Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 404/551 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• Ping, firewall or DNS issue on Win Server 2008 R2

  - by Fred Kaiser

  I've installed windows server 2008 as a VM for the developers here to work on. Installed SQL Server 2008 as well as IIS7. I am not quite sure why, I can remote into that machine using the name I gave to it (winserverdev) but the guys that are supposed to use the bloody thing can't. One very interesting thing is that I can connect but I can't ping... not the name nor the IP address. Is there anything that I should be looking in order to make it work? Any ideas are welcome. Thanks heaps in advance, I really appreciate it.

  Read the article

• Domain pointing to wrong subscription in Plesk 10

  - by Michal Gow

  I recently moved a domain name in the Plesk 10 control panel from one subscription to another. DNS is managed by another server so there is no change in DNS at all. The IP address is shared and remains the same so there is really no need for a DNS change. But the domain is still managed by its former subscription (where it should have been removed from) and is pointing to exactly the same folder as in the past, even when is not in the list of domains there. Subsequently, the new subscription do not have the domain under its control. Even this domain is in list of domains here and points to another folder.

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• Routing and Remote access rule not being applied internally (Windows SBS)

  - by Tim Saunders

  Hi, I have a Microsoft Small Business Server. I have pointed an external domain name to the external fixed IP address for the server. In routing and remote access I have defined a service for our subversion server as follows: Incoming port: 8443 Private address: 192.168.10.5 Outgoing port: 8443 192.168.10.5 is our development server, not the SBS (which is at 192.168.10.1) This rule works correctly if I am not on our internal network. However if I am on the internal network this rule does not get applied. What can I do/set so this rule is applied both internally and externally (so users with laptops et, don't keep having to change the URL by which they access the subversion server) Not sure what other info you may need, so please let me know if more details are required. T

  Read the article

• Accesing internet with Host-Only network VirtualBox

  - by Bibo

  I have two VMs in my VirtualBox. Both are FreeBSD and should communicate between each other. I have created network with DHCP enabled and set like this: Server Address 10.10.10.1 Server Mask 255.255.255.0 Lower Address Bound 10.10.10.100 Upper Address Bound 10.10.10.200 My VMs are pinging each other and getting right ip adress. This is what I must have and can´t change. Now I want to access internet from one VM and I found that I must use two network cards but I don´t know how to set the second one. I am new with VirtualBox and this stuff so if you count with this in you answer I would appreciate that. And I have Windows 8 as host system if it´s matter.

  Read the article

• Can we put random URL entries on DNS

  - by ring bearer

  Using microsoft DNS All/most of our local hosts ( with in ) are in following domain *.company.org So a host name will look like mymachine001.company.org Is it possible to set up wild card DNS entries of the form ? *.subd.company.com Note: The URL ends with .com, all other hosts so far ever set up in the DNS were of the format *.company.org what i am trying to achieve is the following. A user with in internal network types a url http://someprefix.subd.company.com in browser and enters. Since there is a wild card entry in DNS, the user gets routed to host mapped to *.subd.company.com in the DNS Note : at the same time, company.com has a public DNS entry and that is mapped to a physical IP in some other network (data center)

  Read the article

• Access Denied on LAN IIS Access via Integrated Authentication

  - by Pharao2k

  I have an IIS 7.5 (Win2k8R2) Webserver, which publishes an UNC Share (on a Fileserver) with restricted access. The AppPool Identity is a Domain User-Account with read access to mentioned UNC path. Authentication modes are set to Anonymous and Integration Authentication. When I access the path via localhost from the Webserver itself, it works, but if I try the Hostname or IP from either the Webserver or a Client, I get three authentication prompts (does not accept my credentials) and a 401.3 Unauthorized error message (but it states that I am logged in as my normal credentials which definitely have access rights to the UNC path and its files). Security Zone is set to Local Intranet. Sysiniternals Process Monitor lists CreateFile operations on the UNC path (and other existing files in it) with Access Denied and Impersonating on the correct credentials. I don't understand why it is not working, it seems to use the correct credentials on every step on the way but fails with is operations.

  Read the article

• Apache does not serve non-locally

  - by yodaj007

  I have a freshly installed instance of Fedora Core 16 inside VirtualBox using bridged networking. On it, as root I typed in: yum -y install httpd service httpd start ifconfig Inside the VM, I can open a web browser to 'localhost' and I get the Apache test page. It works. But in Windows (the machine hosting the VM), I point my browser to the IP address returned by ifconfig (192.168.2.122). The connection times out. I can go to a command prompt and ping the VM. Is there a firewall or something that comes with Fedora by default? Or is there something I need to change in a config file?

  Read the article

• Enabling SFTP Access within PLESK

  - by spelley

  I have a client who wants to ensure his upload is secure, so we are trying to enable SFTP for him on our Linux PLESK server. I have enabled SSH access to bin/bash for FTP accounts, and created a new user. When I attempt to SFTP using either the IP address or the domain name, this is the error FileZilla is giving me: Error: Authentication failed. Error: Critical error Error: Could not connect to server Here is some basic information regarding the server: Operating system Linux 2.6.24.5-20080421a Plesk Control Panel version psa v8.6.0_build86080930.03 os_CentOS 5 I had read in some places that I should reboot the SSH Service in Server - Services, however, there is no SSH Service within the list. I'm not really a server guy so it's quite possible I'm missing something obvious. Thanks for any help that you guys can provide!

  Read the article

• Debian pure-ftpd, Restrict access

  - by durduvakis

  I am running Debian Wheezy, with ISPConfig 3, plus ModSecurity and I would like to restrict access to ftp to specific IP(s) globally (not to specific ftp users only), that can be either 127.0.0.1 or one I would manually add later. I would also like to completely disable ftp access from the web, but allow only from ftp-client software (if that is possible). The idea of closing firewall ports is not what I want. I know I can do this setting some firewall rule though, but that is not what I currently need. I have managed to do this for example on phpmyadmin inside it's .conf file, but unfortunately I cannot find any configuration to alter for pure-ftpd in my system. Restricting web-ftp access maybe possible by adding some rule in apache2 conf, but I am not sure how to write such a rule. Thanks to everyone that can help cheers

  Read the article

• How should I troubleshoot a problematic wireless connection on Linux?

  - by Gearoid Murphy

  I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• How to troubleshoot ping request time out

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• Ejabberd Clustering on EC2

  - by Architact

  I am trying to implement ejabberd clustering on Amazon EC2 instances, I have installed ejabberd and it is working fine on both instances, I can connect and send message, my first server is a master server and has the FQDN of master.example.com, second server is a slave and has FQDN of slave.example.com. I have edited the ejabberdctl.cfg file on both instances changed INET_DIST_INTERFACE on both instances to the value returned by ifconfig changed ERLANG_NODE to [email protected] on master and [email protected] on slave. Now when I run this command on slave net_adm:ping('[email protected]'). it always returns pang response indicating that it can't reach the master server. I am looking for possible fixes for that. Things already done Both master and slave domains are pointing to their instances I even tried allocating elastic ip and assigning that to instances, but did not help either. Any help will be greatly appreciated.

  Read the article

• My site was recently attacked. What do I do?

  - by ChrisH

  This is a first for me. One of the sites I run was recently attacked. Not at all an intelligent attack - pure brute force - hit every page and every non-page with every extension possible. Posted with garbage data to every form and tried to post to some random urls too. All tod, 16000 requests in one hour. What should I do to prevent/alert this kind of behavior? Is there a way to limit the request/hr for a given ip/client? Is there a place I should be reporting the user to? They appear to be from China and did leave what seems like a valid e-mail.

  Read the article

• MySQL will Stop working after being Started

  - by user115343

  i am new to a webserver thing. I use Centmin mod to install nginx + mariaDB to setup small wordpress blog,the first day it is ok,there are nice "hello world" on my box's IP,but today i have checked that mysql is stop working so i immediately start it again but it is stoped again after some minutes! i use this tutorial but still,it will stop after some period here is my log [root@rylai ~]# tail -f /var/log/mysqld.log 120326 16:19:05 [Note] Plugin 'PBXT_STATISTICS' is disabled. 120326 16:19:05 [Note] Plugin 'InnoDB' is disabled. 120326 16:19:06 [Note] Event Scheduler: Loaded 0 events 120326 16:19:06 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.2.10-MariaDB-mariadb107' socket: '/var/lib/mysql/mysql.sock' port: 3306 (MariaDB - http://mariadb.com/) 120326 16:20:36 mysqld_safe Number of processes running now: 0 120326 16:20:36 mysqld_safe mysqld restarted 120326 16:20:39 [Note] Plugin 'ARCHIVE' is disabled. 120326 16:20:39 [Note] Plugin 'FEDERATED' is disabled. 120326 16:20:40 mysqld_safe mysqld from pid file /var/lib/mysql/rylai.pid ended I only access mysql on CLI,didnt install any panel yet

  Read the article

• Does a bad Internet connection increase bandwidth usage?

  - by Synetech

  My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

  Read the article

• Changing shared printer settings to default to greyscale

  - by Chris

  My company has about 60 employees all running Windows Vista or 7 and a gigantic Minolta printer hooked up to an EFI Fiery Image Processor. We're burning about $300 a month in printer supplies alone. I'm trying to find a way to cause the printer to default to grayscale in order to save money. So far I've tried: Changing settings on the image processor Changing settings on the print server Looking through the Group Policy editor to see if I can find anything useful Creating a new printer on the print server and setting it to be grayscale only Adding the printer to my computer directly (through a TCP/IP port) and setting it to be greyscale only Has anybody successfully done this before? If so, how was it gone about? I don't expect anybody to know the specifics of my environment, I just not sure what the right direction is.

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• Fortigate VPN Routing issue

  - by user1571299

  I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a VPN ontop of WAN2 with that specific site as it's destination. The default route for my end is WAN1. My problem is I cant figure out how to have both tunnels up at the same time. What's the best practice for achieving this? Thanks

  Read the article

• How to share my localhost over the internet?

  - by Loolooii

  I really want to share my localhost over the internet to show my friends the progress of the website we're working on, so that I don't need to upload it to the public server each time I make a change. showoff.io is not free and localtunnel gives me "failed to authenticate" when trying to upload my public key (a lot of people seem to have this problem and there doesn't seem to be a solution for this). Does anyone know any other free service I can use or any other solution at all? I'm using a Mac. Thanks. UPDATE: with localhost I mean a web server running on my computer, I have a dynamic IP address and no I'm not behind a router (just using a wireless modem).

  Read the article

• how long does noip ddns takes to make the updated address again accessible?

  - by neoDev

  Yesterday I've created a noip account, I've downloaded the updater client (DUC), I've configured them, and when I've tryied to browse "myaddress.noip.me" all worked fine... When my WAN IP changes, the DUC client quickly updates it in few minutes, and in my account on noip.com I can see that it is also refreshed properly. But the problem is that if I try to browse "myaddress.noip.me" after that update, the page does not load... "Unable to connect to myaddress.noip.me" After 6-7 hours it becomes again accessible, but I'm not sure if this is normal... I think this is too much time... Please help

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >