Search Results

Search found 12528 results on 502 pages for 'objects recognition'.

Page 389/502 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

  • New TPerlRegEx Compatible with Delphi XE

    - by Jan Goyvaerts
    The new RegularExpressionsCore unit in Delphi XE is based on the PerlRegEx unit that I wrote many years ago. Since I donated full rights to a copy rather than full rights to the original, I can continue to make my version of TPerlRegEx available to people using older versions of Delphi. I did make a few changes to the code to modernize it a bit prior to donating a copy to Embarcadero. The latest TPerlRegEx includes those changes. This allows you to use the same regex-based code using the RegularExpressionsCore unit in Delphi XE, and the PerlRegEx unit in Delphi 2010 and earlier. If you’re writing new code using regular expressions in Delphi 2010 or earlier, I strongly recomment you use the new version of my PerlRegEx unit. If you later migrate your code to Delphi XE, all you have to do is replace PerlRegEx with RegularExrpessionsCore in the uses clause of your units. If you have code written using an older version of TPerlRegEx that you want to migrate to the latest TPerlRegEx, you’ll need to take a few changes into account. The original TPerlRegEx was developed when Borland’s goal was to have a component for everything on the component palette. So the old TPerlRegEx derives from TComponent, allowing you to put it on the component palette and drop it on a form. The new TPerlRegEx derives from TObject. It can only be instantiated at runtime. If you want to migrate from an older version of TPerlRegEx to the latest TPerlRegEx, start with removing any TPerlRegEx components you may have placed on forms or data modules and instantiate the objects at runtime instead. When instantiating at runtime, you no longer need to pass an owner component to the Create() constructor. Simply remove the parameter. Some of the property and method names in the original TPerlRegEx were a bit unwieldy. These have been renamed in the latest TPerlRegEx. Essentially, in all identifiers SubExpression was replaced with Group and MatchedExpression was replaced with Matched. Here is a complete list of the changed identifiers: Old Identifier New Identifier StoreSubExpression StoreGroups NamedSubExpression NamedGroup MatchedExpression MatchedText MatchedExpressionLength MatchedLength MatchedExpressionOffset MatchedOffset SubExpressionCount GroupCount SubExpressions Groups SubExpressionLengths GroupLengths SubExpressionOffsets GroupOffsets Download TPerlRegEx. Source is included under the MPL 1.1 license.

    Read the article

  • CodePlex Daily Summary for Saturday, October 19, 2013

    CodePlex Daily Summary for Saturday, October 19, 2013Popular ReleasesMedia Companion: Media Companion MC3.583b: As before release but fixed for no movie poster sourcesNew* Both - Added 'An' as option to ignore in title * Movie - Renaming - added %Z - Sorttitle to Legend * Movie - Renaming - added %O - Audio Channels to Legend * Movie - Remove a poster source from priority list. Reset List back to defaults. * Made Media Companion truly portable application. Fixed* Movie - browse for Poster Or Fanart, allows for jpg, tbn, png and bmp images * Movie - Alt Fanart Browser - Url or Browse window now fully...MoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...patterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.SQL Power Doc: Version 1.0.2.1: Misc. bug fixes Added logic to resolve members of a Windows Group server login Added columns to Excel workbooks to show definitions for server permissions, server roles, database permissions, and database rolesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyDotNetNuke® Wiki: 05.00.00: Changes made to better support upgrades and the removal of deprecated legacy files that were causing formatting issues. Updated the Version number to better indicate the significance of the C# migration and the new DNN 7.0.2 minimum requirement.TerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...C# Intellisense for Notepad++: Release v.1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.Collection Commander for Configuration Manager 2012: CMCollCtr 1.0.0: Change log: - MSI Setup - UI Improved - CM12 Console integration - New Powershell code snippets - Client Center IntegrationLINQ to Twitter: LINQ to Twitter v2.1.09: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Sandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...C++ REST SDK (codename "Casablanca"): C++ REST SDK 1.3.0: This release fixes multiple customer reported issues as well as the following: Full support for Dev12 binaries and project files Full support for Windows XP New sample highlighting the Client and Server APIs : BlackJack Expose underlying native handle to set custom options on http_client Improvements to Listener Library Note: Dev10 binaries have been dropped as of this release, however the Dev10 project files are still available in the Source CodeAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...ASP.net MVC Awesome - jQuery Ajax Helpers: 3.5.2: version 3.5.2 - fix for setting single value to multivalue controls - datepicker min max date offset fix - html encoding for keys fix - enable Column.ClientFormatFunc to be a function call that will return a function version 3.5.1 - fixed html attributes rendering - fixed loading animation rendering - css improvements version 3.5 ========================== - autosize for all popups ( can be turned off by calling in js awe.autoSize = false ) - added Parent, Paremeter extensions ...New Projectsag2: ag2ApplicationMobile: ApplicationMobileBing Maps/Geolocalization Windows Store Template: Template de aplicativo para Windows 8 utilizando APIs do Bing Maps e Geolocalização. C3D.NET: C3D.NET is a free class library for manipulating C3D file. This project supports .NET 2.0 and .NET 4.0, and provides a free Data Viewer based on this library.DrinksMachineCMC: DrinksMachineCMCFerdeenFatalSpeech: Speech recognition for PC control.FuzzyLogic: FuzzyLogic Demohousekeeping: ?????isolutions Techdays 2013: Zeigt die Möglichkeit des Zugriffes auf ein CRM 2013 Online mit einer Windows Store App und aus einem Word Plugin.Learn .NET Gadgeteer: .NET Gadgeteer example projects using the FEZ Cerberus kit from GHILIT.Logger.ServerChecker: Small application for server monitoring, which demonstrates capabilities of LIT.Logger (www.litlogger.com)LuaTools for Visual Studio: luatools lua visual studioMTM Test Plan Viewer: A UI tool that lets you easily view, explore and export MTM test results.NetworkScan: Network scan windowsObservable Linq: Observable Linq and Observable Expressions is about to change the paradigm how to use expressions and Linq, providing update events whenever the results change.PatientManagement: beep beeppescar-shop-El-enchufe-khristo-grecia-giselle: falta la aplicacion de LINQ...ProjetoEscola: Projeto Integrado Senac Proyecto Librería PRISA: Este sistema servirá para controlar las compras, ventas y almacén de librería "PRISA". Se desarrollará en Visual Studio 2012 con patrón MVC y en base a capas.TDataBase: Simple db query libraryzongtest: test

    Read the article

  • Coordinate based travel through multi-line path over elapsed time

    - by Chris
    I have implemented A* Path finding to decide the course of a sprite through multiple waypoints. I have done this for point A to point B locations but am having trouble with multiple waypoints, because on slower devices when the FPS slows and the sprite travels PAST a waypoint I am lost as to the math to switch directions at the proper place. EDIT: To clarify my path finding code is separate in a game thread, this onUpdate method lives in a sprite like class which happens in the UI thread for sprite updating. To be even more clear the path is only updated when objects block the map, at any given point the current path could change but that should not affect the design of the algorithm if I am not mistaken. I do believe all components involved are well designed and accurate, aside from this piece :- ) Here is the scenario: public void onUpdate(float pSecondsElapsed) { // this could be 4x speed, so on slow devices the travel moved between // frames could be very large. What happens with my original algorithm // is it will start actually doing circles around the next waypoint.. pSecondsElapsed *= SomeSpeedModificationValue; final int spriteCurrentX = this.getX(); final int spriteCurrentY = this.getY(); // getCoords contains a large array of the coordinates to each waypoint. // A waypoint is a destination on the map, defined by tile column/row. The // path finder converts these waypoints to X,Y coords. // // I.E: // Given a set of waypoints of 0,0 to 12,23 to 23, 0 on a 23x23 tile map, each tile // being 32x32 pixels. This would translate in the path finder to this: // -> 0,0 to 12,23 // Coord : x=16 y=16 // Coord : x=16 y=48 // Coord : x=16 y=80 // ... // Coord : x=336 y=688 // Coord : x=336 y=720 // Coord : x=368 y=720 // // -> 12,23 to 23,0 -NOTE This direction change gives me trouble specifically // Coord : x=400 y=752 // Coord : x=400 y=720 // Coord : x=400 y=688 // ... // Coord : x=688 y=16 // Coord : x=688 y=0 // Coord : x=720 y=0 // // The current update index, the index specifies the coordinate that you see above // I.E. final int[] coords = getCoords( 2 ); -> x=16 y=80 final int[] coords = getCoords( ... ); // now I have the coords, how do I detect where to set the position? The tricky part // for me is when a direction changes, how do I calculate based on the elapsed time // how far to go up the new direction... I just can't wrap my head around this. this.setPosition(newX, newY); }

    Read the article

  • OK - What now? How do we become a Social Business?

    - by Michael Snow
    We hope that those of you that attended yesterday's Webcast with Brian Solis enjoyed Brian's discussion with Christian Finn for our last Webcast of the season for the Oracle Social Business Thought Leaders Series.  For those of you that may have missed the webcast or were stuck at a company holiday party - you'll be glad to hear that the webcast will be available On-Demand starting later today (12/14/12). And any of you who'd like to listen to a quick but informative podcast with Brian - can listen to that here. Some of you may still be left with questions about how to get from point A to point B and even more confused than when you started thinking about this new world of Digital Darwinism. The post below, grabbed from an abundance of great thought leadership prose on Brian's blog may help you frame the path you need to start walking sooner versus later to stay off of the endangered species list.  As you explore your path forward, please keep Oracle in mind - we do offer a wide range of solutions to help your organization 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} optimize the engagement for your customers, employees and partners. The Path from a Social Brand to a Social Business Brian Solis Originally posted May 2, 2012 I’ve been a long-time supporter of MediaTemple’s (MT)Residence program along with Gary Vaynerchuk, Neil Patel, and many others whom I respect. I wanted to share my “7 questions to answer to become a social business” with you here.. Social Media is pervasive and is becoming the new normal in corporate marketing. Brands who get this right are starting to build their own media networks rich with customer connections numbering in the millions. Right now, Coca-Cola has over 34 million fans on Facebook, but they’re hardly alone. Disney follows just behind with 29 million fans, Starbucks boasts 25 million, and Oreo, Red Bull, and Converse play host to over 20 million fans. If we were to look at other networks such as Twitter and Youtube, we would see a recurring theme. People are connecting en masse with the businesses they support and new media represents the ability to cultivate consumer relationships in ways not possible with traditional earned or paid media. Sounds great right? This might sound abrupt, but the truth is that we’re hardly realizing the potential of what lies before us. Everything begins with understanding not just how other brands are marketing themselves in social media, but also seeing what they’re not doing and envisioning what’s possible. We’re already approaching the first of many crossroads that new media will present. Do we take the path of a social brand or that of a social business? What’s the difference? A social brand is just that, a business that is remodeling or retrofitting its existing marketing practices to new media. A social business is something altogether different as it embraces introspection and extrospection to reevaluate internal and external processes, systems, and opportunities to transform into a living, breathing entity that adapts to market conditions and opportunities. It’s a tough decision to make right now especially at a time when all we read about is how much success many businesses are finding without having to answer this very question. With all of the newfound success in social networks, the truth is that we’re only just beginning to learn what’s possible and that’s where you come in. When compared to the investment in time and resources across the board, social media represents only a small part of the mix. But with your help, that’s all about to change. The CMO Survey, an organization that disseminates the opinions of top marketers in order to predict the future of markets, recently published a report that gave credence to the fact that social media is taking off. One of the most profound takeaways from the report was this gem; “The “like button” [in Facebook] packs more customer-acquisition punch than other demand-generating activities.” With insights like this, it’s easy to see why the race to social is becoming heated. The report also highlighted exactly where social fits in the marketing mix today and as you can see, despite all of the hype, it’s not a dominant focus yet. As of August 2011, the percentage of overall marketing budgets dedicated to social media hovered at around 7%. However, in 2012 the investment in social media will climb to 10%. And, in five years, social media is expected to represent almost 18% of the total marketing budget. Think about that for a moment. In 2016, social media will only represent 18%? Queue the sound of a record scratching here. With businesses finding success in social networks, why are businesses failing to realize the true opportunity brought forth by the ability to listen to, connect with, and engage with customers? While there’s value in earning views, driving traffic, and building connections through the 3F’s (friends, fans and followers), success isn’t just defined simply by what really amounts to low-hanging fruit. The truth is that businesses cannot measure what it is they don’t know to value. As a result, innovation in new engagement initiatives is stifled because we’re applying dated or inflexible frameworks to new paradigms. Social media isn’t owned by marketing, but instead the entire organization. This changes everything and makes your role so much more important. It’s up to you to learn how to think outside of the proverbial social media box to see what others don’t, the ability to improve customers experiences through the evolution of a social brand into a social business. Doing so will translate customer insights from what they do and don’t share in social networks into better products, services, and processes. See, customers want something more from their favorite businesses than creative campaigns, viral content, and everyday dialogue in social networks. Customers want to be heard and they want to know that you’re listening. How businesses use social media must remind them that they’re more than just an audience, consumer, or a conduit to “trigger” a desired social effect. Herein lies both the challenge and opportunity of social media. It’s bigger than marketing. It’s also bigger than customer service. It’s about building relationships with customers that improve experiences and more importantly, teaches businesses how to re-imagine products and internal processes to better adapt to potential crises and seize new opportunities. When it comes down to it, Twitter, Facebook, Youtube, Foursquare, are all channels for listening, learning, and engaging. It’s what you do within each channel that builds a community around your brand. And, at the end of the day, the value of the community you build counts for everything. It’s important to understand that we cannot assume that these networks simply exist for people to lineup for our marketing messages or promotional campaigns. Nor can we assume that they’re reeling in anticipation for simple dialogue. They want value. They want recognition. They want access to exclusive information and offers. They need direction, answers and resolution. What we’re talking about here is the multidimensional makeup of consumers and how a one-sided approach to social media forces the needs for social media to expand beyond traditional marketing to socialize the various departments, lines of business, and functions to engage based on the nature of the situation or opportunity. In the same CMO study, it was revealed that marketers believe that social media has a long way to go toward integrating into the overall company strategy. On a scale of 1-7, with one being “not integrated at all” and seven being “very integrated,” 22% chose “one.” Critical functions such as service, HR, sales, R&D, product marketing and development, IR, CSR, etc. are either not engaged or are operating social media within a silo disconnected from other efforts or possibilities. The problem is that customers don’t view a company by silo, instead they see one company, one brand, and their experience in social media forms an impression that eventually contributes to their view of your brand. The first step here is to understand business priorities and objectives to assess how social media can be additive in achieving these goals. Additionally, surveying the landscape to determine other areas of interest as its specifically related to your business. • Are customers seeking help or direction? • Who are your most valuable customers and what are they sharing? • How can you use social media to acquire and retain customers? - What ideas are circulating and how can you harness user generated activity and content to innovate or adapt to better meet the needs of customers? - How can you broaden a single customer view to recognize the varying needs of customers and how your organization can organize around each circumstance? - What insights exist based on how consumers are interacting with one another? How can this intelligence inform marketing, service, products and other important business initiatives? - How can your business extend their current efforts to deliver better customer experiences and in turn more effectively unit internal collaboration and communication? Customer demands far exceed the capabilities of the marketing department. While creating a social brand is a necessary endeavor, building a social business is an investment in customer relevance now and over time. Beyond relevance, a social business fosters a culture of change that unites employees and customers and sets a foundation for meaningful and beneficial relationships. Innovation, communication, and creativity are the natural byproducts of engagement and transformation. As a social brand, we are competing for the moment. As a social business, we are competing the future in all that we do today.

    Read the article

  • Liskov principle: violation by type-hinting

    - by Elias Van Ootegem
    According to the Liskov principle, a construction like the one below is invalid, as it strengthens a pre-condition. I know the example is pointless/nonsense, but when I last asked a question like this, and used a more elaborate code sample, it seemed to distract people too much from the actual question. //Data models abstract class Argument { protected $value = null; public function getValue() { return $this->value; } abstract public function setValue($val); } class Numeric extends Argument { public function setValue($val) { $this->value = $val + 0;//coerce to number return $this; } } //used here: abstract class Output { public function printValue(Argument $arg) { echo $this->format($arg); return $this; } abstract public function format(Argument $arg); } class OutputNumeric extends Output { public function format(Numeric $arg)//<-- VIOLATION! { $format = is_float($arg->getValue()) ? '%.3f' : '%d'; return sprintf($format, $arg->getValue()); } } My question is this: Why would this kind of "violation" be considered harmful? So much so that some languages, like the one I used in this example (PHP), don't even allow this? I'm not allowed to strengthen the type-hint of an abstract method but, by overriding the printValue method, I am allowed to write: class OutputNumeric extends Output { final public function printValue(Numeric $arg) { echo $this->format($arg); } public function format(Argument $arg) { $format = is_float($arg->getValue()) ? '%.3f' : '%d'; return sprintf($format, $arg->getValue()); } } But this would imply repeating myself for each and every child of Output, and makes my objects harder to reuse. I understand why the Liskov principle exists, don't get me wrong, but I find it somewhat difficult to fathom why the signature of an abstract method in an abstract class has to be adhered to so much stricter than a non-abstract method. Could someone explain to me why I'm not allowed to hind at a child class, in a child class? The way I see it, the child class OutputNumeric is a specific use-case of Output, and thus might need a specific instance of Argument, namely Numeric. Is it really so wrong of me to write code like this?

    Read the article

  • Why CoffeeScript is tough to maintain

    - by Renso
    I recently started trying out CoffeeScript only to find out that it caused more headaches. The abstraction level of jQuery was perfect, it did not dictate to coders how to design their code, it just works. However, I recently posted a request to the CoffeeScript team to consider introducing curly braces to help with more complex code to control the flow of logic. For example a if-then-else with many nested levels can be near impossible to debug without tracing through it when using CoffeeScript. Also with IDEs like Visual Studio, regular JavaScript intellicense and auto-formatting make it easy to appropriate indent nested levels without any work on the part of the developer and reading it is not that hard, especially with some extensions that show vertical lines in the code editor to help see what is nested within what part of the code.However with CoffeeScript that is not the case. The samples given in the CoffeeScript web site are of course just simple examples to explain the features and one gets excited pretty quick over the powerful shortcuts. I tried to convert a piece of JavaScript over to CoffeeScript and gave up since you need to first of all remove ALL non CoffeeScript coding constructs for it to even compile. However js2coffee can help with that. However to keep track of nested levels became something that was simply not manageable using CoffeeScript.Furthermore, any coding language that controls the flow of logic by indentation is extremely dangerous for obvious reasons. I liked CoffeeScript a lot, but the fact that the logical flow of the code is controlled by how much you indent code, spaces or tabs, is not reliable as there is no way the programmer has an easy way of knowing what parts of the code will get hit when the code spans a page.When I suggested introducing curly braces in CoffeeScript the team, one contributor advised me that my code needs to be re-designed! Needless to say that is absurd. When I included a piece of the code he asked my if it was legacy code. It's like saying to a Java programmer, sorry you cannot use Java because we don't agree with how you write your code.jashkenas from the CoffeeScript blog gave some great suggestions and made the point that introducing curly braces would be very problematic for them as they use them to denote objects. Makes sense, but I would still love to see some way to replace code flow control with spaces and indentation to something more concrete and human readable.

    Read the article

  • A Facelift for Fusion

    - by Richard Lefebvre
    It's simple. It's modern. It was the buzz at OpenWorld in San Francisco. See what the UX team has been up to and what customers are going to love. At OpenWorld 2012, the Oracle Applications User Experience (UX) team unveiled the new face of Fusion Applications. You might have seen it in sessions presented by Chris Leone, Anthony Lye, Jeremy Ashley and others or you may have gotten a look on the demogrounds. Why are we delivering a new face for Fusion Applications? "Because," says Ashley, vice president of the Oracle Applications User Experience team, "we want to provide a simple, modern, productive way for users to complete their top quick-entry tasks. The idea is to provide a clear, productive user experience that is backed by the full functionality of Fusion Applications." The first release of the new face of Fusion focuses on three types of users. It provides a fully functional gateway to Fusion Applications for: ·         New and casual users who need quick access to self-service tasks ·         Professional users who need fast access to quick-entry, high-volume tasks ·         Users who are looking for a way to quickly brand their portal for employees The new face of Fusion allows users to move easily from navigation to action, Ashley said, and it has been designed for any device -- Mac, PC, iPad, Android, SmartBoard -- in the browser. How Did We Build It? The new face of Fusion essentially is a custom shell, developed by the Apps UX team, and a set of page templates that embodies a simple design aesthetic. It's repeatable, providing consistency across its pages, and the need for training is little to zero. More specifically, the new face of Fusion has been built on ADF. The Applications UX team created pages in JDeveloper using local tasks flows bound to existing view objects. Three new components were commissioned from ADF and existing Fusion components were re-skinned to deliver a simple, modern user experience. It really is that simple - and to prove that point, we've been sharing our new face of Fusion story on several Oracle channels such as this one. If you want to learn more, check OpenWorld presentation on the Fusion Learning Center.

    Read the article

  • Software Architecture and MEF composition location

    - by Leonardo
    Introduction My software (a bunch of webapi's) consist of 4 projects: Core, FrontWebApi, Library and Administration. Library is a code library project that consists of only interfaces and enumerators. All my classes in other projects inherit from at least one interface, and this interface is in the library. Generally speaking, my interfaces define either Entities, Repositories or Controllers. This project references no other project or any special dlls... just the regular .Net stuff... Core is a class-library project where concrete implementation of Entities and Repositories. In some cases i have more than 1 implementation for a Repository (ex: one for azure table storage and one for regular Sql). This project handles the intelligence (business rules mostly) and persistence, and it references only the Library. FrontWebApi is a ASP.NET MVC 4 WebApi project that implements the controllers interfaces to handle web-requests (from a mobile native app)... It references the Core and the Library. Administration is a code-library project that represents a "optional-module", meaning: if it is present, it provides extra-features (such as Access Control Lists) to the application, but if its not, no problem. Administration is also only referencing the Library and implementing concrete classes of a few interfaces such as "IAccessControlEntry"... I intend to make this available with a "setup" that will create any required database table or anything like that. But it is important to notice that the Core has no reference to this project... Development Now, in order to have a decoupled code I decide to use IoC and because this is a small project, I decided to do it using MEF, specially because of its advertised "composition" capabilities. I arranged all the imports/exports and constructors and everything, but something is quite not perfect in my "mental-visualisation": Main Question Where should I "Compose" the objects? I mean: Technically, the only place where real implementation access is required is in the Repositories, because in order to retrieve data from wherever, entities instances will be necessary, and in all other places. The repositories could also provide a public "GetCleanInstanceOf()" right? Then all other places will be just fine working with the interfaces instead of concrete classes... Secondary Question Should "Administration" implement the concrete object for "IAccessControlGeneralRepository" or the Core should?

    Read the article

  • Android Swipe In Unity 3D World with AR

    - by Christian
    I am working on an AR application using Unity3D and the Vuforia SDK for Android. The way the application works is a when the designated image(a frame marker in our case) is recognized by the camera, a 3D island is rendered at that spot. Currently I am able to detect when/which objects are touched on the model by raycasting. I also am able to successfully detect a swipe using this code: if (Input.touchCount > 0) { Touch touch = Input.touches[0]; switch (touch.phase) { case TouchPhase.Began: couldBeSwipe = true; startPos = touch.position; startTime = Time.time; break; case TouchPhase.Moved: if (Mathf.Abs(touch.position.y - startPos.y) > comfortZoneY) { couldBeSwipe = false; } //track points here for raycast if it is swipe break; case TouchPhase.Stationary: couldBeSwipe = false; break; case TouchPhase.Ended: float swipeTime = Time.time - startTime; float swipeDist = (touch.position - startPos).magnitude; if (couldBeSwipe && (swipeTime < maxSwipeTime) && (swipeDist > minSwipeDist)) { // It's a swiiiiiiiiiiiipe! float swipeDirection = Mathf.Sign(touch.position.y - startPos.y); // Do something here in reaction to the swipe. swipeCounter.IncrementCounter(); } break; } touchInfo.SetTouchInfo (Time.time-startTime,(touch.position-startPos).magnitude,Mathf.Abs (touch.position.y-startPos.y)); } Thanks to andeeeee for the logic. But I want to have some interaction in the 3D world based on the swipe on the screen. I.E. If the user swipes over unoccluded enemies, they die. My first thought was to track all the points in the moved TouchPhase, and then if it is a swipe raycast into all those points and kill any enemy that is hit. Is there a better way to do this? What is the best approach? Thanks for the help!

    Read the article

  • Book review: Peopleware: Productive Projects and Teams

    - by DigiMortal
       Peopleware by Tom DeMarco and Timothy Lister is golden classic book that can be considered as mandatory reading for software project managers, team leads, higher level management and board members of software companies. If you make decisions about people then you cannot miss this book. If you are already good on managing developers then this book can make you even better – you will learn new stuff about successful development teams for sure. Why peopleware? Peopleware gives you very good hints about how to build up working environment for project teams where people can really do their work. Book also covers team building topics that are also important reading. As software developer I found practically all points in this book to be accurate and valid. Many times I have found my self thinking about same things and Peopleware made me more confident about my opinions. Peopleware covers also time management and planning topics that help you do way better job on using developers time effectively by minimizing the amount of interruptions by phone calls, pointless meetings and i-want-to-know-what-are-you-doing-right-now questions by managers who doesn’t write code anyway. I think if you follow suggestions given by Peopleware your developers are very happy. I suggest you to also read another great book – Death March by Edward Yourdon. Death March describes you effectively what happens when good advices given by Peopleware are totally ignored or worse yet – people are treated exactly opposite way. I consider also Death March as golden classics and I strongly recommend you to read this book too. Table of Contents Acknowledgments Preface to the Second Edition Preface to the First Edition Part 1: Managing the Human Resource Chapter 1: Somewhere Today, a Project Is Failing Chapter 2: Make a Cheeseburger, Sell a Cheeseburger Chapter 3: Vienna Waits for You Chapter 4: Quality-If Time Permits Chapter 5: Parkinson's Law Revisited Chapter 6: Laetrile Part II: The Office Environment Chapter 7: The Furniture Police Chapter 8: "You Never Get Anything Done Around Here Between 9 and 5" Chapter 9: Saving Money on Space Intermezzo: Productivity Measurement and Unidentified Flying Objects Chapter 10: Brain Time Versus Body Time Chapter 11: The Telephone Chapter 12: Bring Back the Door Chapter 13: Taking Umbrella Steps Part III: The Right People Chapter 14: The Hornblower Factor Chapter 15: Hiring a Juggler Chapter 16: Happy to Be Here Chapter 17: The Self-Healing System Part IV: Growing Productive Teams Chapter 18: The Whole Is Greater Than the Sum of the Parts Chapter 19: The Black Team Chapter 20: Teamicide Chapter 21: A Spaghetti Dinner Chapter 22: Open Kimono Chapter 23: Chemistry for Team Formation Part V: It't Supposed to Be Fun to Work Here Chapter 24: Chaos and Order Chapter 25: Free Electrons Chapter 26: Holgar Dansk Part VI: Son of Peopleware Chapter 27: Teamicide, Revisited Chapter 28: Competition Chapter 29: Process Improvement Programs Chapter 30: Making Change Possible Chapter 31: Human Capital Chapter 32:Organizational Learning Chapter 33: The Ultimate Management Sin Is Chapter 34: The Making of Community Notes Bibliography Index About the Authors

    Read the article

  • Questions about game states

    - by MrPlow
    I'm trying to make a framework for a game I've wanted to do for quite a while. The first thing that I decided to implement was a state system for game states. When my "original" idea of having a doubly linked list of game states failed I found This blog and liked the idea of a stack based game state manager. However there were a few things I found weird: Instead of RAII two class methods are used to initialize and destroy the state Every game state class is a singleton(and singletons are bad aren't they?) Every GameState object is static So I took the idea and altered a few things and got this: GameState.h class GameState { private: bool m_paused; protected: StateManager& m_manager; public: GameState(StateManager& manager) : m_manager(manager), m_paused(false){} virtual ~GameState() {} virtual void update() = 0; virtual void draw() = 0; virtual void handleEvents() = 0; void pause() { m_paused = true; } void resume() { m_paused = false; } void changeState(std::unique_ptr<GameState> state) { m_manager.changeState(std::move(state)); } }; StateManager.h class GameState; class StateManager { private: std::vector< std::unique_ptr<GameState> > m_gameStates; public: StateManager(); void changeState(std::unique_ptr<GameState> state); void StateManager::pushState(std::unique_ptr<GameState> state); void popState(); void update(); void draw(); void handleEvents(); }; StateManager.cpp StateManager::StateManager() {} void StateManager::changeState( std::unique_ptr<GameState> state ) { if(!m_gameStates.empty()) { m_gameStates.pop_back(); } m_gameStates.push_back( std::move(state) ); } void StateManager::pushState(std::unique_ptr<GameState> state) { if(!m_gameStates.empty()) { m_gameStates.back()->pause(); } m_gameStates.push_back( std::move(state) ); } void StateManager::popState() { if(!m_gameStates.empty()) m_gameStates.pop_back(); } void StateManager::update() { if(!m_gameStates.empty()) m_gameStates.back()->update(); } void StateManager::draw() { if(!m_gameStates.empty()) m_gameStates.back()->draw(); } void StateManager::handleEvents() { if(!m_gameStates.empty()) m_gameStates.back()->handleEvents(); } And it's used like this: main.cpp StateManager states; states.changeState( std::unique_ptr<GameState>(new GameStateIntro(states)) ); while(gamewindow::gameWindow.isOpen()) { states.handleEvents(); states.update(); states.draw(); } Constructors/Destructors are used to create/destroy states instead of specialized class methods, state objects are no longer static but

    Read the article

  • Asynchronously returning a hierarchal data using .NET TPL... what should my return object "look" like?

    - by makerofthings7
    I want to use the .NET TPL to asynchronously do a DIR /S and search each subdirectory on a hard drive, and want to search for a word in each file... what should my API look like? In this scenario I know that each sub directory will have 0..10000 files or 0...10000 directories. I know the tree is unbalanced and want to return data (in relation to its position in the hierarchy) as soon as it's available. I am interested in getting data as quickly as possible, but also want to update that result if "better" data is found (better means closer to the root of c:) I may also be interested in finding all matches in relation to its position in the hierarchy. (akin to a report) Question: How should I return data to my caller? My first guess is that I think I need a shared object that will maintain the current "status" of the traversal (started | notstarted | complete ) , and might base it on the System.Collections.Concurrent. Another idea that I'm considering is the consumer/producer pattern (which ConcurrentCollections can handle) however I'm not sure what the objects "look" like. Optional Logical Constraint: The API doesn't have to address this, but in my "real world" design, if a directory has files, then only one file will ever contain the word I'm looking for.  If someone were to literally do a DIR /S as described above then they would need to account for more than one matching file per subdirectory. More information : I'm using Azure Tables to store a hierarchy of data using these TPL extension methods. A "node" is a table. Not only does each node in the hierarchy have a relation to any number of nodes, but it's possible for each node to have a reciprocal link back to any other node. This may have issues with recursion but I'm addressing that with a shared object in my recursion loop. Note that each "node" also has the ability to store local data unique to that node. It is this information that I'm searching for. In other words, I'm searching for a specific fixed RowKey in a hierarchy of nodes. When I search for the fixed RowKey in the hierarchy I'm interested in getting the results FAST (first node found) but prefer data that is "closer" to the starting point of the hierarchy. Since many nodes may have the particular RowKey I'm interested in, sometimes I may want to get a report of ALL the nodes that contain this RowKey.

    Read the article

  • Upgarde from Asp.Net MVC 1 to MVC 2 - how to and issues with JsonRequestBehavior

    - by Renso
    Goal Upgrade your MVC 1 app to MVC 2 Issues You may get errors about your Json data being returned via a GET request violating security principles - we also address this here. This post is not intended to delve into why the Json GET request is or may be an issue, just how to resolve it as part of upgrading from MVC1 to 2. Solution First remove all references from your projects to the MVC 1 dll and replace it with the MVC 2 dll. Now update your web.config file in your web app root folder by simply changing references to assembly="System.Web.Mvc, Version 1.0.0.0 to Version 2.0.0.0, there are a couple of references in your config file, here are probably most of them you may have:         <compilation debug="true" defaultLanguage="c#">             <assemblies>                        <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />             </assemblies>         </compilation>           <pages masterPageFile="~/Views/Masters/CRMTemplate.master" pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validateRequest="False">             <controls>                 <add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />   Secondly, if you return Json objects from an ajax call via the GET method you ahve several options to fix this depending on your situation: 1. The simplest, as in my case I did this for an internal web app, you may simply do:             return Json(myObject, JsonRequestBehavior.AllowGet);   2. In Mvc if you have a controller base you could wrap the Json method with:         public new JsonResult Json(object data)         {             return Json(data, "application/json", JsonRequestBehavior.AllowGet);                    }   3. The most work would be to decorate your Actions with:         [AcceptVerbs(HttpVerbs.Get)]   4. Another tnat is also a lot of work that needs to be done to every ajax call returning Json is:                             msg = $.ajax({ url: $('#ajaxGetSampleUrl').val(), dataType: 'json', type: 'POST', async: false, data: { name: theClass }, success: function(data, result) { if (!result) alert('Failure to retrieve the Sample Data.'); } }).responseText;   This should cover all the issues you may run into when upgrading. Let me kow if you run into any other ones.

    Read the article

  • OWB 11gR2 &ndash; OMB and File Editing

    - by David Allan
    Here we will see how we can use the IDE for editing OMB scripts. The 11gR2 release is based on the common Oracle platform IDE used also by JDeveloper. It comes with a bunch of standard behavior for editing and rendering code. One of the lesser known things is that if you drop a text file into OWB you can edit it. So you can drop your tcl scripts right into OWB and edit in-place, and don’t need another IDE like Eclipse just for this task. Cool, so you have the file here. There may be no line numbers, you can toggle line numbers on by right clicking in the gutter. If we edit the file within the OWB IDE, the save is a little different from normal. OWB doesn’t normally manipulate files so things like ctrl-s to save, saves the OWB objects, but if you edit a file the closing of the file will ask if you want to save it – check it out. Now we enter the realm of ‘he who dares’…. Note the IDE doesn’t know about tcl files out of the box, so you see above there is no syntax highlighting. The code is identified by the extension… .java is java, .html is HTML etc. With OWB, the OMB scripts are tcl, we usually have .tcl extension on these files. One of the things we can do to trick up the syntax highlighting is to simply rename the file to have a .java suffix, then all of a sudden we get syntax highlighting, see the illustration here where side by side we see a the file with a .java extension and a .tcl extension. Not ideal pretending to be .java but gets us a way to having something more useful than notepad. We can then change the syntax highlighting such that we get Eclipse like highlighting within the IDE from the Tools Preferences option; You then get the Eclipse like rendering albeit using a little tweak on the file names… Might be useful if you are doing any kind of heavy duty OMB script development and just want a single IDE. The OMBPlus panel is then at hand for executing and testing it out.

    Read the article

  • CodePlex Daily Summary for Friday, October 19, 2012

    CodePlex Daily Summary for Friday, October 19, 2012Popular ReleasesOrchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...TFS 2012 Server/service Setup for Demo: TfsDemo_1.0.0.2: Release 1.0.0.2 New Stuff Feature 1 - Now add team favorite queries using the Tfs demo setup application. Simply specify the name of the work item query in the demoConfig.xml file and let the application work its magic. Feature 2 - Exclude the sections you do not want to be run as part of the demo. Mark the sections you don't want to run during the demo with the attribute Run="false" in the demoConfig.xml. Bug Fix 1 - If the DemoConfig.xml contains users or email addresses in work item a...XamlImageConverter: Xaml Image Converter 3.2: VisualStudio Integration Installer is now a VSIX Extension.Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...WPUtils: WPUtils 1.3: Blend SDK for Silverlight provides a HyperlinkAction which is missing in Blend SDK for Windows Phone. This release adds such an action which makes use of WebBrowserTask to show web page. You can also bind the hyperlink to your view model. NOTE: Windows Phone SDK 7.1 or higher is required.Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.NDatabase - C# Lightweight Object Database: NDatabase 2.0.1 Release: This release contains stable version of NDatabase C# Lightweight Object Database Content: binaries (dll + pdb) sources (sources, unit tests, samples) Changes: namespaces, dll name both are changed to NDatabase2 query API is changed. Now it is using generics in every possible place changing the way, how fields from class are stored - for now they are ordered by name which allows db on working well even if someone will change the order of fields in class definition (BREAKING CHANGE) A...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...New Projects7COM0207 DIY Wedding Cake: DIY Wedding Cake SiteAnt: AntCms.ArduUtilityLibrary for Arduino: ArduUtilityLibrary (AUL) is a library to assist the development of Arduino based programsbelloscoursework: Coursework to create a a web 2.0 website that support content creation.Code Jumper: Code-Jumper allows you to navigate your code by displaying a map of your declarations on the side panel of your editor. Dean's Web Scripting & Content Creation Project: Web Scripting & Content Creation Project for MSc Computer Science at Herts University.Distributed System for Medical Providers: This is a draft circulated for medical supplies providerDockPanel Suite VS2012 Look: Dock Panel Suite Control C# Visual Studio 2012 Design LookEntity Framework Json Serializer: Solve the Circular Reference problem when using Entity Framework with Asp.NET MVC JsonResult.ExpressGrid: A javascript gridFimClient: Our library - Predica.FimCommunication - for talking to FIM (Forefront Identity Manager) web servicesGetDev.NET - Mvc Talk: Sample code for local user group talk about ASP.NET MVCHelp Desk: Sistema para teste do mvc 3HospitalManagementSystem: Summary This system is for -handle channeling -handle lab reportsjQuery Filedrop: In this demo I will demonstrate using HTML5 compatible browsers to drag and drop files and save the content into a SQL2012 database. JS DNN Task Manager: This is a DNN tutorial to create a task manager projectKinect - Finger and gesture recognition: Find fingertips and pointing direction, record and recognize finger gestures. All this with the depth stream from the Kinect sensor.MarkusUtility: Utilities used in other projectsMASSIVE DATA TRANSFER OPTIMIZATIONS: This is project is used find an efficient way to transfer the massive data via TCP/IP. Minesweeper by S. Joshi: A user-created version of Minesweeper.NETFOX CATAN: very goodPrestazioni e affidabilità: Progetto di prestazioni ed affidabilità del corso di informatica, università Ca' Foscari di VeneziaProyecto Mammut: Este es un proyecto cuyo objetivo es georeferenciar la oferta commercial de la ciudad de Manta,Ecuador mediante puntos de referencias basados en T. Público.Razor Exercise 1: Just an exercise....Sannel Helpers: Varies extension methods I have created.Service Pipeline: A simple library for implementing a service pipeline with your existing service contracts.Set Last Access: Simple console client which can scans folder tree and set LastAccess time by times of newest item in folderSharePoint Web Part Replacement: A set of classes and sample feature receiver used to replace web parts on a SharePoint site collection (SPSite). Sitecore Image Placeholder: Sitecore Image Placeholder module helps Content Editors by displaying placeholders with correct image size when field of type Image is empty.SlidePuzzle: A slide puzzle.StackAttack: StackAttack is a .NET client for use with the Stack Exchange API v2.1.testASPsite: Nothing of interesttestdd18102012git01: dtestdd18102012tfs02: stestddgit10182012git03: tTransform Manager Task for creating assets in Windows Azure Media Services: Task for Transform Manager that creates assets in Windows Azure Media Services and requests a stream locator. Used to push assets into the cloud for streaming.Trie for C#: Implementing the Trie structer in C#/.Netwsccm11aah: My Project for Web Scripting and Content Creation module submitted to Steve Bennet and Mariana Lilleywuggi: Wuggi is a simple website that focuses on its users input to enrich its content. Discussions and feedback are always welcomed on Wuggi.YahtzeePC: A Yahtzee emulator for the PC.

    Read the article

  • Blender to 3ds max to cal3d format

    - by Kaliber64
    There are quite a few questions on cal3d but they are old and don't apply anymore. In Blender(must be 2.49a for python script to work!!!): I have a scene with 7 meshes, 1 armature, 10 bones. I tried going to one mesh to simplify it but doesn't change anything. I found a small blend file that was used for cal3d and it exported just fine. So I tried to copy it's setup with no success. EDIT*8/13/2012 In the last week here is what I have found so far. I made the mesh in the newest blender(2.62?) and exported it to import it in the old one(2.49a). Did an animation in the old one because importing new blend files to old blenders, its just said it would lose keyframe data and all was good. And then you get the last problem of it not exporting meshes. BUT I found that meshes made in the old one export regardless. I can't find any that won't export. So if I used the old blender to remake my model I could get it to export :) At this point I found a modified release of cal3d (because the most core model variable would not initiate as I made a really small test subject in old blender instead of remaking my big one which took 4 hours.) which fixes the morph objects and adds what cal3d left off with. Under their license they have to release the modification but it has no documentation so I have to figure it out on my own. Its mostly the same. But with this lib it came with a 3ds max exporter. My question now is how do I transfer armature and mesh information from blender to 3ds max in order to export into cal3d format. Every time I try the models are see through and small and there are no bones. The formats I have tried to import are .3ds .obj(mesh only) and COLLADA. In all of them the mesh is invisible and no bones. It says the default texture is on so I should be able to see it. All the vertices are present I found a vertex highlighter so I can see those. If any of this is confusing let me know so I can clear it up. Its late .<=sleep.

    Read the article

  • What is the use of Association, Aggregation and Composition (Encapsulation) in Classes

    - by SahilMahajanMj
    I have gone through lots of theories about what is encapsulation and the three techniques of implementing it, which are Association, Aggregation and Composition. What i found is, Encapsulation Encapsulation is the technique of making the fields in a class private and providing access to the fields via public methods. If a field is declared private, it cannot be accessed by anyone outside the class, thereby hiding the fields within the class. For this reason, encapsulation is also referred to as data hiding. Encapsulation can be described as a protective barrier that prevents the code and data being randomly accessed by other code defined outside the class. Access to the data and code is tightly controlled by an interface. The main benefit of encapsulation is the ability to modify our implemented code without breaking the code of others who use our code. With this feature Encapsulation gives maintainability, flexibility and extensibility to our code. Association Association is a relationship where all object have their own lifecycle and there is no owner. Let’s take an example of Teacher and Student. Multiple students can associate with single teacher and single student can associate with multiple teachers but there is no ownership between the objects and both have their own lifecycle. Both can create and delete independently. Aggregation Aggregation is a specialize form of Association where all object have their own lifecycle but there is ownership and child object can not belongs to another parent object. Let’s take an example of Department and teacher. A single teacher can not belongs to multiple departments, but if we delete the department teacher object will not destroy. We can think about “has-a” relationship. Composition Composition is again specialize form of Aggregation and we can call this as a “death” relationship. It is a strong type of Aggregation. Child object dose not have their lifecycle and if parent object deletes all child object will also be deleted. Let’s take again an example of relationship between House and rooms. House can contain multiple rooms there is no independent life of room and any room can not belongs to two different house if we delete the house room will automatically delete. The question is: Now these all are real world examples. I am looking for some description about how to use these techniques in actual class code. I mean what is the point for using three different techniques for encapsulation, How these techniques could be implemented and How to choose which technique is applicable at time.

    Read the article

  • Started wrong with a project. Should I start over?

    - by solidsnake
    I'm a beginner web developer (one year of experience). A couple of weeks after graduating, I got offered a job to build a web application for a company whose owner is not much of a tech guy. He recruited me to avoid theft of his idea, the high cost of development charged by a service company, and to have someone young he can trust onboard to maintain the project for the long run (I came to these conclusions by myself long after being hired). Cocky as I was back then, with a diploma in computer science, I accepted the offer thinking I can build anything. I was calling the shots. After some research I settled on PHP, and started with plain PHP, no objects, just ugly procedural code. Two months later, everything was getting messy, and it was hard to make any progress. The web application is huge. So I decided to check out an MVC framework that would make my life easier. That's where I stumbled upon the cool kid in the PHP community: Laravel. I loved it, it was easy to learn, and I started coding right away. My code looked cleaner, more organized. It looked very good. But again the web application was huge. The company was pressuring me to deliver the first version, which they wanted to deploy, obviously, and start seeking customers. Because Laravel was fun to work with, it made me remember why I chose this industry in the first place - something I forgot while stuck in the shitty education system. So I started working on small projects at night, reading about methodologies and best practice. I revisited OOP, moved on to object-oriented design and analysis, and read Uncle Bob's book Clean Code. This helped me realize that I really knew nothing. I did not know how to build software THE RIGHT WAY. But at this point it was too late, and now I'm almost done. My code is not clean at all, just spaghetti code, a real pain to fix a bug, all the logic is in the controllers, and there is little object oriented design. I'm having this persistent thought that I have to rewrite the whole project. However, I can't do it... They keep asking when is it going to be all done. I can not imagine this code deployed on a server. Plus I still know nothing about code efficiency and the web application's performance. On one hand, the company is waiting for the product and can not wait anymore. On the other hand I can't see myself going any further with the actual code. I could finish up, wrap it up and deploy, but god only knows what might happen when people start using it. What do you think I should do?

    Read the article

  • Play or Lift: which one is more explicit?

    - by Andrea
    I am going to investigate web development with Scala, and the choice is between learning Lift or Play: probably I will not have enough time to try both, at least at first. Now, many comparisons between the two are available on the internet, but I would like to know how do they compare with respect to being explicit and involving less magic. Let me explain what I mean by example. I have used, to various degrees, CakePHP, symfony2, Django and Grails. I feel a very clear distinction between Django and symfony2, which are very explicit about what you are doing, and Grails and CakePHP, which try to do their best to guess what you are trying to achieve and often feel "magical". Let me give some examples comparing Django and Grails. In Django, views are functions that take a request as input and return a response. You can instantiate explicitly an instance of HttpResponse and populate its body with a string, or you can use shortcut functions to leverage the template system. In any case the return value from your view always has the same type. In contrast, the render method from Grails is highly polymorphic. You can throw a context at it and it will try to render a template which is found by convention using that context. Or you can pass it a pair of a template path and a context and that will work too. Or a string. Or XML. Grails tries hard to make sense of whatever you return from your controller. In the Django ORM, each model class has a static attribute representing the manager for that class. That manager exposes a fluent interface to build querysets. In Grails, you can have a similar functionality by composing detached criteria. Still, the most common way to query objects seems to be the use of runtime-generated methods like FindUserByEmailNotNull or FindPostByDateGreaterThan. I will not go further, but my point is that in Django-like frameworks you have control over the whole flow of the request/response process, while in Grails-like ones I feel I only have to feel the blanks and the framework will manage the rest of the flow for me. This is not to criticize Grails or CakePHP; which type you prefer is mainly a matter of preference. In fact, I happen to like some aspects of Grails, but I feel more comfortable with a framework which does less for me. Back to the point of the question: which one among Play and Lift is more explicit about what you do and which one tries to simplify more what you have to do with a layer of "magic"?

    Read the article

  • More Efficient Data Structure for Large Layered Tile Map

    - by Stupac
    It seems like the popular method is to break the map up into regions and load them as needed, my problem is that in my game there are many AI entities other than the player out performing actions in virtually all the regions of the map. Let's just say I have a 5000x5000 map, when I use a 2D array of byte's to render it my game uses around 17 MB of memory, as soon as I change that data structure to a my own defined MapCell class (which only contains a single field: byte terrain) my game's memory consumption rockets up to 400+ MB. I plan on adding layering, so an array of byte's won't cut it and I figure I'd need to add a List of some sort to the MapCell class to provide objects in the layers. I'm only rendering tiles that are on screen, but I need the rest of the map to be represented in memory since it is constantly used in Update. So my question is, how can I reduce the memory consumption of my map while still maintaining the above requirements? Thank you for your time! Here's a few snippets my C# code in XNA4: public static void LoadMapData() { // Test map generations int xSize = 5000; int ySize = 5000; MapCell[,] map = new MapCell[xSize,ySize]; //byte[,] map = new byte[xSize, ySize]; Terrain[] terrains = new Terrain[4]; terrains[0] = grass; terrains[1] = dirt; terrains[2] = rock; terrains[3] = water; Random random = new Random(); for(int x = 0; x < xSize; x++) { for(int y = 0; y < ySize; y++) { //map[x,y] = new MapCell(terrains[random.Next(4)]); map[x,y] = new MapCell((byte)random.Next(4)); //map[x, y] = (byte)random.Next(4); } } testMap = new TileMap(map, xSize, ySize); // End test map setup currentMap = testMap; } public class MapCell { //public TerrainType terrain; public byte terrain; public MapCell(byte itsTerrain) { terrain = itsTerrain; } // the type of terrain this cell is treated as /*public Terrain terrain { get; set; } public MapCell(Terrain itsTerrain) { terrain = itsTerrain; }*/ }

    Read the article

  • OpenGLES GLSL Shader attributes always bound to 0

    - by codemonkey
    So I have a very simple vertex shader as follows #version 120 attribute vec3 position; attribute vec3 inColor; uniform mat4 mvp; varying vec3 fragColor; void main(void){ fragColor = inColor; gl_Position = mvp * vec4(position, 1.0); } Which I load, as well as the fragment shader: #version 120 varying vec3 fragColor; void main(void) { gl_FragColor = vec4(fragColor,1.0); } Which I then load, compile, and link to my shader program. I check for link status using glGetProgramiv(shaderProgram, GL_LINK_STATUS, &shaderSuccess); which returns GL_TRUE so I think its ok. However, when I query the active attributes and uniforms using #ifdef DEBUG int totalAttributes = -1; glGetProgramiv(shaderProgram, GL_ACTIVE_ATTRIBUTES, &totalAttributes); for(int i=0; i<totalAttributes; ++i) { int name_len=-1, num=-1; GLenum type = GL_ZERO; char name[100]; glGetActiveAttrib(shaderProgram, GLuint(i), sizeof(name)-1, &name_len, &num, &type, name ); name[name_len] = 0; GLuint location = glGetAttribLocation(shaderProgram, name); fprintf(stderr, "Attribute %s is bound at %d\n", name, location); } int totalUniforms = -1; glGetProgramiv(shaderProgram, GL_ACTIVE_UNIFORMS, &totalUniforms); for(int i=0; i<totalUniforms; ++i) { int name_len=-1, num=-1; GLenum type = GL_ZERO; char name[100]; glGetActiveUniform(shaderProgram, GLuint(i), sizeof(name)-1, &name_len, &num, &type, name ); name[name_len] = 0; GLuint location = glGetUniformLocation(shaderProgram, name); fprintf(stderr, "Uniform %s is bound at %d\n", name, location); } #endif I get: Attribute inColor is bound at 0 Attribute position is bound at 1 Uniform mvp is bound at 0 Which leads to failure when trying to use the shader to render the objects. I have tried switching the order of declaration of position & inColor, but still, only position is bound with the other two giving 0 Can someone please explain why this is happening? Thanks

    Read the article

  • Using INotifyPropertyChanged in background threads

    - by digitaldias
    Following up on a previous blog post where I exemplify databinding to objects, a reader was having some trouble with getting the UI to update. Here’s the rough UI: The idea is, when pressing Start, a background worker process starts ticking at the specified interval, then proceeds to increment the databound Elapsed value. The problem is that event propagation is limeted to current thread, meaning, you fire an event in one thread, then other threads of the same application will not catch it. The Code behind So, somewhere in my ViewModel, I have a corresponding bethod Start that initiates a background worker, for example: public void Start( ) { BackgroundWorker backgroundWorker = new BackgroundWorker( ); backgroundWorker.DoWork += IncrementTimerValue; backgroundWorker.RunWorkerAsync( ); } protected void IncrementTimerValue( object sender, DoWorkEventArgs e ) { do { if( this.ElapsedMs == 100 ) this.ElapsedMs = 0; else this.ElapsedMs++; }while( true ); } Assuming that there is a property: public int ElapsedMs { get { return _elapsedMs; } set { if( _elapsedMs == value ) return; _elapsedMs = value; NotifyThatPropertyChanged( "ElapsedMs" ); } } The above code will not work. If you step into this code in debug, you will find that INotifyPropertyChanged is called, but it does so in a different thread, and thus the UI never catches it, and does not update. One solution Knowing that the background thread updates the ElapsedMs member gives me a chance to activate BackgroundWorker class’ progress reporting mechanism to simply alert the main thread that something has happened, and that it is probably a good idea to refresh the ElapsedMs binding. public void Start( ) { BackgroundWorker backgroundWorker = new BackgroundWorker( ); backgroundWorker.DoWork += IncrementTimerValue; // Listen for progress report events backgroundWorker.WorkerReportsProgress = true; // Tell the UI that ElapsedMs needs to update backgroundWorker.RunWorkerCompleted += ( sender, e ) => { NotifyThatPropertyChanged( "ElapsedMs" ) }; backgroundWorker.RunWorkerAsync( ); } protected void IncrementTimerValue( object sender, DoWorkEventArgs e ) { do { if( this.ElapsedMs == 100 ) this.ElapsedMs = 0; else this.ElapsedMs++; // report any progress ( sender as BackgroundWorker ).ReportProgress( 0 ); }while( true ); } What happens above now is that I’ve used the BackgroundWorker cross thread mechanism to alert me of when it is ok for the UI to update it’s ElapsedMs field. Because the property itself is being updated in a different thread, I’m removing the NotifyThatPropertyChanged call from it’s Set method, and moving that responsability to the anonymous method that I created in the Start method. This is one way of solving the issue of having a background thread update your UI. I would be happy to hear of other cross-threading mechanisms for working in a MCP/MVC/MVVM pattern.

    Read the article

  • What does the Spring framework do? Should I use it? Why or why not?

    - by sangfroid
    So, I'm starting a brand-new project in Java, and am considering using Spring. Why am I considering Spring? Because lots of people tell me I should use Spring! Seriously, any time I've tried to get people to explain what exactly Spring is or what it does, they can never give me a straight answer. I've checked the intros on the SpringSource site, and they're either really complicated or really tutorial-focused, and none of them give me a good idea of why I should be using it, or how it will make my life easier. Sometimes people throw around the term "dependency injection", which just confuses me even more, because I think I have a different understanding of what that term means. Anyway, here's a little about my background and my app : Been developing in Java for a while, doing back-end web development. Yes, I do a ton of unit testing. To facilitate this, I typically make (at least) two versions of a method : one that uses instance variables, and one that only uses variables that are passed in to the method. The one that uses instance variables calls the other one, supplying the instance variables. When it comes time to unit test, I use Mockito to mock up the objects and then make calls to the method that doesn't use instance variables. This is what I've always understood "dependency injection" to be. My app is pretty simple, from a CS perspective. Small project, 1-2 developers to start with. Mostly CRUD-type operations with a a bunch of search thrown in. Basically a bunch of RESTful web services, plus a web front-end and then eventually some mobile clients. I'm thinking of doing the front-end in straight HTML/CSS/JS/JQuery, so no real plans to use JSP. Using Hibernate as an ORM, and Jersey to implement the webservices. I've already started coding, and am really eager to get a demo out there that I can shop around and see if anyone wants to invest. So obviously time is of the essence. I understand Spring has quite the learning curve, plus it looks like it necessitates a whole bunch of XML configuration, which I typically try to avoid like the plague. But if it can make my life easier and (especially) if make it can make development and testing faster, I'm willing to bite the bullet and learn Spring. So please. Educate me. Should I use Spring? Why or why not?

    Read the article

  • 3D terrain map with Hexagon Grids (XNA)

    - by Rob
    I'm working on a hobby project (I'm a web/backend developer by day) and I want to create a 3D Tile (terrain) engine. I'm using XNA, but I can use MonoGame, OpenGL, or straight DirectX, so the answer does not have to be XNA specific. I'm more looking for some high level advice on how to approach this problem. I know about creating height maps and such, there are thousands of references out there on the net for that, this is a bit more specific. I'm more concerned with is the approach to get a 3D hexagon tile grid out of my terrain (since the terrain, and all 3d objects, are basically triangles). The first approach I thought about is to basically draw the triangles on the screen in the following order (blue numbers) to give me the triangles for terrain (black triangles) and then make hexes out of the triangles (red hex). http://screencast.com/t/ebrH2g5V This approach seems complicated to me since i'm basically having to draw 4 different types of triangles. The next approach I thought of was to use the existing triangles like I did for a square grid and get my hexes from 6 triangles as follows http://screencast.com/t/w9b7qKzVJtb8 This seems like the easier approach to me since there are only 2 types of triangles (i would have to play with the heights and widths to get a "perfect" hexagon, but the idea is the same. So I'm looking for: 1) Any suggestions on which approach I should take, and why. 2) How would I translate mouse position to a hexagon grid position (especially when moving the camera around), for example in the second image if the mouse pointer were the green circle, how would I determine to highlight that hexagon and then translating that into grid coordinates (assuming it is 0,0)? 3) Any references, articles, books, etc - to get me going in the right direction. Note: I've done hex grid's and mouse-grid coordinate conversion before in 2d. looking for some pointers on how to do the same in 3d. The result I would like to achieve is something similar to the following: http :// www. youtube .com / watch?v=Ri92YkyC3fw (sorry about the youtube link, but it will only let me post 2 links in this post... same rep problem i mention below...) Thanks for any help! P.S. Sorry for not posting the images inline, I apparently don't have enough rep on this stack exchange site.

    Read the article

  • Web Development Goes Pre-Visual InterDev

    - by Ken Cox [MVP]
    As a longtime and hardcore ASP.NET webforms developer, I’m finding the new client-side development world a bit of a grind.  I love learning new technologies, but I can’t help feeling we’ve regressed and lost our old RAD advantage as we move heavy lifting to the client. For my latest project, I’m using Telerik’s KendoUI in Visual Studio 2012. To say I feel clumsy writing this much JavaScript is an understatement. It seems like the only safe way to ‘write’ this code is by copying a working snippet from someone else and pasting it into my HTML page.  For me, JavaScript has largely been for small UI tasks like client-side validation and a bit of AJAX – and often emitted by a server-side control. I find myself today lost in nests of curly braces that Ctrl+K, Ctrl+D doesn’t seem to understand that well either. IntelliSense, my old syntax saviour, doesn’t seem to have kept up with this cobweb of code either. Code completion? Not seeing it. As I fumbled about this evening, I thought about how web development rocketed forward when Microsoft introduced Visual InterDev. Its Design-Time Controls (DTCs) changed the way we created sites. All the iterations of Visual Studio have enhanced that server-side experience where you let a tool write the bulk of the code and manually finesse it from there. What happened? Why am I typing  properties and values (especially default values!) into VS 2012 to get a client-side grid on a page? Where are the drag and drop objects that traditionally provided 70 percent of the mark-up and configuration?  Did we forget how to write Property Pages where you enter a value and the correct syntax appears magically in the source code? To me, the tooling was looking the other way as the scene shifted from server-side code to nimble client-side script. It’ll have to catch up. Although JavaScript is the lingua franca of web browsers, the language is unwieldy, tough to maintain, and messy to debug. If a .NET JIT compiler can turn our VB, F#, and C# source code into an Intermediate Language that executes on a computer, I don’t see why there can’t be a client-side compiler that turns a .NET language into JavaScript that browsers can consume.

    Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >