dynamic linq - Page 408

Html.RenderAction Failed when Validation Failed

- by Shaun

RenderAction method had been introduced when ASP.NET MVC 1.0 released in its MvcFuture assembly and then final announced along with the ASP.NET MVC 2.0. Similar as RenderPartial, the RenderAction can display some HTML markups which defined in a partial view in any parent views. But the RenderAction gives us the ability to populate the data from an action which may different from the action which populating the main view. For example, in Home/Index.aspx we can invoke the Html.RenderPartial(“MyPartialView”) but the data of MyPartialView must be populated by the Index action of the Home controller. If we need the MyPartialView to be shown in Product/Create.aspx we have to copy (or invoke) the relevant code from the Index action in Home controller to the Create action in the Product controller which is painful. But if we are using Html.RenderAction we can tell the ASP.NET MVC from which action/controller the data should be populated. in that way in the Home/Index.aspx and Product/Create.aspx views we just need to call Html.RenderAction(“CreateMyPartialView”, “MyPartialView”) so it will invoke the CreateMyPartialView action in MyPartialView controller regardless from which main view. But in my current project we found a bug when I implement a RenderAction method in the master page to show something that need to connect to the backend data center when the validation logic was failed on some pages. I created a sample application below. Demo application I created an ASP.NET MVC 2 application and here I need to display the current date and time on the master page. I created an action in the Home controller named TimeSlot and stored the current date into ViewDate. This method was marked as HttpGet as it just retrieves some data instead of changing anything. 1: [HttpGet] 2: public ActionResult TimeSlot() 3: { 4: ViewData["timeslot"] = DateTime.Now; 5: return View("TimeSlot"); 6: } Next, I created a partial view under the Shared folder to display the date and time string. 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<dynamic>" %> 2: 3: <span>Now: <% 1: : ViewData["timeslot"].ToString() %></span> Then at the master page I used Html.RenderAction to display it in front of the logon link. 1: <div id="logindisplay"> 2: <% 1: Html.RenderAction("TimeSlot", "Home"); %> 3: 4: <% 1: Html.RenderPartial("LogOnUserControl"); %> 5: </div> It’s fairly simple and works well when I navigated to any pages. But when I moved to the logon page and click the LogOn button without input anything in username and password the validation failed and my website crashed with the beautiful yellow page. (I really like its color style and fonts…) How ASP.NET MVC executes Html.RenderAction In this example all other pages were rendered successful which means the ASP.NET MVC found the TimeSolt action under the Home controller except this situation. The only different is that when I clicked the LogOn button the browser send an HttpPost request to the server. Is that the reason of this bug? I created another action in Home controller with the same action name but for HttpPost. 1: [HttpPost] 2: [ActionName("TimeSlot")] 3: public ActionResult TimeSlot(object dummy) 4: { 5: return TimeSlot(); 6: } Or, I can use the AcceptVerbsAttribute on the TimeSlot action to let it allow both HttpGet and HttpPost. 1: [AcceptVerbs("GET", "POST")] 2: public ActionResult TimeSlot() 3: { 4: ViewData["timeslot"] = DateTime.Now; 5: return View("TimeSlot"); 6: } And then repeat what I did before and this time it worked well. Why we need the action for HttpPost here as it’s just data retrieving? That is because of how ASP.NET MVC executes the RenderAction method. In the source code of ASP.NET MVC we can see when proforming the RenderAction ASP.NET MVC creates a RequestContext instance from the current RequestContext and created a ChildActionMvcHandler instance which inherits from MvcHandler class. Then the ASP.NET MVC processes the handler through the HttpContext.Server.Execute method. That means it performs the action as a stand-alone request asynchronously and flush the result into the TextWriter which is being used to render the current page. Since when I clicked the LogOn the request was in HttpPost so when ASP.NET MVC processed the ChildActionMvcHandler it would find the action which allow the current request method, which is HttpPost. Then our TimeSlot method in HttpGet would not be matched. Summary In this post I introduced a bug in my currently developing project regards the new Html.RenderAction method provided within ASP.NET MVC 2 when processing a HttpPost request. In ASP.NET MVC world the underlying Http information became more important than in ASP.NET WebForm world. We need to pay more attention on which kind of request it currently created and how ASP.NET MVC processes. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Selling Visual Studio ALM

- by Tarun Arora

Introduction As a consultant I have been selling Application Lifecycle Management services using Visual Studio and Team Foundation Server. I’ve been contacted various times by friends working in organization telling me that ALM processes in their company were benchmarked when dinosaurs walked the earth. Most of these individuals already know the great features Microsoft ALM tools offer and are keen to start a conversation with the CIO but don’t exactly know where to start. It is very important how you engage in your first conversation, if you start the conversation with ‘There is this great tooling from Microsoft which offers amazing features to boost developer productivity, … ‘ from experience I can tell you the reply from your CIO would be ‘I already know! Our existing landscape has a combination of bleeding edge open source and cutting edge licensed tools which already cover these features quite well, more over Microsoft products have a high licensing cost associated to them.’ You will always find it harder to sell by feature, the trick is to highlight the gap in the existing processes & tools and then highlight the impact of these gaps to the overall development processes, by now you would have captured enough attention to show off how the ALM tooling offered by Microsoft not only fills those gaps but offers great value adds to take their development practices to the next level. Rangers ALM Assessment Guide Image 1 – Welcome! First look at the Rangers ALM assessment guide Most organization already have some processes in place to cover aspects of ALM. How do you go about proving that there isn’t enough cover in place? This is where Visual Studio ALM Rangers ALM Assessment guide can help. The ALM assessment guide is really a tool that helps you gather information about Development practices and processes within a customer's environment. Several questionnaires are used to identify the current state of individual development lifecycle areas and decide on a desired state for those processes. It also presents guidance and roll-up summaries to help with recommendations moving forward. The ALM Rangers assessment guide can be downloaded from here. Image 2 – ALM Assessment guide divided into different functions of SDLC The assessment guide is divided into different functions of Software Development Lifecycle (listed below), this gives you the ability to access how mature the company is in different areas of SDLC. Architecture & Design Requirement Engineering & UX Development Software Configuration Management Governance Deployment & Operations Testing & Quality Assurance Project Planning & Management Each section has a set of questions, fill in the assessment by selecting “Never/Sometimes/Always” from the Answer column in the question sheets. Each answer has weightage to the overall score. Each question has a link next to it, clicking the link takes you to the Reference sheet which gives you more details about the question along with a reason for “why you need to ask this question?”, “other ways to phrase the question” and “what to expect as an answer from the customer”. The trick is to engage the customer in a discussion. You need to probe a lot, listen to the customer and have a discussion with several team members, preferably without management to ensure that you receive candid feedback. This reminds me of a funny incident when during an ALM review a customer told me that they have a sophisticated semi-automated application deployment process, further discussions revealed that deployment actually involved 72 manual configuration steps per production node. Such observations can be recorded in the Issue Brainstorming worksheet for further consideration later. It is also worth mentioning the different levels of ALM maturity to the customer. By default the desired state of ALM maturity is set to Standard, it is possible to set a desired state by area, you should strive for Advanced or Dynamic, it always helps by explaining the classification and advantages. Image 3 – ALM levels by description The ALM assessment guide helps you arrive at a quantitative measure of the company’s ALM maturity. The resultant graph plotted on a spider’s web shows you the company’s current state of ALM maturity and the desired state of ALM maturity. Further since the results are classified by area you can immediately spot the areas where the customer needs immediate help. Image 4 – The spiders web! The red cross icons are areas shouting out for immediate attention, the yellow exclamation icons are areas that need improvement. These icons are calculated on the difference between the Current State of ALM maturity VS the Desired state of ALM maturity. Image 5 – Results by area Conclusion To conclude the Rangers ALM assessment guide gives you the ability to, Measure the customer’s current ALM maturity level Understand the ALM maturity level the customer desires to achieve Capture a healthy list of issues the customer wants to brainstorm further Now What’s next…? Download and get started with the Rangers ALM Assessment Guide. If you have successfully captured the above listed three pieces of information you are in a great state to make recommendations on the identified areas highlighting the benefits that Visual Studio ALM tools would offer. In the next post I will be covering how to take the ALM assessment results as the base to actually convert your recommendation into a sell. Remember to subscribe to http://feeds.feedburner.com/TarunArora. I would love to hear your feedback! If you have any recommendations on things that I should consider or any questions or feedback, feel free to leave a comment. *** A special thanks goes out to fellow ranges Willy, Ethem and Philip for reviewing the blog post and providing valuable feedback. ***

Read the article

SPARC M7 Chip - 32 cores - Mind Blowing performance

- by Angelo-Oracle

The M7 Chip Oracle just announced its Next Generation Processor at the HotChips HC26 conference. As the Tech Lead in our Systems Division's Partner group, I had a front row seat to the extraordinary price performance advantage of Oracle current T5 and M6 based systems. Partner after partner tested these systems and were impressed with it performance. Just read some of the quotes to see what our partner has been saying about our hardware. We just announced our next generation processor, the M7. This has 32 cores (up from 16-cores in T5 and 12-cores in M6). With 20 nm technology this is our most advanced processor. The processor has more cores than anything else in the industry today. After the Sun acquisition Oracle has released 5 processors in 4 years and this is the 6th. The S4 core The M7 is built using the foundation of the S4 core. This is the next generation core technology. Like its predecessor, the S4 has 8 dynamic threads. It increases the frequency while maintaining the Pipeline depth. Each core has its own fine grain power estimator that keeps the core within its power envelop in 250 nano-sec granularity. Each core also includes Software in Silicon features for Application Acceleration Support. Each core includes features to improve Application Data Integrity, with almost no performance loss. The core also allows using part of the Virtual Address to store meta-data. User-Level Synchronization Instructions are also part of the S4 core. Each core has 16 KB Instruction and 16 KB Data L1 cache. The Core Clusters The cores on the M7 chip are organized in sets of 4-core clusters. The core clusters share L2 cache. All four cores in the complex share 256 KB of 4 way set associative L2 Instruction Cache, with over 1/2 TB/s of throughput. Two cores share 256 KB of 8 way set associative L2 Data Cache, with over 1/2 TB/s of throughput. With this innovative Core Cluster architecture, the M7 doubles core execution bandwidth. to maximize per-thread performance. The Chip Each M7 chip has 8 sets of these core-clusters. The chip has 64 MB on-chip L3 cache. This L3 caches is shared among all the cores and is partitioned into 8 x 8 MB chunks. Each chunk is 8-way set associative cache. The aggregate bandwidth for the L3 cache on the chip is over 1.6TB/s. Each chip has 4 DDR4 memory controllers and can support upto 16 DDR4 DIMMs, allowing for 2 TB of RAM/chip. The chip also includes 4 internal links of PCIe Gen3 I/O controllers. Each chip has 7 coherence links, allowing for 8 of these chips to be connected together gluelessly. Also 32 of these chips can be connected in an SMP configuration. A potential system with 32 chips will have 1024 cores and 8192 threads and 64 TB of RAM. Software in Silicon The M7 chip has many built in Application Accelerators in Silicon. These features will be exposed to our Software partners using the SPARC Accelerator Program. The M7 has built-in logic to decompress data at the speed of memory access. This means that applications can directly work on compressed data in memory increasing the data access rates. The VA Masking feature allows the use of part of the virtual address to store meta-data. Realtime Application Data Integrity The Realtime Application Data Integrity feature helps applications safeguard against invalid, stale memory reference and buffer overflows. The first 4-bits if the Pointer can be used to store a version number and this version number is also maintained in the memory & cache lines. When a pointer accesses memory the hardware checks to make sure the two versions match. A SEGV signal is raised when there is a mismatch. This feature can be used by the Database, applications and the OS. M7 Database In-Memory Query Accelerator The M7 chip also includes a In-Silicon Query Engines. These accelerate tasks that work on In-Memory Columnar Vectors. Oracle In-Memory options stores data in Column Format. The M7 Query Engine can speed up In-Memory Format Conversion, Value and Range Comparisons and Set Membership lookups. This engine can work on Compressed data - this means not only are we accelerating the query performance but also increasing the memory bandwidth for queries. SPARC Accelerated Program At the Hotchips conference we also introduced the SPARC Accelerated Program to provide our partners and third part developers access to all the goodness of the M7's SPARC Application Acceleration features. Please get in touch with us if you are interested in knowing more about this program.

Read the article

Code Structure / Level Design: Plants vs Zombies game level dissection

- by lalan

Hi Friends, I am interested in learning the class structure of Plants vs Zombies, particularly level design; for those who haven't played it - this video contains nice play-through: http://www.youtube.com/watch?v=89DfdOIJ4xw. How would I go ahead and design the code, mostly structure & classes, which allows for maximum flexibility & clean development? I am familiar with data driven design concepts, and would use events to handle most of dynamic behavior. Dissection at macro level: (Once every Level) Load tilemap, props, etc -- basically build the map (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) Show Enemies you'll face during present level (Once every Level) Unit Selection Window/Panel - selection of defensive plants (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) HUD Creation - based on unit selection (Level Loop) Enemy creation - based on types of zombies allowed (Level Loop) Sun/Resource generation (Level Loop) Show messages like 'huge wave of zombies coming', 'final wave' (Level Loop) Other unique events - Spawn gifts, money, tombstones, etc (Once every Level) Unlock new plant Potential game scripts: a) Level definitions: Level_1_1.xml, Level_1_2.xml, etc. Level_1_1.xml :: Sample script <map> <tilemap>tilemapFrontLawn</tilemap> <SpawnPoints> tiles where particular type of zombies (land vs water) may spawn</spawnPoints> <props> position, entity array -- lawnmower, </props> </map> <zombies> <... list of zombies who gonna attack by ids...> </zombies> <plants> <... list by plants which are available for defense by ids...> </plants> <progression> <ZombieWave name='first wave' spawnScript='zombieLightWave.lua' unlock='null'> <startMessages time=1.5>Ready</startMessages> <endMessages time=1.5>Huge wave of zombies incoming</endMessages> </ZombieWave> </progression> b) Entities definitions: .xmls containing zombies, plants, sun, lawnmower, coins, etc description. Potential classes: //LevelManager - Based on the level under play, it will load level script. Few of the // functions it may have: class LevelManager { public: bool load(string levelFileName); bool enter(); bool update(float deltatime); bool exit(); private: LevelData* mLevelData; } // LevelData - Contains the details of level loaded by LevelManager. class LevelData { private: string file; // array of camera,dialog,attackwaves, etc in active level LevelCutSceneCamera** mArrayCutSceneCamera; LevelCutSceneDialog** mArrayCutSceneDialog; LevelAttackWave** mArrayAttackWave; .... // which camera,dialog,attackwave is active in level uint mCursorCutSceneCamera; uint mCursorCutSceneDialog; uint mCursorAttackWave; public: // based on cursor, get the next camera,dialog,attackwave,etc in active level // return false/true based on failure/success bool nextCutSceneCamera(LevelCutSceneCamera**); bool nextCutSceneDialog(LevelCutSceneDialog**); } // LevelUnderPlay- LevelManager class LevelUnderPlay { private: LevelCutSceneCamera* mCutSceneCamera; LevelCutSceneDialog* mCutSceneDialog; LevelAttackWave* mAttackWave; Entities** mSelectedPlants; Entities** mAllowedZombies; bool isCutSceneCameraActive; public: bool enter(); bool update(float deltatime); bool exit(); } I am totally confused.. :( Does it make sense of using class composition (have flat class hierarchy) for managing levels. Is it a good idea to just add/remove/update sprites (or any drawable stuff) to current scene from LevelManager or LevelUnderPlay? If I want to make non-linear level design, how should I go ahead? Perhaps I would need a LevelProgression class, which would decide what to do based on decision tree. Any suggestions would be appreciated very much. Thank for your time, lalan

Read the article

Backpacks and Booth Paint: TechEd 2012

- by The Un-T Guy

Arriving in the parking lot of the Orange County Convention Center, I immediately knew I was in the right place. As far as the eye could see, the acres of asphalt were awash in backpacks, quirky (to be kind) outfits, and bad haircuts. This was the place. This was Microsoft Mecca v2012 for geeks and nerds, the Central Florida event of the year, a gathering of high tech professionals whose skills I both greatly respect and, frankly, fear a little. I was wholly and completely out of element, a dork in a vast sea of geek jumbo. It like was wearing dockers and a golf shirt walking into a RenFaire, but one with really crappy costumes and no turkey legs...save those attached to some of the attendees. Of course the corporate whores...errrr, vendors were in place, ready to parlay the convention's fre-nerd-ic energy into millions of dollars by convincing the big-brained and under-sexed in the crowd (i.e., virtually all of them...present company excluded, of course) that their product or service was the only thing standing between them and professional success, industry fame, and clear skin. "With KramTech 2012," they seemed to scream, "you will be THE ROCK STAR of your company's IT department!" As car shows and tattoo parlors learned long ago, Tech companies seem to believe that the best way to attract the attention of this crowd is through the hint of the promise of sex. They recruit and deploy an army of "sales reps" whose primary qualifications appear to be long hair, short skirts, high heels, and a vagina. Unlike their distant cousins in the car and body art industries, however, this sub-species of booth paint (semi-gloss decoration that adds nothing to the substance of the product) seems torn between committing to being all-out sex objects and recognition that they are in the presence of intelligent, discerning people. People who are smart enough to know exactly what these vendors are doing. Also unlike their distant car show and tattoo shop cousins, these young women (what…are there no gay tech professionals who could use some eye candy?) seem to realize that while IT remains a male-dominated field, there are ever-increasing numbers of intelligent, capable, strong professional women – women who’ve battled to make it in this field through hard work and work performance rather than a hard body and performing after work. This is not to say that all of the young female sales reps are there only because of their physical attributes. Many are competent, intelligent, and driven -- not to mention attractive. They're working hard on the front lines of delivering the next generation of technology. The distinction is pretty clear, however, between these young professionals and the booth paint. The former enthusiastically deliver credible information about the products they’re hawking. The latter are positioned in the aisles, uncomfortably avoiding eye contact as they struggle to operate the badge readers. Surprisingly, not all of the women in attendance seemed to object to the objectification of their younger sisters. One IT professional woman who came of age in the industry (mostly in IT marketing) said, “I have no problem with it. I was a ‘booth babe’ for years and it doesn’t bother me at all.” Others, however, weren’t quite so gracious. One woman I spoke with, an IT manager from Cheyenne, Wyoming, said it was demeaning and frankly, as more and more women grow into IT management positions, not a great marketing idea. “Using these young women is, to me, no different than vendors giving out t-shirts to attract attention. It’s sad because it’s still hard for a woman to be respected in the IT field and this just perpetuates the outdated notion that IT is a male-dominated field.” She went on to say that decisions by vendors to employ these young women in this “inappropriate way” could impact her purchasing decisions. “I might be swayed toward a vendor who has women on staff who are intelligent and dynamic rather than the vendors who use the ‘decoration’ girls.” So in many ways, the IT industry is no different than most other industries as it struggles to maximize performance by finding and developing talent – all of the talent, not just the 50% with a penis. Women in IT, like their brethren, struggle to find their niche in the field, to grow professionally, and reach for the brass ring, struggling to overcome obstacles as they climb the mountain of professional success in a never-ending cycle of economic uncertainty. But as (generally) well-educated and highly-trained professionals, they are probably better positioned than those in many other industries. Beside, they’ve got one other advantage over their non-IT counterparts as they attempt their ascent to the summit: They’ve already got the backpacks.

Read the article

Oracle ATG Web Commerce 10 Implementation Developer Boot Camp - Reading (UK) - October 1-12, 2012

- by Richard Lefebvre

REGISTER NOW: Oracle ATG Web Commerce 10 Implementation Developer Boot Camp Reading, UK, October 1-12, 2012! OPN invites you to join us for a 10-day implementation bootcamp on Oracle ATG Web Commerce in Reading, UK from October 1-12, 2012.This 10-day boot camp is designed to provide partners with hands-on experience and technical training to successfully build and deploy Oracle ATG Web Commerce 10 Applications. This particular boot camp is focused on helping partners develop the essential skills needed to implement every aspect of an ATG Commerce Application from scratch, (not CRS-based), with a specific goal of enabling experienced Java/J2EE developers with a path towards becoming functional, effective, and contributing members of an ATG implementation team. Built for both new and experienced ATG developers alike, the collaborative nature of this program and its exercises, have proven to be highly effective and extremely valuable in learning the best practices for implementing ATG solutions. Though not required, this bootcamp provides a structured path to earning a Certified Oracle ATG Web Commerce 10 Specialization! What Is Covered: This boot camp is for Application Developers and Software Architects wanting to gain valuable insight into ATG application development best practices, as well as relevant and applicable implementation experience on projects modeled after four of the most common types of applications built on the ATG platform. The following learning objectives are all critical, and are of equal priority in enabling this role to succeed. This learning boot camp will help with: Building a basic functional transaction-ready ATG Web Commerce 10 Application. Utilizing ATG’s platform features such as scenarios, slots, targeters, user profiles and segments, to create a personalized user experience. Building Nucleus components to support and/or extend application functionality. Understanding the intricacies of ATG order checkout and fulfillment. Specifying, designing and implementing new commerce features in ATG 10. Building a functional commerce application modeled after four of the most common types of applications built on the ATG platform, within an agile-based project team environment and under simulated real-world project conditions. Duration: The Oracle ATG Web Commerce 10 Implementation Developer Boot Camp is an instructor-led workshop spanning 10 days. Audience: Application Developers Software Architects Prerequisite Training and Environment Requirements: Programming and Markup Experience with Java J2EE, JavaScript, XML, HTML and CSS Completion of Oracle ATG Web Commerce 10 Implementation Specialist Development Guided Learning Path modules Participants will be required to bring their own laptop that meets the minimum specifications: 64-bit PC and OS (e.g. Windows 7 64-bit) 4GB RAM or more 40GB Hard Disk Space Laptops will require access to the Internet through Remote Desktop via Windows. Agenda Topics: Week 1 – Day 1 through 5 Build a Basic Commerce Application In week one of the boot camp training, we will apply knowledge learned from the ATG Web Commerce 10 Implementation Developer Guided Learning Path modules, towards building a basic transaction-ready commerce application. There will be little to no lectures delivered in this boot camp, as developers will be fully engaged in ATG Application Development activities and best practices. Developers will work independently on the following lab assignments from day's 1 through 5: Lab Assignments 1 Environment Setup 2 Build a dynamic Home Page 3 Site Authentication 4 Build Customer Registration 5 Display Top Level Categories 6 Display Product Sub-Categories 7 Display Product List Page 8 Display Product Detail Page 9 ATG Inventory 10 Build “Add to Cart” Functionality 11 Build Shopping Cart 12 Build Checkout Page 13 Build Checkout Review Page 14 Create an Order and Build Order Confirmation Page 15 Implement Slots and Targeters for Personalization 16 Implement Pricing and Promotions 17 Order Fulfillment Back to top Week 2 – Day 6 through 10 Team-based Case Project In the second week of the boot camp training, participants will be asked to join a project team that will select a case project for the team to implement. Teams will be able to choose from four of the most common application types developed and deployed on the ATG platform. They are as follows: Hard goods with physical fulfillment, Soft goods with electronic fulfillment, a Service or subscription case example, a Course/Event registration case example. Team projects will have approximately 160 hours of use cases/stories for each team to build (40 hours per developer). Each day's Use Cases/Stories will build upon the prior day's work, and therefore must be fully completed at the end of each day. Please note that this boot camp intends to simulate real-world project conditions, and as such will likely require the need for project teams to possibly work beyond normal business hours. To promote further collaboration and group learning, each team will be asked to present their work and share the methodologies and solutions that they've applied to their cases at the end of each day. Location: Oracle Reading CVC TPC510 Room: Wraysbury Reading, UK 9:00 AM – 5:00 PM Registration Fee (10 Days): US $3,375 Please click on the following link to REGISTER or visit the Oracle ATG Web Commerce 10 Implementation Developer Boot Camp page for more information. Questions: Patrick Ty Partner Enablement, Oracle Commerce Phone: 310.343.7687 Mobile: 310.633.1013 Email: [email protected]

Read the article

ACORD LOMA Session Highlights Policy Administration Trends

- by [email protected]

Helen Pitts, senior product marketing manager for Oracle Insurance, attended and is blogging from the ACORD LOMA Insurance Forum this week. Above: Paul Vancheri, Chief Information Officer, Fidelity Investments Life Insurance Company. Vancheri gave a presentation during the ACORD LOMA Insurance Systems Forum about the key elements of modern policy administration systems and how insurers can mitigate risk during legacy system migrations to safely introduce new technologies. When I had a few particularly challenging honors courses in college my father, a long-time technology industry veteran, used to say, "If you don't know how to do something go ask the experts. Find someone who has been there and done that, don't be afraid to ask the tough questions, and apply and build upon what you learn." (Actually he still offers this same advice today.) That's probably why my favorite sessions at industry events, like the ACORD LOMA Insurance Forum this week, are those that include insight on industry trends and case studies from carriers who share their experiences and offer best practices based upon their own lessons learned. I had the opportunity to attend a particularly insightful session Wednesday as Craig Weber, senior vice president of Celent's Insurance practice, and Paul Vancheri, CIO of Fidelity Life Investments, presented, "Managing the Dynamic Insurance Landscape: Enabling Growth and Profitability with a Modern Policy Administration System." Policy Administration Trends Growing the business is the top issue when it comes to IT among both life and annuity and property and casualty carriers according to Weber. To drive growth and capture market share from competitors, carriers are looking to modernize their core insurance systems, with 65 percent of those CIOs participating in recent Celent research citing plans to replace their policy administration systems. Weber noted that there has been continued focus and investment, particularly in the last three years, by software and technology vendors to offer modern, rules-based, configurable policy administration solutions. He added that these solutions are continuing to evolve with the ongoing aim of helping carriers rapidly meet shifting business needs--whether it is to launch new products to market faster than the competition, adapt existing products to meet shifting consumer and /or regulatory demands, or to exit unprofitable markets. He closed by noting the top four trends for policy administration either in the process of being adopted today or on the not-so-distant horizon for the future: Underwriting and service desktops New business automation Convergence of ultra-configurable and domain content-rich systems Better usability and screen design Mitigating the Risk When Making the Decision to Modernize Third-party analyst research from advisory firms like Celent was a key part of the due diligence process for Fidelity as it sought a replacement for its legacy policy administration system back in 2005, according to Vancheri. The company's business opportunities were outrunning system capability. Its legacy system had not been upgraded in several years and was deficient from a functionality and currency standpoint. This was constraining the carrier's ability to rapidly configure and bring new and complex products to market. The company sought a new, modern policy administration system, one that would enable it to keep pace with rapid and often unexpected industry changes and ahead of the competition. A cross-functional team that included representatives from finance, actuarial, operations, client services and IT conducted an extensive selection process. This process included deep documentation review, pilot evaluations, demonstrations of required functionality and complex problem-solving, infrastructure integration capability, and the ability to meet the company's desired cost model. The company ultimately selected an adaptive policy administration system that met its requirements to: Deliver ease of use - eliminating paper and rework, while easing the burden on representatives to sell and service annuities Provide customer parity - offering Web-based capabilities in alignment with the company's focus on delivering a consistent customer experience across its business Deliver scalability, efficiency - enabling automation, while simplifying and standardizing systems across its technology stack Offer desired functionality - supporting Fidelity's product configuration / rules management philosophy, focus on customer service and technology upgrade requirements Meet cost requirements - including implementation, professional services and licenses fees and ongoing maintenance Deliver upon business requirements - enabling the ability to drive time to market for new products and flexibility to make changes Best Practices for Addressing Implementation Challenges Based upon lessons learned during the company's implementation, Vancheri advised carriers to evaluate staffing capabilities and cultural impacts, review business requirements to avoid rebuilding legacy processes, factor in dependent systems, and review policies and practices to secure customer data. His formula for success: upfront planning + clear requirements = precision execution. Achieving a Return on Investment Vancheri said the decision to replace their legacy policy administration system and deploy a modern, rules-based system--before the economic downturn occurred--has been integral in helping the company adapt to shifting market conditions, while enabling growth in its direct channel sales of variable annuities. Since deploying its new policy admin system, the company has reduced its average time to market for new products from 12-15 months to 4.5 months. The company has since migrated its other products to the new system and retired its legacy system, significantly decreasing its overall product development cycle. From a processing standpoint Vancheri noted the company has achieved gains in automation, information, and ease of use, resulting in improved real-time data edits, controls for better quality, and tax handling capability. Plus, with by having only one platform to manage, the company has simplified its IT environment and is well positioned to deliver system enhancements for greater efficiencies. Commitment to Continuing the Investment In the short and longer term future Vancheri said the company plans to enhance business functionality to support money movement, wire automation, divorce processing on payout contracts and cost-based tracking improvements. It also plans to continue system upgrades to remain current as well as focus on further reducing cycle time, driving down maintenance costs, and integrating with other products. Helen Pitts is senior product marketing manager for Oracle Insurance focused on life/annuities and enterprise document automation.

Read the article

Performing a clean database creation using msbuild

- by Robert May

So I’m taking a break from writing about other Agile stuff for a post. :) I’m still going to get back to the other subjects, but this is fun too. Something I’ve done quite a bit of is MSBuild and CI work. I’m experimenting with ways to improve what I’ve done in the past, particularly around database CI. Today, I developed a mechanism for starting from scratch with your database. By scratch, I mean blowing away the existing database and creating it again from a single command line call. I’m a firm believer that developers should be able to get to a known clean state at the database level with a single command and that they should be operating off of their own isolated database to improve productivity. These scripts will help that. Here’s how I did it. First, we have to disconnect users. I did so using the help of a script from sql server central. Note that I’m using sqlcmd variable replacement. -- kills all the users in a particular database -- dlhatheway/3M, 11-Jun-2000 declare @arg_dbname sysname declare @a_spid smallint declare @msg varchar(255) declare @a_dbid int set @arg_dbname = '$(DatabaseName)' select @a_dbid = sdb.dbid from master..sysdatabases sdb where sdb.name = @arg_dbname declare db_users insensitive cursor for select sp.spid from master..sysprocesses sp where sp.dbid = @a_dbid open db_users fetch next from db_users into @a_spid while @@fetch_status = 0 begin select @msg = 'kill '+convert(char(5),@a_spid) print @msg execute (@msg) fetch next from db_users into @a_spid end close db_users deallocate db_users GO Once all users are booted from the database, we can commence with recreating the database. I generated the script that is used to create a database from SQL Server management studio, so I’m only going to show the bits that weren’t generated that are important. There are a bunch of Alter Database statements that aren’t shown. First, I had to find the default location of the database files in the install, since they can be in many different locations. I used Method 1 from a technet blog and then modified it a bit to do what I needed to do. I ended up using dynamic SQL because for the life of me, I couldn’t get the “Filename” property to not return an error when I used anything besides a string. I’m dropping the database first, if it exists. Here’s the code: IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = N'$(DatabaseName)') BEGIN drop database $(DatabaseName) END; go IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; -- Create temp database. Because no options are given, the default data and --- log path locations are used CREATE DATABASE zzTempDBForDefaultPath; DECLARE @Default_Data_Path VARCHAR(512), @Default_Log_Path VARCHAR(512); --Get the default data path SELECT @Default_Data_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 0); --Get the default Log path SELECT @Default_Log_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 1); --Clean up. IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; DECLARE @SQL nvarchar(max) SET @SQL= 'CREATE DATABASE $(DatabaseName) ON PRIMARY ( NAME = N''$(DatabaseName)'', FILENAME = N''' + @Default_Data_Path + N'$(DatabaseName)' + '.mdf' + ''', SIZE = 2048KB , FILEGROWTH = 1024KB ) LOG ON ( NAME = N''$(DatabaseName)Log'', FILENAME = N''' + @Default_Log_Path + N'$(DatabaseName)' + '.ldf' + ''', SIZE = 1024KB , FILEGROWTH = 10%) ' exec (@SQL) GO And with that, your database is created. You can run these scripts on any server and on any database name. To do that, I created an MSBuild script that looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0"> <PropertyGroup> <DatabaseName>MyDatabase</DatabaseName> <Server>localhost</Server> <SqlCmd>sqlcmd -v DatabaseName=$(DatabaseName) -S $(Server) -i </SqlCmd> <ScriptDirectory>.\Scripts</ScriptDirectory> </PropertyGroup> <Target Name ="Rebuild"> <ItemGroup> <ScriptFiles Include="$(ScriptDirectory)\*.sql"/> </ItemGroup> <Exec Command="$(SqlCmd) "%(ScriptFiles.Identity)"" ContinueOnError="false"/> </Target> </Project> Note that the Scripts directory is underneath the directory where I’m running the msbuild command and is relative to that directory. Note also that the target is using batching to run each script in the scripts subdirectory, one after the other. Each script is passed to the sqlcmd command line execution using the .Identity property on the itemgroup that is created. This target file is saved in the file “Database.target”. To make this work, you’ll need msbuild in your path, and then run the following command: msbuild database.target /target:Rebuild Once you’ve got your virgin database setup, you’d then need to use a tool like dbdeploy.net to determine that it was a virgin database, build a change script based on the change scripts, and then you’d want another sqlcmd call to update the database with the appropriate scripts. I’m doing that next, so I’ll post a blog update when I’ve got it working. Technorati Tags: MSBuild,Agile,CI,Database

Read the article

Silverlight Cream for January 11, 2011 -- #1024

- by Dave Campbell

1,000 blogposts is quite a few, but to die-hard geeks, 1000 isn't the number... 1K is the number, and today is my 1K blogpost! I've been working up to this for at least 11 months. Way back at MIX10, I approached some vendors about an idea I had. A month ago I contacted them and others, and everyone I contacted was very generous and supportive of my idea. My idea was not to run a contest, but blog as normal, and whoever ended up on my 1K post would get some swag... and I set a cut-off at 13 posts. So... blogging normally, I had some submittals, and then ran my normal process to pick up the next posts until I hit a total of 13. To provide a distribution channel for the swag, everyone on the list, please send me your snail mail (T-shirts) and email (licenses) addresses as soon as possible. I'd like to thank the following generous sponsors for their contributions to my fun (in alphabetic order): and Rachel Hawley for contributing 4 Silverlight control sets First Floor Software and Koen Zwikstra for contributing 13 licenses for Silverlight Spy and Sara Faatz/Jason Beres for contributing 13 licenses for Silverlight Data Visualization controls and Svetla Stoycheva for contributing T-Shirts for everyone on the post and Ina Tontcheva for contributing 13 licenses for RadControls for Silverlight + RadControls for Windows Phone and Charlene Kozlan for contributing 1 combopack standard, 2 DataGrid for Silverlight, and 2 Listbox for Silverlight Standard And now finally...in this Issue: Nigel Sampson, Jeremy Likness, Dan Wahlin, Kunal Chowdhurry, Alex Knight, Wei-Meng Lee, Michael Crump, Jesse Liberty, Peter Kuhn, Michael Washington, Tau Sick, Max Paulousky, Damian Schenkelman Above the Fold: Silverlight: "Demystifying Silverlight Dependency Properties" Dan Wahlin WP7: "Using Windows Phone Gestures as Triggers" Nigel Sampson Expression Blend: "PathListBox: making data look cool" Alex Knight From SilverlightCream.com: Using Windows Phone Gestures as Triggers Nigel Sampson blogged about WP7 Gestures, the Toolkit, and using Gestures as Triggers, and actually makes it looks simple :) Jounce Part 9: Static and Dynamic Module Management Jeremy Likness has episode 9 of his explanation of his MVVM framework, Jounce, up... and a big discussion of Modules and Module Management from a Jounce perspective. Demystifying Silverlight Dependency Properties Dan Wahlin takes a page from one of his teaching opportunities, and shares his knowledge of Dependency Properties with us... beginning with what they are, defining them in code, and demonstrating their use. Customizing Silverlight ChildWindow Style using Blend Kunal Chowdhurry has a great post up about getting your Child Windows to match the look & feel of the rest of youra app... plus a bunch of Blend goodness thrown in. PathListBox: making data look cool File this post by Alex Knight in the 'holy crap' file along with the others in this series! ... just check out that cool Ticker Style Path ListBox at the top of the blog... too cool! Web Access in Windows Phone 7 Apps Wei-Meng Lee has the 3rd part of his series on WP7 development up and in this one is discussing Web Access... I mean *discussing* it... tons of detail, code, and explanation... great post. Prevent your Silverlight XAP file from caching in your browser. Michael Crump helps relieve stress on Silverlight developers everywhere by exploring how to avoid caching of your XAP in the browser... (WPFS) MVVM Light Toolkit: Soup To Nuts Part I Jesse Liberty continues his Windows Phone from Scratch series with a new segment exploring Laurent Bugnion's MVVMLight Toolkit beginning with acquiring and installing the toolkit, then proceeds to discuss linking the View and ViewModel, the ViewModel Locator, and page navigation. Silverlight: Making a DateTimePicker Peter Kuhn attacks a problem that crops up on the forums a lot -- a DateTimePicker control for Silverlight... following the "It's so simple to build one yourself" advice, he did so, and provides the code for all of us! Windows Phone 7 Animated Button Press Michael Washington took exception to button presses that gave no visual feedback and produced a behavior that does just that. Using TweetSharp in a Windows Phone 7 app Tau Sick demonstrates using TweetSharp to put a twitter feed into a WP7 app, as he did in "Hangover Helper"... all the instructions from getting Tweeetshaprt to the code necessary. Bindable Application Bar Extensions for Windows Phone 7 Max Paulousky has a post discussing some real extensions to the ApplicationBar for WP7.. he begins with a bindable application bar by Nicolas Humann that I've missed, probably because his blog is in French... and extends it to allow using DelegateCommand. How to: Load Prism modules packaged in a separate XAP file in an OOB application Damian Schenkelman posts about Prism, AppModules in separate XAPs and running OOB... if you've tried this, you know it's a hassle.. Damian has the solution. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

TFS 2010 SDK: Integrating Twitter with TFS Programmatically

- by Tarun Arora

Technorati Tags: Team Foundation Server 2010,TFS API,Integrate Twitter TFS,TFS Programming,ALM,TwitterSharp Friends at ‘Twitter Sharp’ have created a wonderful .net API for twitter. With this blog post i will try to show you a basic TFS – Twitter integration scenario where i will retrieve the Team Project details programmatically and then publish these details on my twitter page. In future blogs i will be demonstrating how to create a windows service to capture the events raised by TFS and then publishing them in your social eco-system. Download Working Demo: Integrate Twitter - Tfs Programmatically 1. Setting up Twitter API Download Tweet Sharp from => https://github.com/danielcrenna/tweetsharp Before you can start playing around with this, you will need to register an application on twitter. This is because Twitter uses the OAuth authentication protocol and will not issue an Access token unless your application is registered with them. Go to https://dev.twitter.com/ and register your application Once you have registered your application, you will need ‘Customer Key’, ‘Customer Secret’, ‘Access Token’, ‘Access Token Secret’ 2. Connecting to Twitter using the Tweet Sharp API Create a new C# windows forms project and add reference to ‘Hammock.ClientProfile’, ‘Newtonsoft.Json’, ‘TweetSharp’ Add the following keys to the App.config (Note – The values for the keys below are in correct and if you try and connect using them then you will get an authorization failure error). Add a new class ‘TwitterProxy’ and use the following code to connect to the TwitterService (Read more about OAuthentication - http://dev.twitter.com/pages/auth) using System;using System.Collections.Generic;using System.Linq;using System.Text;using System.Configuration;using TweetSharp; namespace WindowsFormsApplication2{ public class TwitterProxy { private static string _hero; private static string _consumerKey; private static string _consumerSecret; private static string _accessToken; private static string _accessTokenSecret; public static TwitterService ConnectToTwitter() { _consumerKey = ConfigurationManager.AppSettings["ConsumerKey"]; _consumerSecret = ConfigurationManager.AppSettings["ConsumerSecret"]; _accessToken = ConfigurationManager.AppSettings["AccessToken"]; _accessTokenSecret = ConfigurationManager.AppSettings["AccessTokenSecret"]; return new TwitterService(_consumerKey, _consumerSecret, _accessToken, _accessTokenSecret); } }} Time to Tweet! _twitterService = Proxy.TwitterProxy.ConnectToTwitter(); _twitterService.SendTweet("Hello World"); SendTweet will return the TweetStatus, If you do not get a 200 OK status that means you have failed authentication, please revisit the Access tokens. --RESPONSE: https://api.twitter.com/1/statuses/update.json HTTP/1.1 200 OK X-Transaction: 1308476106-69292-41752 X-Frame-Options: SAMEORIGIN X-Runtime: 0.03040 X-Transaction-Mask: a6183ffa5f44ef11425211f25 Pragma: no-cache X-Access-Level: read-write X-Revision: DEV X-MID: bd8aa0abeccb6efba38bc0a391a73fab98e983ea Cache-Control: no-cache, no-store, must-revalidate, pre-check=0, post-check=0 Content-Type: application/json; charset=utf-8 Date: Sun, 19 Jun 2011 09:35:06 GMT Expires: Tue, 31 Mar 1981 05:00:00 GMT Last-Modified: Sun, 19 Jun 2011 09:35:06 GMT Server: hi Vary: Accept-Encoding Content-Encoding: Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Transfer-Encoding: chunked 3. Integrate with TFS In my blog post Connect to TFS Programmatically i have in depth demonstrated how to connect to TFS using the TFS API. 1: // Update the AppConfig with the URI of the Team Foundation Server you want to connect to, Make sure you have View Team Project Collection Details permissions on the server 2: private static string _myUri = ConfigurationManager.AppSettings["TfsUri"]; 3: private static TwitterService _twitterService = null; 4: 5: private void button1_Click(object sender, EventArgs e) 6: { 7: lblNotes.Text = string.Empty; 8: 9: try 10: { 11: StringBuilder notes = new StringBuilder(); 12: 13: _twitterService = Proxy.TwitterProxy.ConnectToTwitter(); 14: 15: _twitterService.SendTweet("Hello World"); 16: 17: TfsConfigurationServer configurationServer = 18: TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri)); 19: 20: CatalogNode catalogNode = configurationServer.CatalogNode; 21: 22: ReadOnlyCollection<CatalogNode> tpcNodes = catalogNode.QueryChildren( 23: new Guid[] { CatalogResourceTypes.ProjectCollection }, 24: false, CatalogQueryOptions.None); 25: 26: // tpc = Team Project Collection 27: foreach (CatalogNode tpcNode in tpcNodes) 28: { 29: Guid tpcId = new Guid(tpcNode.Resource.Properties["InstanceId"]); 30: TfsTeamProjectCollection tpc = configurationServer.GetTeamProjectCollection(tpcId); 31: 32: notes.AppendFormat("{0} Team Project Collection : {1}{0}", Environment.NewLine, tpc.Name); 33: _twitterService.SendTweet(String.Format("http://Lunartech.codeplex.com - Connecting to Team Project Collection : {0} ", tpc.Name)); 34: 35: // Get catalog of tp = 'Team Projects' for the tpc = 'Team Project Collection' 36: var tpNodes = tpcNode.QueryChildren( 37: new Guid[] { CatalogResourceTypes.TeamProject }, 38: false, CatalogQueryOptions.None); 39: 40: foreach (var p in tpNodes) 41: { 42: notes.AppendFormat("{0} Team Project : {1} - {2}{0}", Environment.NewLine, p.Resource.DisplayName, "This is an open source project hosted on codeplex"); 43: _twitterService.SendTweet(String.Format(" Connected to Team Project: '{0}' – '{1}' ", p.Resource.DisplayName, "This is an open source project hosted on codeplex")); 44: } 45: } 46: notes.AppendFormat("{0} Updates posted on Twitter : {1} {0}", Environment.NewLine, @"http://twitter.com/lunartech1"); 47: lblNotes.Text = notes.ToString(); 48: } 49: catch (Exception ex) 50: { 51: lblError.Text = " Message : " + ex.Message + (ex.InnerException != null ? " Inner Exception : " + ex.InnerException : string.Empty); 52: } 53: } The extensions you can build integrating TFS and Twitter are incredible! Share this post :

Read the article

Dynamically switching the theme in Orchard

- by Bertrand Le Roy

It may sound a little puzzling at first, but in Orchard CMS, more than one theme can be active at any given time. The reason for that is that we have an extensibility point that allows a module (or a theme) to participate in the choice of the theme to use, for each request. The motivation for building the theme engine this way was to enable developers to switch themes based on arbitrary criteria, such as user preferences or the user agent (if you want to serve a mobile theme for phones for example). The choice is made between the active themes, which is why there is a difference between the default theme and the active themes. In order to have a say in the choice of the theme, all you have to do is implement IThemeSelector. That interface is quite simple as it only has one method, GetTheme, that takes the current RequestContext and returns a ThemeSelectorResult or null if the implementation of the interface does not want to participate in the current request (we'll see an example in a moment). ThemeSelectorResult itself is just a ThemeName string property and an integer Priority. We're using a priority so that an arbitrary number of implementations of IThemeSelector can contribute to the choice of a theme. If you look for existing implementations of the interface in Orchard, you'll find four: AdminThemeSelector: selects the TheAdmin theme with a very high priority (100) if the current request is for a page that is part of the admin. Otherwise, null is returned, which enables other implementations to choose the theme. PreviewThemeSelector: selects the preview theme if there is one, with a high priority (90), and null otherwise. This enables administrators to view the site under a different theme while everybody else continues to see the current default theme. SiteThemeSelector: this is the implementation that is doing what you expect most of the time, which is to get the current theme from site settings and set it with a priority of –5. SafeModeThemeSelector: this is the fallback implementation, which should almost never win. It sets the theme as the safe mode theme, which has no style and just uses the default templates for everything. The priority is very low (-100). While this extensibility mechanism is great to have, I wanted to bring that level of choice into the hands of the site administrator rather than just developers. In order to achieve that, I built the Vandelay Theme Picker module. The module provides administration UI to create rules for theme selection. It provides its own extensibility point (the IThemeSelectionRule interface) and one implementation of a rule: UserAgentThemeSelectorRule. This rule gets the current user agent from the context and tries to match it with a regular expression that the administrator can configure in the admin UI. You can for example configure a rule with a regular expression that matches IE6 and serve a different subtheme where the stylesheet has been tweaked for such an antique browser. Another possible configuration is to detect mobile devices from their agent string and serve the mobile theme. All those operations can be done with this module entirely from the admin UI, without writing a line of code. The module also offers the administrator the opportunity to inject a link into the front-end in a specific zone and with a specific position that enables the user to switch to the default theme if he wishes to. This is especially useful for sites that use a mobile theme but still want to allow users to use the full desktop site. While the module is nice and flexible, it may be overkill. On my own personal blog, I have only two active themes: the desktop theme and the mobile theme. I'm fine with going into code to change the criteria on which to switch the theme, so I'm not using my own Theme Picker module. Instead, I made the mobile theme a theme with code (in other words there is a csproj file in the theme). The project includes a single C# file, my MobileThemeSelector for which the code is the following: public class MobileThemeSelector : IThemeSelector { private static readonly Regex _Msie678 = new Regex(@"^Mozilla\/4\.0 $compatible; MSIE [678]" + @"\.0; Windows NT \d\.\d(.*)$$", RegexOptions.IgnoreCase); private ThemeSelectorResult _requestCache; private bool _requestCached; public ThemeSelectorResult GetTheme(RequestContext context) { if (_requestCached) return _requestCache; _requestCached = true; var userAgent = context.HttpContext.Request.UserAgent; if (userAgent.IndexOf("phone", StringComparison.OrdinalIgnoreCase) != -1 || _Msie678.IsMatch(userAgent) || userAgent.IndexOf("windows live writer", StringComparison.OrdinalIgnoreCase) != -1) { _requestCache = new ThemeSelectorResult { Priority = 10, ThemeName = "VuLuMobile" }; } return _requestCache; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The theme selector selects the current theme for Internet Explorer versions 6 to 8, for phones, and for Windows Live Writer (so that the theme that is used when I write posts is as simple as possible). What's interesting here is that it's the theme that selects itself here, based on its own criteria. This should give you a good panorama of what's possible in terms of dynamic theme selection in Orchard. I hope you find some fun uses for it. As usual, I can't wait to see what you're going to come up with…

Read the article

Calculated Columns in Entity Framework Code First Migrations

- by David Paquette

I had a couple people ask me about calculated properties / columns in Entity Framework this week. The question was, is there a way to specify a property in my C# class that is the result of some calculation involving 2 properties of the same class. For example, in my database, I store a FirstName and a LastName column and I would like a FullName property that is computed from the FirstName and LastName columns. My initial answer was: 1: public string FullName 2: { 3: get { return string.Format("{0} {1}", FirstName, LastName); } 4: } Of course, this works fine, but this does not give us the ability to write queries using the FullName property. For example, this query: 1: var users = context.Users.Where(u => u.FullName.Contains("anan")); Would result in the following NotSupportedException: The specified type member 'FullName' is not supported in LINQ to Entities. Only initializers, entity members, and entity navigation properties are supported. It turns out there is a way to support this type of behavior with Entity Framework Code First Migrations by making use of Computed Columns in SQL Server. While there is no native support for computed columns in Code First Migrations, we can manually configure our migration to use computed columns. Let’s start by defining our C# classes and DbContext: 1: public class UserProfile 2: { 3: public int Id { get; set; } 4: 5: public string FirstName { get; set; } 6: public string LastName { get; set; } 7: 8: [DatabaseGenerated(DatabaseGeneratedOption.Computed)] 9: public string FullName { get; private set; } 10: } 11: 12: public class UserContext : DbContext 13: { 14: public DbSet<UserProfile> Users { get; set; } 15: } The DatabaseGenerated attribute is needed on our FullName property. This is a hint to let Entity Framework Code First know that the database will be computing this property for us. Next, we need to run 2 commands in the Package Manager Console. First, run Enable-Migrations to enable Code First Migrations for the UserContext. Next, run Add-Migration Initial to create an initial migration. This will create a migration that creates the UserProfile table with 3 columns: FirstName, LastName, and FullName. This is where we need to make a small change. Instead of allowing Code First Migrations to create the FullName property, we will manually add that column as a computed column. 1: public partial class Initial : DbMigration 2: { 3: public override void Up() 4: { 5: CreateTable( 6: "dbo.UserProfiles", 7: c => new 8: { 9: Id = c.Int(nullable: false, identity: true), 10: FirstName = c.String(), 11: LastName = c.String(), 12: //FullName = c.String(), 13: }) 14: .PrimaryKey(t => t.Id); 15: Sql("ALTER TABLE dbo.UserProfiles ADD FullName AS FirstName + ' ' + LastName"); 16: } 17: 18: 19: public override void Down() 20: { 21: DropTable("dbo.UserProfiles"); 22: } 23: } Finally, run the Update-Database command. Now we can query for Users using the FullName property and that query will be executed on the database server. However, we encounter another potential problem. Since the FullName property is calculated by the database, it will get out of sync on the object side as soon as we make a change to the FirstName or LastName property. Luckily, we can have the best of both worlds here by also adding the calculation back to the getter on the FullName property: 1: [DatabaseGenerated(DatabaseGeneratedOption.Computed)] 2: public string FullName 3: { 4: get { return FirstName + " " + LastName; } 5: private set 6: { 7: //Just need this here to trick EF 8: } 9: } Now we can both query for Users using the FullName property and we also won’t need to worry about the FullName property being out of sync with the FirstName and LastName properties. When we run this code: 1: using(UserContext context = new UserContext()) 2: { 3: UserProfile userProfile = new UserProfile {FirstName = "Chanandler", LastName = "Bong"}; 4: 5: Console.WriteLine("Before saving: " + userProfile.FullName); 6: 7: context.Users.Add(userProfile); 8: context.SaveChanges(); 9: 10: Console.WriteLine("After saving: " + userProfile.FullName); 11: 12: UserProfile chanandler = context.Users.First(u => u.FullName == "Chanandler Bong"); 13: Console.WriteLine("After reading: " + chanandler.FullName); 14: 15: chanandler.FirstName = "Chandler"; 16: chanandler.LastName = "Bing"; 17: 18: Console.WriteLine("After changing: " + chanandler.FullName); 19: 20: } We get this output: It took a bit of work, but finally Chandler’s TV Guide can be delivered to the right person. The obvious downside to this implementation is that the FullName calculation is duplicated in the database and in the UserProfile class. This sample was written using Visual Studio 2012 and Entity Framework 5. Download the source code here.

Read the article

What should you bring to the table as a Software Architect?

- by Ahmad Mageed

There have been many questions with good answers about the role of a Software Architect (SA) on StackOverflow and Programmers SE. I am trying to ask a slightly more focused question than those. The very definition of a SA is broad so for the sake of this question let's define a SA as follows: A Software Architect guides the overall design of a project, gets involved with coding efforts, conducts code reviews, and selects the technologies to be used. In other words, I am not talking about managerial rest and vest at the crest (further rhyming words elided) types of SAs. If I were to pursue any type of SA position I don't want to be away from coding. I might sacrifice some time to interface with clients and Business Analysts etc., but I am still technically involved and I'm not just aware of what's going on through meetings. With these points in mind, what should a SA bring to the table? Should they come in with a mentality of "laying down the law" (so to speak) and enforcing the usage of certain tools to fit "their way," i.e., coding guidelines, source control, patterns, UML documentation, etc.? Or should they specify initial direction and strategy then be laid back and jump in as needed to correct the ship's direction? Depending on the organization this might not work. An SA who relies on TFS to enforce everything may struggle to implement their plan at an employer that only uses StarTeam. Similarly, an SA needs to be flexible depending on the stage of the project. If it's a fresh project they have more choices, whereas they might have less for existing projects. Here are some SA stories I have experienced as a way of sharing some background in hopes that answers to my questions might also shed some light on these issues: I've worked with an SA who code reviewed literally every single line of code of the team. The SA would do this for not just our project but other projects in the organization (imagine the time spent on this). At first it was useful to enforce certain standards, but later it became crippling. FxCop was how the SA would find issues. Don't get me wrong, it was a good way to teach junior developers and force them to think of the consequences of their chosen approach, but for senior developers it was seen as somewhat draconian. One particular SA was against the use of a certain library, claiming it was slow. This forced us to write tons of code to achieve things differently while the other library would've saved us a lot of time. Fast forward to the last month of the project and the clients were complaining about performance. The only solution was to change certain functionality to use the originally ignored approach despite early warnings from the devs. By that point a lot of code was thrown out and not reusable, leading to overtime and stress. Sadly the estimates used for the project were based on the old approach which my project was forbidden from using so it wasn't an appropriate indicator for estimation. I would hear the PM say "we've done this before," when in reality they had not since we were using a new library and the devs working on it were not the same devs used on the old project. The SA who would enforce the usage of DTOs, DOs, BOs, Service layers and so on for all projects. New devs had to learn this architecture and the SA adamantly enforced usage guidelines. Exceptions to usage guidelines were made when it was absolutely difficult to follow the guidelines. The SA was grounded in their approach. Classes for DTOs and all CRUD operations were generated via CodeSmith and database schemas were another similar ball of wax. However, having used this setup everywhere, the SA was not open to new technologies such as LINQ to SQL or Entity Framework. I am not using this post as a platform for venting. There were positive and negative aspects to my experiences with the SA stories mentioned above. My questions boil down to: What should an SA bring to the table? How can they strike a balance in their decision making? Should one approach an SA job (as defined earlier) with the mentality that they must enforce certain ground rules? Anything else to consider? Thanks! I'm sure these job tasks are easily extended to people who are senior devs or technical leads, so feel free to answer at that capacity as well.

Read the article

ASSIMP in my program is much slower to import than ASSIMP view program

- by Marco

The problem is really simple: if I try to load with the function aiImportFileExWithProperties a big model in my software (around 200.000 vertices), it takes more than one minute. If I try to load the very same model with ASSIMP view, it takes 2 seconds. For this comparison, both my software and Assimp view are using the dll version of the library at 64 bit, compiled by myself (Assimp64.dll). This is the relevant piece of code in my software // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; cout << "Loading " << pFile << "... "; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,80.f); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE, aiPrimitiveType_LINE | aiPrimitiveType_POINT); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file scene = (aiScene*)aiImportFileExWithProperties(pFile.c_str(), ppsteps | /* default pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges //aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); if(!scene){ cout << aiGetErrorString() << endl; return 0; } this is the relevant piece of code in assimp view code // default pp steps unsigned int ppsteps = aiProcess_CalcTangentSpace | // calculate tangents and bitangents if possible aiProcess_JoinIdenticalVertices | // join identical vertices/ optimize indexing aiProcess_ValidateDataStructure | // perform a full validation of the loader's output aiProcess_ImproveCacheLocality | // improve the cache locality of the output vertices aiProcess_RemoveRedundantMaterials | // remove redundant materials aiProcess_FindDegenerates | // remove degenerated polygons from the import aiProcess_FindInvalidData | // detect invalid model data, such as invalid normal vectors aiProcess_GenUVCoords | // convert spherical, cylindrical, box and planar mapping to proper UVs aiProcess_TransformUVCoords | // preprocess UV transformations (scaling, translation ...) aiProcess_FindInstances | // search for instanced meshes and remove them by references to one master aiProcess_LimitBoneWeights | // limit bone weights to 4 per vertex aiProcess_OptimizeMeshes | // join small meshes, if possible; aiProcess_SplitByBoneCount | // split meshes with too many bones. Necessary for our (limited) hardware skinning shader 0; aiPropertyStore* props = aiCreatePropertyStore(); aiSetImportPropertyInteger(props,AI_CONFIG_IMPORT_TER_MAKE_UVS,1); aiSetImportPropertyFloat(props,AI_CONFIG_PP_GSN_MAX_SMOOTHING_ANGLE,g_smoothAngle); aiSetImportPropertyInteger(props,AI_CONFIG_PP_SBP_REMOVE,nopointslines ? aiPrimitiveType_LINE | aiPrimitiveType_POINT : 0 ); aiSetImportPropertyInteger(props,AI_CONFIG_GLOB_MEASURE_TIME,1); //aiSetImportPropertyInteger(props,AI_CONFIG_PP_PTV_KEEP_HIERARCHY,1); // Call ASSIMPs C-API to load the file g_pcAsset->pcScene = (aiScene*)aiImportFileExWithProperties(g_szFileName, ppsteps | /* configurable pp steps */ aiProcess_GenSmoothNormals | // generate smooth normal vectors if not existing aiProcess_SplitLargeMeshes | // split large, unrenderable meshes into submeshes aiProcess_Triangulate | // triangulate polygons with more than 3 edges aiProcess_ConvertToLeftHanded | // convert everything to D3D left handed space aiProcess_SortByPType | // make 'clean' meshes which consist of a single typ of primitives 0, NULL, props); aiReleasePropertyStore(props); As you can see the code is nearly identical because I copied from assimp view. What could be the reason for such a difference in performance? The two software are using the same dll Assimp64.dll (compiled in my computer with vc++ 2010 express) and the same function aiImportFileExWithProperties to load the model, so I assume that the actual code employed is the same. How is it possible that the function aiImportFileExWithProperties is 100 times slower when called by my sotware than when called by assimp view? What am I missing? I am not good with dll, dynamic and static libraries so I might be missing something obvious. ------------------------------ UPDATE I found out the reason why the code is going slower. Basically I was running my software with "Start debugging" in VC++ 2010 Express. If I run the code outside VC++ 2010 I get same performance of assimp view. However now I have a new question. Why does the dll perform slower in VC++ debugging? I compiled it in release mode without debugging information. Is there any way to have the dll go fast in debugmode i.e. not debugging the dll? Because I am interested in debugging only my own code, not the dll that I assume is already working fine. I do not want to wait 2 minutes every time I want to load my software to debug. Does this request make sense?

Read the article

NDepend 4 – First Steps

- by Ricardo Peres

Introduction Thanks to Patrick Smacchia I had the chance to test NDepend 4. I can only say: awesome! This will be the first of a series of posts on NDepend, where I will talk about my discoveries. Keep in mind that I am just starting to use it, so more experienced users may find these too basic, I just hope I don’t say anything foolish! I must say that I am in no way affiliated with NDepend and I never actually met Patrick. Installation No installation program – a curious decision, I’m not against it -, just unzip the files to a folder and run the executable. It will optionally register itself with Visual Studio 2008, 2010 and 11 as well as RedGate’s Reflector; also, it automatically looks for updates. NDepend can either be used as a stand-alone program (with or without a GUI) or from within Visual Studio or Reflector. Getting Started One thing that really pleases me is the Getting Started section of the stand-alone, with links to pages on NDepend’s web site, featuring detailed explanations, which usually include screenshots and small videos (<5 minutes). There’s also an How do I with hierarchical navigation that guides us to through the major features so that we can easily find what we want. Usage There are two basic ways to use NDepend: Analyze .NET solutions, projects or assemblies; Compare two versions of the same assembly. I have so far not used NDepend to compare assemblies, so I will first talk about the first option. After selecting a solution and some of its projects, it generates a single HTML page with an highly detailed report of the analysis it produced. This includes some metrics such as number of lines of code, IL instructions, comments, types, methods and properties, the calculation of the cyclomatic complexity, coupling and lots of others indicators, typically grouped by type, namespace and assembly. The HTML also includes some nice diagrams depicting assembly dependencies, type and method relative proportions (according to the number of IL instructions, I guess) and assembly analysis relating to abstractness and stability. Useful, I would say. Then there’s the rules; NDepend tests the target assemblies against a set of more than 120 rules, grouped in categories Code Quality, Object Oriented Design, Design, Architecture and Layering, Dead Code, Visibility, Naming Conventions, Source Files Organization and .NET Framework Usage. The full list can be configured on the application, and an explanation of each rule can be found on the web site. Rules can be validated, violated and violated in a critical manner, and the HTML will contain the violated rules, their queries – more on this later - and results. The HTML uses some nice JavaScript effects, which allow paging and sorting of tables, so its nice to use. Similar to the rules, there are some queries that display results for a number (about 200) questions grouped as Object Oriented Design, API Breaking Changes (for assembly version comparison), Code Diff Summary (also for version comparison) and Dead Code. The difference between queries and rules is that queries are not classified as passes, violated or critically violated, just present results. The queries and rules are expressed through CQLinq, which is a very powerful LINQ derivative specific to code analysis. All of the included rules and queries can be enabled or disabled and new ones can be added, with intellisense to help. Besides the HTML report file, the NDepend application can be used to explore all analysis results, compare different versions of analysis reports and to run custom queries. Comparison to Other Analysis Tools Unlike StyleCop, NDepend only works with assemblies, not source code, so you can’t expect it to be able to enforce brackets placement, for example. It is more similar to FxCop, but you don’t have the option to analyze at the IL level, that is, other that the number of IL instructions and the complexity. What’s Next In the next days I’ll continue my exploration with a real-life test case. References The NDepend web site is http://www.ndepend.com/. Patrick keeps an updated blog on http://codebetter.com/patricksmacchia/ and he regularly monitors StackOverflow for questions tagged NDepend, which you can find on http://stackoverflow.com/questions/tagged/ndepend. The default list of CQLinq rules, queries and statistics can be found at http://www.ndepend.com/DefaultRules/webframe.html. The syntax itself is described at http://www.ndepend.com/Doc_CQLinq_Syntax.aspx and its features at http://www.ndepend.com/Doc_CQLinq_Features.aspx.

Read the article

Yet another blog about IValueConverter

- by codingbloke

After my previous blog on a Generic Boolean Value Converter I thought I might as well blog up another IValueConverter implementation that I use. The Generic Boolean Value Converter effectively converters an input which only has two possible values to one of two corresponding objects. The next logical step would be to create a similar converter that can take an input which has multiple (but finite and discrete) values to one of multiple corresponding objects. To put it more simply a Generic Enum Value Converter. Now we already have a tool that can help us in this area, the ResourceDictionary. A simple IValueConverter implementation around it would create a StringToObjectConverter like so:- StringToObjectConverter using System; using System.Windows; using System.Windows.Data; using System.Linq; using System.Windows.Markup; namespace SilverlightApplication1 { [ContentProperty("Items")] public class StringToObjectConverter : IValueConverter { public ResourceDictionary Items { get; set; } public string DefaultKey { get; set; } public StringToObjectConverter() { DefaultKey = "__default__"; } public virtual object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { if (value != null && Items.Contains(value.ToString())) return Items[value.ToString()]; else return Items[DefaultKey]; } public virtual object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { return Items.FirstOrDefault(kvp => value.Equals(kvp.Value)).Key; } } } There are some things to note here. The bulk of managing the relationship between an object instance and the related string key is handled by the Items property being an ResourceDictionary. Also there is a catch all “__default__” key value which allows for only a subset of the possible input values to mapped to an object with the rest falling through to the default. We can then set one of these up in Xaml:- <local:StringToObjectConverter x:Key="StatusToBrush"> <ResourceDictionary> <SolidColorBrush Color="Red" x:Key="Overdue" /> <SolidColorBrush Color="Orange" x:Key="Urgent" /> <SolidColorBrush Color="Silver" x:Key="__default__" /> </ResourceDictionary> </local:StringToObjectConverter> You could well imagine that in the model being bound these key names would actually be members of an enum. This still works due to the use of ToString in the Convert method. Hence the only requirement for the incoming object is that it has a ToString implementation which generates a sensible string instead of simply the type name. I can’t imagine right now a scenario where this converter would be used in a TwoWay binding but there is no reason why it can’t. I prefer to avoid leaving the ConvertBack throwing an exception if that can be be avoided. Hence it just enumerates the KeyValuePair entries to find a value that matches and returns the key its mapped to. Ah but now my sense of balance is assaulted again. Whilst StringToObjectConverter is quite happy to accept an enum type via the Convert method it returns a string from the ConvertBack method not the original input enum type that arrived in the Convert. Now I could address this by complicating the ConvertBack method and examining the targetType parameter etc. However I prefer to a different approach, deriving a new EnumToObjectConverter class instead. EnumToObjectConverter using System; namespace SilverlightApplication1 { public class EnumToObjectConverter : StringToObjectConverter { public override object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { string key = Enum.GetName(value.GetType(), value); return base.Convert(key, targetType, parameter, culture); } public override object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { string key = (string)base.ConvertBack(value, typeof(String), parameter, culture); return Enum.Parse(targetType, key, false); } } } This is a more belts and braces solution with specific use of Enum.GetName and Enum.Parse. Whilst its more explicit in that the a developer has to choose to use it, it is only really necessary when using TwoWay binding, in OneWay binding the base StringToObjectConverter would serve just as well. The observant might note that there is actually no “Generic” aspect to this solution in the end. The use of a ResourceDictionary eliminates the need for that.

Read the article

strange sqares like hints in Silverlight application?

- by lina

Good day! Strange square appears on mouse hover on text boxes, buttons, etc (something like hint) in a silverlight navigation application - how can I remove it? a scrin shot an example .xaml page: <Code:BasePage x:Class="CAP.Views.Main" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:Code="clr-namespace:CAP.Code" d:DesignWidth="640" d:DesignHeight="480" Title="?????? ??????? ???????? ??? ?????"> <Grid x:Name="LayoutRoot"> <Grid.RowDefinitions> <RowDefinition Height="103*" /> <RowDefinition Height="377*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="120*" /> <ColumnDefinition Width="520*" /> </Grid.ColumnDefinitions> <Image Height="85" HorizontalAlignment="Left" Name="image1" Stretch="Fill" VerticalAlignment="Top" Width="84" Margin="12,0,0,0" ImageFailed="image1_ImageFailed" Source="/CAP;component/Images/My-Computer.png" /> <TextBlock Grid.Column="1" Height="Auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="0,12,0,0" Name="textBlock1" Text="Good day!" VerticalAlignment="Top" FontFamily="Verdana" FontSize="16" Width="345" FontWeight="Bold" /> <TextBlock Grid.Column="1" Grid.Row="1" TextWrapping="Wrap" Height="299" HorizontalAlignment="Left" Name="textBlock2" VerticalAlignment="Top" FontFamily="Verdana" FontSize="14" Width="441" > <Run Text="Some text "/><LineBreak/><LineBreak/><Run Text="and so on"/> <LineBreak/> </TextBlock> </Grid> xaml.cs: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Navigation; using CAP.Code; namespace CAP.Views { public partial class Main : BasePage { public Main() : base() { InitializeComponent(); MapBuilder.AddToMap(new SiteMapUnit() { Caption = "???????", RelativeUrl = "Main" },true); ((App)Application.Current).Mainpage.tvMainMenu.SelectedItems.Clear(); } // Executes when the user navigates to this page. protected override void OnNavigatedTo(NavigationEventArgs e) { } private void image1_ImageFailed(object sender, ExceptionRoutedEventArgs e) { } protected override string[] NeededPermission() { return new string[0]; } } } MainPage.xaml <UserControl x:Class="CAP.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Code="clr-namespace:CAP.Code" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:uriMapper="clr-namespace:System.Windows.Navigation;assembly=System.Windows.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation" mc:Ignorable="d" Margin="0,0,0,0" Width="auto" Height="auto" xmlns:dataInput="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input"> <ScrollViewer Width="auto" Height="auto" BorderBrush="White" BorderThickness="0" Margin="0,0,0,0" x:Name="sV" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Auto" > <ScrollViewer.Content> <Grid Width="auto" Height="auto" x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}" Margin="0,0,0,0"> <StackPanel Width="auto" Height="auto" Orientation="Vertical" Margin="250,0,0,50"> <Border x:Name="ContentBorder2" Margin="0,0,0,0" >  <StackPanel Orientation="Vertical" Height="82" Width="Auto" HorizontalAlignment="Right" Margin="0,0,0,0" DataContext="{Binding}"> <TextBlock HorizontalAlignment="Right" Foreground="White" x:Name="ApplicationNameTextBlock4" Style="{StaticResource ApplicationNameStyle}" FontSize="20" Text="?????? ???????" Margin="20,16,20,0"/> <StackPanel Orientation="Horizontal" HorizontalAlignment="Right"> <Image x:Name="imDoor" Visibility="Collapsed" MouseEnter="imDoor_MouseEnter" MouseLeave="imDoor_MouseLeave" Height="24" Stretch="Fill" Width="25" Margin="10,0,10,0" Source="/CAP;component/Images/sm_white_doors.png" MouseLeftButtonDown="bTest_Click" /> <TextBlock x:Name="bLogout" MouseEnter="bLogout_MouseEnter" MouseLeave="bLogout_MouseLeave" TextDecorations="Underline" Margin="0,6,20,4" Height="23" Text="?????" HorizontalAlignment="Right" Visibility="Collapsed" MouseLeftButtonDown="bTest_Click" FontFamily="Verdana" FontSize="13" FontWeight="Normal" Foreground="#FF1C1C92" /> </StackPanel> </StackPanel> </Border> <Border x:Name="bSiteMap" Margin="0,0,0,0" > <StackPanel x:Name="spSiteMap" Orientation="Horizontal" Height="20" Width="Auto" HorizontalAlignment="Left" Margin="0,0,0,0" DataContext="{Binding}">  </StackPanel> </Border> <Border Width="auto" Height="auto" x:Name="ContentBorder" Margin="0,0,0,0" > <navigation:Frame x:Name="ContentFrame" Style="{StaticResource ContentFrameStyle}" Source="Main" Navigated="ContentFrame_Navigated" NavigationFailed="ContentFrame_NavigationFailed" ToolTipService.ToolTip=" " Margin="0,0,0,0"> <navigation:Frame.UriMapper> <uriMapper:UriMapper>  <uriMapper:UriMapping Uri="RegistrateClient" MappedUri="/Views/Client/RegistrateClient.xaml"/>  </uriMapper:UriMapper> </navigation:Frame.UriMapper> </navigation:Frame> </Border> </StackPanel> <Grid x:Name="NavigationGrid" Style="{StaticResource NavigationGridStyle}" Margin="0,0,0,0" Background="{x:Null}" > <StackPanel Orientation="Vertical" Height="Auto" Width="250" HorizontalAlignment="Center" Margin="0,0,0,50" DataContext="{Binding}"> <Image Width="150" Height="90" HorizontalAlignment="Center" VerticalAlignment="Top" Source="/CAP;component/Images/logo__au.png" Margin="0,20,0,70"/> <Border x:Name="BrandingBorder" MinHeight="222" Width="250" Style="{StaticResource BrandingBorderStyle3}" HorizontalAlignment="Center" Opacity="60" Margin="0,0,0,0"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/papka.png"/> </Border.Background> <Grid Width="250" x:Name="LichniyCabinet" Margin="0,10,0,0" HorizontalAlignment="Center" Height="211"> <Grid.ColumnDefinitions> <ColumnDefinition Width="19*" /> <ColumnDefinition Width="62*" /> <ColumnDefinition Width="151*" /> <ColumnDefinition Width="18*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="13" /> <RowDefinition Height="24" /> <RowDefinition Height="35" /> <RowDefinition Height="35" /> <RowDefinition Height="43" /> <RowDefinition Height="28" /> <RowDefinition Height="32*" /> </Grid.RowDefinitions> <TextBlock Visibility="Visible" Grid.Row="2" Height="23" HorizontalAlignment="Left" x:Name="tLogin" Text="?????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Margin="1,0,0,0" Grid.Column="1" /> <TextBlock Visibility="Visible" FontFamily="Verdana" FontSize="13" Foreground="White" Height="23" HorizontalAlignment="Left" x:Name="tPassw" Text="??????" VerticalAlignment="Top" Grid.Row="3" Grid.Column="1" /> <TextBox Visibility="Visible" Grid.Column="2" Grid.Row="2" Height="24" HorizontalAlignment="Left" x:Name="logLogin" VerticalAlignment="Top" Width="150" /> <PasswordBox Visibility="Visible" Code:DefaultButtonService.DefaultButton="{Binding ElementName=bLogin}" PasswordChar="*" Height="24" HorizontalAlignment="Left" x:Name="logPassword" VerticalAlignment="Top" Width="150" Grid.Column="2" Grid.Row="3" /> <Button x:Name="bLogin" MouseEnter="bLogin_MouseEnter" MouseLeave="bLogin_MouseLeave" Visibility="Visible" Content="?????" Grid.Column="2" Grid.Row="4" Click="Button_Click" Height="23" HorizontalAlignment="Left" Margin="81,0,0,0" VerticalAlignment="Top" Width="70" /> <TextBlock MouseLeftButtonDown="ForgotPassword_MouseLeftButtonDown" MouseEnter="ForgotPassword_MouseEnter" MouseLeave="ForgotPassword_MouseLeave" Visibility="Visible" TextDecorations="Underline" Grid.ColumnSpan="2" Grid.Row="4" Height="23" HorizontalAlignment="Left" x:Name="ForgotPassword" Text="?????? ???????" VerticalAlignment="Top" Foreground="White" FontFamily="Verdana" FontSize="13" Grid.Column="1" /> <TextBlock MouseEnter="tbRegistration_MouseEnter" MouseLeave="tbRegistration_MouseLeave" MouseLeftButtonDown="tbRegistration_MouseLeftButtonDown" Grid.Column="2" Grid.Row="6" Height="23" x:Name="tbRegistration" TextDecorations="Underline" Text="???????????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" TextAlignment="Center" HorizontalAlignment="Center" Foreground="#FF1C1C92" FontWeight="Normal" Margin="0,0,57,0" /> <TextBlock Cursor="Arrow" Height="23" HorizontalAlignment="Left" Margin="11,-3,0,0" Text="?????? ???????" VerticalAlignment="Top" Grid.ColumnSpan="3" Grid.RowSpan="2" FontFamily="Verdana" FontSize="13" FontWeight="Bold" Foreground="White" /> <Image Visibility="Collapsed" Height="70" x:Name="imUser" Stretch="Fill" Width="70" Grid.ColumnSpan="2" Margin="11,0,0,0" Grid.Row="2" Grid.RowSpan="2" Source="/CAP;component/Images/user2.png" /> <TextBlock x:Name="tbHello" Grid.Column="2" Visibility="Collapsed" Grid.Row="2" Height="auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="6,0,0,0" Text="" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Width="145" /> </Grid> </Border> <Border x:Name="MenuBorder" Margin="0,0,0,50" Width="250" Visibility="Collapsed"> <StackPanel x:Name="spMenu" Width="240" HorizontalAlignment="Left"> <telerikNavigation:RadTreeView x:Name="tvMainMenu" Width="240" Selected="TreeView1_Selected" SelectedValuePath="Text" telerik:Theming.Theme="Windows7" FontFamily="Verdana" FontSize="12"/> </StackPanel> </Border> </StackPanel> </Grid> <Border x:Name="FooterBorder" VerticalAlignment="Bottom" Width="auto" Height="76"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/footer2.png" /> </Border.Background> <TextBlock x:Name="tbFooter" Height="24" Width="auto" Margin="0,20,0,0" TextAlignment="Center" HorizontalAlignment="Stretch" VerticalAlignment="Center" Foreground="White" FontFamily="Verdana" FontSize="11"> </TextBlock> </Border> </Grid> </ScrollViewer.Content> </ScrollViewer> </UserControl> MainPage.xaml.cs using System; using System.Collections.Generic; using System.Linq; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Navigation; using CAP.Code; using CAP.Registrator; using System.Windows.Input; using System.ComponentModel.DataAnnotations; using System.Windows.Browser; using Telerik.Windows.Controls; using System.Net; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Navigation; using System.Windows.Shapes; namespace CAP { public partial class MainPage { public App Appvars = Application.Current as App; private readonly RegistratorClient registrator; public SiteMapBuilder builder; public MainPage() { InitializeComponent(); sV.SetIsMouseWheelScrollingEnabled(true); builder = new SiteMapBuilder(spSiteMap); try { //working with service } catch { this.ContentFrame.Navigate(new Uri(String.Format("ErrorPage"), UriKind.RelativeOrAbsolute)); } } /// Recursive method to update the correct scrollviewer (if exists) private ScrollViewer CheckParent(FrameworkElement element) { ScrollViewer _result = element as ScrollViewer; if (element != null && _result == null) { FrameworkElement _temp = element.Parent as FrameworkElement; _result = CheckParent(_temp); } return _result; } // If an error occurs during navigation, show an error window private void ContentFrame_NavigationFailed(object sender, NavigationFailedEventArgs e) { e.Handled = true; ChildWindow errorWin = new ErrorWindow(e.Uri); errorWin.Show(); } } }

Read the article

Top Reasons You Need A User Engagement Platform

- by Michael Snow

Guest post by: Amit Sircar, Senior Sales Consultant, Oracle Deliver complex enterprise functionality through a simple intuitive and unified User Interface (UI) The modern enterprise contains a wide range of applications that are used to manage the business and drive competitive advantages. Organizations respond by creating a complex structure that results in a functional and management grouping of users. Each of these groups of users requires access to multiple applications and information sources in order to perform their job functions. This leads to the lack of a unified view of enterprise information, inconsistent user interfaces and disjointed security. To be effective, portals must be designed from the end-user perspective, enabling the user to accomplish as many tasks as possible while visiting the fewest number of portals. This requires rethinking the way that portals are built, moving from a functional business unit perspective to a user-focused, process-oriented point of view. Oracle WebCenter provides the Common User Experience Architecture that allows organizations to seamlessly present a unified view of enterprise information tailored to a particular user’s role and preferences. This architecture provides the best practices, design patterns and delivery mechanism for myriad services, applications, and data sources. In order to serve as a primary system of access, Oracle WebCenter also provides access to unstructured content and to other users via integrated search, service-oriented artifacts, content management, and collaboration tools. Provide a modern and engaging experience without modifying the core business application Web 2.0 technologies such as blogs, wikis, forums or social media sites are having a profound impact in the public internet. These technologies can be leveraged by enterprises to add significant value to the business. Organizations need to integrate these technologies directly into their business applications while continuing to meet their security and governance needs. To deliver richer connections and become a more agile and intelligent business, WebCenter provides an enterprise portal platform that contains pre-integrated, standards-based Enterprise 2.0 services. These Enterprise 2.0 services can be easily accessed, integrated and utilized by users. By giving users the ability to use and integrate Enterprise 2.0 services such as tags, links, wikis, activities, blogs or social networking directly with their portals and applications, they are empowered to make richer connections, optimize their productivity, and ultimately increase the value of their applications. Foster a collaborative experience The organizational workplace has undergone a major change in the last decade. With increasing globalization and a distributed workforce, project teams may be physically separated by large distances. Online collaboration technologies are becoming a critical resource to enable virtual teams to share information and work together effectively. Oracle WebCenter delivers dynamic business communities with rich Services to empower teams to quickly and efficiently manage their information, applications, projects, and people without requiring IT assistance. It brings together the latest technology around Enterprise 2.0 and social computing, communities, personal productivity, and ad-hoc team interactions without any development effort. It enables the sharing and collaboration on team content, focusing an organization’s valuable resources on solving business problems, tapping into new ideas, and reducing time-to-market. Mobile Support The traditional workplace dynamics that required employees to access their work applications from their desktops have undergone a fundamental shift. Employees were used to primarily working from company offices and utilized an IT-issued computer for performing their job functions. With the introduction of flexible work hours and the growth of remote workers, more and more employees need the ability to remain productive even when they do not have access to a computer via the use of tablets and smartphones. In addition, customers and citizens have come to expect 24x7 access to resources and websites from wherever they are located. Tablets and smartphones have empowered everyone to quickly access services they need anytime and from any place. WebCenter provides out of the box capabilities to deliver the mobile experience in a seamless manner. Seeded device profiles and toolkits within WebCenter can be used to render the same web pages into multiple target devices such iPads, iPhones and android devices. Web designers can preview the portal using the built in simulator, make necessary updates and then deploy their UI design for the targeted device. Conclusion The competitive economy and resource constraints facing organizations today require them to find ways to make their applications, portals and Web sites more agile and intelligent and their knowledge workers more productive no matter where they are located. Organizations need to provide faster access to relevant information and resources, enhance existing applications and business processes with rich Enterprise 2.0 services, and seamlessly deliver content to mobile platforms. Oracle WebCenter successfully meets these challenges by providing the modern user experience platform for the enterprise and the Web.

Read the article

College Courses through distance learning

- by Matt

I realize this isn't really a programming question, but didn't really know where to post this in the stackexchange and because I am a computer science major i thought id ask here. This is pretty unique to the programmer community since my degree is about 95% programming. I have 1 semester left, but i work full time. I would like to finish up in December, but to make things easier i like to take online classes whenever I can. So, my question is does anyone know of any colleges that offer distance learning courses for computer science? I have been searching around and found a few potential classes, but not sure yet. I would like to gather some classes and see what i can get approval for. Class I need: Only need one C SC 437 Geometric Algorithms C SC 445 Algorithms C SC 473 Automata Only need one C SC 452 Operating Systems C SC 453 Compilers/Systems Software While i only need of each of the above courses i still need to take two more electives. These also have to be upper 400 level classes. So i can take multiple in each category. Some other classes I can take are: CSC 447 - Green Computing CSC 425 - Computer Networking CSC 460 - Database Design CSC 466 - Computer Security I hoping to take one or two of these courses over the summer. If not, then online over the regular semester would be ok too. Any help in helping find these classes would be awesome. Maybe you went to a college that offered distance learning. Some of these classes may be considered to be graduate courses too. Descriptions are listed below if you need. Thanks! Descriptions Computer Security This is an introductory course covering the fundamentals of computer security. In particular, the course will cover basic concepts of computer security such as threat models and security policies, and will show how these concepts apply to specific areas such as communication security, software security, operating systems security, network security, web security, and hardware-based security. Computer Networking Theory and practice of computer networks, emphasizing the principles underlying the design of network software and the role of the communications system in distributed computing. Topics include routing, flow and congestion control, end-to-end protocols, and multicast. Database Design Functions of a database system. Data modeling and logical database design. Query languages and query optimization. Efficient data storage and access. Database access through standalone and web applications. Green Computing This course covers fundamental principles of energy management faced by designers of hardware, operating systems, and data centers. We will explore basic energy management option in individual components such as CPUs, network interfaces, hard drives, memory. We will further present the energy management policies at the operating system level that consider performance vs. energy saving tradeoffs. Finally we will consider large scale data centers where energy management is done at multiple layers from individual components in the system to shutting down entries subset of machines. We will also discuss energy generation and delivery and well as cooling issues in large data centers. Compilers/Systems Software Basic concepts of compilation and related systems software. Topics include lexical analysis, parsing, semantic analysis, code generation; assemblers, loaders, linkers; debuggers. Operating Systems Concepts of modern operating systems; concurrent processes; process synchronization and communication; resource allocation; kernels; deadlock; memory management; file systems. Algorithms Introduction to the design and analysis of algorithms: basic analysis techniques (asymptotics, sums, recurrences); basic design techniques (divide and conquer, dynamic programming, greedy, amortization); acquiring an algorithm repertoire (sorting, median finding, strong components, spanning trees, shortest paths, maximum flow, string matching); and handling intractability (approximation algorithms, branch and bound). Automata Introduction to models of computation (finite automata, pushdown automata, Turing machines), representations of languages (regular expressions, context-free grammars), and the basic hierarchy of languages (regular, context-free, decidable, and undecidable languages). Geometric Algorithms The study of algorithms for geometric objects, using a computational geometry approach, with an emphasis on applications for graphics, VLSI, GIS, robotics, and sensor networks. Topics may include the representation and overlaying of maps, finding nearest neighbors, solving linear programming problems, and searching geometric databases.

Read the article

The clock hands of the buffer cache

- by Tony Davis

Over a leisurely beer at our local pub, the Waggon and Horses, Phil Factor was holding forth on the esoteric, but strangely poetic, language of SQL Server internals, riddled as it is with 'sleeping threads', 'stolen pages', and 'memory sweeps'. Generally, I remain immune to any twinge of interest in the bowels of SQL Server, reasoning that there are certain things that I don't and shouldn't need to know about SQL Server in order to use it successfully. Suddenly, however, my attention was grabbed by his mention of the 'clock hands of the buffer cache'. Back at the office, I succumbed to a moment of weakness and opened up Google. He wasn't lying. SQL Server maintains various memory buffers, or caches. For example, the plan cache stores recently-used execution plans. The data cache in the buffer pool stores frequently-used pages, ensuring that they may be read from memory rather than via expensive physical disk reads. These memory stores are classic LRU (Least Recently Updated) buffers, meaning that, for example, the least frequently used pages in the data cache become candidates for eviction (after first writing the page to disk if it has changed since being read into the cache). SQL Server clearly needs some mechanism to track which pages are candidates for being cleared out of a given cache, when it is getting too large, and it is this mechanism that is somewhat more labyrinthine than I previously imagined. Each page that is loaded into the cache has a counter, a miniature "wristwatch", which records how recently it was last used. This wristwatch gets reset to "present time", each time a page gets updated and then as the page 'ages' it clicks down towards zero, at which point the page can be removed from the cache. But what is SQL Server is suffering memory pressure and urgently needs to free up more space than is represented by zero-counter pages (or plans etc.)? This is where our 'clock hands' come in. Each cache has associated with it a "memory clock". Like most conventional clocks, it has two hands; one "external" clock hand, and one "internal". Slava Oks is very particular in stressing that these names have "nothing to do with the equivalent types of memory pressure". He's right, but the names do, in that peculiar Microsoft tradition, seem designed to confuse. The hands do relate to memory pressure; the cache "eviction policy" is determined by both global and local memory pressures on SQL Server. The "external" clock hand responds to global memory pressure, in other words pressure on SQL Server to reduce the size of its memory caches as a whole. Global memory pressure – which just to confuse things further seems sometimes to be referred to as physical memory pressure – can be either external (from the OS) or internal (from the process itself, e.g. due to limited virtual address space). The internal clock hand responds to local memory pressure, in other words the need to reduce the size of a single, specific cache. So, for example, if a particular cache, such as the plan cache, reaches a defined "pressure limit" the internal clock hand will start to turn and a memory sweep will be performed on that cache in order to remove plans from the memory store. During each sweep of the hands, the usage counter on the cache entry is reduced in value, effectively moving its "last used" time to further in the past (in effect, setting back the wrist watch on the page a couple of hours) and increasing the likelihood that it can be aged out of the cache. There is even a special Dynamic Management View, sys.dm_os_memory_cache_clock_hands, which allows you to interrogate the passage of the clock hands. Frequently turning hands equates to excessive memory pressure, which will lead to performance problems. Two hours later, I emerged from this rather frightening journey into the heart of SQL Server memory management, fascinated but still unsure if I'd learned anything that I'd put to any practical use. However, I certainly began to agree that there is something almost Tolkeinian in the language of the deep recesses of SQL Server. Cheers, Tony.

Read the article

NoSQL Java API for MySQL Cluster: Questions & Answers

- by Mat Keep

The MySQL Cluster engineering team recently ran a live webinar, available now on-demand demonstrating the ClusterJ and ClusterJPA NoSQL APIs for MySQL Cluster, and how these can be used in building real-time, high scale Java-based services that require continuous availability. Attendees asked a number of great questions during the webinar, and I thought it would be useful to share those here, so others are also able to learn more about the Java NoSQL APIs. First, a little bit about why we developed these APIs and why they are interesting to Java developers. ClusterJ and Cluster JPA ClusterJ is a Java interface to MySQL Cluster that provides either a static or dynamic domain object model, similar to the data model used by JDO, JPA, and Hibernate. A simple API gives users extremely high performance for common operations: insert, delete, update, and query. ClusterJPA works with ClusterJ to extend functionality, including - Persistent classes - Relationships - Joins in queries - Lazy loading - Table and index creation from object model By eliminating data transformations via SQL, users get lower data access latency and higher throughput. In addition, Java developers have a more natural programming method to directly manage their data, with a complete, feature-rich solution for Object/Relational Mapping. As a result, the development of Java applications is simplified with faster development cycles resulting in accelerated time to market for new services. MySQL Cluster offers multiple NoSQL APIs alongside Java: - Memcached for a persistent, high performance, write-scalable Key/Value store, - HTTP/REST via an Apache module - C++ via the NDB API for the lowest absolute latency. Developers can use SQL as well as NoSQL APIs for access to the same data set via multiple query patterns – from simple Primary Key lookups or inserts to complex cross-shard JOINs using Adaptive Query Localization Marrying NoSQL and SQL access to an ACID-compliant database offers developers a number of benefits. MySQL Cluster’s distributed, shared-nothing architecture with auto-sharding and real time performance makes it a great fit for workloads requiring high volume OLTP. Users also get the added flexibility of being able to run real-time analytics across the same OLTP data set for real-time business insight. OK – hopefully you now have a better idea of why ClusterJ and JPA are available. Now, for the Q&A. Q & A Q. Why would I use Connector/J vs. ClusterJ? A. Partly it's a question of whether you prefer to work with SQL (Connector/J) or objects (ClusterJ). Performance of ClusterJ will be better as there is no need to pass through the MySQL Server. A ClusterJ operation can only act on a single table (e.g. no joins) - ClusterJPA extends that capability Q. Can I mix different APIs (ie ClusterJ, Connector/J) in our application for different query types? A. Yes. You can mix and match all of the API types, SQL, JDBC, ODBC, ClusterJ, Memcached, REST, C++. They all access the exact same data in the data nodes. Update through one API and new data is instantly visible to all of the others. Q. How many TCP connections would a SessionFactory instance create for a cluster of 8 data nodes? A. SessionFactory has a connection to the mgmd (management node) but otherwise is just a vehicle to create Sessions. Without using connection pooling, a SessionFactory will have one connection open with each data node. Using optional connection pooling allows multiple connections from the SessionFactory to increase throughput. Q. Can you give details of how Cluster J optimizes sharding to enhance performance of distributed query processing? A. Each data node in a cluster runs a Transaction Coordinator (TC), which begins and ends the transaction, but also serves as a resource to operate on the result rows. While an API node (such as a ClusterJ process) can send queries to any TC/data node, there are performance gains if the TC is where most of the result data is stored. ClusterJ computes the shard (partition) key to choose the data node where the row resides as the TC. Q. What happens if we perform two primary key lookups within the same transaction? Are they sent to the data node in one transaction? A. ClusterJ will send identical PK lookups to the same data node. Q. How is distributed query processing handled by MySQL Cluster ? A. If the data is split between data nodes then all of the information will be transparently combined and passed back to the application. The session will connect to a data node - typically by hashing the primary key - which then interacts with its neighboring nodes to collect the data needed to fulfil the query. Q. Can I use Foreign Keys with MySQL Cluster A. Support for Foreign Keys is included in the MySQL Cluster 7.3 Early Access release Summary The NoSQL Java APIs are packaged with MySQL Cluster, available for download here so feel free to take them for a spin today! Key Resources MySQL Cluster on-line demo MySQL ClusterJ and JPA On-demand webinar MySQL ClusterJ and JPA documentation MySQL ClusterJ and JPA whitepaper and tutorial

Read the article

Part 1 - 12c Database and WLS - Overview

- by Steve Felts

The download of Oracle 12c database became available on June 25, 2013. There are some big new features in 12c database and WebLogic Server will take advantage of them. Immediately, we will support using 12c database and drivers with WLS 10.3.6 and 12.1.1. When the next version of WLS ships, additional functionality will be supported (those rows in the table below with all "No" values will get a "Yes). The following table maps the Oracle 12c Database features supported with various combinations of currently available WLS releases, 11g and 12c Drivers, and 11g and 12c Databases. Feature WebLogic Server 10.3.6/12.1.1 with 11g drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 11g drivers and 12c DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 11gR2 DB WebLogic Server 10.3.6/12.1.1 with 12c drivers and 12c DB JDBC replay No No No Yes (Active GridLink only in 10.3.6, add generic in 12.1.1) Multi Tenant Database No Yes (except set container) No Yes (except set container) Dynamic switching between Tenants No No No No Database Resident Connection pooling (DRCP) No No No No Oracle Notification Service (ONS) auto configuration No No No No Global Database Services (GDS) No Yes (Active GridLink only) No Yes (Active GridLink only) JDBC 4.1 (using ojdbc7.jar files & JDK 7) No No Yes Yes The My Oracle Support (MOS) document covering this is "WebLogic Server 12.1.1 and 10.3.6 Support for Oracle 12c Database [ID 1564509.1]" at the link https://support.oracle.com/epmos/faces/DocumentDisplay?id=1564509.1. The following documents are also key references:12c Oracle Database Developer Guide http://docs.oracle.com/cd/E16655_01/appdev.121/e17620/toc.htm 12c Oracle Database Administrator's Guide http://docs.oracle.com/cd/E16655_01/server.121/e17636/toc.htm . I plan to write some related blog articles not to duplicate existing product documentation but to introduce the features, provide some examples, and tie together some information to make it easier to understand. How do you get started with 12c? The easiest way is to point your data source at a 12c database. The only change on the WLS side is to update the URL in your data source (assuming that you are not just upgrading your database). You can continue to use the 11.2.0.3 driver jar files that shipped with WLS 10.3.6 or 12.1.1. You shouldn't see any changes in your application. You can take advantage of enhancements on the database side that don't affect the mid-tier. On the WLS side, you can take advantage of using Global Data Service or connecting to a tenant in a multi-tenant database transparently. If you want to use the 12c client jar files, it's a bit of work because they aren't shipped with WLS and you can't just drop in ojdbc6.jar as in the old days. You need to use a matched set of jar files and they need to come before existing jar files in the CLASSPATH. The MOS article is written from the standpoint that you need to get the jar files directly - download almost 1G and install over 600M footprint to get 15 jar files. Assuming that you have the database installed and you can get access to the installation (or ask the DBA), you need to copy the 15 jar files to each machine with a WLS installation and get them in your CLASSPATH. You can play with setting the PRE_CLASSPATH but the more practical approach may be to just update WL_HOME/common/bin/commEnv.sh directly. There's a change in the transaction completion behavior (read the MOS) so if you think you might run into that, you will want to set -Doracle.jdbc.autoCommitSpecCompliant=false. Also if you are running with Active GridLink, you must set -Doracle.ucp.PreWLS1212Compatible=true (how's that for telling you that this is fixed in WLS 12.1.2). Once you get the configuration out of the way, you can start using the new ojdbc7.jar in place of the ojdbc6.jar to get the new JDBC 4.1 API's. You can also start using Application Continuity. This feature is also known as JDBC Replay because when a connection fails you get a new one with all JDBC operations up to the failure point automatically replayed. As you might expect, there are some limitations but it's an interesting feature. Obviously I'm going to focus on the 12c database features that we can leverage in WLS data source. You will need to read other sources or the product documentation to get all of the new features.

Read the article

How to create a PeopleCode Application Package/Application Class using PeopleTools Tables

- by Andreea Vaduva

This article describes how - in PeopleCode (Release PeopleTools 8.50) - to enable a grid without enabling each static column, using a dynamic Application Class. The goal is to disable the following grid with three columns “Effort Date”, ”Effort Amount” and “Charge Back” , when the Check Box “Finished with task” is selected , without referencing each static column; this PeopleCode could be used dynamically with any grid. If the check box “Finished with task” is cleared, the content of the grid columns is editable (and the buttons “+” and “-“ are available): So, you create an Application Package “CLASS_EXTENSIONS” that contains an Application Class “EWK_ROWSET”. This Application Class is defined with Class extends “ Rowset” and you add two news properties “Enabled” and “Visible”: After creating this Application Class, you use it in two PeopleCode Events : Rowinit and FieldChange : This code is very ‘simple’, you write only one command : ” &ERS2.Enabled = False” → and the entire grid is “Enabled”… and you can use this code with any Grid! So, the complete PeopleCode to create the Application Package is (with explanation in [….]) : ******Package CLASS_EXTENSIONS : [Name of the Package: CLASS_EXTENSIONS] --Beginning of the declaration part------------------------------------------------------------------------------ class EWK_ROWSET extends Rowset; [Definition Class EWK_ROWSET as a subclass of Class Rowset] method EWK_ROWSET(&RS As Rowset); [Constructor is the Method with the same name of the Class] property boolean Visible get set; property boolean Enabled get set; [Definition of the property “Enabled” in read/write] private [Before the word “private”, all the declarations are publics] method SetDisplay(&DisplaySW As boolean, &PropName As string, &ChildSW As boolean); instance boolean &EnSW; instance boolean &VisSW; instance Rowset &NextChildRS; instance Row &NextRow; instance Record &NextRec; instance Field &NextFld; instance integer &RowCnt, &RecCnt, &FldCnt, &ChildRSCnt; instance integer &i, &j, &k; instance CLASS_EXTENSIONS:EWK_ROWSET &ERSChild; [For recursion] Constant &VisibleProperty = "VISIBLE"; Constant &EnabledProperty = "ENABLED"; end-class; --End of the declaration part------------------------------------------------------------------------------ method EWK_ROWSET [The Constructor] /+ &RS as Rowset +/ %Super = &RS; end-method; get Enabled /+ Returns Boolean +/; Return &EnSW; end-get; set Enabled /+ &NewValue as Boolean +/; &EnSW = &NewValue; %This.InsertEnabled=&EnSW; %This.DeleteEnabled=&EnSW; %This.SetDisplay(&EnSW, &EnabledProperty, False); [This method is called when you set this property] end-set; get Visible /+ Returns Boolean +/; Return &VisSW; end-get; set Visible /+ &NewValue as Boolean +/; &VisSW = &NewValue; %This.SetDisplay(&VisSW, &VisibleProperty, False); end-set; method SetDisplay [The most important PeopleCode Method] /+ &DisplaySW as Boolean, +/ /+ &PropName as String, +/ /+ &ChildSW as Boolean +/ [Not used in our example] &RowCnt = %This.ActiveRowCount; &NextRow = %This.GetRow(1); [To know the structure of a line ] &RecCnt = &NextRow.RecordCount; For &i = 1 To &RowCnt [Loop for each Line] &NextRow = %This.GetRow(&i); For &j = 1 To &RecCnt [Loop for each Record] &NextRec = &NextRow.GetRecord(&j); &FldCnt = &NextRec.FieldCount; For &k = 1 To &FldCnt [Loop for each Field/Record] &NextFld = &NextRec.GetField(&k); Evaluate Upper(&PropName) When = &VisibleProperty &NextFld.Visible = &DisplaySW; Break; When = &EnabledProperty; &NextFld.Enabled = &DisplaySW; [Enable each Field/Record] Break; When-Other Error "Invalid display property; Must be either VISIBLE or ENABLED" End-Evaluate; End-For; End-For; If &ChildSW = True Then [If recursion] &ChildRSCnt = &NextRow.ChildCount; For &j = 1 To &ChildRSCnt [Loop for each Rowset child] &NextChildRS = &NextRow.GetRowset(&j); &ERSChild = create CLASS_EXTENSIONS:EWK_ROWSET(&NextChildRS); &ERSChild.SetDisplay(&DisplaySW, &PropName, &ChildSW); [For each Rowset child, call Method SetDisplay with the same parameters used with the Rowset parent] End-For; End-If; End-For; end-method; ******End of the Package CLASS_EXTENSIONS:[Name of the Package: CLASS_EXTENSIONS] About the Author: Pascal Thaler joined Oracle University in 2005 where he is a Senior Instructor. His area of expertise is Oracle Peoplesoft Technology and he delivers the following courses: For Developers: PeopleTools Overview, PeopleTools I &II, Batch Application Engine, Language Oriented Object PeopleCode, Administration Security For Administrators : Server Administration & Installation, Database Upgrade & Data Management Tools For Interface Users: Integration Broker (Web Service)

Read the article

BIP and Mapviewer Mash Up I

- by Tim Dexter

I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

Read the article

SQL SERVER – Weekly Series – Memory Lane – #053 – Final Post in Series

- by Pinal Dave

It has been a fantastic journey to write memory lane series for an entire year. This series gave me the opportunity to go back and see what I have contributed to this blog throughout the last 7 years. This was indeed fantastic series as this provided me the opportunity to witness how technology has grown throughout the year and how I have progressed in my career while writing this blog post. This series was indeed fantastic experience readers as many joined during the last few years and were not sure what they have missed in recent years. Let us continue with the final episode of the Memory Lane Series. Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Get Current User – Get Logged In User Here is the straight script which list logged in SQL Server users. Disable All Triggers on a Database – Disable All Triggers on All Servers Question : How to disable all the triggers for a database? Additionally, how to disable all the triggers for all servers? For answer execute the script in the blog post. Importance of Master Database for SQL Server Startup I have received following questions many times. I will list all the questions here and answer them together. What is the purpose of Master database? Should our backup Master database? Which database is must have database for SQL Server for startup? Which are the default system database created when SQL Server 2005 is installed for the first time? What happens if Master database is corrupted? Answers to all of the questions are very much related. 2008 DECLARE Multiple Variables in One Statement SQL Server is a great product and it has many features which are very unique to SQL Server. Regarding feature of SQL Server where multiple variable can be declared in one statement, it is absolutely possible to do. 2009 How to Enable Index – How to Disable Index – Incorrect syntax near ‘ENABLE’ Many times I have seen that the index is disabled when there is a large update operation on the table. Bulk insert of very large file updates in any table using SSIS is usually preceded by disabling the index and followed by enabling the index. I have seen many developers running the following query to disable the index. 2010 List of all the Views from Database Many emails I received suggesting that they have hundreds of the view and now have no clue what is going on and how many of them have indexes and how many does not have an index. Some even asked me if there is any way they can get a list of the views with the property of Index along with it. Here is the quick script which does exactly the same. You can also include many other columns from the same view. Minimum Maximum Memory – Server Memory Options I was recently reading about SQL Server Memory Options over here. While reading this one line really caught my attention is minimum value allowed for maximum memory options. The default setting for min server memory is 0, and the default setting for max server memory is 2147483647. The minimum amount of memory you can specify for max server memory is 16 megabytes (MB). 2011 Fundamentals of Columnstore Index There are two kinds of storage in a database. Row Store and Column Store. Row store does exactly as the name suggests – stores rows of data on a page – and column store stores all the data in a column on the same page. These columns are much easier to search – instead of a query searching all the data in an entire row whether the data are relevant or not, column store queries need only to search a much lesser number of the columns. How to Ignore Columnstore Index Usage in Query In summary the question in simple words “How can we ignore using the column store index in selective queries?” Very interesting question – you can use I can understand there may be the cases when the column store index is not ideal and needs to be ignored the same. You can use the query hint IGNORE_NONCLUSTERED_COLUMNSTORE_INDEX to ignore the column store index. The SQL Server Engine will use any other index which is best after ignoring the column store index. 2012 Storing Variable Values in Temporary Array or Temporary List SQL Server does not support arrays or a dynamic length storage mechanism like list. Absolutely there are some clever workarounds and few extra-ordinary solutions but everybody can;t come up with such solution. Additionally, sometime the requirements are very simple that doing extraordinary coding is not required. Here is the simple case. Move Database Files MDF and LDF to Another Location It is not common to keep the Database on the same location where OS is installed. Usually Database files are in SAN, Separate Disk Array or on SSDs. This is done usually for performance reason and manageability perspective. Now the challenges comes up when database which was installed at not preferred default location and needs to move to a different location. Here is the quick tutorial how you can do it. UNION ALL and ORDER BY – How to Order Table Separately While Using UNION ALL If your requirement is such that you want your top and bottom query of the UNION resultset independently sorted but in the same result set you can add an additional static column and order by that column. Let us re-create the same scenario. Copy Data from One Table to Another Table – SQL in Sixty Seconds #031 – Video http://www.youtube.com/watch?v=FVWIA-ACMNo Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Search Results

Search found 11138 results on 446 pages for 'dynamic linq'.

Page 408/446 | < Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415 | Next Page >

- by Shaun

- by Tarun Arora

- by Angelo-Oracle

- by lalan

- by The Un-T Guy

- by Richard Lefebvre

- by [email protected]

- by Robert May

- by Dave Campbell

- by Tarun Arora

- by Bertrand Le Roy

- by David Paquette

- by Ahmad Mageed

- by Marco

- by Ricardo Peres

- by codingbloke

- by lina

- by Michael Snow

- by Matt

- by Tony Davis

- by Mat Keep

- by Steve Felts

- by Andreea Vaduva

- by Tim Dexter

- by Pinal Dave

< Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415 | Next Page >