device, definitely check it out. The underlying OS doesn't matter, because it's the application we want to praise, not the OS beneath it.

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• For very beginning startup: home server or EC2?

  - by StCee

  The micro instance of Amazon EC2 only has ram of 613MB, my laptop got 8GB. And I suppose likewise the processing power of my computer would be better than the micro instance. My question is, what are the considerations in deciding to host yourself or on Amazon EC2, especially for a really baby startup? For example, would network speed be a problem? My computer broadband network is 100Mbs up to 1Gbs. What would Amazon compare to this? My site at these moment would just host some images and perform some php requests. I would probably also use cloudflare but seems it increases the dns lookup time considerably... And of course the overall objective is to make the best user experience.

  Read the article

• Use server git installation in GitHub for Windows

  - by Lg102

  We are using Git as the version control for our website development. I work from a laptop, which is connected to the internal network via a WiFi connection. I've mapped the server drives as network drives in Windows. Commands such as git status take significantly longer for me than they do for my co-workers on wired connections. When connecting to the server using SSH and running commands on the git installation there, performance is even better. Is there a way to configure GitHub for Windows to use the server-installed git (with my credentials)? Note: While our production servers has a user configuration with proper permissions, the development server has only one root user.

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >