Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 406/551 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

• Wireless is connected but no internet when PC Turns on

  - by mhesabi

  I have a PC that is connected to ADSL Modem router (linksys WAG54g2) directly via Ethernet cable And a laptop and also other devices such as another laptops and smarth phones. However when I turn On the PC or turn it off, some strange problem happens. My wireless network seems connected on laptop but there is no internet activity and can't open a webpage until I turn router off and on again manually. (other devices including the PC itself can't use the internet either) My router configured this way: Encapsulation: RFC 2516 PPPoE Multiplexing: LLC DHCP Server: Enabled and network sharing center IPv4 configuration is obtain IP address automatically How Can I fix this issue?

  Read the article

• Dhcp clients fail after successful import of server to new machine

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• Why does Pages.app connect to a server through https and keep the connection open?

  - by ggustafsson

  Every time i start up the program Pages (iWork) it connects to a server through https. What is going on? Why would Apple do this? I use no features under Pages that could warrant this behaviour. It connects to IP address 2.22.240.224 on port 443 and keeps the connection open until i close the application. All the info i can get from Wireshark is a bunch of Apple-related domain names. Edit: The same thing happens with Numbers. I have disabled "Documents & Data" on iCloud so that shouldn't be the reason why. Edit 2: The programs in the iWork suite stopped doing this after recent updates so it's not an issue anymore.

  Read the article

• Virtual hosting in Varnish with individual vcl files for configuration

  - by Michael Sørensen

  I wish to use varnish to put in front of an apache and a tomcat on the same server. Depending on the ip requested, it goes to a different backend. This works. Now for most of the sites the default varnish logic will work just fine. However for some specific sites I wish to use custom VCL code. I can test for host name and include config files for the specific domains, but this only works inside the individual methods recv etc. Is there a way to include a complete set of instructions, in one file, per domain, without having to manage separate files for subdomain_recv, subdomain_fetch etc? And preferably without running seperate instances of varnish. When I try to include a file on the "root level" of default.vcl, I get a compilation error. Best regards, Michael

  Read the article

• Serve my website from different server during downtime

  - by nfedyashev.mp

  I have a VPS server running in the cloud. Fully automated server image upgrade/downgrade(by RAM/HDD plans). The problem is that server upgrade/downgrade takes time and involves total unavailability during this period(up to 30 minutes). Goal: during this downtime server my website(http://mydomain.here) from different server with some message like "Under construction". How can I do this? -- mydomain.here is hosted on godaddy and uses its DNS(If I call it right). It's pointing with A-record to my VPS's IP address now. Change in these DNS settings will take more than 30minutes, so it's not an option. How can I find mode "dynamic" DNS? What should I learn?

  Read the article

• Remote Software Solution that Acts as a Client

  - by Richard

  I am looking for something that I am not sure exists. I have a remote computer that will not allow incoming traffic due to ISP blocking of ports(basically double NAT situation that I am unable to get around). I am wondering if I have a computer acting as a client, is there any solution out there that will allow remote access to the computer. I do have other servers on the net that have static IP's that the computer could initiate a connection with. I am thinking of using Debian Linux, However computer is not built yet so OS is not overly important at this point.

  Read the article

• how to create xampp mysql remote connection within my office ,

  - by Ranjit Kumar

  Before asking this question : i have gone through this link How do I allow remote access to mysql using xampp? But i couldnt make it up !!! i have installed xampp using xamppinstaller.exe and its version is 3.1.0. i am heidisql Gui for database managament i tried the same by changing the # bind-address from "127.0.0.1" to my system ip address as # bind-address to "192.168.1.69" After changing and restarting my xampp mysql i went to other system and tried to login (hedisql) with the hostname 192.168.1.69 and it gave me an error saying Error 1130(0000): host' ....' is not allowed to connect to this mysql server. what should i do please help me !!

  Read the article

• What port should I use for my reverse proxy to Apache 2 from nginx?

  - by meder

  I have nginx setup as the defacto port 80. I want to setup django+mod_wsgi on Apache2. I'm worried if I leave Apache2 as 80 it will cause a conflict. Is it better to avoid the headache and change Apache to a different port? server { listen 80; server_name work.domain.org; access_log /www/work.domain.org/log/access.log; error_log /www/work.domain.org/log/error.log; location / { proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Magic-Header "secret"; client_max_body_size 10m; } }

  Read the article

• Django fails to find static files served by nginx

  - by Simon

  I know this is a really noobish question but I can't find any solution despite finding the problem trivial. I have a django application deployed with gunicorn. The static files are served by the nginx server with the following url : myserver.com/static/admin/css/base.css. However, my django application keep looking for the static files at myserver.com:8001/static/admin/css/base.css and is obviously failing (404). I don't know how to fix this. Is it a django or an nginx problem ? Here is my nginx configuration file : server { server_name myserver.com; access_log off; location /static/ { alias /home/myproject/static/; } location / { proxy_pass http://127.0.0.1:8001; proxy_set_header X-Forwarded-Host $server_name; proxy_set_header X-Real-IP $remote_addr; add_header P3P 'CP="ALL DSP COR PSAa PSDa OUR NOR ONL UNI COM NAV"'; } } Thanks for the help !

  Read the article

• Ping from windows 7 get no reply but sets errorlevel to 0

  - by Doron

  From a Windows 7 machine, I ping an IP address of a turned-off machine. C:\>ping 192.168.1.222 Pinging 192.168.1.222 with 32 bytes of data: Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Reply from 192.168.1.222: Destination host unreachable. Ping statistics for 192.168.1.222: Packets: Sent = 3, Received = 3, Lost = 0 (0% loss) Even though there is no reply, the errorlevel is set to 0. What I am trying to do, is figure out if a remote machine is replying to ping. One of my tests is to turn off the machine and ping it. For some reason, ping sets errorlevel to 0.

  Read the article

• mosh-like port forwarding

  - by Marc Merlin

  This is on linux, connecting to linux servers: I love mosh, but it doesn't support port forwarding, and likely won't for a while since it's been almost a year now and it hasn't happened yet. port forwarding over ssh is great, but because my laptop moves between networks several times a day, my ssh sessions die, and so do the port forwards. I could script/hack something to detect hung ssh and reconnect to get my port forwards back, but before I do this, is there another way to do long lasting port forwards when your source IP changes several times daily (because you go on different networks)? I'm thinking an ssh over UDP would do the trick but of course ssh is over TCP.

  Read the article

• RDP add domain users broken

  - by Robuust

  I have 3 servers, - domain controller with dns services - dhcp/rras - file/random server with files stored on it and nothing special so far. All servers have static IP's All servers are in the same domain (SOFTWARE) RDP is enabled for all 3 servers All servers are Windwos Server 2008 R2 I can connect to the DHCP/RRAS server via RDP I cannot connect to DC and File server When I add RPD users (both are domain admin for testing) to the File server they show up like this: What is happening what I don't see? And additional why don't I even get a login screen for RPD? Thanks in advance.

  Read the article

• VNC unattended Server (No user Interaction)

  - by Louis van Tonder

  I worked on a proof on concept a while ago.... whereby I managed to get VNC going in full "unattended" mode... I.e. The VNC Server dials into the viewer... which is running in Listening mode. The same concept of how single click works, but without the user interaction. I cant seem to locate my source files for this concept I worked on... although I have found my shortcut that worked on the Viewer side to listen. "C:\Program Files\UltraVNC\vncviewer.exe" -listen 5007 /noauto /256colors I can not however remember/locate my demo of what the server is doing.... how to configure it. If I remember correctly, the server was also started with command line params that "dialed" into a remote IP/port, that the viewer is listening on. Any ideas? Thanks

  Read the article

• Do I need a VPN to secure communication over a T1 line?

  - by Seth

  I have a dedicated T1 line that runs between my office and my data center. Both ends have public IP addresses. On both ends, we have a T1 routers which connect to SonicWall firewalls. The SonicWalls do a site-to-site VPN and handle the network translation, so the computers on the office network (10.0.100.x) can access the servers in the rack (10.0.103.x). So the question: can I just add a static route to the SonicWalls so each network can access each other with out the VPN? Are there security problems (such as, someone else adding the appropriate static route and being able to access either the office or the datacenter)? Is there another / better way to do it? The reason I'm looking at this is because the T1 is already a pretty small pipe, and having the VPN overhead makes connectivity really slow.

  Read the article

• vncviewer connection refused (61)

  - by coure2011

  I have a root access to VPS (centos 6). I have installed VNCServer using this guide line http://tournasdimitrios1.wordpress.com/2011/02/02/how-to-setup-vnc-server-on-centos-5-x-fedora-11/ Everything goes perfectly and server is running via termina. Now I am trying to connect to that server via vncviewer (mac os). but its giving me error Connection refused (61) I am providing only the IP address of the VPS, maybe I also needed port address? How to configure port on vncserver? or its something else?

  Read the article

• Sorting IPv4 Addresses

  - by Kumba

  So I've run into a quandary on sorting IPv4 addresses, and didn't know if there was a set rule in some obscure networking document. Do I do a straight sort on the raw address only (such as converting the IP address to a 32bit number and then sorting), do I factor in the CIDR via some mathematical formula, do I sort via the CIDR only (as if I'm comparing the network size and not the addresses directly)? I.e., normal math, we'd do something like -1 < 0 < 1 to denote the order of precedence. Given say, 10.1.0.0/16, 172.16.0.0/12, 192.168.1.0/24, and 192.168.1.42, what would be the order of precedence?

  Read the article

• Firewire 800 with Windows

  - by Amitesh

  I have two windows machine with windows server 2003 installed on them. I am running a Lab View script on 1 machine and storing the data. But since it has less memory, I want to transfer data to another machine using firewire 800. Is it possible to configure out the second machine just as an external HDD attached to it and write data directly to it? (This is possible with MACs) Dont want to use the ethernet (internet/ TCP/IP prot.) to transfer the data. Is it possible? Thanks.

  Read the article

• Unable to connect with PPTP (From Windows 8 to Ubuntu 12.10)

  - by jaja

  I'm trying to connect using PPTP to my VPS. At first, I got the problem that my connection (Wlan, which is what I use to connect to the Internet) goes "limited" (I can't connect to the Internet) when I connect to the VPN. Then, I used to get some long message, something like you might be trying using L2TP. Then now it's back again to the "limited" problem. What's the solution to that problem? One thing I'm not sure of is what I put as my local IP address in "sudo nano /etc/pptpd.conf" Is it 127.0.0.1? I'm following this tutorial: http://thesinclairs.gotdns.com/blog/set-up-a-pptp-vpn-on-ubuntu-server/

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• nagios ldap-group based front end login permission issues

  - by Eleven-Two

  I want to grant users access to the nagios 3 core frontend by using an active directory group ("NagiosWebfrontend" in the code below). The login works fine like this: AuthType Basic AuthName "Nagios Access" AuthBasicProvider ldap AuthzLDAPAuthoritative on AuthLDAPURL "ldap://ip-address:389/OU=user-ou,DC=domain,DC=tld?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN CN=LDAP-USER,OU=some-ou,DC=domain,DC=tld AuthLDAPBindPassword the_pass Require ldap-group CN=NagiosWebfrontend,OU=some-ou,DC=domain,DC=tld Unfortunately, every nagios page just shows "It appears as though you do not have permission to view information for any of the services you requested...". I got the hint, that I am missing a contact in nagios configuration which is equal to my login, but creating one with the same name as the domain user had no effect on this issue. However, it would be great to find a solution without manually editing nagios.conf for every new user, so the admins could grant access to nagios by just putting the user to "NagiosWebfrontend" group. What would be the best way to solve it?

  Read the article

• Restrict access to SSH for one specific user

  - by j0nes

  I am looking for a way to secure my servers with the following setup: I have a server where I can log in via SSH. The main account there (named "foo") is secured by a keybased login with password. I have another user account (named "bar") that I use to log in via cronjobs running on other servers - this one also has keybased login, but without password. Now I want to limit access to this machine for the "bar" account. The account should only be accessible via known IPs. However, the "foo" account should not be affected by this, this one should basically be accessible from any IP. How can I manage this? Or is there a simpler solution to everything?

  Read the article

• High Lock Wait ratio in MySQL

  - by FunkyChicken

  on my site I log every pageview (date,ip,referrer,page,etc) in a simple mysql table. This table gets very little selects (3 per minute), but a lot of inserts. (about 100 per second) Today I changed this table from an InnoDB table to a MEMORY table, this made sense to me to prevent unnecessary hard disk IO. I also prune this table once per minute, to make sure it never get's too big. -- Performance wise, things are running fine. But I noticed that while running tuning-primer, that my Current Lock Wait ratio is quite high. Current Lock Wait ratio = 1 : 561 My question: Should I worry about this Lock Wait Ratio? And is there something I can change in my my.cnf to improve things so that the lock wait ratio isn't so high?

  Read the article

• how to debug mysql has gone?

  - by fefe

  I have a virtual machine(Ubuntu 12.04, MySQL 5.5) running under VMware and is dedicated to host a mysql server. I connect to this server on internal IP. I'm trying to find out why I get mysql server has gone error. One my windows machines apache it stops because of this issue. I have been trying to fine tune my mysql my.cnf with the following parameters but did not bring the desired result. # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 0.0.0.0 # # * Fine Tuning # wait_timeout = 180 key_buffer = 384M max_allowed_packet = 64M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 500 table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M how to debug this issue what is missing from configuration to avoid this error?

  Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >