Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 370/985 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

  • Unattended Kickstart Install

    - by Eric
    I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

    Read the article

  • How can I make monodevelop render text in KDE?

    - by Spikolynn
    Monodevelop from git in KDE 4.10.2 does not render text in code edit tabs I tried with xfce and text is rendered ok there. I tried disabling composition with alt shift f12 and restarting x server but it was no better. I also tried disabling font softening in monodevelop options and disabling plugins. I also tried temporarily deleting my KDE profile. This is dual screen setup on Nvidia with nouveau. OS is slackware64-current.

    Read the article

  • Amazon EC2 tools for Debian?

    - by Jonik
    What is the recommended way of getting command-line Amazon EC2 tools on Debian? So, basically the same as this question, but for EC2 instead of S3. Ubuntu has ec2-ami-tools and ec2-api-tools, but I couldn't find equivalent packages for Debian. A blog post titled "Install EC2 AMI & API tools in Debian" talks about installing Amazon's packages outside package management, but that seems a little clumsy.

    Read the article

  • Are my Linux symbolic links acting correctly?

    - by Andy Castles
    Hi all I've been using Linux on and off for the last 15 years and today I came across something in bash that surprised me. Setup the following directory structure: $ cd /tmp $ mkdir /tmp/symlinktest $ mkdir /tmp/symlinktest/dir $ mkdir /tmp/symlinktarget Now create two sym links in symlinktest pointing to symlinktarget: $ cd /tmp/symlinktest $ ln -s ../symlinktarget Asym $ ln -s ../symlinktarget Bsym Now, in bash, the following tab completion does strange things. Type the following: $ cd dir $ cd ../A[TAB] Pressing the tab key above completes the line to: $ cd ../Asym/ as I expected. Now press enter to change into Asym and type: $ cd ../B[TAB] This time pressing the tab key completes the link to: $ cd ../Bsym[space] Note that there is now a space after the Bsym and there is no trailing slash. My question is, why when changing from the physical directory "dir" to Asym it recognises that Asym is a link to a directory, but when changing from one sym link to another, it doesn't recognise that it's a link to a directory? In addition, if I try to create a new file within Asym, I get an error message: $ cd /tmp/symlinktest/Asym $ cat hello > ../Bsym/file.txt -bash: ../Bsym/file.txt: No such file or directory I always thought that symlinks were mostly transparent except to programs that need to manipulate them. Is this normal behaviour? Many thanks, Andy

    Read the article

  • Shorewall: temporarily drop incoming traffic except port 22?

    - by Magnetic_dud
    When I work on configuration files, especially of the mail server, I would like to temporarily drop all the incoming traffic except the port 22. So, I don't risk to lose incoming mails if I need to move the mail server to another server, or something like that. Using shorewall, how I could do that? I was thinking to create a rules file to divert all the traffic to a non-existant internal ip and switch it with the normal file when needed.

    Read the article

  • HALEVT troubleshooting: VFAT usb storage device gets mounted with root:root user:group

    - by Nova deViator
    Hi, i'm banging my head for number of days around this problem. using Halevt for automounting, everything mostly works, but the only thing is that Halevt mounts external USB storage devices as root. So, as user i cannot write to files on them. Halevt gets run as halevt user on boot through /etc/init.d script. This is Ubuntu Lucid with Awesome WM. No GDM. Running halevt as user seem to not work (halevt runs but doesn't respond on Insert) I know HAL is deprecated and removed and i should probably write my own UDEV rules, but until then it seems there must a be simple hack that enables mounting VFAT/NTFS devices with specific uid/gid. this question/answer helps a lot, but not specifically to the above.

    Read the article

  • IPv6 Routing / Subnetting

    - by nappo
    Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

    Read the article

  • How to grant read/write to specific user in any existent or future subdirectory of a given directory? [migrated]

    - by Samuel Rossille
    I'm a complete newbie in system administration and I'm doing this as a hobby. I host my own git repository on a VPS. Let's say my user is john. I'm using the ssh protocol to access my git repository, so my url is something like ssh://[email protected]/path/to/git/myrepo/. Root is the owner of everything that's under /path/to/git I'm attempting to give read/write access to john to everything which is under /path/to/git/myrepo I've tried both chmod and setfacl to control access, but both fail the same way: they apply rights recursively (with the right options) to all the current existing subdirectories of /path/to/git/myrepo, but as soon as a new directory is created, my user can not write in the new directory. I know that there are hooks in git that would allow me to reapply the rights after each commit, but I'm starting to think that i'm going the wrong way because this seems too complicated for a very basic purpose. Q: How should I setup my right to give rw access to john to anything under /path/to/git/myrepo and make it resilient to tree structure change ? Q2: If I should take a step back change the general approach, please tell me.

    Read the article

  • Why does ganglia think my host is down?

    - by NZKoz
    I have ganglia set up to monitor our staging server, it's working great but I'm confused by the definition of 'down' to ganglia. There's a single node, running gmetad, gmond and the web frontend, but some small percentage of the time the web frontend shows some confusing output. Despite the fact that it's a single server in the cluster, and that server is the one serving the web interface, the dashboard output insists that the host is down. Then below that it has a graph which shows 50% down, 50% up. You can see an example of this here: http://i.imgur.com/MCWaS.jpg There's obviously something confusing ganglia somewhere, but I'm not sure where to start looking. Unfortunately googling for any combination of 'ganglia' 'down' 'metric name' seems return nothing but other people's ganglia installations displaying the same nonsense. Any tips on where to start looking would be greatly appreciated

    Read the article

  • Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

    Read the article

  • Triple monitor setting in Linux with USB-HDMI adapter

    - by Oscar Carballal
    I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • DNS propagation delay or bad configuration?

    - by Javier Martinez
    I have been waiting the DNS propagation for almost 24 hours. I'am no impatient, but I want to know if I configured my zone good or I have any error in it. I think that is good, because if I use my server dns like my DNS secondary I can resolve and lookup host well. ; ; BIND data file for mydomain.net ; $TTL 86400 @ IN SOA mydomain.net. mydomain.net. ( 20120629 ; Serial 10800 ; Refresh 3 hours 3600 ; Retry 1 hour 604800 ; Expire 1 week 86400 ) ; Negative Cache TTL ; @ IN NS ns1 @ IN NS ns2 IN MX 10 mail ns1 IN A 5.39.X.Y ns2 IN A 5.39.X.Z There is not any errors in /var/syslog about bind daemon. Is everything correct? Do I only need to wait up to 48 hours for the right DNS propagation? My nslookup from a remote machine with the nameserver of the bind host: $ nslookup mydomain.net Server: bind-host-ip Address: bind-host-ip#53 Name: mydomain.net Address: domain-ip

    Read the article

  • Slight delay when switching modes in vim using tmux or screen

    - by Ton van den Heuvel
    Switching to and from insert mode in Vim is no longer instantaneous since I use tmux. After pressing Esc in insert mode, it takes a noticeable amount of time to actually get out of insert mode. After pressing Esc and any other key afterwards the switch is immediate, and the command for the key pressed after Esc is executed. Any idea what might cause this? The Vim configuration is not the problem as the delay does not occur when I run Vim outside tmux, so this is probably related to tmux somehow. I use gnome-terminal btw. Also worth noting, it seems I can not define key bindings in tmux for Esc, my plan was to bind Esc to: bind Escape send-keys ^[ Alas, it seems binding anything to Esc for tmux does not work. The same problem occurs in screen as well.

    Read the article

  • Ubuntu won't boot from USB memory stick

    - by mackenir
    I used the instructions on this webpage to create a bootable USB drive for running Ubuntu 9.10. Unfortunately it doesn't work on my EeePC. Even with 'Removable Dev.' selected in the BIOS as the first boot device, the PC just boots into Windows 7. How do I troubleshoot this problem? The drive is readable and looks like this: Directory of E:\ 28/10/2009 21:14 <DIR> .disk 28/10/2009 21:14 222 README.diskdefines 28/10/2009 21:14 143 autorun.inf 28/10/2009 21:14 <DIR> casper 28/10/2009 21:14 <DIR> dists 28/10/2009 21:14 <DIR> install 28/10/2009 21:14 <DIR> syslinux 28/10/2009 21:14 4,098 md5sum.txt 28/10/2009 21:14 <DIR> pics 28/10/2009 21:14 <DIR> pool 28/10/2009 21:14 <DIR> preseed 28/10/2009 21:14 0 ubuntu 26/10/2009 16:16 1,468,640 wubi.exe 25/02/2010 00:28 2,147,483,648 casper-rw 8 Dir(s) 5,290,307,584 bytes free

    Read the article

  • What parameters to mdadm, to re-create md device with payload starting at 0x22000 position on backing storage?

    - by Adam Ryczkowski
    I try to recover from mdadm raid disaster, which happened when moving from ubuntu server 10.04 to 12.04. I know the correct order of devices from dmesg log, but given this information, I still cannot access the data. The superblocks look messy; the mdadm --examine for each disk is on this question on askubuntu By inspecting the raw contents of backing storage, I found the beginning of my data (the LUKS container in my case) at position 0x22000 relative to the beginning of the first partition in the raid. Question: What is the combination of options issued to "mdadm --create" to re-create mdadm that starts with the given offset? Bitmap size? PS. The relevant information from syslog when the system was healthy are pasted here.

    Read the article

  • Installing Apache to CentOs 5.7 (problems with repo)

    - by C.S.Putra
    I'm installing Apache on CentOS 5.7, I followed instructions here : http://www.if-not-true-then-false.com/2010/install-apache-php-on-fedora-centos-red-hat-rhel/ I've installed this also : Remi Dependency on CentOS 5 and Red Hat (RHEL) 5 ## rpm -Uvh http://download.fedora.redhat.com/pub/epel/5/i386/epel-release-5-4.noarch.rpm When I install this, there's warning: /var/tmp/rpm-xfer.Bqu2xo: Header V3 DSA signature: NOKEY, key ID 217521f6 But it says that the package is alread installed. Then I move on to 3rd steps: yum --enablerepo=remi install httpd php php-common But it says: error getting repository data for remi, repository not found. Why is it like that?

    Read the article

  • what is ranlib?

    - by Ying
    I have been using a MacOSX system for a while, but just only recently started poking into the guts. I found a guide telling me to run 'sudo ranlib /usr/local/lib/libjpeg.a'(installing libjpeg). I have read the ranlib manual, and tried looking online on it. I simply don't understand. What resources do I need to look up to learn more, or can someone give a concise explanation on its use? Thanks in advance!

    Read the article

  • How to mount remote samba share from local host with multiple groups?

    - by Dragos
    I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this: mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000 $ cat .credentials username=user password=password I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has? Is there a way to: Mount the remote samba with multiple groups on the local system? Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs. Other solutions would be: nautilus sftp:// which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.

    Read the article

  • Trying to install mod_proxy in Apache-Httpd-2.2.15

    - by Dspace
    Hello, I have spent the afternoon trying to install the mod_proxy module into apache. I have tried ./configure --prefix=/opt/apache2 --enable-proxy --enable-proxy-http ./configure --prefix=/opt/apache2 --enable-module=proxy After it finishes installing, navigating to /opt/apache2/modules only shows one file: httpd.exp. It seems that the module is not being installed. Any help is appreciated. Thanks.

    Read the article

  • Permissions nightmare - tried all I know

    - by Ben
    Working on a new client's dev site, which is a wordpress install on a Plesk box. I have SSH root access, and FTP access through a separate account. What I've done so far Initially I couldn't make any changes to any files at all. The permissions on all the template files looked a little screwy (644), so I figured change them to allow group, and add myself to the group: CHMOD Recursive on the theme folder to set everything to 664 Quickly realised I'd broken it, set the folders to 755, kept files as 664 Ownership on all files is a mixture of root:root and 500:500 (there is no user nor group with the ID of 500 on the server). Added myself to the group 'root' so I could modify the files too The Problem This worked OK, in terms of being able to edit the existing files, so I began working. However, I can't upload to the directory, even having run CHOWN -R root:root templatefolder/ and being in the root group. I feel like I must be missing something obvious, and it's doing my head in. Questions: Files in the install owned by 500 with group 500 - I've looked in /etc/group and /etc/passwd and there is no user nor group with this ID. Is that left over from another developer's setup or the previous server (they moved recently)? Is being in the 'root' group enough, or do I need to own the theme folder as 'myftpuser' in order to upload and create new files? Like I say, I have edit access, so I got myself this far. I'm now questioning what to do next!

    Read the article

  • Enabling vim file type plugin

    - by person
    In my .vimrc file I have this line.. filetype plugin indent on and then in ~/.vim/ftplugin/py.vimrc (I've also tried saving it as a .vim file) I've copied and pasted a vimrc file for python standards and have enabled all of the suggested settings in it (uncommented them). When I create and open a test.py file and do something like a tab, it goes 8 spaces instead of 4. Not sure what's going wrong.

    Read the article

  • Basic OpenVPN setup not working

    - by WalterJ89
    I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

    Read the article

  • Hanging of host network connections when starting KVM guest on bridge

    - by Chris Phillips
    Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

    Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >