Search Results

Search found 12829 results on 514 pages for 'hard'.

Page 398/514 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Give back full control to a user on a disk from another computer

  - by Foghorn

  I have my friend's hard drive mounted externally. After messing with the permissions with TAKEOWN so I could fix some viruses, I have full control over their drive. The problem is, now it's stuck in a "autochk not found" reboot sequence. I think the problem is that the boot sector is invisible to the drive now. So my question is, How can I use icacls to give back the full ownership, when the user I am giving it to is not on my machine? I ran the TAKEOWN command from my windows 7 laptop, their machine is a windows xp Professional with three partitions, I only altered the one that has the boot sector. Here is the permissions that icacls shows: (Where my computer is %System% my username is ME, and the drive is E:\ C:\Users\ME icacls E:\* E:\$RECYCLE.BIN %System%\ME:(OI)(CI)(F) Mandatory Label\Low Mandatory Level:(OI)(CI)(IO)(NW) E:\ALLDATAW %System%\ME:(I)(OI)(CI)(F) E:\alrt_200.data %System%\ME:(OI)(CI)(F) E:\AUTOEXEC.BAT %System%\ME:(OI)(CI)(F) E:\AZ Commercial %System%\ME:(I)(OI)(CI)(F) E:\boot.ini %System%\ME:(OI)(CI)(F) E:\Config.Msi %System%\ME:(I)(OI)(CI)(F) E:\CONFIG.SYS %System%\ME:(OI)(CI)(F) E:\Documents and Settings %System%\ME:(I)(OI)(CI)(F) E:\IO.SYS %System%\ME:(OI)(CI)(F) E:\Mitchell1 %System%\ME:(I)(OI)(CI)(F) E:\MSDOS.SYS %System%\ME:(OI)(CI)(F) E:\MSOCache %System%\ME:(I)(OI)(CI)(F) E:\NTDClient.log %System%\ME:(OI)(CI)(F) E:\NTDETECT.COM %System%\ME:(OI)(CI)(F) E:\ntldr %System%\ME:(OI)(CI)(F) E:\pagefile.sys %System%\ME:(OI)(CI)(F) E:\Program Files %System%\ME:(I)(OI)(CI)(F) E:\RECYCLER %System%\ME:(I)(OI)(CI)(F) E:\RHDSetup.log %System%\ME:(OI)(CI)(F) E:\System Volume Information %System%\ME:(I)(OI)(CI)(F) E:\WINDOWS %System%\ME:(I)(OI)(CI)(F) Successfully processed 22 files; Failed processing 0 files C:\Users\ME

  Read the article

• Can't Get Mac Mini to turn on - no screen, no beep, only the fan, power light, and optical drive noi

  - by pibyers

  I have an Intel-based Mac mini mid-2007 (Model A1176). This is the computer my kids use so I don't use it regularly. The computer had been working fine until one day my kids told me that it no longer works. The computer will not boot up. When I turn it on the fan turns, the white power light in the front turns on, and there is a sound that appears to be from the optical drive (rather than hard drive). I don't get anything to the monitor, nor do I get any dings or other start up sounds from the computer. Here is what I've tried thus far to no avail: 1) Swapped out the monitors early on since I figured that was my weak link - no change 2) Reset the PMU - no change 3) Tried to boot up from the System Disk - The mini loaded the dvd into the drive, but nothing else (I can't eject the disk so I can put it back) 3) Start up the computer in target mode connected to another mac - I tried this too, but I never received a chime or the disk show up on the other mac. I'm about out of ideas apart from scraping the computer. Does anyone have any ideas that I can try? Again, nothing has been done to the computer in at least 6 months when I upgraded the RAM. I'm also still on Leopard. Thanks.

  Read the article

• Getting a TTY in a Connectback Shell

  - by Asad R.

  I'm often asked by friends to help with small Linux problems, and more often than not I'm required to login to the remote system. Usually there are a lot of issues with making an account and logging in (sometimes the box is behind a NAT device, sometimes SSHD isn't installed, etc.) so I usually just ask them to make a connect-back shell using netcat (nc -e /bin/bash ). If they don't have netcat I can just ask them to grab a copy of a statically compiled binary which isn't that hard or time consuming to download and run. Though this works well enough for me to enter simple commands, I can't run any apps that require a tty (vi, for example) and can't use any job control functions. I managed to bypass this issue by running in.telnetd with a few arguments within the connect-back shell that would assign me a terminal and drop me to a shell. Unfortunately in.telnetd isn't usually installed by default on most systems. What's the easiest way to get a fully functional connect-back terminal shell without requiring any non-standard packages? (A small C program that does the job would be fine as well, I just can't seem to find much documentation on how a TTY is assigned/allocated. A solution that doesn't require me to plough through the source code for SSHD and TELNETD would be nice :))

  Read the article

• Why are folders disappearing in Windows XP?

  - by XenoFoxx

  I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the Windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and Windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

  Read the article

• DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

  - by Kev

  I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

  Read the article

• Error when attempting to do a differential or incremental backup of Exchange using ntbackup

  - by voon

  Hi folks, We're running Small Business Server 2003 here. I was reviewing our backup procedures lately and noticed in the ntbackup logs that the differential backups of Exchange were failing with the error: (SERVERNAME)\Microsoft Information Store\First Storage Group is not a valid drive, or you do not have access. A quick search of google found this MS KB article: http://support.microsoft.com/kb/555613 However, both of the suggested fixes don't to apply to our problem. First solution is to make sure the backup media is formatted and has adequate space. Well, our backup target is a 1 TB external hard drive with about 600 gigs of free space. (A full backup of our Exchange DB is currently around 5 GB) The second suggested fix is to "perform a full backup before trying to do incremental". And again, that can't it because we are doing full backups twice a week. There are no errors in the application log, just entries for ntbackup starting and ending. I've also tested doing an differential & incremental backup onto the server's internal drive, which unsurprising still did not work. I could get around this problem by always doing a full backup of Exchange but I kind of like the idea of being space efficient with doing differential backups. Anyone got any ideas?

  Read the article

• Ubuntu 12.04 froze during update, won't boot

  - by Cichol

  I've recently installed Ubuntu 12.04 on my laptop, and every time i tried to update it, it would freeze for a few seconds, and tell me that the updates could not be downloaded. After many, many tries I managed to get them downloaded, but then in the middle of installing them, it froze. Completely. No mouse movement, no blinking lights, no nothing. After a few hours of letting it sit there, I finally hit the power button to do a hard reset, and now when I select Ubuntu on the boot screen (Dual-boot with Windows 7), I get a blank purple screen, and then nothing. Another freeze. I've tried getting into the console, but no command I input has any visible effect. I have a ton of music stored on the partition it's in, so I'd really rather not have to reinstall. My specs, to the best of my knowledge: Clevo Corp model B7130 (Sager custom) CPU: Intel Core i5 @ 2.53gHz (4 CPUs) Graphics Card: Nvidia GeForce 425m 4096 MB RAM Drivers: Whatever comes with the download of 12.04. As a side-note, I installed Ubuntu via the Windows Installer program (wubi). Does that make a difference?

  Read the article

• script calling script as other user

  - by viktor tron

  Using CentOs, I want to run a script as user 'training' as a system service. I use daemontools to monitor the process, which needs a launcher script that is run as root: : #!/bin/bash exec >> /var/log/training_service.log 2>&1 setuidgid training training_command This last line is not good enough since for training_command, we need environment for training user to be set. : su - training -c 'training_command' gives 'standard in must be tty' as su making sure tty is present to potentially accept password. I know I could make this disappear by modifying /etc/sudoers a la Bash & 'su' script giving an error "standard in must be a tty" but i am reluctant and unsure of consequences. : runuser - training -c 'training_command' gives runuser: cannot set groups: Connection refused. I found no sense or resolution to this message. I am stuck. Is this something so hard to achieve? I appreciate all insight and guidance to best practice.

  Read the article

• Why is my Compaq NC8430 laptop so darned HOT ?

  - by Cheeso

  For a long time I've had a Compaq nc8430 laptop. It's nearly 3 years old now. Originally shipped with WinXP, but I installed Vista on it. From the very start it was not a good experience. This thing has one of those "stickpoint" mice, which I like. After a while, I noticed that the computer was generating lots and lots of heat. So much heat, that the stickpoint bumper would melt and disintegrate. Normally I would expect heat if the CPU was working hard, but even when the CPU was idle, the computer was hot. Much too hot to keep on my lap. Turns out this is not an uncommon problem. I installed the HWmonitor tool, and found that the CPU temp was 82C when it was plugged in - pretty darn hot. And because the temp was so high, the fan never turned off, so the laptop was as loud as a jet engine, always. If I unplugged it from A/C power, the screen would dim and the temperature would decrease, and the fan noise would lessen, but still, it was too loud. It's totally unusable. What is the problem?

  Read the article

• Lenvo B450 won't boot on battery only?

  - by Mywiki Witwiki

  We bought a Lenovo B450 laptop almost a year ago. It comes with a NVIDIA GEFORCE with CUDA graphics and so the battery life is terrible. It will only last 1:30 hours max. We try to run it on battery as much as possible but because the battery life is short sometimes we can't notice that the battery is so low until the computer blacks out. Because of the short battery life, the laptop is always plugged on AC power. One night the computer froze. Because it was already late, I just reset the laptop my pressing the power button for 10 seconds. The laptop shut off but I did not bother restarting it. The next morning, the laptop won't turn on on battery only. It will only turn on on AC power. The computer instantly shuts down(improperly) once the adapter is removed. But the battery was at 100% then. Now it is slowly losing charge (currently at 74%). The battery indicator says, "Plugged in, not charging". I want to bring the laptop to school but I can't because it won't be portable at all. Just to summarize it all: 1) The laptop suffered some blackouts already. 2) The laptop was on AC power most of the time. 3) When the computer froze, it was reset (hard shutdown). 4) The laptop won't boot with battery only since then. 5) The laptop will shutdown instantly when AC adapter is removed. 6) The battery won't charge and is gradually losing charge. ======================= UPDATE ============================= We got the battery replaced. Unfortunately, it delivers only 2 hours max of power.

  Read the article

• Linux Mint 13 is not booting on dual boot computer

  - by Brian

  thanks in advance for your time. I have 2 hard drives in my computer a 300 GB drive which is my primary drive for windows 7 and a 1.5 TB drive that I'd used for storage. When I got it I partitioned 500 GB for use in Linux. So, I created a bootable USB and clicked the "Install by Current Operating System" option from Mint. It installed it to the free 500 GB like I'd hoped it would. Now, I can't get it to boot though. I've tried using EasyBCD to create the boot entry and it hangs on a black screen. Thanks. EDIT @ Ryhuk It presents a menu with two options 1) Windows and 2) Mint. This was a menu I created with easyBCD. When I select option 1 it boots to windows fine. When I select option 2 it hangs on a black screen with just a white bar flashing (Can't remember what its called, it marks the current cursor location on a text field) and won't respond to any key presses but alt ctrl del.

  Read the article

• Apache process consuming all memory on the server

  - by jemmille

  I have an apache process that suddenly appears on a particular server. When it shows up it starts consuming memory at a very rapid rate, then moves on to all the swap. In all it consumes about 11GB (including swap) of memory and the server eventually becomes unresponsive. The load on the server is under 1 at all other times. The process runs as nobody and I am having a hard time tracking down the source. If i run an strace on the process and all it did was continuously dump out mprotect over and over again If i run lsof -p <pid>, I get this, but only sometimes: httpd 19229 nobody 152u IPv4 175050 crawl-66-249-67-216.googlebot.com:62336 (CLOSE_WAIT) httpd 19229 nobody 153u IPv4 179104 crawl-66-249-71-167.googlebot.com:58012 (ESTABLISHED) As long as I catch it, I can kill the process and the server almost immediately stabilizes. I have on site on the server that is getting a few thousand hits a a day that I think might be the source, but I still can't find the exact reason. Also, this is a cPanel server and I have upcp'd the server, rebuilt apache with easy apache, and rebuilt httpd.conf. It is not spawing any related processes, meaning I can find any php, mysql, cgi, etc. processes that relate to this process. It's just a loner process that balloons fast and consumes ever last MB of memory. This is on a XenServer 5.6 based VM. No other servers in the cluster are having this issue.

  Read the article

• Tablet as Car Computer

  - by luxurychair

  Okay, so forward this off to the right place if this isn't the right place to ask this question. I want to use a tablet computer as a car-computer. Minimum features would be to run my music (through iPod, Pandora, whatever I want) and GPS Navigation, watch TV or movies while I'm parked waiting for people, and the hard one: it needs to answer my phone calls with a pleasant interface much like in-dash systems do. It needs to detect that my phone is ringing in my pocket and provide an on-screen answer/ignore and then route the audio through the cars speakers. It would be nice to dial out and have address book access, but that is somewhat secondary. I have an iPhone myself and I figured that an iPad with 3G might make a good system for this - but I'm open to other options if an iPad can't do everything I need. I'm willing to write code, and I'm willing to jailbreak one or both devices. I haven't done much work in Obj-C, but I'm not opposed to learning a new language for this project. It's self enrichment for the most part, as I'm sure I can buy an indash entertainment system for less. Does anyone have experience with the iPhone/iPad SDK that can tell me whether or not it would be possible to get it an iPad to answer my calls in the car? What about an Android tablet? (that Adam looks promising, too).

  Read the article

• How to "swap in" again memory from page file to physical memory in Windows at once (like linux swap-off)

  - by Arnout

  Is there a way to swap back in (to put back all the memory data that was put into the page file (or swap, whatever you prefer)) memory on a windows PC? On linux, one can easily do this with the swapoff /dev/sdaX, where X is the swap partition. On windows, it seems to ask me to reboot each time.. The reason I'd like to do this, is that, even though swapping out the data to the swap file allows me to play a resource-hungry game fully in physical ram, when I stop the game, all the rest of my programs run slow. This is or course normal; all the programs were pushed into the page file because my RAM was too small, and all memory access to those programs after gaming bumps into hard page faults, with major delays and some frustration as a consequence. However, that frustration could easily be avoided, by simply allowing the PC to copy all data back into the physical memory for a minute or so, and then resume working on a fast working PC! (rather than having to endure the slowness -while- working) Thanks in advance for any advice on this! Kind regards

  Read the article

• Intel Atom overheating in ASUS EEE Box 1501P

  - by Sergey L.

  I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

  Read the article

• Error occurs when Win 7 opens

  - by user1708748

  I have an HP customized laptop barely a week old. Since yesterday it has given me an error message while opening Windows- every time. it gives error code (0x40000015) refers to an exception at location (0x0033fa4d). I have 64 bit Win 7 and had been transferring files. And installing programs. 8 GB Ram 650 gb hard drive. Not sure which program caused this. Q's that I've seen with this error code all say it occurs while shutting down. A search re. error code told me to use a removal tool. When I downloaded the tool,I got a message saying it is not compatible with Windows 7. Is that really possible? Search re. location code yielded nothing I am an intermediate user. I can restore to an earlier time but I don't know which program might do this again.

  Read the article

• Are Colocation Cross Connects Worth While

  - by SvrGuy

  We currently operate three clusters of collocated machines in different data centers. Recently, I became aware that our newest data center will offer to cross connect us to a bandwidth provider free of charge. In the past, I never really investigated a cross connect for bandwidth because I figured that the rates would be similar to what we are paying the colo now and that it would reduce our resiliency (because we would only be using one or two carriers for IP, where as the colo uses, say 8 different providers). Then I saw an ad for hurricane electric internet services (http://he.net/cgi-bin/ip_transit_quote) that gave a price for IP transit at $1/Mbs, which is much better than the $30/Mb we pay for the blended bandwidth. What are people out there typically paying for bandwith via cross connect and how hard is to setup? Is my understanding that what you do is open agreemetns with two or three ISPs, cross connect to them and then configure your top of rack router on their network. Can you really get IP transit down to a couple of dollars per megabit per month just by doing the routing yourself? Or, is my understanding of cross connection fundamentally wrong?

  Read the article

• Recommendations for good FTP server for Win 2008 x64

  - by sfhtimssf1970

  I spent a bunch of time learning/configuring the "all new and better" FTP feature for IIS7. In my opinion, it still fails hard: In order to have multiple FTP sites on the same machine, you have to use host|user usernames (like domain.com|jason) for every account. Using IIS Manager auth doesn't seem to work at all. I'm sure I'm doing something wrong, but I can't figure out what the hell it is. I've read all the official articles on it and configured it a hundred different ways. Doesn't play well with passive connection types. That has to be disabled on the client in order for it to work. Doesn't have any way to allow one user to see multiple sites no matter what binding they are connected to. For instance, if "jason" connects to ftp.domain.com, he should be able to see domain2.com, domain3.com without seeing domain4.com and domain5.com. It takes an act of God to set this up with IIS7. So I'm wanting to install a third party FTP server instead. I've looked at FileZilla both ZFTPServer. Anyone know of any pros/cons on these? Any other recommendations?

  Read the article

• Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

  - by knda

  I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

  Read the article

• Dual boot nt4 and windows 98

  - by ItFinallyWorks

  I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

  Read the article

• Nvidia GTS 360M in Asus laptop shuts off when gaming on external display

  - by mr odus

  I have had this problem on my Asus G51j Intel I5, Nvidia GTS360M graphics card. Just updated the drivers to latest off Nvidias site. Most games I play, If I hook it up through an external monitor(this happens whether it's HDMI or VGA). The laptop hard shuts down after about 20 minutes, give or take. This tends to happen on more graphically intense games like Call of dutys, bioshock. I'm running Windows 7, latest nvidia drivers. Games work fine on my laptops screen, and Movies, general computing work fine on the external displays. The laptop always sits on a cooling pad and the latest time was in front of my AC unit, I ran heatfan or whatever the heat tracking software was, and my temperatures were normal through a shut down. This has been happening for the life of the laptop. I dont play very many games, and even fewer on an external monitor, so this issue doesnt come up much Is it possible I have a faulty graphics card? Is there anything else I can try?

  Read the article

• Managing a test iSCSI target server

  - by dyasny

  Hi all, I am using a RHEL server with a few hard drives, and tgtd as the iscsi target software. I a looking for a way to allocate and deallocate space and targets with that space, without restarting my system, or harming other LUNs. Currently, all my HDDs are PVs in a single VG, and I lvcreate/lvremove as required, and then export the allocated LVs using a tgt script: usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=1 --targetname iqn.2001-04.com.lab.gss:300gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_300Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=2 --targetname iqn.2001-04.com.lab.gss:200gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 2 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_200Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 2 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=3 --targetname iqn.2001-04.com.lab.gss:100gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 3 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_100Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 3 -I ALL tgtadm --mode target --op show So in order to remove a LUN, I stop the tgtd service, lvremove the lv, and remove the entry from the iscsi target script When I add a lun, I run lvcreate, and then add an entry to the script and run it. This is not quite optimal, since restarting the service is a bad idea while other LUNs are busy, so I am looking for a more scalable and safer way. Thanks

  Read the article

• Cannot send email outside of network using Postfix

  - by infmz

  I've set up an Ubuntu server with Request Tracker following this guide (the section about inbound mail would be relevant). However, while I'm able to send mail to other users within the network/domain, I cannot seem to reach beyond - such as my personal accounts etc. Now I have no idea what is causing this, I thought that all it takes is for the system to fetch mail through our exchange server and be able to deliver in the same way. However, that hasn't been the case. I have found another server setup in a similar fashion (CentOS 5, Request Tracker but using Sendmail), however it is a dated server and whoever's built it has kindly left no documentation on how it works, making it a pain to use that as a reference system! :) At one point, I was told I need to set up a relay between the local server's email add and our AD server but this didn't seem to work. Sorry, I know next to nothing about mailservers, my colleagues nothing about Linux so it's a hard one for me. Thank you! EDIT: Result of postconf -N with details masked =) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = myhost.mydomain.com, localhost.mydomain.com, , localhost myhostname = myhost.mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = EXCHANGE IP smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Sample log message: Sep 4 12:32:05 theedgesupport postfix/smtp[9152]: 2147B200B99: to=<[email protected]>, relay= RELAY IP :25, delay=0.1, delays=0.05/0/0/0.04, dsn=5.7.1, status=bounced (host HOST IP said: 550 5.7.1 Unable to relay for [email protected] (in reply to RCPT TO command))

  Read the article

• ASUS M51SE freezes for no apparent reason

  - by Piotr Justyna

  First of all, it's my first question on superuser so please excuse me if it doesn't belong here, a similar one has already been posted here or if I missed some details. My ASUS M51 freezes up. It all started a couple of months ago and I basically forgot about it since I bought a new laptop around that time. This is, however, bugging me since then and I can't explain why it's happening. Let me quickly describe what's wrong. When switched on and running (win 7) it freezes after a couple of minutes of normal usage (or even if I don't actually do anything). By 'freezes', I mean it's like a static image of my desktop was being displayed on the screen. Nothing happens, alt+ctrl+del doesn't help, I basically have to switch it off using a power button. I tried to remove the hard drive and to start the laptop without it. The same here - it freezes on the the initial black loading screen (a couple of minutes after the computer says it can't find the hdd) I tried to remove RAM - the same thing. All fans are spinning as they should. I cleaned the fans using a small paintbrush but it doesn't change anything. The laptop is generally clean and in pretty good physical shape. Well, almost, obviously :). One possible clue I can think of is that the laptop is heating excessively even when it doesn't actually do anything (hdd removed). Do you have any ideas what is the cause of this or what else can I try? Thanks, Piotr

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >