Search Results

Search found 12844 results on 514 pages for 'manual testing'.

Page 407/514 | < Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >

  • DRBD setup problem

    - by cuthieu
    I'm so new to DRBD, please help me fixing the problem below. Enclosed my drbd.conf. Many thanks [root@skonkwerks1 ~]# drbdadm create-md all open(/dev/hdb3) failed: No such file or directory Command 'drbdmeta /dev/drbd0 v08 /dev/hdb3 internal create-md' terminated with exit code 20 drbdsetup exited with code 20 [root@skonkwerks1 ~]# vi /etc/drbd.conf global { usage-count no; } resource repdata { protocol C; startup { wfc-timeout 0; degr-wfc-timeout 120; } disk { on-io-error detach; } # or panic # net { cram-hmac-alg "hdd1"; shared-secret "testing"; } syncer { rate 10M; } on skonkwerks1 { device /dev/drbd0; disk /dev/hdb1; address 172.29.156.1:7788; meta-disk internal; } on skonkwerks2 { device /dev/drbd0; disk /dev/hdb1; address 172.29.156.2:7788; meta-disk internal; } }

    Read the article

  • Sharepoint (WSS 3.0) on SBS 2008 broken.

    - by tcv
    I recently ran the Sharepoint Products and Technologies Wizard. I had hoped this would bring up Sharepoint and allow me to access it so I could begin to learn. But it's not working. Here is some data that I hope is relevant. I am doing all my testing on the SBS 2008 server itself. I changed the hostheader in IIS to reflect an external FQDN I plan to deploy. The SBS server is remote and there are no domain-connected workstations. If I browse "localhost" SSL, I can get to the site, albeit with a self-signed cert warning. If I attempt to connect via SSL using either the internal FQDN (.local), the External FQDN (.net) or any other permutation thereof, I am prompted for credentials three times but am not allowed access. My account is a domain admin. The site is inaccessible using port 80 whether using localhost, internal FQDN (.local), and external FQDN (.net) Right now, I suspect my problem is within IIS, but I don't know. My plan to publish the sharepoint site to the web so my partner and I can check documents in/out. Can someone help me get started in current direction?

    Read the article

  • Deleting certain files sits at "preparing to recycle" on Windows 7?

    - by Rachel
    We recently setup one of our users with a brand new Windows 7 computer, however she is unable to delete certain files. With some testing, I found I cannot move, rename, or view properties of these files either. When trying to delete the file, it just sits at the "Preparing to recycle" popup, however the "from" section says "Discovering items..." Clicking "More Details" on the popup shows me that it can't find the file name or where it's recycling from: Other notes... All the affected files are .pdf files that get created via a scanner. Other pdf files are fine. Opening the files works fine. I can open the file, Save As a new file, and delete the new one just fine Trying to delete the file via command prompt just sits there Rebooting the computer will let me manipulate the files like normal, however this user is responsible for scanning hundreds of documents a day and I'd rather not have to tell her to reboot her computer to delete files. The user is part of the administrator group on the computer The Owner of the affected files is the user attrib of files is just A

    Read the article

  • Registry remotley hacked win 7 need help tracking the perp

    - by user577229
    I was writing some .VBS code at thhe office that would allow certain file extensions to be downloaded without a warning dialog on a w7x32 system. The system I was writing this on is in a lab on a segmented subnet. All web access is via a proxy server. The only means of accessing my machine is via the internet or from within the labs MSFT AD domain. While writing and testing my code I found a message of sorts. Upon refresing the registry to verify my code changed a dword, instead the message HELLO was written and visible in regedit where the dword value wass called for. I took a screen shot and proceeded to edit my code. This same weird behavior occurred last time I was writing registry code except on another internal server. I understand that remote registry access exists for windows systems. I will block this immediately once I return to the office. What I want to know is, can I trace who made this connection? How would I do this? I suspect the cause of this is the cause of other "odd" behaviors I'm experiencing at work such as losing control of my input director master control for over an hour and unchanged code that all of a sudden fails for no logical region. These failures occur at funny times, whenver I'm about to give a demonstration of my test code. I know this sounds crazy however knowledge of the registry component makes this believable. Once the registry can be accessed, the entire system is compromised. Any help or sanity checking is appreciated.

    Read the article

  • Virtual Machine Network Architecture, Isolating Public and Private Networks

    - by Mark
    I'm looking for some insight into best practices for network traffic isolation within a virtual environment, specifically under VMWARE ESXi. Currently I have (in testing) 1 hardware server running ESXi but i expect to expand this to multiple pieces of hardware. The current setup is as follows: 1 pfsense VM, this VM accepts all outside (WAN/internet) traffic and performs firewall/port forwarding/NAT functionality. I have multiple public IP addresses sent to the this VM that are used for access to individual servers (via per incoming IP port forwarding rules). This VM is attached to the private (virtual) network that all other VMs are on. It also manages a VPN link into the private network with some access restrictions. This isn't the perimeter firewall but rather the firewall for this virtual pool only. I have 3 VMs that communicate with each other, as well as have some public access requirements: 1 LAMP server running an eCommerce site, public internet accessible 1 accounting server, access via windows server 2008 RDS services for remote access by users 1 inventory/warehouse management server, VPN to client terminals in warehouses These servers constantly talk with each other for data synchronization. Currently all the servers are on the same subnet/virtual network and connected to the internet through the pfsense VM. The pfsense firewall uses port forwarding and NAT to allow outside access to the servers for services and for server access to the internet. My main question is this: Is there a security benefit to adding a second virtual network adapter to each server and controlling traffic such that all server to server communication is on one separate virtual network, while any access to the outside world is routed through the other network adapter, through the firewall, and on the the internet. This is the type of architecture i would use if these were all physical servers, but i'm unsure if the networks being virtual changes the way i should approach locking down this system. Thank you for any thoughts or direction to any appropriate literature.

    Read the article

  • Does MySQL log successful or attempted queries?

    - by Nathan Long
    I'm trying to track down a hit-or-miss bug in a web application. Sometimes a request completes just fine; sometimes it hangs and never finishes. I see that Apache now has several requests listed on the server-status page as "sending reply," and that doesn't change. I'm testing on localhost, so there shouldn't ever be more than one. Out of curiosity, I set MySQL to log all queries and I'm tail -fing the log file. When things go OK, I see a pattern like this: 20 Connect root@localhost on dbname 20 Query (some query #1) 20 Query (some query #2) (etc) 20 Quit 21 Connect (etc) When it hangs, I see a pattern like this: 22 Connect root@localhost on dbname 22 Query (some query #1) //nothing happens, so I try the post again 23 Connect root@localhost on dbname 23 Query (some query #1) //nothing happens; try again 24 Connect (etc) Here's my question: is MySQL logging attempted queries, or successful queries? In other words, if the last line I see is query #1, does that imply that query #1 or query #2 is hanging? My guess is that the one I don't see is the problem, because the last one I see looks fine, but maybe the one I don't see is too screwed-up for MySQL to process. Thoughts?

    Read the article

  • .NET 2.0 Application now running slow on IIS 7.5

    - by Valien
    I recently moved (and still in testing) an application from a Windows 2003 Server (Physical box) running IIS 6.x to a Windows 2008 R2 Standard (VM) IIS 7.5 server. The application is a .NET framework 2.0 application and is running under a 2.0 App Pool. This site works great except for one thing: Takes forever to get a request back. I've been tracking it with Chrome Inspect Element and it queries the site and can take up to 45 seconds to answer. Now when it does the page(s) render instantly but it's that initial request that's killing it. I see no error logs or issues with the application or Windows Event Viewer or even IIS logs so not sure where to start looking next. Some new changes was that previously the app resided behind a Pix firewall and now is behind a larger network environment in a DMZ zone (and I believe NetScaler is also being used to manage the network). I do not have rights/abilities to look at the network itself but can contact the Data center folks to look deeper into this but I wanted to make sure it's not my application that might be causing the slowdown or IIS. In summary: .NET 2.0 application works great in IIS 6.x Application moved to an IIS 7.5 server and now slow on rendering but when it does render responds back with pages instantly. Edit for solution Found out that it was the SOAP calls that were slowing the site down. In the new datacenter my application cannot request SOAP calls and so they time out after 40-45 seconds or so. Now trying to find out if I can install a proxy server to redirect this...

    Read the article

  • Disadvantages of enabling 'Low Fragmentation Heap' LFH on Windows Server 2003?

    - by James Wiseman
    I've been investigating an issue with a production Classic ASP website running on IIS6 which seems indicative of memory fragmentation. One of the suggestions of how to ameliorate this came from Stackoverflow: How can I find why some classic asp pages randomly take a real long time to execute?. It suggested flipping a setting in the site's global.asa file to 'turn on' Low Fragmentation Heap (LFH). The following code (with a registered version of the accompanying DLL) did the trick. Set LFHObj=CreateObject("TURNONLFH.ObjTurnOnLFH") LFHObj.TurnOnLFH() application("TurnOnLFHResult")=CStr(LFHObj.TurnOnLFHResult) (Really the code isn't that important to the question). An author of a linked post reported a seemingly magic resolution to this issue, and, reading around a little more, I discovered that this setting is enabled by default on Windows Server 2008. So, naturally, this left me a little concerned: Why is this setting not enabled by default on 2003, or If it works in 2008 why have Microsoft not issued a patch to enable it by default on 2003? I suspect the answer to the above is the same for both (if there is one). Obviously, we're testing it in a non-production environment, and doing an array of metrics and comparisons to deem if it does help us. But aside from this I'm really just trying to understand if there's any technical reason why we should do this, or if there are any gotchas that we need to be aware of.

    Read the article

  • Backup plan for linux webserver in small business?

    - by radman
    Hi, I am currently in the process of writing a backup plan for the webserver in use by my business. I am very new to this area and have a few ideas about how things should work but am unsure of what tools to use and what sort of restore process is appropriate. I'm looking for something relatively simplistic and it doesn't have to be 100% paranoid just enough to give me a reliable backup. Speed is not of the essence and there is not going to be a live fallback in place. The backup will be onto a single hdd that will be stored onsite (no option for offsite as yet). Backups will be taking place weekly. I am constrained by both time and money which is why I'm aiming for a good enough solution. Is taking an image of the webserver system drive periodically and using that as the backup appropriate? Should I be testing that the backups restore correctly every time that I perform one? This is a bit broad but what setup would you use if you were in my place, given the services I am running? Should I add additonal machines and split the services? Any advice is much appreciated! See below for server details Webserver Platform Linux Ubuntu server Running mail-server svn-server mediawiki wordpress apache-webserver Hardware single 500gb sata drive Architecture Single machine behind router (with firewall) accessible to the internet.

    Read the article

  • Is USB supported in safe mode on XP?

    - by Hugh Allen
    According Microsoft, "Universal Serial Bus Devices Do Not Work in Safe Mode" under XP. However, in my testing this is incorrect. USB keyboards, mice and flash drives seem to work fine in safe mode (I made sure the BIOS was not providing support). This makes sense because a failure of a standard input device would be, in Microsoft parlance, a "bad user experience". So, Is USB supported in safe mode on XP? If your answer is no (agreeing with Microsoft), please provide a test case, preferably in a virtual machine, where a standard HID keyboard or mouse fails. Please state hardware / BIOS / OS configuration. Note that you will need a PS/2 keyboard attached in addition to your USB device(s) in order to use the boot menu. Virtual machine software usually emulates a PS/2 keyboard. Alternatively, you could add the /safeboot switch to boot.ini. If your answer is yes, please provide a link to some supporting documentation (either from Microsoft or someone authoritative). Your answer might be "devices X, Y and Z are supported but nothing else", in which case also give a link.

    Read the article

  • iptables port forward + nginx redirect problem

    - by easthero
    Here is my network browser = proxy(iptables port forward) = nginx server proxy: 192.168.10.204, forward 192.168.10.204:22080 to 192.168.10.10:80 nginx server: 192.168.10.10 nginx version:0.7.65 debian testing in nginx settings, I set: server_name _; server_name_in_redirect off; because my server has no domain now, access 192.168.10.10/index.html or 192.168.10.10/foobar is ok then access 192.168.10.204:22080/index.html is ok but access 192.168.10.204:22080/foobar, nginx 301 redirect to http://192.168.10.204/foobar how to fix? thanks telnet 192.168.10.204 22080 Trying 192.168.10.204... Connected to 192.168.10.204. Escape character is '^]'. GET /index.html HTTP/1.1 Host: 192.168.10.10 HTTP/1.1 200 OK Server: nginx/0.7.65 Date: Fri, 28 May 2010 10:07:29 GMT Content-Type: text/html Content-Length: 12 Last-Modified: Fri, 28 May 2010 07:25:12 GMT Connection: keep-alive Accept-Ranges: bytes hello world telnet 192.168.10.204 22080 Trying 192.168.10.204... Connected to 192.168.10.204. Escape character is '^]'. GET /test2 HTTP/1.1 Host: 192.168.10.10 HTTP/1.1 301 Moved Permanently Server: nginx/0.7.65 Date: Fri, 28 May 2010 10:04:20 GMT Content-Type: text/html Content-Length: 185 Location: http://192.168.10.10/test2/ Connection: keep-alive <html> <head><title>301 Moved Permanently</title></head> <body bgcolor="white"> <center><h1>301 Moved Permanently</h1></center> <hr><center>nginx/0.7.65</center> </body> </html>

    Read the article

  • Windows Server 2012 Hyper-V very slow

    - by Matt Taylor
    I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

    Read the article

  • SSH Private Key Not Working in Some Directories

    - by uesp
    I have a strange issue where SSH won't properly connect with a private-key if the key file is in certain directories. I've setup the keys on a set of servers and the following command ssh -i /root/privatekey [email protected] works fine and I login to the given host without getting prompted by a password, but this command: ssh -i /etc/keyfiles/privatekey [email protected] gives me a password prompt. I've narrowed it down that this behavior occurs in only some sub-directories of /etc/. For example /etc/httpd1/ gives me a password prompt but /etc/httpd/ does not. What I've checked so far: All private key files used are identical (copied from the original file). The private key file and directories used have identical permissions. No relevant error messages in the server/client logs. No interesting debug messages from ssh -v (it just seems to skip the key file). It happens with connecting to different hosts. After more testing it is not the actual directory name. For example: mkdir /etc/test cp /root/privatekey /etc/test ssh -i /etc/test/privatekey [email protected] # Results in password prompt cp /root/privatekey /etc/httpd # Existing directory ls -ald test httpd # drwxr-xr-x 4 root root 4096 Mar 5 18:25 httpd # drwxr-xr-x 2 root root 4096 Mar 5 18:43 test ssh -i /etc/httpd/privatekey [email protected] # Results in *no* prompt rm -r test cp -R /etc/httpd /etc/test ssh -i /etc/test/privatekey [email protected] # Results in *no* prompt` I'm sure its just something simple I've overlooked but I'm at a loss.

    Read the article

  • RAM ok in memtest86+ == RAM ok after wake from sleep?

    - by twon33
    I have a Windows XP (32-bit) system that appears stable in normal operation, but was repeatably freezing (hard lock, no BSOD) a minute or so after waking from S3 sleep. Some Googling against the motherboard model and memory manufacturer suggested that I might need to bump up the memory voltage, so I tried it and it now seems to resume without freezing. However, I don't really trust it and I'd like to validate that it's actually stable, especially after resuming from sleep. I've run Prime95 for a few hours with no issues, and am planning an overnight run of Memtest86+, which I expect to pass because the system has been solid whenever I've run it without putting it to sleep. Does something like Memtest86+ exist that actually invokes S3 sleep during operation? Clearly it would need an operator to wake the computer to resume testing, but I don't think I've ever heard of a memory test tool that can do this. Alternately, am I wasting my time? Should a clean bill of health from Memtest86+ indicate stability regardless of whether sleep is involved, or, conversely, does my original problem indicate that Memtest86+ would have failed eventually with the stock voltage if I'd run it, sleep or not?

    Read the article

  • Can't Install Win2k8 On KVM - Classic 0x80070013 error

    - by javano
    I am trying to install Win2k8 Std as a KVM guest on Debian Squeeze. As you can see from these screen shots; No drives are detected (I have blanked out a 20GB image for testing) - screenshot1 I am using this driver CD: - screenshot2 I have signed the Win7 driver (I assume this was the most appropriate one?) - screenshot3 I can now see an unpartitioned drive - screenshot4 But I can't create a new partition on here, getting the error code 0x80070013 - screenshot5 I have had this error code before but only on a physical server. If I remember correctly it was complaining because the disks were partitioned as GPT (because it was a server that was being re-purposed) so repartitioning with an MS-DOS table fixed that. This is a blank disk image though. What is wrong here, and how can I correct this? Thank you. UPDATE I have booted the VM with a Gparted-Live disk and formatted this volume with an MS-DOS partitioning scheme, and a single 20GB NTFS file system. Now when I boot the Win2k8 CD, load my drivers, I get a different error. As you can see at the bottom of screenshot6 "Windows cannot be installed on this hard drive space. Windows must be installed to a partition formatted as NTFS". Clicking format produces the error (0x80004005) on the screen, so I think this is still a driver issue because Windows can see the drive but not interact with it properly. Is that insane thinking?

    Read the article

  • How do I keep a bridge enabled on a bonded interface?

    - by jlawer
    I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

    Read the article

  • How can I switch from a custom linux network namespace back to the default one?

    - by Martin
    With ip netns exec you can execute a command in a custom network namespace - but is there also a way to execute a command in the default namespace? For example, after executing these two commands: sudo ip netns add test_ns sudo ip netns exec test_ns bash How can the newly created bash execute programs in the default network namespace? There is no ip netns exec default or anything similar as far as I've found. My scenario is: I want to run a SSH server in a separate network namespace (to keep the rest of the system unaware of the network connection, as the system is used for network testing), but want to be able to execute programs in the default network namespace via the SSH connection. What I've found out so far: Created network namespaces are listed as files under /var/run/netns (but there is no file for the default namespace) The ip netns exec code can be found here: http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/tree/ip/ipnetns.c#n132 - I haven't grasped everything that it is doing yet, but it doesn't look very promising. ip netns identify $$ as suggested by Howto query and change network namespace on linux? returns nothing when in the default network namespace

    Read the article

  • Rename Active Directory domain following Windows 2000 -> 2008 migration.

    - by ewwhite
    I'm working with a site that needs an internal DNS domain rename. It currently has a DNS name of domain.abc.com and NT name of ABC. I'm trying to get to a DNS name of abctrading.com and NT name of ABCTRADING. Split DNS would be used. The site originally ran from a single Windows 2000 domain controller hosting AD, file, print, DHCP and DNS services. There was no Exchange system in the environment. The 50 client PCs are all Windows XP with a handful of users using roaming profiles. All users are in a single OU and there are no group policy/GPOs. I'm a Linux engineer, but have been trying to guide another group of consultants to reach a more suitable setup. With the help of this group, we were able to move the single Windows 2000 system to a set of Windows 2008 R2 servers separated into domain controller and file/print systems (virtualized). We are also trying to add an Exchange 2010 system to this mix. The Windows 2000 server was demoted and is no longer in the picture. This is the tricky part, as client wants the domain renamed and the consultants aren't quite sure how to get through it without another 32-40 hours of testing/implementation. THey say that there's considerable risk to do the rename without a completely isolated test environment. However, this rename has to be done before installing Exchange. So we're stuck at this point. I'd like to know what's involved in renaming the domain at this point. We're on Windows Server 2008. The AD is healthy now. Coming from a Linux background, it seems as though there should be a reasonable path to this. Also, since the original domain appears to be a child/subdomain, would that be a problem here. I'd appreciate any guidance.

    Read the article

  • Command line scripts to restore the 4 system databases of MS SQL Server 2008

    - by ciscokid
    Hi there, can someone give me some advice on how to restore the 4 system databases (master, msdb, model, tempdb) of a sql server 2008 please? I've already done some testing myself (on restoring the master database) with the following commad line script as a result: ::set variables set dbname=master set dbdirectory=C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA title Restoring %dbname% database net stop mssqlserver cd C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn sqlservr -m sqlcmd -Slocalhost -E -Q "restore database master from disk='c:\master.bak' WITH REPLACE" net start mssqlserver pause After the execution of the 'sqlservr -m' command (used to start the server instance in single-user mode, which is only necessary when restoring the MASTER database), the script stops. So in order to execute the last 2 commands I need to separate the script into 2 smaller scripts, and run them one after the other. Does anyone has an idea on how I can merge them into one single script that runs completely without any interruption? I also want to restore the other 3 system databases using command line scripts like this one. Can someone please advice me how I need to go on? I've already noticed that restoring the temdb is not so easy, but there has to be a way... Looking forward to your advice!

    Read the article

  • Exchange 2003 ActiveSync problem with certificate

    - by colemanm
    We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

    Read the article

  • Building a computer for the first time from scratch - will this really work?

    - by Nike
    Hey there. I'm building my own computer, and i just finished picking out all of my parts. Now i just want to be sure it'll all work before i order it. I'm mean specifically if the RAM & Graphic card will fit on the motherboard i chose. Below is a list of all parts. I'm sorry, i selected the parts from a Swedish website so it might be hard to understand some parts. Google Translate will help ;) I really appreciate any help/suggestions. Thanks in advance! :) Oh, and here's the parts i mentioned: EDIT: As i'm not allowed to post more than one link here, i'll just link to my homepage: http://nike1.se/c/ I know i didn't choose the most expensive parts, but this won't be my primary computer. I'm only going to use this one for testing purpose, if that makes any sense. I'm sorry for my english, i'm just so tired now. Haha! Once again, thanks in advance! :)

    Read the article

  • smartctl short test doesn't seem to complete

    - by Cédric COPY
    I am working on project which involve automated HDD testing through smartctl. The station is working fine on most product, but I have two specific products that fail the smartctl test. Those two product are both WD product (WD2500BUDT series) Smartctl behaviour is quite strange, in fact the test is launched without any problem, i wait about 2min (test length), and when i check the smartctl, i have got no result at all. It's like I hadn't launched any test (no fail, no success in smartctl result). No error return on command, nothing in syslog, .. As i said before, the test is working for other product, thousands products worked well with this test. The main smartctl command used are : smarctl -t shortest /dev/sdX #Launch test smartctl -l selftest /dev/sdX #Look at test result I have tried to use: smartctl -s on /dev/sdX or smartctl -o on /dev/sdX But doesn't change anything. The system is using Debian 6.0, smartctl v5.40 (rev 3124) x86_64, HDD are plug through SATA to PCI controller. I have 4 HDD connected at a time. Well if anyone has some hints to give with this problem, because I have no idea how can i fix this. Thanks in advance. PS: Not sure if it was a serverfault topic, sorry if i was wrong!

    Read the article

  • Firefox not displaying icons in KhanAcademy

    - by ADTC
    If you don't know what Khan Academy is, check it out. It's awesome. (For testing purpose you may view any video on the website.) My problem -- it's a minor problem, but annoying -- is that in Firefox (Windows 7), the icons below the video are shown as boxes with hex codes in them. This means the icons come from some font that isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I checked out the source and found that the font in question is called "FontAwesome". I found this question in S.O. that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. Also, would manually downloading the font and adding it to Windows' Fonts folder help? I tried this with the TTF font, and it does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

    Read the article

  • ubuntu 10.04 + php + postfix

    - by mononym
    I have a server I am running: Ubuntu 10.04 php 5.3.5 (fpm) Nginx I have installed postfix, and set it to loopback-only (only need to send) The problem is it is not sending. if i issue (at command line): echo "testing local delivery" | mail -s "test email to localhost" [email protected] I get the email no problem, but through PHP it does not arrive. When I send it via PHP, mail.log shows: Mar 28 10:15:04 host postfix/pickup[32102]: 435EF580D7: uid=0 from=<root> Mar 28 10:15:04 host postfix/cleanup[32229]: 435EF580D7: message-id=<20120328091504.435EF580D7@FQDN> Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: from=<root@FQDN>, size=1127, nrcpt=1 (queue active) Mar 28 10:15:04 host postfix/local[32230]: 435EF580D7: to=<root@FQDN>, orig_to=<root>, relay=local, delay=3.1, delays=3/0.01/0/0.09, dsn=2.0.0, status=sent (delivered to maildir) Mar 28 10:15:04 host postfix/qmgr[32103]: 435EF580D7: removed any help appreciated, my main.cf file: smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = FQDN alias_maps = hash:/etc/aliasesalias_database = hash:/etc/aliases myorigin = /etc/mailname #myorigin = $mydomain mydestination = FQDN, localhost.FQDN, , localhost relayhost = $mydomain mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only virtual_alias_maps = hash:/etc/postfix/virtual home_mailbox = mail/

    Read the article

  • Node js server not responding outside localhost centos

    - by David Martinez
    I'm running a basic express server from CentOS but for some reason it is not responding outside of localhost, I have tried everything I have found on google but nothing works so far. This is my express server: app.listen(3000,"0.0.0.0"); If I do curl http://localhost:3000/ in the server it works fine. If I curl to the ip of the server it doesn't work. I already changed my iptables num target prot opt source destination 1 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 2 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 3 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:3000 There is currently a apache server running on port 80 with no problems. I also tried setting a VirtualHost on apache but it didn't work either: <VirtualHost *:80> ServerName SubDOmain.MyDomain.com ProxyRequests off <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:3000/ ProxyPassReverse / http://localhost:3000/ ProxyPreserveHost on </VirtualHost> There is another virtual host working fine that redirects to another DocumentRoot. I'm running Node on root for testing purpose, but the node application owner is another user. All folders have 705 and files 664 Edit: I stopped apache and run my node app on port 80 and it working fine, I could access node app from my ip and domain.

    Read the article

< Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >