Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 396/985 | < Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >

• How to start a service at boot time in ubuntu 12.04, run as a different user?

  - by Alex

  I have a server ClueReleaseManager which I have installed on a Ubuntu 12.04 system from a separate user (named pypi), and I want to be able to start this server at startup. I already have tried to create a simple bash script with some commands (login as user pypi, use a virtual python environment, start the server), but this does not work properly. Either the terminal crashes or when I try to ask the status of the service it is started and I am logged in as user pypi ...? So, here the question: What are the steps to take to make sure the ClueReleaseManager service properly starts up on boot time, and which I can control (start/stop/..) during runtime, while the service is running from a user pypi? Additional information and constraints: I want to do this as simple as possible Without any other packages/programs to be installed I am not familiar with the Ubuntu 12.04 init structure All the information I found on the web is very sparse, confusing, incorrect or does not apply to my case of running a service as a different user from root.

  Read the article

• How to route broadcast packets from machine with two network interfaces on same subnet

  - by Syam

  I run RHEL 5 and have two NICs on one machine connected to the same subnet: eth0 192.168.100.10 eth1 192.168.100.11 My application needs to receive and transmit UDP packets (both unicast & broadcast) via these interfaces. I've found the way to handle the ARP problem and I've added routes to handle the routing problem: ip rule add from 192.168.100.10 lookup 10 ip route add table 10 default src 192.168.100.10 dev eth0 (and similarly, table 11 for eth1) The problem is that only unicast packets gets routed properly. Broadcast packets always go out through eth0. I tried removing the rule for 192.168.100.0 & 192.168.100.255 from table 255 and adding them to my tables. But then I see ARP requests being given out for packets to 192.168.100.255 (obviously, no nodes respond and nobody gets any data). Due to several techno-political issues, I'm stuck with this configuration and can't change subnets or try something different. I've tried SO_BINDTODEVICE and it works, but I'd prefer a solution that doesn't need my application to run as root. Is there a way to get this working? Any help is highly appreciated.

  Read the article

• Users in ubuntu; Cant figure it out

  - by Camran

  I am the only one who will have access to my website. Just installed my VPS and managed to get most stuff working. However, stuck on the "members" part. Currently, everything has been done as "root". I have read posts that I should create a user, because root isn't ideal. I have found thousand guides on how to create a user, but now what to do next. 1- Should I create a user with adduser username and then add the user to a group? But which group? 2- And will the user then be able to do everything as I have done logged on as "root"? 3- And somebody plz explain what "sudo" has to do with this? (if anything at all) Thanks

  Read the article

• Adding user to chroot environment

  - by Neo

  I've created a chroot system in my Ubuntu using schroot and debrootstrap, based on minimal ubuntu. However whenever I can't seem to add a new user into this chroot environment. Here is what happens. I enter schroot as root and add a new user.(Tried both adduser and useradd commands) The username lists up in /etc/passwd file and I can 'su' into the new user. So far so good. When I log out of schroot, and re-enter schroot, the user I created has vanished!! There is no mention of that user in /etc/passwd either. How do I make the new user permanent?

  Read the article

• Rebuilding LVM after RAID recovery

  - by Xiong Chiamiov

  I have 4 disks RAID-5ed to create md0, and another 4 disks RAID-5ed to create md1. These are then combined via LVM to create one partition. There was a power outage while I was gone, and when I got back, it looked like one of the disks in md1 was out of sync - mdadm kept claiming that it only could find 3 of the 4 drives. The only thing I could do to get anything to happen was to use mdadm --create on those four disks, then let it rebuild the array. This seemed like a bad idea to me, but none of the stuff I had was critical (although it'd take a while to get it all back), and a thread somewhere claimed that this would fix things. If this trashed all of my data, then I suppose you can stop reading and just tell me that. After waiting four hours for the array to rebuild, md1 looked fine (I guess), but the lvm was complaining about not being able to find a device with the correct UUID, presumably because md1 changed UUIDs. I used the pvcreate and vgcfgrestore commands as documented here. Attempting to run an lvchange -a y on it, however, gives me a resume ioctl failed message. Is there any hope for me to recover my data, or have I completely mucked it up?

  Read the article

• crontab: question about a special case of the dash character in the time field spec

  - by mdpc

  In the SuSE /etc/crontab the entry to run the cron.{hourly,daily,monthly,weekly} scripts is coded as: -*/15 * * * * root test -x /usr/lib/cron/run-crons && /usr/lib/cron/run-crons /dev/null 2&1 Notice that the very first character of the specification is a dash character (-), and this is NOT a typo. Can somebody explain what the time spec '-*/15' means? BTW, the stuff seems to be running fine. Thanks

  Read the article

• compressing dd backup on the fly

  - by Phil

  Maybe this will sound like dumb question but the way i'm trying to do it doesn't work. I'm on livecd, drive is unmounted, etc. When i do backup this way sudo dd if=/dev/sda2 of=/media/disk/sda2-backup-10august09.ext3 bs=64k ...normally it would work but i don't have enough space on external hd i'm copying to (it ALMOST fits into it). So I wanted to compress this way sudo dd if=/dev/sda2 | gzip > /media/disk/sda2-backup-10august09.gz ...but i got permissions denied. I don't understand.

  Read the article

• How can I avoid SSH's host verification for known hosts?

  - by shantanuo

  I get the following prompt everytime I try to connect a server using SSH. I type "yes", but is there a way to aovid this? The authenticity of host '111.222.333.444 (111.222.333.444)' can't be established. RSA key fingerprint is f3:cf:58:ae:71:0b:c8:04:6f:34:a3:b2:e4:1e:0c:8b. Are you sure you want to continue connecting (yes/no)?

  Read the article

• How can I register a custom protocol with xdg?

  - by julien

  I've been struggling this morning trying to associate an application with a custom protocol, namely emacsclient and org-protocol. I'm calling this protocol from a webbrowser bookmarklet, and I get the following behaviour : In chromium, the "Launch Application" dialog comes up, and calls xdg-open org-protocol://... which ends up firing a new chromium frame. In firefox, I've tried setting network.protocol-handler.app.org-protocol to an empty string or my emacsclient path, anyhow I get the following error message : "Firefox doesn't know how to open this address, because the protocol (org-protocol) isn't associated with any program" without even showing any external application selection dialog. I'm not using any desktop environment, so I need to make this work strictly with xdg, however, despite reading the shared mime info spec etc, I still can't fathom a working configuration.

  Read the article

• View Script Over SSH?

  - by user74781

  A friend, using a remote machine, ran a script that SSHed to my machine, and ran the following python script that resides on my machine: while (1): ....print "hello world" (this script simply prints 'hello world' continuously). I am now logged in to my machine. How can I see the output of the script my friend was running? if it helps, I can 'spot' the script my friend is using: me@home:~$ ps aux | grep justprint.py **friend 7494 12.8 0.3 7260 3300 ? Ss 17:24 0:06 python TEST_AREA/justprint.py** friend 7640 0.0 0.0 3320 800 pts/3 S+ 17:25 0:00 grep --color=auto just what steps should I take in order to view the "hello world" messages on my screen?

  Read the article

• Effects of internet connection speeds on server queries

  - by SephMerah

  Can my internet connection significantly effect queries run on phpmyadmin? I am currently 18 down and 30 up. I switched internet connections today and noticed a deep drop in query performance. The query that I am running is SELECT * FROM table. Simple. The table has one row of data. The MySQL server is on the same server as everything else. It is a VPS. Godaddy hosts. I dont have any other information. Centos 6.3 MySQL 5.1 PhpMyAdmin 3.4 Okay used google tools to inspect the XHR going out and coming in and this is what it reported. {"success":true,"message":"<div class=\"success\">Your SQL query has been executed successfully ( Query took 0.0033 sec )<\/div>","sql_query":"<div id=\"result_query\" align=\"\">\n<div class=\"success\">Your SQL query has been executed successfully ( Query took 0.0033 sec ) SNIP..................."}. So apparently my server is fine. The strange thing is though.. The returned XHR comes back exactly as soon as I execute the query on the page. It comes back within less than a second. Why PhpMyadmin does not report the change immediately. I am going to try a re-install.

  Read the article

• Problem when trying to install Debian Lenny

  - by kasperasky

  I am installing Debian Lenny, but when I boot it, it stops at this point: Please wait kernel loading... It doesn't continue past this point. What should I do?

  Read the article

• Server not responding to SSH and HTTP but ping works

  - by yes123

  Hello guys, I requested an hard reboot because none of ssh and http worked. Ping worked normally. Which logs should i check to understand what was the problem? Thanks! (debian 6 on lamp) Edit: my memory and swap: Mem: 4040068k total, 1114920k used, 2925148k free, 109212k buffers Swap: 1051384k total, 0k used, 1051384k free, 283820k cached 4 GB ram (and more than 1TB of HDD) The cause is from 2 days ago: look how the usage of swap goes +60% in less than 10hours My control panel reports this as top 5 memory usage process: If every apache2 process is 190MB large that sux because IF i do TOP i have 262 sleeping process most of them are apache2! My apache mpm_prefork settings are: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 ServerLimit 1500 MaxClients 1500 MaxRequestsPerChild 2000 </IfModule> KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4

  Read the article

• System time is off in Fedora

  - by NoClue

  I have a desktop PC with Fedora, Ubuntu and Windows installed and grub used for multibooting. But time in Fedora is always 5 hours behind. If I change the time in Fedora, then Windows and Ubuntu will be 5 hours ahead of the current time. I don't understand how to fix it. Any ideas? All the timezone settings in Fedora, Ubuntu and Windows are the same.

  Read the article

• Anyone know a good web-based file upload package?

  - by Ted Wexler

  Basically, what I'm looking for is a place for either one of our end users to be able to upload a file to this package, after either receiving a code from one of our support engineers or vice-versa(our engineers upload a file and send a code/link/something to end user) I've spent a bunch of time googling this, I found this: http://turin.nss.udel.edu/programming/dropbox2/, but the code there scares me, and it also doesn't render properly using PHP 5.3(uses short tags, who knows what else.) Does anyone have any recommendations?

  Read the article

• how to figure out why sites on my server aren't loading

  - by Derek

  I seem to randomly receive "page cannot load, cannot connect to server" errors for sites on one of my servers. when this happens, it seems to only happen on certain IPs or IP ranges at a time. I say this because while I'll get the error from my home laptop I'll be able to access the site fine from my work computer or from an offsite VPS. DNS records should already be fully propagated as these records were updated months ago. I have no idea how to diagnose what's going on. Is there a tool in cpanel or outside on the web that can help me figure out what's going on?

  Read the article

• Ubuntu list of packages installed

  - by becomingGuru

  I am moving to a new laptop with Ubuntu Lucid from an old laptop that has Ubuntu Karmic. I want to look at the list of all the packages and selectively install them all on the new laptop. What is the best method to go about it. Thanks in advance.

  Read the article

• The best way to hide data Encryption,Connection,Hardware

  - by Tico Raaphorst

  So to say, if i have a VPS which i own now, and i wanted to make the most secure and stable system that i can make. How would i do that? Just to try: I installed debian 7 with LVM Encryption via installation: You get the 2 partitions a /boot and a encrypted partition. When booting you will be prompted to fill in the password to unlock the encryption of the encrypted partition, Which then will have more partitions like /home /usr and swapspace which will automatically mount. Now, i do need to fill in the password over a VNC-SSL connection via the control panel website of the VPS hoster, so they can see my disk encryption password if they wanted to, they have the option if they wanted to look at what i have as data right? Data encryption on VPS , Is it possible to have a 100% secure virtual private server? So lets say i have my server and it is sitting well locked next to me, with the following examples covered bios (you have to replace bios) raid (you have to unlock raid-config) disk (you have to unlock disk encryption) filelike-zip-tar (files are stored in encrypted archives) which are in some other crypted file mounted as partition (archives mounted as partitions) all on the same system So it will be slow but it would be extremely difficult to crack the encryption. So to say if you stole the server. Then i only need to make the connection like ssh safer with single use passwords, block all incoming and outgoing connections but give one "exception" for myself. And maybe one for if i somehow lose my identity for the "exeption" What other overkill but realistic security options are available, i have heard about SElinux?

  Read the article

• How can one associate a 3ware controller with the corresponding /dev/tw?? device?

  - by barbaz

  I have a few 3ware RAID controllers installed in a system. Is there any way to figure out the mapping between the following identifiers, each describing in a way the very same RAID controller? The tw_cli reported controller id (e.g. c0,c1,c2,...) The corresponding device nodes that allow smartctl access via the 3ware driver (e.g. /dev/twa0, /dev/twa1, /dev/twl0) The block device presented to the system representing a RAID unit (/dev/sda, /dev/sdb,...)

  Read the article

• Can a named (bind) crash make a server unreachable?

  - by giorgio79

  My server recently became unreachable, and after restart a named error was the last line I found in /var/log/messages before restart: Jun 26 00:15:06 host named[1303]: error (network unreachable) resolving 'dlv.isc.org/DNSKEY/IN': 2001:500:71::29#53 Jun 26 06:38:55 host kernel: imklog 5.8.10, log source = /proc/kmsg started. Jun 26 06:38:55 host rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1294" x-info="http://www.rsyslog.com"] start Jun 26 06:38:55 host kernel: Initializing cgroup subsys cpuset Can a named crash make a server unreachable? I doubt it, as I assume I should still be able to login with ssh via IP, but the server did not respond...So, I am trying to make heavy guesses here.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Not able to connect to internet in RHEL 5

  - by chankey007

  I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

  Read the article

• Where does netstat get the process name?

  - by tjameson

  I am developing a node application and there is an option to set the process title (process name). This only sets it in some tools (like ps and top), but not in htop or netstat. I found this article that explained how most applications do it, but it doesn't change in netstat. That lead me to wonder where those programs are getting the process name. Would they be getting it from /proc/##/cmdline? (## being the PID of the process) I figure messing with things in /proc is a bad idea (and probably not possible), so if this is where those programs are getting it, is there a way to change it?

  Read the article

• Can't access individual samba shares

  - by Richard Maddis

  I've just installed CentOS and I'm configuring Samba. I have a share with the following in the smb.conf file: [storage] comment = Main storage for all use path = /share public = yes browseable = yes writable = yes printable = no write list = bob root create mask = 0775 guest ok = yes available = yes In Windows Explorer, I can reach the page listing all the shares on the server, but I click on the shares themselves, I get an error saying that the folder cannot be found. I have verified that the folder /share exists and I've also given it 777 permissions so it cannot be due to permissions. What is causing this? I can post more config files if necessary.

  Read the article

• sed comand - remove virus from wordpress [duplicate]

  - by EliaszKubala

  This question already has an answer here: How do I deal with a compromised server? 12 answers I have malicious code in every php file. This malicius code is auto paste at the beginning of file. I want to remove this with UNIX command from console. This is malicious code: <?php $guobywgpku = '..... u=$bhpegpvvmc-1; ?> I write this RegExp, "/<\?php \$guobywgpku.*\?>/m" and this RegExp work. I tested it here. The problem is, write command which remove this malicious code from every php file on the sever. Please Help me. Now i have something like this. sed "/<\?php \$guobywgpku.*\?>/m" index.php

  Read the article

< Previous Page | 392 393 394 395 396 397 398 399 400 401 402 403  | Next Page >