Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 391/715 | < Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >

• Digest authentication not working: endless cycles of asking for user/pass

  - by bcmcfc

  I'm trying to setup my SVN repository for access remotely. In doing so I have some settings under Apache's dav_svn.conf file. When navigating to hostname/svn, or using Tortoise to do the same it prompts for the user name and password as expected. However, when entering the correct user name and pass that were set in the password file linked to under AuthUserFile it just asks for the credentials again. I think I'm probably missing something simple? The server is running Ubuntu Server 9.10. Accessing SVN remotely does currently work if the authentication lines of dav_svn.conf are commented out. These are the contents of the dav_svn.conf file: <Location /svn> DAV svn SVNPath /home/svn/repo AuthType Digest AuthName "Subversion Repository" AuthDigestDomain /svn/ AuthUserFile /etc/svn_authfile Require valid-user </Location>

  Read the article

• Logging Apparently Not Working - Can't Set Configure Replication

  - by square_eyes

  I'm using a tutorial to set up a master (single) slave setup. When I run the command show master status; I get Empty set (0.00 sec). I have done a lot of research and believe that the log file I have set up isn't being used properly. The master is a Windows server, and I am administering it through workbench. The log file (log-bin.log) I have configured in the options exists, and is accessible by 'System'. But when I open it as a text file it doesn't have any data. So I'm assuming it's not getting used properly. How can I get the logging happening so I can finish setting up this replication? Edit: Purely for reference here is the tutorial. I followed all the steps and double checked everything up until show master status.

  Read the article

• Setting up nginx on Ubuntu?

  - by Industrial

  Hi everyone, I've just setup a VPS running Ubuntu server 10.10 as a test environment to run with nginx. This far i've ran apt-get install nginx php5 php5-cgi and accessed the IP of the VPS with a browser which outputs It works, so it should be ready to run. Never having worked with nginx in the past, I have no idea on what to do next. How should I config my nginx install to run properly as a staging server in my LAN? Apparently, there's multiple configs for nginx including sites-default and nginx-default making me really confused.

  Read the article

• Log php errors in ubuntu

  - by resting

  I followed the setup here: Where is the PHP error log When I look into /var/log/php_errors.log, I could see some PHP errors. PHP Warning: file_get_contents(/var/www/...): failed to open stream: No such file or directory in ... But what I'm trying to see is the error when I removed a semicolon from a statement. That error above has no relation to file from where I removed the semicolon so we can just ignore that. When I access the page with the removed semicolon, I get The website encountered an error while retrieving https://myapp/download/decode/testfile. It may be down for maintenance or configured incorrectly. HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfill the request. But no logs in /var/log/php_errors.log. How do I see the error that usually says which line and which file the process failed? The real reason for trying to see the error is because I have a very huge loop, that throws the HTTP 500 error and I can't see the exact error. I'm just simulation with a removed semicolon to test things out. Other settings: error_reporting = E_ALL & ~E_DEPRECATED display_errors = On On Ubuntu 10.04.4 LTS Update Ok, I managed to get the error message to display. Parse error: syntax error, unexpected T_IF in ... However, it's still not logged. It wasn't displaying previously because Cakephp's debug level was at 0. Setting it to 2 displays the message, but no logs.

  Read the article

• Log internet requests made by vpn client

  - by Adam Schiavone

  How can I log the requests that people make to the internet when they are connected to my VPN? If one of them does something illegal, I need to be able to prove that it was not me, but a VPN client. This really is a just in case type thing. So, I want to be able to see the details (server, port, domain name, and time connected) in a file somewhere. Does windows offer this with its PPTP VPN service, or is there 3rd party software to do this (Free is better)? EDIT I have setup accounting, but that does not seem to tell me what I am looking for. Could someone comment on what accounting does? EDIT 2 Maybe I should heve been clearer. My system is running windows server 2008 r2 and using the stock VPN software (PPTP)

  Read the article

• How to config putty remote port forwarding to connect mysql?

  - by kev

  I installed MySQL to a Windows box. I want to connect it from a Linux box. I run plink to setup a remote port forwarding in Windows box. I try to connect it from Linux box, but it's not working. Windows (192.168.1.101) C:\> plink -v -N -R 3306:localhost:3306 [email protected] -pw ADMIN Also tried putty with this config: Port forwarding: R3306->localhost:3306 Linux (192.168.1.102) $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) $ nc localhost 3306 J 5.5.283V6L[fnu¦¦!¦$N>-c-R9bbG{mysql_native_password

  Read the article

• MAC OSX 10.5.8 need to save rsync password with ssh-copy-id

  - by Brady

  Hello all, I'll start by saying I'm very new to MAC but comfortable in using the command line thanks to using a linux a lot. I currently have rsync setup to run between a MAC OSX 10.5.8 server to a Linux Centos 5.5 Server. This is the command I'm running on the MAC server: rsync -avhe ssh "/Path/To/Data" [email protected]:data/ As it does it prompts for a password but I need it to save the password. After looking around I need to use: ssh-keygen -t dsa save the passkey and then move it over to the Linux server using: ssh-copy-id -i .ssh/id_dsa.pub [email protected] But ssh-copy-id doesnt seem to exist on the MAC server. How do I copy this key over? I've tried searching for the answer myself but the help seems to be all over the place for this.. Any help is greatly appreciated. Scott

  Read the article

• Ubuntu OpenLDAP and Mac OS X Roaming Profiles

  - by Sam Hammamy

  Today, I'm installing OpenLDAP on Ubuntu 11.04. I have gone through the installation before a few times, but what I have never been able to do is use Mac OSX Lion's Directory Utility to administer the LDAP server, and also never got roaming profiles working. SO the question is: 1) Is there a configuration I need in OpenLDAP so I can administer it remotely. I vaguely remember something like that, but I can't find the answer online. 2) What do I need to setup roaming profiles for a mac os x. I'd like to backup all my laptop data to the LDAP's machine, and potentially, also backup with time machine to an external HD mounted no the Ubutnu machine (but that's a few days ahead of time for now).

  Read the article

• Practical RAID Performance?

  - by wag2639

  I've always thought the following to be a general rule of thumb for RAID: RAID 0: Best performance for READ and WRITE from stripping, greatest risk RAID 1: Redundant, decent for READ (I believe it can read from different parts of a file from different hard drives), not the best for WRITE RAID 0+1 (01): combines redundancy of RAID 1 with performance of RAID 0 RAID 1+0 (10): slightly better version of RAID 0+1 RAID 5: good READ performance, bad WRITE performance, redundant IS THIS ASSUMPTION CORRECT? (and how do they compare to a JBOD setup for R/W IO performance) Are certain practical RAID setups better for different applications: gaming, video editing, database (Acccess or SQL)? I was thinking about hard disk drives but does this apply to solid state drives as well?

  Read the article

• Can't find onboard NIC with windows server 2008

  - by Sanarothe

  Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

  Read the article

• How to solve Bumblebee/Nvidia Optimus issues with kernel 3.4 (works perfectly under 3.2)

  - by theJimy

  I installed Ubuntu and could setup to utilize my Intel HD 3000/Geforce GT 540M hybrid graphics perfectly with the method described here: How well do laptops with Nvidia Optimus work? Everything works fine under Kernel 3.2. Now I wanted to upgrade though to Kernel 3.4, as it brings many improvements, especially in saving battery life (ie. Intel RC6)... at least from what I heard. While I had no issues installing the 3.4 Kernel under Ubuntu 12.04 and everything so far runs fine, Bumblebee causes issues under kernel 3.4. When trying to run commands like optirun, lsmod (or similar kernel tools) these just lock up and never return. The Bumblebee developers seem to refuse to help with mainline kernels (as seen here: https://github.com/Bumblebee-Project/bbswitch/issues/17 ). Does anyone know, how to solve this issue? Could I solve this probably, by compiling the kernel and/or Bumblebee against the kernels sources myself and having a Ubuntu-like kernel? Any other idea that might help me to solve this myself, so I could profit from the 3.4 features and Optimus, would be very appreciated.

  Read the article

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• IE8 Windows 7 (64bit) security certificate problem

  - by Steve

  Hi, We have just received some new computers for use in the office (Dell Vostro). They seem to work fine in the main. When we use IE8 to go to some web pages such as yahoo mail it tells us: “There is a problem with this websites security certificate” If we have a look at the details it says: “This certificate cannot be verified up to a trusted certification authority” This however works correctly in Firefox. I don't understand why I should get such an error message, should this not just work? I don't think its anything to do with the certificate itself as this is happening on www.yahoo.co.uk and other commercial (amazon I think?) sites. I think there is something off with the PCs setup. The PC has Windows 7 (64 bit) and Norton Internet Security installed. Any ideas as to why this is happening? Thanks

  Read the article

• Missing eth0 configuration file

  - by Godric Seer

  I have two servers both running Scientific Linux 6 on the same network. Since I want SSH access to both of them, I want to give them both static IPs so I can setup port forwarding and not worry how my router assigns local IPs. I found that I need to edit the configuration file /etc/network-scripts/ifcng-eth0, however that file does not exist. The network card works fine, and I am able to ssh as long as I access the router and find the local ip. Can I simply make my own configuration file, or did I miss some step in configuring the system that I need to complete?

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• How to change from own Internal/Extrernal DNS to use an outsourced service like DNS Made Easy?

  - by Joakim

  Our current setup is a co-located linux box with an openvz kernel with a handful virtual containers for www, mail etc. and one container run Bind9 with a split views configuration serving External and Internal DNS. The HW-Node runs a shorewall firewall and all containers uses private ip's. The box (and DNS) basically handles web and mail for a handful domains and it works well but we still think it would be a good idea to outsource the public DNS and now to my question... Although I am fairly comfortable with the server stuff and DNS, I'm far from a pro and guess I basically need some confirmation that I am thinking in the right direction in that I basically just move the content of our external view (with zone files) to the external service and keep the internal view (or actually remove the view), update the new external DNS with thier names servers, update the info at my registrar and wait for propagation or have I missed something? Maybe someone else here run something similar already and can share some exteriences? I found this question which at least confirms it can be done.

  Read the article

• Windows Server 2008 R2 Server Core with AD Role having GUI Admin Console

  - by Robert Koritnik

  I would like to setup a machine with Windows Server 2008 R2 Server Core and install following server roles: Active Directory Domain Services Active Directory Federation Services Active Directory Lightweight Directory Services (I'm not sure whether I actually need this one - see note below) I'm obviously going to install Enterprise Edition. Question Can I have an AD administration graphical user interface to manage Active Directory on Server Core machine? I would really like to have it, because I'm not so keen to do stuff using power-shell, because I've never managed AD as well, so a GUI would be much more helpful, because I could at least visualize it a bit better and maybe understand AD structures. Note: I'm setting up development environment machine as well and installing Sharepoint Foundation 2010 on in so it would use this AD machine.

  Read the article

• Why is my firewall preventing me from accessing some websites

  - by nosx

  I have an old Belkin router and when I enable the firewall I cannot access certain websites. For example: http://www.avisynth.org With Firewall Enabled: Main page loads and begins to do a meta refresh which never finishes. With Firewall Disabled: Main page loads and the meta refresh completes as normal and I am taken to the wiki page. I have not setup any rules in my firewall that would prevent this site from loading, yet it refuses to load unless I have the firewall disabled completely. My router has a hidden page with advanced settings on it for the firewall which I was able to acccess and take a screenshot of, but I did not want to mess with these values unless I absolutely have to do so: What might be causing this problem and how would I go about fixing it?

  Read the article

• rsyslog - regex trouble

  - by benmccann

  I'm trying to setup the logentries service. If a log entry has a token in it then I would like to send it to api.logentries.com:10000. The token is a guid in the format aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeeeee. Right now I'm doing: # If there's a logentries token then send it directly to logentries :msg, regex, ".*[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}.*" & @@api.logentries.com:10000 I checked the rsyslog debug logs and my regex is not matching, but I can't figure out why or how to fix it: 5245.961161378:7fb79b514700: Filter: check for property 'msg' (value ' fb1c507f-2ede-4d7f-a140-2bd8d56e133 - application - [play-akka.actor.default-dispatcher-1] - Found user: 4fb11ea5e4b00a1aeebe2800') regex '.*[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}.*': FALSE

  Read the article

• Could Not Load Type Microsoft.Build.Framework.BuildEventContext

  Setting up a TeamCity build and got this error: C:\Program Files\MSBuild\Microsoft\VisualStudio\v9.0\TeamData\Microsoft.Data.Schema.SqlTasks.targets(80, 5): error MSB4018: The "SqlSetupDeployTask" task failed unexpectedly. System.TypeLoadException: Could not load type 'Microsoft.Build.Framework.BuildEventContext' from assembly 'Microsoft.Build.Framework, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'. at Microsoft.Build.BuildEngine.TaskExecutionModule.SetBatchRequestSize() at Microsoft.Build.BuildEngine.TaskExecutionModule..ctor(EngineCallback engineCallback, TaskExecutionModuleMode moduleMode, Boolean profileExecution) at Microsoft.Build.BuildEngine.NodeManager..ctor(Int32 cpuCount, Boolean childMode, Engine parentEngine) at Microsoft.Build.BuildEngine.Engine..ctor(Int32 numberOfCpus, Boolean isChildNode, Int32 parentNodeId, String localNodeProviderParameters, BuildPropertyGroup globalProperties, ToolsetDefinitionLocations locations) at Microsoft.Build.BuildEngine.Engine.get_GlobalEngine() at Microsoft.Data.Schema.Build.DeploymentProjectBuilder.CreateDeploymentProject() at Microsoft.Data.Schema.Tasks.DBSetupDeployTask.BuildDeploymentProject(ErrorManager errors, ExtensionManager em) at Microsoft.Data.Schema.Tasks.DBSetupDeployTask.Execute() at Microsoft.Build.BuildEngine.TaskEngine.ExecuteTask(ExecutionMode howToExecuteTask, Hashtable projectItemsAvailableToTask, BuildPropertyGroup projectPropertiesAvailableToTask, Boolean& taskClassWasFound)   The usual searching didnt bring back anything useful, but I figured out that Id missed a dropdownlist in the TeamCity project setup: Originally I was using Microsoft .NET Framework 2.0 for my MSBuild task.  Changing it to 3.5 (as shown above) got me past this error (and on to the next one). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Trying to format drive fails

  - by david

  since I will be doing an internship for which i need to use Windows software, I have decided to ruin my day trying to remove my Ubuntu 12.04, install Win XP SP3 (since the DualBoot theme from ubuntu suggests to first install Windows and then Ubuntu, for problems with the bootloader if you do it the other way around) and then reinstall Ubuntu 12.04 since I would like to keep using it as my primary operating system, using WinXP exclusively for the internship. Other than that, I would like to have a partition for the data, which can be used by both Ubuntu and Windows. So now, I have used the disk utility run from an ubuntu-live cd to format my drive with Master Boot Record (being conscious of the fact that this way I will lose all my data, which I have saved on an external drive before, and that my Ubuntu won't work anymore afterwards), creating partitions for Windows (NTFS), personal data (FAT, since as far as I know both Ubuntu and Windows can deal with this), a Swap partition for Linux, and one partition for Ubuntu (ext4); trying to install Win XP from cd gives me a blue screen, which stops the setup and telling me to remove all recently installed drives and to run CHKDSK. So I thought, that maybe Windows doesn't like pre-partitioned drives for its installation and thus I need to re-format my hard drive in order to have a completely "new" drive, which I can then, during the Windows-installation, partition in order to create the partitions I need. Trying to do this, though, the disk-utility run from the live-CD gives me this warning: Error creating partition table: helper exited with exit code 1: In part_create_partition_table: device_file=/dev/sda, scheme=0 got it got disk committed to disk BLKRRPART ioctl failed for /dev/sda: Device or resource busy I do not understand why it tells me that the hard-drive is busy, because, as stated above, I am doing all this from a live-CD. Thus, my questions are: How can I resolve the error given by the disk utility? Does it make sense to use four partitions in the way mentioned above? And if not so, which partitions should I create? Can I, theoretically, partition my drive from an Ubuntu live-cd in order to create the partitions I want and to install first Windows and then Ubuntu? Thanks for any help, David

  Read the article

• Update KB951847 (3.5 SP1 and Family Update) fails on Windows Server 2003 repeatedly

  - by Ducain

  We have a Win2K3 server that is perpetually stuck on the following update: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86 It fails every time, and I'm at a loss on what to do about it. WHAT I'VE TRIED: Saw an article that said to turn off the update service, rename C:\Windows\SoftareDistribution\ and then restart the update service. Did this, ran the update, and it failed on this same one. I tried to run the update manually at C:\Windows\SoftwareDistribution\Downloads\Install\ and again it fails. Says, "None of the products that are addressed by this software update are installed on this computer. Click Cancel to exit setup." Because of this issue, none of the previous updates will work either. I will give one large pink-glazed donut with sprinkles to anyone who can help me slay this beast.

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• Design and Print Your Own Christmas Cards in MS Word, Part 2: How to Print

  - by Eric Z Goodnight

  Creating greeting cards can be a lot of DIY fun around the holidays, but printing them can often be a nightmare. This simple How-To will show you how to figure out how to perfectly print your half fold card. Last week we showed you how to create a simple, attractive greeting card in Microsoft Word using Creative Commons images and basic fonts. If you missed out, it is still available, and the Word template used here can still be downloaded. If you have already made your Christmas card and are struggling to get it printed right, then this simple How-To is for you Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• How can I share a printer and files on a Windows network over wifi

  - by Jacques

  What is the easiest way to create this setup: WiFi internet router separate in one room. Study room: Laptop with USB printer connected with wifi. My room: Laptop connected with wifi. I want to be able to print from the "My room" laptop to the "Study room" printer, and also share files between them. What is the easiest way to do this? Note, the wireless router needs to be in a separate room for both laptops to be able to connect to it. I've tried configuring homegroups and stuff to do with IP addresses that I found on the internet but have had no success. I'm not an expert with PC's but I've tried hard so there is probably just some trick to do it. If someone can help that will be great.

  Read the article

< Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >