Search Results

Search found 20116 results on 805 pages for 'network flow'.

Page 361/805 | < Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >

• How can I redirect HTTPS(S) traffic to anothr gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. Al the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for this I am using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway without touching the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a dnat like DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case

  Read the article

• Is it possible to restrict the connection duration per client on the router (say with OpenWRT)?

  - by static

  How to limit the connection duration per client per period (say, one MAC-address can connect only for 3 hours per week to the network). Where could be defined such a rule? In the firewall? So the rule should define not statically times (this is simple), when the client is allowed to access the network, but the duration of the connection per day/week/month, etc. How/where to implement such rules? Is it possible to do so with OpenWRT/DD-WRT?

  Read the article

• Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

  - by IronicMuffin

  I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

  Read the article

• Windows Server VPN: Error 720

  - by Nikita Zernov

  I want to created vpn server on Windows Server 2012. First I installed Active Directory domain services, then Remote Access server role. Opened Gettng Started Wizard, entered configure just vpn. Then in Routing and Remote access selected Configure and Enable Routing and Remote Access. There selected custom configuration, vpn. Then created user in active directory and allowed network access permission. After this I tried to connect to vpn from windows 8. I get the following error: Error 720: A connection t the remote computer could not be established. You might need to change the network settings for this connection. What should I do?

  Read the article

• Remote Destkop into Server 2008R2 with Firewall On

  - by Eternal21

  I've got a fresh install of Remove Server 2008 R2, 64 bit. The problem is I can't Remote Destkop into it. I clicked 'Enable Remote Desktop' inside 'Initial Configuration Tasks', and set it to: Allow connections only from computers running Remote Destkop with Network Level Authentication (more secure). The thing is, this used to work just fine, and then it stopped. The only way I can get it to work now is if I turn of Windows Firewall completely off (Public network location settings). Obviously I don't want to run the server with firewall off, so what specific settings in Firewall do I need to disable, or am I doing something wrong?

  Read the article

• Setting nagios location in map

  - by Mech Software

  I have Nagios installed and I'm working on getting the network map correct. The problem I have is that "Nagios" appears to be in the "internet" when it should be located on the MechNAS server. What I want is Nagios Process to show up inside the local network. So it should show up at the same layer as MechNAS and development. Where exactly is that configured? I didnt see any place to set that up and it looks now like it's out there on it's own. Documentation and Googling didnt seem to turn up anything either.

  Read the article

• Remotely initiate windows updates

  - by TetraFlash

  I have a network with countless workstations on it and the windows updates are done through WSUS in push cycles to allow us to use a generic image and configuration and avoid network congestion. I have a number of workstations in storage that are connected once a month for a few days to recieve updates, however not all of them fall within their push cycle. I want to avoid going to each machine and clicking "check updates" as that would require me to connect a monitor, mouse and keyboard. Is there a way (preferably through powershell but im open minded) to initiate a check and install of updates on a remote system? Lets say for 1 system at a time right now, I can add a file reader and a look later. NOTE: the configuration of the WSUS server is above my pay grade, im simply being asked to ensure these machines are updated. Thanks for any help or hints

  Read the article

• "net use /delete" question

  - by tinmaru

  I want to delete a network connection. When I type net use I get this: Microsoft Windows XP [version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\totonet use État Local Distant Réseau OK M: \192.168.5.138\share Réseau Microsoft Windows OK R: \192.168.2.18\tools Réseau Microsoft Windows OK \192.168.2.43\data Réseau Microsoft Windows La commande s'est terminée correctement. The syntax for deleting a network map is : net use /delete X: if I want to delete a specific connection net use /delete * * if I want to delete all connections. How can I delete the \192.168.2.43\data connection which, as you can see, is not link to any logical letter?

  Read the article

• monitor internet bandwidth on LAN

  - by Dimal Chandrasiri

  I'm on a office network and there are around 12 PCs that are connected to a switch and then to a Prolink Router. Now the Internet connection is very slow and I'm the one who manage all the computers. I want to monitor bandwidth usage of each computer on the LAN. how can I achieve this using my computer. I cannot install any software on the client computers other than mine. I tried wireshark but, it only shows my network usage so there is no use with the data I get from it. Is there any specific software that I can use within my PC to get the bandwidth details of other computers. I'm on a windows 7 x64bit PC with admin privileges. Thank you.

  Read the article

• How to connect to two VPN connections at the same time in Mac?

  - by Sallar Kaboli

  Hello, I have a problem with my vpn connections, my ISP requires me to connect to a private vpn server of it's own in order to connect to internet, im connected to main network via WiFi, but i also want to connect to another VPN network of my choice (to bypass internet limitation in my country of course), i am able to do that in Windows, but its not working in Mac OS X Snow Leopard second vpn connecion type is PPTP / CHAP How can i do that? as u see in the pic, both vpn's are connected, first one is for main internet which is working properly , second one is also connected but its not affecting anything. its just connected. http://www.freezpic.com/pics/a5231c3e80501a3c25430f43c1ef5856.png

  Read the article

• Creat a new Domain Server

  - by priyadarshi

  If I will make new Domain Server for 100 users,what will be hardware ,software and network requirments ?

  Read the article

• When using Windows 2003 DNS Server, how do I configure it to resolve a particular FQDN but rely on e

  - by Corey

  Let's say I have a web-server on my internal network which is behind a NAT router. I have my external DNS for the “xyz.com” domain configured with an A record for “foo” that points to my router's public address. I want my internal network clients to resolve foo.xyz.com to the internal address. However, this is the only xyz.com record that should point to an internal address. Do I need to create a primary zone for xyz.com and mirror all the records from my external zone with the exception of “foo” (this is what I am doing now), or is there a better way?

  Read the article

• Central Storage for windows user accounts homedirs .. hardware/software needed?

  - by mtkoan

  We have ~120+ users in our network, and are endeavoring to centralize logon authentication and home directory storage server-side. Most of the users are Windows 2000/XP machines, and a few running Mac OS X. Ideally the solution will be open-source-- can this all be managed from a Linux server running LDAP and Samba? Or would a hacked-NAS Box with a FreeNAS or similar suffice? Or is Micro$oft's Active Directory really the preference here. Is it viable to store PST files on this server for users to read from and write to? They are very large ~1.5gb. We have no mail server (or money) capable of Exchange or IMAP, only an old POP3. What kind of hardware horsepower and network architecture should we have for this kind of thing?

  Read the article

• SSH logins failing before success

  - by Vincent

  I am running Ubuntu 12.04 Server, updated, to run a webserver on Tomcat 7. I have about 1000 clients that are very very often using an RSYNC program to sync some file with this server. Those RSync are using SSH with a certain user to open connections on the server. The result is that my server is, as normal, full of connections by the same user. About 5 connections per 1 second every day any time. Then, when I try to open a regular SSH connection with my Putty client, the connection fails before login saying "Server unexpectedly closed network connection", about 6 times for 10 attemps, anbd for 4 attemps out of 10, it works normally and I am able to login as any user. Is there a overload of connections here? The server statistics are very calm saying less then 40% of network usage and less of 2% CPU. How can I improve this? Thank you for any help. V.

  Read the article

• need help setting up a VPN for remote computer connection

  - by Chowdan

  I am on a low budget right now. I am currently in the process of starting a computer company. I am in need of a VPN network so I can run Dameware tools for working on customers/partners computers remotely. I will be working with Windows and some Apple and linux machines. I have desktop with an AMD Phenom II 965BE(currently running stable at 3.8Ghz) processor with 8 GB of ram and a radeon hd 6870(i know graphics aren't too useful) and about 1.5TB of HDD space. I am attempting to create a network out of my office based all on one machine that would also be secure for me to remotely connect to my partners computers so when they have issues I would be able to connect and do the diagnosing and repairs remotely. What types of servers besides a VPN server would i need to create this? I have access to all Microsoft products so I can run Windows Server 2012, Windows Server 2008 R2, or any other Microsoft Software. thanks for the help all

  Read the article

• Wireless problems with Broadcom BCM4313 with windows7 (duplicate)

  - by user292394

  I have wireless connection problem can't connect my wireless adress lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no lsmod Module Size Used by bnep 19624 2 rfcomm 69160 8 ip6t_REJECT 12939 1 xt_hl 12521 6 ip6t_rt 13537 3 nf_conntrack_ipv6 18894 8 nf_defrag_ipv6 34768 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17717 10 xt_limit 12711 13 xt_tcpudp 12884 18 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 8 nf_defrag_ipv4 12758 1 nf_conntrack_ipv4 xt_conntrack 12760 16 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12770 0 nf_nat 21798 1 nf_nat_ftp nf_conntrack_ftp 18638 1 nf_nat_ftp nf_conntrack 96976 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 ip_tables 27239 1 iptable_filter vx_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT uvcvideo 80885 0 videobuf2_vmalloc 13216 1 uvcvideo videobuf2_memops 13362 1 videobuf2_vmalloc snd_hda_codec_hdmi 46207 1 videobuf2_core 40664 1 uvcvideo videodev 134688 2 uvcvideo,videobuf2_core snd_hda_codec_conexant 57441 1 snd_hda_intel 52355 8 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 dm_multipath 22873 0 snd_seq_midi_event 14899 1 snd_seq_midi scsi_dh 14882 1 dm_multipath lib80211_crypt_tkip 17619 0 snd_rawmidi 30144 1 snd_seq_midi intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel joydev 17381 0 serio_raw 13462 0 snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi intel_ips 18664 0 wl 4207846 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi btusb 32412 0 bluetooth 395423 22 bnep,btusb,rfcomm snd_timer 29482 2 snd_pcm,snd_seq snd 69238 26 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi lib80211 14381 2 wl,lib80211_crypt_tkip toshiba_bluetooth 12852 0 cfg80211 484040 1 wl lpc_ich 21080 0 fglrx 8085343 190 soundcore 12680 1 snd toshiba_acpi 22901 0 sparse_keymap 13948 1 toshiba_acpi wmi 19177 1 toshiba_acpi amd_iommu_v2 19054 1 fglrx video 19476 0 mei_me 18627 0 mei 82276 1 mei_me mac_hid 13205 0 parport_pc 32701 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 52570 0 hid 106148 2 hid_generic,usbhid psmouse 102222 0 ahci 25819 3 libahci 32168 1 ahci atl1c 46086 0 dm_mirror 22135 0 dm_region_hash 20862 1 dm_mirror dm_log 18411 2 dm_region_hash,dm_mirror Can someone give any ideas on how I can fix my wireless

  Read the article

• What IP's should the servers be assigned?

  - by user273284

  I have got 4 subnets (calculated using online calculators) The major network is: 172.16.0.0/16 The students subnet having the highest IP requirement /22 mask gets 172.16.0.1 - 172.16.3.254 as assignable IP's Staff subnet /23 mask gets 172.16.4.1 - 172.16.5.254 as assignable IP's Management subnet /27 mask gets 172.16.6.1 - 172.16.6.30 as assignable IP's Servers subnet /27 mask gets 172.16.6.33 - 172.16.6.62 as assignable IP's Should I follow this IP addressing scheme or should the servers get the first 30 IP's of the network i.e. 172.16.0.1 - 172.16.0.31 ? What is the best practice?

  Read the article

• Retrieve Ip Adress

  - by kareemsaad

  I want any way to know who take my IP from my network place in my company

  Read the article

• How can I connect Ubuntu Server 10.04 virtualbox without router from my local computer?

  - by kjaja70

  I installed vbox I installed ubuntu server 10.04 on my vbox I want to connect from my win 7 desktop with putty to my server. On the settings in my vm vbos I choose - network. enable network - bridged adapter. I fount in ifconfig the ip address. Putty cant connect to the server. Why? How can I connect Ubuntu Server 10.04 virtualbox from my local computer? p.s. I dont have router - I have modem. Thanks a lot.

  Read the article

• Resolving Domainnames differently for different services

  - by mlaug

  Some time ago we had an issue with our network infrastructure and php with curl. Our Network infrastructure is fairly simple. LoadBalancer/Firewall = 5 servers The Domainname of our website is set to the ip of the Loadbalancer, of course. But calling curl from one of the servers did result in a timeout. It appears that a server could not call for its own domain it is serving. So we had to set the domains via /etc/hosts to the sever itself. But now We have implemented a Varnish in front of the Loadbalancer, which we want to automatically purge, once a change on a page happens. So now we need to call the domain www.example.com/url_to_purge. Sadly this call what be resolved to the server itself instead of the varnish, because of the /etc/hosts entries. So now I am wondering, if you could resolve domain names differently for different services :)

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• Can one use Airport (Time Capsule) with an external DHCP server?

  - by DNS

  I currently share my DSL connection using a wireless router with DHCP disabled, and dnsmasq running on a Mac Mini serving DHCP & DNS. This setup is important because I have clients doing PXE boot, and I need the control over DHCP that dnsmasq provides. There is also a Time Capsule on the network that's used purely as a backup device; its wireless functions are disabled. The wireless router is starting to get a little flaky, and since it doesn't support 802.11n I'd like to replace it. Rather than buying a new router, I'd like to just use the Time Capsule. But I see no way to disable its DHCP server; when I set the connection type to PPPoE, it insists on serving DHCP. Is there any way to use Airport PPPoE with a DHCP server elsewhere on the network?

  Read the article

• How can I install a scanner by IP?

  - by user54266

  I'm trying to install a scanner by IP the same way you would install a printer by IP. I don't want to install the horrible HP Solution Center software but I don't know how to install a network scanner without the software. I'm having a hard time googling this because when I search for things like "install network scanner" or "install scanner by IP" all the results are for things like Angry IP Scanner which is clearly different than what I'm trying to get. Thanks in advance. This is for Windows Vista, but Windows 7 instructions will do.

  Read the article

• Rewritten NetBeans Platform Feed Reader Tutorial

  - by Geertjan

  The next tutorial that has been thoroughly restructured and rewritten is: NetBeans Platform Feed Reader Tutorial Originally written by Rich Unger, it was one of the very first NetBeans Platform tutorials that ever existed. In this particular rewrite, the entire structure of the tutorial has changed, in an attempt to make the flow more "bite size", rather than a big lump. Also, thanks to recent NetBeans Platform changes, there are no Bundle files anymore, all Strings are declared via @Messages annotations. Theoretically, the browser in the application could be a JavaFX WebView, though the browser part of the application isn't a central theme of the tutorial, hence only a reference is made to the JavaFX alternative. Here's what it looks like: Comments to the NetBeans Platform Feed Reader Tutorial are, as always, very welcome. 

  Read the article

• Can I create an Infrastructure access point from built-in WiFi (as opposed to Ad-Hoc) on Windows XP?

  - by evilspoons

  I want to use my Windows XP laptop as an access point. What I am trying to achieve is possible under Windows 7 with a myriad of utilities, but the wireless driver stack was different before Windows 7 and those specific APIs don't exist on XP. The reason behind me wanting to do this is that I would like my Android phone to be able to connect via WiFi to a network that is only hard-wired (reverse tethering). Unfortunately, my Android device (Galaxy S Captivate) does not support ad-hoc networks without a serious amount of screwing around. Is it possible to create an "Infrastructure" network with my Dell Latitude D830's built-in WiFi - a "Dell Wireless 1395 WLAN Card", which I am assuming is probably rebadged Broadcom, or is there some fundamental difference between a wireless adapter and an access point that would prevent this?

  Read the article

< Previous Page | 357 358 359 360 361 362 363 364 365 366 367 368  | Next Page >