Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 394/715 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >

• Cannot upgrade to Lion using DVD

  - by James

  When I first setup my MBP on 10.6 I made a lot of newb mistakes, and was unable to get Ruby on Rails to install, amongst a lot of other things. Because of this, I decided to backup everything on to a Time Machine HDD and re-install Lion. I had a bunch of problems but managed to sort them out, requiring me to go back to 10.6 from the original disc that came with the MBP. Before I did anything however, I burnt the Lion installer that I got from the App Store to a DVD. Now though, when I try to run it, I get the following: Cannot download additional components. I've managed to download software updates, so I know it can connect to the Apple servers.

  Read the article

• Find DNS server automatically

  - by jdickson

  I've got a Windows 2012 server set up as a domain controller and DNS server in my basement. On my laptop, if I set it to use the IP address of my server as the DNS server, then it works as expected. The problem with that is that I use my laptop outside my home network and I need to switch it back to automatic. Setup is like this: ISP Router running DD-WRT Win 2012 DC/DNS and other network computers How can I have my laptop find the DNS server automatically instead of using my ISP's DNS servers?

  Read the article

• Vmware sphere setting up external network

  - by Tom Beech

  I've just setup vmware vsphere 5 on a remote server (rented dedicated server). I've added my first VPS (centos 5.8) barebones. It's not finding any IP (internal or external) on boot. I've had an extra external IP assigned to my server that I wanted to use on the VPS. I tried editing the eth0 config and adding the IP in there and turning off the DHCP, but it can't find any IP or ping google or do any networking type things. How do I route the IP to my VPS so I can access it remotely?

  Read the article

• Migrate AD DS Server 2003 to Server 2008 R2

  - by user2566483

  I would like to get a couple opinions Found this article online and wanted to know if it is good to follow http://www.msserverpro.com/migrating-active-directory-domain-controller-from-windows-server-2003-sp2-to-windows-server-2008-r2/ Couple of things that need to be done. 1. Move over all active directory settings from old Server 2003 server to new Server 2008R2 2. Setup all users on new server using csvde. csvde -f output.csv -- on old server csvde -i -f output.csv -- on new server Any advice would be greatly appreciated.

  Read the article

• Best Solution for Load Balancing geographically distributed NFS File Access?

  - by DairyKnight

  I'm trying to find an optimum solution for accessing the NFS file share in my company. We have a central file server in North America and has 30GB~50GB of updated data everyday. And it's very slow for our Europe and Asia branches to access directly. Therefore, I'm trying to setup two replicate servers in those continents. I'm currently using rsync, but wonder if there exists a better solution acts more like a distributed RAID, which allows the user to transparently access the file whether synced or not. And user request will be dispatched to remote server if the file is not yet synced. I'm now looking into DRBD, but it seems not to have the functionality of auto-dispatching requests. Does anyone know if there's a better solution?

  Read the article

• How to Fix Mail Server SSL?

  - by Noah Goodrich

  Our mail server was originally setup using self-created certificates, however when those expired and I tried to recreate them, the whole thing just blew up. Since I know it will be important, we are running a Debian server and Postfix. Now I see these errors generated in the mail logs: May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: cannot get certificate from file /etc/postfix/ssl/smtpd.cert May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:02001002:system library:fopen:No such file or directory:bss_file.c:352:fopen('/etc/postfix/ssl/smtpd.cert','r'): May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:354: May 15 08:06:34 letterpress postfix/smtpd[22901]: warning: TLS library problem: 22901:error:140DC002:SSL routines:SSL_CTX_use_certificate_chain_file:system lib:ssl_rsa.c:720: May 15 08:06:34 letterpress postfix/smtpd[22901]: cannot load RSA certificate and key data And when trying to access email from a client like Thunderbird from outside our local network, you receive "Unable to connect to smtp server". Update: I have verified that the file does exist. The current owner of the file is root:root. Does this need to be changed?

  Read the article

• User for MSSQL 2008 Service Accounts

  - by Campo

  I want to create a Domain User that runs the SQL Service Accounts. The reason for this is that I have setup mirroring and MS recommends having the same user (a domain user account) running the services across all the the computers in the configuration to ensure mirroring will work properly. Right now in the test environment I just had them run under my user for simplicity. But now that I know what I am doing I would like to test the configuration more accurately. I am also aware that it makes things much simpler if this user is an administrator. My question is. Should I just create a simple user SQLSERVICEUSER and make it an administrator? Seems a little insecure to me. Anyone have a more elegant solution?

  Read the article

• Do or can robots cause considerable performance issues?

  - by Anicho

  So the question in the title is exactly what I am trying to find out. My case is: At work we are in a discussion with team members who seem to think bots will cause us problems relating to performance when running on our services website. Out setup: Lets say I have site www.mysite.co.uk this is a shop window to our online services which sit on www.mysiteonline.co.uk. When people search in google for mysite they see mysiteonline.co.uk as well as mysite.co.uk. Cases against stopping bots crawling: We don't store gb's of data publicly available on the web Most friendly bots, if they were to cause issues would have done so already In our instance the bots can't crawl the site because it requires username & password Stopping bots with robot .txt causes an issue with seo (ref.1) If it was a malicious bot, it would ignore robot.txt or meta tags anyway Ref 1. If we were to block mysiteonline.co.uk from having robots crawl this will affect seo rankings and make it inconvenient for users who actively search for mysite to find mysiteonline. Which we can prove is the case for a good portion of our users.

  Read the article

• XP Computer won't start (Missing/Corrupt 'System' file) - recently added new hard drive

  - by qwerty2

  Hi all, Pulling my hair out here. I recently replaced my D: 1TB drive (not a system drive) with a new 1.5TB drive. I loaded Windows XP, formatted the new drive and it was showing as working fine, alongside my C: windows system drive. I restart my machine and all of a sudden, Windows doesn't load and instead I get: "Windows could not start beause the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM I don't have the original XP installation CD, although I do have another copy of XP, when I try and boot to it, I get the blue 'STOP' screen after it attempts to load the setup utlity for about a minute. Can someone please help? When I set up my new hard drive as a primary partition did this someone screw up my C: hard drive? Did it perhaps unmount it somehow? Any help would be fantastic. Thanks

  Read the article

• XP Computer won't start (Missing/Corrupt 'System' file) - recently added new hard drive

  - by qwerty2

  Hi all, Pulling my hair out here. I recently replaced my D: 1TB drive (not a system drive) with a new 1.5TB drive. I loaded Windows XP, formatted the new drive and it was showing as working fine, alongside my C: windows system drive. I restart my machine and all of a sudden, Windows doesn't load and instead I get: "Windows could not start beause the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM I don't have the original XP installation CD, although I do have another copy of XP, when I try and boot to it, I get the blue 'STOP' screen after it attempts to load the setup utlity for about a minute. Can someone please help? When I set up my new hard drive as a primary partition did this someone screw up my C: hard drive? Did it perhaps unmount it somehow? Any help would be fantastic. Thanks

  Read the article

• How do I load tmx files with Slick2d?

  - by mbreen

  I just started using Slick2D and learned how simple it is to load in a tilemap and display it. I tried atleast a dozen different tmx files from numerous examples to see if it was the actual file that was corrupted. Everytime I get this error: Exception in thread "main" java.lang.RuntimeException: Resource not found: data/maps/desert.tmx at org.newdawn.slick.util.ResourceLoader.getResourceAsStream(ResourceLoader.java:69) at org.newdawn.slick.tiled.TiledMap.<init>(TiledMap.java:101) at game.Game.init(Game.java:17) at game.Tunneler.initStatesList(Tunneler.java:37) at org.newdawn.slick.state.StateBasedGame.init(StateBasedGame.java:164) at org.newdawn.slick.AppGameContainer.setup(AppGameContainer.java:390) at org.newdawn.slick.AppGameContainer.start(AppGameContainer.java:314) at game.Tunneler.main(Tunneler.java:29) Here is my Game class: package game; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.SlickException; import org.newdawn.slick.state.BasicGameState; import org.newdawn.slick.state.StateBasedGame; import org.newdawn.slick.tiled.TiledMap; public class Game extends BasicGameState{ private int stateID = -1; private TiledMap map = null; public Game(int stateID){ this.stateID = stateID; } public void init(GameContainer container, StateBasedGame game) throws SlickException{ map = new TiledMap("data/maps/desert.tmx","maps");//ERROR } public void render(GameContainer container, StateBasedGame game, Graphics g) throws SlickException{ //map.render(0,0); } public void update(GameContainer container, StateBasedGame game, int delta) throws SlickException{ } public int getID(){return stateID;} } I've tried to see if anyone else has had similar problems but haven't turned up anything. I am able to load other files, so I don't believe it's a compiler issue. My menu class can load images and display them just fine. Also, the filepath is correct. Please let me know if you have any pointers that might help me sort this out.

  Read the article

• Why would the boot screen be displayed on the external monitor?

  - by hegearon

  Why would the boot screen be displayed on the external monitor? This is not really a problem, I'd just like to know the reason behind this. If I boot without an external monitor both the BIOS settings and the boot screen are displayed on the built-in LCD monitor. However, when I boot with a monitor attached, the boot screen and the BIOS settings are displayed on the external monitor. There isn't any setting available regarding this in the BIOS setup (as opposed to my Thinkpad T42 where there is an option regarding this). System specification ASUS K53SV laptop DELL IN2030M monitor (connected via VGA) Windows 7 Enterprise SP1 64bit

  Read the article

• Oracle Virtualbox does not open since upgrade

  - by Langjan

  After upgrading to Ubuntu 12.10, I have been unable to restart my Oracle virtualbox. jan@jan-System-Product-Name:~$ sudo /etc/init.d/vboxdrv setup sudo: /etc/init.d/vboxdrv: command not found Where do I go from here? Can anyone help, please? I tried to install virtualbox via these commands: echo "deb http://download.virtualbox.org/virtualbox/debian $(lsb_release -sc) contrib" | sudo tee /etc/apt/sources.list.d/virtualbox.list wget -q http://download.virtualbox.org/virtu...racle_vbox.asc -O- | sudo apt-key add - sudo apt-get update sudo apt-get install virtualbox-4.2 Attempts to install via package manager vbox would not start. These error reports are received: Because the USB 2.0 controller state is part of the saved VM state, the VM cannot be started.To fix this problem, either install the 'Oracle VM VirtualBox Extension Pack' or disable USB 2.0 support in the VM settings (VERR_NOT_FOUND). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {db7ab4ca-2a3f-4183-9243-c1208da92392} I installed the extension pack, no change in result. I have added myself as user, but the error report says user must be added, when I redo add user, it says user is already added. The following outputs were also received:   Failed to open a session for the virtual machine Nuwe skelm. Implementation of the USB 2.0 controller not found! I cannot access the USB 2.0 setting to disable it. Where do I go from here, please?

  Read the article

• SSH login to Cisco switch using Rancid times out

  - by Lars

  I have a 3560 switch that I have configured to accept SSH logins, and this works fine. However I cannot get Rancid to complete the login process to any of my switches using SSH. I get a timeout error after a minute or so. Telnet logins work fine with the same username and password. Here is my rancid setup in .cloginrc: add user * {myuser} add password * {strongAccessPassword} {strongEnablePassword} add method * ssh telnet Then, when I run bin/clogin 10.10.1.10 I get: # bin/clogin 10.10.1.10 10.10.1.10 spawn ssh -c 3des -x -l myuser 10.10.1.10 ############################################### Please authenticate. ############################################### Password: Error: TIMEOUT reached Again, when I do this using telnet as my preferred mothod in .cloginrc, it works without issue.

  Read the article

• MediaShield RAID 5 is showing up as 760GB when the actual size is 2.7TB

  - by Ilya Volodin

  I just finished setting up Windows 2003 Server on my new server. And I started setting up a RAID 5 for it. I have 4x1TB Hard Drives. From MediaSheild RAID Utility (at boot time) the RAID size is displayed as 2.7TB. Linux also shows it as 2.7TB. However, in Windows, everything (including Windows Disk Management as well as Windows based MediaShield utility) is reporting only 760Gb. I already tried converting partitioning table to GUID from MBR, because I read somewhere that Windows can only handle up to 2TB MBR tables, that didn't help much. Tried searching for partitioning utilities that I could use, but couldn't find anything free. Formatted the disk as NTFS partition from within Linux, it stop showing in Windows all together, even MediaShield windows utility isn't showing at anymore. Windows is installed on a separate 500Gb hard drive, that's setup not to support RAID. Any ideas?

  Read the article

• Back / Forward mouse buttons do not work in VMWare Workstation 6.5 Guest OS

  - by Tim Lara

  I am using a Logitech G9 mouse and running VMWare Workstation 6.5.3 on Vista x64. The guest OS is Win XP, and has the most current version of VMWare Tools installed. Left / right buttons and mouse wheel scrolling work fine in the guest OS, but the back / forward buttons are apparently not recognized. I have tried installing the Logitech software inside the guest OS as well, but it still did not recognize the back / forward buttons. (I didn't really expect this to work since the guest OS doesn't actually see the mouse hardware as a Logitech G9 directly anyway.) I vaguely remember seeing something a while back about editing the virtual machine config file to specify a 5-button mouse rather than the default 3-button setup, but I can't seem to find any specifics on how to do so in the VMWare documentation. Does anyone know if such a workaround exists, or is 5-button mouse functionality just not supported?

  Read the article

• Have programmers at your work not taken up or been averse to an offer of a second monitor?

  - by Chris Knight

  I'm putting together a business case for the developers in my company to get a second monitor. After my own experiences and research, this seems a no-brainer to me in terms of increasing productivity and morale/happiness. One question which has niggled me is if I should be pushing to get all developers onto a second monitor or let folk opt-in (i.e. they get one if they want one). Thoughts on this are welcome, but my specific question relates to a snippet on this site: But when the IT manager at Thibeault's company asked other employees if they wanted dual monitors last year, few jumped at the offer. Blinded by my own pre-judgement, this surprised me. Has anyone else experienced this? I fully appreciate that some people prefer a single larger monitor, but my general experience of researching the web suggests that most programmers prefer a dual (or more) setup. I'm guessing this should be tempered with the thought that those developers who contribute to such discussions might not be considered your average developer who might not care one way or the other. Anyway, if you have experienced the above have you tried to sell the concept of dual monitors to the masses? If everyone just got 2 monitors regardless if they wanted it or not, were there adverse reactions or negative effects? UPDATE: The developers are on a mixture of 17", 22", or 24" single monitors. The desks should be able to accommodate dual 22" monitors as I am proposing, though this will take some getting used to I imagine.

  Read the article

• PCI-e SEALEVEL dual serial card not recognized on Ubuntu 14.04

  - by kwhunter

  New to Ubuntu, running 14.04. I have trouble with the serial port setup, I have a plug-in PCI-e SEALEVEL dual serial card that is not recognized. user1@WSIWORKSTATION2:~$ dmesg | grep tty [ 0.000000] console [tty0] enabled [ 1.577197] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.943326] tty ttyprintk: hash matches [ 17.240880] ttyS4: LSR safety check engaged! [ 17.241589] ttyS4: LSR safety check engaged! [ 17.242354] ttyS5: LSR safety check engaged! [ 17.243058] ttyS5: LSR safety check engaged! [ 17.243918] ttyS6: LSR safety check engaged! [ 17.244485] ttyS6: LSR safety check engaged! [ 17.245195] ttyS7: LSR safety check engaged! [ 17.245830] ttyS7: LSR safety check engaged! [ 17.246554] ttyS8: LSR safety check engaged! [ 17.247191] ttyS8: LSR safety check engaged! user1@WSIWORKSTATION2:~/Desktop/seacom$ lspci -d 135e: -vvv 02:04.0 Bridge: Sealevel Systems Inc Device e205 (rev aa) Subsystem: Sealevel Systems Inc Device e205 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- SERR- Capabilities: However, the manufacturer's drivers won't install: 1. user1@WSIWORKSTATION2:~/Desktop/seacom$ make install ---------------------------------------------------------------- Installing seacom suite. ---------------------------------------------------------------- --Installing utilities-- /usr/bin/ld: skipping incompatible ../../lib/libftd2xx.a when searching for -lftd2xx /usr/bin/ld: cannot find -lftd2xx collect2: error: ld returned 1 exit status make[2]: *** [setusb] Error 1 make[1]: *** [install] Error 1 make: *** [install] Error 1 2. user1@WSIWORKSTATION2:~/Desktop/seaio$ make install ---------------------------------------------------------------- Installing SD suite. ---------------------------------------------------------------- *Compiling SeaIO Library source file: digitalIoDevice.cpp gcc: error trying to exec 'cc1plus': execvp: No such file or directory make[1]: *** [digitalIoDevice.o] Error 1 make: *** [install] Error 1 I was not able to find a solution, so if anyone can help it will be much appreciated. PS Have some troubles with formatting my post, apologies...

  Read the article

• 3rd monitor with Dell Precision 490

  - by Animesh Kumar

  I am trying to go for a 3 monitor setup on my workstation, but need some information before I can invest in a new graphics card and 2 monitors. Would be glad to get some help here: I have a Dell Precision 490 workstation with Nvidia Quadro FX 4500 graphics card (PCI-E 16) on it. It has 2 DVI-D ports that can support 2 monitors upto 2560x1600 resolution. For the third monitor, I was looking at Nvidia NVS 295 card, however I am not sure if it is physically possible to hook another card to the motherboard. Here is the spec of Precision 490: http://www.dell.com/downloads/global/products/precn/en/spec_precn_490_en.pdf Can I attach NVS 295 to it? If not, what options do I have?

  Read the article

• Set up router to vpn into proxy server

  - by NKimber

  I have a small network with a single LinkSys router connected to broadband in US via Comcast. I have a VPN proxy server account that I can use with a standard Windows connection, allowing me to have a geographic IP fingerprint in Europe, this is useful for a number of purposes. I want to setup a 2nd router that automatically connects via VPN to this proxy service, so any hardware that is connected to router 2 looks as though it is originating network requests in Europe, and any hardware connected to my main router has normal Comcast traffic (all requests are originating from USA). My 2nd router is a LinkSys WRT54G2, I'm having trouble getting this configured. Question, is what I'm trying to do even feasible? Should the WRT54G2 be able to do this with native functionality? Would flashing it with DD-WRT allow me to achieve my objectives? Any help/suggestions much appreciated. Neil

  Read the article

• How do i make my existing ubuntu in a bootable installation CD? I tried remastersys but fails with 11.10

  - by YumYumYum

  I need to install 10 PC which has identical setup and hardware. So i was trying remastersys but its failing. How can i resolve this or use something else to achieve this? Updating the remastersys.log cat: /home/remastersys/remastersys/tmpusers: No such file or directory Cleaning up the install icon from the user desktops Removing the ubiquity frontend as it has been included and is not needed on the normal system Calculating the installed filesystem size for the installer Removing remastersys-firstboot from system startup Removing any system startup links for /etc/init.d/remastersys-firstboot ... /etc/rc0.d/K20remastersys-firstboot /etc/rc1.d/K20remastersys-firstboot /etc/rc2.d/S20remastersys-firstboot /etc/rc3.d/S20remastersys-firstboot /etc/rc4.d/S20remastersys-firstboot /etc/rc5.d/S20remastersys-firstboot /etc/rc6.d/K20remastersys-firstboot Making disk compatible with Ubuntu Startup Disk Creator. Creating md5sum.txt for the livecd/dvd Creating /var/tmp/custom.iso in /home/remastersys/remastersys The iso was not created. There was a problem. Exiting Follow up: 1) I am unhappy that there is nothing exist for this to recover/backup 11.10 2) Anyway i have to do it 3) I did not used the popular Clonezilla because it does not offer me iso 4) I downloaded: http://clonezilla-sysresccd.hellug.gr/download.html a) created a bootable CD from that ISO b) booted and followed those steps http://clonezilla-sysresccd.hellug.gr/restore.html c) i got a iso file with everyhing on it including boot-loaders 5) then in another system i used my same CD to restore my image Perfectly worked.

  Read the article

• Inevitable Corporate Bureaucracy

  - by Ahsan Alam

  Top executives of most smaller organizations want their companies to be different from the larger corporations. They want their organizations smaller in size; but bigger in productivity by eliminating red tapes and corporate bureaucracy. When the company is smaller, people often work like firefighters – taking on new business and technology challenges without thinking about any procedures and guidelines. People also tend to wear many hats to accomplish tasks quickly in order to integrate new businesses. For example, software developers in smaller organizations may take on responsibilities of client interactions, requirements gathering, design and development, code deployment, production support, network infrastructure support, database design and maintenance along with countless other duties. In addition, systems in smaller organizations tend to be loosely guarded. So, people often don't follow many procedures in order to setup environments and implement technical projects. It's not uncommon to change code and deploy without anyone realizing. Similarly, business requirements may also get defined in an informal manner without any type of documentation. As the company grows, everything starts to change significantly impacting people and the overall business process. Suddenly, following procedures become extremely important. Consequently, new roles, guidelines and procedures start to emerge. Everything from business process to technology implementation start to become more and more process oriented. Organizations start to define and document steps, invent procedure to track process and systems level changes, and start restricting access to various systems for security reasons. At the same time, as a growing company start doing businesses with larger clienteles, they are automatically forced to abide by all sorts of industry compliance laws. Moreover, growing companies tend to recruit experienced individuals to fill new roles who usually bring their expertise from larger and more bureaucratic organizations.   Despite the best efforts from the top executives, it seems increased number of procedures and guidelines as well as new recruits automatically contribute to the evolution of corporate bureaucracy. Maybe, corporate bureaucracy is an inevitable side effect of a growing organization.

  Read the article

• Connecting a Mac to the office network

  - by user36501

  Hi All, I am busy preparing to start working with a Mac at work - in addition to my old PC. Just wondered, is it difficult to setup the Mac to run on the office network - i.e. does it need any special settings or servers or anything like that? and also printers...can I use the network printer as normal. I am just pottrying to think ahead of any ential issues. Also share drives...will I be able to access share drives and my backups to these shares drives - all a bit daunting! Btw in case you didn't notice I am a Mac Nube lol

  Read the article

• CodePlex Daily Summary for Friday, August 01, 2014

  CodePlex Daily Summary for Friday, August 01, 2014Popular ReleasesQuickMon: Version 3.20: Added a 'Directory Services Query' collector agent. This collector allows for querying Active Directory using simple DirectorySearcher queries.Grunndatakvalitet: Initial working: Show Altinn metadata in Excel. To get a live list you need to run the sql script on a server and update the connection string in ExcelMultiple Threads TCP Server: Project: this Project is based on VS 2013, .net freamwork 4.0, you can open it by vs 2010 or laterEssence#: Philemon-2 (Alpha Build 18): The Philemon-2 release fixes bugs, most of which have to do with the binding of .Net assemblies. Configuration profiles have been added in order to help solve some of the .Net assembly binding issues. A configuration profile is persistently stored as a folder in the filesystem. It must be located in the folder %EssenceSharpPath%\Config. The folder name must use ".profile" as its file extension. A configuration profile folder may (optionally) contain one or more files--each with its own form...DataBind: DataBind 1.0: - Efficiency ImprovedConsole Progress Bar: ConsoleProgressBar-0.3: - Validate ProgressInPercentageSpace Engineers Server Manager: SESM V1.10: V1.10 - New auto update system ! You won't miss any SE Update now ^^ To learn more : https://sesm.codeplex.com/wikipage?title=Activating%20the%20auto%20update%20system - Moved the serve-wide configuration options to an other file than web.config. It should solve the "my parametters are errased by each SESM update" ! Warning ! If you upgrade from any previous version, you will need to copy-pase your parameters from your old web.config into the new SESM.config (this file is generated by acc...Accesorios de sitios Torrent en Español para Synology Download Station: Pack de Torrents en Español 6.0.0: Agregado los módulos de DivXTotal, el módulo de búsqueda depende del de alojamiento para bajar las series Utiliza el rss: http://www.divxtotal.com/rss.php DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Recaptcha for .NET: Recaptcha for .NET v1.5: What's NewMinor bug fixes Support for legacy .NET framework 4.0 and ASP.NET MVC 4. Support for .NET Framework 4.5.1.Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).SSIS Connector for Sharepoint Online: Sharepoint_Online_ConnectorsV2.3.5: V2.3.5 Removed validation for user name where it was accepting user name with only ".com" V2.3.1 Added support for column with string array type. (For source only) V2.3 Added support for delete operation. just map ID columns and choose operation type as "Delete" Any other Operation Type will be taken as Insert\Update MultiUser type will be taken as User field and single user will be added, still figuring out how to add multi user field (whatever available on internet not helping :( ) V2.2 ...Artezio SharePoint 2013 Workflow Activities for VS & Actions for Designer: SharePoint Designer 2013 custom workflow actions 1.0: SharePoint Designer 2013 custom workflow actions that work with permissions. Add Role Assignment Add Role Assignments Delete Role Assignments Get Role Definition Id Get Role Definition Id By Role Type Id Reset Role Inheritance Artezio SharePoint Consulting & DevelopmentVG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityTEBookConverter: 1.2: Fixed: Could not start convertion in some cases Fixed: Progress show during convertion was truncated Fixed: Stopping convertion didn't reset program titleNew Projects.NET to C/C++ Interop Sample: Reference projects that demonstrate how to invoke C/C++ code from .NET using C#.Aircraft Guidance Systems: Software for RC model control and navigationDNN Upgrade Wizard: Provides a simple method for upgrading a DNN siteDrop and Create indexes SSIS Task: This is a simple SSIS Control Flow Task which can be used to drop and re-create all non-primary key indexes associated with specified table.Dynamics CRM 2013 Global Advanced Find: Dynamics CRM 2013 Global Advanced Find adds a button to the global navigation allowing users to launch an advanced find window from anywhere in the system.itsanewproject: sdlfjsldjfJNMSJW: hahaOmni Kits: A library tend to help in projects for any purpose while keeping small.Phase1Week1: Learning how to post, publish, and patch my commits to CodePlex with homework using bootsrap and font awesome.PL_Last1: Pll1Tabletoparmy: Tabletoparmy ist ein Tool um Tabletop Miniaturen zu Verwalten. Aktuell gibt es nur die Möglichkeit ein X-Wing Turnier zu verwalten.TalesAndTiles: Tile based game developed with Microsoft XNA Framework 4.0??????: ?????????

  Read the article

• In a multi-domain forest, what EXACTLY happens when some, but not all, of the Infrastructure Masters are on Global Catalogs?

  - by MDMarra

  There are plenty of TechNet articles, like this one that say that phantom object don't get updated if an Infrastructure Master is also a Global Catalog, but other than that there isn't a lot of in depth information on what actually happens in this configuration. Imagine a configuration like this: |--------------| | example.com | | | | dedicated IM | |--------------| | | | |-------------------| | child.example.com | | | | IM on a GC | |-------------------| Where child has two DCs that are both global catalogs, meaning that the Infrastructure Master role is on a GC. And, example has three DCs with the Infrastructure Master role on a DC that is not a GC. I understand that it's usually best to just make everything a GC and not have to worry about this sort of thing, but assuming that's not the case - what is the exact error behavior that can be expected from a setup like this, and which domain(s) would this behavior manifest in? The child or the parent?

  Read the article

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >