Search Results

Search found 16838 results on 674 pages for 'writing patterns dita cms'.

Page 367/674 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• How can I improve performance over SMB/CIFS for an application that has poor write speeds?

  - by Jeremy

  I have a third party application that reads several large files and generates a third large file. Its performance is quite good when the generated file is stored on "local storage", i.e. either a direct attached or iSCSI-based disk. The source files that are read can be stored remotely on our NAS and accessed via SMB with little effect on performance. However, if we attempt to write the target file to any kind of SMB/CIFS share (Samba or Windows Server) the performance drops almost ten-fold. This is unacceptably slow in our case. Writing files to network shares is not otherwise slow. I can copy large files to SMB shares and get great performance - near what I would expect is possible given the disks and network in question. I have a theory that this application's problem with SMB shares has something to do with a lack of write caching over the share and perhaps lots of network roundtrips. Is this possible and is there anything that can be done about it?

  Read the article

• Is it dangerous to use both Sky Drive and Dropbox?

  - by Matthew

  I'd like to experiment with Sky Drive, but keep using my Dropbox account unless I decide to switch. This answer gives instructions for how to set up both at the same time, but I'm a little worried about data integrity. Is there any danger involved here? Will Sky Drive and Dropbox fight each other? Note that I am using Sky Drive/Dropbox on multiple computers, so they will be writing data as well as reading it. Is this safe? Edit: I can use them with different folders if necessary, but I'm particularly curious what would happen if they sync from the same folder.

  Read the article

• Speed up file access on home network

  - by kurasa

  I have 2 PCs (Windows 7 Ultimate) and a Mac running Windows 7 using vmware fusion on my home network tied together using WRN1000 NETGEAR Router On one of the PC's I have a set of file (MYOB .myo). These use a data source to access the data in the files. Operations (reading,writing) to the .myo on the PC which hosts the files is fine but the other 2 it is painfully slow/unreliable and I am wondering what I can do to speed this up. Some ideas I have are 1. Turn off the Windows firewall on all the windows installations on the home network 2. Buy another router. Specifically a router which I can connect a USB flash drive on the back where I can put the .myo files and all the PC can access the files from the USB flash drive on the router (does this speed things up?) Any advice greatly appreciated on how I can speed up this access to data

  Read the article

• How can I flush my ssh keys on power management activity?

  - by Sam Halicke

  Hi all, Using ssh-agent and private keys per the usual. Everything's working as normal. My question regards best practices on flushing keys from ssh-add on activity like sleep, suspend, hibernate, etc. I thought about writing a simple wrapper around those commands, but then wondered if are they even called? Or does the kernel initiate this activity directly? Are the PM utilities strictly userland? I would like this additional layer of security beyond locking my screen, etc. and was wondering if anyone else had solved this elegantly or has best practices to recommend. Thanks.

  Read the article

• Jetty8 virtual hosts

  - by Martin

  I have a server JAR that is deployed once per customer, it is the API server for their software package. To that end, the port for each API instance must be the same, so that anything programmed against it can always find it. Each instance is deployed on a different domain name The problem I'm having is that, even when using a SelectChannelConnector and setting the host property, I can't get two instances to run simultaneously, I get a BindException with "Address already in use". I suppose my question is: can Jetty do this, or do I need to do some external re-writing, or is there a better way I can go about achieving the same ends? Thanks.

  Read the article

• Problem booting hard drive after installing Centos from USB Stick

  - by Rick

  Here is the situation, I created a Centos Live 5.4 Bootable USB drive. I used this to install Centos on a HP Netbook. BTW: the Netbook doesn't have a CDRom so I used the usb key. When the system goes to write the Grub boot loader to disk, it wants to write the boot loader to the usb drive (/dev/sda), not the hard disk (/dev/hda). I do have the option of writing the boot loader to /dev/hda, (not to the mbr!) but when I reboot I get an load error and the Grub prompt. How can I get Centos booting from the hard disk instead of using the USB key. Thanks.

  Read the article

• How do i enable deflate on apache2? debian

  - by acidzombie24

  I looked at the other answers and those solutions did not help. I am completely confused how to do this. I know almost nothing about apache nor how to use it and nearly all the article say write this but doesnt tell me where. So far i have done this # a2enmod deflate Module deflate already enabled Then i tried writing this in httpd.conf AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css Then i wrote a longer version which involved deflate.c. After those didnt work i deleted them all and wrote the AddOutputFilterByType line in apache2/sites-enabled/000-default inside of I used this to test http://www.whatsmyip.org/http_compression/ everytime it says no compression. I used another site but i could never compress. Also i restart the server everytime i save a file so what could be the problem and how do i enable this properly?

  Read the article

• Generic tool to configure startup applications on Unix

  - by srid

  Is there an automated deployment tool that manages startup applications on a variety of machines, especially the Unices? Or is the only hope to study the nuts and bolts of each Unix (osx, linux, solaris, hpux, aix) on how to configure applications to launch on system startup? I want to run them as a specific user, instead of root. At the moment, I run them all within a screen session .. which is a hassle, as this requires manual intervention every time the machine is rebooted for some reason. Ideally, I am looking for a tool that would read, say, ~/.startup-programs which file contains, on each line, the command line to launch the needed daemons. And this tool should work on OSX, Linux, Solaris, HPUX and AIX ... writing the appropriate startup scripts for each platform.

  Read the article

• Executing EXE with wildcard from psexec

  - by Danny

  I'm writing a few scripts that I am using to integrate with bamboo for some continuous integration improvements and I've run into a bit of a snag. I'm currently trying to run a psexec command that installs the latest build on the remote machine but I dont necessary know the revision number. For example, the remote exe file could be Installer-3.1.xxxxx.exe where the xxxxx changes. I tried running the command with Installer-3.1.*.exe but it takes it as literal in Windows. I'm not overly familiar with Windows command prompt and am more used to Linux at this moment.

  Read the article

• Best way to script checking whether a machine is on the corporate network

  - by Ben

  I am writing a Powershell script to determine if a machine is on the corporate network. The machine may or may not be on the domain, so I want to check at "IP" level. Have written something to check by pinging a couple of servers on a couple of different subnets (to get around the risk of someone being on another (external) subnet with a host on the same IP.) Works, but it's a bit slow, and not especially "future-proof" - e.g. in 2 years time when I decomission the server it'll break. Is there a way I can use the dns suffix being given by the local dhcp server? Just direct me what I need to check - I can figure out the script. Ta, Ben

  Read the article

• dhclient append settings from multiple DHCP servers

  - by Brian

  I have a server with two interfaces connected to two separate networks, using DHCP for both. When dhclient is writing /etc/resolv.conf, I would like it to append settings that aren't already there. For instance, if I receive from one DHCP server: nameserver 10.0.0.1 search one.mydomain.com and from another: nameserver 10.1.1.254 search two.mydomain.com Then resolv.conf should look like this: search one.mydomain.com two.mydomain.com nameserver 10.0.0.1 nameserver 10.1.1.254 At the moment, it seems the last dhclient overwrites whatever was there. I know I can preconfigure settings in dhclient.conf using supercede or append, but then I have to hard-code the values. I've scoured the man page for dhclient, but it seems like dhclient prefers to work alone (i.e. not in conjunction with any other dhclients)...or am I missing something?

  Read the article

• Update saved password for basic authentication using a script

  - by Kalamane

  I have a website that uses basic authentication as described on this webpage. Each of the computers I manage have the password saved in their browser. There is only one username and password for this. After someone logs in to the site this way, they are presented with their individual username and password prompt as part of the web page. The purpose of the initial username/password is to discourage non-technical employees that aren't supposed to be using the page from even viewing it. So far, when we've had to change this password, I've manually gone to each computer and updated the saved password. I'm writing a startup script to configure other aspects of these systems so that I can maintain them easier. I'd like to be able to update the saved password via this script. The operating system running on these machines is Windows XP SP3 and the browsers they're using to access this site are IE8 and IE9. How can I update the saved basic authentication information for a website via a script?

  Read the article

• International Dvorak keyboard doesn't trigger hot-keys

  - by akurtser

  I'm using the Engilsh-Dvorak keyboard-layout; My second keyboard language is Hebrew, which has nothing to do with Dvorak but the hot keys (e.g if I'm writing a document in Hebrew and want to make some bold text using Ctrl+b). The default Hebrew keyboard that comes with Windows (7 and below) has a shift mode which matches each Hebrew character with its matching English QWERTY character ). Obviously I'd want to use the Dvorak corresponding key rather than the QWERTY one, so I created a Hebrew-Dvorak keyboard with a software called Keyboard Layout Manager (KLM) which creates new keyboard layouts DLLs. It works just fine for the shift key, however, Ctrl-key triggered hot-keys (e.g Ctrl+l in FF) are being matched to the corresponding QWERTY key. I've examined the properly working English-Dvorak layout using KLM and in it's "Ctrl+ pressed" view, there isn't any character that's matched to any key but still I tried to encode the Hebrew Ctrl+ pressed keys to work with their matching Dvorak keys, yet it had no effect.

  Read the article

• update terminal title from standard output of long running command?

  - by Sam Hasler

  I'd like to change the title of a terminal window during a long running command (for example: git svn fetch) with values greped from the output, whilst still writing to standard output. Is this possible using named pipes or tee and xargs? I'm thinking something like git svn fetch | sed "s/^\(r\d*\).*$/ \"\\\033]0;\"\1\"\\\007\"/" | xargs -l1 echo -ne based on: http://tldp.org/HOWTO/Xterm-Title-3.html Update: getting this to work would be enough: (echo "r9" ; echo "r10") | sed "s/^\(r\d*\).*$/ \"\\\033]0;\"\1\"\\\007\"/" | xargs -l1 echo -ne Update 2: This almost does what I want. I see r10, but not r9: (echo "r9" ; sleep 1 ; echo "r10") | sed "s/^\(r[0-9]*\)\.*$/\\\033]0;\1\\\007/" | xargs -0 echo -ne

  Read the article

• Kernel appears to have no modules

  - by George Reith

  Useful info: OS: CentOS 5.8 final Kernel: 2.6.32-042stab056.8 My kernel came prebuilt with the server, I don't know anything about kernels and not a lot about linux however as far as I do know I should have some modules loaded by the kernel. I came across this problem because I am unable to run iscsi as it is expecting certain modules to be loaded. lsmod returns nothing. depmod -a returns: WARNING: Couldn't open directory /lib/modules/2.6.32-042stab056.8: No such file or directory FATAL: Could not open /lib/modules/2.6.32-042stab056.8/modules.dep.temp for writing: No such file or directory I have rebooted and nothing has changed. Does anyone know why this is happening?

  Read the article

• FTP error when doing file transfer

  - by Ernie

  I'm running vsftpd version 3.0.2 over FTPeS, and I'm having a bit of trouble with file transfers. It seems to work fine when I'm on the LAN, but not from an external IP address. I have the control port and data ports open on my server's software firewall and my router's firewall. When I'm using the service from an external IP address, it seems like sometimes a file transfer will complete, but it times out and I always get the client error: "426 Failure writing network stream". I've tried several clients. I'm thinking there is some sort of data sabotage either at the router or some server policy; maybe because I'm using passive ftp? Suggestions?

  Read the article

• Weblogic Threads Usage

  - by Hila

  I have an application deployed on WebLogic 10.3, which exhibits a strange behavior. I am running a constant (not too high) load on my application (20 concurrent users, running a light activity). The response time is reasonable (well below 100ms after the application stabilizes) Memory consumption seems fine (My application creates a lot of short-living objects, but they are garbaged collected so the overall memory consumption stays under 500 mb). Threads stats seem healthy as well: And yet, after I leave my test running for a while, more and more execute threads ("[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'") are created, until eventually the application crashes: This test hasn't been running for a long time (All the new threads that you don't see in the first screenshot were created while I was writing this question), and I've seen much more threads being created. Any idea why these threads are being created?

  Read the article

• Wireless bridge between two prolink adsl modem/router

  - by MyName

  Allright, so i've got 2 prolink hurricane h5004n. Its a broadband adsl modem and router. My Pc is connected to the first one via ethernet. What i want to do is a wireless bridge to make the 2 routers "talk". I've tried hooking up the dsl cable (as they are modems) in both to try but when one disconnects as the other connects. I don't really know about the configurations to be done of all the DCHP or RIP and NAT forwarding stuffs. (i'm just writing what i saw) In short i want the second router to act as a wifi repeater but i don't see any repeater option and i also do not want to connect them via ethernet. So is it possible to do something? Apart from buying another repeater i don't want to spend anymore i'm done :S

  Read the article

• Is it really necessary to call /bin/sync twice before an unmanaged power-off?

  - by Jeremy Friesner

  Hi all, My company sells an "embedded device" which is implemented as a headless Linux box with ext4 on an internal SSD. Some of our users have a habit of doing a "save current settings" on this box, and then cutting power to the unit as soon as the unit reports that the save completed (ie two seconds later). This was causing occasional corruption of the saved files, as the data wouldn't always get flushed to the SSD before the power went out. So I tweaked my software to run /bin/sync immediately after writing the file (after closing the file handle but before notifying the user that the save completed). This appears to fix the issue, but my coworker says that one call to /bin/sync isn't sufficient, and that to be really safe I ought to run /bin/sync twice in a row. That sounds like paranoia to me... Perhaps a habit from earlier versions of Linux or unix whose sync utility didn't work reliably. Does his advice have merit, or should one call to /bin/sync suffice?

  Read the article

• How should I implement an email circuit test?

  - by lukecyca

  I want a high-level test that ensures that both incoming and outgoing email services are operating normally. I've achieved this by writing a python script which does this: Send a message with a unique hash through my mail server to [email protected] The gmail account is configured to auto-reply back to the same address and then delete the message. My script polls IMAP until it finds an email with the correct hash sitting in its inbox, or times out. It reports the elapsed time to my monitoring software (Zabbix) My question: Is gmail the best third-party to use? Should I add a couple others as well such as hotmail and yahoo? Is there anyone more official that will auto-reply to these sorts of "mail pings"? Any other recommendations for this type of test?

  Read the article

• How to disable a McAfee service?

  - by AngryHacker

  I am trying to disable a McAfee Real-Time Protection service, but if I go into Services/Properties, then try to set it to Manual or Disable - it says that unable to open service McShield for writing on Local Computer. Error 5. Access is denied. I've tried logging in as an Admin, to no avail. I've tried resetting permissions in the registry to the key where the McAfee service is described...nothing helped. Logging in with Safe Mode did not help either. How can I disable this service? Is there a way to disable a service before even getting into Windows? P.S. Uninstalling McAfee is not an option.

  Read the article

• Rsync over NFS with QoS: How to view real transfer speed?

  - by Ian Mackinnon

  We have a bandwidth limit between a Linux server and a NAS, created using 'tc' with an IP filter. When writing to an NFS mount of the NAS, rsync claims a very high transfer speed for each file and then waits a long time before acknowledging that everything has finished. The total time taken is consistent with the QoS limit and the time taken by the same transfer over FTP. Why does the write to the NFS mount report higher transfer speeds than are actually happening over the network? How can I monitor the actual bandwidth of the transfer?

  Read the article

• Backing up data in an encrypted way

  - by Eli Bendersky

  I have the following use case: There's some data from my PC I want to periodically back-up online I own some hosting, so I want to use that for the backups, don't want to pay to another backup service I want to encrypt my data locally prior to moving it to the server I have no problem writing scripts to automate the process (say, periodically generate the backup and upload by FTP to my server), but my main question is about step 3 - the encryption: which way is recommended to encrypt my files (say, collected into a .ZIP) prior to uploading to the server? P.S. TrueCrypt seems popular but it's not quite what I'm looking for, since I don't want the files to be constantly encrypted here on my PC.

  Read the article

• What is the simplest way to confirm or to disprove that Virtual Box virtual machines support GRE protocol

  - by mbaitoff

  It is stated in VirtualBox manual (chapter 6) that VM network interfaces in "NAT" mode do not support GRE protocol. I'm currently trying to setup a pair of VMs as pptp server and client which would communicate via VM's network interfaces in "INTERNAL NETWORK" mode. I set up modern Linux OSes with pptp software on both machines and made some basic pptp configuration. However, I fail to connect the client to the server - server reports a failure when writing to GRE socket. I now need a quick proof of principal ability to use the GRE protocol between VirtualBox VMs over a network in "INTERNAL" mode, such as a several-line .c program that would try to open/send/receive/close a GRE protocol connection, or like a specific lightweight tool to diagnose the GRE availability. Any suggestions?

  Read the article

• Installing software at large organisation

  - by CJ7

  I have to give an MSI to a large organisation for it to install (presumably via GPO) on to some of their workstations that are running XP. I already know that my application is not allowed to write to the application folder. I realise it should be writing to the AppData folder. The organisation has allocated a folder on a server for the database files and other configuration files. This folder is referenced by UNC naming and not by mapped drives. My question is: based on normal practices, is my app likely to have the rights to create a sub-folder on this server? Is my app likely to have the rights to create files on this server?

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >