Search Results

Search found 18488 results on 740 pages for 'android networking'.

Page 370/740 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

  • My internet drops and will only reconnect if I troubleshoot it or restart my computer.

    - by Paul
    My internet loses its connection and at the same time, and my speaker seems broken if that happens and my mouse will not be smooth as it was before it happens. It already happened before and I didnt mind it. But now, it's happening literally all the time. After startup, my connection seems okay but after some few minutes, even without me doing something, my laptop will just lose its connection. It says that it is not connected and connections are available, but if I check if there are connections where I can connect it shows nothing. Even if, there is actually a wi-fi connection where my phone and other laptops connect. They dont seem to have problem with it. Just my laptop. After that happens, I usually restart my laptop but I discovered that troubleshooting it would somehow repair the problem, but not all the time. It says that restarting my wireless adapter do the job. Are there any long term fix? I mean that could last long or totally erase the problem? I have Atheros AR5B97 Wireless Network Adapter and Microsoft Virtual WiFi Miniport Adapter, both enabled. On the services, I have Wired AutoConfig and WLAN AutoConfig on Automatic. Aspire 4750, Windows 7 (x86)

    Read the article

  • Internet connection very slow after Linksys configuration

    - by NLV
    Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

    Read the article

  • Facebook doesn't work on computer, but work on mobile device, both use the same router

    - by sasa
    I have a very strange problem and I'm thinking that can be problem with dns or something similar, but not sure and don't know how to solve. My computer is connected to router and every site works fine except facebook (Chrome and Firefox). Chrome shows "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." But, on mobile device witch is connected to the same router facebook works fine (Fb application and Delphin browser). Pinging facebook works fine. Clearing cookies and cache didn't help. Also, I performed antivirus and antimalware scan and there is nothing. What can be a problem? Update: I'm also connect notebook on that wifi router, and on it works fine. nslookup facebook.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: facebook.com Addresses: 2a03:2880:2110:3f01:face:b00c:: 2a03:2880:10:1f02:face:b00c:0:25 2a03:2880:10:8f01:face:b00c:0:25 69.171.224.37 69.171.229.11 69.171.242.11 66.220.149.11 66.220.158.11

    Read the article

  • Trixbox CentOS Default GW Problem (Multi-homed server)

    - by slashp
    I'm having an issue with a CentOS trixbox server which is dual-homed (one private facing NIC [eth1], one internet-facing NIC [eth0]). I can't seem to get the default gateway to set properly to our ISP's GW via eth0. I've modified the /etc/sysconfig/network to contain both a GATEWAY & GATEWAYDEV line and removed the GATEWAY line from /etc/sysconfig/network-scripts/ifcfg-eth1 (as well as /etc/sysconfig/network-scripts/ifcfg-eth0). No default GW shows up in the routing table unless it's specified in the ifcfg-eth1 file (which both the wrong interface and wrong gateway IP), otherwise, the routing table simply does not contain a default gateway..any ideas would be greatly appreciated! Thanks! EDIT Just realized when attempting to add the default gateway manually using the route add command, I receive an error stating: SIOCADDRT: Network is unreachable I know this error can occur when your default gateway and interface IP address are not on the same subnet..in this case, my public IP address of eth0 is a /29.

    Read the article

  • hardware addressing and configurable addressing scheme

    - by Zia ur Rahman
    basically i want to ask question about configurable addressing scheme for LAN interface hardware. i have read about it from a book, some main points are given by a configurable addressing scheme provides a mechanism that a customer can use to set a physical address.The mechanism can be manual (the switches that must be set when the interface is first installed).or an electronic memory such as an EPROM that can be downloded from the computer(what does this means). Most hardware needs to be configured only once- configuration is usually done when the hardware is first installed. Question:Suppose a network administrator configures the LAN interface hardware (assigns the address) when he installs it. Now later on if he needs to change the physical address of the device can he change it? Or in this addressing scheme the hardware can only be configured once and we can not reconfigure it later on.

    Read the article

  • D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

    - by sil3nt
    Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

    Read the article

  • Getting Wireless working on Dell Inspiron 1545 in Ubuntu 10.04?

    - by Dexter
    I'm trying to install my wireless drivers (which uses a broadcom card). I tried to install them using the restricted drivers offered on my Ubuntu CD. However when I clicked activate it got about halfway through the install process before it gave me this error message: SystemError: installArchives() failed How can I correct this?

    Read the article

  • Listing the routing table takes long time to complete

    - by Rafal Rawicki
    When I print routes defined on my computer using route, it takes about 5 to 20 seconds to complete. Why does it take so much time? With VPN enabled: $ time sudo route Kernel IP routing table (...) real 0m21.423s user 0m0.000s sys 0m0.012s With no VPN, this is about 5 seconds - still, computer can do a lot in this time. I've repeated my measurements few times, getting very similar results each try. My machine is Ubuntu with 3.0.0 kernel, but as far as I know, route on the other computers works the same way.

    Read the article

  • Software for managing a gamenet

    - by Isaac
    I need a software for managing gamenet (Gamenet is like a cybercafe except people play games in gamenet instead of surfing the web!) The software should have this basic features: Accounting features (defining users, assigning a usage time to them, etc) Denying access to regular windows features (windows explorer, creating/editing/deleting files) Showing a list of available games to users to run. Creating login report I've tested a software named GamePort but it has some bugs and shortcomings.

    Read the article

  • Software for managing a gamenet

    - by Isaac
    I need a software for managing gamenet (Gamenet is like a cybercafe except people play games in gamenet instead of surfing the web!) The software should have this basic features: Accounting features (defining users, assigning a usage time to them, etc) Denying access to regular windows features (windows explorer, creating/editing/deleting files) Showing a list of available games to users to run. Creating login report I've tested a software named GamePort but it has some bugs and shortcomings.

    Read the article

  • UAE and the mysteries of unreachable websites

    - by 0plus1
    I write here because I'm really lost, please stay with me because it's not easy to explain. A company asked me to set-up a private server, now I'm a programmer so I got a solution with technical support and cpanel which helped me to setup everything and it's working smoothless. I'm by no means a professional sysadmin, but I have a fair knowledge of server configurations, but this problem is way over my knowledge, and apparently way over the knowledge of most sysadmins, I really hope that here I'll find someone with enough experience to help me or at least give me more insight. Now this company for which I'm consulting operates in the UAE (United Arab Emirates) and from there the server is almost unreachable. It started with ns not registering in the UAE, after a week that sorted itself out and now the site is indeed reachable, but it takes almost 2 minutes to load a webpage with one line of text. Emails go in timeout. The domain currently parked there has been bought appositely for tests, the main one that was supposed to go there, after a catastrophic week has been transferred to a shared hosting solution in the UK, and from there it works like a charme. Now after doing some research I discovered that I'm not alone in this, there are several reports of webmasters discovering that their website is not reachable inside the UAE, and mind this has nothing to do with the state-wide block of questionable sites, because in that case an error message appears, this seems to be related to the infrastructure of the UAE, which apparently reroutes everything through their own "fake" internet. Apparently new servers with their own IP are not recognized (yet?) by the UAE infrastructure, while shared hosting solutions seeing that they operates tons of other websites are more likely to be part of the UAE network. Now my questions are: 1) Has someone a real explanation for this? The only thing I can think of is that the server is on a new IP that is not yet recognized by the UAE, but that doesn't explain why it loads (even if after 2 minutes). I don't have any help from within the UAE as the only people that are "experts" are questionable companies that simply try to sell their own services. 2) If there is really some kind of block of new servers, is it possible to know before if a server is reachable from within the UAE, currently this is not a ns problem as even accessing the server with its IP result in a 2 minute wait. 3) Can it be that the problem lies somewhere else? There are some tests that I can perform? I'm not physically in the UAE, but I can ask the people there, or use teamviewer. Could it be some misconfiguration on the server (mind that the site works EVERYWHERE else in the world). Thank you for ANY kind of help

    Read the article

  • Sendind an internet radio singal from my hifi to a portable

    - by Paul
    I'm just about to set myself up with a wireless network in my house. This is so that I can intregate an internet radio into my hifi system. What I would love to do is to listen to the radio in another room of the house. I also have a little portable radio/cd player that has a USB port on the front. Is there something I could buy which would allow me to listen to the radio through my portable in another room? I do realize that I could solve this problem by buying some wireless portable speakers, however I just wondered if anybody knew another way i.e. bluetooth or something similar?

    Read the article

  • Setting up a Network Bridge on Linux VM (Windows 7 Host)

    - by GrandAdmiral
    I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

    Read the article

  • nagios wrongly reports packet loss

    - by Alien Life Form
    Lately, on my nagios 3.2.3 install (CentOS5, monitoring ~ 300 hosts, 1150 services) has sdtarted to occasionally report high packet loss on 50-60 hosts at a time. Problem is it's bogus. Manual runs of ping (or its own check_ping binary) finds no fault with any of the affected hosts. The only possible cures I found so far are: run all the checks manually (they will succeed but it may act up again on next check) acknowledge and wait for the problem to go away (may take several ours) I suspect (but have no particular reason other than single rescheduled checks succeeding) that the problem may lay with all the checks being mass scheduled together - in which case introducing some jitter in the scheduling (how?) might help. Or it may be something completely different. Ideas, anyone?

    Read the article

  • Server hard disk read speed and client download speed, is there a connection? [closed]

    - by Mywiki Witwiki
    Ok so a client's download speed is only as fast as a server's upload speed, and vice versa. Based on the answers to this post: Does upload speed depend upon download speed of the server? In other words, the data transfer rate between the two computers is only as fast as the speed of the "bottleneck". Let's pretend the two computers are in two different networks and both have 100Mbps internet connection. Ben wants a copy of a file in Mark's computer hard disk with 30Mbps read speed. Does this mean that Ben can download the file at a speed of around 30Mbps only, despite having an internet connection faster than 30Mbps?

    Read the article

  • Bridging my laptop's wireless and wired adaptors

    - by stacey.richards
    I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

    Read the article

  • Get OWA and ActiveSync working on server using HTTP redirect in IIS 7

    - by eric
    We have two servers on our LAN. One is a Windows 2003 Server domain controller running Exchange 2003. The other is a stand-alone Windows 2008 server running IIS 7. Our company website runs on the IIS 7 (2008) server, so the firewall forwards port 80 to this. How can I get OWA and ActiveSync to work with this setup? And without using SSL. I have tried setting up a website on the IIS 7 box (mail.ourdomain.com) and using HTTP redirect to point to http://mailserver/exchange, but this doesn't work. Do we have to purchase an SSL certificate for this to work?

    Read the article

  • 3 Servers, 2 Work Fine, One Has Network Issues

    - by ScaleOvenStove
    i have 3 servers, all relatively the same hardware/config, etc. I run some data pulls on all 3, and on 2 of them, they have 1 nic, and they work fine. On the other , there are 2 nics, and unless they are both plugged in or teamed, the processes time out. Any ideas on why this would be? It doesn't make sense to me, as the other two work fine with 1 nic and don't time out when running the same processes.

    Read the article

  • Can't get my Raspberry Pi to keep a static IP

    - by JonnyIrving
    I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

    Read the article

  • Always use one slow connection in preference of a "faster" one

    - by billc.cn
    In Windows, there's this automatic metric thing where the metric is selected according to the declared speed of the link. I now have a gigabit LAN routed to a 2MB DSL service and a HSDPA mobile broadband connection. The former is always chosen for Internet packets even though the latter is actually faster. I tried setting the mobile broadband's interface metric to 1 and raising its priority in the advanced settings of the adapter settings, but this does not seem to affect the metric of the default route. The default route to the Ethernet interface always have a lower metric than the mobile broadband interface. Am I missing something here?

    Read the article

  • Blocking ICMP outgoing requests only in eth1

    - by Raj
    I am creating a NAT with iptables: Computer A: eth0 (dhcp) + eth1 (static ip 192.168.0.1 - gateway) Computer B: eth1 (static ip 192.168.0.2, using Computer A as gateway) I know how to block ICMP outgoing requests (-A OUTPUT -p icmp --icmp-type echo-request -j DROP), but that would block ICMP requests from Computer A, but not from Computer B (in fact, only for Computer A - Computer B can keep doing those). I tried with the same command, but adding -o eth1, but that does not block at all. Any idea?

    Read the article

  • IPv6 - Public IPs, private IPs, IPs derived from the MAC address? Confused!

    - by sinni800
    I'm pretty much excited for IPv6 because of the large address room and (potential?) owning of more than one IP, or even tens of IPs (/122 subnet?) Though one magazine has now confused me. In a current issue (no. 3) of "CT", a German computer magazine, I read that when using IPv6 your IP address consists of your MAC address and various other things, and that this address will be public on the web, no matter what access point / LAN you connect to. My knowledge of IP(v6) is in contrary of this. I thought you will normally always have a a local network IP and NAT takes care of your Internet access, and your provider gives the NAT router an IP. I've heard of the 6to4 interface, but does this one give you your own ip in the IPv6 net? Personally I hope it still is through a personal IP space (like 192.168, 127.16-31, 10. in IPv4) in private networks with a NAT going to the Internet. And also I hope that providers will offer subnets to private customers so they don't have to use NAT anymore. Yay for converting your LAN into the WAN and using better security (so Computers from the same subnet still get access rights like normal).

    Read the article

  • Mac internet problems

    - by Bradley Herman
    Our office is set up with mostly macs (7 of them) but we do have a windows laptop and a windows desktop on the network as well. The network is configured with a modem going into a switch/router throughout the office to the computers, along with a wireless router. Everything runs fine most of the time, but periodically while using the web, certain sites will stop loading and timeout repeatedly. This usually lasts 20 minutes or so and can be incredibly annoying. Resetting the modem/router and/or rebooting the computer never helps. The weirdest part is that in almost every case, the websites are fine on our Windows machines. I frequently use github, google, Stack Overflow, and jQuery reference and I can count on the sites being unavailable to me at least once a day. While I can't get them to load, I can spin my chair around to the windows server behind me and load the sites just fine. Any idea what the hell could be going on here?

    Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >