Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 389/750 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• DD-WRT Router acting as a Switch and Wi-Fi AP

  - by dotnetchris

  Recently I upgraded to Comcast Business and their modem has a built-in router so I took off my DD-WRT router and moved to a location in my home where I needed more ports and Wi-Fi (preferably without running new Ethernet cables since it's 50-100 foot run through floor and ceilings). I have my network cable from my Comcast modem going into Port 1 of my DD-WRT router with Port 2 and 3 being networked PCs. I have DD-WRT setup as a DHCP forwarder with the firewall disabled. This lets my all of my devices access the network fine. Is the correct the way to do this? Or is this a less optimal solution and it should be done in a slightly different way?

  Read the article

• Trying to configure DNS on a Godaddy Virtual Dedicated host, Mediatemple Domain Registration

  - by dclowd9901

  A client of mine purchased VD hosting with Godaddy and a domain name with Mediatemple. I've never configured DNS from scratch, and I'm finding it very difficult to find any sort of explanation on how to go about it. As of right now, Mediatemple is pointing to the Godaddy's ns1.domaincontrol.com and ns2.domaincontrol.com nameservers. The VD hosting on Godaddy (via their Simple Control Panel) has options to "Add a new domain", which brings you through a wizard of sorts that asks you if the domain has already been registered (yes), what it is (dclowd9901.com for this example), create a system username and password for it (with checkboxes for SSH and FTP access), which level of user can administer it, and whether a mail account should be setup. When complete, it also creates a zone file. In this zone file, the Primary nameserver is ns1.dclowd9901.com; the records are as follow (where 12.23.12.34 is the presumed host): @ A 12.23.12.34 @ NS ns1 @ NS ns2 ns1 A 12.23.12.34 ns2 A 12.23.12.34 @ MX mail www A 12.23.12.34 ftp A 12.23.12.34 ssh A 12.23.12.34 mail A 12.23.12.34 If anyone can shed any light on this for me, explain to me the interactions between the registrar and the host and so on, I'd be very grateful. Thanks in advance for the help.

  Read the article

• Wireless Repeating with Netgear N750 (WNDR4300)

  - by jomo1911

  I have a Netgear N750 as my main router, which connects to the internet via a modem. I have a second Netgear N750 which I want to use to repeat the wireless signal of the main router. I logged in to routerlogin of my main router (192.168.1.1) and set up the "Wireless Repeating Function". I set it as the "Wireless Base Station" and filled in the MAC adress of my second Netgear N750. Then I logged in to routerlogn of my second router and set it up as the "Wireless Repeater", I gave it the IP 192.168.1.11 and filled in the MAC adress of the base station. During the setup of the second router (Repeater) I had to disable all security functions. If I connect to the repeaters' WLAN signal, I get no internet connection. Maybe you can help me, thanks

  Read the article

• Setting up Lan within a Lan

  - by nageeb

  How unreasonable would it be to setup a small LAN within an existing LAN? I'm setting up a series of video surveillance servers and a number of IP cameras in a client's location and cannot have my equipment on the same network as their local machines. My network is essentially self-contained and the only device that anyone needs to access is a web-app on one of the machines. Basically I'm thinking of installing a SOHO router which would uplink to their LAN, and then set up some NAT rules on both their router and my router, to allow outside access to the webserver. Is there anything fundamental that i'm missing which would prevent this from working?

  Read the article

• Unable to authenticate Windows XP clients agains Snow Leopard Server PDC after 10.6.2 upgrade

  - by Roland

  I have setup a Snow Leopard Server 10.6.1 as a PDC without problems to authenticate Windows XP clients. Joining a Windows XP client to the SLS PDC Domain and log in from a Windows XP client to the SLS PDC Domain are working. After the update to Snow Leopard Server 10.6.2 the authentication is broken. opendirectory_smb_pwd_check_ntlmv1 gave -14090 [eDSAuthFailed] By changing the Windows XP "Network security: LAN Manager authentication level" policy to NTVLM2 responses only the authentication agains a SMB share is possible, but trying to join SLS PDC Domain is still not possible. opendirectory_smb_pwd_check_ntlmv2 gave -14090 [eDSAuthFailed] Any ideas? Is anyone else having similar authentication difficulties?

  Read the article

• Using Fiddler with BizTalk's HTTP Adapter

  - by Christopher House

  I'm working on an orchestration that's retrieving some data from a Java servlet.  The servlet takes a parameter string via HTTP post and returns POX (plain old XML, no SOAP here).  I was having trouble getting a valid response from the servlet when I was sending some test messages and wanted to see what my messages were looking like as they went across the wire.  Normally I was using WCF, I'd setup message logging, but since that's obviously not an option with the HTTP adapter, my thoughts turned to Fiddler.  A quick Google search turned up some promising results.  The posts I read all referred to using Fiddler with the SOAP adapter, but I thoght I could apply the same ideas to the HTTP adapter.  This led me to try setting the following context properties: HttpRequestMessage(HTTP.UseProxy) = true; HttpRequestMessage(HTTP.ProxyName) = "127.0.0.1"; HttpRequestMessage(HTTP.ProxyPort) = 8888; I rebuilt my orch, gac'd it, bounced my host and tried submitting a test message.  Fiddler was running but I didn't see any traffic show up.  I tried fully undeploying/redeploying my application and still, no traffic in Fiddler.  I was starting to think that BizTalk was ignoring the proxy settings.  To confirm this, I closed Fiddler and submitted a test message.  Sure enough, the orch ran to completion, proving that BizTalk was ignoring the proxy settings. I went back to my orch to see if there could be any other context proprties I needed to set.  I saw one that looked promising:  HTTP.UseHandlerProxySettings.  I set this to false, rebuilt my orch and this time when I submitted, I got an error message, which made sense, I didn't have Fiddler running.  I started up Fiddler, submitted another message and there it was, my HTTP traffic, just as I hoped.  And, I was quickly able to figure out what the problem was...I had forgotten to set HTTP.ContentType to application/x-www-form-urlencoded.

  Read the article

• GnuPG PHP gnupg Folder & Files Permission

  - by Michael Robinson

  Situation: we plan on using PHP's GnuPG extension to encrypt/decrypt files. Currently we've setup some test cases, using keys generated with GPG. The generated files reside in: /Users/username/.gnupg/ I am able to get keyinfo for the key I want to use to encrypt/decrypt, but when I attempt to use addencryptkey, I get: (E_WARNING: 2): gnupg::addencryptkey() [gnupg.addencryptkey]: get_key failed I think this is due to the permissions on the ~/.gnupg folder & enclosed files. The files are owned by me - username, but apache runs as www. A few days ago I did have this working, but it seems each time I use GPG Keychain Access to import / export a key, the folder's permissions are changed. Question: What are the exact permissions required to allow PHP's GnuPG to add encrypt & decrypt keys?

  Read the article

• Silverlight Cream for March 06, 2011 -- #1054

  - by Dave Campbell

  In this Back from the Summit Issue, I am overloaded with posts to choose from. Submittals go first, but I'll eventually catch up... hopefully by MIX :) : Ollie Riches(-2-), Colin Eberhardt, John Papa, Jeremy Likness, Martin Krüger, Joost van Schaik, Karl Shifflett, Michael Crump, Georgi Stoyanov, Yochay Kiriaty, Page Brooks, and Deborah Kurata. Above the Fold: Silverlight: "ClassifiedCabinet: A Quick Start" Georgi Stoyanov WP7: "Easy access to WMAppManifest.xml App properties like version and title" Joost van Schaik Multiple: "Flashcards.Show Version 2 for the Desktop, Browser, and Windows Phone" Yochay Kiriaty Shoutouts: Mohamed Mosallem delivered an online session at the Second Riyadh Online Community Summit: Silverlight 4.0 with SharePoint 2010 John-Daniel Trask posted about a release of a new set of tools released for WP7 development... there's a free trial, so definitely worth a look: Mindscape Phone Elements released! From SilverlightCream.com: WP7Contrib: Trickling data to a bound collection Ollie Riches submitted a couple links... first up is this on a way they found to decrease the load on a data template in WP7 to get under the 90 mb limit and then added their solution to the WP7Contrib lib. WP7Contrib: Why we use SilverlightSerializer instead of DataContractSerializer Ollie Riches' next submittal compares the performance of the SilverlightSerializer & DataContractSerializer on the WP7 platform. MVVM Charting – Binding Multiple Series to a Visiblox Chart Colin Eberhardt sent me this post where he describes binding multiple series to a chart with no code-behind... great long multi-phase tutorial all with source. Silverlight TV 64: Dive into 64bit Support, App Model and Security John Papa has Nick Kramer of the Silverlight team up for his latest Silverlight TV episode, discussing some cool new Silverlight stuff: 64-bit support, multiple windows, etc. Building a Windows Phone 7 Application with UltraLight.mvvm Jeremy Likness has a pre-summit tutorial up on his UltraLight.mvvm project, and how he would use it to build a WP7 app... great to meet you, Jeremy! How to: Storyboard only start with the conspicuousness of the application in the browser window Martin Krüger continues his Storyboard startup solutions with this one about what to do if the Silverlight app is small or simply an island on an html page. Easy access to WMAppManifest.xml App properties like version and title Joost van Schaik posted about the WP7 manifest file and how you can get access to that information at runtime... why you ask? How about version number or title? Be sure to read the helpful hints in the last paragraph too! Mole 2010 Released Karl Shifflett, Josh Smith, and others have released the latest version of Mole... well worth the money in my opinion, if only it worked for Silverlight! (not their fault) Changing the Default Windows Phone 7 Deployment Target In Visual Studio 2010 Michael Crump points out an annoyance with the 2011 WP7 tools update... VS2010 defaults to the device rather than the emulator... and he shows us how to get it pointed back to the emulator! ClassifiedCabinet: A Quick Start Georgi Stoyanov posted a QuickStart to a 'ClassifiedCabinet' control posted on CodePlex... check out the demo first, you'll want to read the article after that. He builds a simple project from scratch using the control. Flashcards.Show Version 2 for the Desktop, Browser, and Windows Phone Yochay Kiriaty has a post up about FlashCards.Show version 2 that he worked on with Arik Poznanski and has it now running on the desktop, browser, and WP7, plus you get the source... I've been wanting to write just such an app for WP7, so hey... this saves me some time! A Simple Focus Manager for Jounce Applications Page Brooks has a post up about Jeremy Likness' Jounce... how to set focus to a particular control when a view loads. Silverlight Charting: Formatting the Axis Deborah Kurata is continuing her charting series with this one on setting axis font color and putting the text at an angle... really dresses up the chart! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Find which config file Apache uses to find virtual host

  - by eje211

  I have a rather complicated Apache setup: some config files have to be manually written and some have to be automatically generated. So far, I've had no problems. But now, I've just tried to set a site at: newsubdomain.mydomain.com and Apache directs it to the data for: www.someotherdomain.com I've looking into all the many config files and can't find anything wrong. All is pointing where it should and no definitions, as far as I can tell, overlap. So what I'm wondering is: is there a way to see which config files or config instructions Apache is using to match a URL to a directory? Tanks.

  Read the article

• ISA Proxy - HTTPS Traffic

  - by x100

  We have an ISA 2006 setup for our organisations proxy. It's been working well for the last few months just blocking everything except a few allowed web site and web applications. We need to allow some people to access a web application hosted off site via HTTPS. I've tried and tried, wasted 3 days on it and have given in. Can someone please tell me how on earth this is achieved? Looking at the Monitor, it looks like it passes one rule, then is blocked by the default rule. I just don't unterstand it well enough to take it on further.

  Read the article

• Can't RDP Into Windows Server After Windows Server Establishes VPN Session

  - by Jennifer Baker

  Hi there. I've setup a Windows 2008 Server in a Cloud Environment. I am able to RDP to this Windows Server ("aka CloudServer") in the Cloud Environment. When I establish PPTP VPN connection from the CloudServer back to our Windows Server ("aka OfficeServer"), my RDP session is dropped and it won't let me RDP back in. The only way how I can RDP to the CloudServer is using the DHCP ip address issued from the OfficeServer. What do I need to change on the CloudServer? Thanks in advance for your help! Jennifer

  Read the article

• Systems Solutions at COLLABORATE12

  - by ferhat

  Want to connect with fellow Oracle users and learn more about how to maximize your Oracle software environments with Oracle Systems?   Pack your bags for Las Vegas!   COLLABORATE 12  is right around the corner! COLLABORATE 12 Conference will be held at the Mandalay Bay in Las Vegas, NV 22-26 April, 2012. This is an event designed and delivered by users just like you with sessions, interactive panel discussions and hands-on learning opportunities packed with first-hand experiences, case studies and practical “how-to” content.. This year’s event includes a number of educational sessions and demos for users interested in learning from the experts how to use Oracle Optimized Solutions to get the most out of their Oracle Technology and Application software. Oracle Optimized Solutions are proven blueprints that eliminate integration guesswork by combing best in class hardware and software components to deliver complete system architectures that are fully tested, and include documented best practices that reduce integration risks and deliver better application performance.  And because they are highly flexible by design,  Oracle Optimized Solutions   can be implemented as an end-to-end solution or easily adapted into existing environments. Follow Oracle Infrared at Twitter, Facebook, Google+, and LinkedIn  to catch the latest news, developments, announcements, and inside views from  Oracle Optimized Solutions. Please come by our Exhibition Booth #1273 to see the demos and meet 1-1 with the experts behind a number of  Oracle Optimized Solutions  including those for JD Edwards EnterpriseOne, E-Business Suite, PeopleSoft HCM, Oracle WebCenter, and Oracle Database.  Exhibitor Showcase Booth #1273 DAY TIME TITLE Monday  April 23 6:00 pm - 8:00 pm Welcome Reception in the Exhibitor Showcase Tuesday  April 24 10:15 am - 4:00 pm Exhibitor Showcase Open 1:00 pm - 2:00 pm Dedicated Exhibitor Showcase Time 5:30 pm - 7:00 pm Exhibitor Showcase Happy Hour Wednesday  April 25 10:30 am - 3:00 pm Exhibitor Showcase Open 2:15 pm -3:00 pm Afternoon Break in Exhibitor Showcase  There are also a number of deep dive, educational sessions covering deployment best practices using Oracle’s engineered systems and best-in-class hardware, operating system and virtualization technologies.  Education Sessions DAY TIME TITLE LOCATION Monday  April 23 9:45 am - 10:45 am Architecting and Implementing Backup and Recovery Solutions Surf E Tuesday  April 24 2:00 pm – 3:00 pm Oracle's High Performance Systems for JD Edwards EnterpriseOne Mandalay Bay GH 4:30 pm - 5:30 pm Virtualization Boot Camp: What's New with Oracle VM Server for x86 Mandalay Bay C 9:30 am - 10:30 am Oracle on Oracle VM - Expert Panel Mandalay Bay L Wednesday  April 25 9:30 am - 10:30 am Cloud Computing Directions: Part II Understanding Oracle's Cloud Directions South Seas E  And don’t forget the keynotes and software roadmap sessions! Keynotes and Roadmap Sessions DAY TIME TITLE LOCATION Sunday  April 22 3:20 pm – 4:20 pm Oracle’s Cloud Computing Strategy Breakers B Monday  April 23 11:00 am – 12:00 pm JD Edwards - Vision, Promises and Execution: IT'S THE WAY WE ROLL and Why it Matters! Mandalay Bay A 11:00 am – 12:00 pm PeopleSoft Executive Update and Roadmap Mandalay Bay J 1:15 pm - 2:15 pm Oracle Database - Engineered for Innovation Mandalay Bay L 2:30 pm - 3:30 pm Oracle E-Business Suite Applications Strategy and General Manager Update Mandalay Bay D Tuesday  April 24 9:15 am - 10:15 am IT at Oracle: The Art of IT Transformation to Enable Business Growth Mandalay Bay Ballroom H

  Read the article

• SOA Suite Integration: Part 2: A basic BPEL process

  - by Anthony Shorten

  This is the next in the series about SOA Suite integration with Oracle Utilities Application Framework. One of the first scenarios I am going to illustrate in this series is building a basic BPEL process using Web Service calls to the Oracle Utilities Application Framework. The scenario is this. I will pass in the userid and the BPEL process will call our the AS-User Web Service we created in Part 1. This is just a basic test and illustrate how to import the Web Service into SOA Suite. To use this scenario, you will need access to Oracle SOA Suite, access to a copy of any Oracle Utilities Application Framework based product and Oracle JDeveloper (to build the process). First of all you need to start Oracle JDeveloper and create a new SOA Project to house the BPEL process in. For the purposes of this example I will call the project simpleBPEL and verify that SOA is part of the project. I will select "Composite with BPEL" to denote it as a BPEL process. I can also the same process to create a Mediator or OSB project (refer to the JDeveloper documentation on these technologies). For this example I will use BPEL 1.1 as my specification standard (BPEL 2.0 can also be used if desired). I give the individual BPEL process as simpleBPEL (you can use a different name but I wanted to keep the project and process the same for this example). I will also build a Synchronous BPEL Process as I want a response from the Web Service. I will leave the defaults to save time. I have no have a blank canvas to build my BPEL process against. Note: for simplicity I am going to use as much defaulting as possible. In fact I am not going to specify an input schema for the incoming call as I will use the basic single field used by BPEL as default. The first step is to import the AS-User Web Service into my BPEL project. To do this I use the standard Web Service BPEL component from the Component Palette to import the WSDL into the BPEL project. Now the tricky part (a joke), you drag and drop the component from the Palette onto the right side of the canvas in the Partner Links swim lane. This swim lane is reserved for Partner Links that have a Partner Role (i.e. being called rather than calling). When you drop the Web Service onto the canvas the Create Web Service wizard is invoked to ask for details of the Web Service. At this point you give the BPEL node a name. I have used the name RetrieveUser as a name. I placed the WSDL URL from the XAI Inbound Service screen in the WSDL URL. Once you specify the URL you can press the Find existing WSDL's button to load the information into BPEL from the call. You will notice the Port Type is prefilled with the port from the WSDL. I also suggest that you check copy wsdl and it's dependent artifacts into the project if you intending to work on the BPEL process offline. If you do not check this your target application must be accessible when you work on the BPEL process (that is not always convenient). Note: For the perceptive of you will notice that the URL specified in this example is different to the URL in the last post. The reason is for the demonstrations I shifted to a new server and did not redo all of the past screen captures. If you copy the WSDL into the project you will get an information screen about Localize Files. It is just a confirmation screen. The last confirmation screen is a summary of the partner link (the main tab is locked for editing at this stage). At this stage you have successfully imported the Web Service. To complete the setup of the Web Service you need to set the credentials for the Web Service to use. Refer to the past post on how to do that. Now to use the Web Service. To call the Web Service (as it is just imported not connected to the BPEL process yet), you must add an Invoke action to your BPEL Process. To do this, select Invoke action from the BPEL Constructs zone on the Component Palette and drop it on the edit nodes between the receiveInput and replyOutput nodes This will create an empty Invoke action. You will notice some connectors on the Invoke node. Grab the node closest to your Web Service and drag it to connect the Invoke to your Web Service. This instructs BPEL to use the Invoke to call the Web Service. Once the Invoke action is connected to the Web Service an Edit Invoke edit dialog is displayed. At this point I suggest you name the Invoke node. It is important to name the nodes straightaway and name them appropriately for you to trace the logic. I used InvokeUser as the name in this example. To complete the node configuration you must create Variables to hold the input and output for the call. To do this clock on Automatically Create Input Variable on the Edit Invoke dialog. You will be presented with a default variable name. It uses the node name (that is why it is important to name the node before hitting this button) as a prefix. You can name the variable anything but I usually take the default. Repeat the same for the output variable. You now have a completed node for invoking the service. You have a very basic BPEL process which contains an input, invoke and output node. It is not complete yet though. You need to tell the BPEL process how to pass data from the input to the invoke step and how to take the output from the service call and pass it back to the service. You need to now add an Assign node to assign the input to the Web Service. To do this select Assign activity from BPEL Constructs zone in the Component Palette. Drag and drop the Assign activity between the receiveInput and InvokeUser nodes as you want to pass data between these two nodes. You have now added a new Assign node to your BPEL process Double clicking the node allows you to specify the name of the node. I use AssignUser to describe that I am assigning user data. On the Copy Rules tab you can specify the mapping between the input variable InputVariable/payload/process/input string and the input variable for the Web Service call. We are passing data from the input to BPEL to the relevant input variable on the Web Service. This is simply drag and drop between the two data structures. In the example, I am using the input to pass to the user element in my Web Service as the user is the primary key for the object. The fields become linked (which means data from source will be copied to target). Almost there. You now need to process the output from the Web Service call to the outputVariable of the client call. I have decided to pass back one piece of data, the name associated with the user by concatenating the firstName and lastName elements from the Web Service call. To do this I will use a Transform as it is not just a matter of an Assign action. It is a concatenation operation. This also illustrates how you can use BPEL functionality to transform data from a Web Service call. As with the other components you drag and drop the Transform component to the appropriate place in the BPEL process. In this case we want to transform the output from the Web Service call so we want it after the InvokeUser action and the replyOutput action. The Transform component is actually part of the Oracle Extensions to the BPEL specification. Double clicking the Transform node will allow you to name the node.  In this example I used TransformName. To complete the transform I need to tell the product the source of the transformation and the target of the transform. In the example this is the InvokeUser output variable. I also named the mapper file to TransformName. By clicking the + or pencil icon next to the map I can create the map. The mapping screen is shows the source and target schemas for me to map across. As with the assign I can map the relevant elements. In my example, I first map the firstName from the Web Service to the result element. As I want to concatenate the names, I drop the concat function on the call line. I now attach the last name to the function to indicate the concatenation of the field. By default the names will be concatenated with no space. To make the name legible I add a space between the field by clicking the function and adding a space in the call. I now have a completed mapping. I can now save the whole project as my BPEL process is now complete. As you can see the following happens: We accept input from the client (the userid for the call) in the receiveInput step. We assign that value to the input parameters for the Web Service call in the AssignUser step. We invoke the Web Service call to retrieve the data from the product in the InvokeUser step. We take the output from the InvokeUser step and concatenate the names in the TransformName step. We pass back the data in the replyOutput step. At this point we can deploy the BPEL process to the SOA Suite server. I will not cover this aspect as it really all SOA Suite specific (it is all done via Oracle JDeveloper). Now we need to test the service in SOA Suite. We will use the Fusion Middleware Control test facility. I will assume that credentials have also been setup as per our previous post (else you will get a 401 error). You navigate to the deployed BPEL process within Fusion Middleware Control and select the Test Service option. Specify some test data on the payload at the bottom of the Test Service screen. In my case I am returning my own userid information. On the response tab you will see the result. It works. You can verify the steps using the Audit trace facility on individual calls. As you can see this is a basic BPEL but you get the idea of importing the Web Service is pretty straightforward. You can create more sophisticated BPEL processes using the full facilities in Oracle SOA Suite. I just showed you the basic principals.

  Read the article

• Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

  - by Chris Beach

  This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

  Read the article

• Unix LVM: how to resize root lvm

  - by Hussein Sabbagh

  I took over a virtual server at work after a co-worker left. He, however, setup the server incorrectly at multiple stages and im cleaning them up as I run into them... Currently I realized that the file system is broken in half onto 2 logical volumes both at 50gb. One is mounted as the root directory and the other as the /home directory. Saddly, the server has taken up 46gb of the root lv and i need to expand it. I have already shrunk and remounted the home lv. I resized the root lv, but I can't figure out how to unmount the root directory while the computer is on. Obviously this needs to be done before I can finalize the expansion, but I don't know how. I'd appreciate any help or pointing in the right direction. Thanks in advance. PS this is on a CentOS server.

  Read the article

• Heroku SSL "certificate is only valid for the following names: *.herokuapp.com, herokuapp.com"

  - by benedict_w

  I'm trying to setup a Geotrust SSL certificate for my Heroku app using the SSL Endpoint addon and the instructions at https://devcenter.heroku.com/articles/ssl-endpoint. I generated my public key from my private key using: openssl rsa -in server.orig.key -out server.key and added to the heroku certs: heroku certs:add server.crt server.key Everything seemed to be fine. heroku certs listed the corrected information only with Trusted = false for my certificate. If I go to https://tokyo-2121.herokussl.com the browser says: You attempted to reach tokyo-2121.herokussl.com, but instead you actually reached a server identifying itself as www.mydomain.com. As expected with the certificate apparently identifying the correct domain, but When I set up the CNAME to the given tokyo-2121.herokussl.com and visit my subdomain the browser says: www.mydomain.com uses an invalid security certificate. The certificate is only valid for the following names: *.herokuapp.com , herokuapp.com If I run curl -kv https://www.mydomain.com I get: subjectAltName does not match www.mydomain.com

  Read the article

• How can I make check_nrpe wait for my remote script to finish executing?

  - by Rauffle

  I have a python script that's being used as a plugin for NRPE. This script checks to see if a process if running on a virtual machine by doing an SSH one-liner with a "ps ax | grep process" attached. When executing the script manually, it works as expected and returns a single line of output for NRPE as well as a status based on whether or not the process is running. When I attempt to run the command setup to execute this script (from my Nagios server), I instantly get the output "NRPE: Unable to read output", however when I run the script manually it takes about a second before it returns output. Other commands run just fine, so it would seem like NRPE needs to wait a second or two for output rather than instantly failing, but I've been unable to find any way of accomplishing this; any tips? Thanks PS: The virtual machines are not accessible from anywhere other than the host machine, hence the need for the nrpe plugin to ssh from the host into the VM to check the process.

  Read the article

• Linux Email Server Auto-Reply

  - by Robert Smith

  I need to setup a mail server that has the following functionality: if a user sends an email to a specific address on this server, the server must first check if the email has a PDF attachment, do some processing to that PDF file and then reply to the user's initial mail with the new PDF file attached. My question is how would it be possible to achieve this functionality, and what software / mail server do you recommend? I'm thinking that it can be solved the following way: when the server receives a new email it executes an external Python script that checks the attachment, processes the PDF file and then sends it back in the user's mailbox. What mail server would be able to do this, and what configurations does it need?

  Read the article

• Linux DNS Multi tenant

  - by spicyramen

  I need to setup a multi-tenant DNS solution in Linux DNS Server. Currently I serve multiple companies: Company ABC, Company XYZ, etc... I need to create a) Forwarder zone b) Reverse Forward Zone. I can easily create a Forward Zone with domain abc.com The challenge I have is that each of my customer components share the same IP address. Hence If I create the Reverse Forward Zone I end up with something like this: abc.com 1.1.1.1 host.abc.com xyz.com 1.1.1.1 host.xyz.com If I perform a reverse lookup on host.abc.com it works fine...but if I do a reverse lookup on 1.1.1.1 I get a load balance response of: attempt: host.abc.com attempt: host.xyz.com attempt: host.abc.com Any ideas? I want to add logic to the DNS configuration to handle DNS reverse lookup based on source machine and respond with right hostname. Workaround: Create multiple DNS but this is not scalable.

  Read the article

• Best book for learning linux shell scripting?

  - by chakrit

  I normally works on Windows machines but on some occasions I do switch to development on linux. And my most recent project will be written entirely on a certain linix platforms (not the standard Apache/MySQL/PHP setup). So I thought it would pay to learn to write some linux automation script now. I can get around the system, start/stop services, compile/install stuffs fine. Those are probably basic drills for a programmer. But if, for example, I wanted to deploy a certain application automatically to a newly minted linux machine every month I'd love to know how to do it. So if I wanted to learn serious linux shell scripting, what book should I be reading? Thanks

  Read the article

• Port Forwarding on 80 vs. 8080

  - by Chadworthington

  I am able to access this url (Don't bother clicking on it, it's just an example): http://my.url.com/ This web site works: http://localhost:8080/tfs/web/ I setup my router to forward port 80 to the PC hosting the web site. I also forward port 8080 to the same box. But when I try to access this url I get the eror "Page Cannot be displayed:" http://my.url.com:8080/tfs/web/ I fwded port 8080 the same way I fwded port 80. I also turned off Windows Firewall, in case it was blocking port 8080. Any theories why port 80 works but 8080 does not?

  Read the article

• SFTP jail & Keeping file ownership the same / File owner per folder

  - by Dragonshadow

  I want to setup a jailed SFTP account for a subfolder of another user's home folder, but want the owner of everything in that subfolder to stay the same, including new files and folders uploaded and created by the sftp user, while still allowing access to the files and folders of that subfolder as if the SFTP user was the parent user. rawny bawb-sftp /home/rawny <- rawny owns this /home/rawny/sftp <- rawny owns this too, but bawb-sftp can upload to it, edit files, etc bawb-sftp uploads a file /home/rawny/sftp/lol.txt rawny should still own the file, as if he made it in the first place, even though bawb-sftp was the one that uploaded it. Basically I guess I'm asking for an sftp jail that acts as a highly limited passthrough/puppet for another user?

  Read the article

• procmail issue - splitting delivery of one address based on destination domain

  - by warren

  I use procmail to handle some serverside mail processing. I am trying to setup one email address on a server that support multiple domains (in the example below, domain.net and domain.com). I want mail sent to [email protected] to go to bob and mail sent to [email protected] to go to sara. VERBOSE=off LOGFILE=/dev/null :0 * .domain.net bob :0 * .domain.com sara The above recipe seems to work quite well in that it catches incoming mail to domain.net and forwards it to bob. However, instead of forwarding mail to domain.com to sara, it creates a file in /home/user called sara. What am I doing wrong on this?

  Read the article

• How can I connect any USB device to my computer wirelessly?

  - by daviesgeek

  I am trying to connect the Canon 550D wirelessly to my computer so that I can control it from at a distance. It can connect normally via a USB cable, so I was wondering if there was a way to plug a dongle into the computer, and a dongle into the camera so the two can connect. I'm basically looking for a really long USB cord that will work over long distances (200+ feet). Another important factor is that I really would prefer not having use a power cord, rather just plugging in a dongle, as it will make the setup more mobile. Does anything like this exist? (I know that Cables Unlimited had something like what I wanted, but they went out of business last year)

  Read the article

• Exchange 2010 to Exchange 2010 Public Folder Replication

  - by Archit Baweja

  We have 2 exchange servers in our org. MX1 and MX2. I'm trying to replicate all MX1 public folders to MX2. I've setup replication for all the toplevel folders to include the MX2 server. However no public folders are being replicated. The event log does not show any errors. I've set the diagnostic level for all public folder diagnostics to Highest using get-eventloglevel "MSExchangeIS\9001 Public\*" | set-eventloglevel -Level Expert However besides a 3092 event ID (type: 0x2) generated on MX1 (the source server), there are no events being generated that would notify me of any issues. Some technical details. MX1 is Windows 2008 Standard, MX2 is Windows 2008 Enterprise (eval mode right now).

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >