Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 365/985 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

• Remotely accessing the openfire installed on fedora machine

  - by KItis

  HI , I have installed Openfire on fedora machine. i can start the openfire on this machine and it runs on the localhost. But i can not access openfire remotly as follows http://xxx.xxx.xxx.xxx:9090 i have desabled ip tables on this computer also when i do telnet for port 9090 on the localhost , it works could some one help me to get this working Thanks in advance for any help

  Read the article

• arp -n responds with (incomplete) on the wrong subnet, can't remove it

  - by Hannes

  context There are 2 servers: server1 - eth0 10.129.76.16 eth0.2 192.168.0.103 server2 - eth0 10.129.79.1 eth0.2 192.168.62.101 The 192.x.x.x addresses are connected to the same vlan (vlan2) and are able to see eachother. The 10.x.x.x addresses are connected to different vlan's which are not able to see eachother. on request of David Swartz: the routing table on server 1 is: ~$ sudo route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.129.76.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.192.0 U 0 0 0 eth0.2 0.0.0.0 192.168.61.254 0.0.0.0 UG 100 0 0 eth0.2 the routing table on server 2 is: ~$ sudo route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 <public IP gw> 0.0.0.0 UG 100 0 0 eth0.11 10.129.79.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 <public IP> 0.0.0.0 255.255.255.128 U 0 0 0 eth0.11 192.168.0.0 0.0.0.0 255.255.192.0 U 0 0 0 eth0.2 Problem: When I ping from server 1 to server 2, it seems no packets are arriving and vice versa. When I check the routes (route -n) I see the default gw uses eth0.2 on both servers. But when I use arping, I get a response one way (from server 2 to server 1) but no response vice versa. arping 192.168.62.101 ARPING 192.168.62.101 from 10.129.76.16 eth0 ^CSent 2 probes (2 broadcast(s)) Received 0 response(s) As you can see it uses the 10.x.x.x address instead of the 192.x.x.x. And as I told before, the 10.x.x.x address is unreachable from the other server. When I force arping to use eth0.2, it does work. I don't have any problems with ping'ing other servers from any of those 2 servers. I did see this in the arp tables: ~# arp -n | grep 192.168.0.103 192.168.0.103 (incomplete) eth0 and ~# arp -n | grep 192.168.62.101 Question quite obvious... How can I make these servers see each other again? Things I've tied clear the apropriate entries in the arptable and tried to get rid of the (incomplete) But I think the biggest problem is that eth0 is used instead of eth0.2 for the packets from server 1 to server 2 Because of David Swartz' remark about the routing tables, I added a route in there defining the host. I added 192.168.0.103 0.0.0.0 255.255.255.255 UH 0 0 0 eth0.2 and 192.168.62.101 0.0.0.0 255.255.255.255 UH 0 0 0 eth0.2 to the appropriate servers but this didn't solve the problem so I presume the problem is not in the routing. My guess I guess the problem lies in the following. ~$ arp -n | grep 192.168.0.103 192.168.0.103 (incomplete) eth0 but I'm unable to remove this entry. (arp -d 192.168.0.103 has no effect) Thanks for reading and even more thanks for answering!

  Read the article

• Subdomains not working with virtual hosts on apache2 ubuntu

  - by cy834sh4rk

  I'm trying to set up a subdomain on my ec2 account but can't figure out what's going on. I've looked for a few hours and haven't been able to find an answer :-/ I'm trying to set up a subdomain using virtual hosts but no matter what I try the browser can't find the subdomain :-( I have the following vhosts files set up: apache2/sites-available/mysite (this site currently works) <VirtualHost *:80 ServerName mysite.com ServerAdmin webmaster@localhost DocumentRoot /home/sites/mysite <Directory /home/sites/mysite Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory ErrorLog ${APACHE_LOG_DIR}/mysite-error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/mysite-access.log combined </VirtualHost apache2/sites-available/red (this is the subdomain I'm trying to set up) <VirtualHost *:80 ServerName red.mysite.com ServerAdmin webmaster@localhost DocumentRoot /var/www/red <Directory /var/www/red Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory ErrorLog ${APACHE_LOG_DIR}/red-error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/red-access.log combined </VirtualHost Apache mod_rewrite is enabled. I've enabled both sites using a2ensite and I make sure I restart apache every time I make a change. /etc/hosts 127.0.0.1 localhost 127.0.0.1 mysite.com 127.0.0.1 red.mysite.com Any help would be appreciated. Thanks!

  Read the article

• Unix domain socket firewall

  - by lagab

  Hello, everyone. I've got a problem with my debian server. Probably there is some vulnerable script at my web-serser, which is running from www-data user. I also have samba with winbind installed, and samba is joined to windows domain. So, probably this vulnerable script allows hacker to bruteforce out domain controller through winbind unix domain socket. Actually I have lots of such lines at netstat -a output: unix 3 [ ] STREAM CONNECTED 509027 /var/run/samba/winbindd_privileged/pipe And our DC logs contain lots of recorded authentication attems from root or guest accounts. How can I restrict my apaches access to winbind? I had an idea to use some kind of firewall for IPC sockets. Is it possible?

  Read the article

• SELinux adding new allowed samba type to access httpd_sys_content_t?

  - by Josh

  allow samba_share_t httpd_sys_content_t {read execute getattr setattr write}; allow smbd_t httpd_sys_content_t {read execute getattr setattr write}; I am taking a stab in the dark with resources I've looked at, at various places that the above policies are what I want. I basically want to allow Samba to write to my web docs without giving it free access to the operating system. I read a post by a NSA rep saying the best way was defining a new type and allowing both samba and httpd access. Setting the content to public content (public_content_rw_t) does not work without making use of some unrestrictive booleans. To state this in short, how do I allow samba to access a new type?

  Read the article

• testdisk - recover partition table

  - by Evaggelos Balaskas

  I destroyed my partition table of my laptop. Testdisk reports the below Disk laptop.img - 250 GB / 232 GiB - CHS 30402 255 63 (RO) Partition Start End Size in sectors >P MS Data 435868 456606 20739 [NO NAME] P MS Data 19232600 19235479 2880 [NO NAME] D MS Data 41945087 83890143 41945057 D MS Data 57151486 168579069 111427584 D MS Data 67637246 141037565 73400320 D MS Data 151523326 193466365 41943040 D MS Data 170617328 170618223 896 D MS Data 170631168 170634047 2880 D MS Data 171338232 171344405 6174 [Boot] D MS Data 172008235 172231918 223684 [NO NAME] P MS Data 193466368 214437887 20971520 D MS Data 217321375 225321678 8000304 [root] D MS Data 224923646 308809725 83886080 [media] D MS Data 308809728 420237311 111427584 D MS Data 418910206 481824765 62914560 [vmimages] my partition table had 3 Primary Partitions. 1. WinXP Home 2. /boot 3. LVM inside LVM i had 9 or 10 LVM partitions One of them was my home (encrypted with luks) testdisk cant recover my partition table or any other partition. Partitions with [P] doesnt have any useful data. I want to use dd to extract the partitions and try to recover as many files i can. Any ideas of how i can extract eg. the [root] lvm partition from the above testdisk report ? I am afraid that my disk was also corrupted.

  Read the article

• Owner of uploads directory is `www-data` but this prevents FTP access via PHP scripts

  - by letseatfood

  To allow write access to Apache, I needed to chown www-data:www-data /var/www/mysite/uploads to my site's upload folder. This allows me to delete files from the folder via unlink() in a PHP script. Unfortunately, this prevents another PHP script, which uses FTP functions, from working. I think it is because the FTP user is mike and now that the uploads directory is owned by www-data, mike cannot access it. I added mike to the group www-data, but this does not fix the issue. Can somebody advise me on how to allow PHP FTP functions to work in addition to file deletion using PHP's unlink() function?

  Read the article

• SSH sometimes screws up connection when terminal overflows?

  - by SeveQ

  I've got a problem with SSH on a Debian Lenny based server (it's a vHost within a Xen environment, booted on a Xen kernel). I hope someone can help me with this. The SSH connection seems somehow getting screwed up frequently when the terminal overflows (new lines beyond the bottom of the terminal, usually forcing it to scroll). The connection gets lost but not regularly disconnected. It nearly always happens when I do the following: an existing SSH connection gets disconnected (regularly) I order putty to reestablish the connection login-prompt appears at the very bottom of the putty terminal window I enter my login-name, press the enter key I'm asked for the password, I enter it, press the enter key and BOOM! Nothing more happens. I have to reconnect again. So it is reproducable. I'm not totally sure if the connection crashes before or after I enter the password. Furthermore it also happens when there is much text to be displayed (for example when I compile something or do an ls -l on a directory with many entries). Using 'screen', however, helps to reduces the frequency of occurence but doesn't solve the problem completely. It's occurence is independent from which terminal software I use. I mostly use putty but it also happens with other clients. I certainly hope somebody can help me solving this problem. Thanks in advance! //edit: I've just made a Wireshark trace of the ssh connection and there is nothing, I repeat, nothing different between the working and the failing connection (at least aside from frame numbers, ports and times that obviously can't be equal). This leads me to the assumption that the error has to happen on the server's side.

  Read the article

• Upgrade to ubuntu 13.04 from 12.04 with iso image

  - by Digvijay Yadav

  I have ubuntu 12.04 installed on my system. I want to upgrade it to ubuntu 13.04. I want to do this upgrade using an iso image of ubuntu 13.04. I tried this Solution But it didn't work for me. After running these command I didn't get any alerts about updating. Also I don't understand the gksu part of the solution. Here are the steps I tried: sudo mount -t iso9660 -o loop PATH/TO/ISO /cdrom then sudo /cdrom/cdromupgrade Read more: http://linuxpoison.blogspot.tw/2011/06/how-to-upgrade-ubuntu-using-alternate.html#ixzz2SFMqlOPx I also wanted to know, If I can do this using a networked computer. By this I mean the iso file is on some other computer. Thank you.

  Read the article

• Seeing Unix file permissions under Windows

  - by Bernhard V

  Hi, is there a way to view the Unix permissions for a file under Windows?

  Read the article

• installing and running google-chrome on an old Ubuntu 7.10 legacy system

  - by 12632

  I am trying to get google-chrome to work on Ubuntu 7.10. I installed it with --force-depends and got it to install, but now when I try to run it, I get this error: /usr/bin/google-chrome: error while loading shared libraries: libnss3.so: cannot open shared object file: No such file or directory Is there a way to still get google-chrome to load even without this dependency satisfied? This is an old system that needs to keep this old 7.10 Ubuntu version and I would like to have google-chrome if possible installed, even if it means no sound or other features that are not compatible.

  Read the article

• Ubuntu most menu items dark-on-dark

  - by krzysz00

  Since to ubuntu 10.04 upgrade move of my drop-down menus have been dark-on-dark text, which becomes readable (changed background) when selected. I don't know what's causing this but it's a problem on Ambience and Radiance both. Any hints?

  Read the article

• Can I mark a folder as mountpoint-only?

  - by Collin

  I have a folder ~/nas which I usually use sshfs to mount a network drive on. Today, I didn't realize the share hadn't been mounted yet, and copied some data into it. It took me a bit to realize that I'd just copied data into my own local drive rather than the network share. Is there some way to mark in the system that this folder is supposed to be a mount point, and to not let anyone copy data into it? I tried the permissions solution here: How to only allow a program to write to a directory if it is mounted?, but if I don't have write access I also can't mount anything to it.

  Read the article

• When spliting MP4s with ffmpeg how do I include metadata?

  - by Josh

  I have a few MP4s that i want to upload to my flickr account but they have a maximum size of 500mb as mine is only about 550 i was planing to simply split them in half then upload them, but i want to make sure all the meta data is included but it does not seem to be. I have tried each of the following with no luck, (at the end of this post i have the original and the new ffprobe outputs): ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_metadata 0:0 SANY0069A.MP4 ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_meta_data SANY0069.MP4:SANY0069A.MP4 SANY0069A.MP4 with the this one I manually produced the individual meta tags that i took from this command ffmpeg -i SANY0069A.MP4 -f ffmetadata meta.txt ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -metadata major_brand="mp42" -metadata minor_version="1" -metadata compatible_brands="mp42avc1" -metadata creation_time="2012-09-29 09:05:50" -metadata comment="SANYO DIGITAL CAMERA CA9" -metadata comment-eng="SANYO DIGITAL CAMERA CA9" SANY0069A.MP4 using the output of the former command i also tried this: ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -f ffmetadata -i meta.txt SANY0069A.MP4 Output: sample output from my first command: ffmpeg -ss 00:00:00.00 -t 00:04:19.35 -i SANY0069.MP4 -acodec copy -vcodec copy -map_metadata 0:0 SANY0069A.MP4 ffmpeg version 0.8.12, Copyright (c) 2000-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 Duration: 00:08:38.71, start: 0.000000, bitrate: 9142 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9007 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 File 'SANY0069A.MP4' already exists. Overwrite ? [y/N] y Output #0, mp4, to 'SANY0069A.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 encoder : Lavf53.5.0 Stream #0.0(eng): Video: libx264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], q=2-31, 9007 kb/s, 30k tbn, 29.97 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop, [?] for help frame= 7773 fps=4644 q=-1.0 Lsize= 289607kB time=00:04:19.35 bitrate=9147.4kbits/s video:285416kB audio:4033kB global headers:0kB muxing overhead 0.054571% and finaly, when i compare the ffprobe of the original and the first split part i get the 2 following outputs: original ffprobe version 0.8.12, Copyright (c) 2007-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069.MP4': Metadata: major_brand : mp42 minor_version : 1 compatible_brands: mp42avc1 creation_time : 2012-09-29 09:05:50 comment : SANYO DIGITAL CAMERA CA9 comment-eng : SANYO DIGITAL CAMERA CA9 Duration: 00:08:38.71, start: 0.000000, bitrate: 9142 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9007 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 2012-09-29 09:05:50 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2012-09-29 09:05:50 Split ffprobe version 0.8.12, Copyright (c) 2007-2011 the FFmpeg developers built on Jun 13 2012 09:57:38 with gcc 4.6.3 20120306 (Red Hat 4.6.3-2) configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic' --enable-bzlib --enable-libcelt --enable-libdc1394 --enable-libdirac --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-x11grab --enable-avfilter --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-runtime-cpudetect libavutil 51. 9. 1 / 51. 9. 1 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 5. 0 / 53. 5. 0 libavdevice 53. 1. 1 / 53. 1. 1 libavfilter 2. 23. 0 / 2. 23. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'SANY0069A.MP4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf53.5.0 comment : SANYO DIGITAL CAMERA CA9 Duration: 00:04:19.37, start: 0.000000, bitrate: 9146 kb/s Stream #0.0(eng): Video: h264 (Constrained Baseline), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 9015 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 1970-01-01 00:00:00 I know this is incredibly long but its actually a quite simple question. I thought it would be best to provide as much detail as possible. any advice here would be great, Thanks

  Read the article

• postfix configuration

  - by kibs

  failed to start the postfix service output given was postfix: fatal: config variable inet_interfaces: host not found: all

  Read the article

• Other users on my Server?

  - by Jennifer Weinberg

  I'm buying a Server from a person (that I don't know really well) and I want to make sure that the previous owner hasn't got any access anymore. It's an Ubuntu Virtual Server and I already received the admin access (via shell). How can I find out if there are still other accounts left, who are still able to access my server (e.g. with a still existing shell account, ftp or another type of user account)? And how can I delete them if these accounts exist? Best regards, Jennifer

  Read the article

• With CentOS 6 and LXC, "ifconfig" is unable to see network interface (but busybox "ifconfig" works fine)

  - by larsks

  I've just started working with LXC under CentOS 6 (via the libvirt adapter). If I create an LXC container, I'm unable to see any network interfaces when using the native system tools: # ifconfig -a # The behavior is very odd; specifying an interface by names yields neither the expected output nor an error message. This is true even for clearly invalid interface names, like this: # ifconfig foo # The ip command exhibits the same behavior. On the other hand, if I use "ifconfig" provided by busybox, everything works as expected: # busybox ifconfig -a eth0 Link encap:Ethernet HWaddr 52:54:00:E0:12:C8 inet6 addr: fe80::5054:ff:fee0:12c8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:268 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17814 (17.3 KiB) TX bytes:552 (552.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So...what does busybox know that the native tools don't? The libvirt config for this environment is pretty standard; the network definition looks like this: <interface type='network'> <mac address='52:54:00:e0:12:c8'/> <source network='default'/> <target dev='veth0'/> </interface> The full configuration is here if you think it might help. I'm running: lxc-0.7.2-2.el6.x86_64 kernel-2.6.32-71.29.1.el6.x86_64 EDIT Weirder and weirder...it's a display issue, not a functionality issue. I can see the output of ifconfig if I pipe it into anything, so for example: # ifconfig eth0 | cat eth0 Link encap:Ethernet HWaddr 52:54:00:E0:12:C8 inet addr:192.168.10.10 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fee0:12c8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:573 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:37914 (37.0 KiB) TX bytes:552 (552.0 b) And in fact even when not piping the output, strace shows that ifconfig is in fact writing the output to file descriptor 1 (aka stdout), so it's not clear why no output is actually showing up. This could be either an LXC or a virsh issue, I guess.

  Read the article

• Why does dstat show zeroes for disk activity on my virtual private server running Ubuntu?

  - by Jonathan Berger

  I'm trying to monitor the number of disk reads and writes on my VPS (Rackspace in this case) running Ubuntu 9.04. I realize there are many tools to do this, but when using dstat 0.7 I tried the following command: dstat -d The output is just two columns of zeroes even when I upload a large file via scp that should be causing a large number of disk writes. Why is this, and how do I get dstat to correctly display the number of disk reads and writes?

  Read the article

• Is segfault signal always sent to application

  - by noonex

  My application usually crashes and prints stack to log if received segfault signal. But in some environment the 'dmesg' shows segfault messages related to my application, but application uptime is much older. Can segfault be suppressed and application doesn't receive signal? Or what errors from dmesg can mean ?

  Read the article

• GNU Screen: Combining split-regions and full-screen sessions

  - by scrrr

  Let's say I have three sessions: 0, 1 and 2 I'm on session 0 and I press CTRL-A S to split the screen. Then I select session 1 for the bottom split region, while 0 is in the upper. Can I switch to session 2 and have it display in full-screen while 0 and 1 remain split? If I CTRL-A n to other sessions in a split screen it only changes the split-region. I want some sessions to be full-screen though. Is that possible?

  Read the article

• vlans on openvz, centos 6

  - by arheops

  i have centos 6 with openvz installed on it, switch with vlan support. I need following setup: 1) eth0 on openvz have be tagged multiple vlans. 2) each virtualhost have to be in single vlan. yes,i already read wiki on openvz, but it is just not work. I have on main server interface eth0.108 and able ping address on that interface(using nootbook on untagged port vlan 108), but i not able ping address inside container. Main node: [root@box1 conf]# ifconfig eth0 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:506 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68939 (67.3 KiB) TX bytes:1780 (1.7 KiB) Interrupt:16 Memory:c0000000-c0012800 eth0.108 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet addr:10.11.108.3 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:238 errors:0 dropped:0 overruns:0 frame:0 TX packets:19 errors:0 dropped:12 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:25890 (25.2 KiB) TX bytes:926 (926.0 b) eth1 Link encap:Ethernet HWaddr D0:67:E5:F4:11:61 inet addr:192.168.23.233 Bcast:192.168.23.255 Mask:255.255.255.0 inet6 addr: fe80::d267:e5ff:fef4:1161/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1967 errors:0 dropped:0 overruns:0 frame:0 TX packets:356 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:365298 (356.7 KiB) TX bytes:115007 (112.3 KiB) Interrupt:17 Memory:c2000000-c2012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:784 (784.0 b) TX bytes:784 (784.0 b) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet6 addr: fe80::1/128 Scope:Link UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) veth108.0 Link encap:Ethernet HWaddr 00:18:51:DA:94:D5 inet6 addr: fe80::218:51ff:feda:94d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:639 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17996 (17.5 KiB) TX bytes:308 (308.0 b) virtual node [root@pbx108 /]# ifconfig eth0.108 Link encap:Ethernet HWaddr 00:18:51:CA:B5:C5 inet addr:10.11.108.1 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::218:51ff:feca:b5c5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:685 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:308 (308.0 b) TX bytes:19284 (18.8 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:683 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76288 (74.5 KiB) TX bytes:76288 (74.5 KiB) /etc/vz/conf/108.conf # RAM PHYSPAGES="0:4000M" # Swap SWAPPAGES="0:512M" # Disk quota parameters (in form of softlimit:hardlimit) DISKSPACE="200G:200G" DISKINODES="20000000:22000000" QUOTATIME="0" # CPU fair scheduler parameter CPUUNITS="4000" VE_ROOT="/vz/root/$VEID" VE_PRIVATE="/vz/private/$VEID" OSTEMPLATE="centos-6-x86_64" ORIGIN_SAMPLE="vswap-256m" NETIF="ifname=eth0.108,mac=00:18:51:CA:B5:C5,host_ifname=veth108.0,host_mac=00:18:51:DA:94:D5" NAMESERVER="8.8.8.8" HOSTNAME="pbx108.localhost" IP_ADDRESS=""

  Read the article

• racoon-tool doesn't generate full racoon.conf file in /var/lib/racoon/racoon.conf

  - by robthewolf

  I am using ipsec-tools/racoon to create my VPN. I am using racoon-tool to configure racoon.conf but when I run racoon-tool reload it only generates the first section - Global items. When I run racoon-tool I get: # racoon-tool reload Loading SAD and SPD... SAD and SPD loaded. Configuring racoon...done. This is the entire file /var/lib/racoon/racoon.conf # # Racoon configuration for Samuel # Generated on Wed Jan 5 21:31:49 2011 by racoon-tool # # # Global items # path pre_shared_key "/etc/racoon/psk.txt"; path certificate "/etc/racoon/certs"; log debug; I cannot find anywhere a solution as to why this is happening. Please help

  Read the article

• Hugepages not utilized by MySQL 5.0, CentOS 5

  - by TechZilla

  I've set up Hugepages, but i'm not seeing any of them reserved. Have I missed a step, or for some particular reason, is MySQL is unable to utilize the Hugepages? I have not created a mount of hugetlbfs, although from what I read, MySQL would not call pages in such a manner. If I'm wrong, please let me know, as that would be a trivial solution. Almost all my MySQL tables are using InnoDB. NOTE: I created a hugetlbfs, no change as expected. Is it possible that rebooting would rectify this situation? I would not want to go through the procedure, as this is high availability, but would do so if necessary. This is the configurations, which I believe are relevant. /etc/sysctl.conf ... ## Huge Pages vm.nr_hugepages = 4096 vm.hugetlb_shm_group = 27 ## SHM kernel.shmmax = 34359738368 kernel.shmall = 8589934592 ... /etc/security/limits.conf ... mysql soft nofile 12888 mysql hard nofile 51552 @mysql soft memlock unlimited @mysql hard memlock unlimited /etc/my.cnf [mysqld] large-pages ... grep Huge /proc/meminfo HugePages_Total: 4096 HugePages_Free: 4096 HugePages_Rsvd: 0 Hugepagesize: 2048 kB id mysql uid=27(mysql) gid=27(mysql) groups=27(mysql) context=root:system_r:unconfined_t:SystemLow-SystemHigh tail -6 /var/log/mysqld.log InnoDB: HugeTLB: Warning: Failed to allocate 1342193664 bytes. errno 12 InnoDB HugeTLB: Warning: Using conventional memory pool 120808 15:49:25 InnoDB: Started; log sequence number 0 1729804158 120808 15:49:25 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution I would really appreciate any help, I'm completely out of ideas. If I missed any more relevant configs, or diagnostics, please comment and I'll add it to the question.

  Read the article

• Looking for a host based network monitor solution

  - by Ole Martin Handeland

  Hi all! Problem So, my hosting company has a network usage graph for my dedicated server. It seems that one day earlier this month, my network usage suddenly spiked with several hundred megabytes transferred (usually it's in the tens, not hundreds). It was probably me, but i just can't be sure who or what it was. Question So my question is; does anyone know of any host based solution for monitoring network usage that would tell me the client's IP-address, the port/service he/she used? What I don't want I'm just guessing that someone will suggest i use nagios, munin, zabbix, cacti, mrtg - I've also looked at those, but a graph over network usage will not give me the answers I'm looking for. :-) Almost there I've already looked at a lot of monitoring solutions, and I've tried [ntop][http://www.ntop.org/], [darkstat][http://unix4lyfe.org/darkstat/] and others. Darkstat just didn't give me the answers. Although it listed a lot of statistics, and i could list the clients - it doesn't show me the network usage for a particular period. Ntop is by far the best I've seen so far - but i think it mostly shows current network usage, not the historical part. I could run apt-get upgrade and download a whole bunch of software, but not see it in the log afterwards.

  Read the article

• Is there a way to HIDE a file/dir from a specific user/group?

  - by Iraklis

  I'm setting up ACL permissions in CENTOS. I'm getting close to the structure that I have in mind however one piece is missing for completing the puzzle. Is there any way to HIDE a file/directory from a specific user/group? I'm not talking about not being able to read, change dir to it. I want to completely hide it from the specific user/group (not to show up on ls -la).

  Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >