Search Results

Search found 24646 results on 986 pages for 'linux vserver'.

Page 404/986 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• having 2 ip's on a debian 7 box

  - by David

  I just installed Debian Wheezy on my homeserver. I want to assign 2 ip's to it on the same network interface, 1 static ip (eth0) and 1 dynamic ip (eth0:1). I know it doesn't make much sense but I need it to test something. I edited my /etc/network/interfaces to be like this: auto lo eth0 eth0:1 iface lo inet loopback iface eth0 inet static address 192.168.178.240 network 192.168.178.0 netmask 255.255.255.0 broadcast 192.168.178.255 gateway 192.168.178.1 iface eth0:1 inet dhcp when I bring up eth0:1 (ifup eth0:1) I get the following error (eth0 works fine) Bind socket to interface: No such device Failed to bring up eth0:1. is it even possible to have a dynamic and static ip on the same network adapter?

  Read the article

• Is Joerg Schilling's "sdd" a full replacement for "dd"

  - by fishtoprecords

  I'm trying to use 'sdd' on my Debian system, and can't get one set of options to work. They do work in 'dd' so I am wondering if I am specifying them incorrectly, or if sdd didn't implement them, or something else. What I want to do is sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 conv=sync,noerror if I leave out the "conv=..." option, it works, or at least starts copying data. sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 Can you shed a bit of light?

  Read the article

• Sendmail is not ignoring MX lookups

  - by daniel

  Hello, I recently learned of the joys of square brackets with SMART_HOST to have sendmail ignore MX lookups. I need this functionality, however, I can't seem to make it persistant. Sending mail with -Am works, however, -bm does not. In the -Am case, the correct mail server is used. In the -bm case, an MX lookup is still being performed. Is there a way to disable MX lookups (or some working alternative)? Thanks

  Read the article

• How can a driver change the kernel page table?

  - by Naruto

  I am encountering an issue with kernel memory. When my driver finishes running, the other processes in kernel fail to run, for example, I run ls, the command crashes the kernel with error "Corrupted page table" at a specified address. I do not know whether the page table of my driver relates to the page table of other process. How can my driver changes the page table of the other processes? And how the driver of a process relates to the kernel page table? As I know when the driver runs, it will be switched to kernel context. Kernel has its own page table and the driver has it own one. What is the relation among the kernel page table, the page table of my driver and the page table of the other processes when it runs in kernel context?

  Read the article

• Daemons did not start automatically ubuntu 10.04

  - by Anton Prokofiev

  Hello, All! I have a strange behavior on Ubuntu 10.4: few daemons (apache2 and postgresql (8.4SS from enterpriseDB) did not start automatically. Funny things that time-to-to they do. (If I just restart my computer everything looks ok, but if I turn it off for the night, nothing work..., so I have to start them manually) I've googled this problem a little bit, but the only answer I have found was to run: sudo update-rc.d apache2 defaults I've called it but the answer was: System start/stop links for /etc/init.d/apache2 already exist. Any Ideas?

  Read the article

• After installing Ubuntu how do I get rid of unity and go back to gnome?

  - by aseq

  After I have installed the newest Ubuntu LTS release (12.04, still in beta though) I am greeted with an unfamiliar and difficult to use desktop environment. I believe it is called unity. However I have used gnome for a decade and a half and I would not like to move to this new and (for me) unusable desktop environment. What is a quick and easy way to remove (most) of unity and bring back gnome, as well as configure my display manager to load gnome by default with the environment as close as possible to the way it was before?

  Read the article

• How to set up virtual users in vsftpd?

  - by ares94

  I've read this tutorial: http://howto.gumph.org/content/setup-virtual-users-and-directories-in-vsftpd/ My configuration is as follow: ---vsftpd.conf--- listen=YES anonymous_enable=NO local_enable=YES virtual_use_local_privs=YES write_enable=YES connect_from_port_20=YES pam_service_name=vsftpd guest_enable=YES user_sub_token=$USER local_root=/var/www/sites/$USER chroot_local_user=YES hide_ids=YES ---/etc/pam.d/vsftpd--- auth required pam_pwdfile.so pwdfile /etc/vsftpd/passwd account required pam_permit.so I created file /etc/vsftpd/passwd and added users using htaccess. I tried to login but it didn't work: ftp 127.0.0.1 Connected to 127.0.0.1 (127.0.0.1). 220 vsFTPd 2.3.5+ (ext.1) ready... Name (127.0.0.1:root): user1 331 Please specify the password. Password: 530 Permission denied. Login failed. Everything seems fine accept the permission denied thing. How can I fix this?

  Read the article

• circumstances where software change leads to device damage

  - by nerorevenge

  Recently I changed a friend's OS from a really virus filled windows 7 to Ubuntu ..but kept changing os's because lsusb wouldn't detect the camera.But after coming back to windows, the camera wasn't detected, though I must point out the device driver for the camera was never found. The Sony 'technician' told me that that since the dev-manager of windows 7 couldn't detect the camera , irregardless of whether the device driver was installed, the software change must have damaged the hardware. I was wondering if there is any truth to it.

  Read the article

• How can I run a job when the server load is low?

  - by jberryman

  I have a command that runs a disk snapshot (on EC2, freezing an XFS disk and running an EBS snapshot command), which is set to run on a regular schedule as a cron job. Ideally I would like to be able to have the command delayed for a period of time if the disk is being used heavily at the moment the task is scheduled to run. I'm afraid that using nice/ionice might not have the proper effect, as I would like the script to run with high priority while it is running (i.e. wait for a good time, then finish fast). Thanks.

  Read the article

• Recommendations for a PDF viewer with "web browser"-like navigation.

  - by Tshepang

  Am looking for a PDF reader that can navigate PDF files like a web browser (IE, when I click a link that takes me to another part of the doc, I should be able to go back by pressing Ctrl+left arrow). I am using Debian.

  Read the article

• Entire filesystem restore from rdiff-backup snapshot

  - by atmosx

  I'm trying to make a complete system restore from an rdiff-backup. The cli for backing was: rdiff-backup --exclude-special-files --exclude /tmp --exclude /mnt --exclude /proc --exclude /sys / /mnt/backup/ebox/ I created a new partition mounted the partition at /mnt/gentoo and did: rdiff-backup -r /mnt/vol2 /mnt/gentoo However when I try to chroot to this system (following gentoo's manual, which means mounting /dev/ and /proc) I get the following error: chroot: failed to run command/bin/bash': No such file or directory` All this takes place on a Parallels (virtual machine) Debian installation. Any ideas on how to proceed in order to fully restore the system? Best Regards ps. /mnt/gentoo/bin/bash works fine if I execute it. All files and permissions are in place rdiff-backup seems to work just fine. However the system cannot neither boot (exits with kernel panic - cannot find init) or be chrooted.

  Read the article

• Iptables ignoring a rule in the config file

  - by Overdeath

  I see lot of established connections to my apache server from the ip 188.241.114.22 which eventually causes apache to hang . After I restart the service everything works fine. I tried adding a rule in iptables -A INPUT -s 188.241.114.22 -j DROP but despite that I keep seeing connections from that IP. I'm using centOS and i'm adding the rule like thie: iptables -A INPUT -s 188.241.114.22 -j DROP Right afther that I save it using: service iptables save Here is the output of iptables -L -v ` Chain INPUT (policy ACCEPT 120K packets, 16M bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any c-98-210-5-174.hsd1.ca.comcast.net anywhere 0 0 DROP all -- any any c-98-201-5-174.hsd1.tx.comcast.net anywhere 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any www.dabacus2.com anywhere 0 0 DROP all -- any any 116.255.163.100 anywhere 0 0 DROP all -- any any 94.23.119.11 anywhere 0 0 DROP all -- any any 164.bajanet.mx anywhere 0 0 DROP all -- any any 173-203-71-136.static.cloud-ips.com anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any 74.122.177.12 anywhere 0 0 DROP all -- any any 58.83.227.150 anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 186K packets, 224M bytes) pkts bytes target prot opt in out source destination `

  Read the article

• IBM Server searching for secondary server

  - by user1241438

  I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

  Read the article

• Error handling pppd configuration?

  - by Sebastian

  I have a computer, running ubuntu, that I want to be connected to the network at all times. It has a GSM modem connected to it via USB. Is there some program available that monitors that the networking is working (by pinging some site(s)), and if not tries to fix the error by reseting the modem, reloading the USB drivers and perhaps by dropping the USB port's current (if possible) to force the modem to reset ?

  Read the article

• SQUID Transparent SSL proxy (no intercept)

  - by user974896

  I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

  Read the article

• Still no external sound after installing ubuntu 10.04

  - by Walter

  As suggested I upgraded. Same as before except now not even the speaker control in the application bar. Please help. Background: I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System Administration Hardware Drivers; the only driver listed is my graphics card. Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.

  Read the article

• Allowing access to MPD from local network

  - by August Karlstrom

  I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

  Read the article

• Kickstart Partitioning Configuration

  - by Flo

  I'be been trying to run a kickstart script with the following partition configuration: #Clear the masterboot record zerombr bootloader --location=mbr --driveorder=sda --append=" rhgb crashkernel=auto quiet" # Set up the partitions/logical volumes/logical groups clearpart --all part /boot --fstype=ext4 --asprimary --size=512 --ondisk=sda part swap --size=2048 --fstype=swap --ondisk=sda part pv.01 --fstype=ext4 --grow --size=200 --ondisk=sda part pv.02 --fstype=ext4 --grow --size=200 --ondisk=sdb volgroup VolGroup pv.01 pv.02 --pesize=32768 logvol /opt --fstype=ext4 --name=opt.fs --vgname=VolGroup --size=40000 logvol / --fstype=ext4 --name=root.fs --vgname=VolGroup --size=78000 I have two hard drives and it looks to me like its a really simple configuration. When I run the kickstart I keep getting all these errors that have to do with python files for configuring partitions. The only actual maybe useful piece of information is KeyError /dev/sda/ I tried a number of alterations of this configuration but nothing really worked. Any ideas?

  Read the article

• find kernel config option in menuconfig

  - by puchu

  I've upgraded my gentoo-sources today to 3.3.8, and now I am looking at diff between old kernel's defconfig and old kernel's .config: there are about 20 changes. I want to apply this changes manually to new kernel's menuconfig. Where can I find tool like: menuconfig-find -v 3.3.8-gentoo CONFIG_KVM_AMD >> Virtualization >> -> Kernel-based Virtual Machine (KVM) support >> -> KVM for AMD processors support

  Read the article

• DEBIAN repository signing: a step-by-step guide.

  - by jldupont

  I've got many DEBIAN repository for my projects (e.g. EPAPI, erlang-dbus etc.). It seems that now Synaptic wants those to be signed for the packages to appear by default. For the DEBIAN kung-fu masters out there, please provide me with a step-by-step guide to achieving this, please. I've googled a lot but I am still a bit confused on the subject. update: I use a Launchpad PPA now... saves me from all this trouble.

  Read the article

• installing software configure.in

  - by ant2009

  Hello, Fedora 12 2.6.32.9-70.fc12.i686 I have downloaded kdirstat from cvs. And I want to compile and install it. However, there is no configure script file. The only file I have is a configure.in.in. How can I create the configure script file? Many thanks for any advice,

  Read the article

• lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

  - by bpetit

  Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

  Read the article

• Changing path to basedir of mysql

  - by shantanuo

  When-ever I need to start mysql from command line, I need to cd to the base directory and then use mysql command as shown below: # cd /home/ec2-user/percona-5.5.30-tokudb-7.0.1-fedora-x86_64/ # ./bin/mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 mysql> How do I start mysql simply by typing "mysql" at command prompt? I tried to export the path but it did not work. export path=$PATH:/home/ec2-user/percona-5.5.30-tokudb-7.0.1-fedora-x86_64/bin/

  Read the article

• s3fs changing s3 permissions?

  - by magd1

  My developer believes that s3fs is changing my bucket's permissions. Is this possible? I want my bucket to be public, but it keeps reverting back to private. Here's my fstab. s3fs#production /mnt/production fuse use_cache=/tmp,use_rrs=1,allow_other,uid=1000,gid=1000 0 0 My developer mentioned the "-o default_acl (default="private")" option. The documentation refers to "canned acl", but I don't understand what these are.

  Read the article

• Messy Filesytem : Duplicate File Removal from the command line

  - by jrause

  In debian/ubuntu I want to a) create a list of all the files in one directory tree b) do the same for a second directory tree c) compare the two lists such that, only the file NAMES are compared (i.e. just comparing the "file.txt" part so that "/home/folder/file.txt" == "/home/secondfolder/folder/file.txt) d) output a list of all the duplicates can anyone please explain how to do this using scripting languages or regex or something?

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >