Search Results

Search found 25214 results on 1009 pages for 'browser tools'.

Page 401/1009 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• Changing Apache2.2.11 httpd.conf has no effect

  - by Adrian

  Hi, Hopefully someone can help here. I recently installed wampserver ver 2.0 with Apache ver 2.2.11. My issue is, I have some large php scripts which timeout at the default 5 min (300 sec) browser limit (I'm using ie8). It is critcal I get this limit extended. I have tried changing the httpd.conf file to include the following: TimeOut 1200 My objective was to set the timeout at 1200 seconds, or 20 min. I had just chosen a random location to place this directive within the httpd.conf file as I cannot locate any documentation to suggest it belongs in a specific place within the file. Regardless, the changes I make appear in the httpd.conf file that can be found in the system tray for wampserver, however they have no effect - the browser still times out after 5 minutes. I thought perhaps I had the capitals incorrect, so I changed to: Timeout 1200 This change had no effect either. Can someone please help, this is very frustrating. Maybe the command can only be used within a specific module? If so, I have no idea which one, nor do I know the syntax to specify this. Regards Adrian.

  Read the article

• Stop scrolling to ID when opening jQuery Modal via URL

  - by markedup

  I need to be able to open an ID'd jQuery UI Modal on a page when that modal's ID is passed in the page's URL. For example: http://mysite.com/visit.html#directions #directions is an ID'd DIV at the very bottom of the page, right before the closing BODY element. It's instantiated as a jQuery UI dialog on page load, then I'm running a function to check the current URL for the modal's ID. If the URL contains the modal's ID, the modal is opened. Here's what my auto-open function looks like: function autoOpenModal() { if ( document.location.href.indexOf('#') ) { var uriParts = document.location.href.split('#'); var hashID = '#' + uriParts[1]; if ( $(hashID) && $(hashID).hasClass('dialog')) { $(hashID).dialog('open'); } } } The problem I'm having is that the browser is automatically scrolling down to the ID at the very bottom of the page before the modal is opened. So when the user closes the modal they're at the bottom of the page (which seems "broken" to me). Can anyone tell me how I stop the browser from auto-scrolling down to the ID please? I've had a look at event.preventDefault() but without success; I'm not sure where or how to use it in the event chain.

  Read the article

• How to enter text into the "Write something..." box on Facebook and click Submit

  - by Peter Payne

  Hello, I am trying to manipulate Facebook pages in various ways, using Javascript browser elements. I'd need to be able to insert some text into the top "Type something..." box that shows on my site's fan page (or alternately, "click into" the field and I can type the text using GUI scripting), then click the "submit" button as if i'd done it by hand. It's tricky since the page is very Ajax heavy and I can't find the names of the elements I need to manipulate, let alone how to manipulate them as they're not using traditional form fields I'm used to. Can anyone help me figure out how to do this with javascript commands, which I'd be calling from Applescript on the Mac? Many thanks in advance. UPDATE Thanks for the comments below. Believe me, I am not trying to do anything spammy or douchy, mainly posting links to products that have gone live on page facebook page, but do it during the business day when people are on rather than at strange hours of the day. I am located in Japan so my sleep period is right when people are using FB. The solution I came up with for clicking the button was got using UI Browser, an outstanding tool if you're trying to script on the Mac. The script that clicked the button for me was: tell application "Safari" activate set thename to name of (get current tab of window 1) delay 3 tell application "System Events" tell process "Safari" try click button "Share" of group 1 of group 2 of list 3 of group 9 of UI element 1 of scroll area 1 of group 3 of window thename -- this one works on the mini? on error click button "Share" of group 1 of group 2 of list 3 of group 9 of UI element 1 of scroll area 1 of group 2 of window thename -- did not work end try end tell end tell end tell Hope this is useful to anyone.

  Read the article

• How do I avoid having JSONP returns cached in an HTML5 offline application?

  - by Kent Brewster

  I had good luck with cached offline apps until I tried including data from JSONP endpoints. Here's a tiny example, which loads a single movie from the new Netflix widget API: <!DOCTYPE html> <html manifest="main.manifest"> <head> <title>Testing!</title> </head> <body> <p>Attempting to recover a title from Netflix now...</p> <script type="text/javascript"> function ping(r) { alert('API reply: ' + r.catalog_title.title.regular); } var cb = new Date().getTime(); var s = document.createElement('SCRIPT'); s.src = 'http://movi.es/7Soq?v=2.0&output=json&expand=widget&callback=ping&cacheBuster=' + cb; alert('SCRIPT src: ' + s.src); s.type = 'text/javascript'; document.getElementsByTagName('BODY')[0].appendChild(s); </script> </body> </html> ... and here's the contents of my manifest, main.manifest, which contains no files and is only there so my browser knows to cache the calling HTML file. CACHE MANIFEST Yes, I've confirmed that my server is sending the manifest down with the correct content type, text/cache-manifest. The app works fine--meaning both alerts show--the first time I run it, but subsequent runs, even with the attempt at cache-busting in line 10, seem to be attempting to load the script from cache no matter what the query string is. I see the alert showing the script source, but the callback never fires. If I remove the manifest link from line 2 and reset my browser--being Safari and the iPhone Simulator--to clear cache, it works every time. I've also tried alerting the number of SCRIPT tags in the page, and it's definitely seeing both the existing and dynamically-created tag in all cases.

  Read the article

• ASP.NET 2.0 + Firefox/Safari - UI Issues?

  - by Tejaswi Yerukalapudi

  I'm developing on a system that was originally developed five years ago. I don't have access to the complete source code of the system, but it is completely driven by XML and runs on ASP.NET 2.0. This was originally written for IE6, but since Microsoft has officially decided to dump it, we moved to IE7. Some javascript is added on the client side, but nothing that changes the UI has been done. (We had to integrate a credit card reader into the system) This code is accessed primarily on tablet PCs running windows, but I'd like to persuade my company to use the iPad. [The tablet somehow costs around 3k$. I think selling a 3000$ device to a client when you have the iPad for 500$ is ridiculous.] Now, my problem is if we open it in any other browser (Tested it on safari / firefox), the UI is completely messed up with elements completely out of place. Doesn't ASP.NET generate HTML that runs on any browser? My second question is if there are any credit card readers available in the market that integrate with the iPad. I don't really care about the software part as it's taken care by our company, I just need it to read the card details and post it to the server. Thanks, Teja.

  Read the article

• How can I embed images within my application and use them in HTML control?

  - by Atara

  Is there any way I can embed the images within my exe (as resource?) and use it in generated HTML ? Here are the requirements: A. I want to show dynamic HTML content (e.g. using webBrowser control, VS 2008, VB .Net, winForm desktop application) B. I want to generate the HTML on-the-fly using XML and XSL (file1.xml or file2.xml transformed by my.xsl) C. The HTML may contain IMG tags (file1.gif and or file2.gif according to the xml+xsl transformation) and here comes the complicated one: D. All these files (file1.xml, file2.xml, my.xsl, file1.gif, file2.gif) should be embedded in one exe file. I guess the XML and XSL can be embedded resources, and I can read them as stream, but what ways do I have to reference the image within the HTML ? <IMG src="???" /> I do not want to use absolute path and external files. If the image files are resources, can I use relative path? Relative to what? (I can use BASE tag, and then what?) Can I use stream as in email messages? If so, where can I find the format I need to use? http://www.websiteoptimization.com/speed/tweak/inline-images/ are browser dependent. What is the browser used by webBrowser control? IE? what version? Does it matter if I use GIF or JPG or BMP (or any other image format) for the images? Does it matter if I use mshtml library and not the regular webBrowser control? (currently I use http://www.itwriting.com/htmleditor/index.php ) Does it matter if I upgrade to VS 2010 ? Thanks, Atara

  Read the article

• Cache AJAX requests

  - by Willem

  I am sending AJAX GET-requests to a PHP application and would like to cache the request returns for later use. Since I am using GET this should be possible because different requests request different URLs (e.g. getHTML.php?page=2 and getHTML.php?page=5). What headers do I need to declare in the PHP-application to make the clients browser cache the request URL content in a proper way? Do I need to declare anything in the Javascript which handles the AJAX-request (I am using jQuery's $.ajax function which has a cache parameter)? How would I handle edits which change the content of e.g. getHTML.php?page=2 so that the client doesn't fall back to the cached version? Adding another parameter to the GET request e.g. getHTML.php?page=2&version=2 is not possible because the link to the requested URL is created automatically without any checking (which is preferably the way I want it to be). How will the browser react when I try to AJAX-request a cached request URL? Will the AJAX-request return success immediately? Thanks Willem

  Read the article

• WebView and HTML5 <video>

  - by brian moore

  I'm piecing together a cheapo app that amongst other things "frames" some of our websites... Pretty simple with the WebViewClient... until I hit the video. The video is done as HTML5 elements, and these work fine and dandy on Chrome, iPhones, and now that we fixed the encoding issues it works great on Android... in the native browser. Now the rub: WebView doesn't like it. At all. I can click on the poster image, and nothing happens. Googling, I found http://www.codelark.com/2010/05/12/android-viewing-video-from-embedded-webview/ which is close, but seems to be based on a 'link' (as in a href...) instead of a video element. (onDownloadListener does not appear to get invoked on video elements...) I also see references to overriding onShowCustomView, but that seems to not get called on video elements... nor does shouldOverrideUrlLoading.. I would rather not get into "pull xml from the server, reformat it in the app".. by keeping the story layout on the server, I can control the content a bit better without forcing people to keep updating an app. So if I can convince WebView to handle tags like the native browser, that would be best. I'm clearly missing something obvious.. but I have no clue what.

  Read the article

• setup Qt and PyQt on mac osx so my app can also deployable on windows

  - by hk_programmer

  Hi, I've been coding with Python and C++ and now need to work on building a gui for data visualization purposes. I work on Mac Snow Leopard (intel), python 3.1 using gcc 4.2.1 (from Xcode 3.1) I wanted to first install Qt and then PyQt. And my goals are to be able to: - quickly prototype GUI and the accompanied logic that drives the GUI using PyQt and python - if I decided I need the speed, or if it's fairly easy to translate my GUI into C++ using the Qt tools, I have the options to translate my app into C++ - Be able to deploy my application onto Windows (both the python and c++ version of my app) Give the goals above, what are the correct steps I should take and what issues i should be aware of when setting up Qt and PyQt. Which other deployment tools do I need? From my readings so far, here's what I have: download the Qt source for mac and configure it with -platform macx-g++42 -arch x86_64 -no-framework (i've read somewhere that building as framework causes some trouble in deployment and/or debugging, can't find the article anymore) download latest SIP source and build download latest PyQt and build from source (any special options I should pay attention to?) For deployment, I've read that I would need to use py2exe/cx_freeze for windows, p2app for mac: http://arstechnica.com/open-source/guides/2009/03/how-to-deploying-pyqt-applications-on-windows-and-mac-os-x.ars but seems like what the article describe is deploying an app you build on windows on the windows platform and vice versa. How do you deploy to windows (is it even possible?) if you are writing your Qt app on a mac ? Really appreciate the help

  Read the article

• Document management, SCM ?

  - by tsunade

  Hello, This might not be a hard core programming question, but it's related to some of the tools used by programmers I suspect. So we're a bunch of people each with a bunch of documents and a bunch of different computers on a bunch of operating systems (well, only 2, linux and windows). The best way these documents can be stored/managed is if they were available offline (the laptop might not always be online) but also synchronized between all the machines. Having a server with extra reliable storage be a "base repository" seems like a good idea to me. Using a SCM comes to my mind and I've tried Subversion, and it seems to be a good thing that it uses a centralized repository - but: When checking out the total size of the checkout is roughly double the original size. Big files or big repositories seem to slow it down. Also I've tried rsync, which might work - but it's a bit rough when it comes to the potential conflict. Finally I've tried Unison (which is a wrapping of rsync, I think) and while it works it becomes horribly slow for the big directories we have here since it has to scan everything. So the question is - is there a SCM tool out there that is actually practial to use for a big bunch of both small and big files? If thats a NO - does anyone know other tools that do this job? Thanks for reading :)

  Read the article

• What is the best Design/Way to keep user connected ?

  - by Fasih Hansmukh

  Am working on a POC for self learning in which I want to keep my user connected in LIVE pattern. For example, A game in which 4 user can play at a time , here I need to keep this user connected to my game . M not good at Socket type of programming and love to do that in Services way.What i wana know is 'What is the best way of doing this'. According to my initial Brain Storming, I have decided that I will use SilverLight(In Browser Or Out of Browser) as Front end [I have no issue in that]. I m more concern in back end. Either I make an handler or make a WCF service or use full duplex service and use pooling mechanism for that. As a random thought I come up with a Timer type logic that will fire every after 10 seconds at clients end and get status like Is it now Its turn to roll a dice Home many user left (in case if some of them left) What are connected user status in game like there score/points ect and update game view according to this at his end Kindly place your best answers here that will help me to learn this. Regards and thanks in Advance EDIT: Starting Bounty as i need more feedback. FH

  Read the article

• ASP Force Download

  - by Thomas Clayson

  In PHP I can do: header("Content-type: application/octet-stream") and then anything that I output is downloaded instead of showing in the browser. Is there a similar way to do this in ASP? I have seen about all the file streaming and such using ADODB.Stream, but that doesn't seem to work for me and always requires another file to load the content from. Bit of an ASP noob, so go easy on me. :p All I want to do is have a script that outputs a CSV and that will force download instead of showing in the browser. Thanks EDIT here is my script currently: reportingForce.aspx.vb Public Class reportingForce Inherits System.Web.UI.Page Dim FStream Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Response.Buffer = True Response.ContentType = "application/octet-stream" Response.AddHeader("Content-disposition", "attachment; filename=" & Chr(34) & "my output file.csv" & Chr(34)) Response.Write("1,2,3,4,5" & vbCrLf) Response.Write("5,6,7,8,9" & vbCrLf) End Sub End Class reportingForce.aspx Hello,World

  Read the article

• passenger won't spawn more than 6 instances despite passenger_max_pool_size = 30

  - by mrD

  I have some problems with passenger + nginx and hope someone might be able help me and direct me in the right direction. I've set the passenger_max_pool_size to 30 but passenger never spawns more than 6 instances. I'm loading a webpage that uses ajax to load 30 sub pages from the server but because passenger only spawns 6 instances they are queued. What makes me confused is that Waiting on global queue is 0 but I can see in my browser that everything gets queued. When the first 6 ajax requests are done the next 6 starts loading. What am I missing? :) This is the output from passenger-status (I had about 24 requests in the browser waiting for response from the server when I checked this status) ----------- General information ----------- max = 30 count = 6 active = 6 inactive = 0 Waiting on global queue: 0 ----------- Domains ----------- /srv/rails/production/current: PID: 28428 Sessions: 1 Processed: 42 Uptime: 5m 43s PID: 28424 Sessions: 1 Processed: 23 Uptime: 5m 43s PID: 28422 Sessions: 1 Processed: 7 Uptime: 5m 43s PID: 28420 Sessions: 1 Processed: 22 Uptime: 6m 0s PID: 28426 Sessions: 1 Processed: 39 Uptime: 5m 43s PID: 28430 Sessions: 1 Processed: 7 Uptime: 5m 43s These are my passenger related settings in nginx.conf http { passenger_root /opt/ruby/lib/ruby/gems/1.8/gems/passenger-2.2.11; passenger_ruby /opt/ruby/bin/ruby; passenger_max_pool_size 30;

  Read the article

• How do I produce a screenshot of a flash swf on the server?

  - by indignant

  I'm writing a flash app using the open source tools. I would like to load a data file in to the app and capture a screenshot of the stage on the server. The only part that seems mysterious is running the app on the server. In fact, I don't even care if it's the same app running on the server and in the browser--if I can use the flash stage and drawing routines to produce an image server-side, I'm happy. If I have to delve in to flex, fine. Right now I'm having problems finding any starting point at all. I gather Adobe has some commercial products that may fit the bill, but I'd like to stick with open source, apache, and linux. I know this is probably possible with haxe/neko, but I'd like to use more mainstream tools if possible. Am I asking too much? EDIT/CLARIFICATION: Many thanks for the responses so far, but I think I've been a bit muddy in my description. I've already written the actual stage-grabbing stuff using the same PNGEncoder class as was suggested. The problem is in actually running the swf on the server side. I don't want to let the client take the screen shot itself, because this opens up the possibility of the client maliciously submitting a screenshot which does not correspond to what is on the stage, that is, I don't want users uploading porn. If I could run the the actionscript code on the server, then I could generate the screenshot from my data files and be sure that the screenshot matches the data, but I have no idea how to run the actionscript or swf on the server.

  Read the article

• Python - Problems using mechanize to log into a difficult website

  - by user1781599

  × 139886 I am trying to log in to betfair.com by using mechanize. I have tried several ways but it always fail. This is the code I have developed so far, can anyone help me to identify what is wrong with it and how I can improve it to log into my betfair account? Thanks, import cookielib import urllib import urllib2 from BeautifulSoup import BeautifulSoup import mechanize from mechanize import Browser import re bf_username_name = "username" bf_password_name = "password" bf_form_name = "loginForm" bf_username = "xxxxx" bf_password = "yyyyy" urlLogIn = "http://www.betfair.com/" accountUrl = "https://myaccount.betfair.com/account/home?rlhm=0&" # This url I will use to verify if log in has been successful br = mechanize.Browser(factory=mechanize.RobustFactory()) br.addheaders = [("User-Agent","Mozilla/5.0 (Macintosh; Intel Mac OS X 10_5_8) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.90 Safari/537.1")] br.open(urlLogIn) br.select_form(nr=0) print br.form br.form[bf_username_name] = bf_username br.form[bf_password_name] = bf_password print br.form #just to check username and psw have been recorded correctly responseSubmit = br.submit() response = br.open(accountUrl) text_file = open("LogInResponse.html", "w") text_file.write(responseSubmit.read()) #this file should show the home page with me logged in, but it show home page as if I was not logged it text_file.close() text_file = open("Account.html", "w") text_file.write(response.read()) #this file should show my account page, but it should a pop up with an error text_file.close()

  Read the article

• How to get Tkinter to input text and submit with button

  - by Rob

  Hi I was wondering if anybody could help me submit code from the test fields to the login fields from Tkinter import * import tkMessageBox if ( __name__ == "__main__" ): import resources.lib.mechanize as mechanize mechanize # Start Browser br = mechanize.Browser(factory=mechanize.RobustFactory()) # User-Agent (Firefox) br.addheaders = [('User-agent', 'Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.6')] br.open('http://razetheworld.com/wp-login.php?redirect_to=http%3A%2F%2Frazetheworld.com') br.select_form(name="loginform") br['log'] = 'entryWidget_U must enter here' br['pwd'] = 'entryWidget_P must enter here' br.submit(name="wp-submit") print br.geturl() def displayText(): """ Display the Entry text value. """ global entryWidget_U global entryWidget_P if entryWidget_U.get().strip() == "": tkMessageBox.showerror("Tkinter Entry Widget", "Enter a Username") else: tkMessageBox.showinfo("Tkinter Entry Widget", "Text value =" + entryWidget_U.get().strip()) if entryWidget_P.get().strip() == "": tkMessageBox.showerror("Tkinter Entry Widget", "Enter a Password") else: tkMessageBox.showinfo("Tkinter Entry Widget", "Text value =" + entryWidget_P.get().strip()) if __name__ == "__main__": root = Tk() root.title("Tkinter Entry Widget") root["padx"] = 40 root["pady"] = 20 # Create a text frame to hold the text Label and the Entry widget textFrame_U = Frame(root) textFrame_P = Frame(root) #Create a Label in textFrame entryLabel = Label(textFrame_U) entryLabel["text"] = "Enter Username:" entryLabel.pack(side=LEFT) entryLabel = Label(textFrame_P) entryLabel["text"] = "Enter Password:" entryLabel.pack(side=LEFT) # Create an Entry Widget in textFrame entryWidget_U = Entry(textFrame_U) entryWidget_U["width"] = 50 entryWidget_U.pack(side=LEFT) entryWidget_P = Entry(textFrame_P) entryWidget_P["width"] = 50 entryWidget_P.pack(side=LEFT) textFrame_U.pack() textFrame_P.pack() button = Button(root, text="Login", command=#Run br.submit(name="wp-submit")) button.pack() root.mainloop()

  Read the article

• Forwarding keypresses in GTK

  - by dguaraglia

  I'm writing a bit of code for a Gedit plugin. I'm using Python and the interface (obviously) is GTK. So, the issue I'm having is quite simple: I have a search box (a gtk.Entry) and right below I have a results box (a gtk.TreeView). Right after you type something in the search box you are presented a bunch of results, and I would like the user to be able to press the Up/Down keys to select one, Enter to choose it, and be done. Thing is, I can't seem to find a way to forward the Up/Down keypress to the TreeView. Currently I have this piece of code: def __onSearchKeyPress(self, widget, event): """ Forward up and down keys to the tree. """ if event.keyval in [gtk.keysyms.Up, gtk.keysyms.Down]: print "pressed up or down" e = gtk.gdk.Event(gtk.gdk.KEY_PRESS) e.keyval = event.keyval e.window = self.browser.window e.send_event = True self.browser.emit("key-press-event", e) return True I can clearly see I'm receiving the right kind of event, but the event I'm sending gets ignored by the TreeView. Any ideas? Thanks in advance people.

  Read the article

• ASP.NET MVC - Wrong redirecting, how to debug?

  - by Xorty

  I am stuck with redirecting problem in ASP.NET MVC project. I have mapped tables via LINQtoSQL and each has unique ID as primary key. I am implementing functionallity of 'CREATE'. Basically, after new value is added into SQL table (which means I pressed Save button), I want to be redirected to Details of this freshly added item. Here's little code how I am doing it : [AcceptVerbs(HttpVerbs.Post), Authorize] public ActionResult Create(Item item) { .... return RedirectToAction("Details", new { id = item.ItemID }); Trouble is, I am never redirected to Details view (I have Details.aspx view for items). When I check CallHierarchy in Visual Studio (2010 pro) the hierarchy is indeed little strange, like this : RedirectToAction(string,object) Calls To 'RedirectToAction' Create Calls To Create (no results) Calls From Create (methods of created instance. From there I'll get back to 'RedirectToAction' and to 'Calls to Create' and 'Calls From Create' etc. etc. - loop Edit Calls From 'RedirectToAction' Not supported I am looking for some tools or more specifically 'know how' (since VS probably has some tools) to debug this kind of situations. PS: rooting is default :"{controller}/{action}/{id}", Thanks

  Read the article

• My python program always brings down my internet connection after several hours running, how do I debug and fix this problem?

  - by Shane

  I'm writing a python script checking/monitoring several server/websites status(response time and similar stuff), it's a GUI program and I use separate thread to check different server/website, and the basic structure of each thread is using an infinite while loop to request that site every random time period(15 to 30 seconds), once there's changes in website/server each thread will start a new thread to do a thorough check(requesting more pages and similar stuff). The problem is, my internet connection always got blocked/jammed/messed up after several hours running of this script, the situation is, from my script side I got urlopen error timed out each time it's requesting a page, and from my FireFox browser side I cannot open any site. But the weird thing is, the moment I close my script my Internet connection got back on immediately which means now I can surf any site through my browser, so it must be the script causing all the problem. I've checked the program carefully and even use del to delete any connection once it's used, still get the same problem. I only use urllib2, urllib, mechanize to do network requests. Anybody knows why such thing happens? How do I debug this problem? Is there a tool or something to check my network status once such situation occurs? It's really bugging me for a while... By the way I'm behind a VPN, does it have something to do with this problem? Although I don't think so because my network always get back on once the script closed, and the VPN connection never drops(as it appears) during the whole process.

  Read the article

• GWT: creating a text widget for highly customized data entry

  - by Caffeine Coma

  I'm trying to implement a kind of "guided typing" widget for data entry, in which the user's text entry is highly controlled and filtered. When the user types a particular character I need to intercept and filter it before displaying it in the widget. Imagine if you will, a Unix shell embedded as a webapp; that's the kind of thing I'm trying to implement. I've tried two approaches. In the first, I extend a TextArea, and add a KeyPressHandler to filter the characters. This works, but the browser-provided spelling correction is totally inappropriate, and I don't see how to turn it off. I've tried: DOM.setElementProperty(textArea.getElement(), "spellcheck", "false"); But that seems to have no effect- I still get the red underlines over "typos". In the second approach I use a FocusWidget to get KeyPress events, and a separate Label or HTML widget to present the filtered characters back to the user. This avoids the spelling correction issue, but since the FocusWidget is not a TextArea, the browser tends to intercept certain typed characters for internal use; e.g. FireFox will use the "/" character to begin a "Quick Find" on the page, and hitting Backspace will load the previous web page. Is there a better way to accomplish what I'm trying to do?

  Read the article

• Apache Content negotiation returns wrong Content-Type with Mulitviews :(

  - by edbras

  I am using Apache webserver 2.2 with Content Negotiation through Multiviews. I have: <Directory /home/develop/web/prodBuild> Options +MultiViews AddEncoding x-gzip .gz </Directory> This directory contains the gzip files. So if a browser requests the file bla.js, the server will return the file bla.js.gz as the file bla.js doesn't exists. However, the Content-Type on my Ubuntu server is set to be "application/x-gzip" which is wrong as it's a javascript file, so is has be "application/javascript" I have this working on my local Windows Apache server, but don't seem to get it working on the remote Ubuntu server. :(... NO idea why... Who/why is it setting this wrong Content-Type ? BTW: I don't have this line "AddType application/x-gzip .gz .tgz" somwhere in my config, as then I understand why it goes wrong. My workaround: add the following line under the above "AddEncoding": AddType "" .gz It will then set an empty string as Content-Type and then it works.. I think that the browser will try to discover the content type itself... I hope somebody can explain to me why this is not working and why this content type is set ? :(

  Read the article

• Best way to migrate export/import from SQL Server to oracle

  - by matao

  Hi guys! I'm faced with needing access for reporting to some data that lives in Oracle and other data that lives in a SQL Server 2000 database. For various reasons these live on different sides of a firewall. Now we're looking at doing an export/import from sql server to oracle and I'd like some advice on the best way to go about it... The procedure will need to be fully automated and run nightly, so that excludes using the SQL developer tools. I also can't make a live link between databases from our (oracle) side as the firewall is in the way. The data needs to be transformed in the process from a star schema to a de-normalised table ready for reporting. What I'm thinking about is writing a monster query for SQL Server (which I mostly have already) that will denormalise and read out the data from SQL Server into a flat file using the sql server equivalent of sqlplus as a scheduled task, dump into a Well Known Location, then on the oracle side have a cron job that copies down the file and loads it with sql loader and rebuilds indexes etc. This is all doable, but very manual. Is there one or a combination of FOSS or standard oracle/SQL Server tools that could automate this for me? the Irreducible complexity is the query on one side and building indexes on the other, but I would love to not have to write the CSV dumping detail or the SQL loader script, just say dump this view out to CSV on one side, and on the other truncate and insert into this table from CSV and not worry about mapping column names and all other arcane sqlldr voodoo... best practices? thoughts? comments? edit: I have about 50+ columns all of varying types and lengths in my dataset, which is why I'd prefer to not have to write out how to generate and map each single column...

  Read the article

• Javascript to check if there is flash player installed and redirect to the neededn page.

  - by themajiks

  Hi. I have this script. This determines if there is a flash player installed in the browser, it redirects the browser to a flash website. if not, then it opens a non-flash website. The Code is here: <SCRIPT LANGUAGE="JavaScript"> <!-- if ((navigator.appName == "Microsoft Internet Explorer" && navigator.appVersion.indexOf("Mac") == -1 && navigator.appVersion.indexOf("3.1") == -1) || (navigator.plugins && navigator.plugins["Shockwave Flash"])|| navigator.plugins["Shockwave Flash 2.0"]){ window.location='flash/index.html'; } else { window.location='index.html'; } --> </SCRIPT> What i want is to embed this code in the non-flash index page. it should just check if there is no flash then simply go with the current index file that already has been opened, or if there is no flash player, then load the index file from within the flash website. Currently, when index.html (non-flash) is opened, it goes into loop and keeps on checking for the flash player. Can I modify the window.location='index.html'; statement no to load any file here, just go on with the file already opened.??

  Read the article

• unhandled exception Handler in .Net 3.5 SP1

  - by Ruony

  Hi. I'm converting my own web browser use WPF from Windows XP to Windows 7. when I test on Windows XP, It has no error and exceptions. But I convert and test on Windows 7 with Multi-touch Library, My Browser occurred unhandled exception. Source: PresentationCore Message: An unspecified error occurred on the render thread. StackTrace: at System.Windows.Media.MediaContext.**NotifyPartitionIsZombie**(Int32 failureCode) at System.Windows.Media.MediaContext.NotifyChannelMessage() at System.Windows.Interop.HwndTarget.HandleMessage(Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Interop.HwndSource.HwndTargetFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) InnerException: null I want to know where the bug occurred. That Trace Message are garbage information for me. I already googling to know that message, but i never found any information. How do I get exactly function where the bug occurred? please tell me something.

  Read the article

• PHP.ini Settings Are Ignored By PHP5.3.5 Running With Windows 7 And Apache 2.2.15

  - by Andy

  I did an install of PHP5.3.5 on Windows 7 Home Premium using the MSI installer download. I got it to overwrite a previous version of PHP5 in C:\php5\ When first testing it, the server failed to start. I fixed this by adding the path to PHP in the Apache2.2 httpd file where the installer had inserted 2 lines of coded pointing to the ini file directory and the PHP DLL but had left out the directory path. After doing this, the server starts ok and I can run phpinfo to view the PHP settings in my web browser on local host. In the phpinfo it states that the loaded configuration file is C:\php5\php.ini as expected. But if I make any changes to the settings, and reboot the server, none of the changes are reflected in phpinfo. Yes, I do refresh the browser window. If I rename the php.ini to something else to make it invisible phpinfo then correctly identifies that there is no php.ini file loaded. So the settings in php.ini are being ignored and some default settings are being used (but I have no idea where these are derived from). As far as I can tell, there are no other php.ini files on my computer. In phpinfo it states that the Configuration File (php.ini) Path is C:\Windows but this is the same as on a Windows XP computer that I work on. And in the windows folder I don't see any php.ini file. In the windows registry, there is no mention of PHP5, and the PATH environment variable starts with C:\php5\; So hopefully someone can suggest how I can get PHP5 to take notice of the C:\php5\php.ini settings. :)

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >