Search Results

Search found 25999 results on 1040 pages for 'agile development'.

Page 382/1040 | < Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >

• Limit The Game Loop?

  - by user1758938

  How do I make a game go at the same speed? You probly dont understand that so here are examples: This Would Loop Too Fast while(true) { GetInput(); Render(); } This Just Wont Work, Hard To Exlplain while(true) { GetInput(); Render(); Sleep(16); } Basicly How Do I Sync It To Any FrameRate And Still Have To Input And Funtions Going At The Same Rate?

  Read the article

• Rotation of bitmap using a frame by frame animation

  - by pengume

  Hey every one I know this has probably been asked a ton of times but I just wanted to clarify if I am approaching this correctly, since I ran into some problems rotating a bitmap. So basically I have one large bitmap that has four frames drawn on it and I only draw one at a time by looping through the bitmap by increments to animate walking. I can get the bitmap to rotate correctly when it is not moving but once the animation starts it starts to cut off alot of the image and sometimes becomes very fuzzy. I have tried public void draw(Canvas canvas,int pointerX, int pointerY) { Matrix m; if (setRotation){ // canvas.save(); m = new Matrix(); m.reset(); // spriteWidth and spriteHeight are for just the current frame showed m.setTranslate(spriteWidth / 2, spriteHeight / 2); //get and set rotation for ninja based off of joystick m.preRotate((float) GameControls.getRotation()); //create the rotated bitmap flipedSprite = Bitmap.createBitmap(bitmap , 0, 0,bitmap.getWidth(),bitmap.getHeight() , m, true); //set new bitmap to rotated ninja setBitmap(flipedSprite); // canvas.restore(); Log.d("Ninja View", "angle of rotation= " +(float) GameControls.getRotation()); setRotation = false; } And then the Draw Method here // create the destination rectangle for the ninjas current animation frame // pointerX and pointerY are from the joystick moving the ninja around destRect = new Rect(pointerX, pointerY, pointerX + spriteWidth, pointerY + spriteHeight); canvas.drawBitmap(bitmap, getSourceRect(), destRect, null); The animation is four frames long and gets incremented by 66 (the size of one of the frames on the bitmap) for every frame and then back to 0 at the end of the loop.

  Read the article

• Pathfinding library

  - by Shivan Dragon

  I'm an amateur game developer and somewhat amateur Java developer as well. I'm trying to find a way to have path finding for my game(s). I've first Googled for some existing Java libraries that have various path-finding implementations, but I've failed to find any. It seems to me that the only way to get pathfinding code is to use it via a game engine (like Unity). But I'd just like to have a library that I can use and make the game loop and other stuff on my own. Failing to find such a library I've tried implementing some algorithms myself. I've managed to make a running A* in Java, but for fancier stuff like D* I find it hard to do it by hand. So then, my question is, are there any Java libraries that contain at least some basic pathfinding algorithms implementations?

  Read the article

• How to impale and stack targets correctly according to the collider and its coordinate?

  - by David Dimalanta

  I'm making another simple game, a catch game, where a spawning target game object must be captured using a skewer to impale it. Here how: At the start, the falling object (in red) will fall in a vertical direction (in blue) When aimed properly, the target will fall down along the line of the skewer. (in blue) Then, another target is spawned and will fall vertically. (in red) When aimed successfully again in a streak, the second target will fall along the skewer and stacked. Same process over and over when another target is spawned. However, when I test run it on the scene tab in Unity, when impaled several targets, instead of a smooth flow and stacking it ended up overlaying it instead of stacking it up like a pancake. Here's what it look like: As I noticed when reaching the half-way of my progress, I tried to figure out how to deal with collider bodies without sticking each other so that it will actually stack like in the example of the image at no. 3. Here's the script code I added in the target game object: using UnityEngine; using System.Collections; public class ImpaleStateTest : MonoBehaviour { public GameObject target; public GameObject skewer; public bool drag = false; private float stack; private float impaleCount; void Start () { stack = 0; impaleCount = 0; } void Update () { if(drag) { target.transform.position = new Vector3 (DragTest.dir.transform.position.x, DragTest.dir.transform.position.y - 0.35f, 0); target.transform.rotation = DragTest.degrees; target.rigidbody2D.fixedAngle = true; target.rigidbody2D.isKinematic = true; target.rigidbody2D.gravityScale = 0; if(Input.GetMouseButton(0)) { Debug.Log ("Skewer: " + DragTest.dir.transform.position.x); Debug.Log ("Target: " + target.transform.position.x); } } } void OnTriggerEnter2D(Collider2D collider) { impaleCount++; Debug.Log ("Impaled " + impaleCount + " time(s)!"); drag = true; audio.Play (); } } Aside from that, I'm not sure if it's right but, the only way to stick the impaled targets while dragging the skewer left or right is to get the X coordinates from the skewer only. Is there something else to recommend it in order to improve this behavior as realistic as possible? Please help.

  Read the article

• Poor mobile performance when running from Eclipse

  - by Yajirobe_LOL

  So after weeks of thinking my rendering code was bad, I accidentally discovered the following: Running my game on a Nexus S From Eclipse (Debug as - Android application): 12fps From the device while still attached to USB (getting log info in Eclipse still): 24fps From the device while not attached via USB: 56fps I was wondering if anyone else has issues like this? I mean, the problem really isn't a problem since the final release build will likely have good performance, but for the time being I don't want to have to keep (un)plugging my device in and out when testing code all day long. Is there some remedy for this or does anyone have any input/advice? Thanks.

  Read the article

• Developing for Chrome App/Android?

  - by Johnny Quest

  I have been developing for win7 mobile (XNA/silverlight and will continue to do so, love everything about it) but I wanted to branch a few of my more polished games to google app store online, and perhaps android(though not sure, as with all the different versions it makes learning/loading applications a bit tricky) What is the most versatile language to start learning from chrome apps/android: Java would be excellent for android, but could I port it to a web app for chrome? (and its close to C#) Flash would work for a web app as I can just embed it into a html page (have done actionscript before, didn't care much for the IDE though), but would it also work on android? or I guess there is always C/C++ but haven't heard much about that, though I think it works for both (though C++ does interest me) Any advice would be excellent, thanks.

  Read the article

• Creating a python android application

  - by Harry

  I need help creating a android app on python. I'm creating an actual android game on python to use on my phone. I need suggestions of what app people would prefer. Anything you have have always wanted on your phone but no ones made it? Please post some suggestions below. I will start writing the code soon and will keep updating this post or creating a new ones asking new questions, so please keep an eye out. I also need help and software on how to start writing the code and how to test it. Thanks in advance.

  Read the article

• Unity: Spin wheels to move vehicle

  - by Paul Manta

  I am just getting started with Unity and I'd like to ask a question. If I have a "Vehicle" object that has two children: "FrontWheel" and "BackWheel" (both 'wheels' are cylinders), how should I set everything up such that I can move the entire vehicle by turning its wheels? When I apply a torque to "FrontWheel", the vehicle starts to move, but instead of the whole thing the moving together, the chassis is rolling on the cylinders and eventually falls off. How can I prevent it from doing that?

  Read the article

• SlimDX and Parsing .X Files

  - by P. Avery

  I'm trying to parse a .x file using SlimDX. I can create the XFile object and register templates but I'm having problems with the enumeration object. The enumeration object has a child count of 0 for a file I know to have valid data. Here is code to create file, enumeration, and data objects: public void Parse(string filename, string templates, ref Frame aParam) { XFile xfile = null; XFileEnumerationObject enumObj = null; XFileData dataObj = null; // create file object xfile = new XFile(); // register templates if (xfile.RegisterTemplates(XFile.DefaultTemplates).IsFailure) { Console.WriteLine(Result.Last); xfile.Dispose(); return; } // create enumeration object enumObj = xfile.CreateEnumerationObject(filename, System.Runtime.InteropServices.CharSet.Auto); if (enumObj == null) { xfile.Dispose(); return; } // get child count( returns 0 here ) long ncElements = enumObj.ChildCount; for (int i = 0; i < ncElements; ++i) { // never reached... dataObj = enumObj.GetChild(i); if (dataObj.IsReference) continue; try { Parse(dataObj, ref aParam); } catch (Exception e) { e.Write(); } finally { dataObj.Dispose(); } } enumObj.Dispose(); xfile.Dispose(); } ...There are no exceptions thrown by this function...the child count is 0 so the conditional loop breaks right away, the file objects are disposed of and the function returns... Here is .x file...a simple cube: xof 0303txt 0032 Frame Root { FrameTransformMatrix { 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000;; } Frame Cube { FrameTransformMatrix { 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000;; } Mesh Cube{ //Cube Mesh 36; -1.000000; 1.000000; 1.000000;, -1.000000;-1.000000; 1.000000;, 0.999999;-1.000001; 1.000000;, -1.000000;-1.000000;-1.000000;, 1.000000;-1.000000;-1.000000;, 0.999999;-1.000001; 1.000000;, 1.000000; 0.999999; 1.000000;, -1.000000; 1.000000; 1.000000;, 0.999999;-1.000001; 1.000000;, -1.000000; 1.000000;-1.000000;, -1.000000;-1.000000;-1.000000;, -1.000000; 1.000000; 1.000000;, -1.000000; 1.000000; 1.000000;, 1.000000; 0.999999; 1.000000;, 1.000000; 1.000000;-1.000000;, 1.000000; 0.999999; 1.000000;, 0.999999;-1.000001; 1.000000;, 1.000000;-1.000000;-1.000000;, -1.000000;-1.000000;-1.000000;, -1.000000;-1.000000; 1.000000;, -1.000000; 1.000000; 1.000000;, 1.000000; 1.000000;-1.000000;, 1.000000;-1.000000;-1.000000;, -1.000000; 1.000000;-1.000000;, 1.000000; 1.000000;-1.000000;, 1.000000; 0.999999; 1.000000;, 1.000000;-1.000000;-1.000000;, -1.000000; 1.000000;-1.000000;, -1.000000; 1.000000; 1.000000;, 1.000000; 1.000000;-1.000000;, -1.000000;-1.000000; 1.000000;, -1.000000;-1.000000;-1.000000;, 0.999999;-1.000001; 1.000000;, 1.000000;-1.000000;-1.000000;, -1.000000;-1.000000;-1.000000;, -1.000000; 1.000000;-1.000000;; 12; 3;0;1;2;, 3;3;4;5;, 3;6;7;8;, 3;9;10;11;, 3;12;13;14;, 3;15;16;17;, 3;18;19;20;, 3;21;22;23;, 3;24;25;26;, 3;27;28;29;, 3;30;31;32;, 3;33;34;35;; MeshNormals { //Mesh Normals 36; 0.000000;-0.000000; 1.000000;, 0.000000;-0.000000; 1.000000;, 0.000000;-0.000000; 1.000000;, -0.000000;-1.000000;-0.000000;, -0.000000;-1.000000;-0.000000;, -0.000000;-1.000000;-0.000000;, -0.000000;-0.000000; 1.000000;, -0.000000;-0.000000; 1.000000;, -0.000000;-0.000000; 1.000000;, -1.000000; 0.000000;-0.000000;, -1.000000; 0.000000;-0.000000;, -1.000000; 0.000000;-0.000000;, 0.000000; 1.000000; 0.000000;, 0.000000; 1.000000; 0.000000;, 0.000000; 1.000000; 0.000000;, 1.000000;-0.000001; 0.000000;, 1.000000;-0.000001; 0.000000;, 1.000000;-0.000001; 0.000000;, -1.000000; 0.000000;-0.000000;, -1.000000; 0.000000;-0.000000;, -1.000000; 0.000000;-0.000000;, 0.000000; 0.000000;-1.000000;, 0.000000; 0.000000;-1.000000;, 0.000000; 0.000000;-1.000000;, 1.000000; 0.000000;-0.000000;, 1.000000; 0.000000;-0.000000;, 1.000000; 0.000000;-0.000000;, 0.000000; 1.000000; 0.000000;, 0.000000; 1.000000; 0.000000;, 0.000000; 1.000000; 0.000000;, -0.000000;-1.000000; 0.000000;, -0.000000;-1.000000; 0.000000;, -0.000000;-1.000000; 0.000000;, 0.000000;-0.000000;-1.000000;, 0.000000;-0.000000;-1.000000;, 0.000000;-0.000000;-1.000000;; 12; 3;0;1;2;, 3;3;4;5;, 3;6;7;8;, 3;9;10;11;, 3;12;13;14;, 3;15;16;17;, 3;18;19;20;, 3;21;22;23;, 3;24;25;26;, 3;27;28;29;, 3;30;31;32;, 3;33;34;35;; } //End of Mesh Normals MeshMaterialList { //Mesh Material List 1; 12; 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0;; Material Material { 0.640000; 0.640000; 0.640000; 1.000000;; 96.078431; 0.500000; 0.500000; 0.500000;; 0.000000; 0.000000; 0.000000;; TextureFilename {"Yellow.jpg";} } } //End of Mesh Material List MeshTextureCoords UVMap{ //Mesh UV Coordinates 36; 0.000000; 1.000000;, 1.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 1.000000;, 0.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 1.000000;, 1.000000; 0.000000;, 1.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 0.000000;, 0.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 0.000000;, 0.000000; 1.000000;, 1.000000; 1.000000;, 1.000000; 0.000000;; } //End of Mesh UV Coordinates } //End of Mesh Mesh } //End of Cube } //End of Root Frame

  Read the article

• OpenGL - Calculating camera view matrix

  - by Karle

  Problem I am calculating the model, view and projection matrices independently to be used in my shader as follows: gl_Position = projection * view * model * vec4(in_Position, 1.0); When I try to calculate my camera's view matrix the Z axis is flipped and my camera seems like it is looking backwards. My program is written in C# using the OpenTK library. Translation (Working) I've created a test scene as follows: From my understanding of the OpenGL coordinate system they are positioned correctly. The model matrix is created using: Matrix4 translation = Matrix4.CreateTranslation(modelPosition); Matrix4 model = translation; The view matrix is created using: Matrix4 translation = Matrix4.CreateTranslation(-cameraPosition); Matrix4 view = translation; Rotation (Not-Working) I now want to create the camera's rotation matrix. To do this I use the camera's right, up and forward vectors: // Hard coded example orientation: // Normally calculated from up and forward // Similar to look-at camera. Vector3 r = Vector.UnitX; Vector3 u = Vector3.UnitY; Vector3 f = -Vector3.UnitZ; Matrix4 rot = new Matrix4( r.X, r.Y, r.Z, 0, u.X, u.Y, u.Z, 0, f.X, f.Y, f.Z, 0, 0.0f, 0.0f, 0.0f, 1.0f); This results in the following matrix being created: I know that multiplying by the identity matrix would produce no rotation. This is clearly not the identity matrix and therefore will apply some rotation. I thought that because this is aligned with the OpenGL coordinate system is should produce no rotation. Is this the wrong way to calculate the rotation matrix? I then create my view matrix as: // OpenTK is row-major so the order of operations is reversed: Matrix4 view = translation * rot; Rotation almost works now but the -Z/+Z axis has been flipped, with the green cube now appearing closer to the camera. It seems like the camera is looking backwards, especially if I move it around. My goal is to store the position and orientation of all objects (including the camera) as: Vector3 position; Vector3 up; Vector3 forward; Apologies for writing such a long question and thank you in advance. I've tried following tutorials/guides from many sites but I keep ending up with something wrong. Edit: Projection Matrix Set-up Matrix4 projection = Matrix4.CreatePerspectiveFieldOfView( (float)(0.5 * Math.PI), (float)display.Width / display.Height, 0.1f, 1000.0f);

  Read the article

• Changing Palette for Day/Light Mode using GIMP

  - by J.C.

  Hello, Suppose I've a picture, which want to achieve day/light mode by changing 8bpp color palette. If I want the pixel index of my picture is always fixed for both day mode and night mode. For example, the 1st pixel index is 100. Which I can look up index 100 in day mode palette and night mode palette. How can I use GIMP to do so? My goal is to not update my pixel index of my picture. Also, as you see in two palette, they are not one one mapping. That is index 1 of the day mode palette and index 1 of the night mode palette may not used in the same pixel of the picture, how can I tackle this problem? Actually, my use case is as follow I want to use one 8bpp picture to achieve day/night mode by update only the color palette (without updating the pixel index). The advantage is I only have to prepare 2 256 byte palette rather than saving 2 big pictures in my limited data ram. Thanks a lot

  Read the article

• Setting effects variables in XNA

  - by Badescu Alexandru

  Hello ! I am currently reading a book named "3D Graphics with XNA Game Studio 4.0" by Sean James and have some questions to ask : If i create a effect parameter named lets say SpecularPower and have in my effect a variable named SpecularPower , if i do something like effect.Parameters["SpecularPower"].SetValue(3) That wil change the SpecularPower variable in my effect ? And a second question, not regarding the book : If i have a spaceship and i've created a "boost" functionality that speeds up my spaceship, what effects should i implement to create the impresion oh high speed ? I was thinking of making everything except my spaceship blurry but i think there would be something missing . Any ideas ? Regards, Alex Badescu

  Read the article

• How do I import service references to Unity3D?

  - by Timothy Williams

  I'm attempting access a service reference in Unity. I need two: the SOAP framework and a separate service called ContentVault. The respective service URL's are: SOAP: http://api.microsofttranslator.com/V2/Soap.svc ContentVault: http://ioun.wizards.com/ContentVault.svc Both services import fine in to Visual Studio. I've tried everything I can think of but they won't work with Unity. I just get various errors (changing depending on which solution I'm trying out). I've attempted using svcutil to export the services as external scripts, but all I got was a bunch of using errors. I've tried converting the code to work with .NET 2.0 to no avail, I've even tried making the services in to .DLL's to no success. How could get these services working with Unity?

  Read the article

• Problem with Ogmo Editor (is Tiled Editor a solution?)

  - by Mentoliptus

  I made a level editor for a puzzle game with Ogmo Editor and gave it to our designer/level designer. When he downloaded and started Ogmo, his CPU went to 100%. I looked at my CPU usage while Ogmo is running, and it goes from 20% to 30% (which is also high for an application alike Ogmo). He has a Windows 7 VM running on his Mac and I have a normal Windows PC, can this be a problem? I found a thread on FlashFunk forum that confirms that Ogmo has CPU usage issues. Has anybody maybe solved this issue? The solution seems to use Tiled Editor, but I never used it before. Is it difficult to change a level editor from Ogmo to Tiled? Can they export in the same format (XML with CSV elements for my puzzle game)?

  Read the article

• Prototype experience: Unity3D vs UDK

  - by LukeN

  Has anyone yet prototyped a game in both Unity3D and UDK? If so, which features made prototyping the game easier or more difficult in each toolkit? Was one prototype demonstrably better than the other (given the same starting assets)? I'm looking for specific answers with regard to using the toolkit features, not a comparison of available features. E.g. Destructable terrain is easier in toolkit X for reasons Y and Z. I can code, so the limitations of the inbuilt scripting languages are not a problem.

  Read the article

• How do I draw a scene with 2 nested frames

  - by Guido Granobles

  I have been trying for long time to figure out this: I have loaded a model from a directx file (I am using opengl and Java) the model have a hierarchical system of nested reference frames (there are not bones). There are just 2 frames, one of them is called x3ds_Torso and it has a child frame called x3ds_Arm_01. Each one of them has a mesh. The thing is that I can't draw the arm connected to the body. Sometimes the body is in the center of the screen and the arm is at the top. Sometimes they are both in the center. I know that I have to multiply the matrix transformation of every frame by its parent frame starting from the top to the bottom and after that I have to multiply every vertex of every mesh by its final transformation matrix. So I have this: public void calculeFinalMatrixPosition(Bone boneParent, Bone bone) { System.out.println("-->" + bone.name); if (boneParent != null) { bone.matrixCombined = bone.matrixTransform.multiply(boneParent.matrixCombined); } else { bone.matrixCombined = bone.matrixTransform; } bone.matrixFinal = bone.matrixCombined; for (Bone childBone : bone.boneChilds) { calculeFinalMatrixPosition(bone, childBone); } } Then I have to multiply every vertex of the mesh: public void transformVertex(Bone bone) { for (Iterator<Mesh> iterator = meshes.iterator(); iterator.hasNext();) { Mesh mesh = iterator.next(); if (mesh.boneName.equals(bone.name)) { float[] vertex = new float[4]; double[] newVertex = new double[3]; if (mesh.skinnedVertexBuffer == null) { mesh.skinnedVertexBuffer = new FloatDataBuffer( mesh.numVertices, 3); } mesh.vertexBuffer.buffer.rewind(); while (mesh.vertexBuffer.buffer.hasRemaining()) { vertex[0] = mesh.vertexBuffer.buffer.get(); vertex[1] = mesh.vertexBuffer.buffer.get(); vertex[2] = mesh.vertexBuffer.buffer.get(); vertex[3] = 1; newVertex = bone.matrixFinal.transpose().multiply(vertex); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[0])); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[1])); mesh.skinnedVertexBuffer.buffer.put(((float) newVertex[2])); } mesh.vertexBuffer = new FloatDataBuffer( mesh.numVertices, 3); mesh.skinnedVertexBuffer.buffer.rewind(); mesh.vertexBuffer.buffer.put(mesh.skinnedVertexBuffer.buffer); } } for (Bone childBone : bone.boneChilds) { transformVertex(childBone); } } I know this is not the more efficient code but by now I just want to understand exactly how a hierarchical model is organized and how I can draw it on the screen. Thanks in advance for your help.

  Read the article

• Is dynamic casting Entities A good design?

  - by Milo

  For my game, Everything inherits from Entity, then other things like Player, PhysicsObject, etc, inherit from Entity. The physics engine sends collision callbacks which has an Entity* to the B that A collided on. Then, lets say A is a Bullet, A tries to cast the entity as a player, if it succeeds, it reduces the player's health. Is this a good design? The problem I have with a message system is that I'd need messages for everything, like: entity.sendMessage(SET_PLAYER_HEALTH,16); So that's why I think casting is cleaner.

  Read the article

• Arbitrary Rotation about a Sphere

  - by Der

  I'm coding a mechanic which allows a user to move around the surface of a sphere. The position on the sphere is currently stored as theta and phi, where theta is the angle between the z-axis and the xz projection of the current position (i.e. rotation about the y axis), and phi is the angle from the y-axis to the position. I explained that poorly, but it is essentially theta = yaw, phi = pitch Vector3 position = new Vector3(0,0,1); position.X = (float)Math.Sin(phi) * (float)Math.Sin(theta); position.Y = (float)Math.Sin(phi) * (float)Math.Cos(theta); position.Z = (float)Math.Cos(phi); position *= r; I believe this is accurate, however I could be wrong. I need to be able to move in an arbitrary pseudo two dimensional direction around the surface of a sphere at the origin of world space with radius r. For example, holding W should move around the sphere in an upwards direction relative to the orientation of the player. I believe I should be using a Quaternion to represent the position/orientation on the sphere, but I can't think of the correct way of doing it. Spherical geometry is not my strong suit. Essentially, I need to fill the following block: public void Move(Direction dir) { switch (dir) { case Direction.Left: // update quaternion to rotate left break; case Direction.Right: // update quaternion to rotate right break; case Direction.Up: // update quaternion to rotate upward break; case Direction.Down: // update quaternion to rotate downward break; } }

  Read the article

• Typical Method Of Building Puzzle Levels

  - by Josh Kahane

  Hi I am designing a puzzle game for the iphone and was wondering as most puzzle games consist of the player progressing through multiple levels. You see for example Angry Birds has over 100 levels. Once the basis of the game is made, how do developers typically go about building their levels? Do they generally build them from scratch each one more or less, or work of their own template or have some other method which they use to tailor these levels? I imagine building so many levels is a long process, certainly if building each one individually. Do they do this, or have a method which speeds it up once they have their basis? Thanks.

  Read the article

• Alpha blend 3D png texture in XNA

  - by ProgrammerAtWork

  I'm trying to draw a partly transparent texture a plane, but the problem is that it's incorrectly displaying what is behind that texture. Pseudo code: vertices1 basiceffect1 // The vertices of vertices1 are located BEHIND vertices2 vertices2 basiceffect2 // The vertices of vertices2 are located IN FRONT vertices1 GraphicsDevice.Clear(Blue); PrimitiveBatch.Begin(); //if I draw like this: PrimitiveBatch.Draw(vertices1, trianglestrip, basiceffect1) PrimitiveBatch.Draw(vertices2, trianglestrip, basiceffect2) //Everything gets draw correctly, I can see the texture of vertices2 trough //the transparent parts of vertices1 //but if I draw like this: PrimitiveBatch.Draw(vertices2, trianglestrip, basiceffect2) PrimitiveBatch.Draw(vertices1, trianglestrip, basiceffect1) //I cannot see the texture of vertices1 in behind the texture of vertices2 //Instead, the texture vertices2 gets drawn, and the transparent parts are blue //The clear color PrimitiveBatch.Draw(vertice PrimitiveBatch.End(); My question is, Why does the order in which I call draw matter?

  Read the article

• Load different levels in XML

  - by Anearion

  my question is more about a theoretical gener than a pratical way to make things happen. I'm about start developing a game for android, text based so i won't need sprites or animation, nor a game engine. Let's say is similar to a sudoku game, where each level is an harder version of sudoku and each level has some question to be asnwered over the sudoku itself. I was wondering if the better way is to have only one XML and then inside all the different levels, each one with his meta-tags, or if the different approach of making n xml files where each one is a level is preferred. At the moment a level should have those tags: <level> <question>Question_1</question> <hint1>what does it do?</hint1> <hint2>where...</hint2> .... <hintN>how...</hintN> </level> So each level could have some items to read and that's what made me think that maybe different files are better cuz if i have to load lvl 10 i can read only the 10.xml file. I hope my question isn't too stupind. Thanks in advance

  Read the article

• Creating blur with an alpha channel, incorrect inclusion of black

  - by edA-qa mort-ora-y

  I'm trying to do a blur on a texture with an alpha channel. Using a typical approach (two-pass, gaussian weighting) I end up with a very dark blur. The reason is because the blurring does not properly account for the alpha channel. It happily blurs in the invisible part of the image, whcih happens to be black, and thus results in a very dark blur. Is there a technique to blur that properly accounts for the alpha channel?

  Read the article

• Creating natural environments that can run on lower end computers in Unity3D/C#

  - by Timothy Williams

  So, I'm starting work on a project soon that will require me to create realistic environments that can preferably run on PC's besides high quality ones. The goal is to get as real an environment as possible while still being easy(ish) to run. The only problem is I've NEVER done anything with 3D environments, making trees sway, grass move, lighting, etc. Can anyone give me any help? Perhaps describe how it's done? Link me to articles? I'm just looking to be pointed in the right direction, not for you to write the code for me. Any help at all would be greatly appreciated, I'm using Unity3D and C# as my language. Thanks, Tim.

  Read the article

• SFML programs fails to debug with glslDevil

  - by Zhen

  I'm testing the glslDevil debugger with a simple (and working) SFML application in Linux + NVidia. But it always fails in the window creation step: W! Program Start | glXGetConfig(0x86a50b0, 0x86acef8, 4, 0xbf8228c4) | glXGetConfig(0x86a50b0, 0x86acef8, 5, 0xbf8228c8) | glXGetConfig(0x86a50b0, 0x86acef8, 8, 0xbf8228cc) | glXGetConfig(0x86a50b0, 0x86acef8, 9, 0xbf8228d0) | glXGetConfig(0x86a50b0, 0x86acef8, 10, 0xbf8228d4) | glXGetConfig(0x86a50b0, 0x86acef8, 11, 0xbf8228d8) | glXGetConfig(0x86a50b0, 0x86acef8, 12, 0xbf8228dc) | glXGetConfig(0x86a50b0, 0x86acef8, 13, 0xbf8228e0) | glXGetConfig(0x86a50b0, 0x86acef8, 100000, 0xbf8228e4) | glXGetConfig(0x86a50b0, 0x86acef8, 100001, 0xbf8228e8) | glXCreateContext(0x86a50b0, 0x86acef8, (nil), 1) E! Child process exited W! Program termination forced! And the code that fails: #include <SFML/Graphics.hpp> #define GL_GLEXT_PROTOTYPES 1 #define GL3_PROTOTYPES 1 #include <GL/gl.h> #include <GL/glu.h> #include <GL/glext.h> int main(){ sf::RenderWindow window{ sf::VideoMode(800, 600), "Test SFML+GL" }; bool running = true; while( running ){ sf::Event event; while( window.pollEvent(event) ){ if( event.type == sf::Event::Closed ){ running = false; }else if(event.type == sf::Event::Resized){ glViewport(0, 0, event.size.width, event.size.height); } } window.display(); } return 0; } Is It posible to solve this problem? or get around the problem to continue the gslsDevil use?.

  Read the article

• how to double buffer in multiple classes with java

  - by kdavis8

  I am creating a Java 2D video game. I can load graphics just fine, but when it gets into double buffering I have issues. My source code package myPackage; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Image; import java.awt.Toolkit; import java.awt.image.BufferStrategy; import java.awt.image.BufferedImage; import javax.swing.JFrame; public class GameView extends JFrame { private BufferedImage backbuffer; private Graphics2D g2d; public GameView() { setBounds(0, 0, 500, 500); setVisible(true); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); backbuffer = new BufferedImage(getHeight(), getWidth(), BufferedImage.TYPE_INT_BGR); g2d = backbuffer.createGraphics(); Toolkit tk = Toolkit.getDefaultToolkit(); Image img = tk.getImage(this.getClass().getResource("cage.png")); g2d.setColor(Color.red); //g2d.drawString("Hello",100,100); g2d.drawImage(img, 100, 100, this); repaint(); } public static void main(String args[]) { new GameView(); } public void paint(Graphics g) { g2d = (Graphics2D)g; g2d.drawImage(backbuffer, 0, 0, this); } }

  Read the article

< Previous Page | 378 379 380 381 382 383 384 385 386 387 388 389  | Next Page >