Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 370/432 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

• Fixing Windows install by connecting it's hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Fixing Windows install by connecting its hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Reading log files from web application

  - by Egorinsk

  Hi! I want to write a small PHP application for monitoring logs on a Debian server, including syslog logs and Apache/PHP messages. The problem here is that Apache user (www-data) has no access to /var/log directory. What would be the best way to grant an access to logs for PHP application? Let's assume that log files can be really large, like hundreds of megabytes. I have some ideas: Write a shell script that would be run via sudo and tail last 512 Kb of log into a separate file that can be read by application - that's ineffective, because of forking a new process and having to read data twice Add www-data to adm group (that can read logs) - that's insecure Start a PHP process via cron every minute to read logs — that's not very good, because it doesn't allow real-time monitoring. Also, this script will be started even when I don't read logs, and consume CPU time (server is in the cloud, and I'll have to pay for it) Create a hardlink for all log files with lowered permissions - I guess, that won't work because logrotate could recreate log files and they'll change inode number. Start a separate nginx/Apache server under privileged user that may read logs. Maybe anyone got a better solution?

  Read the article

• Why am I getting programs stuck in log_wait_commit under Linux?

  - by staticsan

  There is something subtly wrong with my Linux install that I just can't locate. It is Ubuntu Lucid Lynx (10.04) 64-bit. Hardware is a Dell Optiplex 960: Intel Core 2 Quad CPU, 8Gb of RAM, 2x 300Gb HDDs. /home is ext2 on one disk and everything else is on the other (/ is also ext3). I have VirtualBox running a 64-bit Vista image for Outlook calendaring, but the heavyweight apps are IntelliJ, NetBeans, MySQL and Opera. Opera also loads my mail (IMAP) of which there is over 10,000 messages. The problem is that Opera stalls for a few seconds from time-to-time. Watching the process list shows it's in log_wait_commit which means (as far as I have figured out) the filesystem is holding things up. Sometimes I can make this happen by doing a subversion update, but usually it happens for no reason I can see. It usually happens to Opera, but I've seen NetBeans go under, too. It doesn't make the app crash - it's just completely unresponsive for a few seconds. Googling has not helped. The closest I got was to remove the sync attribute in the file system. This achieved nothing. On the advice of a Linux guru friend, I lowered /proc/sys/vm/dirty_writeback_centisecs to 300, but that didn't do anything, either. And it was all he could think of. What is going on and can I fix it? (And how?)

  Read the article

• How can I document and automate a system's configuration?

  - by Diomidis Spinellis

  Having a system's configuration represented by its current state is risky, inefficient, and opaque. At some point you may be left with an unsupported system and no upgrade path. Then configuring a new system compatible with the old is a process or trial and error. Furthermore, if at some point the system is damaged the only option is to go back to the most recent full backup, and try to remember what changes followed from that point. Also, the only way to create a system compatible with the original is through a complete dump/restore. Finally, in such a setup there's no way to know how you solved a particular problem; the only thing you can do is to look at the corresponding configuration files and try to guess what you changed to achieve the desired effect. Currently for each system I maintain, I keep a log file where I record all system administration activity, starting from the installation: installation options, added packages, changes in configuration files, updates, problem fixes etc. In theory this allows me to (manually) replay all changes to arrive at the current state, or to unroll an erroneous change by executing the reverse commands. However, this process is also inefficient, error-prone, and relies on human judgment. Another thing I've tried is to put /etc configuration files under version control with git. This helps me document the changes automatically and also apply them on a clean setup. But it's not without problems: git has to run under sudo, passwords and private keys may be stored in the repository, installed packages can't be meaningfully tracked, and git will have a fit if I try to extend this approach to all the system's directories. I've also thought about performing all changes through shell scripts or makefiles, but I think this process will require a lot of effort and will be fragile. Are there some better methods or tools that I'm missing?

  Read the article

• Does OS X support linux-like features?

  - by Xeoncross

  I have been using XP for almost a decade. Contrary to popular belief, it has served me well. In the last 4 years I don't remember ever having it crash on me. It has the most stable GUI I have ever used. However, an OS is only as good as it's GUI AND command line combined. Windows command line is awful and totally useless. So I have been using Ubuntu for a couple years and Debian on my servers. The only problem is that Gnome applications (ubuntu 6-10) constantly crash on me (Ubuntu Studio was the most unstable OS I ever used). I have high quality Gigabyte, MSI, and Asus motherboards and CPU's from old Semprons/Athlons to Celerons/Core 2 Quads. What are the odds that every PC I have ever owned can't remain stable with a linux GUI? Not to mention that Adobe CSx Suite doesn't work on linux. Anyway, I am now looking at moving to a MAC in the hope of finding a stable GUI and a feature-packed command line. Does Mac OS have an integrated command line where I can do linux-like-awesomeness like rsync, ssh, wget, crong jobs, package updates, and git without having an unstable GUI? Basically, until the linux GUI applications get a little better, is OS X what I need?

  Read the article

• Can't login after upgrading to Windows 8.1

  - by flatline

  This afternoon, I upgraded my work laptop from Windows 8 to Windows 8.1. I had previously had a local account, but after the upgrade, it prompted me to enter my windows account credentials, which I had set up beforehand at some point. I entered my password and clicked next, went through another screen or two, grew tired with the process, and clicked whatever the equivalent button to "skip this step" that I was presented with. Now I can't log in. Not with my (previous) local account password, and not with my windows account password. It's a Dell with biometric identification, which I had set up previously, so I put my finger on the reader and it complained that I couldn't use that fingerprint because I had changed my password. But, I hadn't wittingly changed my password at all. I assume that what happened is that, by entering my credentials, my local account was tied to the Windows account, but because I cancelled the process partway through, something went wrong and I cannot log in. A few questions: 1) How do I log in with my windows account credentials? Should LOCALMACHINENAME\username, which was my previous login method, still work for the Windows account? When I booted to safemode it prompted me with WindowsAccount\myemailaddress, which allowed me to login there, but the regular login doesn't accept the '@' symbol. 2) Is there any way to make that account local-only again? I can't find any way of doing it. 3) I managed to enable the local administrator account and get back into the box; failing all else, is there a quick way to migrate my old profile over to a new user?

  Read the article

• Performance-optimizing Oracle 10g on a server that is also a Tomcat JSP app server?

  - by PKHunter

  I have inherited a simple RedHat 5 - 64bit platform. It has SCSI disks on RAID1, with 16GB of RAM. Double Core CPU. Oracle 10g, Release 2. This would be a decent platform for running the DB only, perhaps, but the same server in an "A-A mode" clustering (very simple) also runs Tomcat and there are several Java servlets running on this. Sadly there is no caching platform etc. We only use an external CDN for some html caching. I am personally more familiar with web environments on the LAMPP platform (apache, php, mysql, postgresql). PROBLEM: Because the server has both Tomcat JSP/Java and Oracle 10g running on the same server, with no caching, I have some issues of the server going down. Often, sadly. QUESTION: What are my options in terms of improving performance of all these different apps? Connection Pooling? Example, in Postgresql world we have PgBouncer, which really helps things. Does Oracle have something similar? Or is there a famous Java-based external pooler that people use in production environments? (I'm not familiar with Java) Any "SQL cache" as in the MySQL and Postgresql world? Any other kind of application cache, as "APC" or "eAccelarator" in the PHP world? The "OSCache" stuff from the Java world (JSP thingie I found on Google: http://onjava.com/pub/a/onjava/2005/01/05/jspcache.html?page=2) ... What else? Sorry if this is a noob question. I have googled and googled, but problem is I don't know what to google for, other than the broad general concepts above. So if not full answers, I would even appreciate basic pointers and I am happy to JFGI myself. Thanks!

  Read the article

• Windows - Decrypt encrypted file when user account is destroyed

  - by dc2

  I have a Virtual Machine running on my Windows Server 2008 computer that originally was received by me encryped, as the builder of the VM did it on a MAC, which decrypts files by default. I never thought to decrypt these files, as they automatically 'decrypt' when you have permission over them, so the VM has been running for over a year despite the encryption. I just upgraded my computer to Domain Controller (dcpromo.exe). Now when I try to access/run the VM, I can't because I don't have permission to decrypt the files as that was on another logon (local administrator) and now I am the domain administrator. Apparently the local admin is totally nuked when you upgrade to domain controller. I have tried EVERYTHING - taking ownership of the files, which works. Doesn't do anything for me. Adding full control to everyone on the files. I go to File Properties Advanced Details (under encryption) Users who can access this file. The only user is administrator@localcomputername, and there is a cert number. I try adding a new cert, I don't have permission. I don't have permission to: Decrypt the file (access is denied). Copy the file (to another computer) - access denied. I am totally stumped and this VM is a production machine and needs to get up right now. Does anyone have any ideas?

  Read the article

• Searching SharePoint site with Windows Explorer

  - by alexsome

  Every week, I manually backup recent versions of the files on my group's SharePoint site. I open the library in Windows Explorer, search for all files modified in the past week, then copy and paste them to a network location. We need this process because our SharePoint site has a quota that we would easily meet if we had unlimited versions, so we keep a history of older versions on the network. Recently I got an upgrade to my work computer and I am unable to search the site using Windows Explorer. When I run the search for files modified in the last week no results are returned. If I run a search with no criteria on the file library, all the files are found but the "modified on" field is blank. So the search results only have the file and type fields. The new computer has Windows XP, just like the old one did. I hope this makes sense. Does anyone have any clue what the problem could be? I'd be happy to provide more info if necessary. It's bugging me to no end and I'm not even sure where to begin looking - it's either a trivial issue or a very obscure one. Thanks a lot.

  Read the article

• HAProxy appsession vs cookie precedence

  - by user1139473

  I am trying to find the best solution for balancing and keeping persistence on our application behind HAProxy. Here is our basic configuration: https://gist.github.com/endzyme/1804046b23c37beba520 After playing around with taking members down and up and also reloading the haproxy (with -sf) I have noticed that appsession isn't 100% effective, it would appear that sometimes it doesn't always 'request-learn'. I also tried to add a cookie JSESSION prefix to balance in case request-learn didn't take. Unfortunately it would present scenarios where the prefix would list svr2 but it was balanced to a different server. I am assuming it's because the appsession table takes first then sticks on that before using the cookie parameter. I have not tested with using cookie as an inserted option (not prefix on existing cookie) but I am thinking it would yield similar results. My question is: Which one is checked first, appsession or cookie, and is it an immediate catch after it reads the first one, or a fall through? Also as a follow up - is it not recommended to use both in the same backend? Cookie as I understand takes less memory resources, is agnostic to reloads and has way better reliability of persistence. Appsession I assume takes less cpu resource, since it's reading not writing. (Bonus Question: is there a way to inspect appsession/cookie table map? socket show table doesn't show anything except stick-tables) Many thanks in advance, -Nick

  Read the article

• How to improve network performance between two Win 2008 KMV guest having virtio driver already?

  - by taazaa

  I have two physical servers with Ubuntu 10.04 server on them. They are connected with a 1Gbps card over a gigabit switch. Each of these host servers has one Win 2008 guest VM. Both VMs are well provisioned (4 cores, 12GB RAM), RAW disks. My asp.net/sql server applications are running much slower compared to very similar physical setups. Both machines are setup to use virtio for disk and network. I used iperf to check network performance and I get: Physical host 1 ----- Physical Host 2: 957 Mbits/sec Physical host 1 ----- Win 08 Guest 1: 557 Mbits/sec Win 08 Guest 1 ----- Phy host 1: 182 Mbits/sec Win 08 Guest 1 ----- Win 08 Guest 2: 111 Mbits /sec My app is running on Win08 Guest 1 and Guest 2 (web and db). There is a huge drop in network throughput (almost 90%) between the two guest. Further the throughput does not seem to be symmetric between host and guest as well. The CPU utilization on the guests and hosts is less than 2% right now (we are just testing right now). Apart from this, there have been random slow downs in the network to as low as 1 Mbits/sec making the whole application unusable. Any help to trouble shoot this would be appreciated.

  Read the article

• Are these hardwares compatible?

  - by Tom Kaufmann

  I am trying to upgrade my new machine but I want to do it myself. This is my 1st attempt at building system. After carefully reading reviewing feedback and my budget I have decided to select the below listed components. Can anybody let me know are they compatible or not? Transcend 64 GB 2.5" SATA Solid State Drive Asus GeForce GTX550 1GB DDR5 ENGTX550 TI DI/1GD5 Graphics Card Seagate Barracuda 1 TB HDD Internal Hard Drive Cooler Master eXtreme Power Pro 600 Power Supply Intel Core i5 2500K Sandy Bridge 3.30 GHz 95 W 4 Core Desktop Processor Intel DX79TO Motherboard Corsair CMZ8GX3M2A1600C9 8 GB DDR3 SDRAM 1600 MHz Dual Channel Kit Desktop Memory Sony AD-7260S-ZS Internal DVD Writer - Black Cooler Master Hyper TX3 EVO Intel CPU Cooler Cooler Master Elite 335U Cabinet LG E2051T 20.1 Inch SuperSlim Monitor Is any of these hardware components incompatible with I5 2500K? If you have any other suggestions for selecting any other harwdware that can boost up my performance or lower my cost while having the same performance, please suggest. But my primary questions is whether they are compatible or not! Any help is appreciated. Thank you.

  Read the article

• Windows Server 2008 Alerting to Low memory

  - by t1nt1n

  I have a file and print server running on Windows 2008 R2 fully patched in a VSphere environment (ESXi 5.1 fully updated). Every evening between 19:20 and 19:30 our monitoring software reported that the available memory is 1% and performance is dire. There is nothing in the event logs to point to an issue. At this point in the evening I am general the only user on the system to check to see why these alerts are going off. Things I have done; Checked to see if any backups are running – None at all. Checked Scheduled tasks – None before or during this time period. Moved the VM to another host. AV is disabled to rule out that as the issue. The server does not have any problems during the day with memory when fully loaded with about 50 users. The server did have 4GB ram provisioned but I have increased this to 5Gb. Running PrefMon at the time (I will save the graphs tonight) There very little CPU usage at the time but RAM usage goes up.

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

  - by Dominick1978

  I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

  Read the article

• How many connections are allowed to a Windows 7 Home Premium shared folder or printer?

  - by lcbrevard

  I have a client who runs a small business with 4 desktop systems, two of which are inexpensive [ The XP Pro system is currently being used as a file "server" for time sheets and QuickBooks data. It also shares an HP ink jet printer. The client wishes to decommission this system because (1) it's ugly [it is] and (2) it uses too much power [it does]. If we share a folder on one of the Windows 7 Home Premium systems will there be a problem connecting to it with up to 3 other computers? What about the printer sharing? I vaguely remember seeing that Windows 7 is less usable for "server" purposes and has severe restrictions on the number of clients. But I cannot seem to find those numbers. In my own network (over 12 systems) we have no problem sharing from Windows 7 Ultimate to a few other systems where needed. I am embarrassed that I cannot seem to find the answer to this in a couple of days of searching. I can do an anytime upgrade of one of these systems to Pro if that would improve the ability to share from it. I am not able to convince the client to put a "real server" into their network.

  Read the article

• Minecraft server hosting hardware specifications [on hold]

  - by Andrew Wright

  I am planning on purchasing a server to rent off Minecraft game servers, largely to friends. I am planning on purchasing a 128GB RAM server to save on colocation costs (as I am likely to need more than 32GB and would have to rent 2U of space...) I am hoping for some advice about the processing power needed to deal with this level of RAM. The servers will be run in a shared environment on linux in a VM to make backups easier. The server I have in mind is dual CPU. I have been considering at the low end dual Xeon E5-2609V2 Quad-Core 2.5Ghz, and at the high end dual Xeon E5-2650V2 Eight-Core 2.6Ghz. The difference between these is 6.4 GT/s and 8 GT/s and £3000 for the lower spec server, £4300 for the higher spec. I was hoping I could get advice about whether it is worth paying for the extra/higher speed processor or if I would be wasting my money? Thank you for any help - I appreciate that this is not directly related to professional system administration.

  Read the article

• [SOLVED} How do I restore my audio after uninstalling Ventrilo?

  - by Marcx

  Hi, I've a Dell studio 1555 bought on september with Windows 7 64bit Professional on it. The audio device works proprerly, while listening to audio contents (from disk or internet) When I use Ventrilo, the audio from other people sounds good and I hear their voices clearly When I use any other VOIP programs like Teamspeak 3, MSN or Skype, I hear a disturbed voice, and it's impossible to comprehend something... Anyway everything worked fine until I installed Ventrilo, but removing it didn´t solve my problem. Update: Here's a sample of how I hear others people voices.. Audio Sample After some tests, also the desktop has the same problem. (I tried TeamSpeak3) Here are some details on my laptop and desktop Laptop Dell Studio 1555 Core 2 Duo P8600 2.4Ghz 4Gb Ram Dual Channel Ati HD 4570 512Mb dedicated (up to 2048) IDT High Definition Audio Desktop Motherboard Asus P5KPL-AM Dual Core CPU E5200 2.50Ghz 2x2GB PC6400 Dual Channel Ati Radeon HD 4650 512MB VIA High Definition Audio Both computers have Windows 7 Professional 64Bit. So how do I restore my audio? SOLVED The problem was in router firmware, there was a bug that recognized VoIP traffic as a DOS attack and the router grambled every packet... I've installed the newest firmware and everything is fine :)

  Read the article

• Protocol (or service publish/discovery) to detect devices in network

  - by Gobliins

  we connect some embedded devices in a network. What i am looking for now, is a way to find the devices IP and identify them. We work with Windows PC´s and i am about to write a C# tool that should do this. I thought about send a udp broadcast and in the ack i.e. is the device´s ip, which would mean the device needs a daemon runnig to assign an ip itself. Running a service (like a printer) on the device, and on the PC just lookup for the service. I read about some things like apipa, zeroconf, ipv4 local link, bonjour, dns-sd, mdns, bonjour; They can automatically assign ip´s and publish services in a network. My Question is, can someone recommend me what would be good for my task? -The protocol or Service should be low on ressource (memory/cpu usage) use. -Are there some standard protocolls to use? -Is DNS a good idea or would it be to ressource consumpting just for finding a device´s IP? -Should also work when no dhcp servers are around. edit: To clarify a bit: The IP configuration is automatic. The problem to focus is how to tell the PC which IP in the network (or a direct connection in this vase there would only be one) belongs to the device (identity).

  Read the article

• Where can someone store >100GB of pictures online? [closed]

  - by sbi

  A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

  Read the article

• Mysql InnoDB and quickly applying large updates

  - by Tim

  Basically my problem is that I have a large table of about 17,000,000 products that I need to apply a bunch of updates to really quickly. The table has 30 columns with the id set as int(10) AUTO_INCREMENT. I have another table which all of the updates for this table are stored in, these updates have to be pre-calculated as they take a couple of days to calculate. This table is in the format of [ product_id int(10), update_value int(10) ]. The strategy I'm taking to issue these 17 million updates quickly is to load all of these updates into memory in a ruby script and group them in a hash of arrays so that each update_value is a key and each array is a list of sorted product_id's. { 150: => [1,2,3,4,5,6], 160: => [7,8,9,10] } Updates are then issued in the format of UPDATE product SET update_value = 150 WHERE product_id IN (1,2,3,4,5,6); UPDATE product SET update_value = 160 WHERE product_id IN (7,8,9,10); I'm pretty sure I'm doing this correctly in the sense that issuing the updates on sorted batches of product_id's should be the optimal way to do it with mysql / innodb. I'm hitting a weird issue though where when I was testing with updating ~13 million records, this only took around 45 minutes. Now I'm testing with more data, ~17 million records and the updates are taking closer to 120 minutes. I would have expected some sort of speed decrease here but not to the degree that I'm seeing. Any advice on how I can speed this up or what could be slowing me down with this larger record set? As far as server specs go they're pretty good, heaps of memory / cpu, the whole DB should fit into memory with plenty of room to grow.

  Read the article

• Auto-restart mysql when it dies

  - by Los Frijoles

  I have a rackspace server that I have been renting to run my personal projects upon. Since I am cheap, it has 256Mb of RAM and honestly can't handle alot. Every once in a while, when there is a sharp uptick in traffic, the server decides to start killing processes and it seems that mysqld is a popular one for it to kill. I try to visit my site and am greeted with the message that there was an error establishing the database connection. Inspection of the logs reveals that mysqld was killed due to lack of memory. Since I am still as poor as I was yesterday and don't want to upgrade my rackspace VM's RAM, is there a way I can tell it to automagically restart mysqld when it dies? I have a thought to use something like crontab, but alas, I don't know exactly what to do there either. I guess I am product of the "Linux on your desktop" generation since I can do most things on my desktop and laptop (which run Linux almost exclusively), but still lack a lot of server administration skills for Linux. The server runs CentOS 6.3

  Read the article

• 2.6.9 Kernel on virtual server (non upgradable) - any expected problems?

  - by chris_l

  Hi, I'm considering to rent a virtual server (for me personally). The product I'm currently looking at offers IMO fair pricing, very good hardware etc. The only problem is, that I won't be able to do an upgrade to a newer kernel than 2.6.9 (running Debian Etch). Also, I can't install my own kernel modules. (The server runs with Virtuozzo, so as far as I understand it, it just does some chroot instead of a real virtualization (?)) I want to run GlassFish, Postgres, Subversion, Trac and maybe some other things on it. It will also have to employ a firewall, and provide OpenSSL for https. Ideally, it would also be able to do AIO (asynchronous IO), which could speed up some server I/O. Should I expect problems with that old kernel version, in conjunction with the software I want to install (I'd like to use current versions of the software)? One thing I already found out, is that you can't do everything with iptables, since some kernel modules are missing/things are not build into the kernel. GlassFish v3 appears to run fine at first glance. I was able to test the server for a few hours. Installing my whole setup wasn't feasible in that time, but what I can say is, that it's amazingly fast for an entry-level vserver, especially hard disk and network performance (averaging at ca. 400MBit/s). So if the kernel won't be a problem, I'd really like to take it. Thanks, Chris PS Exact kernel version: 2.6.9-023stab051.3-smp

  Read the article

• ImageMagick installation confusion

  - by Codemonkey

  Well this is turning out to be a pain. I'm on CentOS 6.5. I saw on the PECL ImageMagick changelog that they added a load of constants for new filters, such as LANCZOS2SHARP. Some testing I did earlier suggested that PhotoShop 6.5 was able to downsize photos with better clarity than my current ImageMagick's best effort of LANCZOS, so I thought I'd try to upgrade to test out the newer filters. So, first port of call - get source from pecl for 3.2.0RC1. Installed with no problems. But, ah-ha. Although it says it only requires IM 6.2.4, the filters I'm after don't work unless you have 6.6.6+ So I go http://www.imagemagick.org/script/install-source.php to install the newest version. This is the bit that's puzzled me. It all appears to have installed fined. The tests work fine, passing 40 out of 40. If I run identify -version on the command line it outputs 6.8.9 But if I echo Imagick::getVersion() in PHP it shows 6.5.4, even after restarting php-fpm. rpm -qa | grep ImageMagick shows that I still have 6.5.4 installed locate ImageMagic also only seems to show the 6.5.4 one I feel that the missing link here is ImageMagick-devel, do I need to install that too? How do I go about doing that? Or do I just need to reinstall the pecl-imagemagick 3.2.0RC1 now that I have the latest IM installed?

  Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >