Search Results

Search found 29214 results on 1169 pages for 'open iscsi'.

Page 4/1169 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• ISCSI Target Ubuntu

  - by erai

  I'm trying to setup iscsitarget on Ubuntu 12.04 but I can't connect to it. On the windows machine it says Target Error. with no other output. My ietd.conf is Target iqn.2012-06.com.org:virtual_machines.lun Lun 0 Type=fileio,Path=/media/volume0/storlun0.bin When I run iscsiadm -m discovery -t st -p localhost The output is iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 closed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: Connection to Discovery Address 127.0.0.1 failed iscsiadm: Login I/O error, failed to receive a PDU iscsiadm: retrying discovery login to 127.0.0.1 iscsiadm: connection login retries (reopen_max) 5 exceeded iscsiadm: Could not perform SendTargets discovery. dmesg output: [ 3324.804665] iscsi_trgt: Removing all connections, sessions and targets [ 3325.875343] iSCSI Enterprise Target Software - version 1.4.20.3 [ 3325.875415] iscsi_trgt: Registered io type fileio [ 3325.875420] iscsi_trgt: Registered io type blockio [ 3325.875425] iscsi_trgt: Registered io type nullio

  Read the article

• iSCSI timeouts under high load

  - by Antonio

  I have two servers connected via Gigabit Ethernet. One is iSCSI target, the second one is initiator. When I run mkfs.ext4 at initiator, after a while disk IO slows down critically. In the target host I can see the following in syslog: Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668c 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668c 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668d 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668d 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119668e 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119668e 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 1196696 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 1196696 6 Sep 14 09:40:03 sh11 tgtd: abort_task_set(1139) found 119669e 0 Sep 14 09:40:03 sh11 tgtd: abort_cmd(1115) found 119669e 6 Sep 14 09:40:04 sh11 tgtd: abort_task_set(1139) found 119669f 0 Sep 14 09:40:04 sh11 tgtd: abort_cmd(1115) found 119669f 6 And load average grows to 12 or even more: # uptime 12:37:00 up 23 days, 13:25, 1 user, load average: 12.00, 7.00, 4.00 CentOS 6.3 tgtd 1.0.24 Intel Pentium 4 2.4GHz 1Gb RAM 2Tb WD Cavlar Green SATA 2.0 #lspci 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02) 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 02) 00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV200 QW [Radeon 7500] 02:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) 02:02.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50) 02:03.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE/SATA Controller (rev 50) 02:04.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (CNR) Ethernet Controller (rev 82) Is there a way to tune target host to avoid these timeouts?

  Read the article

• Page allocation failures on iSCSI storage

  - by Dave

  We have a CentOS 6.3 iscsi server (16GB RAM) running on Infiniband bus (ipoib). When the load is high I can see multiple errors: Sep 3 23:22:20 stor4 kernel: tgtd: page allocation failure. order:2, mode:0x20 Sep 3 23:22:20 stor4 kernel: Pid: 3637, comm: tgtd Not tainted 2.6.32 #1 Sep 3 23:22:20 stor4 kernel: Call Trace: Sep 3 23:22:20 stor4 kernel: [] ? __alloc_pages_nodemask+0x77f/0x940 Sep 3 23:22:20 stor4 kernel: [] ? kmem_getpages+0x62/0x170 Sep 3 23:22:20 stor4 kernel: [] ? fallback_alloc+0x1ba/0x270 Sep 3 23:22:20 stor4 kernel: [] ? cache_grow+0x2cf/0x320 Sep 3 23:22:20 stor4 kernel: [] ? ____cache_alloc_node+0x99/0x160 Sep 3 23:22:20 stor4 kernel: [] ? pskb_expand_head+0x64/0x270 Sep 3 23:22:20 stor4 kernel: [] ? __kmalloc+0x189/0x220 Sep 3 23:22:20 stor4 kernel: [] ? pskb_expand_head+0x64/0x270 Sep 3 23:22:20 stor4 kernel: [] ? __pskb_pull_tail+0x2aa/0x360 Sep 3 23:22:20 stor4 kernel: [] ? tcp_init_tso_segs+0x37/0x50 Sep 3 23:22:20 stor4 kernel: [] ? dev_queue_xmit+0x4bb/0x6f0 Sep 3 23:22:20 stor4 kernel: [] ? neigh_connected_output+0xbd/0x100 Sep 3 23:22:20 stor4 kernel: [] ? ip_finish_output+0x237/0x310 Sep 3 23:22:20 stor4 kernel: [] ? ip_output+0xb8/0xc0 Sep 3 23:22:20 stor4 kernel: [] ? __ip_local_out+0x9f/0xb0 Sep 3 23:22:20 stor4 kernel: [] ? ip_local_out+0x25/0x30 Sep 3 23:22:20 stor4 kernel: [] ? ip_queue_xmit+0x190/0x420 Sep 3 23:22:20 stor4 kernel: [] ? sock_aio_write+0x167/0x180 Sep 3 23:22:20 stor4 kernel: [] ? tcp_transmit_skb+0x3fe/0x7b0 Sep 3 23:22:20 stor4 kernel: [] ? tcp_write_xmit+0x1fb/0xa20 Sep 3 23:22:20 stor4 kernel: [] ? __tcp_push_pending_frames+0x30/0xe0 Sep 3 23:22:20 stor4 kernel: [] ? tcp_push_pending_frames+0x33/0x40 Sep 3 23:22:20 stor4 kernel: [] ? do_tcp_setsockopt+0x3d6/0x480 Sep 3 23:22:20 stor4 kernel: [] ? tcp_setsockopt+0x2a/0x30 Sep 3 23:22:20 stor4 kernel: [] ? sock_common_setsockopt+0x14/0x20 Sep 3 23:22:20 stor4 kernel: [] ? sys_setsockopt+0x7f/0xe0 Sep 3 23:22:20 stor4 kernel: [] ? system_call_fastpath+0x16/0x1b Sep 3 23:22:20 stor4 kernel: Mem-Info: Sep 3 23:22:20 stor4 kernel: Node 0 DMA per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA32 per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 186, btch: 31 usd: 183 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 186, btch: 31 usd: 23 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 186, btch: 31 usd: 183 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 186, btch: 31 usd: 181 Sep 3 23:22:20 stor4 kernel: Node 0 Normal per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 186, btch: 31 usd: 171 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 186, btch: 31 usd: 29 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 186, btch: 31 usd: 32 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 186, btch: 31 usd: 32 Sep 3 23:22:20 stor4 kernel: active_anon:1875 inactive_anon:2473 isolated_anon:0 Sep 3 23:22:20 stor4 kernel: active_file:1243637 inactive_file:2505055 isolated_file:0 Sep 3 23:22:20 stor4 kernel: unevictable:0 dirty:268338 writeback:0 unstable:0 Sep 3 23:22:20 stor4 kernel: free:86050 slab_reclaimable:132377 slab_unreclaimable:23744 Sep 3 23:22:20 stor4 kernel: mapped:1293 shmem:222 pagetables:720 bounce:0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA free:15732kB min:124kB low:152kB high:184kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15332kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 2172 16060 16060 Sep 3 23:22:20 stor4 kernel: Node 0 DMA32 free:107544kB min:18268kB low:22832kB high:27400kB active_anon:468kB inactive_anon:2364kB active_file:566208kB inactive_file:976112kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:2224900kB mlocked:0kB dirty:96816kB writeback:0kB mapped:908kB shmem:12kB slab_reclaimable:176940kB slab_unreclaimable:968kB kernel_stack:64kB pagetables:192kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 0 13887 13887 Sep 3 23:22:20 stor4 kernel: Node 0 Normal free:220924kB min:116772kB low:145964kB high:175156kB active_anon:7032kB inactive_anon:7528kB active_file:4408340kB inactive_file:9044108kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:14220800kB mlocked:0kB dirty:976536kB writeback:0kB mapped:4264kB shmem:876kB slab_reclaimable:352568kB slab_unreclaimable:94008kB kernel_stack:2048kB pagetables:2688kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 0 0 0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA: 1*4kB 0*8kB 1*16kB 1*32kB 1*64kB 0*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15732kB Sep 3 23:22:20 stor4 kernel: Node 0 DMA32: 16305*4kB 4381*8kB 353*16kB 8*32kB 1*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 107900kB Sep 3 23:22:20 stor4 kernel: Node 0 Normal: 14548*4kB 14808*8kB 2420*16kB 31*32kB 5*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB = 220784kB Sep 3 23:22:20 stor4 kernel: 3748822 total pagecache pages Sep 3 23:22:20 stor4 kernel: 0 pages in swap cache Sep 3 23:22:20 stor4 kernel: Swap cache stats: add 0, delete 0, find 0/0 Sep 3 23:22:20 stor4 kernel: Free swap = 975864kB Sep 3 23:22:20 stor4 kernel: Total swap = 975864kB Sep 3 23:22:20 stor4 kernel: 4194303 pages RAM Sep 3 23:22:20 stor4 kernel: 126915 pages reserved Sep 3 23:22:20 stor4 kernel: 3753534 pages shared Sep 3 23:22:20 stor4 kernel: 213500 pages non-shared TCP stack and VM config: net.core.rmem_max = 83886080 net.core.wmem_max = 83886080 net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.ipv4.tcp_rmem = 40960 1048560 4194304 net.ipv4.tcp_wmem = 40960 196608 4194304 net.ipv4.tcp_mem = 16388608 16388608 16388608 vm.min_free_kbytes=135168 Additional tweaks: /sbin/blockdev --setra 16384 /dev/sdb echo 2048 /sys/block/sdb/queue/nr_requests Where might the problem be? Thank you.

  Read the article

• European e-government Action Plan all about interoperability

  - by trond-arne.undheim

  Yesterday, the European Commission released its European eGovernment Action Plan for 2011-2015. The plan includes measures on providing deeper user empowerment, enhancing the Internal Market, more efficiency and effectiveness of public administrations, and putting in place pre-conditions for developing e-government. The Good - Defines interoperability very clearly. Calls interoperability "a pre-condition for cross-border eGovernment services" (a very strong formulation) and says interoperability "is supported by open specifications". - Uses the terminology "open specifications" which, let's face it, is pretty close to "open standards" which is the term the rest of the world would use. - Confirms that Member States are fully committed to the political priorities of the Malmö Declaration (which was all about open standards) including the very strong action: by 2013: All Member States will have incorporated the political priorities of the Malmö Declaration in their national strategies. Such tight Action Plan integration between Commission and Member State priorities has seldom been attempted before, particularly not in a field where European legal competence is virtually non-existent. What we see now, is the subtle force of soft power rather than the rough force of regulation. In this case, it is the Member States who want Europe to take the lead. Very refreshing! Some quotes that show the commitment to interoperability and open specifications: "The emergence of innovative technologies such as "service-oriented architectures" (SOA), or "clouds" of services,  together with more open specifications which allow for greater sharing, re-use and interoperability reinforce the ability of ICT to play a key role in this quest for effficiency in the public sector." (p.4) "Interoperability is supported through open specifications" (p.13) 2.4.1. Open Specifications and Interoperability (p.13 has a whole section dedicated to this important topic. Open specifications and interoperability are nearly 100% interrelated): "Interoperability is the ability of systems and machines to exchange, process and correctly interpret information. It is more than just a technical challenge, as it also involves legal, organisational and semantic aspects of handling  data" (p.13) "standards and  open platforms offer opportunities for more cost-effective use of resources and delivery of services" (p.13). The Bad Shies away from defining open standards, or even open specifications, the EU's preferred term for the key enabler of interoperability. Verdict 90/100, a very respectable score.

  Read the article

• sg_map & lsscsi showing old storage version

  - by PratapSingh

  I am using SUN storage and recently upgraded/refreshed my ISCSI LUN storage. We have replicated old storage to new storage and attached to our servers. I can see at SUN storage side that storage is attached to server and also from server when I run the below command it prints the following output : iscsiadm -m session tcp: [1] 10.1.1.10:3260,2 iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd The above storage is SUN STORAGE 7420 But when I run sg_map or lsscsi command it prints different version: lsscsi disk SUN Sun Storage 7410 1.0 /dev/sda disk SUN Sun Storage 7410 1.0 /dev/sdb disk SUN Sun Storage 7410 1.0 /dev/sdc disk SUN Sun Storage 7410 1.0 /dev/sdd Output of ls on "/dev/disk/by-path/" ls -1 /dev/disk/by-path/ ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-0 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-0-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-18 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-18-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-2 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-2-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-4 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-4-part1 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-6 ip-10.1.1.10:3260-iscsi-iqn.86-03.com.sun:02:afsfsf58-c56a-6ba8-a944-addd258687cd-lun-6-part1 I have rebooted server twice but still I am getting the same output as given above.

  Read the article

• Drobo Pros won't mount via iSCSI

  - by niklassaers

  Hi guys, I've got an Xserve where I've configured a Drobo Pro. Connected via firewire and USB, it works fine, but when connected to a separate network port, it doesn't mount. I've got the Drobo Pro configured to 2.0.1.2/255.255.0.0 and the network port to 2.0.0.1/255.255.0.0. I can ping the IP of the Drobo Pro just fine. I've installed Drobo Dashboard 1.6.8. Cheers Nik

  Read the article

• Resizing an iscsi LUN on an EMC under Linux RHEL 5

  - by niXar

  I expanded a LUN on my SAN (from 30G to 50G), and tried all kind of voodoo but it looks like the system still believes the device is still small, despite showing me the new size alright. # blockdev --getsize64 /dev/sdl 53687091200 # dd if=/dev/sdl skip=$(( 31*1024*1024*1024/512 )) count=1|hexdump -C dd: reading `/dev/sdl': Input/output error The dd line works for blocks below the 30G original size. If I reboot, the problem goes away, but I don't want to since the machine has a dozen VMs running. I tried various magic, such as: iscsiadm -m node -R -I iface0 ... to no avail. Note: I'm not using multipath.

  Read the article

• Setup of HP ProCurve 2810-24G for iSCSI?

  - by 3molo

  Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

  Read the article

• How to force iscsi initiator to login only once

  - by Disco

  Trying to setup a few CentOS nodes to connect to a Dell MD3600i array, i'm running into the issue that the MD3600i shows 4 different portals (with different IP addresses) and when i launch the initiator on host side well, it connects to every IP address it has seen during the discovery phase; resulting in duplicates. How can I 'force' the initiator to discard every other IP and let me choose only one IP portal to connect to ? Must be damn stupid but I can't figure out how. Thx

  Read the article

• Oracle Business Intelligence integration with Oracle Open Office

  - by Harald Behnke

  A highlight of the latest Oracle Office product launches are the first Oracle application connectors introduced with Oracle Open Office 3.3. The Oracle Open Office Connector for Oracle Business Intelligence perfectly demonstrates the advantages of enterprise and office productivity software engineered to work together. The connector enables you to access and run Oracle Business Intelligence Enterprise Edition requests directly within Oracle Open Office. The refreshable requests leverage not only native Open Office functionality but also the scalability and performance of the Oracle Oracle Business Intelligence server (R10.x). The requests reference a single source of information as defined in the Oracle Business Intelligence server data thus ensuring consistent information across the enterprise. See how it works in the demo video: Beyond the dramatic license cost savings for Oracle Business Intelligence customers using Oracle Open Office, the joint engineering efforts result in usability and efficiency benefits not available with Microsoft Office: Import styles and conditional formats defined in Business Intelligence answersApply customized styles, direct or conditional formats to Oracle Business Intelligence data - all changes are preserved during refreshChange chart properties for Oracle Open Office charts - all changes are preserved during refresh Read more about the Oracle Open Office enterprise features.

  Read the article

• Oracle Announces Oracle Cloud Office and Oracle Open Office 3.3

  - by Paulo Folgado

  Oracle today introduced Oracle Cloud Office and Oracle Open Office 3.3, two complete, open standards-based office productivity suites for the desktop, web and mobile devices - helping users significantly improve productivity, reduce costs and achieve greater innovation across the enterprise.Oracle Cloud Office 1.0 is a web and mobile office suite that enables web 2.0-style collaboration and mobile document access. Compatibility with Microsoft Office and integration with Oracle Open Office enable rich and seamless offline editing of complex presentations, text and spreadsheet documents. Oracle Open Office 3.3 includes new enterprise connectors to Oracle Business Intelligence, Oracle E-Business Suite, other Oracle Applications and Microsoft Sharepoint, to allow for fast, seamless integration into existing enterprise software stacks. In addition, it adds increased stability, compatibility and performance at up to five times lower license cost compared to Microsoft Office. Based on the Open Document Format (ODF) and open web standards, Oracle Office enables users to share files on any system as it is compatible with both legacy Microsoft Office documents and modern web 2.0 publishing. The Oracle Office APIs and open standards-based approach provides IT users with flexibility, lower short and long-term costs and freedom from vendor lock-in - enabling organizations to build a complete Open Standard Office Stack. If you're interested to learn more, read our today's press release or visit oracle.com/office.

  Read the article

• Open Source but not Free Software (or vice versa)

  - by TRiG

  The definition of "Free Software" from the Free Software Foundation: “Free software” is a matter of liberty, not price. To understand the concept, you should think of “free” as in “free speech,” not as in “free beer.” Free software is a matter of the users' freedom to run, copy, distribute, study, change and improve the software. More precisely, it means that the program's users have the four essential freedoms: The freedom to run the program, for any purpose (freedom 0). The freedom to study how the program works, and change it to make it do what you wish (freedom 1). Access to the source code is a precondition for this. The freedom to redistribute copies so you can help your neighbor (freedom 2). The freedom to distribute copies of your modified versions to others (freedom 3). By doing this you can give the whole community a chance to benefit from your changes. Access to the source code is a precondition for this. A program is free software if users have all of these freedoms. Thus, you should be free to redistribute copies, either with or without modifications, either gratis or charging a fee for distribution, to anyone anywhere. Being free to do these things means (among other things) that you do not have to ask or pay for permission to do so. The definition of "Open Source Software" from the Open Source Initiative: Open source doesn't just mean access to the source code. The distribution terms of open-source software must comply with the following criteria: Free Redistribution The license shall not restrict any party from selling or giving away the software as a component of an aggregate software distribution containing programs from several different sources. The license shall not require a royalty or other fee for such sale. Source Code The program must include source code, and must allow distribution in source code as well as compiled form. Where some form of a product is not distributed with source code, there must be a well-publicized means of obtaining the source code for no more than a reasonable reproduction cost preferably, downloading via the Internet without charge. The source code must be the preferred form in which a programmer would modify the program. Deliberately obfuscated source code is not allowed. Intermediate forms such as the output of a preprocessor or translator are not allowed. Derived Works The license must allow modifications and derived works, and must allow them to be distributed under the same terms as the license of the original software. Integrity of The Author's Source Code The license may restrict source-code from being distributed in modified form only if the license allows the distribution of "patch files" with the source code for the purpose of modifying the program at build time. The license must explicitly permit distribution of software built from modified source code. The license may require derived works to carry a different name or version number from the original software. No Discrimination Against Persons or Groups The license must not discriminate against any person or group of persons. No Discrimination Against Fields of Endeavor The license must not restrict anyone from making use of the program in a specific field of endeavor. For example, it may not restrict the program from being used in a business, or from being used for genetic research. Distribution of License The rights attached to the program must apply to all to whom the program is redistributed without the need for execution of an additional license by those parties. License Must Not Be Specific to a Product The rights attached to the program must not depend on the program's being part of a particular software distribution. If the program is extracted from that distribution and used or distributed within the terms of the program's license, all parties to whom the program is redistributed should have the same rights as those that are granted in conjunction with the original software distribution. License Must Not Restrict Other Software The license must not place restrictions on other software that is distributed along with the licensed software. For example, the license must not insist that all other programs distributed on the same medium must be open-source software. License Must Be Technology-Neutral No provision of the license may be predicated on any individual technology or style of interface. These definitions, although they derive from very different ideologies, are broadly compatible, and most Free Software is also Open Source Software and vice versa. I believe, however, that it is possible for this not to be the case: It is possible for software to be Open Source without being Free, or to be Free without being Open Source. Questions Is my belief correct? Is it possible for software to fall into one camp and not the other? Does any such software actually exist? Please give examples. Clarification I've already accepted an answer now, but I seem to have confused a lot of people, so perhaps a clarification is in order. I was not asking about the difference between copyleft (or "viral", though I don't like that term) and non-copyleft ("permissive") licenses. Nor was I asking about your personal idiosyncratic definitions of "Free" and "Open". I was asking about "Free Software as defined by the FSF" and "Open Source Software as defined by the OSI". Are the two always the same? Is it possible to be one without being the other? And the answer, it seems, is that it's impossible to be Free without being Open, but possible to be Open without being Free. Thank you everyone who actually answered the question.

  Read the article

• Oracle Cloud Office and Oracle Open Office 3.3

  - by trond-arne.undheim

  Industry's First Complete, Open Standards-Based Office Productivity Suites for Desktop, Web and Mobile Users were launched today, 15 December 2010 (press release). Based on the Open Document Format (ODF) and open web standards, Oracle Open Office enables users to share files on any system as it is compatible with both legacy Microsoft Office documents and de facto formats, Portable Document Format (PDF), and modern web 2.0 publishing. Oracle Cloud Office is the foundation of the open standard office stack based on the open document format (ODF), and has powerful social sharing capability, ubiquitous document authoring and collaboration. Together, the two solutions enable cross-company, enterprise class collaboration with true interoperability, including the flexibility to support users across a wide variety of devices and platforms.

  Read the article

• How to get physical partition name from iSCSI details on Windows?

  - by Barry Kelly

  I've got a piece of software that needs the name of a partition in \Device\Harddisk2\Partition1 style, as shown e.g. in WinObj. I want to get this partition name from details of the iSCSI connection that underlies the partition. The trouble is that disk order is not fixed - depending on what devices are connected and initialized in what order, it can move around. So suppose I have the portal name (DNS of the iSCSI target), target IQN, etc. I'd like to somehow discover which volumes in the system relate to it, in an automated fashion. I can write some PowerShell WMI queries that get somewhat close to the desired info: PS> get-wmiobject -class Win32_DiskPartition NumberOfBlocks : 204800 BootPartition : True Name : Disk #0, Partition #0 PrimaryPartition : True Size : 104857600 Index : 0 ... From the Name here, I think I can fabricate the corresponding name by adding 1 to the partition number: \Device\Harddisk0\Partition1 - Partition0 appears to be a fake partition mapping to the whole disk. But the above doesn't have enough information to map to the underlying physical device, unless I take a guess based on exact size matching. I can get some info on SCSI devices, but it's not helpful in joining things up (iSCSI target is Nexenta/Solaris COMSTAR): PS> get-wmiobject -class Win32_SCSIControllerDevice __GENUS : 2 __CLASS : Win32_SCSIControllerDevice ... Antecedent : \\COBRA\root\cimv2:Win32_SCSIController.DeviceID="ROOT\\ISCSIPRT\\0000" Dependent : \\COBRA\root\cimv2:Win32_PnPEntity.DeviceID="SCSI\\DISK&VEN_NEXENTA&PROD_COMSTAR... Similarly, I can run queries like these: PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_TargetClass PS> get-wmiobject -namespace ROOT\WMI -class MSiSCSIInitiator_PersistentDevices These guys return information relating to my iSCSI target name and the GUID volume name respectively (a volume name like \\?\Volume{guid-goes-here}), but the GUID volume name is no good to me, and there doesn't appear to be a reliable correspondence between the target name and the volume that I can join on. I simply can't find an easy way of getting from an IQN (e.g. iqn.1992-01.com.example:storage:diskarrays-sn-a8675309) to physical partitions mapped from that target. The way I do it by hand? I start Disk Management, and look for a partition of the correct size, verify that its driver says NEXENTA COMSTAR, and look at the disk number. But even this is unreliable if I have multiple iSCSI volumes of the exact same size. Any suggestions?

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

  - by MichaelGG

  Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• VMWare vSphere 5: 4 pNICs for iSCSI vs. 2 pNICs

  - by gravyface

  New SAN for me, never used before: it's an IBM DS3512, dual controller with a quad 1GbE NIC per controller that a client bought and needs help setting up. Hosts (x2) have 8 pNICs and while I usually reserve 2 pNICs for iSCSI per host (and 2 for VM, 2 for management, 2 for vMotion, staggered across adapters), these extra ports on the SAN have me wondering if storage I/O would be significantly improved with 2 additional NICs per host, or if the limitations of the vmkernel/initiator would prevent the additional multipaths from ever being realized. I'm not seeing alot of 4 pNIC iSCSI implementations per host; 2 is the de facto standard from what I've read/seen online. I could and probably will do some I/O testing, but just wondering if there's a "wall" that someone else has discovered long ago (i.e. before 10GbE) that makes a 4 NIC iSCSI per host setup somewhat pointless. Just to clarify: I'm not looking for a how-to, but an explanation (link to paper, VMWare recommendation, benchmark, etc.) as to why 2-NIC configurations are the norm vs. 4-NIC iSCSI configurations. i.e. storage vendor limitations, VMKernel/initiator limitations, etc.

  Read the article

• Open-sourcing a mobile app

  - by hgpc

  I'm considering making one of my most popular mobile apps into an open-source project. It has an Android and iPhone version. While I have used open-source projects and submitted feature requests and bug reports, I have never created an open-source project nor contributed with a patch to an existing one. What are the top things that I should take into account before opening the source of my project? What specific steps do you recommend taking for open-sourcing a mobile app?

  Read the article

• ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

  - by GruffTech

  Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

  Read the article

• Open Office APIs e Migração de Macros - 23/Fev/11

  - by Paulo Folgado

  AGENDAIntroduction on Oracle Open Office/OpenOffice.org API Oracle Open Office Basic IDE Hallo World and more Oracle Open Office dialog Programming Integrating Macros in Oracle Open Office Appetizer - Using JavaMicrosoft Office Macro MigrationEstimation Macro Migration effortMigrating Macros Migration pitfallsOs participantes deverão ter conhecimentos sólidos de Microsoft Office e de programação VBA.

  Read the article

• Open source Projects which pays the developers?

  - by java_mouse

  Are there any Java open source projects that Pays the developers? I came across this from a book : Programming Interviews Exposed. Page #25 Are open-source projects preferable? The vast majority of programming jobs have usually involved proprietary, closed-source projects, which some programmers find objectionable. There’s been a small shift in favor of more open software development, which provides more opportunities for people like yourself to participate in open-source projects and still be paid for that participation.

  Read the article

• What is the most suitable way to manage iSCSI storage for Virtual Environments?

  - by Gabriel Talavera

  We are planning to place a HP MSA P2000 with two FC/iSCSI controllers in our network. We have two options to provide more storage to Virtual Machines (We are running Hyper-V): A) Add iSCSI targets to the Virtual Hosts and then create VHD that we would add to each guest server. B) Directly add iSCSI targets in each guest server. Just wondering if one of those options is better than the other, and which is the common practice in a virtualized environment. Thanks in advance for any input!

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by ajit.george

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues? Thanks in advance.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >