Search Results

Search found 32994 results on 1320 pages for 'second level cache'.

Page 402/1320 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

  • iSCSI Disconnects every 30 minutes

    - by Steve Evans
    Every 30 minutes, almost by clockwork, a get the following error on my Windows 2008 R2 servers: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *10.2.62.3 0003260 B06BDRV\L4SC&PCI_163A14E4&SUBSYS_045F1028&REV_20\5&cabe3b7&0&30050200_0 I have 12 identically built servers connected to this iSCSI network and they are all seeing this issue. I've updated drivers and firmware levels without any change. Any other obvious things I should try before engaging my network team and the vendors.

    Read the article

  • Why does clicking on Windows 7 Printer Properties Result In Driver Not Installed?

    - by octopusgrabbus
    The question I need to ask is has anyone heard of getting a "driver not installed" error when clicking on a printer's properties on Windows 7, and is there a workaround? Here are the details of the problem. One of our users has a Windows 7 desktop, and an HP LaserJet 4050 T connected to via a parallel-to-usb converter. The PLC5 universal driver was installed for series 4050 printers. I needed to install the PLC 6 driver, which completed successfully. The user is an administrator of the system, and I was prompted to and accepted running as Administrator to install the driver. After the install, I went to see the 4050's properties and was prompted that the PLC6 driver was not installed. I believe the PLC6 driver was installed, because the PLC5 driver resulted in receiving an official HP error page indicating the printer was "not set up for collating" as the second page of printing two copies of a one page email. This problem did not occur with the PLC 6 driver. Oddly enough, setting back to PLC5 produced the same error about the PLC5 driver not being installed. I ignored/dismissed the error box (did not re-install the driver), and reproduced the error, with the second page being the HP not set up for collating error page. Any thoughts on what is causing this and how to clear it would be appreciated. The closest fix I could find was on a Microsoft tech page, and they had me clear winsock out of a Administrator run command line, followed by a reboot. That did not fix the problem. I have also found this http://social.technet.microsoft.com/Forums/windowsserver/en-US/5101195b-3aca-4699-9a06-db4578614e2d/changing-driver-results-in-printer-driver-is-not-installed-error-on-server-2008?forum=winserverprint and will look into trying some of these suggestions, which appear to me to be a "shotgun" approach to fixing the problem.

    Read the article

  • Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

    - by Matt Taylor
    I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

    Read the article

  • Can I make TCP/IP session to run less than 60 seconds?

    - by par
    Our server is overloaded with TCP/IP sessions, we have 1200 - 1500 of them. Most of them are hanging in TIME_OUT state. It turns out that a connection in TIME_OUT state occupies a socket until 60 second time-out is elapsed. The problem is that the server gets unresponsive and many clients are not getting served. I have made a simple test: download an XML file from the server with Internet Explorer 8.0 The download finishes in a fraction of second. But then I see that the TCP/IP connection is hanging in TIME_OUT state for 60 seconds. Is there any way to get rid of TIME_OUT waiting or make it less to free the socket for new connections? I understand why TCP/IP connection enters TIME_OUT state, but I don't understand why Internet Explorer does not close the connection after the XML file download is over. The details. Our server runs web service written in Perl (mod-perl). The service provides weather data to clients. Client is a Flash appication (actually Flash ActiveX control embedded in Windows application). OS: Ubuntu Apache "Keep Alive" option is set to 0

    Read the article

  • Ram question in VMware Server 2

    - by ToreTrygg
    Hi, I understand from the VMware Server 2 documentation that VMware Server 2 is capable of running a 64-bit guest OS underneath a 32-bit host OS, as long as the hardware running the box is 64-bit capable. Here's my situation. We currently have an underutilized XEON X3220 Quad Core 64bit Server, running Server 2003, 32-bit and 2gb of RAM (the motherboard is capable of 8gb ram). The server is currently used mainly for file and print services. It is also running Active Directory, Novell eDirectory and Groupwise 6.5. We are planning a micration to Microsoft Exchange, so the Novell eDirectory and Groupwise services will eventually be purged from this box, leaving only Active Directory, File and Print services. Being that this server is underutilized we are hoping to save hardware costs and virtualize our new Exchange investment. My question is this. Will VMware allow access to the "invisible" extra memory that Windows 32-bit won't see. Meaning, if we increase the full amount of system ram to 8gb (yes, I know the 32-bit host OS will only see a maximum of 4gb), will I be able to assign maybe 5gb to the new Server 2008 64-bit OS running Exchange and leave 3gb for the Guest OS (or maybe even a 6, 2 split). The second part of that would be, would it be better to just convert the main OS currently running to an image, convert the machine itself to ESXi and run both OSes as images under ESXi. Downtime for this box is critical, so my preference is most definitly with the first option because it presents very minimal downtime. Doing the second would make downtime quite a few hours to image the machine and then convert the image to a VMware Image.

    Read the article

  • http://localhost/ always gives 502 unknown host

    - by Nitesh Panchal
    My service for World Wide Web Publishing Service started successfully but whenever I browse to http://localhost/ I always get 502 Unknown host. Also, wampapache is installed side by side but when I stop IIS service and start wampapache from services.msc I get error and when I view it in System event log I get this error: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7024</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2011-06-12T17:43:28.223498400Z" /> <EventRecordID>346799</EventRecordID> <Correlation /> <Execution ProcessID="456" ThreadID="3936" /> <Channel>System</Channel> <Computer>MACHINENAME</Computer> <Security /> </System> - <EventData> <Data Name="param1">wampapache</Data> <Data Name="param2">%%1</Data> </EventData> </Event> I am fed up of this error and it is driving me nuts. I feel like banging my head against the laptop. I am really serious. Without concentrating on my real application I am trying to solve this issue since 3 hours. I google various threads and few of them said that there could be issue of Reporting Services or Skype. But I have uninstalled Skype and Reporting Services are disabled. What more should I do? I have hosts file present in etc directory and it does have mapping for localhost to 127.0.0.1. What more could I do?

    Read the article

  • iptables & allowed port refusing connection

    - by marfarma
    Can you see what I'm doing wrong? On Ubuntu Server 9.1, I'm attempting to allow traffic on port 1143 for a non-privileged IMAP host. Connection is refused when testing with telnet example.com 1143 but connection is allowed testing with telnet example.com 80 from my pc to remote internet hosted server. Both rules appear identical and are located near each other with no rules rejecting connections intervening in the rules file. I can't figure it out. iptables -L returns this: Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere REJECT all -- anywhere 127.0.0.0/8 reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http-alt ACCEPT tcp -- anywhere anywhere tcp dpt:7070 ACCEPT tcp -- anywhere anywhere tcp dpt:1143 ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh ACCEPT icmp -- anywhere anywhere icmp echo-request LOG all -- anywhere anywhere limit: avg 5/min burst 5 LOG level debug prefix `iptables denied: ' REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere and my rules file contains this: # Generated by iptables-save v1.4.4 on Wed May 26 19:08:34 2010 *nat :PREROUTING ACCEPT [3556:217296] :POSTROUTING ACCEPT [6909:414847] :OUTPUT ACCEPT [6909:414847] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 8080 COMMIT # Completed on Wed May 26 19:08:34 2010 # Generated by iptables-save v1.4.4 on Wed May 26 19:08:34 2010 *filter :INPUT ACCEPT [1:52] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1:212] -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 ! -i lo -j REJECT --reject-with icmp-port-unreachable -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -j ACCEPT -A INPUT -p tcp -m tcp --dport 7070 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1143 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 -A INPUT -j REJECT --reject-with icmp-port-unreachable -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -j ACCEPT COMMIT # Completed on Wed May 26 19:08:34 2010

    Read the article

  • Secure data hosting...

    - by kylex
    I've looked online and can't seem to find a proper answer. We have a client that requires very sensitive data be stored in a database. Is there a hosting company that provides high-level database security (this is for a bank).

    Read the article

  • Why does my exchange message filtering rule not work?

    - by Jon Cage
    I have two rules set up to sort incoming bug reports. The first is specific to a single device: Apply this rule after the message arrives sent to SMS Distribution and with <source_device_number>: in the body move it to the BugReports\<source_device_number> folder ..and the second is a catch-all for everything else: Apply this rule after the message arrives sent to SMS Distribution move it to the BugReports folder For some reason though, the first rule never seems to act even though it's higher in the list. So for some reason an email like the following doesn't seem to get caught by the first rule: From: <SourceDeviceUID> To: SMS Distributor Subject: Message from <SourceDeviceUID> Message: <source_device_number>: Device encountered a problem. Details below... ...where <source_device_number> is an integer. The second rule works fine. But for some high-priority devices, I want them automatically sorted. Why might that first rule fail?

    Read the article

  • HP DL380 using HP NC522SFP NIC shows supported link modes: not reported

    - by MikeS
    When using ethtool on this NIC, the supported link modes show "not reported". Any idea why this is the case? Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 1 Transceiver: external Auto-negotiation: off Supports Wake-on: g Wake-on: g Current message level: 0x00002000 (8192) hw Link detected: yes

    Read the article

  • Can two mocha for After Effects X-Spline Layers be merged ?

    - by George Profenza
    Hello, I'm new to mocha for After Effects, but like the auto tracking feature. There are a few markers I'm adding, but there's one which is giving me a bit of a headache. I'm tracking a circle that moves around a larger object, so it moves in front of it initially, then behind, being occluded by the larger object, then in front again. I tried to track the circle in the first part(when it's in front, before being occluded) and in the second part(when it's in front again, coming out on the other side of the large object) using a single X-Spline. The problem is the second part starts in a different location and I don't know how to 'move' the X-Spline to the new position and track from there, without affecting the previous keyframes. As a workaround I use two X-Spline Layers, export the data to .txt files, then manually merge the two files into a new one containing keyframes from both X-Spline Layers. Is there an easier way to do this (either merging two X-Spline Layer, or using a single X-Spline Layer that can move to a new location without affecting previous keyframes) ? Any suggestion would help.

    Read the article

  • What is a good third-party SMTP software for custom logging?

    - by Lorcan O'Neill
    I am currently using IIS 6 SMTP to send out some of our mail and I unfortunately amn't finding the logging performed by it to be verbose enough - nor am I able to customise it to the level I would find verbose enough. I'm wondering if anyone can recommend a piece of third-party SMTP software which would allow for customisability of the logging down to the point where I can inject in my own columns or perform regular expressions on the outgoing message data or headers.

    Read the article

  • Xeon X3220 Dual-Core 2.4 GHz - which march setting for gcc?

    - by hurikhan77
    Should I use -march=nocona or -march=core2 when compiling binaries for this processor with gcc 4.3? vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Xeon(R) CPU X3220 @ 2.40GHz stepping : 8 cpuid level : 10 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx lm constant_tsc arch_perfmon pebs bts rep_good pni ssse3 cx16 lahf_lm I cannot really find if this CPU is already core2 architecture... Only find information about the quad core variants, but this CPU is only dual core.

    Read the article

  • Can anyone recommend a decent tool for optimizing images other than Photoshop

    - by toomanyairmiles
    Can anyone recommend a decent tool for optimising images other than adobe photoshop, the gimp etc? I'm looking to optimise images for the web preferably online and free. Basically I have a client who can't install additional software on their work PC but needs to optimise photographs and other images for their website and is presently uploading 1 or 2 Mb files. On a personal level I'm interested to see what other people are using...

    Read the article

  • lvm mirroring space unavailable.

    - by Bryan Ward
    I am trying to migrate my data on lvm to two new disks, and setup mirroring between the two. I have successfully migrated all of the data to the first of the two disks, leaving the second one completely available as a mirror. I verified this using pvdisplay -m /dev/sd{g,h}1 --- Physical volume --- PV Name /dev/sdg1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 82866 Allocated PE 155600 PV UUID v2nc3j-EFBR-QpuG-xgro-Rm59-fmu6-IB3QcR --- Physical Segments --- Physical extent 0 to 49999: Logical volume /dev/vg/videos Logical extents 0 to 49999 Physical extent 50000 to 99999: Logical volume /dev/vg/home Logical extents 0 to 49999 Physical extent 100000 to 129999: Logical volume /dev/vg/music Logical extents 0 to 29999 Physical extent 130000 to 155599: Logical volume /dev/vg/videos Logical extents 50000 to 75599 Physical extent 155600 to 238465: FREE --- Physical volume --- PV Name /dev/sdh1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 238466 Allocated PE 0 PV UUID LuTrem-WcsZ-qw7l-2CDS-lLKI-wdq0-QEXhLf --- Physical Segments --- Physical extent 0 to 238465: FREE Then when I try to mirror the home logical volume for example, it says that I do not have sufficient space. I used lvconvert -m1 vg/home and the output was: Insufficient suitable allocatable extents for logical volume : 50000 more required Unable to allocate extents for mirror(s). This puzzling to me because it appears as if there is plenty of space on the second disk to mirror. Is there something I have done wrong here? Or is there a way to explicitly tell LVM where to put each leg of the mirror? I'm using lvm2.

    Read the article

  • Server 2003 PDC DNS not working..Failover server is...

    - by Seth
    In the midst of trying to utilize proc power, i create a fault tolerant DNS server a while ago. Since, Ive been trying to add another controller for exchange. So I thought I would revert back to a single primary DNS for the meantime and now Im balancing on a thread. The server i thought I uninstalled DNS, is still acting as DNS. And now the PDC does not resolve. Can anybody walk me through, Im overwhelmed and cant think straight... Im afraid if anyone restarts their machine they wont have internet. Update Ok so from the beginning. I was configuring Exchange on a new server 2008. How it happened I dont know, but it started to not resolve DNS. (exclamation mark on NIC) even though everything was static. So ultimately I decided to remove the server from the problem, because I noticed DNS was in disarray if I used the DNS IP of the first server. This is when I tested with nslookup on each DNS server. I had uninstalled DNS from the second server, but nslookup was still resolving with that IPaddress, which has me all wound up cause I dont understand. So, since the first DNS server isn't resolving, Im assuming if the second one isnt configured right I'll loose internet. Im just confused and dont know where to start troubleshooting...

    Read the article

  • Change owner recursively with Powershell?

    - by Mikael Grönfelt
    I'm trying to use Powershell to change owner of a folder, recursively. I'm basically using this code: $acct1 = New-Object System.Security.Principal.NTAccount('DOMAIN\Enterprise Admins') $profilefolder = Get-Item MyFolder $acl1 = $profilefolder.GetAccessControl() $acl1.SetOwner($acct1) set-acl -aclobject $acl1 -path MyFolder This will change ownership at the first level, but not for any subfolders or files. Is there a way to extend the scope to all content of MyFolder?

    Read the article

  • Apache2 VirtualHosts 403 Oddity

    - by Carson C.
    I'm sure this is something I should already understand, but I'm finding myself confused. The configs in play add up to this: NameVirtualHost *:80 Listen 80 <VirtualHost *:80> <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName domain.tld ServerAlias *.domain.tld DocumentRoot /var/www/domain.tld <Directory /var/www/domain.tld> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> DNS is working correctly. The issue is, every variant of http://*.domain.tld/ (including http://domain.tld/) works correctly, except http://www.domain.tld/ which throws a 403. The logs state: client denied by server configuration: /etc/apache2/htdocs If I remove the first VirtualHost block from play, everything works as expected including http://www.domain.tld. This leads me to believe that for some reason, Apache is not considering www.domain.tld to match the second VirtualHost block, and is thereby falling back to deny all. This seems wrong. Shouldn't the second block match www.domain.tld? I've been able to resolve this, but I still don't understand why. In my original configs, I was using the real ip address of the server instead of *. Switching all instances to * as shown above made everything work as expected. Does this have something to do with the way browsers request resources?

    Read the article

  • Windows PE autorun scripts

    - by tearman
    I've set up a Windows Preinstallation Environment on a USB Thumb Drive (version from the latest iteration of the Windows Automated Install Kit/WAIK), and I'm working on getting a deployment environment set up. However, we'd like to make it so our Level 1 technicians can use the deployment system, and because of this, I've written several batch files to minimize the amount of command line work the technicians have to do. Is there a way I can get these scripts to autorun after the PE environment has finished initializing?

    Read the article

  • How to convert an MKV to AVI with minimal loss

    - by Linux Jedi
    To convert an MKV to AVI, I do two things. The first thing I do is this: ffmpeg -i filename.mkv -vcodec copy -acodec copy output.avi This converts the MKV to an AVI, but the problem is that the video does not play smoothly for some reason. That's fine, because if I do one more thing it gets fixed: ffmpeg -i output.avi -vcodec mpeg4 -b 4000k -acodec mp2 -ab 320k converted.avi After I do this then the file plays without problem. I had success doing it this way for one file, but then I tried it on another file, and there is a slight, but noticeable loss in video quality. This is the output I get when doing the second step: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 0 codec frame rate differs from container frame rate: 359.00 (359/1) -> 29.92 (359/12) Input #0, avi, from 'output.avi': Metadata: ISFT : Lavf52.64.2 Duration: 00:04:17.21, start: 0.000000, bitrate: 3074 kb/s Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], 29.92 fps, 29.92 tbr, 29.92 tbn, 359 tbc Stream #0.1: Audio: vorbis, 48000 Hz, stereo, s16 Output #0, avi, to 'nidome_no_kanojo.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], q=2-31, 4000 kb/s, 29.92 tbn, 29.92 tbc Stream #0.1: Audio: mp2, 48000 Hz, stereo, s16, 320 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 I just used arbitrarily large settings on the second step and it worked nicely before but not in this case. What settings should I use?

    Read the article

  • Domain: Netlogon event sequence

    - by Bob
    I'm getting really confused, reading tutorials from SAMBA howto, which is hell of a mess. Could you write step-by-step, what events happen upon NetLogon? Or in particular, I can't get these things: I really can't get the mechanism of action of LDAP and its role. Should I think of Active Directory LDS as of its superset? What're the other roles of AD and why this term is nearly a synonym of term "domain"? What's the role of LDAP in the remote login sequence? Does it store roaming user profiles? Does it store anything else? How it is called (are there any upper-level or lower-level services that use it in the course of NetLogon)? How do I join a domain. On the client machine I just use the Domain Controller admin credentials, but how do I prepare the Domain Controller for a new machine to join it. What's that deal of Machine trust accounts? How it is used? Suppose, I've just configured a machine to join a domain, created its machine trust, added its data to the domain controller. How would that machine find WINS server to query it for Domain Controller NetBIOS name? Does any computer name, ending with <1C type, correspond to domain controller? In what cases Kerberos and LM/NTLM are used for authentication? Where are password hashes stored in, say, Windows2000 domain controller? Right in the registry? What is SAM - is it a service, responsible for authentication and sending/storing those passwords and accompanying information, such as groups policies etc.? Who calls it? Does it use Active Directory? What's the role of NetBIOS except by name service? Can you exemplify a scenario of its usage as a "datagram distribution service for connectionless communication" or "session service for connection-oriented communication"? (quoted taken from http://en.wikipedia.org/wiki/NetBIOS_Frames_protocol description of NetBIOS roles) Thanks and sorry for many questions.

    Read the article

  • how to setup kismet.conf on Ubuntu

    - by Registered User
    I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

    Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >