Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 404/1051 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

  • Running Flash on a headless Solaris box

    - by Marty Pitt
    Our build server is a Solaris box, and I'm trying to run a suite of FlexUnit tests as part of the automated build process. This works by compiling a swf movie with a suite of automated unit tests. The build script launches this movie, which automatically begins running the tests. Results of each test are sent back to the launching script across a port, and written out to a local xml file. Once the tests are completed, the movie closes down, and the build script interrogates the results to see if all the tests passed. The FlexUnit wiki provides information about how to to acheive this on a Unix server, by using Xvnc to provide a virtual space for the flash movie to run its tests in. I've provided this information through to our sys admin team, (along with the link to the article), and I've been told that because this is a Solaris box, we can't use that approach - Xvnc isn't supported on Solaris. Unfortunately, I know very little about servers, *nix vs Solaris, or Xvnc. Can someone please provide some advice about how we can achieve the same outcome on a Solaris box?

    Read the article

  • Removing partition to install OS?

    - by Shane
    So i have a computer that has 2 hard drives and i installed Ubuntu server on it. I used LVM to connect the two. So i tried to put windows back on it but it failed because it said it couldn't position the drive and then when i booted again the OS couldn't be found. So i booted it with the Ubuntu setup disc but now when it goes to partition it says that the position can not be modified because its already in use. I am asking if there is a way i can just remove everything and start fresh?

    Read the article

  • shinken/nagios discriminative between warning alert and critical alert

    - by SWdream
    i using shinken for my monitoring system. Now, i have a problem when i configure shinken notification. My purpose is to discriminative between notification for warning state and critical state of check service: with warning state: + time to send alert from 8h = 18 h everyday, via email and sms + notification_interval is 60 minutes (Re-notify about service problems every hour) with critical state: + time to send alert : all time (24 x 7), via email and sms + notification_interval is 30 minutes Please show me how to solve my problem! I have tried the following: i configured: + contact templates: define contact{ name warning-contact ; The name of this contact template register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE! host_notifications_enabled 1 define contact{ service_notifications_enabled 1 email shinken@localhost can_submit_commands 1 notificationways email_warning, sms_warning } define contact{ name critical-contact ; The name of this contact template register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE! host_notifications_enabled 1 service_notifications_enabled 1 email shinken@localhost can_submit_commands 1 notificationways email_critical, sms_critical } + time poriod templates: define timeperiod{ timeperiod_name warning alias Normal Work Hours monday 08:00-18:00 tuesday 08:00-18:00 wednesday 08:00-18:00 thursday 08:00-18:00 friday 08:00-18:00 saturday 08:00-18:00 sunday 08:00-18:00 #exclude 24x7 } define timeperiod{ timeperiod_name 24x7 alias 24_Hours_A_Day,_7_Days_A_Week sunday 00:00-24:00 monday 00:00-24:00 tuesday 00:00-24:00 wednesday 00:00-24:00 thursday 00:00-24:00 friday 00:00-24:00 saturday 00:00-24:00 #exclude workhours } + notification way templates: define notificationway{ notificationway_name email_warning service_notification_period warning host_notification_period warning service_notification_options w host_notification_options d,u,r,f,s notification_interval 60 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-email ; send service notifications via email host_notification_commands notify-host-by-email ; send host notifications via email } define notificationway{ notificationway_name email_critical service_notification_period 24x7 host_notification_period 24x7 service_notification_options c,r host_notification_options d,u,r,f,s notification_interval 30 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-email ; send service notifications via email host_notification_commands notify-host-by-email ; send host notifications via email } define notificationway{ notificationway_name sms_warning service_notification_period warning host_notification_period warning service_notification_options w host_notification_options d,u,r,f,s notification_interval 60 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-sms ; send service notifications via sms host_notification_commands notify-host-by-sms ; send host notifications via sms } define notificationway{ notificationway_name sms_critical service_notification_period 24x7 host_notification_period 24x7 service_notification_options c,r host_notification_options d,u,r,f,s notification_interval 30 ; Resend notifications every 30 minutes service_notification_commands notify-service-by-sms ; send service notifications via sms host_notification_commands notify-host-by-sms ; send host notifications via sms } + my contacts define contact{ use warning-contact contact_name thanhwarn email xxxx pager xxxx ; contact phone number } define contact{ use critical-contact contact_name thanhcritical email xxxxx pager 01689xxxx ; contact phone number } + and define service: define service{ use generic-service service_description check_ram host_name graphite contacts thanhcritical, thanhwarn check_command check_nrpe!check_ram } but my shinken system don't send alert. i don't understand this. please show me where I went wrong! thanks all!

    Read the article

  • Lesser known Ubuntu desktop applications

    - by becomingGuru
    So, this Ubuntu software center comes with 100s of applications of all types. In this version they have disabled rating, making it hard to find how good it is. I found gnome-shell today, that seemed awesome. There are other ones, less well known, For eg, Abiword is far better than Open Office Org Word processor in many ways. (Altho' I dont like word processors themselves.) What are the other less well known applications that you use and like. One application per answer.

    Read the article

  • Logfiles filling with iptables logging

    - by Peter I
    OS: Debian 6 Server Version I have different logfiles which are filling up: user@server:/var/log$ ls -lahS | head total 427G -rw-r--r-- 1 root root 267G Nov 2 17:29 bandwidth -rw-r----- 1 root adm 44G Nov 2 17:29 kern.log -rw-r----- 1 root adm 27G Nov 2 17:29 debug -rw-r----- 1 root adm 23G Oct 27 06:33 kern.log.1 -rw-r----- 1 root adm 17G Nov 2 17:29 messages -rw-r----- 1 root adm 14G Oct 27 06:33 debug.1 -rw-r----- 1 root adm 12G Nov 2 17:29 syslog -rw-r----- 1 root adm 12G Nov 1 06:26 syslog.1 -rw-r----- 1 root adm 9.0G Oct 27 06:33 messages.1 So I looked up the file /etc/iptables.up.rules which had those lines in it: -A FORWARD -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A FORWARD -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: -A OUTPUT -o eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_OUT: -A INPUT -i eth0 -j LOG --log-level 7 --log-prefix BANDWIDTH_IN: So deleting those lines will solve my problem. But how would I edit those lines without losing their functionality?

    Read the article

  • debian 6 losing a large amount of packets

    - by Sc0rian
    I have a rather strange problem. We covered all the obvious hardware related issues (different nic, eth cable and switch) however I cannot seem to stop eth dropping packets. I have 4 servers all exactly the same. driver: e1000e version: 1.2.20-k2 firmware-version: 1.8-0 bus-info: 0000:06:00.0 They are all running the latest kernel(2.6.32-5-amd64). However they do this: RX packets:17073870634 errors:0 dropped:14147208 overruns:0 frame:0 another server: eth0 Link encap:Ethernet HWaddr e0:69:95:05:2f:cb inet addr:10.10.10.86 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5455209277 errors:0 dropped:375445 overruns:0 frame:0 TX packets:3666134366 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6688414486673 (6.0 TiB) TX bytes:1611812171539 (1.4 TiB) Interrupt:20 Memory:d0600000-d0620000 eth1 Link encap:Ethernet HWaddr 00:1b:21:b7:7a:ce inet addr:10.10.0.86 Bcast:10.10.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15473695728 errors:0 dropped:5808325 overruns:0 frame:0 TX packets:20112364421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9192378766434 (8.3 TiB) TX bytes:20216368266761 (18.3 TiB) Interrupt:17 Memory:d0280000-d02a0000 A massive amount of dropped packets. I have tried to load on the latest driver, 1.9.5. This did nothing. I'm not sure what else to do.

    Read the article

  • Conferences to go to 2011 Edition

    - by Zypher
    It's that time of year to start thinking about what conferences we want to beg,plead,borrow and steal to get to go to this year. We all like a good conference, but are generally limited in the funds available to go to them - if we are provided any - so we need to be at least a little picky. What are the conferences that you are really excited about this year, and what tracks do you think will be the most beneficial to a sysadmin?

    Read the article

  • a load balancing scenario using HAProxy and keepalived shows no performance advantage

    - by chakoshi
    Hi, I am trying to setup a load balanced web server scenario, using two HAproxy load balancers and two debian web servers following this guide http://www.howtoforge.com/setting-up-a-high-availability-load-balancer-with-haproxy-keepalived-on-debian-lenny. the setup is working but the results of simple performance benchmarking is not what I expected. I tried apache benchmark tool to send lots of requests to servers (one time directly testing one of the web servers and the other time testing through the load balancer) using the command "ab -n 1000000 -c 500 http://IP/index.html", but the test results shows better performance for the single server without load balancer. can any one tell me if I'm going wrong on some thing?

    Read the article

  • php startup error Invalid library (maybe not a PHP library) 'pcntl.so'

    - by And-y
    After searching for hours to solve my problem and found nothing helpful I ask my first question here. I want to compile and install php 5.3.17 cli with pcntl extension enabled on a Debian server. The installation was successfull but when I start php cli, the following error is displayed: PHP Warning: PHP Startup: Invalid library (maybe not a PHP library) 'pcntl.so' in Unknown\ on line 0 The following configure is used: './configure' '--prefix=/usr/share' '--datadir=/usr/share/php' '--bindir=/usr/bin' '--libdir=/usr/share' '--includedir=/usr/include' '--with-config-file-path=/etc/php5/cli' '--disable-cgi' '--enable-bcmath' '-- enable-inline-optimization' '--enable-mbstring' '--enable-mbregex' '--enable-pcntl' '--enable-sigchild' '--enable-shmop' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--with-mysql' '--with-imap' '--with-imap-ssl' '--with-kerberos' In the php.ini following options are set: extension_dir=/usr/lib/php5/20090626/ extension=pcntl.so I hope someone can help me.

    Read the article

  • tmpreaper, --protect and a non-root user

    - by nsg
    Hi, I'm a little confused. I have a download directory that I want to remove all files older then 30 days with tmpreaper. Just one problem, the directory in question is a separate partition with a lost+found directory, of course I need to keep it so I added --protect 'lost+found', the problem is that tmpreaper outputs: error: chdir() to directory 'lost+found' (inode 11) failed: Permission denied (PID 30604) Back from recursing down `lost+found'. Entry matching `--protect' pattern skipped. `lost+found' I have tried with other pattern like lost* and so on... I'm running tmpreaper as a non-root user because there is no reason for superuser privileges because I own all files (except lost+found). Are I'm forced to run tmpreaper as root? Or are my shell-skills not as good as I thought? I guess the problem is: tmpreaper will chdir(2) into each of the directories you've specified for cleanup, and check for files matching the <shell_pattern> there. It then builds a list of them, and uses that to protect them from removal. Any thought and/or advice? Edit: The command I'm trying to run is something like $ /usr/sbin/tmpreaper -t --protect 'lost+found' 30d /mydir 1> /dev/null error: chdir() to directory `lost+found' (inode 11) failed: Permission denied Edit 2: I read the source code for tmpreaper-1.6.13 and found this if (safe_chdir (dirname)) exit(1); and if (chdir (dirname)) { message (LOG_ERROR, "chdir() to directory `%s' (inode %lu) failed: %s\n", dirname, (u_long) sb1.st_ino, strerror (errno)); return 1; } So it seems tmpreaper needs to be able to chdir in to all directories, ignored or not. I see two options left Run tmpreaper as root Move the download directory Find a alternative tool (tmpwatch?) I will give it some more research before i make a choice.

    Read the article

  • Reconstructing the disk order in RAID 6 with 7 disks

    - by rkotulla
    a little background to this question first: I am running a RAID-6 within a QNAP TS869L external RAID/NAS system. I started with 5 disks of 3 TB each back in the day, and later added another 2 disks of 3TB to the RAID. The QNAP internals handled the growing and re-syncing etc, and everything seemd to be perfectly fine. About 2 weeks ago, I had one of the disks (disk #5, disk #2 has gone bad in the mean time) fail, and somehow (I have no idea why), also disks 1 and 2 got kicked out of the array. I replaced disk #5, but the RAID didn't start working again. After some calls to QNAP technical support, they re-created the array (using mdadm --create --force --assume-clean ...), but the resulting array couldn't find a filesystem, and I was kindly referred to contact a data recovery company that I can't afford. After some digging through old log files, resetting the disk to factory default, etc, I found a few errors that were made during this re-create - I wish I still had some of the original metadata, but unfortunately i don't (I definitely learned that lesson). I'm currently at the point where I know the correct chunk-size (64K), metadata-version (1.0; factory default was 0.9, but from what I read 0.9 doesn't handle disks over 2 TB, mine are 3 TB), and I now find the ext4 filesystem that should be on the disks. Only variable left to determine is the right disk order! I started using the description found in answer #4 of "Recover RAID 5 data after created new array instead of re-using" but am a little confused on what the order should be for a proper RAID-6. RAID-5 is pretty well documented in a number of places, but RAID-6 much less so. Also, does the layout, i.e. distribution of parity and data chunks across the disks, change after the growing of the array from 5 to 7 disks, or does the re-sync re-organize them in such a way a native 7-disk RAID-6 would have been? Thanks some more mdadm output that might be helpful: mdadm version: [~] # mdadm --version mdadm - v2.6.3 - 20th August 2007 mdadm details from one of the disks in the array: [~] # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 1.0 Feature Map : 0x0 Array UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Name : 0 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Raid Devices : 7 Used Dev Size : 5857395112 (2793.02 GiB 2998.99 GB) Array Size : 29286975360 (13965.12 GiB 14994.93 GB) Used Size : 5857395072 (2793.02 GiB 2998.99 GB) Super Offset : 5857395368 sectors State : clean Device UUID : 7c572d8f:20c12727:7e88c888:c2c357af Update Time : Tue Jun 10 13:01:06 2014 Checksum : d275c82d - correct Events : 7036 Chunk Size : 64K Array Slot : 0 (0, 1, failed, 3, failed, 5, 6) Array State : Uu_u_uu 2 failed mdadm details for the array in the current disk-order (based on my best guess reconstructed from old log-files) [~] # mdadm --detail /dev/md0 /dev/md0: Version : 01.00.03 Creation Time : Tue Jun 10 10:27:58 2014 Raid Level : raid6 Array Size : 14643487680 (13965.12 GiB 14994.93 GB) Used Dev Size : 2928697536 (2793.02 GiB 2998.99 GB) Raid Devices : 7 Total Devices : 5 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Jun 10 13:01:06 2014 State : clean, degraded Active Devices : 5 Working Devices : 5 Failed Devices : 0 Spare Devices : 0 Chunk Size : 64K Name : 0 UUID : 1c1614a5:e3be2fbb:4af01271:947fe3aa Events : 7036 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 0 0 2 removed 3 8 51 3 active sync /dev/sdd3 4 0 0 4 removed 5 8 99 5 active sync /dev/sdg3 6 8 83 6 active sync /dev/sdf3 output from /proc/mdstat (md8, md9, and md13 are internally used RAIDs holding swap, etc; the one I'm after is md0) [~] # more /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md0 : active raid6 sdf3[6] sdg3[5] sdd3[3] sdb3[1] sda3[0] 14643487680 blocks super 1.0 level 6, 64k chunk, algorithm 2 [7/5] [UU_U_UU] md8 : active raid1 sdg2[2](S) sdf2[3](S) sdd2[4](S) sdc2[5](S) sdb2[6](S) sda2[1] sde2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdg4[3] sdf4[4] sde4[5] sdd4[6] sdc4[2] sdb4[1] sda4[0] 458880 blocks [8/7] [UUUUUUU_] bitmap: 21/57 pages [84KB], 4KB chunk md9 : active raid1 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sda1[0] sdb1[1] 530048 blocks [8/7] [UUUUUUU_] bitmap: 37/65 pages [148KB], 4KB chunk unused devices: <none>

    Read the article

  • Move Ubuntu to another drive

    - by Ben Dilts
    I have a laptop with an 80GB SSD and 500GB HDD. I currently have Windows installed on the SSD, and a 400GB data partition for Windows on the HDD. I set aside 100GB on the HDD to try out Ubuntu, and I'd like to make it my primary OS and switch it over to the (much) faster SSD. How could I go about getting my Ubuntu setup moved over to the SSD? I have a 120GB USB hard drive I can use if necessary for getting through it.

    Read the article

  • Fedora 15: em1 recently dissapeared and hostapd no longer serves internet to wirelessly connected devices

    - by Daniel K
    I have a laptop running hostapd, phpd, and mysql. This laptop uses an Ethernet connection to connect to the internet and acts as a wireless access point for my workplace's wifi devices. After installing some software and reconnecting my Ethernet elsewhere, my "em1" device is no longer present and wirelessly connected devices can no longer reach the internet. The software I recently installed is: pptp, pptpd, and updated some fedora libraries. I have also recently moved my desk and laptop to another location and thus had to reconnect the Ethernet elsewhere. Wifi devices no longer have access to the internet. Wirelessly connected devices are able to successfully log into the laptop, showing full strength, correct SSID, and uses the proper password. However, when I tried to connect to a site like google, the request times out. The device "em1" also no longer appears on my machine. Running: # ifup em1 will give me the following output: ERROR : [/etc/sysconfig/network-scripts/ifup-eth] Device em1 does not seem to be present, delaying initialization. And running: # dhclient em1 has the following output: Cannot find device "em1" When I run # dmesg|grep renamed, I get the following: renamed network interface eth0 to p4p1. I've tried to connect to the internet through p4p1 directly from the laptop and was successful. However, my wireless devices connected to my laptop are not able to connect to the internet. I have uninstalled pptp and pptpd using # yum erase ... but the problem still persists. To install pptp I used: # yum install pptp To install pptpd I did the following: # rpm -Uvh http://poptop.sourceforge.net/yum/stable/fc15/pptp-release-current.noarch.rpm # yum install pptpd To update my fedora libraries I used: # yum check-update # yum update EDIT: Running # route produces the following results: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.11.200.1 0.0.0.0 UG 0 0 0 p4p1 10.11.200.0 * 255.255.252.0 U 0 0 0 p4p1 172.16.100.0 * 255.255.255.0 U 0 0 0 wlan0

    Read the article

  • "iostat" command different in two equal machines

    - by Oz.
    We have several machines on Amazon (ec2) of the type c1.xlarge with 8 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are - 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st. Mem is about 1.5GB free. Any idea what could it be, or where else can we check? iostat command on the proper machine: avg-cpu: %user %nice %system %iowait %steal %idle 8.97 0.03 4.46 0.19 0.14 86.23 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn xvdap1 1.60 0.69 55.38 587620 47254184 xvdfp2 2.64 1.10 61.04 934786 52091056 xvdfp4 0.86 0.19 41.72 163866 35601920 xvdfp1 4.37 36.59 73.89 31220810 63051504 xvdfp3 8.03 7.08 94.63 6045402 80749184 iostat command on problematic machine: avg-cpu: %user %nice %system %iowait %steal %idle 9.29 0.04 5.55 0.26 0.11 84.74 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn xvdap1 2.13 3.34 68.85 246244 5077888 xvdfp1 7.60 74.31 104.88 5480362 7734840 xvdfp3 13.22 73.67 125.00 5433386 9218600 xvdfp4 1.11 0.76 65.08 55762 4799248 xvdfp2 4.16 3.31 99.17 243818 7313264 Many thanks for the help.

    Read the article

  • openvpn problem

    - by Jared Voronik
    I have a problem with openvpn. I have already setup openvpn sucessfully on some other servers in the past (basic configuration, nothing special). On this server, I used the same config file, but for setting up nat iptables -t nat -A POSTROUTING -s 10.4.0.0/24 -o eth0 -j MASQUERADE doesn't work. It gives error: iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. How do I fix this error? Also, if I can't fix this error, can I do bridging instead of routing? I have only 1 interface, and I can connect to remote server only via ssh (and need to avoid reboots if at all possible) so if briding means a whole ethernet card has to be devoted to the openvpn (and no other servers) then briding is out, otherwise I can use briding. Do you know of a simple, step by step guide to configure openvpn briding (just simple openvpn server and clients that can access internet through vpn server, nothing fancy)?

    Read the article

  • How to remove Games on Fedora 14?

    - by user44212
    While installing the fedora desktop I had unchecked the Games and Entertainment section but I can still see the same Games options available in the menu. I tried checking the same in the Add/Remove Programs but I was not able to get the option for uninstalling the same. Games which are present are: AisleRiot Solitaire, lagno, Mines and Sudoku I would like to delete the games options available. Can someone help me doing the same?

    Read the article

  • *nix: Run as different user GUI

    - by singpolyma
    I want to run an application using only GUI as a different user. Not root. I want the user to be presented with a dropdown of system users, select one, enter the password, and the app gets run as that user. Like gksudo but user to run as specified in GUI and not as switch. Does such an app exist?

    Read the article

  • Downloading a large site with wget

    - by Evan Gill
    Hi, I'm trying to mirror a very large site but wget never seems to finish properly. I am using the command: wget -r -l inf -nc -w 0.5 {the-site} I have downloaded a good portion of the site, but not the whole thing. The content does not change fast enough to bother using time-stamping. After running overnight, this message appears: File `{filename}.html' already there; not retrieving. File `{filename}.html' already there; not retrieving. File `{filename}.html' already there; not retrieving. File `{filename}.html' already there; not retrieving. Killed does anyone know what is happening and how I can fix it?

    Read the article

  • What useful things can one add to one's .bashrc?

    - by gyaresu
    Is there anything that you can't live without and will make my life SO much easier? Here are some that I use ('diskspace' & 'folders' are particularly handy). # some more ls aliases alias ll='ls -alh' alias la='ls -A' alias l='ls -CFlh' alias woo='fortune' alias lsd="ls -alF | grep /$" # This is GOLD for finding out what is taking so much space on your drives! alias diskspace="du -S | sort -n -r |more" # Command line mplayer movie watching for the win. alias mp="mplayer -fs" # Show me the size (sorted) of only the folders in this directory alias folders="find . -maxdepth 1 -type d -print | xargs du -sk | sort -rn" # This will keep you sane when you're about to smash the keyboard again. alias frak="fortune" # This is where you put your hand rolled scripts (remember to chmod them) PATH="$HOME/bin:$PATH"

    Read the article

  • Trying to make changes to the size of the events buffer in prelude-ids auditd plugin

    - by tharris
    I am running systems using the prelude-ids plugin for auditd. When the manager is up every thing works fine however I have a requirement that when the clients can't talk to the manager they should store no more than 250MB of messages, and when they hit that point they should start deleting the oldest events. All I can find is that audispd can be set to an overflow action of ignore,syslog,suspend,single, and halt none of which meet my requirement, and several of which I really cannot use. Does anyone know a way to do this? I know the events get stored in /var/spool/prelude/auditd/global, but I can't find anything about configuring how things are stored here. There are usually several files in the global directory but only 2 of them ever go above 0 in size, data0 and data0.journal.

    Read the article

  • What is wrong with my expect script?

    - by Bryan
    I'm trying to learn how to use the expect command, to help me automate deployment of some software via shell scripts, and figured I start with something simple to get me started. I've created a file in my home dir called 'foo' using: touch foo And I've created the following script saved as test.exp #!/usr/bin/expect spawn rm -i foo expect "rm: remove regular empty file `foo'?" send "y\r" When I run the script using ./test.exp, it spawns the rm command, but it doesn't appear to send the Y and carriage return. I know I don't have a typo in the expect string, as I've used copy and paste to put in the script. What am I doing wrong?

    Read the article

  • Configure bash_profile for one single terminal emulator

    - by Hugo
    I'm using a new terminal emulator. Terminology is the E17 default terminal, and it have a great command, $ tyls with is a "graphical" $ ls I want to create an alias just for this terminal, because the command "tyls" don't make sense to konsole, rxvt or other terminals. I'm thinking in some kind of "if" in ~/.bash_profile to test if I'm on terminology and then run the following command: alias ls="tyls" But how can I test if I'm in terminology but not xterm? Can someone help me? Thanks!

    Read the article

  • kill a hung mount process

    - by John P
    I have a virtual machine drive that ran out of space, so I shutdown the VM, extended the volume using lvextend. After resizing the partition (ext3), I ran e2fsck on it, and it found and corrected errors. Unfortunately, when I ran efsck one more time, there were more errors that had to be fixed. I went through 3 rounds of e2fsck before I decided to try mounting it to clean up some space manually. I tried mounting it, but the mount process hung. I tried to "kill -9" the mount process, but that did not kill it. I killed the parent process, but that did not kill it either. Any ideas on how to kill a rogue mount process? Some evidence: ps -l 13292 F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD 4 R 0 13292 1 99 85 0 - 17964 - ? 11:27 mount /dev/mapper/xen7-123p3 /tmp/p3/ lsof -p 13292 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mount 13292 root cwd DIR 9,2 4096 25264129 /root mount 13292 root rtd DIR 9,2 4096 2 / mount 13292 root txt REG 9,2 61656 2916434 /bin/mount mount 13292 root mem REG 9,2 144776 31457282 /lib64/ld-2.5.so mount 13292 root mem REG 9,2 1718232 31457284 /lib64/libc-2.5.so mount 13292 root mem REG 9,2 23360 31457291 /lib64/libdl-2.5.so mount 13292 root mem REG 9,2 43808 31457783 /lib64/libblkid.so.1.0 mount 13292 root mem REG 9,2 247496 31457331 /lib64/libsepol.so.1 mount 13292 root mem REG 9,2 95464 31457337 /lib64/libselinux.so.1 mount 13292 root mem REG 9,2 154640 31457491 /lib64/libdevmapper.so.1.02 mount 13292 root mem REG 9,2 17936 31457472 /lib64/libuuid.so.1.2 mount 13292 root mem REG 9,2 56438208 12684878 /usr/lib/locale/locale-archive mount 13292 root 0u CHR 136,11 0t0 13 /dev/pts/11 (deleted) mount 13292 root 1u CHR 136,11 0t0 13 /dev/pts/11 (deleted) mount 13292 root 2u CHR 136,11 0t0 13 /dev/pts/11 (deleted) umount -f /tmp/p3/ umount2: Invalid argument umount: /tmp/p3/: not mounted

    Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >